CX403 1-1/2 HP METALWORKING DUST
Contents
1. e CX403 1 1 2 HP METALWORKING DUST COLLECTOR USER MANUAL TABLE OF CONTENTS General Safety Instr CtiollS 3 UTE SIS 4 Physical suasana ae 5 UMPACKINO 6 Proper u oriri 6 PSSOMDIY Ser 7 ON OFF 8 Connecting Machines to Dust 20 4 000 8 oe 9 9 LUDNGATION ert 9 Machine Storage caca tva ta tUa t Ma AMA tM 9 Emptying Collection eee ees 9 Re placing Filler 10 Pans 11 Iud 12 Warranty 13 CRRFTEX CX SERIES GENERAL SAFETY INSTRUCTIONS FOR MACHINES Extreme caution should be used when operating all power tools Know your power tool be familiar with its operation read through the owner s manual and practice safe usage procedures at all times ALWAYS read and understand the user manual before operating the machine CONNECT your machine ONLY to the matched and specific power source ALWAYS wear safety glasses respirators hearing protection and safety shoes when operating your machine DO NOT wear loose clothing or2. brand of equipment that is exclusive to Busy Bee Tools For replacement parts directly from Busy Bee Tools for this machine please call 1 800 461 BUSY 2879 and have your credit card and part number handy e All returned merchandise will be subject to a minimum charge of 15 for re stocking and handling with the following qualifications Returns must be pre authorized by us in writing We do not accept collect shipments Items returned for warranty purposes must be insured and shipped pre paid to the nearest warehouse Returns must be accompanied with a copy of your original invoice as proof of purchase Returns must be in an un used condition and shipped in their original packaging a letter explaining your reason for the return Incurred shipping and handling charges are not refundable e Busy Bee will repair or replace the item at our discretion and subject to our inspection Repaired or replaced items will be returned to you pre paid by our choice of carriers e Busy Bee reserves the right to refuse reimbursement or repairs or replacement if a third party without our prior authorization has carried out repairs to the item e Repairs made by Busy Bee are warranted for 30 days on parts and labour e Any unforeseen repair charges will be reported to you for acceptance prior to making the repairs e The Busy Bee Parts amp Service Departments are fully equipped to do repairs on all products purchased from us with the exception of some
3. ETALWORKING DUST COLLECTOR As part of the growing line of Craftex metalworking equipment we are proud to offer the CX403 a 1 1 2 HP Metalworking Dust Collector By following the instructions and procedures laid out in this user manual you will receive years of excellent service and satisfaction The CX403 is a professional tool and like all power tools proper care and safety procedures should be adhered to Jl so 1 1 2 HP 220 V 60 Hz Single Phase _AmpSu u uu u aeta 9 Amps Milo RE 2 Filter Bag 30 Micron Easy Clean out Collection Drawer Yes ON OFF Switch with Safety Key Yes Collection Drawer Dimension 14 x 17 3 4 x 8 Dust Collection Ports One 5 with a Removable Y Inlet 4 Each Four Casters for Portability Yes Overall Dimensions 43 x 33 x 26 Powder Coated Paint Yes Warraniy 3 Years CRRFTEX 4 9 SIT CX403 1 1 2 HP METALWORKING DUST COLLECTOR PHYSICAL FEATURES ON OFF Name Plate Switch with Filter Bag Salen Kay Craftex CX Series Logo Cabinet Door Cabinet Door Lock Y Coated Paint e RAFTE 5 UNPACKING The machine is properly packaged and shipped completely in a box for safe transportation When unpacking carefully inspect the box and ensure that nothing has been damaged during tr
4. ansit Open the box and check that the machine and the parts are in good condition NOTICE While doing inventory if you can not find any part check if the part has already been installed on the machine Some parts come pre assembled for shipping purposes PROPER GROUNDING Grounding provides of least resistance for electric current to reduce the risk of electric shock 220 Grounded Outlet 3 Prong Grouding Plug Figure 1 220 volts outlet for CX403 To prevent electrical hazards have a qualified electrician ensure that the line is properly wired This machine is for use on a normal 220 volts circuit Make sure that EE the machine is connected to an outlet having the same configuration as the plug If an adaptor plug is used it must be attached to the metal screw of the receptacle It is strongly recommended not to use extension cords with your CX403 Always try to position your machine close to the power source so that you do not need to use extension cords If it necessary to use an extension cord make sure the extension cord does not exceed 50 feet in length and the cord is 14 gauge to prevent motor damage Check for heat build up periodically WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded Your CX403 should be w
