F200 User Manual
Contents
1. 1200 Car Camcorder User Manual Contents NOTE O CUCU ON JAR IR INN RSA FI 3 1 1 Features 403 RN eons 3 1 2 Package Content a nanaaaaananasannananannananaauni 3 1 3 Product OVEervieW anaaaanuanaaaaaaaanasanaanananuanananaaaa 4 Getting Stared aina TE IR 5 2 1 Inserting the Memory Card a aiananaaaaaaaasasaananan 5 2 2 Installing in Vehicles aaiaaaaaaaaaanasasasasasaanananani 6 2 3 Connecting tO POWwer nnaizaaanaaaaaaaanananaananannanan 7 2 4 Powering the Device On Off 00 00 00 sara 8 2 5 Initial Settings aiaaaaaaaanasaaaananananuanananuananananuana 9 Using the Car Camcorder a aaaaaannaann nnunnnnani 10 3 1 Recording Videos a aaanuannaaaaaanasasaanananaanananaaaa 10 3 2 Playback Videos and Photos 2iaiaiaiavavari 14 Adjusting the Settings aaaaaazaaaaaaannu nanunnunnnnunnna 18 4 1 Using the Menu a anaaaaaaaaaaaaaaaananananananaanananani 18 4 2 Menu free ee 19 Specifications sn 21 About this Guide The content in this document is for information purpose and is subject to change without prior notice We made every effort to ensure that this User Guide is accurate and complete However no liability is assumed for any errors and omissions that may have occurred The manufacturer reserves the right to change the technical specifications without prior notice For the2. 2 2 1 Mount to Windshield 1 Attach the device to the bracket base Turn and tighten the car holder and the bracket base to make sure the device is securely locked in place 2 With the suction cup laying flat position the suction cup on the windshield 3 Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield Make sure the base is securely locked in place 2 2 2 Adjust Device Position Knob a a E R oe e s a a Rotate the knob to swivel Rotate the knob to swivel the the device vertically device horizontally up to 360 2 3 Connecting to Power Use only the supplied car adapter to power up the device and charge the built in battery 1 Connect one end of the car adapter to the USB connector of the device 2 Plug the other end of the car charger to the cigarette lighter socket of your vehicle Once the vehicle engine is started the device automatically turns on Note The orange LED lights up while the battery is charging Please take note if the environment temperature reaches 45 C or above the car adapter still can supply power to device but it will not charge the Lithium ion battery This is the characteristic of Lithium ion and is not a malfunction The figure is a suggestion only You may choose another way to route the power cable 2 4 Powering the Device On Off 2 4 1 Auto Power On Off Once the vehicle engine is sta
3. Assist Lamp Yes Microphone Yes Yes 2 an Description Interface Mini USB Mini C Type HDMI Battery Built in 470MAH Li polymer rechargeable Operating 0 50 C Temperature Operating RR Humidity 20 70 RH Storage 20 80 C Temperature 22 Copyright 2013 All rights reserved All other marks products or company names mentioned in this guide are trademarks of their respective companies
4. 3 1 1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled the device automatically turns on and starts recording Recording will automatically stop when the engine is switched off Or press the W button to stop recording manually Note On some cars the recording will continue when the engine is switched off If this happens do one of the following Manually turn off the cigarette lighter Remove the car adapter from the cigarette lighter 3 1 2 Record all other types of videos 1 Press the OK button to start recording 2 Press the W button to stop recording Note One video file is saved for every 3 or 5 minutes of recording See Using the Menu on page 18 The device saves the recording in the memory card If the memory card capacity is full the oldest file in the memory card is overwritten 10 3 1 3 Emergency Recording During video recording press the OK button to continuously record the video in one file until the memory card storage is full or the recording is manually stopped To stop the recording press the W button Note If the Collision Detection function is enabled and a collision is detected the device will automatically trigger the emergency recording See Using the Menu on page 18 II 3 1 4 The Recording Screen MR 2 KRASE a 7 3 ae I 6 tem Description Indicates the recording duration Dat dt Indicates t
5. cifically designed for real time video and audio recording when driving 1 1 Features Full HD camera 1920x1080 30fps 2 4 LCD color screen Wide angle lens High power LED for low light environments Motion detection Automatic Emergency recording for collision detection Supports SDHC up to 32GB 1 2 Package Contents The package contains the following items In case there is any missing or damaged item contact your dealer immediately Car Recorder Bracket Car adapter or nl Srey h ues D 1 3 Product Overview Top and Bottom Views Front View Rear View Reset Button Wide Angle Lens Speaker LCD Panel Back Button USB Connector Enter Button OK HDMI Connector LED Light Note To operate the device press the corresponding buttons 6 13 15 according to guide icons shown the screen Down Button Y 5 mictopnone 73 UpButton a 4 2 Getting Started 2 1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the device Push the memory card until it clicks into place Use class 6 or above the micro SD cards for this machine Format the micro SD cards before the initial use To remove the memory card Push to eject the memory card out of the slot Note Do not remove or insert the memory card when the device is turned on This may damage the memory card 5 2 2 Installing in Vehicles
