Digital High DefinitionSatelliteand Terrestrial Receiver SRT 8345 CI
Contents
1. Use YELLOW button to display detailed program information Use BLUE button to programme timer for selected program In program details Use A W to scroll information in the window Use EXIT to return to the list of programs 6 2 Zapping and information banners Zapping banner displayed automatically every time when you change channel in normal view mode It provides information about current channel list type carrier name time and date information channel number and name as well as current program name Information banner can be displayed by pressing to INFO button In addition to zapping banner it provides information about next program availability of subtitles and teletext on current channel Information banner can be toggled to Extended and Signal modes by pressing RED Extended and GREEN Signal buttons accordingly In Extended mode can be displayed short description of current program if available In Signal mode displayed technical information such as transponder parameters audio and video PIDs of current channel signal strength and quality 6 3 Channel list and view mode To call up on screen the current channel list press OK button from view mode Use AW 4P buttons to select channel and press OK to switch to full screen view mode Use button SAT to call up the list of terrestrial channels 6 3 1 Fast alphabet filtering Press RED Filter button to filter channels in alphabetical order The alphabet will be displayed at2. Contrast Saturation then press OK button to confirm selection 5 4 3 Time Setting To synchronise time in your receiver with broadcaster set GMT usage to ON select your time zone and set Summer time accordingly to season In some cases it is recommended to set GMT usage to OFF and setup date time manually 5 4 4 Parental Control In this menu you can set menu lock status Disabled or Enabled and change the PIN code Parental rate menu allows you to block watching content which is rated for age equal or higher then you have set in this menu Function of this feature depends from broadcast and STRONG would not take any responsibility if it doesn t work The default PIN code is 0000 5 4 5 Software update Select this option in order to update your receiver with the latest software version Software update services are available from Astra at 19 2E and Hotbird at 13E satellites If your antenna is primed to Astra 19 2 E then enter following parameters Frequency 12604 Polarity H Horizontal Symbol rate 22000 If your antenna is primed to Hotbird 13E then enter following parameters Frequency 12476 Polarity H Horizontal Symbol rate 27500 Press RED Search The receiver will check availability of software update and propose to update software if new version is available Follow future instructions displayed on screen After software update process receiver will switch on a last watched channel automatically Note During so
3. STRONG DIGITAL STRONG conn iLILI f UL Digital High Definition Satellite and Terrestrial Receiver SRT 8345 Cl User Manual i PART 1 English STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INTRODUCTION 2 1 1 Safety Instructions 2 1 2 Storage 3 1 3 Equipment Set up 3 1 4 Features amp Accessories 4 2 0 YOUR RECEIVER 5 2 1 Front Panel 5 2 2 Rear Panel 6 2 3 Remote Control Unit 7 3 0 CONNECTIONS 9 3 1 Connecting to a Satellite Dish 9 3 2 Connecting to Terrestrial antenna 10 3 3 Connecting to TV amp VCR 10 3 4 Download new software 11 3 5 Connecting to external USB Hard disk ll 4 0 STARTING UP FOR THE FIRST TIME 11 4 1 Language Selection 12 4 2 Select Satellite 12 4 3 Dish adjustment 12 4 4 Channel set up 12 4 5 Digital Terrestrial TV installation 12 5 0 MAIN MENU 13 5 1 Channel Organizer 13 5 2 Satellite Search 15 5 3 Terrestrial Search 19 5 4 Installation 19 5 5 Timer 22 5 6 Application 22 5 7 Common Interface 23 6 0 OTHER OPERATIONS 24 6 1 Program Guide EPG 24 6 2 Zapping and information banners 24 6 3 Channel list and view mode 24 6 4 PDR functions 25 A 1 TROUBLESHOOTING 27 A 2 SPECIFICATIONS 27 LU E 0180 500 75 43 Z 0 14 Min from German wired line 0820 400 150 0 12 Min from Austrian wired line O E 0826 029 928 SE 0 14 Min from French wired line per June 2008 www strong tv l STRONG PART 1 o English DIGITAL TV 1 0 INTRODUCTION 1 1 Safet
4. Use lt P buttons to select polarisation of transponder Symbol rate Network search Search for Use Numeric buttons to enter symbol rate value Use lt P buttons to select ON or OFF Use lt P buttons to select type of channels to be installed Press RED Search To setup single channel from specific transponder To use this function you need to know special values that identify single channel For this reason you may need to consult to special magazines or internet It is necessary to setup all parameters of transponder as described in above Press GREEN PID add button Satellite Frequency Service ID Video PID Audio PID CAS m HDVideo m AC3 Audio indicate name of the satellite where channels will be searched indicate frequency of transponder where you install channel Use Numeric buttons to enter value in decimal Use Numeric buttons to enter value in decimal Use Numeric buttons to enter value in decimal Use lt P buttons to select ON or OFF Set to ON if channel is encrypted otherwise keep OFF Use lt P buttons to select ON or OFF Set to ON if channel is HD otherwise keep OFF Use lt P buttons to select ON or OFF Set to ON if channel has AC3 audio and you are going to use AC3 audio otherwise keep OFF 16 www strong tv PART 1 English STRONG DIGITAL TV To add channel press YELLOW Save or BLUE Save amp QExit button The new channel will be added to the list with name Video CH XXX
5. UHF 470 to 862 MHz 78 5 25 dBm 64 QAM Code Rate 2 3 Guard Interval 1 8 Gaussian Channel COFDM 2K 8K Carrier 5 Volt DC Max 50mA overload protected CPU STi7100 Flash Memory 8 MBytes System Memory 64 MBytes A V Memory 64 MBytes 28 www strong tv PART 1 o English STRONG DIGITAL TV Connectors ANT IN TO TV SAT IN SAT OUT TV SCART RGB CVBS Audio L R Output with Volume control VCR Scart Input RGB CVBS Audio L R Output CVBS Audio L R HDMI V A Output Type A Version 1 0 RCA Output Audio L R amp Video Output Component Video Out Y Pb Pr S PDIF Dolby Digital Out Coaxial Optical Data Interface serial port RS 232 9 Pin D Sub Male type USB 2 0 Type A Connector General Data Input Voltage Range 90 250 V AC 50 60 Hz Power Consumption max 40 W Operating Temperature 0 40 C Storage Temperature 10 50 C Operating Humidity Range 10 85 RH Non condensing Size W x Dx H in mm 300 x 215 x 65 Weight 1 6 kg Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change CryptoWorks and Irdeto are trademarks of Irdeto Access B V Conax is a trademark of Telenor Conax AS Viaccess is a trademark of France Telecom all other product names are trademarks or registered trademarks of their respective owners STRONG 2008 All rights reserved 12 2008 www strong tv
