ARC-19516A - ArcVision
Contents
1. TERMINAL RES CONFIG EN 1111111 CHANNEL NO 1234567890123456 RES YOON Figure 8 15 8 8 BEEP WHEN KEY PUSHED Select YES NO to enable disable buzzer to buzz 8 9 VIDEO SYSTEM Three are three kinds of parameters for video system setting For color version AUTO Auto detects NTSC or PAL if the channel 1 camera connected NTSC Set video system as NTSC PAL Set video system as PAL 8 10 COLOR BAR ArcVision Technology Corp 16 ARC 19516 Display color bar in order to adjust the monitor 8 11 LOAD FACTORY DEFAULT On the main menu select LOAD FACTORY DEFAULT and press ENTER to enter the menu on Figure 8 16 to setting LOAD FACTORY DEFAULT EN P LOAD DEFAULT SETTING AND CLEAR ALARM LIST P LOAD DEFAULT SETTING Figure 8 16 8 11 1 LOAD DEFAULT SETTING AND CLEAR ALARM LIST Load the parameters of factory default and erase alarm list 8 11 2 LOAD DEFAULT SETTING Load the parameters of factory default ArcVision Technology Corp 172. 50 fields sec for PAL Full duplex except Channel 16 for recording and displaying Smart auto switch Supports programmable channel sequence and automatic skip unconnected channels Supports freeze function for multi windows and full image display at normal and playback modes Supports 2X zoom function for full image at normal and playback mode Supports sixteen channel external alarm input ports and N C N O programmable property Record event lists power on video loss motion detection and alarm input up to 256 records Supports general and time lapse VCR recording mode for VCR and provides external trigger 2H 12H 24H real time 24H 48H 72H 120H 168H 240H 480H 720H 960H for record time setting Supports priority record function Build in RTC for date and time display Each camera supports camera title setting for up to seven characters Supports user friendly hierarchy set up menu Build in color bar generator for adjusting monitors 2 Specification Refresh rate i Color Version NTSC 60 fields sec PAL 50 fields sec Resolution HxV NTSC 860x525 PAL 860x625 CCIR 601 standard Video input port BNCx16 cameras with loop out BNCx1 REC play inputs Video output port BNCx1 Monitor out BNCx1 Call Monitor our and BNCx1 REC Record out Video output signal 1 Vp p 75O CVBS out Video output format Full Multi windows 4 6 7 8 9 10 13 and 16 split Auto switch Title generator Up t
3. while set to YES Setting NO will make the alarm output to be kept over the alarm duration and can t stop by user 8 6 8 SHOW ALARM LIST At the menu of Figure 8 9 select SHOW ALARM LIST and press ENTER key to show the alarm list The alarm list is shown as Figure 8 14 V 01 01 01 12 05 00 A 01 01 01 11 50 20 ON P 01 01 01 10 02 30 M 01 01 01 08 22 13 Figure 8 14 8 6 9 CLEAR ALARM LIST e ALARM LIST P01 a The first and the second fields denote alarm event CHI A The first channel alarm input triggered Where A denotes alarm input that s been triggered CH2 V The second channel video loss Where V denotes video loss ON P Power up Where P denotes power up CH3 M The third channel motion occurring Where M denotes motion The 3 rd field is the date of event occurring The data format is the same as the setting by 8 1 2 The last field is the time of event occurring User can use lt gt or lt gt key to turn the next page or the previous page e Press EXIT to escape the alarm list On the menu of Figure 8 9 select CLEAR ALARM LIST and press ENTER to clear the alarm list 8 7 TERMINAL RES CONFIG On the main menu select TERMINAL RES CONFIG and press ENTER to enter the menu of Figure 8 15 to the setting terminal impedance Set Y to connect the impedance N to open the impedance
