USER MANUAL R ead the user manual before turning on
Contents
1. CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature Please make sure that there are no obvious transport damages Should you notice any damages on the A C connection cable or on the casing do not take the device into operation and immediately consult your local dealer This device falls under protection class The power plug must only be plugged into a protection class outlet The voltage and frequency must exactly be the same as stated on the device Wrong voltages or power outlets can lead to the destruction of the device and to mortal electrical shock AMERICAN reco Always plug in the power plug last The power plug must always be inserted without force Make sure that the plug is tightly connected with the outlet Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Never touch them with wet hands as this could lead to mortal electrical shock Never modify bend strain mechanically put pressure on pull or heat up the power cord Never operate next to sources of heat or cold Disregard can lead to pow2. Please make sure that the unit cannot be touched or bumped The ambient temperature must always be between 15 C and 45 C Keep away from direct insulation particularly in cars and heaters The relative humidity must not exceed 50 with an ambient temperature of 45 C This device must only be operated in an altitude between 20 and 2000 m over NN Never use the device during thunderstorms Over voltage could destroy the device Always disconnect the device during thunderstorms The symbol q eer E determines the minimum distance from lighted objects The minimum distance between light output and the illuminated surface must be more than this value The device must only be installed on a non flammable surface In order to safeguard sufficient ventilation leave 50 cm of free space around the device The housing must never touch surrounding surfaces or objects Make sure that the area below the installation place is blocked when rigging derigging or servicing the fixture For overhead use mounting height gt 100 cm always fix the fixture with an appropriate safety rope Fix the safety rope at the correct fixation points only The safety rope must never be fixed at the transport handles Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened The maximum ambient temperature T 45 C must never be exceeded Operate the device only after having become familiarized
3. is also valid if the device was exposed to high humidity Also if the device is still running the device must be checked by a specialist if the liquid has reduced any insulation Reduced insulation can cause mortal electrical shock There must never be any objects entering into the device This is especially valid for metal parts If any metal parts like staples or coarse metal chips enter into the device the device must be taken out of operation and disconnected immediately Malfunction or short circuits caused by metal parts may cause mortal injuries HEALTH HAZARD Never look directly into the light source as sensitive persons may suffer an epileptic shock especially meant for epileptics Keep away children and amateurs Never leave this device running unattended OPERATING DETERMINATIONS This device is a LED pixel beam lighting effect for creating decorative effects This product is only allowed to be operated with an alternating voltage of 100 240 V 50 60 Hz and was designed for indoor use only This device is designed for professional use e g on stages in clubs bars theatres etc Lighting effects are not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for a long time without defects AMERICAN reco When choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust There should not be any cables lying around
4. 24 255 AMERICAN reco Normal Shutter Functions 0 15 Pulse effect Forward 16 31 7 A Pulse effect Reverse 32 47 Random Strobe 48 63 TBD 64 255 Press ENT for seconds to enter ENT Status Normal Status 001 Editing Status ENT ADD XXX 001 MOD 3CH 4CH 5CH 6CH 7CH TECHNICAL SPECIFICATIONS Power supply 100 240 V AC 50 60 Hz Power consumption 17W 215 VA DMX control channels 3 4 5 6 7 DMX512 connection DMX amp Power integrated Type of LEDs Osram 10w 4in1 Number of LEDs 1 Beam angle approx 7 Dimensions LxWxH 135x 99 x 140mm Weight 1 6 kg Maximum ambient temperature T Maximum housing temperature T steady state Min distance from flammable surfaces Min distance to lighted object Please note Every information is subject to change without prior notice 10 09 201 AMERICAN reco THANK YOU FOR YOUR TRUST www american pro com AMERICAN PRO develops amp improve products constantly For this reason the specifications and consigned information in the present user manual can me modified without notice TECEeROuw A division of AMERICAN nt Corp www american pro com
5. USER MANUAL TECeEROw A division of AMERICAN nt Corp www american pro com Read the user manual before turning on the product 1 Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual consider this manual to be part of the total product keep this manual for the entire service life of the product pass this manual on to every further owner or user of the product download the latest version of the user manual from the Internet For your own safety please read this user manual carefully before you initially start up INTRODUCTION Thanks for choosing a TECSHOW product ION Series is built to satisfy the most demanding users We are confident that our excellent products and service will satisfy you Unpack the device you will find following items inside the box The fixture device User manual Omega holder with quick lock fastener DMX amp Power integrated cable 1 5m PONS SAFETY INSTRUCTIONS This device has left our factory in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual Ss Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems
6. er cord damages fire or mortal electrical shock The cable insert or the female part in the device must never be strained There must always be sufficient cable to the device Otherwise the cable may be damaged which may lead to mortal damage Make sure that the power cord is never crimped or damaged by sharp edges Check the device and the power cord from time to time If extension cords are used make sure that the core diameter is sufficient for the required power consumption of the device All warnings concerning the power cords are also valid for possible extension cords Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord Otherwise the cable or plug can be damaged leading to mortal electrical shock If the power plug or the power switch is not accessible the device must be disconnected via the mains If the power plug or the device is dusty the device must be taken out of operation disconnected and then be cleaned with a dry cloth Dust can reduce the insulation which may lead to mortal electrical shock More severe dirt in and at the device should only be removed by a specialist There must never enter any liquid into power outlets extension cords or any holes in the housing of the device If you suppose that also a minimal amount of liquid may have entered the device it must immediately be disconnected This
7. with its functions Do not permit operation by persons not qualified for operating the device Most damages are the result of unprofessional operation Please use the original packaging if the device is to be transported Please consider that unauthorized modifications on the device are forbidden due to safety reasons DESCRIPTION OF THE DEVICE Specification Light source 1pcs OSRAM 10W 4in1 leds Led life 60 000 hours Luminous Flux 500lumen 7300lux 1m DMX channels 3 4 5 6 7 15 25 lens available for beam or wash effect Power Max power consumption 17W Power supply Electronic auto ranging Input voltage range 100 240V 50 60Hz AMERICAN reco Overview Ls Body Bracket Display Enter button Up button DMX amp Power cable 6 DMX protocol Channel name function La A 3CH 4CH 5CH 6CH 7C 1 1 1 1 1 Red Red Dimmer 0 100 0 255 2 2 2 2 2 Green Green Dimmer 0 100 0 255 3 3 3 3 3 Blue Blue Dimmer 0 100 0 255 4 4 4 4 White White Dimmer 0 100 0 255 5 5 5 Dimmer Dimmer Close to Open 0 255 Normal Shutter Functions Close 0 31 Strobe Rate slow to fast 32 223 Open 224 255 Pulse effect Forward Close 0 31 Strobe Rate slow to fast 32 223 Open 224 255 6 shutter Pulse effect Reverse Close 0 31 Strobe Rate slow to fast 32 223 Open 224 255 Random Strobe Close 0 31 Strobe Rate slow to fast 32 223 Open 2
Download Pdf Manuals
Related Search