6. can edit satellite s name angle location and transponder as well as add new satellite Press RED button to edit a satellite s properties Press GREEN to add new satellite Edit existing satellite and add new satellite functions are identical m Name press OK button to edit name of the satellite On screen will appear keyboard To delete current name select Backspace GREEN Buttons and press OK To enter new name use lt P and OK buttons Press YELLOW button to save new name or press BLUE button to EXIT m Angle Use Numeric buttons to enter value of orbital position of the satellite m Location Use lt P buttons to select East or West location of the satellite Transponder table press OK button to enter to edit transponder table menu In this menu use RED button to edit parameters of selected transponder GREEN button to add new transponder or YELLOW to delete selected transponder To save changes you have made press YELLOW Save or BLUE Save amp Exit button 5 2 4 GOTO X set up In this menu you should set your geographical location if you use positioner and it supports GOTO X Use AY buttons to navigate in the menu Use Numeric buttons to enter values Use lt P buttons to select an option To save changes you have made press YELLOW Save or BLUE SaveQExit button 18 www strong tv PART 1 English STRONG DIGITAL TV 5 3 Terrestrial Search The Terrestrial Search menu contains following sub menus Channel se
7. order of the channels in another list l e sorting of the channels in 1 Favourite list do not change order of the channels in list of all channels and vice versa Note Please note that channel sort function is not available if the setting for Channel 7 numbering Menu Terrestrial Search Terrestrial Settings is set to Operator defined Sort RED button Press RED button to select one of available sort options m Original Order the order of the channels will be restored to last stored order m Alphabet A Z or Z A channels will be sorted in alphabet order www strong tv 13 STRONG PART 1 o English DIGITAL TV m Frequency Low High channels will be sorted in frequency order first channels with low frequency then with higher frequency m First FTA Free To Air channels will be placed at the beginning of the list Scrambled channels at the end m First scrambled Scrambled channels will be placed at the beginning of the list Free To Air channels at the end If you want to store new order of channels press YELLOW Save or BLUE Save amp Exit button If you do not want to store result of sorting press EXIT button Message Do you want to save will appear on screen Select NO to cancel or press OK to save result of channel sort Move GREEN button Press GREEN Move button to manual sort channels Use A W buttons to select channel that you want to move Press OK button to confirm channel selection Y
8. 29 STRONG PART 1 o English DIGITAL TV 30 www strong tv
9. ED Auto scan button on remote control to start channel search If you use dish mounted on DiSEqC 1 2 or GOTO X positioner then select Dish position item and press OK If you use GOTO X positioner then GOTO X setup menu will be displayed Please refer to GOTO X setup description in chapter 5 2 4 After setting up dish position press RED Auto scan button on remote control to start channel search 4 5 Digital Terrestrial TV installation After Satellite scan is completed you will be asked to continue installation with Digital Terrestrial TV If you do not want to install Digital Terrestrial TV at this time select No and press OK You can setup Digital Terrestrial TV later through Terrestrial search menu If you wish to install Digital Terrestrial TV select Yes and press OK 12 www strong tv PART 1 English STRONG DIGITAL TV Select your Country Antenna Power mode and Channel Numbering Use A W buttons to select an item and lt P buttons to change the value of the item To continue installation press BLUE SaveQExit button On the next step of installation wizard you can adjust your terrestrial antenna for best reception condition Please use lt P buttons select channel number where digital terrestrial signal is available and adjust your antenna direction and position If necessary to get maximum levels on the signal level and quality indicators You can check with your dealer on which channels digital t
10. MI or YPbPr connector to your TV set 3 4 Download new software This receiver can download new system software by OTA update from satellite and is also able to load new software via USB from external storage device or PC Therefore software updates via RS 232 port is only a stopgap To upload new software connect the receiver with an USB cable to an external storage device Instructions how to download software can be found on our website www strong tv support gt download 3 5 Connecting to external USB Hard disk Switch on your external HDD connect the power adapter if applicable before you connect the USB connector at the back of your receiver After finishing the First Installation Cap 4 0 proceed with following steps 1 Unless the USB Hard disk is already formatted in FAT32 and recognised successfully for the first time you will get a message to format your device to FAT32 in Application gt USB menu 2 In this menu press the YELLOW Format button on your remote control to confirm After 10 to 20 sec depends on HDD size formatting will be finished and you can leave the menu with the MENU or EXIT button 3 Go to Application gt PDR menu to adjust the preferred recording duration and set Timeshift to OFF or ON as desired A IMPORTANT During formatting all data on the hard disk will be deleted and get permanently lost STRONG cannot be granted for any loss or damage of data if you format the hard
11. REEN when USB device is connected to USB connector at the back of the receiver 8 4 digits indicator In awake mode displays channel number In stand by mode displays current time 9 Front panel flap 9a 2 Common Interface slots 9b Smart card reader for Conax smart card www strong tv j STRONG PART 1 English DIGITAL TV 2 2 Rear Panel 90 250 V 50 H2 60 Hz Max 40 W ca bl Rots CE S PDIF Ai Supplied by STRONG amp Co Japan Fig 2 1 ANTIN To connect the antenna cable to this connector 2 TOTV Gives you the possibility to connect an extra terrestrial receiver 3 SATIN To connect the coaxial cable from your LNB on the satellite dish to this connector 4 SAT OUT Gives you the possibility to connect an extra satellite receiver analogue or digital 5 TV SCART Connector Use this connector to connect your receiver with your TV set using a SCART cable 6 DVD VCR SCART Use this connector to connect your receiver to your video recorder using a SCART cable When receiver in stand by mode a video audio signals from your VCR will be looped through receiver to your TV set 7 Y Pb Pr Connects to Component jack of TV 8 VIDEO This connector has a constant video signal for additional VCR connections 9 Audio L R Outputs for Audio Left White and Right Red 10 SPDIF Coax and Optical Output for connecting to a digital audio amplifier 11 HDMI Connects to HDMI jack o
