C66301K-MN User manual - Eurohome Kitchens and Appliances
Contents
1. Model description ose BNC ARR SN EESE Guarantee Customer Service Centres EURO LINE APPLIANCES LENGTH OF WARRANTY EURO LINE WILL PAY FOR TWO YEAR FULL WARRANTY Replacement parts and or labour to repair defects in materials or workmanship Service must be provided by an authorized Euro Line company unless advised otherwise from original date of purchase including parts and labour to the first purchaser of this appliance THIS GUARANTEE DOES NOT COVER COMMERCIAL USE The name Euro Line Appliances for service matters incorporates work performed by authorized service agents or service companies EXCEPTIONS EURO LINE APPLIANCES WILL NOT PAY FOR THE FOLLOWING SERVICE CALLS To install or correct the installation of an appliance To instruct the use of an appliance To replace house fuses re set circuit breakers or correct house wiring To correct house plumbing To clean drains filters or garbage disposers To repair an appliance if it fails due to misuse or abuse EURO LINE APPLIANCES WILL NOT PAY WHEN THE FOLLOWING OCCURS 1 Damage resulting from fires acts of God alteration improper installation or installation not in accordance with local building codes 2 Pickup or delivery of major appliances requiring service The appliances are designed to be repaired in the home However Euro Line will not be responsible for travelling and labour costs if the customer lives in excess of 50 km 30 mi2. Warning This must be read The laws ordinances directives and standards in force in the country of use are to be followed safety regulations proper recycling in accordance with the regu lations etc Installation may only be carried out by a qualified electrician The minimum distances to other appliances and units are to be observed Anti shock protection must be provided by the installation for example drawers may only be installed with a protective floor directly underneath the appliance The cut surfaces of the worktop are to be protected against moisture using a suitable sealant The sealant seals the appliance to the work top with no gap Do not use silicon sealant between the appliance and the work top Avoid installing the appliance next to doors and under windows Otherwise hot cookware may be knocked off the rings when doors and windows are opened Risk of injury from electrical current e The electrical mains terminal is live e Make electrical mains terminal free of voltage e Follow connection schematic Observe electrical safety rules e Ensure anti shock protection by installing correctly e The appliance must be connected to the electrical supply by a qualified elec trician Risk of injury from electrical current e Loose and inappropriate plug and socket connections can make the terminal overheat e Have the clamping connections correctly installed by a qualified electrician e Use strain relief cl
3. The cooking zone was only on for a short time and is there fore not hot There is still residual heat on the cooking zone The highest heat setting is set E The heat setting was set using the sensor field The On Off sensor field has been covered up e g by a cloth Overheating protection for the cooking zone has been trig gered Automatic switch off has been triggered Switch the appliance on again Deactivate the child safety device See the section Child safety device Only touch one sensor field Remove any objects pan cloths etc that are lying on the control panel Switch the appliance on again Switching off STOP GO Remove objects If the cooking zone is sup posed to be hot call the Cus tomer Service Department Let the cooking zone cool down The highest heat setting has the same power as the auto matic warm up function 1 Switching off the cooking zone 1 Set the cooking zone using the sensor field Do not place any objects on the control panel Switch off the cooking zone Switch the cooking zone on again Switch off the cooking zone Switch the cooking zone on again What to do if EJ gt and number are displayed Electronics fault Disconnect the appliance from the electrical supply for a few minutes Take the fuse out of the house s wiring system If after switching on again is displayed again call the cus tomer service department If you are unable to
4. e For safety reasons the cleaning of the appliance with steam jet or high pres sure cleaning equipment is not permitted How to avoid damage to the appliance e The glass ceramic can be damaged by objects falling onto it e The edge of the glass ceramic can be damaged by being knocked by the cook ware Cookware made of cast iron cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway e To avoid damaging cookware and glass ceramics do not allow saucepans or frying pans to boil dry e Do not use the cooking zones with empty cookware or without cookware MAW Description of the Appliance Description of the Appliance Cooking surface layout Single cooking zone 1200 W Multi purpose zone 1500 2400 W ae SS S Triple cooking zone 800 1600 2300 W Control panel Single cooking zone 1200 W Control panel layout ne PR ae indicators Heat setting selection with pilot light Timer function Heat setting indicator Timer display Triple ring cooking zone switch with pilot lights Timer On Off with power indicator Multi purpose zone switch with pilot light Description of the Appliance Touch Control sensor fields The appliance is operated using Touch Control sensor fields Functions are con trolled by touching sensor fields and confirmed by displays an