6. d 2 Press the button to enter the OSD menu 3 Press the A W button to select the ppm file category that you want to browse and press the OK button Emergency 4 Press the A W button to view the 2 next or the previous file and press S the K button to view the file in full screen Note From the standby screen you can directly enter Playback mode by pressing button The last recorded video is displayed on the screen 14 3 2 1 Playing Videos To play videos do the following 1 If recording is in progress press the W button to stop recording Press the gt button to enter the OSD menu Press the button to select File Playback and press the OK button Press the A W button to select Video or Emergency and press the OK button Press the amp button to browse for the desired video file and press Video 01 06 2012 01 01 12 00 00 the K button to play the video La Se Press the OK button to pause the n ear playback Press it again to resume p T OK 3 2 2 Viewing Photos To view photos do the following 1 If recording is in progress press the W button to stop recording Press the button to enter the OSD menu Press the 4 W button to select File Playback and press the OK button Press the A W button to select Picture and press the OK button Press the button to browse for the desired photo file and press the OK button to view t
7. display OSD menus K r Y OK Gollalan Detechon Delay stu Language File Deletion 1 If recording is in progress press the Record button to stop recording 2 Press the gt button to open the OSD menu 3 Press the button to select a menu option and press the OK button to enter the selected menu 4 Press the 4 W button to select the desired setting and press the OK button to confirm the setting 5 Press the button to exit the menu I8 4 2 Menu Tree Refer to the below table for details on menu items and available menu options Menu Description Available option option Auxiliary Enable Disable the LED light On Off Light File Select the file category that Video Emergency Playback you want to view F Date Date Time _ Time Set the date and time the date and Set the date and time Time a Enable Disable the date EE Off stamp Resolution Set the video resolution 1080P 1920x1080 720P 1280x720 LCD Setting Set the duration for the On Turn Off After 30 display to automatically turn Sec Turn Off After 3 off right after video recording min Off starts Voice Enable Disable the voice On Off Record recording Beep Beep Enable Disable the beep On Off Automatic Enable Disable the device to On Off Record automatically record video after the device is turned on Record Set the recording duration for 3 mins 5 mins Interval each recorded v
8. electric power consumption of electrical and electronic household and office equipment and the Directive 2009 125 EC of the European parliament and of the council establishing a framework for the setting of eco design requirements for energy related products Notes on Installation 1 Install the device near the rear view mirror to obtain the best open field view 2 Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains 3 Do not touch the lens with your fingers Finger grease may be left on the lens and will result in unclear videos or snapshots Clean the lens on a regular basis Do not install the device on a tinted window Doing so may damage the tint film 5 Make sure that the installation position is not hindered by the tinted window MODEL SP5 Li Polymer 3 7V 470mAh 1 7Wh Be sure to use only the supplied battery and charger The use of any other type of battery or charger may damage the device and void your warranty Caution Use the authorized charger only Do not take apart or attempt to service the camcorder Do not expose the camcorder to moisture or extreme temperatures Do not use abrasive chemicals cleaning solvents or strong detergents to clean the product Wipe the product with a clean slightly damp soft cloth 9 9 9 1 Introduction Thank you for purchasing the HP Car Camcorder This device is spe
9. he current recording date ate ana Ume and time Guide icon Press the gt button to enter the OSD Menu menu Battery Indicates the remaining battery power Guide icon Press the W button to stop the 5 l Stop recording Press the OK button to continuously record the video in one file until the recording is manually stopped 7 Guide icon Press the button to switch to Playback Playback mode Guide icon Emergency 12 3 1 5 Using the LED Light You can use the LED light to provide extra light when the lighting is insufficient To enable the LED light do the following 1 Press the button to enter the OSD menu 2 Press the 4 W button to select Auxiliary Light and press the OK button 3 Press the button to select On and press the OK button Auxiliary Light of 4 Press the gt button to exit the menu Note Turn off LED lights when the battery is low When using LED lights for a long time it may become hot Take care not to touch the hot LED lights 3 1 6 Taking Snapshot You can also use this device to take snapshots of the current scene From the standby screen press the W oe 2012 01 01 12 00 00 S button to take a snapshot r Note If recording is in progress press the W button to stop the recording 15 3 2 Playback Videos and Photos 1 If recording is in progress press the W button to stop recording The standby screen is displaye