12. TRONG Manual setup of channels PART 1 English DIGITAL TV Network search Search for ifthis item is set to No then receiver will search for the channels that are available from preset transponder list of selected satellite Ifthis item is set to Yes then receiver in addition will search for the channels from transponders information about that can be found from broadcast Use this option to get new channels that appeared on satellite you can select type of the channels that will be installed to your receiver If selected All channels then receiver will install Free To Air and Scrambled channels If selected Scrambled then receiver will install only Scrambled channels If selected FTA then receiver will install only Free To Air channels Once you complete all settings you can start channel search process Press RED button to install channels from all transponders of the satellite Press GREEN button to install channels from transponder selected in Transponder item Press YELLOW button to enter to Manual setup channels from specific transponder or to setup single channel with known Video and Audio PID In Manual channel search menu you can setup all channels from specific transponder or single channel To setup all channels from specific transponder Satellite Frequency indicate name of the satellite where channels will be searched Use Numeric buttons to enter frequency of transponder Polarisation control
13. Type and press OK button to confirm selection Tip If you have changed TV type and Video on screen not appears in 15 seconds press i EXIT button 2 times Such a problem can appear if your TV do not supports video in NTSC format m Aspect Ratio Set accordingly to aspect ratio of your TV Use A V lt P buttons to select the item and press OK button to display the list of options use AY buttons to select Aspect Ratio then press OK button to confirm selection m Screen Control Use AW lt P buttons to select the item and press OK button to display the list of options use AY buttons to select Aspect Conversion then press OK button to confirm selection m RGB YUV Selects a mode of video output signal Ifyou have connected your TV to receiver only by SCART cable then it is recommended to set RGB mode If you have connected your TV to receiver by HDMI or Component cable then this value must be set to YUV Use AW lt P buttons to select the item and press OK button to display the list of options use AY buttons to select YUV or RGB mode then press OK button to confirm selection A WARNING If you have selected RGB mode then HDMI digital and YPbPr component outputs on the receiver would be disabled 20 www strong tv PART 1 English STRONG DIGITAL TV m Brightness Contrast Saturation Use A V lt P buttons to select the item and press OK button to display the list of options use A W buttons to select level of Brightness
14. X where XXXX is equal to PCR PID Video you have entered 5 2 1 1 Positioner setup If in Dish setup menu you have configured Dish mode as DiSEqC 1 2 then you have to setup position of the dish to each satellite that you want to install In Channel setup menu move menu focus to Dish position item and press OK button on remote control Menu Positioner setup will appear on screen m Satellite Displays the name of satellite position of antenna for which you setup m Transponder Use lt P buttons to select reference transponder receivable in your location to measure signal strength and quality m Movement speed Use lt P buttons to select between Slow and Fast Slow speed allows you to fine adjust position of the dish each press to direction button will turn dish to short angle Fast speed can be used to adjust dish position roughly If Movement speed set to Fast press to direction button will couse continuous movement of the dish to appropriated direction to stop dish you will have to press OK button m Move Use lt P buttons to move dish to the East West direction m Centre position If you press OK button while menu focus is on this item then dish will be turned to centre position which corresponds to true South direction m Limits Use lt P buttons to Enable or Disable software limits of your positioner m Set limit Use lt P buttons to select East or West limit of dish movement range Step by step recommendations of p
15. by a qualified technician 4 The product has been dropped or damaged in any way 5 The product exhibits distinct change in performance Replacement Parts When replacement parts are required mare sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equ
16. d dish would not hit any objects on its movement www strong tv 17 STRONG PART 1 English DIGITAL TV 5 2 2 Dish set up In this menu you can setup parameters of your dish es m Dish number Use lt P buttons to select number of the dish This number used in Channel setup menu to create a link between satellite and corresponded dish configuration m LNB type Use lt P gt buttons to select type of LNB If you set type to Universal then you should enter values of Local Oscillator Frequencies in LO frequencies menu item m LO frequencies this menu item selectable only in case LNB type is Universal Press OK button and using Numeric buttons enter values in appeared dialog box Band control Use lt P buttons to select value Set to Auto in order receiver automatically select Band by sending 22 kHz control signal Set to ON in order receiver generate 22 kHz control signal continuously or set to OFF in order to disable 22 kHz control signal m Polarisation control Use lt P buttons to select value Set to Auto in order receiver automatically control polarisation Set to 13 V or 18 V in order receiver supply LNB with selected power or set to OFF in order to disable LNB power m Switch type if you use DiSEqC switch the select appropriated type m Switch input select input number to which LNB is connected m Dish mode Use gt buttons to select between Fixed DiSEqC 1 2 and GOTO X 5 2 3 Edit satellites In this menu you