4. ALARM DURATION 01 MIN SENSOR TYPE N O ALARM LIST NO BUZZER ENABLE YES ALARM FULL SCREEN NO ALARM OUTPUT YES ANY KEY TO STOP YES P SHOW ALARM LIST ALARM 3 P CLEAR ALARM LIST SENSOR ENABLE YES SENSOR TYPE N O BUZZER ENABLE YES ALARM OUTPUT YES Figure 8 9 Figure 8 10 ArcVision Technology Corp 13 ARC 19516 8 6 1 ALARM 1 2 3 CONFIGURE On the menu of Figure 8 9 select ALARM 1 2 3 CONFIGURE and press ENTER to enter the menu on Figure 8 10 8 6 1 1 Set o Set o SENSOR ENABLE n YES to enable the sensor detection n NO to ignore the sensor 8 6 1 2 SENSOR TYPE Set o n N C for normal close sensor N O for normal open sensor 8 6 1 3 BUZZER ENABLE Set o Set o n YES to turn the internal buzzer on when a valid alarm occurs n NO to keep the buzzer to mute 8 6 1 4 ALARM OUTPUT Set o Set o n YES to turn the relay on if a valid alarm occurs n NO to keep relay to the current state 8 6 2 VIDEO LOSS CONFIG On the menu of Figure 8 9 select VIDEO LOSS CONFIG press ENTER key to enter next menu on Figure 8 11 VIDEO LOSS CONFIGURE EEE DETECT ENABLE YES BUZZER ENABLE YES ALARM OUTPUT YES 8 6 2 1 Set o Figure 8 11 DETECTION ENABLE n YES to detect video loss and NO to disable video loss detection 8 6 2 2 BUZZER ENABLE Set o Set o n YES to turn the internal buzzer on if
5. hours 240H 480 hours 480H 720 hours 720H 960 hours 960H 6 2 PLAYBACK Because the playback path VCR input path and channel 16 uses the same path therefore channel 16 will not be recorded while using playback function ArcVision Technology Corp 7 ARC 19516 7 Alarm Function 7 1 ALARM TYPES There are four kinds of alarm events a Power on time and date sequence b Video signal loss c Motion has been detected d Trigger by external alarm input 7 2 RESPONSE TYPES OF ALARM There are four types of responses a Buzzer turns on b Relay turns on c Priority recording when triggered by external alarm input or motion detection d Alarm list 7 3 THE ALARM EVENTS PROCESS There are four kinds of alarm event a When the power on event occurs the time in which it is put ON is also recorded It doesn t affect the buzzer and it is able to check whether or not it has once been turned off b When video loss occurs the relay and buzzer will be turned ON if they are enabled in the menu set up The event could also be written to the alarm list c The multiplexer supports 16 channel external alarm inputs user can set the property for every alarm sensor When external alarm triggers the relay and buzzer will be turned ON if they are enabled in the menu set up The event could also be written to the alarm list d The multiplexer supports motion detection for each input camera c
6. seconds Sequence 2 gt Display full image of camera 1 standby 3 for seconds Sequence 3 Display full image of camera 2 and standby for 3 seconds Sequence 4 Display full image of camera 3 and standby for 3 seconds Sequence 17 gt Display full image of camera 16 and standby for 3 seconds Sequence 18 gt Skip the sequence Sequence 24 Skip the sequence 8 3 CALL CHANNEL SEQUENCE Setting The CALL CHANNEL SEQUENCE to config the video sequence for call monitor out The setting method is very similar to AUTO CHANNEL SEQUENCE except the CAM can t be set H 16 split images ArcVision Technology Corp 11 8 4 CAMERA SET UP In the main menu select CAMERA SET UP and press ENTER to enter the menu on Figure 8 4 CAMERA SET UP EN CAMERA TITLE ERN B CAMERA TITLE P CAMERA 1 CHI B CAMERA TITLE DISPLAY P CAMERA 2 CH2 B CAMERA 1 2 3 SET UP P CAMERA 3 CH3 B CAMERA 4 5 6 SET UP P CAMERA 4 CH4 B CAMERA 7 8 9 SET UP P CAMERA 5 CH5 B CAMERA 10 11 12 SET UP P CAMERA 6 CH6 B CAMERA 13 14 15 SET UP P CAMERA 7 CH7 lB CAMERA 16 SET UP P CAMERA 8 CH8 pm CAMERA 9 CH9 P CAMERA 10 CHIO p CAMERA 11 CHII p CAMERA 12 CHI2 p CAMERA 13 CH13 p CAMERA 14 CHI4 P CAMERA 15 CHI5 p CAMERA 16 CHI6 Figure 8 4 Figure 8 5 8 4 1 CAMERA TITLE ARC 19516 Edit the camera title
