RifeMedic 235C Software Installation This is the blue RifeMedic
Contents
1. RifeMedic is switched on Run the software and set up the Comms Port as 1 and Enable the port The dark green Port led should become light green When it communicates with the RifeMedic the top centre dark green led will also become light green Follow the detailed software instructions in the User Manual 5 If you do not have a serial port you have to buy a gadget called a USB to Serial Converter It should cost R 100 to R 200 This gadget will have install software Make sure the software 1s compatible with your computer s Windows for example Windows 7 Install the gadget on your computer Follow the gadget install instructions With no instructions try plug the device into the computer Windows will start a driver search install procedure Allow windows to look onto the install software CD for the driver Once the gadget is installed plug it in onto a USB port and listen for the computer s ding dong sound response indicating it works An info bubble may also appear on the right bottom screen saying the device is functioning correctly Now that the gadget 1s connected to the computer and you know it works do the following procedure only once After this windows should remember the set up If you are unable to do this please ask someone with this absolutely basic computer required knowledge to support you A Start the control panel choose system choose device manager and hardware profiles This depen2. RifeMedic 235C Software Installation This is the blue RifeMedic referred to as RifeMedic 3 1 The software runs on all Windows versions XP Vista 7 The RifeMedic software needs a Password when you install it This is on the software CD in the Password txt file 2 The RifeMedic 235C works with a RS 232 signal connected to a computer This is if you want the computer to control the RifeMedic The cable is a 9 way flat ribbon cable with DB 9 Female connectors on both ends The one 1 connects to the RifeMedic and the other connects to the computer If your _ computer does not have a RS 232 port then you will have to install a USB to Serial converter See the text below point 5 for instructions Giana nihai Caasentar i EAE m a 3 When the RifeMedic is switched on ready to be programmed if you then press the C Cancel button 2 numbers appear on the display The first number is the RifeMedic Port Number and the second number is the Hours the RifeMedic has worked The Port Number should be 001 If this is any other number change it to 001 Press and hold the M button and press Up to increment or Down to decrement the Port Number Release the keys when the number is 001 Now the RifeMedic side is ready 4 When you use a Desktop computer with a RS 232 port DB 9 Male connector Connect the flat ribbon cable to the computer The other end of the cable is already connected to the RifeMedic and the
3. ds on the Windows version B Select and open Ports Look for the USB to Serial gadget driver and right click on it Select properties select port settings select advanced Change the Com Port Number to 3 Port 1 and 2 may be used by other devices If Windows reports that port 3 is used by another device tell it to accept continue Quit the control panel C Connect the flat ribbon cable to the computer The other end of the cable is already connected to the RifeMedic and the RifeMedic is switched on Run the software and set up the Comms Port as 3 and Enable the port The dark green Port led should become light green When it communicates with the RifeMedic the top centre dark green led will also become light green Follow the detailed software instructions in the User Manual
Download Pdf Manuals
Related Search