17. disk 4 0 STARTING UP FOR THE FIRST TIME Ensure that your receiver is correctly connected to your television satellite and terrestrial antennas Make sure that satellite and terrestrial signals are of good quality Ask your local Strong dealer to check your installation or satellite signal if you are not sure how to do this Confirm that the power plug of receiver is plugged into the wall outlet Turn on the receiver by power switch on rear panel The language section menu will be showing on your TV Screen It is recommended that you do first time installation following Installation Wizard step by step It will help you easily achieve system configuration and channel installation If you are advanced user then you can skip wizard by pressing EXIT button and set up channels using Installation menu www strong tv 11 STRONG PART 1 English DIGITAL TV 4 1 Language Selection Press OK to choose the language 4 2 Select Satellite The Installation Wizard preconfigured for easy installation of Astra 1C 1E 19E or HOT BIRD 13E For these satellites LNB configuration is predefined as Universal LNB connected to the receiver via DiSEqC 1 0 switch input 1 If your dish is aimed to Astra 1C 1E 19E or HOT BIRD 13E then select corresponded satellite from the list future steps of installation are described in 4 3 If your dish is aimed to another satellite or you have multiple dish installation then select other future steps of
18. eiver Fig 3 Make your choice of which satellite you want to receive your signals from and have your dealer aim your dish at the requested satellite Connect a coax cable to your LNB and the other end directly to the SAT IN connector of your receiver Connecting multiple fixed dishes to your receiver using a DiSEqC 1 0 switch If you want to watch programs from more than one satellite For example from Astra and from HOT BIRD it is advisable to use fixed dishes and a DiSEqC 1 0 switch Have your Dealer aim the dishes at the requested satellites and connect the LNB with coax cables to the IN connectors of the DiSEqC 1 0 switch Connect the OUT connector of the DiSEqC 1 0 switch to the SAT IN connector at the back of your receiver Connecting a dish on a motorized positioner to your receiver Another possibility for watching programs from multiple satellites is by mounting a dish to a motorized DiSEqC 1 2 positioner Have your dealer mount the dish to the positioner set the correct angle of the elevation and let him set the center point for your positioner Connect the LNB with a coax cable to the LNB IN connector of the positioner and connect the OUT connector of the positioner to the SAT IN connector at the back of your receiver www strong tv 2 STRONG PART 1 English DIGITAL TV 3 2 Connecting to Terrestrial antenna To receive the broadcast signal the terrestrial antenna cable should be connected to the ANT IN connector a
19. eletext via receiver multi lingual subtitling and audio track support Parental lock function with rating control Quick and easy installation amp user friendly menu Multi lingual support on screen menu OSD USB 2 0 for USB storage devices Selectable output for 1080i 720P and 576P format Aspect ratio adjustment 4 3 16 9 Pan amp Scan Letterbox Software Update via USB 2 0 port and RS 232 Digital sound through optical and coaxial output S PDIF Fully DVB compliant supports MPEG 2 MPEG 4 and H 264 Multiple Video Outputs HDMI Component Y pb pr SCART RGB CVBS Video RCA Accessories m 1x User Manual m 1x Remote control unit m 2x Batteries AAA type Note The batteries should not be recharged disassembled electrically short circuited or be 7 mixed or used with other types of batteries 4 www strong tv PART 1 o English STRONG DIGITAL TV 2 0 YOUR RECEIVER 2 1 Front Panel 5000 POWER mpu dk crv cHa vora voL gt i Definition Satpllite and Terrestrial Receiver High Definition 4 123 4 5 67 8 9 Fig 1 1 POWER Switches the receiver power On and Standby 2 MENU Gets into Main Page screen 3 OK Executes the selected item 4 CH Up Down Channel up down or selects the item of Menu 5 VOL Up Down Volume up down or selects the item of Menu 6 Stand by LED Light up RED when receiver is in stand by mode Off when receiver is in awake mode 7 USB LED Light up G
20. errestrial broadcast is available at your location Press BLUE Next button to continue to Digital Terrestrial TV scan once you are sure that signal level and quality are the best from possible At the end of installation process the receiver will exits from installation menu and tune to the first channel in the list Enjoy your TV and Radio channels TIP If your home country broadcaster supports LCN Logical Channel Numbering then please 7 adjust channel numbering mode to Operator defined if you are not sure about this ask your local STRONG dealer If the LCN is not supported then please select Appearing order 5 0 MAIN MENU All the important settings and features of your receiver can be operated in Main Menu The Main Menu consists of seven sub menus Channel Organiser Satellite Search Terrestrial Search Installation Timer Application and Common Interface Press the MENU button when the menu is off the MAIN MENU screen will appear 5 1 Channel Organizer In MAIN MENU screen use A W buttons to select Channel Organiser then press OK or P to enter the Channel Organiser menu which consists of the sub menus Sort Channels Add to Favourites and Edit Channels 5 1 1 Sort Channels In this menu you can sort channels by order or move channels to specified position Note Channels are sorted in the selected channel list only Sorting of the channels in one list 7 do not change
21. f TV 12 RS 232 Serial Port This serial port can be used to connect your PC to your receiver to download new software versions to your receiver 13 USB Connects to USB device 14 Power ON OFF Switch Powers on off 6 www strong tv PART 1 English STRONG DIGITAL TV 15 Power Cord Your receiver requires a current of 90 240 V AC Auto selectable 50 60 Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet 2 3 Remote Control Unit 1 MUTE Enables or disables the audio 2 POWER Switches the receiver between operation and standby mode 3 RCL CT 6 Selects the previously viewed channel 4 HDMI Changes the resolutions of video Switch HD type 5 TV RADIO Switches between TV and Radio 9 6 AV TV Selects the TV VCR STB receiver output or AUTO 11 Automatic mode for the TV SCART output 13 7 Numeric buttons Select the TV or Radio service channels and individual menu 8 FAV Toggles the selected favorite mode 15 9 SAT 17 Displays the Channel list of Terrestrial 10 EPG Displays the TV or Radio program guide Electronic Program Guide 20 11 Teletext 22 Enables teletext mode 24 12 Audio a Changes the audio languages 13 Subtitle Enables subtitle mode 14 CH lt gt Changes channels or moves to the item in the menu 15 VOLAY Adjust the volume or moves to left or move item in the menu 16 MENU Displays the main menu o