7. ARC 19516 Sixteen Channels Duplex Video Multiplexer User s Manual ARC 19516 CONTENTS 2003 07 30 V1 1 040064 1 Introduction 2 2 Specification 2 3 Installation 3 4 Function Key Description 5 5 Operation Mode 6 6 Recording and Playback 7 7 Alarm Function 8 8 Menu Set Up 9 ArcVision Technology Corp 1 ARC 19516 1 Introduction The sixteen channels multiplexer has the following features SOP DO ON P t POS JA GENE C 15 16 17 18 19 Sixteen channels video input with loop out and dynamic terminal resister settings Provides three video output ports monitor out call out and REC out Automatically detect NTSC PAL video system Video input signals with AGC Auto Gain Control function Adopt E A L Erase Asynchronous Line technique Support full image and multi windows 4 6 7 8 9 10 13 and 16 split display format Multi windows display refresh rate at 60 fields sec for NTSC
8. In the menu of Figure 8 4 select CAMERA TITLE and press ENTER to enter the menu on Figure 8 5 Select the camera to edit its title and press ENTER key to enter edit procedure to edit the title Every title contains up to 7 characters After finish editing press EXIT to return to the menu of Figure 8 4 CAMERA TITLE DISPLAY EEE CAMERA 1 2 3 SET UP EEE CAMERA 1 0N CAMERA 1 CAMERA 2 0N BRIGHTNESS 20 CAMERA 3 0N CONTRAST 40 CAMERA 4 0N CHROMA 17 CAMERA 5 0N SHARPNESS 10 CAMERA 6 0N CAMERA 7 0N CAMERA 2 CAMERA 8 ON BRIGHTNESS 20 CAMERA 9 0N CONTRAST 40 CAMERA 10 0N CHROMA 17 CAMERA 11 0N SHARPNESS 10 CAMERA 12 0N CAMERA 13 0N CAMERA 3 CAMERA 14 0N BRIGHTNESS 20 CAMERA 15 0N CONTRAST 40 CAMERA 16 0N CHROMA 17 SHARPNESS 10 Figure 8 6 Figure 8 7 8 4 2 CAMERA TITLE DISPLAY On the menu of Figure 8 4 select CAMERA TITLE DISPLAY and press ENTER to enter the menu on Figure 8 6 Set to ON to display the camera titles and OFF for no title display ArcVision Technology Corp 12 ARC 19516 8 4 3 CAMERA 1 2 3 SET UP On the menu of Figure 8 4 select CAMERA 1 2 3 SET UP and press lt ENTER gt to enter the menu on Figure 8 7 to set brightness contrast chroma and sharpness for each camera 8 5 VCR SET UP On the main menu select VCR SET UP and press ENTER to enter the menu on Figure 8 8 VCR SET UP EN RECORDI
9. LEFT TOP TOP RIGHT TOP LEFT BOTTOM BOTTOM and RIGHT BOTTOM 8 1 7 TEXT COLOR The text color can be set to one of the following value COLOR 0 White COLOR 2 Cyan COLOR 1 Green COLOR 3 Yellow ArcVision Technology Corp 10 ARC 19516 8 2 AUTO CHANNEL SEQUENCE In the main menu select AUTO CHANNEL SEQUENCE and press ENTER to enter the menu on Figure 8 3 AUTO CHANNEL SEQUENCE EN SEQ CAM SEC SEQ CAM SEC PENES P13 2 3 gt 2 1 3 b14 13 3 p 3 2 3 P15 14 3 gt 4 3 3 gt 6 I5 3 gt 5 4 3 P 16 3 gt 6 5 3 bi8 3 P7 6 3 P19 3 P 8 7 3 bk20 3 gt 9 8 3 21 3 P10 9 3 p2 3 Pil 10 3 gt 23 3 P12 11 3 gt 24 3 Figure 8 3 8 2 1 SEQ sequence In the auto sequence mode the order of the switches are in these following sequence 1 2 and 24 and switch back to 1 Press ENTER to enter the edit procedure to edit dwell channel and dwell time After editing press EXIT key to escape 8 2 2 CAM dwell channel There are eighteen values that can be set H to display 16 split images 1 16 to display the full image of camera 1 16 to skip the sequence to next sequence 8 2 3 SEC dwell time The standby auto sequence time time unit second Press ENTER key to activate the edit procedure After editing press EXIT key to escape 8 2 4 FOR EXAMPLE Take Figure 8 3 for example Sequence 1 gt Display 16 split images and standby for 3 for