5. PF Control panel Display To switch on Touch SToP Go To switch off Touch stop Go heat setting that was previously set not automatic warm up function Timer functions are not stopped by STOP GO mic STOP GO locks the whole control panel except the sensor field Operating the appliance Using the automatic warm up function All cooking zones are equpped with an automatic warm up function When set ting a heat setting using A when starting from B the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set Control possible heat Display panel settings Switch on Touch Cto 8 A after 5 seconds only when starting at Switch off Touch to to Not used Touch 3 to 3 to i If there is still residual heat on the cooking zone display H the automatic warm up is not performed The length of time that the automatic warm up function operates depends on the heat setting selected Length of the Intermedi Length of the automatic warm up ate heat automatic warm up min sec setting min sec u 0 30 i 1 00 2 1 40 Z 2 40 3 4 50 3 5 30 4 6 30 a 8 10 5 10 10 5 12 20 5 2 00 5 2 30 1 3 30 8 4 30 g xY Operating the appliance Using the child safety device The child safety device prevents unintentional use of the appliance Switching on the child safety device Control panel Display Signal 1 Switch on appliance Do n
6. slowly The time is set The time counts down Operating the appliance Displaying the time remaining for a cooking zone Control panel field DIEM 1 TIMER Select cooking Pilot light of the cooking zone selected zone flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly Switching off the acoustic signal Control panel field Acoustic signal T Touch TIMER Acoustic signal to acknowledge Acoustic signal stops Operating the appliance Automatic switch off Cooking surface e f after switching on the cooking surface a heat setting is not set for a cook ing zone within approx 10 seconds the cooking surface automatically switch es itself off e f one or more sensor fields are covered by objects a pan cloths etc for longer than approx 10 seconds a signal sounds and the cooking surface switches off automatically e f all cooking zones are switched off the cooking surface automatically switches itself off after approx 10 seconds Cooking zones e f one of the cooking zones is not switched off after a certain time or if the heat setting is not modified the relevant cooking zone switches off automati cally is displayed Before being used again the cooking zone must be set to m Heat setting Switches off after u Mag 6 hours 3 4 5 hours 5 4 hours 6 3 1 5 hours Tips on Cooking and Frying Tips on Cooking and Frying i Information on acr
7. 66301K MN User Manual Notice d utilisation Gebruiksaanwijzing Ceramic glass hob Table de cuisson vitroc ramique Glaskeramische kookplaat En D Dear Customer Thank you for choosing one of our high quality products With this appliance you will experience the perfect combination of functional design and cutting edge technology Convince yourself that our appliances are engineered to deliver the best per formance and control indeed we are setting the highest standards of excel lence In addition to this you find environmental and energy saving aspects as an inte gral part of our products To ensure optimal and regular performance of your appliance please read this instruction manual carefully It will enable you to navigate all processes perfect ly and most efficiently To refer to this manual any time you need to we recommend you to keep it in a safe place And please pass it to any future owner of the appliance We wish you much joy with your new appliance The following symbols are used in this user information Warning This must be read Important advice for the safety of persons and information on avoiding damage to the appliance General information and advice Information on environmental protection Dangerous voltage Contents Operating Instructions 4 Safety instructions 4 Description of the Appliance 6 Cooking surface layout 6 Control panel layout 6 Touch Con