22. ftware download process Progress of software download will be displayed on screen Note Availability of the software update is subject of local broadcast condition and may not work in all countries Contact your vendor to find out more about this function Warning Do not switch power off and do not disconnect the receiver from the dish during update process 5 4 6 System Information Displays the information about software version installed in the receiver 5 4 7 Factory Reset Use Factory Reset only when you want to return the receiver to the condition of factory default This will delete all user settings and installed channels www strong tv 21 STRONG PART 1 o English DIGITAL TV 5 5 Timer You can set the timer to make the receiver perform designated actions including timer based wake up or sleep instructions to the receiver m Timer Index Use the lt P buttons to select m Active Use lt P buttons to select among Power on Power off Duration Recording and OFF disable timer m Mode You can set the cycle of the action designated in the timer mode Once Daily or Weekly m Channel Type Press OK button to display current channel list and using navigation buttons select channel to be shown when the receiver will power on by timer event You can use TV R button to select between TV and Radio channels m Starting Time You can set the starting date or days of the week for the timer action Use Numeric buttons to enter
23. installation are described in 4 4 4 3 Dish adjustment After selection of AstralC 1E 19E or HOT BIRD 13E menu WIZARD DISH ADJUSTMENT will appear Adjust your dish position in small steps until the signal strength and quality bars turn green or yellow Try to reach the maximum possible strength and quality level Once you are sure the signal cannot be improved fix the dish on this position and press OK on your remote control to start the channel search After finished search the first programmed channel will be displayed on screen TIP Depending from OSD language and satellite selected you may be prompted to select preinstalled channel list These channel lists include most popular channels ordered according to the preference of most of the customers 4 4 Channel set up If you select Other satellite then menu Channel set up will be displayed on screen Using A W buttons select the Satellite item and press OK to display list of satellites Use A W buttons to select satellite of your choice and press OK Using A amp W buttons select Dish number item and using lt P buttons select dish number and transponder network search and channels which you want among All channels FTA and Scrambled in search for menu Press OK in Dish number mode to set up Dish menu In Dish setup menu configure settings of the LNB DiSEqC switch and Antenna mode Please refer to chapter 5 2 2 Dish set up for detailed information If you use fixed dish then press R
24. ipment Otherwise please follow the instructions below Refer to the user manual of your TV and your antenna www strong tv STRONG PART 1 English DIGITAL TV Make sure that Audio Video cables and outdoor components are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates warning information TIPS Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold Character Move to Represents a menu item within a window Italic Character 1 4 Features amp Accessories m HDTV receiver for all digital Free To Air TV and Radio programmes via satellite and terrestrial antenna 2 Common Interface slots compatible to most popular Conditional Access Modules e g CryptoWorks Conax Viaccess Irdeto Mediaguard etc Exceptional bright and clear TV pictures and excellent sound in DVD quality High speed storage copy and loading function for channel list s and software from USB storage devices 5 000 channels memory capacity Austrian German Italian channels pre programmed Display showing channel number or time 4 Favourite lists for TV and Radio Zoom functions for TV pictures Electronic TV Programme Guide for present following event information 7 Timers with 3 modes daily weekly once T
25. l your modifications press EXIT Lock Lock function can be used in order to block access to some channels Press GREEN button to lock unlock channel of your choice Locked channel will be marked by Lock symbol In order to watch locked channel you will need to enter PIN code Channel will be locked in all channel lists 14 www strong tv PART 1 English STRONG DIGITAL TV Delete Pressing YELLOW button will mark selected channel to delete To unmark channel select it and press YELLOW button again Channel s will be deleted after you press BLUE button Be aware after pressing BLUE button channel s will be deleted from all channel lists To cancel delete operation you can press EXIT button Message Do you want to save will appear on screen Press EXIT to cancel or OK to confirm 5 2 Satellite Search The Satellite Search menu contains following sub menus Channel set up allows you to setup channels from selected satellites m Dish Set up allows you to setup configuration of your dishes m Edit satellites allows you to edit predefined satellites and their transponders as well as add new satellites GOTO X setup allows you to setup your location in order to use GOTO X type of positioner 5 2 1 Channel set up From this menu you can setup channels from satellite s in several modes access to Dish setup menu Positioner setup if used m Satellite Move focus of the menu to this item Press OK to display list of a
26. ll appear on screen 2 Select with the A W buttons the file you want to watch and start playback by pressing OK 3 You can activate Fast Forward or Fast Rewind during playback by pressing the or gt gt button Another pressing of these buttons will change the speed FF x2 x4 x8 FR x1 x2 x4 x8 Press Play button to continue playback at desired position 4 To choose a specific position or scene in the playback press INFO and select the desired position with the lt P buttons 5 To stop the playback press BI Stop button 6 4 3 Timeshift 1 Make sure that in PDR menu the Timeshift function is set to ON This can be adjusted in Application gt PDR menu 2 Press Il Pause button in TV mode to start Timeshift The Recording Info banner appears and shows the recorded time 3 To continue watching the programme press P Play button 4 Ifyou start Timeshift during recording the receiver keeps recording 5 You can activate Fast Forward or Fast Rewind during Timeshift by pressing the or gt gt buttons Another pressing of these buttons will change the speed FF x2 x4 x8 FR x1 x2 x4 x8 6 To choose a specific position or scene in Timeshift mode press INFO and choose the desired position with the lt P buttons 7 To leave Timeshift press W Stop button 26 www strong tv PART 1 English STRONG DIGITAL TV A 1 TROUBLESHOOTING There may be various reasons for the abnormal operatio