10. NG TIME RECORDING TYPE FRAME BY two Ew z Figure 8 8 8 5 1 RECORDING TIME The multiplexer supports synchronous and asynchronous mode for VCR Synchronous mode To operate this mode the recording time must be set to SYNC and the signals to TRIGGER OUT and GND the VCR must be connected to the multiplexer Using synchronous mode is recommended if your VCR supports this function Asynchronous mode The multiplexer supports 2 hours 2H 12 hours 12H 24 hours 24H 24hours real motion 24RH 48 hours 48H 72 hours 72H 120 hours 120H 168 hours 168H 240 hours 240H 480 hours 480H 720 hours 720H 960 hours 9600 User must set the time to 2H when it is not a time lapse VCR 8 5 2 RECORDING TYPE Recording type can be set to FIELD field by field or FRAME frame by frame It is only effective when the recording time is set to 2H 8 6 ALARM PROCESSOR On the main menu select ALARM PROCESSOR and press ENTER to enter the menu on figure 8 9 ALARM PROCESSOR EN ALARM 1 2 3 CONFIGURE HEB B ALARM 1 2 3 CONFIGURE ALARM 1 B ALARM 4 5 6 CONFIGURE SENSOR ENABLE YES B ALARM 7 8 9 CONFIGURE SENSOR TYPE N O B ALARM 10 11 12 CONFIGURE BUZZER ENABLE YES B ALARM 13 14 15 CONFIGURE ALARM OUTPUT YES E ALARM 16 CONFIGURE W VIDEO LOSS CONFIGURE ALARM 2 B MOTION SET UP SENSOR ENABLE YES
11. a valid video loss occurs n NO to keep the buzzer to mute 8 6 2 3 ALARM OUTPUT Set o Set o n YES to turn the relay on if a valid video loss occurs n NO to keep relay to the current state ArcVision Technology Corp 14 ARC 19516 8 6 3 MOTION SET UP On the menu of Figure 8 9 select MOTION SET UP press ENTER key to enter next menu on Figure 8 12 8 6 3 1 ALL MOTION ENABLE Set NO to disable all channel motion detection P PEE EB Set YES allow user to enable motion detection for individual channel ALL MOTION ENABLE NO T TT T ID 8 6 8 2 CHANNEL MOTION SET UP E UN S On the menu of Figure 8 12 select one channel you want to do motion x Lap EE set up press lt ENTER gt key to enter next menu on Figure 8 13 u Eu ome BE W CH4 MOTION SET UP 8 6 3 2 1 ENABLE B CH5 MOTION SET UP Set YES to enable the motion detection of this channel Li CH6 MOR SET Set NO to disable the motion detection of this channel MICH MOTION SET UE M CH8 MOTION SET UP 8 6 3 2 2 DETECTION WINDOW SET UP MICH MOTION SET UP Draw up the detection area The whole screen was divided into 10x14 E CH1O MOT ION SET UP of detection cells Each detection cell can be turned on or off W C11 MOTION SET UP individually W CH12 MOTION SET UP Select this item and press ENTER then a pink cursor appear on E CHI 3 MOTTON SET UP the screen Move the cursor using blue arro
12. amera input User can set motion window and detection sensitivity for each ArcVision Technology Corp ARC 19516 8 Menu Set Up 8 0 THE STRUCTURE OF MENU gt E B TIMER OSD SET UP l AUTO CHANNEL SEQUENCE B CAMERA SET UP B VCR SET UP B ALARM PROCESSOR B TERMINAL RES CONFIG BEEP WHEN KEY PUSHED NO VIDEO SYSTEM AUTO PCOLOR BAR B LOAD FACTORY DEFAULT Figure 8 1 The main menu is shown in Figure 8 1 Use the main menu as an example to introduce the structure of menus a The title of menu Located on the top left side of the first line MAIN MENU b Levels indicator Located on the top right side of the first line The symbol W represents level indication of the menu One symbol indicates that the menu is on level 1 two symbols B lE indicates that the menu is on level 2 and so on c Item indicator Cursor Half tone area indicates that the item is available for setting d The type field of the item Located on the left is the type field of the item There are three kinds of item indicators W Denotes that there is a sub menu by pressing ENTER to active it under next menu MP Denotes that there is no sub menu but user needs to press ENTER key to access the items No symbol Denotes that user can press lt gt lt gt key to set value to the previous or the next and decrease or increase t
