User`s Manual
Contents
1. or integrated with any product s returned to Opticis for repair under warranty or not Warranty Limitation and Exclusion Opticis shall have no further obligation under the foregoing limited warranty if the product has been damaged due to abuse misuse neglect accident unusual physical or electrical stress unauthorized modifications tampering alterations or service other than by Opticis or its authorized agents causes other than from ordinary use or failure to properly use the product in the application for which said product is intended Dispose of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative a consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product 1 10 Warranty Information 2015 Opticis Co Lt2. unit DVFX 100 Rx Remote DVI Display S video Composite video Source DVI Source D Connect Power cables into 3 pin power connector of MVDF Connect SC connector of optical cable to the optical video output port of MVDF 3 Connect the opposite side of SC connector into SC port of One Fiber DVI Receiver DVFX 100 RX For power connect supplied 5V Power supply to DC jack of One Fiber DVI Receiver After that attach it to the DVI display directly Connect the output of source equipment to MVDF using source cable If the output signal of source equipment is active Status LED on MVDF will turn ON Yellow The MVDF provides auto source detection First in first out and video output priority when 4 video input signals are connected at the same time It gives priority at DVI VGA S Video and Composite video Above all procedures are connected turn ON power unit Ensure the Power LED on MVDF will turn ON Green 1 8 Basic Connection Setup Technical Specifications Item Input Output Supporting resolution EDID Max distance Power supplying Power consumption Auto signal detection LED indicator Dimension Operating temperature Details DVI VGA Composite and S Video 1 x SC multi mode fiber SC terminated 1 core multi mode fiber 50um Up to WUXGA 1920x1200 at 60Hz for DVI and VGA input Fixed resolution of SXGA 12080x1024 at 60Hz for S Video and Com
3. 0um without any data compression or latency To recover electrical DVI signal one 1 fiber DVI receiver DVFX 100 e Do not sterilize the device as the delicate electronics cannot withstand this RX should be used at the display end procedure Use only the proprietary surgical display power supply for the display Completely secure the connection between the DC power cord and the extension cord Never operate the device immediately after transportation from a cold location to a warm location To connect to an universal power supply use an attachment plug appropriate for the power outlet as outlined in the Technical Specifications section of this manual Unplug the device if it is not to be used for an extended period of time To disconnect the cord unscrew the plug first then pull the cord out by the plug Never pull the cord itself Allow adequate air circulation to prevent internal heat buildup Do not place the device on surfaces rugs blankets etc or near materials curtains draperies that may block the ventilation slots The device is cooled by natural convection and has no fan Pay close attention to the cleaning instructions in this manual A deviation may cause damage Do not install the device near sunlight excessive dust mechanical vibration or shock Do not operate with the glass device screen facing downward Handle the device with care Changes or modificatio
4. d All Rights Reserved version 1 0 01 Sep 2015 Opticis Locations Headquarters Opticis Co Ltd 16Fl Kins Tower 8 Sungnam daero 331 beon gil Bundang gu Seongnam si Gyunggi do 463 844 South Korea Te l 82 31 719 8033 Fax 82 31 719 8032 www opticis com For order support please contact your Distributor or Reseller For technical support check with the Opticis web site www opticis com or contact techsupp opticis com
5. non sterile reusable device not intended for use in the sterile field and intended for use by qualified physicians having complete knowledge of these surgical procedures Contraindications There are no known contraindications for this device Package Content Package Content Part Number 1 Wall Plate for Near Source Converter Box WPC MVDF 1 6 Indications Contraindications Package Content Device Features A list of the MVDF parts and their functions is provided below Front panel 1 4 input signal ports DVI VGA Composite and S Video input ports with mechanical locking structure 2 Video Input Status LED Indicates current input status Shines Yellow if the input signal is connected Yellow is turned off if the input signal is disconnected 3 Power LED Indicates current status Shines green if the converter is powered on Green is turned off if the power is disconnected 4 Mini USB Port To maximize compatibility with various input sources having customized or unique output resolutions easy firmware update can be done via front mini USB port Back panel 5 Optical video output port Transmits optical DVI signal Please remove dust cover to connect to multi mode SC terminated fiber 6 Power connector cover Cover of power connector It should be removed when user connect power supplying cable 1 7 Device Features Basic Connection Setup Please follow the step as below Power