27. n of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact the dealer Don t open the receiver cover This may cause a dangerous situation and will void the warranty The 4 digits displayon The power cord is not plugged Check that the power cord is plugged front panel does not in in to the wall outlet Make sure power light up switch on rear panel is in ON position No picture or sound Wrong connection of the Audio Connect the Audio Video output of the Video output of the receiver receiver to TV correctly to TV Audio muting Press the MUTE button TV power off Turn TV on No picture The receiver can t receive Check the Terr Sat antenna cable the signal replace the cable or connect the cable to the receiver tightly Incorrect values of channel Set the values of TP or terr channel parameters parameters correctly in installation menu Wrong direction of the dish or Press TV Radio to get back to TV possible damage after storm channels Message Antenna Receiver detects shortcut in Disconnect receiver from the main Power Overload cable system check LNB antenna and appropriate cable then connect receiver again The remote control does The batteries ofthe remote Check whether the batteries are inserted not work control are not inserted or correctly in your remote control Check exhausted the batteries and if exhausted
28. n screen 17 EXIT Returns to the previous menu or normal viewing mode STRONG DIGITAL TV from a menu www strong tv 7 STRONG PART 1 o English 18 19 20 20 22 23 24 25 26 27 28 DIGITAL TV INFO Displays the program information box on the screen V V Turns volume up or down CH CH Changes channels up or down on normal mode 2 Moves up a page in the channel list Selects zoom In out y 7 Moves down a page in the channel list STOP Stops recording timeshift or playback PAUSE Timeshift deactivated Pauses the playing picture or go again to normal mode Timeshift activated Starts the function Further it is used to pause the playback RECORD Records the program PLAY Starts the playback assumed that recording s were already done Then you can select a file from the Recording File List REWIND Starts reverse playback and changes the speed of reverse playback F F Starts fast forward or fast motion playback and changes the speed of forward playback www strong tv PART 1 English STRONG DIGITAL TV 3 0 CONNECTIONS 3 1 Connecting to a Satellite Dish TELEVISION 000 90 250 V 50 Hz 60 Hz Max 40 W POWER A CAUTION ba fot A mex Rots Z CE Supplied by STRONG amp Co Japan is DIGITAL AUDIO AMPLIFIER sen Connecting a fixed satellite dish to your rec
29. ns to select language and OK to confirm To disable subtitles select OFF from the list of the languages 6 4 PDR functions The software supports full range of PDR functionality The usage is based on your own risk Recording of HD signals requires very high record speed Therefore the accurate function is depending on the used external USB device STRONG cannot guarantee for USB devices used Especially when Timeshift is activated at channels with high data rate STRONG cannot guarantee an accurate Playback of the Timeshift file Any risk of the PDR function usage shall not be passed to STRONG 6 4 1 Record 1 Select the desired TV channel you want to record Press the Record button on the remote control to start recording 2 Recording Info banner appears and shows the file name recording time and duration which can be adjusted in Application gt PDR menu It will disappear within OSD timeout interval To recall this banner during recording press the INFO button 3 During recording you can call up the Record Channel List by pressing the OK button to watch another Free To Air channel within the same transponder www strong tv 25 STRONG PART 1 o English DIGITAL TV 4 To stop recording at any time press Il Stop button 5 If you want to delete recorded file s from the Recording File List press the RED delete or GREEN All delete button 6 4 2 Play 1 Press Play button in TV mode and the Recording File List wi
30. om the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs 2 www strong tv PART 1 English STRONG DIGITAL TV Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions ad improper adjustment of other controls could damage the product and require extensive repair word
31. osition setup m Select reference transponder in order to check signal strength and quality during position setup m Ifyou do not know current direction of your dish then move menu focus to Centre position item and press OK Dish will be turned to true South Knowing your location longitude you may understand direction where necessary to move dish in order to reach position of selected satellite For example your longitude is 5 East and you want to setup dish position for Astra 1C 1E 19 East Then from centre position you need to move dish to East direction by pressing to lt button If your longitude is 25 East then in order to setup dish position for Astra 1C 1E 19 East you need to move dish in West direction from centre position by pressing to button m To setup roughly position of the dish set Movement speed to Fast Then move menu focus to Move item of the menu and by short presses to l or buttons move dish to necessary direction Check signal strength and quality indicators Once levels start increasing press OK button to stop the dish Set Movement speed to Slow and keep adjusting dish position until get best possible values m Once you are sure that dish is fine adjusted press YELLOW Store or BLUE Store amp Exit button Dish position for selected satellite will be stored NOTE in order to avoid mechanical damage of your dish please make sure those mechanical 7 limits in your motor are set correctly an
32. ou can select several channels to move them simultaneously Now you can select new position of the channel using A W buttons Press GREEN Move button to confirm new position of the channel Repeat these steps for all channels that you want to move To save new order of the channels press YELLOW Save or BLUE Save Exit button 5 1 2 Add to Favourites Enter to this menu in order to prepare lists of your favourite channels Use AY buttons to select channels of your choice Use lt P buttons to select favourite group where to add selected channel Press OK button to mark unmark channel to selected favourite group To rename Favourite group press RED button select group that you wish to rename and press OK On screen will appear keyboard To delete current name ofthe group select Backspace GREEN and press OK Select CAPS RED to toggle between Capital and small letters To enter new name use navigation and OK buttons To save new name press YELLOW Save or BLUE Save amp Exit button To cancel your modifications press EXIT 5 1 3 Edit Channels In this menu you can edit channel name lock and delete channels Edit Press RED button to edit name of the channel On screen will appear keyboard To delete current name select Backspace GREEN Button and press OK To enter new name use navigation and OK buttons To save new name press YELLOW Save or BLUE Save amp Exit button Channel name will be changed in all channel lists To cance