8. amp on cable e In the event of single phase or two phase connection the appropriate mains cable of type HO5BB F Tmax 90 C or higher must be used e If this appliance s mains cable is damaged it must be replaced by a special ca ble type HOSBB F Tmax 90 C or higher The latter is available from the Cus tomer Care Department A device must be provided in the electrical installation which allows the appli ance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut outs fuses screw type fus es are to be removed from the holder earth leakage trips and contactors Service Service In the event of technical faults please first check whether you can remedy the problem yourself with the help of the operating instructions section What to do if If you were not able to remedy the problem yourself please contact the Cus tomer Care Department or one of our service partners In order to be able to assist you quickly we require the following information Model description Product number PNC Serial number S No for numbers see rating plate Type of fault Any error messages displayed by the ap pliance three digit letter number combination for glass ceramic So that you have the necessary reference numbers from your appliance at hand we recommend that you write them in here
9. ax 905 829 3985 www euro line appliances com Assembly Montage Montage Assembly Montage Montage aT min 500 mm HED Assembly Montage Montage
10. ble liquids highly inflammable materials or fusi ble objects e g plastic film plastic aluminium on or near the appliance Children s safety e Small children must be kept away from the appliance e Only let bigger children work on the appliance under supervision e To avoid small children and pets unintentionally switching the appliance on we recommend activation of the child safety device General safety e The appliance may only be installed and connected by trained registered service engineers e Built in appliances may only be used after they have built in to suitable built in units and work surfaces that meet standards e In the event of faults with the appliance or damage to the glass ceramic cracks scratches or splits the appliance must be switched off and discon nected from the electrical supply to prevent the possibility of an electric shock e Repairs to the appliance must only be carried out by trained registered service engineers Safety instructions Safety during use Overheated fats and oils can ignite very quickly Warning Fire hazard e There is the risk of burns from the appliance if used carelessly e Remove stickers and film from the glass ceramic e Cables from electrical appliances must not touch the hot surface of the appli ance or hot cookware e Switch the cooking zones off after each use Safety when cleaning e For cleaning the appliance must be switched off and cooled down
11. d acoustic signals Touch the sensor fields from above without covering other sensor fields Sensor field On Off To switch the appliance on and off Increase settings To increase heat settings Reduce settings To reduce heat settings TIMER Timer Timer selection Increase settings To increase Timer time B Reduce settings To reduce Timer time STOP GO Stop Go To switch the Keep Warm setting on off Triple ring switch To switch outer rings on and off Multi purpose zone switch To switch the outside ring on and off BEM Description of the Appliance Displays 0 Cooking zone is switched off Keep warm setting Keep warm setting STOP GO function is set C 3 Heat settings Heat setting is set Heating setting plus Intermediate heat setting is set decimal point A Automatic warm up func Automatic warm up function is acti tion vated Fault Malfunction has occurred Residual heat Cooking zone is still hot Child safety device Lock child safety device is engaged B Automatic switch off Switch off is active Residual heat indicator A Warning Risk of burns from residual heat After being switched off the cook ing zones need some time to cool down Look at the residual heat indicator HJ i Residual heat can be used for melting and keeping food warm Operating the appliance BK Operating the appliance Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 secon
12. d as rice stir 2 3 ing on low 25 50 mins ey Heating up ready cooked milk dishes part way heat meals through cooking A s With vegetables add only 3 4 onn dope fish 20 45 mins a little liquid a few raising braising meat tablespoons Use only a little liquid e Steaming potatoes 20 60 mins g max 1 4 water for 4 5 Boiling 750 g potatoes Cooking larger quantities of 60 150 mins Up to3 liquid plus food stews and soups ingredients Frying escalopes veal cor 6 7 Gentle don bleu cutlets rissoles Steady frying Turn halfway through Frying sausages liver roux eggs cooking pancakes doughnuts Hash browns loin steaks 7 8 ee steaks Fladle pancakes for rae a it ASE ang garnishing soup PERR 9 Boiling 9 Searing Boiling large quantities of water cooking pasta searing meat goulash Deep pot roast deep frying chips frying Cleaning and Care BE Cleaning and Care A Take care Risk of burns from residual heat A Warning Sharp objects and abrasive cleaning materials will damage the appli ance Clean with water and washing up liquid A Warning Residues from cleaning agents will damage the appliance Remove residues with water and washing up liquid Cleaning the appliance after each use 1 Wipe the appliance with a damp cloth and a little washing up liquid 2 Rub the appliance dry using a clean cloth Removing deposits 1 Place a scraper on the glass ceramic surface at an angle 2 Remove residues by
