Optional Lens USER`S MANUAL
Contents
1. Removing while the cooling plate is still hot may result in burns AN W When attaching take care so that dust not enter inside AN Continued use with dust inside may result in fire or electric shock Caution AN W When replacing the lens do not touch the LCD panels or polariz ing plates of the LCD projector or subject them to shocks This can cause damage to the equipment It can also cause a misalignment of the optical adjustment and therefore require readjustments AN Mi When replacing the lens be careful not to damage the connectors or wires inside the LCD projector This can cause damage to the equipment Be careful not to pull on the connectors or wires or get them caught in the circuit board or case A W After replacing the lens part of the lens and louver Only for models LENS 037 and LENS 038 may stick out from the LCD projector Transporting the LCD projector in the original projector shipping box can cause damage to the equipment Follow these Instructions Mi Do not touch the lens directly with your hands or fingers This can dirty the lens and cause deterioration in image quality W The lens is a precision optical device Carefully handle the lens without subjecting it to shocks or vibrations Mi When resting the lens on a surface place the lens face down on a soft cloth Replacing the Lens 1 Remove the front cover 1 Remove the 2 screws marked A triangle from the inside of the lens knob cover Le2. manual and option lens user s manual Short focal length projection lens louver lens cap strapx2 Short throw lens LENS 038 lens replacement manual and option lens user s manual Standard Standard Standard projection lens projection lens Lens lens replacement manual and option lens user s manual Long focal length projection lens zoom window lens cap Long throw lens LENS 039 strap lens replacement manual and option lens user s manual Ultra long throw LENS 040 Ultra long focal length projection lens zoom window lens cap lens g strap lens replacement manual and option lens user s manual Important Safety Instructions Always follow these instructions Please read this section on important safety instructions before replacing the projector lens To prevent accidents during lens replacement and ensure product safety after replacing the lens be sure to follow the safety instructions described herein Fixed short throw lens Short throw lens These symbols indicate actions that can result in injury or damage if these operations are not followed correctly A W This symbol indicates that there is a possibility of serious arning injury or even death if the operation is not followed correctly AC ti This symbol indicates that there is a possibility of physical injury aution or damage to equipment if the operation is not followed correctly These symbols indicate the types of precautions that must followed This sym
3. 311 7 9 6 Projection Distance Aspect ratio 4 3 uD 716 18 2 NOTE The distance of projection may not allow focusing on the peripheral area of the screen Adjust the focus to keep the center and the peripheral area of the screen balanced This specifications are subject to change without notice The zoom lens may cause some distortion of the image on the screen depending on the zoom position Distortion may appear on screen if the keystone correction trapezoidal distortion correction is overly adjusted Keystone correction trapezoidal distortion correction may be limited with some lenses 6 Projector 480 12 2 941 23 9 642 16 3 y Projection Distance inch x Diagonal Screen size inch Min y 0 0410x 0 1084 Max y 0 0800x 0 1055 300 7 6 939 23 9 1797 45 6 400 10 2 1254 31 9 2398 60 9 500 12 7 1569 39 9 2999 76 2 y Projection Distance inch x Diagonal Screen size inch Min y 0 0800x 0 1372 Max y 0 1526x 0 1352 QR68561 Lens Replacement Manual This manual describes the procedure for replacing the following lenses Lens LENS 037 LENS 038 Standard projection lens Standard Lens Long throw lens LENS 039 Ultra long throw lens LENS 040 Supplied Accessories The following accessories are included with each lens Lens Model Supplied accessories Fixed short throw LENS 037 Fixed short focal length projection lens louver lens cap strapx2 lens lens replacement
4. NS to the left end or right end may cause the shading at a Manual Zoom Manual Focus Manual Zoom Manual Focus Project an image as described in the LCD Projector corner area 1 as shown in the illustration below This Lens Shift Position Vertical 10 0 1 1 Lens Shift Position Vertical 10 0 1 1 user s manual and adjust the size and focus of the lens cannot display the projected image properly in these Specifications Specifications projected image areas so adjust the left right lens shift dial not to have the F Number 2 1 2 9 F Number 2 231 See the Projection Distance table in this user s manual shading in the projected image Focal Length 32 63mm Focal Length 63 117mMm for information on optional lens projection distances 1 The corner area of the projected image may appear Zoom Ratio o 2 0 Zoom Ratio 1 9 In order to optimize keystone distortion correction dark or be shaded Throw Distance Ratio 1 2 0 3 9 Throw Distance Ratio 1 3 9 7 4 Screen Sizes 40 500inch Screen Sizes 40 500inch trapezoidal distortion correction make note of the Lens Type shown on the label of the optional lens to be used and select this lens type on the LCD Projector s option menu For more information see the Lens Type of the Service item of the Settings Menu in the LCD Projector user s manual Shifted to the left end Shading Shifted to the right end Shading Projection Distance Aspect ratio 4 3 mene 109 2 8