33. rency level and OK button to display the list m CAM messages To enable or disable displaying of messages from Conditional Access Module Disabling of CAM messages could be necessary in order to not disturb you while zapping through channels which can t be descrambled by your smart card m Power On Channel Use A W lt gt buttons to select the item If your choice is Fixed channel press OK button to display a channel list select a channel and confirm selection with OK button Your receiver will always start with defined channel If your choice is Last Viewed then receiver will awake with the last watched channel www strong tv 19 STRONG PART 1 o English DIGITAL TV m S PDIF Use AW lt P buttons to select the Digital audio mode PCM the receiver will downmix AC3 audio to PCM stereo Dolby the receiver will by pass AC3 audio for future decoding by Digital Audio Amplifier 5 4 2 TV Setting In this menu you can configure the TV setting such as HD type TV type Aspect Ratio Screen Control RGB YUV Brightness Contrast Saturation m HD type Use AW lt P buttons to select the item and press OK button to display the list of options use AY buttons to select a video output resolution and press OK button to confirm selection Tip HD type is not selectable if output mode YUV RGB set to RGB m TV Type Use AV lt P buttons to select the item and press OK button to display the list of options use AY buttons to select TV
34. replace the batteries in the remote control A 2 SPECIFICATIONS Demodulator DVB S Demodulation QPSK 8PSK Input Symbol Rate DVB S QPSK 2 45 Ms s DVB S2 8PSK QPSK 10 30 Ms s FEC Decoder 1 2 2 3 3 4 5 6 7 8 in DVB S2 mode 1 2 2 3 3 4 3 5 4 5 5 6 8 9 9 10 in DVB S2 mode www strong tv 27 STRONG PART 1 e English DIGITAL TV Demodulator DVB T Modulation Demodulation IF bandwidth Guard Interval Code rate Video Decoder Profile Level Input Rate Aspect Ratio Frame Rate Video Resolution Audio Decoder Audio Decoding Audio Mode Frequency Response Sampling Rate Tuner DVB S Connector type Input Frequency Rage RF Impedance Signal Level LNB Power DiSEqC Versions Tuner DVB T Connector type Frequency Rage Signal Level COFDM Spectrum Antenna supply System amp Memory COFDM QSPK 16 64QAM 6 7 or 8 Mhz 1 4 1 8 1 16 1 32 1 2 2 3 3 4 5 6 7 8 MPEG 2 MP ML MP HL MPEG 4 H 264 AVC Max 90 Mbit s 4 3 16 9 Pan amp Scan Letterbox 25 Hz for PAL 30 Hz for NTSC 576p 720p 1080i MPEG 1 Layer 1 amp 2 Dolby Downmix Mono L R Stereo Dolby Digital dd 20 20 kHz lt 2 dB 60 Hz 18 kHz lt 0 5dB 32 44 1 48 kHz F Type IEC169 24 Female 950 2150 MHz 75 Ohm unbalanced 65 to 25 dBm 13 5 18 5 V DC 5 Max 0 5 A max overload protected 1 0 1 2 GOTO X Female 1EC60169 2 75 nominal VHF 174 to 230 MHz
35. rface which have access to the scrambled the pay per view services with various conditional access modules and a valid smart card The programs that can be descrambled are determined by the conditional access module and smart card you use 1 Select Common Interface with A W and press OK 2 Common Interface displays on the screen The phrase Not inserted is indicated when the conditional access module is not installed 3 Insert the conditional access module into Slot 1 or Slot 2 4 The name of the Slot differs according to each inserted conditional access module 5 Press EXIT to return to the previous menu or press MENU to go to current live channel www strong tv 23 STRONG PART 1 English DIGITAL TV 6 0 OTHER OPERATIONS 6 1 Program Guide EPG EPG shows the program schedule for the current channel Availability of EPG depends from broadcast and may not be available for all channels In no menu state press EPG button the EPG Menu will appear Screen is divided to 3 main parts at the left channel list at the right program schedule list and bottom part provide short program description with program start end time In channel list Use AY buttons to choose the channel Use lt P to switch between channel list and program schedule In program schedule list Use AY buttons to choose program Use RED GREEN buttons to select previous next day of schedule Use lt P to switch between channel list and program schedule
36. t the back of the receiver 3 3 Connecting to TV amp VCR Fig 3 Connecting by HDMI cable To fully enjoy your HD TV channels it is advisable to use HDMI or Component video outputs of your receiver Connect one end of HDMI cable to the HDMI output of your receiver and another end of cable to HDMI IN connector on your TV Connecting to component output 1 Make sure to use proper cable 3 RCA on each side of cable usually coloured as Green Blue Red 2 Connect chinches at one side of the cable to YPbPr Green Blue Red outputs on your receiver and another side of the cable to corresponded inputs on your TV Very important to follow colour mark Connecting by SCART cables 1 Connect the TV SCART connector at the back of the receiver to the SCART IN connector on your TV set or connect Video RCA and Audio L R RCA connectors at the back of the receiver to corresponded inputs on your TV set 2 Connect the VCR SCART connector of the receiver to the SCART IN connector on your VCR set TELEVISION POWER hons E CE F Supplied by STRONG amp Co Japan Fig 4 10 www strong tv PART 1 English STRONG DIGITAL TV Note Please make sure that your receiver is connected by SCART or 3 RCA cable Video Audio L R to your TV set when you connect your VCR or DVD to receiver You will not get video signal from your VCR DVD through the receiver if your receiver is connected only by HD