13. he numbers e Item Use the Figure 8 1 for example TIMER OSD SET UP the first item selected by the Item indicator ArcVision Technology Corp ARC 19516 8 1 TIMER OSD SET UP TIMER OSD SET UP EN DATE DISPLAY ON DATE FORMAT YY MM DD PDATE 01 01 01 TIME DISPLAY ON PTIME 00 00 01 TIMER POSITION BOTTOM TEXT COLOR COLOR 1 Figure 8 2 In the main menu use lt gt or lt gt key to select TIMER OSD SET UP and press ENTER to enter the menu of Figure 8 2 8 1 1 DATE DISPLAY Set ON to display the date and OFF to turn off the date display 8 1 2 DATE FORMAT The date format can be one of the following YY MM DD year month day MM DD YY month day year DD MM YY day month year 8 1 3 DATE Set date according to the date format shown on Figure 8 2 Select DATE item and press lt ENTER gt key to enter the editing procedure After finishing press lt EXIT gt to return to the menu on Figure 8 2 Note User must control the date in February by oneself 8 1 4 TIME DISPLAY Set to ON to display time and OFF to turn off the time display 8 1 5 TIME On the menu in Figure 8 2 select TIME item and press lt ENTER gt to enter the editing procedure After time setting press lt EXIT gt to return to the menu on Figure 8 2 8 1 6 TIMER POSITION Set the position to display time and date The position can be one of the following
14. modes on the multiplexer Mode Description Normal The multiplexer automatically enters into normal mode when the power has been put on Press camera selection key to view the full image Press lt MULTI WIN gt key to view multi window images Multi window supports 4 6 7 8 9 10 13 and 16 image split This mode supports freeze function under multi window and full image Multi windows freeze L1 Under multi window of the normal mode presses lt FREEZE gt key to enter freeze function User can freeze or release any channel selected while the LED indicator of the Freeze key is ON 2 Press camera channel selection key to select a camera channel that you want to freeze the image of the related camera is than frozen In order to release frozen image s press the camera selection key again to select a camera when the LED indicator for the camera channel selection lights up it indicates that the image has been released When the light of the LED indicator for the camera goes off the image is released and begins to refresh 3 User can freeze and release image s for every camera channel independently 4 To quit the freeze mode press FREEZE key again to return to multi window of normal mode Full image freeze L Under full view of the selected camera channel press camera channel selection key again to freeze the image The LED indicator of selected channel begins to flash 2 Press lt MULTI WIN gt key or camera channel selection ke
15. o 7 characters for each channel Timer generator Built in RTC real time clock 432 W x 270 D x 44 H mm Power source IDC 12V 10 18W max 1500mA 12V Power consumption Recommend adapter DC 12V 1 5A switching mode power adapter ArcVision Technology Corp 2 ARC 19516 3 Installation Back Panel CALL OUT REC IN SAI DC 12V 2A EXTERNAL 1 0 ooo E 1 COM REC TRIG oadieviawvoa MontrorouT RECOUT 3 1 Power Supply DC 12V t1096 1500mA DC 12V 1 5A switching mode power adapter is recommended 3 2 ALARM I O There is a DB25 connector on the left side of the back panel which is connected to the external alarm sensor and time lapse VCR trigger input REC TRIG VCR trigger input port 2 ALARM 1 External alarm input 1 3 ALARM3 External alarm input 3 4 GND Ground 5 ALARM6 External alarm input 6 6 ALARM 8 External alarm input 8 7 ALARM 9 External alarm input 9 8 ALARM 11 External alarm input 11 9 GND Ground 10 ALARM 14 External alarm input 14 11 JALARM 16 External alarm input 16 12 RELAY OUT N C Relay output normal close terminal 13 RELAY OUT N O Relay output normal open terminal 14 GND Ground 15 ALARM2 External alarm input 2 16 ALARM 4 External alarm input 4 17 ALARM 5 External alarm input 5 18 ALARM 7 External alarm input 7 19 GND Gro