5. Optional Lens USER S MANUAL SAFETY INSTRUCTIONS A Warning E For safety do work in accordance with the A N Exchange Manual to install this product E Please read this manual and manuals for the LCD projector to be used thoroughly to ensure A correct usage through understanding Incorrect usage could result in fire an injury or damage E Do not give any shock or impact Any shock or impact could result in an injury or SO damage The lens part is projected Take care not to strike it NOTE E Take care of the lens When carrying it protect the lens parts with lens cap Do not scratch and polish the lens with hard object Do not touch the lens to prevent fog or dirt of the lens that cause deterioration of display quality E Cleaning Use commercially available lens tissue to clean the lens used to clean cameras eyeglasses etc Excepting for lens use a soft cloth to clean When excessively soiled dilute a neutral detergent in water wet and wring out the soft cloth Do not use detergents or chemicals other than those Model LENS 037 Fixed Short Throw Lens LENS TYPE 2 Fixed Zoom Manual Focus Lens Shift Position 4 directional 1 1 Fixed Specifications F Number Lu Focal Length 13mm Throw Distance Ratio 1 0 8 Screen Sizes 40 350inch Projection Distance Aspect ratio 4 3 Diagonal S ize Projection Distance inc inch m 10 0 6 y Projection Distance inch x Diagonal Screen s
6. bol indicates that This symbol warns of possible caution must be taken high heat electrical shock must not be performed Important Operation Instructions A Warning AN W Before replacing the projector lens be sure to read this manual and the operation manual of the LCD projector for use with this lens To ensure safe operations and the continued safety of this product be sure to follow all of the safety instructions written in this manual and the operation manual of the LCD projector AN W Do not place the lens in a location subject to direct sunlight or other strong lighting or near heat radiating equipment This can cause a fire due to the properties of the lens It can also cause injury or damage to the lens SO W Do not subject the lens to shocks This can cause injury or damage to the lens A W Be sure to unplug the LCD projector before replacing the lens The inside of the LCD projector has areas of high voltage which can cause electrical shock AN W Do not touch the fan of the LCD projector during operation AN This can cause injury QR68561 A W Before replacing the lens be sure to turn off and unplug the LCD projector and allow at least 45 minutes for the projector to fully cool Before replacing the lens be sure to turn off and unplug the LCD projector and allow at least 45 minutes for the projector to fully cool A E When removing the louver first shut off the projector and wait approximately ten minutes
7. ize inch y 0 0165x 0 0553 LENS 037 Notes on Use When using this optional lens adjust the projected image position using the following procedure 1 Adjust the up down lens shift dial to the DOWN direction Model LENS 038 Short Throw Lens LENS TYPE 3 Manual Zoom Manual Focus Lens Shift Position Vertical 10 0 1 1 Specifications F Number 1 9 2 6 Focal Length 20 32mm Zoom Ratio 1 6 Throw Distance Ratio 1 1 2 2 0 Screen Sizes 40 350inch Projection Distance Aspect ratio 4 3 l Projection Distance Diagonal Screen size nchii 10 nem 40 1 0 38 1 0 62 1 6 60 1 5 58 1 5 94 2 4 y Projection Distance inch x Diagonal Screen size inch Min y 0 0255x 0 0599 Max y 0 0408x 0 0558 Model Standard Lens LENS TYPE 1 Manual Zoom Manual Focus Lens Shift Position Vertical 9 1 1 1 Specifications F Number 1 7 2 1 Focal Length 24 29mm Zoom Ratio 1 2 Throw Distance Ratio 1 1 5 1 8 Screen Sizes 30 350inch Projection Distance Aspect ratio 4 3 paon y Projection Distance inch x Diagonal Screen size inch Min y 0 0309x 0 0416 Max y 0 0371x 0 0484 same for ceiling installations 2 Adjust the left right lens shift dial to the center position Adjusting the left right lens shift dial to shift the lens noted above e g benzene or thinners Model LENS 039 Long Throw Lens LENS TYPE 4 Model LENS 040 Ultra Long Throw Lens LENS TYPE 5 OPERATIO
8. n flicker created by projector heat exhaust when using a lens with a shorter focus than Standard Lens and must be used with such lenses 1 Attach the 4 hooks on the bottom of the louver to the slots on the projector When attaching attach the bottom right hook on the louver to the bottom right slot closest to the lens on the projector 4 Louver bottom right Hook on bottom right of louver 2 Raise the top of the louver towards the top of the projector and attach the 4 hooks on the top of the louver to the slots on the projector 7 This is the projector with the louver attached Only models LENS 037 and LENS 038 J X If the projector is installed in a high gt location use the strap to attach the qpe e 8 Use the included lens cap to protect the lens surface when the projector is not in use X Use the lens cap attached to the LCD projector for model Standard Lens X Attach the lens cap by passing the strap through the loop on the lens cap and the included rivet If unnecessary remove the currently attached lens cap for Standard Lens
9. ns knob cover 3 Turn the lens shift dial and raise the projection lens to the highest position ae 4 Remove the front cover while holding the zoom window up as shown in the illustration Zoom window Front cover 2 Insert your finger from the side turn the lens to the left and remove while pulling up on the lens lock lever as shown in the illustration Lens lock lever detail X Caution when removing lens N Lens lock lever Be sure not to touch the prism behind the lens Zs 3 Attach the replacement projection lens 1 Line up the notched tab on the lens mount with the hole on the upper left part of the holder and insert the lens Lens mount tab detail Hole on upper left of holder NI VIP IYON Lk DA Notched tab on lens mount X The other two tabs are not notched S 4 Reattach the front cover to complete lens replacement 1 Reattach the front cover LA Ja Replace with the enclosed g f S zoom window for models b Ze LENS 039 and LENS 040 Front cover 3 Re fasten the 2 screws marked A triangle that were removed in step 1 1 Lens knob cover 5 This is the projector after lens replacement IS completed a 6 Attach the louver Only for models LENS 037 and LENS 038 X This attachment prevents scree
Download Pdf Manuals
Related Search