NOVA Swing Away Accessory™ Instruction Manual
Contents
1. DO NOT place your tailstock on the joint surface when you are swinging your bed extension away Fail to do this could cause mis alignment of your tailstock 10 Your swing away attachment is fully aligned now and is ready for use Fig 4 Attaching part 9009 to Fig 5 SwingAway Unit ready bed View from underneath to use Safety Instructions Nova Swing Away Accessory is designed to use with DVRXP NOVA 1624 Lathe beds ONLY Please ensure 6 When the DVRXP Nova extension 1624 lathe bed is headstock is Swinging attached to the please main bed when operate using Nova slowly Swing Away and Unit gently 2 Please ensure all 7 Please do 8 screws used not place are NOVA high tensile M12 cap screws provided fingers at with the package Fig 6 Use with DVRXP see spots when 3 DO NOT use any 1624 lathe and Headstock swinging to Fig 8 do not place fingers at other screws to avoid danger spots fasten the unit fasten with custom made screws possible are strictly prohibited damage 4 Please avoid leaning on extension 30kg MAX bed and DO NOT exceed design load 30kg on the TA extension bed Please keep the area under extension Fig 9 Be careful of sharp bed clear edges on the unit Tailstock 13kg toolslide 7kg E Fig 7 Do not exceed design remove all load 30ka k q th ifi extra items oa eep undernea Specifications from the area clear extension Dimensions closed 210 x 12. bed as this will be used in the alignment procedure of the swing away attachment Remove the extension bed on the lathe by undoing the four cap screws and spring washers These four cap screws and spring washers will be reused to join the extension bed to one end of the swing away attachment If you are adding onto another purchased extension bed then four cap screws and spring washers will be included with the oo extension bed Fig 2 Part 9008 with Counter Attach part no 9008 to the bed attached to the lathe You Bore Holes should have the counter bore holes facing you as shown in Fig 2 Attach four M12 cap screws and nip them up Do not fully tighten at this point Bring the tailstock over the join surface between the main bed and 9008 which has just been attached fig 3 Clamp the tailstock firmly and then with the help of the Allen key provided fully fasten the four cap screws Move the tailstock away again onto the main bed Now bring the extension to the other bracket part 9009 and attach the four cap screws and spring washers that were just removed from the main bed and extension assembly These four cap screws and spring washers will need to be attached from Fig 3 Aligning part 9008 to the inside of the extension bed bed with Tailstock Repeat steps from 4 onwards Check that the tailstock can move freely over the complete join surface between main bed and extension bed through the swing away attachment
3. 20 x 86 mm bed when Weight with screws 5 5 kg swinging Caution Material main body QT450 10 High Tensile SGI apart from Max Swinging Angle 180 degree Noya Nova Tailstock 13kg Maximum Net load on extension bed kg 30kg alsockand Nova Toolslide 7kg Raitt 4 x M12 high tensile Allen Head Cap toolslide
4. INTERNATIONAL SSSss CSO aaa NOVA Swing Away Accessory instruction Manual Nova Swing Away Tailstock Perfect for Bowl Users Quickly Swing Away Tailstock Space Saving Swing Away extra Bed Extensions when not needed Fast and easy to use Incredible added versatility to your NOVA lathe READ THIS MANUAL CAREFULLY AND BECOME THOROUGHLY FAMILIAR WITH OPERATIONS BEFORE USE Publication No 98 0804 007 Last updated June 2008 PART NO 9007 Designed for Nova DVR amp Nova 1624 with trapezoidal bed sections Part Lists M16 Flast 6 9010 HingePin 1 Swing Latch o Bee eae C Screw M12 bolt 9 AK0 AllenKey10mm 1 5 0 Product Assembly The newly designed NOVA Swing Away Accessory provides professional wood turners with another powerful option of attaching their extension bed The new NOVA Swing Away Accessory with high tensile SGI cast body is manufactured with modern CNC machining centres to give the product not only extreme strength but also the greatest precision on the market Designed using 3D CAD and Finite Element Analysis software the NOVA Swing Away Accessory is strong lightweight and cost efficient Fig 1 Unit ready for alignment 9 Assembly amp Alignment Due to heavy cast iron parts being handled we strongly recommended that this assembly operation be carried out by two people Please follow step by step instructions below Move the tailstock onto the main
Download Pdf Manuals
Related Search