5. he power source and store it in a dry place Do not expose the machine to rain Make sure to keep the cord away from potential damage sources such as sharp objects chemicals heat sources and water EMPTYING COLLECTION DRAWER The CXA403 features a collection drawer inside the cabinet where it throws all the dust The drawer on your dust collector e must be checked and emptied regularly The machine operates at much higher level of efficiency when the collection drawer is empty Emptying the drawer is very simple and easy Make sure the switch is in the OFF position and the cord is disconnected from the power source Open the cabinet door and pull the drawer out using the handle See figure 9 Figure 9 Emptying collection drawer Empty the drawer slide it back in place and close the cabinet door CRRFTEX CX SERIES REPLACING THE FILTER BAG To replace the filter bag on CX403 make sure the switch is the OFF position and the cord is disconnected from the power source Remove the bag clamp securing the bag to the dust collector Once the clamp is removed the bag will come off Replace the bag with a new one and tighten the clamp to secure the new filter bag to the dust collector See figure 10 Bag Clamp Filter Bag Figure 10 Replacing filter bag 10 CX403 PARTS DIAGRAM CX403 PARTS LIST DESCRIPTION SPECIFICATION Q Casters 22 5 16 x1 2 ollection B
6. ired with a 3 prongs plug fitting a 3 prong grounded receptacles as shown in figure 1 Do not remove the grounding prong to fit it into a 2 pronged outlet Always check with a qualified electrician if you are in doubt ASSEMBLY To assemble your 403 follow the instructions given below The CX403 comes with four swivel casters for portability To install the casters Put a piece cardboard on the floor to prevent the dust collector body from being scratched Get the help of a friend or assistant and position the dust collector on the cardboard on its side Attach the swivel caster to the dust collector base by aligning the four holes on the base with the four holes on the swivel caster bracket and securing it using screws and washer provided See figure 2 Figure 2 Installing the casters Once the casters are installed put the dust collector up upright and attach the filter bag to the dust collector Secure it using bag clamp provided See figure 3 Bag Clamp Filter Bag Figure 3 Installing the filter bag Attach the four holes on the handle with the holes on top part of the dust collector and thread the screws to secure the handle to the dust collector See figure 4 Handle Figure 4 Installing the handle The CX403 comes with a Y inlet which allows using two machines with the dust collector at the same time To install the Y inlet Align the holes on the Y inlet with the holes on the dust col
7. jewelry when operating your machine SAFE ENVIRONMENT is important Keep the area free of dust dirt and other debris in the immediate vicinity of your machine BE ALERT DO NOT use prescription or other drugs that may affect your ability or judgment to safely use your machine DISCONNECT the power source when changing drill bits hollow chisels router bits shaper heads blades knives or making other adjustments or repairs NEVER leave a tool unattended while it is in operation NEVER reach over the table when the tool is in operation ALWAYS keep blades knives and bits sharpened and properly aligned ALL OPERATIONS MUST BE performed with the guards in place to ensure safety ALWAYS use push sticks feather boards or other safety devices to safely feed your work through the machine ALWAYS make sure that any tools used for adjustments are removed before operating the machine ALWAYS keep the bystanders safely away while the machine is in operation NEVER attempt to remove jammed cutoff pieces until the saw blade has come to a full stop NEVER expose the machine to rain Store the machine in a safe amp dry place WARNING The safety instructions given above can not be complete because the environment in every shop is different Always consider safety first as it applies to your individual working conditions CRRFTEX 3 X SERIES CX403 DUST COLLECTOR FEATURES MODEL CX403 1 1 2 HP M