16. ont panel button key 4 1 Camera selection keys camera No 1 16 Press this key to select full view of the desired camera channel when under normal or playback mode condition Function Key 4 2 Press MULTI WIN key to display the Multi Window image Multi Window supports 4 6 7 8 9 10 13 and 16 image split when under normal or playback mode condition 4 3 Press SEQ key to enter auto sequence mode when under normal mode condition 4 4 Press PLAYBACK key to enter the playback mode return to normal mode press this button again when under normal mode condition 4 5 Press FREEZE key to freeze image s See next page operation mode for detail when under normal or playback multi window image condition 4 6 Press ZOOM key to zoom image See next page operation mode for detail when under normal or playback full image 4 7 Press MENU key to enter set up mode 4 8 MENU FUNCTION KEYS AT MENU SET UP MODE RED Move cursor to the above item during menu operation Move to the left item during editing procedure RED Move cursor to the next item during menu operation Move to the right item during editing procedure f BLUB Cursor movement for motion window setting Pan or Tilt for zoom function Next value NS Previous value EXIT Exit the menu or editing procedure ENTER Enter to sub menu or editing procedure ArcVision Technology Corp 5 5 Operation Mode There are four operational
17. und 20 ALARM 10 External alarm input 10 21 ALARM 12 External alarm input 12 22 ALARM 13 External alarm input 13 23 ALARM 15 External alarm input 15 24 GND Ground 25 RELAY OUT COM Relay output common terminal ArcVision Technology Corp 3 ARC 19516 3 3 REC TRIGGER INPUT PORT REC trigger input port for VCR trigger signal input is on the right side of the DB25 3 4 VIDEO OUT 3 4 1 MONITOR OUT Connect the BNC connector for MONITOR OUT on the Mutiplexer and the other end to VIDEO IN on the Monitor 3 4 2 CALL OUT Connect the BNC connector for CALL OUT on the Mutiplexer and the other end to VIDEO IN on another Monitor The video format outputs from this port is programmable and displays full size image of any camera input It acts as a smart video switcher 3 4 3 REC OUT Connect BNC connector for REC OUT on the Multiplexer and the other end to VCR IN on the VCR 3 5 REC IN Connect the BNC connector for REC IN to the VCR for VIDEO OUT on the VCR 3 6 VIDEO IN amp LOOP OUT The camera line is connected to Camera Video IN and the nine channel loop out path is supplied for alternative usage ArcVision Technology Corp ARC 19516 4 Function Key Description 16 CHANNEL DUPLEX I ee ease ena CACR MULTIPLEXER ww EB e F E See 15 16 IMULTI WIN SEQ PLAY BACK FREEZE ZOOM MENU uL A Ae Front Panel From the left fr
