QTFX-F1/F2 Flame Effect User Manual
Contents
1. QTFX F1 F2 Flame Effect User Manual 160 470UK amp 160 471UK User Manual QTFX F1 F2 160 470 1UK QTFX F1 F2 Flame Effect For indoor use only Caution Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty 1 General Introduction Really heat up your party with this mesmerising flame effect Reaching up to a height of 1 5m the silk flame flutters in the air whilst lit up with a combination of 10mm LEDs giving the appearance of a hot flame It is low maintenance and quick to set up making it perfect for event and hire companies or as a permanent fixture on stage Features Reaches up to a height of 1 5m Red and blue 10mm LED QTFX F1 RGB Colour mixing QTFX F2 High speed fans Replacement silk flames available Ref 160 472UK User Manual QTFX F1 F2 160 470 1UK 15 Technical specification rue 36 x 10mm R 12 Light Source 36 x 10mm R 32 B 4 G 12 B 12 Powxchannets NAO Pbimensions Sion weit Lu 13 Disposal bd AR Please disposal of the unserviceable device according to the current statutory requirement Copyright protected by QTX Light Ltd qtxlight 11 User Manual QTFX F1 F2 160 470 1UK User Manual QTFX F1 F2 160 470 1UK 14 DMX Operation for QTFX F2 2 Package Contents Please check the contents to ensure that the product has been received in Value good condition 000 255 Re2. d Colour 0 100 Red Colour 0 100 Dimming 000 255 Green Colour 0 100 Dimming QTFX Flame User s Guide x 1pcs Power Cord x 1pcs effect x 1pcs If you find any accessory is missing or the machine has arrived with any 6 000 255 Overall Dimmer problems please contact your local dealer at once Do not try to fix this item yourself or you will lose the warranty Please keep the original package and invoice for any possible replacement or returned demand 3 Setup 1 Unpack the Flame machine and place in a safe location where it will not be tampered with 2 Unwrap the silk flame and place in to the slot between the LEDs Plug in the supplied IEC power lead 4 Turn the power switch on and the LEDs will light up fans will start to blow and the silk flame will start to rise 5 For the QTFX F2 model read section 13 about the digital controls and DMX options qtxlight 10 qtxlight User Manual QTFX F1 F2 160 470 1UK 5 Installation advice The fixture may be placed anywhere on a stage or in a display providing nothing obstructs the front of the machine fan or vents pathway Never install in places where the fixture will be exposed to rain high humidity extreme temperatures changes or restricted ventilation 6 Caution To prevent Mortal Electrical Risk and Long Life Operation For your safety please kindly pay attention to all of the warnings listed below qtxlight Always plug in the pow
3. er plug last and disconnect from the mains when the device is not in use or before cleaning Do not install and operate the device in rain or extreme heat moisture or dusty environments This device is for indoor use only and in a dry environment Do not switch on immediately but wait until it reaches to room temperature if the device has been exposed to drastic temperature fluctuations Do not shake the device and avoid brute force when installing or operating Do not use the device during thunderstorms and please disconnect the power Do not use solvents or aggressive detergent to clean the device Use a soft and clean cloth Do not modify the device or the connected power cord without authorisation User Manual QTFX F1 F2 13 Operation for QTFX F2 160 470 1UK i OOOO MEHU UP GOWN ENTER LED Secondary Display Display ADDR A001 A512 SOUn COLr SHnD FAdE AUTO CHND SLND LED A001 a512 soun o cor Fade AUTO o NO NAST oN qtxlight Turn the LEDs ON OFF LED Display on off Manual Mode for setting one static colour User Manual QTFX F1 F2 160 470 1UK User Manual QTFX F1 F2 160 470 1UK 12 QTFX F2 Layout 7 Connect with power supply The ground wire must be connected Use the plug to connect to the main power supply as following 1 8 Quick Trouble Shooting If the unit is not functioning properly n 5 8 1 Check if main power is on and fuse hasn t blown 8 2 The
4. remote control is plugged in correctly in to the socket 8 3 Check there is fluid in the tank 4 5 8 4 Check that the pipe is pushed down to the bottom of the tank 8 5 Check the correct fluid has been used 1 DMX DIP Switch addresses 2 DMX IN 3 DMX OUT 4 POWER ON OFF 5 IEC POWER IN qtxlight s qtxlight User Manual QTFX F1 F2 160 470 1UK User Manual QTFX F1 F2 160 470 1UK 9 Replacing Fuse 11 QTFX F1 Layout Disconnect from the main power supply first then remove the fuse holder above the IEC Socket to reveal the fuse Replace the correct fuse rating as stated on lighting or user guide Then lock the fuse holder cover back into place 10 General Maintenance To maintain optimum performance and minimize wear the item should be cleaned frequently Usage and environment are contributing factors in determining frequency As a general rule fixtures should be cleaned after use to avoid dust build up and blockages which can result in poor performances overheating and breakages Be sure to power off fixture before conducting maintenance 1 H qm 2 Unplug fixture from power Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components Clean the external case when the fixture is cold with a dry cloth or tissue and drag dirt and grime to the outside case 1 Power ON OFF 2 IEC Power IN OUT qtxlight i qtxlight 7
Download Pdf Manuals
Related Search