10. he file in full screen 15 3 2 3 The Playback Screen Video Playback Screen Photo Playback Screen Description Date and time Indicates the recorded date and time Guide icon Press the button to return to file Back selection display Guide icon Press the button to view the Previous previous video photo Guide icon Press the W button to view the next Next video photo Guide icon Press the OK button to pause the Pause video playback Indicates the elapse time Battery Indicates the remaining battery power n 6 3 2 4 Deleting Files To delete file s do the following 1 If recording is in progress press the W button to stop recording 2 Press the button to enter the OSD menu 3 Press the amp button to select eee File Deletion and press the OK wer button 2 ee 4 Press the A W button to select the file category and press the OK button F r OK 5 Press the amp button to select the file that you want to delete and press the OK button to enter the Delete menu 6 Press the 4 W button to select an option tem Desorption Delete One Delete the current file Delete All Delete all files 7 Press the OK button to confirm delete Note Deleted files cannot be recovered Ensure the files have backup before deletion 17 4 Adjusting the Settings 4 1 Using the Menu You can customize the video recording and other general settings via the on screen
11. ideo file Motion Enable Disable the motion On Off Detection detection If this function is enabled and the device detects any object movement it will automatically start the recording 19 Menu Description Available option option Collision Enable Disable the collision High Sensitivity Detection detection If this function is Normal Sensitivity enabled and any collision is Low Sensitivity off detected the device will automatically trigger the emergency recording Delay Set the delay duration before 10 Sec Off Shutdown turning off the power Language Set the on screen display menu language File Deletion Delete the file s Video Emergency Picture TV standard Set the TV type based on NTSC PAL your local region Format Format the memory card C Reset all settings to factory Yes No default settings 20 Ul Specifications Description Image sensor 1 3 2 CMOS sensor Effective pixels 2592 H x 1944 V Storage media Support Micro SDHC up to 32GB class 4 or above LCD display 2 4 LCD color TFT 112K pixels Wide Angle Fixed Focus lens SERS F2 4 f 3 0mm Focus range 1 5m Infinity Resolution Full HD 1920 x 1080 30fps Movie Clip HD 1280 X 720 30fps Format mov Still image Resolution 5M 2592 x 1944 Snapshot Format DCF JPEG Exif 2 2 Electronic shutter Auto 1 2 1 2000 sec 3 Axis G Force sensor Auto White Balance Auto
12. latest reversion please visit www hp com support FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Caution Any changes or modifications not express
13. ly approved by the party responsible for compliance could void the user s authority to operate this equipment WEEE Notice Disposal of Waste Electrical and Electronic Equipment and or Battery by users in private households in the European Union This symbol on the product or on the packaging indicates that this can not be disposed of as a household waste You must dispose of your waste equipment and or battery by handling it over to the applicable take back scheme for the recycling of electrical and electronic equipment and or battery For more information about recycling of this equipment and or battery please contact your city office the shop where you purchased the equipment or your household waste disposal service The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment CE Regulatory Notice This equipment complies with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility 2004 108 EC the Low Voltage Directive 2006 95 EC the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive 2002 95 EC Turkish EEE Directive the Commission Regulation EC No 1275 2008 implementing Directive 2005 32 EC of the European Parliament and of the Council with regard to eco design requirements for standby and off mode
14. rted the device automatically turns on If the Automatic Record function is enabled the recording will automatically start right after the device turns on see Set Automatic Recording on page 9 Once the vehicle engine shuts down the device automatically saves the recording and turns off the power within 10 seconds see Delay Shutdown on page 20 2 4 2 Manual Power On Off To manually turn on the power press the POWER button To turn off press and hold the POWER button for at least 2 seconds 2 5 Initial Settings Before using the device we recommend you to enable the Automatic Record function and set up the correct date and time 2 5 1 Set Automatic Recording To enable the recording to start automatically after you turn on the power do the following 1 Press the button to enter the OSD menu 2 Press the A W button to select Automatic Record and press the OK button 3 Press the button to select On and press the OK button 4 Press the BACK button to exit the menu 2 5 2 Set the Date and Time To set the correct date and time do the following 1 Press the button to enter the OSD menu 2 Press the amp button to select Date Time and press the OK button 3 Press the A W button to adjust the l st tlsl value and press the OK button to move to another field 4 Repeat step 3 until the date and time setting is complete 3 Using the Car Camcorder 3 1 Recording Videos
Download Pdf Manuals
Related Search