8. lector and secure it using screws provided See figure 5 lt gt CRAFTE SZ Y Inlet Figure 5 Installing the Y inlet ON OFF SWITCH The CX403 is equipped with a rocker type ON OFF switch used to run the dust collector and stop it ON OFF Switch Figure 6 ON OFF switch The ON OFF switch features a safety key which prevents from unauthorized usage When you are not using the dust collector for a long period of time remove the safety key When the safety key is removed the switch does not work and the dust collector does not turn on See figure 7 lt gt CRAFTEX Y CX SERIES Figure 7 Removing the safety key CONNECTING MACHINES TO DUST COLLECTOR The 403 features a 6 main inlet and comes with a Y inlet having two 4 ports When connecting machines to the dust collector use proper sized hoses and make sure all the connections are sealed tightly Figure 8 Two 4 dust port to be used with two machines at the same time When you are using only one of the ports with a machine simply put the end cap provided onto the other port TEST RUN Now that you have assembled your machine completely it is time for a test run to make sure that the machine works properly and is ready for operation All the tools and objects used for assembling the machine should be removed and cleared away during the test run WARNING Before starting the dust collector make sure that you have read and
9. od ollection Bag u Motor Plank Bs z mu Tel massa UNRIE CORNEA 33 1 lt gt CRAFTEX CX SERIES NO TET s Esa lt gt CRAFTEX WV c WARRANTY CRAFTEX 3 YEARS LIMITED WARRANTY Craftex warrants every product to be free from defects in materials and agrees to correct such defects where applicable This warranty covers three years for parts and 90 days for labour unless specified otherwise to the original purchaser from the date of purchase but does not apply to malfunctions arising directly or indirectly from misuse abuse improper installation or assembly negligence accidents repairs or alterations or lack of maintenance Proof of purchase is necessary All warranty claims are subject to inspection of such products or part thereof and Craftex reserves the right to inspect any returned item before a refund or replacement may be issued This warranty shall not apply to consumable products such as blades bits belts cutters chisels punches etceteras Craftex shall in no event be liable for injuries accidental or otherwise death to persons or damage to property or for incidental contingent special or consequential damages arising from the use of our products RETURNS REPAIRS AND REPLACEMENTS To return repair or replace a Craftex product you must visit the appropriate Busy Bee Tools showroom or call 1 800 461 BUSY Craftex is a
10. products that require the return to their authorized repair depots A Busy Bee representative will provide you with the necessary information to have this done e For faster service it is advisable to contact the nearest Busy Bee location for parts availability prior to bringing your product in for repairs e S Cs 13
11. understood the manual and you are familiar with the functions and safety features on this machine Failure to do so may cause serious personal injury Plug the cord to the power outlet and turn the dust collector ON See if the dust collector operates correctly During the test run if there is any unusual noise coming from the machine or the machine vibrates excessively shut off the machine immediately and disconnect the cord from the power source Check all the parts you have assembled once again and investigate to find out the problem If the dust collector operates correctly turn the machine OFF and remove the safety key on the switch Once the safety key is removed turn the switch ON The machine should not run with the safety key removed MAINTENANCE During the life of your machine you will need to practice some regular maintenance to keep your saw in peak performance condition Check the dust collector daily for loose mounting bolts screws damaged wires worn switch full collection bag and any other unsafe condition WARNING Make sure the machine is turned off and the cord is disconnected from the power source before servicing and removing replacing any components on the machine LUBRICATION The shaper has sealed lubricated bearings in the motor housing and arbour assembly and do not require any lubrication MACHINE STORAGE When the dust collector is not in use disconnect the cord from t
Download Pdf Manuals
Related Search