6. ns not expressly approved by the party responsible for compliance could be void the user s authority to operate the device 1 Gang sized Multi format video to Optical DVI Converter Place and fix device on the places where the easy plug and unplug of power MVDF supply can be done To stop the operation of device immediately and safely just unplug the power supply from the device 1 4 About your device 1 3 Cautions y Intended Use This video signal converter is equipment that converts DVI VGA Composite and S Video signals which received from various medical devices into optical DVI to relay it to the other devices or displays Installation Guidance This wall mounting type converter is installed in US standard gang metal enclosure preinstalled in boom equipment or wall After insert this converter into the gang tighten two screws to assemble with it as shown below Installation Condition Make sure this converter is required to install in cement wall or boom equipment with preinstalled US standard gang metal enclosure and internal combustion material preventing any damage or danger from internal fire After installation and assembly internal of this wall mounting type converter cannot be touched or modified 1 5 Intended Use Installation Guidance Installation Condition Indications This device is indicated for general surgery for surgical procedures for example Endoscopy etc This converter is
7. pTICIS www opticis com 1Gang sized Multi format video to Optical DVI converter MVDF MVDF User s Manual Manual Contents Warnings and Cautions Warnings Cautions About Your Device Intended Use Indications Contraindications Package Content Device Features Setup Basic Video Setup Technical Specifications 1 0 Manual Contents Warnings and Cautions Please read this manual and follow its instructions carefully The words warning caution and note carry special meanings and should be carefully reviewed Warning The personal safety of the patient may be involved Disregarding this information could result in personal injury Caution Special service procedures or precautions must be followed to avoid damaging the device The warranty will be void if any of the following warnings or cautions are disregarded 1 1 Warnings and Cautions Warnings To avoid a potential serious injury to the user and the patient and or damage to this device please note the following warnings Read this manual thoroughly and be familiar with its contents prior to using this device Carefully unpack the device and check if any damage occurred during transport This device is non sterile and therefore should not be placed in the sterile field Do not place the device or any other heavy object on the power connector Damage to the connector can cause fire or electric shock Do not place the device or any other heavy objec
8. posite video input Self EDID for DVI and VGA 500m 1 640feet WUXGA 60Hz 8 15V lt 0 5W The MVDF provides auto source detection First in first out and video output priority when 4 video input signals are connected at the same time It gives priority at DVI VGA S Video and Composite video Power Green Video input status Yellow US standard 1 gang size PCB 68 x 85mm 0 50C 1 9 Technical Specification Remark Front panel Back panel Front panel Warranty Information 1 One Year Warranty Opticis warrants this MVDF to be free from defects in workmanship and mater ials under normal use and service for a period of one 1 year from the date of purchase from Opticis or its authorized resellers lf a product does not work as warranted during the applicable warranty period Opticis shall at its option and expense repair the defective product or part d eliver to customer an equivalent product or part to replace the defective item or refund to customer the purchase price paid for the defective product All products that are replaced will become the property of Opticis Replacement products may be new or reconditioned Any replaced or repaired product or part has a ninety 90 day warranty or the reminder of the initial warranty period whichever is longer Opticis shall not be responsible for any software firmware information or me mory data of customer contained in stored on
9. t on the power cord Damage to the cable can cause fire or electric shock This device should not be used adjacent to or stacked with other devices lf adjacent or stacked use is necessary the device should be observed to verify normal operation in the configuration in which it will be used Test this device prior to a surgical procedure This device was fully tested at the factory before shipment Do not attempt self repairs or adjustments not specifically detailed in this manual Ensure that readjustments modifications and or repairs are carried out by persons authorized by Opticis Do not put any liquid or solid object into the device If this occurs unplug the device and have it checked by qualified personnel before operating it any further Use appropriate caution to prevent contact with fluids if the device is being used with a power supply in patient environments The use of cables and or other accessories with this device other than those specified may result in increased emissions or decreased immunity of this device 1 2 Warnings Cautions About Your Device Connect the device to the AC adapter connected to a medical grade power cord This 1 Gang sized Multi format Wall Plate Converter MVDF receives DVI VGA ensuring the power cord is plugged into a grounded power outlet to achieve Composite and S Video into optical DVI signal and transmits it up to 500m OM2 grounding reliability 1 640ft over one 1 multi mode fiber 5
Download Pdf Manuals
Related Search