18. w keys to target detection a CH14 MOT ION SET UP cell press lt gt key to turn on the cell or lt gt key to turn off the cell BI CHI 5 MOTTON SET UP Once the detection cell is turned on it becomes green half tone W CHI6 MOTION SET UP Figure 8 12 8 6 3 2 3 SENSITIVITY User can adjust detection sensitivity If detection object is small the value of sensitivity should increase until a M symbol appear on the right bottom corner of screen NABLE YES ETECTION WINDOW SET UP 8 6 3 2 4 BUZZER ENABLE ENSITIVITY 10 Set Es to enable buzzer Once buzzer is enabled the UZZER ENABLE YES buzzer will active if motion occurs LARM OUTPUT YES 8 6 3 2 4 ALARM OUTPUT ENABLE Set YES to enable relay Once alarm output is enabled the relay will active if motion occurs Figure 8 13 8 6 4 ALARM DURATION The alarm output will keep for a time interval called alarm duration if a valid alarm occurs The unit of the alarm duration is set in second 8 6 5 ALARM LIST Set on YES to save the alarm event as a record when a valid alarm occurs and to NO for not saving 8 6 6 ALARM FULL SCREEN Set on YES to switch to full view of the related camera from quad view when a valid alarm occurs It will take effect under normal or sequence modes Setting NO will keep the current viewing 8 6 7 ANY KEY TO STOP ArcVision Technology Corp 15 ARC 19516 User can press any key to stop the alarm output when alarm output accrues
19. xit playback mode and goes back to normal mode Menu set up Under normal or sequence mode press MENU key to enter menu set up mode Refer page 9 8 Menu set up for more details 6 Recording and Playback ArcVision Technology Corp ARC 19516 ARC 19516 The multiplexer is full duplex The full duplex means to record multiple cameras and playback synchronously 6 1 RECORD The multiplexer can support general VCR or time lapse VCR recorder a TO RECORD USING EXTERNAL TRIGGER SIGNAL FROM TIME LAPSE VCR The time lapse VCR recorder generates a trigger signal from VCR trigger to signal multiplexers when it is the time to switch channels We recommend using this feature when user s VCR recorder supports this feature Using this feature the record time must be set to SYNC and interconnect VCR and ARC 19516 The acceptable trigger signal is a falling edge negative trigger b RECORD BY SETTING RECORDING TIME The multiplexer can calculate channel switching time by setting recording time at menu set up The recording time of the multiplexer must match the recording time set on the VCR recorder If general VCR are been used the recording time must be set to 2H and the user can choose from FILED or FRAME as recording type The multiplexer supports SYNC 2 hours 2H 12 hours 12H 24 hours 24H 24 hours real time 24RH 48 hours 48H 72 hours 72H 120 hours 120H 168 hours 168H 240
20. ys to release the camera channel to multi window image or full image of the selected camera channel This mode supports 2X zoom function under full image L Under full image press lt ZOOM gt key the zoom LED indicator lights up and 2X image displays on monitor 2 Use the blue arrow key to pan or tilt the 2X image 3 Press ZOOM again to leave 2X zoom to normal full image Auto Sequence Under normal mode press SEQ key to enter sequence mode Under this mode the monitor displays images according to user s definition of channel sequences and dwell time Refer to page 11 8 2 CHANNEL SEQUENCE for more details To exit sequence mode L Press camera channel selection key or lt MULTI WIN gt key to exit auto sequence mode and enter normal mode 2 Press lt PLAYBACK gt key to enter playback mode 3 Press MENU key to enter menu set up mode Playback In normal or sequence mode press lt PLAYBACKs gt key to enter the playback mode Under this mode user can playback VCR that was recorded by this multiplexer It is impossible to view images recorded by another multiplexer Support multi windows images and full image view Multi window format is deferent from normal mode It only supports 4 9 and 16 split Support freeze function for multi win image and full image It is the same as normal mode Support 2X zoom function under full image It is the same as normal mode Press lt PLAYBACK gt key again to e
Download Pdf Manuals
Related Search