WARMER/MERCHANDISER 51000
Contents
1. 00 e Fax 515 232 55052. OWNERS MANUAL MODEL WARMER MERCHANDISER Professional Popcorn Machine PART NUMBER 51000 115 volts 60 hz WARNING ELECTRICAL SHOCK HAZARD FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH Electrical ground is required on this appliance Do not modify the power supply cord plug If it does not fit the outlet have a proper outlet installed by a qualified electrician 3 Do not use an extension cord with this appliance 4 Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded SAFETY INSTRUCTIONS 1 Plug electrical cord into a certified electrical outlet with a corresponding voltage rating as listed on the machine model labels 2 Always unplug the electric cord when appliance is not in use and before cleaning adjusting or maintaining this steamer Do not operate with a damaged cord or plug or after the machine malfunctions has been dropped or damaged Use authorized service for examination electrical or mechanical adjustment or repair 3 This equipment will be HOT during use and for a short time after it is turned off BE CAREFUL To avoid burns do not let bare skin touch hot surfaces If provided use handles when moving this appliance Keep combustible materials away from appliance 4 Extreme caution is necessary when any appliance is used by or near children and whenever the appliance is left operating and unattended 5 This appli
3. ance is not intended for use in wet locations Never locate appliance where it may fall into a water container Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electrical shock fire or damage to the appliance NO me Benchmark USA Inc e PO Box 475 e Ames IA 50010 USA e Tel 877 432 5500 e Fax 515 232 5505 Diagram p HINGE id a KNOD PMMA COVER _TOP COVER CORN POST ge CLAMP HEATER d SS F HEATING ELEMENT TERMINATION HOX a TERMINATION BOs COVER POWER SWITCH A STAINLESS STEEL GLASS LINER PROFILE FRONT GLASS SUPPROT STAINLESS STEEL SEPARATE PLATE BOTTOM TRAY DROP DOOR GLASS LINER PROFILE lt POWER CABLE Assembly Instructions 1 Attach Knob to the fill door using enclosed screw N ee Attach Deflection board by sliding the tabs into the slots on the front corner posts Slide the board up and insert the tabs into the slots on the crossbar Insert the drop door by placing the tabs into the slots on the bottom tray Attach any of the enclosed signs to either the front or back depending on merchandising position using the two screws already in the corner posts Plug the machine into a properly grounded 120 volt outlet Fill the machine with product through the top fill door Turn on the warming element with the front lighted switch the machine will be on when the switch is illumina
4. replacement of any parts or components that in the opinion of Benchmark USA are defective F O B the factory or at any other location that Benchmark USA may designate WHAT VOIDS THE WARRANTY 1 Any piece of equipment that has been installed operated or maintained inconsistently with Benchmark USA operating instructions 2 Any part or component that has been modified changed or altered from its original configuration 3 Any electrical component that has been damaged due to submergence in any liquid 4 Any part or component that has been subject to abuse misuse neglect or accidents EXTENT OF WARRANTY Any defective component part or assembly returned to Benchmark USA will be replaced by Benchmark USA Benchmark USA will not be responsible for any expenses incurred by the customer under the terms of this warranty nor shall it be responsible for any damages either consequential special contingent or otherwise or expenses or injury arising directly or indirectly from the use of a Benchmark USA product Any component part or assembly returned to Benchmark USA must be returned at the customers expense along with proof of purchase Benchmark USA reserves the right to determine whether the terms of this warranty have been properly complied with In the event that the terms are not complied with Benchmark USA shall be under no obligation to honor this warranty Benchmark USA Inc e PO Box 475 e Ames IA 50010 USA e Tel 877 432 55
5. ted Turn the machine off when not in use Page 2 Cleaning Turn off the machine and unplug it from the power source Remove any remaining food product from the machine Remove the Drop Door Separate Plate and Bottom Tray from the Machine and clean ina sink or dishwasher with mild detergent Clean out any food product from the base of unit with a damp cloth and mild detergent Clean the glass panels and cover with any standards glass cleaner Re assemble the machine Plug the machine back into the 120 volt power source ook Wh ce i Wiring Diagram Parts List Part Description Part Description 4020 5202 Bottom Tray 4031 PMMA Cover 5203 1012 Clamp Heater 5204 Separate Plate 1011 Heating element 2003 Master Switch Lighted 5201 5205 Glass Panel To Order Parts Contact Benchmark USA Inc P O Box 475 Ames IA 50010 USA Tel 877 432 5500 Fax 515 232 5505 Email parts benchmarkusainc com Page 3 Three Year Warranty THE WARRANTY Benchmark USA warrants the original purchaser of new food equipment manufactured by Benchmark USA to be free from defects in material or workmanship from the date of the original purchase for a period of three years WHO IS COVERED BY THIS WARRANTY The original purchaser who has provided proper proof of the original retail purchase and all other requested information WHAT IS WARRANTIED The obligation of Benchmark USA under this warranty is limited to the
Download Pdf Manuals
Related Search