37. t up and Terrestrial settings In first order make sure that Terrestrial settings are correct and corresponds to the country where you leave 5 3 1 Channel set up There are 2 possible ways of terrestrial channels search Manual Search GREEN button and Automatic Search RED button Manual Search Select one or several frequencies by OK button then Manual GREEN to search channels on selected frequencies AutoScan Press Autoscan RED to scan all frequencies in the list On completing the search the receiver will save automatically the services information 5 3 2 Terrestrial settings Use A V lt P buttons to select your Country Antenna Supply and Channel numbering Antenna supply select this option to ON in case you use active antenna powered through coaxial cable The receiver supply DC power 5 V into 50 mA load maximum Channel numbering select this option to Operator defined in case your operator provide logical channel numbering feature Otherwise select Appearing order 5 4 Installation 5 4 1 Preference In this menu you can set up your personal preferences m OSD language Audio language Subtitle language Use A W gt buttons select the item and OK button to display the list m Banner Timeout To set banner duration how long information banner will be displayed on screen Use AV 4P buttons select the item and OK button to display the list m Transparency Use A V gt buttons to select the transpa
38. the right side Select first letter ofthe channel name that you need to find in the list and press OK 24 www strong tv PART 1 o English STRONG DIGITAL TV 6 3 2 Selection of the list From view mode or channel list mode press SAT button to display the selection of available channel lists FAV button to display the list of favourite groups Use A W buttons to select an item in the list and press OK to confirm selection To toggle between TV and Radio channels use TV RAD button Tip FAV will only be displayed if you have already added channels to a FAV list 6 3 3 Favorite list selection From view mode or channel list mode press FAV button and use A W buttons to select favourite group of your choice Press OK to confirm selection Tip If you want to exit from FAV mode press TV RAD button 6 3 4 Selection of Audio Language From view mode press the AUDIO button on your remote control Use lt P buttons to select an audio language from the list of available Use lt P buttons to select audio channel between Left Right and Stereo Press OK to confirm your selection Additionally you can select volume level for this channel 6 3 5 TELETEXT function In channel view mode press TEXT button If Teletext is available in several languages then select language from the list 6 3 6 Subtitles function In channel view mode press SUB button List of available subtitles languages will be displayed on the screen Use lt P butto
39. the starting time of the timer action m Duration Use Numeric buttons to enter the duration of channel view when the Timer mode is set to Time Interval 5 6 Application This menu will help you to use USB Calendar Tetris Game and CAS only use for Conax Smart card 5 6 1 USB The Receiver is equipped with host controller Insert your USB memory device to USB connector Make sure that power consumption of your USB device is not higher then 500 mA In case your USB memory device power consumption is higher make sure to connect an external power supply to your memory device before connecting it to your receiver Usage of memory device with high power consumption may damage your receiver Select USB menu in application with A V and press OK If you would like to backup channels or software to USB memory 1 Press GREEN button and select type of data to store Channel data UDB will store only channels while All SW dates UAD will store software and channels 2 Select one item and press OK to proceed 3 Name of created file will be STB_ALL_MMDDhhmm UAD or STB_DB_MMDDhhmm UDB where MM month when file is created DD date hh hours mm minutes To restore backed up data 1 Select file UAD or UDB and press OK 2 List of possible actions will be displayed Make your choice and press OK to proceed 3 After updating data from selected file your receiver will reboot automatically in 3 seconds 22 ww
40. uct and prevent personal injury never place this product on an unstable stand tripod bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to instruction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter fr
41. vailable satellites Select satellite of your choice and press OK If satellite doesn t exist in the list you should add it first using Edit satellites menu m Dish number move focus of the menu to this item Use lt P buttons to select dish number to which above selected satellite belongs to Press OK button to enter to Dish setup menu Dish number means that selected satellite do not belongs to any dish m Dish position This item value depends on the mode of the Dish If mode of selected dish is Fixed then this item is not selectable If mode of selected dish is DiSEqC 1 2 then value cannot be stored in case dish position for selected satellite was not stored or in range from 1 to 64 if position has been stored Select item and press OK to setup positioner See chapter 5 2 1 1 for more details about Positioner setup If mode of selected dish is GOTO X then value is GOTO X Select item and press OK to setup GOTO X function m Transponder Move focus of the menu to this item and press OK List of transponders of selected satellite will appear at right side of the screen You can select transponder in order to check signal strength and quality of reception Transponder list contains predefined transponders If you need to modify transponder list please use menu Edit satellites as described in chapter 5 2 3 If you need to scan specific transponder then use Manual scan as described in this chapter below www strong tv 15 S
42. w strong tv PART 1 English STRONG DIGITAL TV To format USB memory device Please press YELLOW Button Format A warning window will appear to get your confirmation of operation To delete file Press BLUE Button Delete A warning window will appear to get your confirmation of operation Tip When USB memory device is not inserted to the USB port OSD would not show any files 5 6 2 Calendar Use A W buttons to move to Calendar OK button The calendar will appear on screen Use AV lt q gt buttons to move between days in a month or amp Y buttons to go previous or next Month Press EXIT buttons to return 5 6 3 Tetris Use AY buttons to move to Tetris and press OK button Before starting a game you will be prompt to select level Press numeric button to select a level which you want 1 15 and press OK lt gt Move block to left or right AY Drop block OK Rotate block Press EXIT buttons to exit from game 5 6 4 CAS The receiver is equipped with one slot for Conax smartcard which has access to the scrambled pay per view services 1 Select CAS menu in application with A V and press OK 2 The Screen will show you the version and CAS ID Tip When smartcard is not inserted in CAS slot OSD would not show anything 5 6 5 PDR Here you can adjust your preferred Record Size max duration of record and set Timeshift to ON or OFF 5 7 Common Interface The receiver is equipped with two slots of Common Inte
43. y Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location To avoid damage to the prod
Download Pdf Manuals
Related Search