13. ds 0 lights up Switch off Touch D for 1 second H none goes out i After switching on within approx 10 seconds a heat setting or a function must be set otherwise the appliance automatically switches itself off Setting the heat setting ET To increase Touch to 5 To decrease Touch to To switch off Touch A and M at the same time 0 i The keep warm setting uJ lies between 8 and 1 It is used to keep food warm HOW Operating the appliance Switching the outside ring on and off By switching the outside rings on or off the effective heating surface can be matched to the size of the cookware i Before an outside ring can be switched on the inside ring must be switched on Triple cooking zone Sensor panel Power indicator To switch on middle ring Touch for 1 2 seconds One power indicator is lit To switch on outside ring Touch for 1 2 seconds Two power indicators are lit To switch off outside ring Touch for 1 2 seconds second es one To switch off middle ring Touch for 1 2 seconds First power indicator goes out Roasting zone Sensor panel Power indicator To switch on outside ring Touch for 1 2 seconds is lit To switch off outside ring Touch for 1 2 seconds goes out Switching the STOP GO function on and off The STOP GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set
14. ion set is also switched off Selecting a cooking zone Control panel DS EN 1 Touch TIMER once Pilot light of the first cooking zone flashes 9 ud 2 Touch TIMER once Pilot light of the second a e cooking zone flashes 00 3 Touch TIMER once Pilot light of the third A e cooking zone flashes 00 4 Touch TIMER once Pilot light of the fourth cooking zone flashes 08 e If the pilot light is flashing more slowly the heat setting can be set or modified If other timer functions are set after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes Operating the appliance Setting the time Step Control pane il Select TIMER cooking Pilot light for the cooking zone selected zone flashes 2 Touch or GG to 39 minutes After a few seconds the pilot light flashes more slowly The time is set The time counts down Switching off the timer function Step Control pane ie Select TIMER cooking Pilot light of cooking zone selected zone flashes faster Time remaining is displayed 2 Touch The time remaining counts backwards to The pilot light goes out The Timer function for the selected cooking zone is switched off Changing the time Step Control pane 1 Select TIMER cooking Pilot light of the selected cooking zone zone flashes faster Time remaining is displayed 2 Touch or E G ito 39 minutes After a few seconds the pilot light flashes more
15. les or if the travel time is in excess of 30 minutes from the nearest service center Any excess to this will not be covered by the warranty On RW gt In no event will Euro Line be responsible for incidental or consequential damages For warranty service and parts contact EURO PARTS Service will be provided during normal business hours Should you have a service problem that is not resolved locally contact For Service and Parts Contact 35 36 EURO PARTS USA EURO PARTS CANADA EURO LINE APPLIANCES Tel 1 800 561 4614 Tel 1 800 678 8352 1 800 421 6332 Fax 1 519 528 5001 Fax 1 519 528 5001 Tel Direct 1 905 829 3980 Fax 1 905 829 3985 User Instructions amp Installation Manual Service amp Repair To save you time and money please have the following information ready in case you have to call for service e Name of the dealer from whom you purchased the appliance e Model number shown on the rating plate e Serial number shown on the rating plate e Date of purchase You should also retain the original purchase receipt to support any claim made under the warranty We suggest you staple the receipt to this page If service is required contact the Service Center EURO PARTS CANADA EURO PARTS USA Tel 1 800 678 8352 Tel 1 800 561 4614 Fax 1 519 528 500 Fax 1 519 528 5001 DISTRIBUTED BY EURO LINE APPLIANCES 2278 SPEERS ROAD OAKVILLE ONTARIO CANADA L6L 2X8 1 800 421 6332 Tel 905 829 3980 F
16. ot set heat setting 2 Touch stop Go for 4 seconds The child safety device is switched on Switching off the child safety device Control panel SEN MIE 1 Switch on appliance Do not set heat setting 2 Touch STOP G0 for 4 seconds lights up 3 Switch appliance off The child safety device is switched off i The child safety device can only be switched on and off if no heat setting is set Overriding the child safety device The child safety device can be switched off in this way for a single cooking ses sion it remains activated afterwards Control panel SEN MI HEL 1 Switch appliance on 2 Touch stoP Go for 4 seconds lights up Until the appliance is next switched off it can used as normal After switching off the appliance the child safety device is active again i After overriding the child safety device a heat setting or a function must be set within approx 10 seconds otherwise the appliance automatically switches itself off Operating the appliance Using the timer mic Function Condition Outcome after the time has elapsed Automatic cut out a heat setting is set acoustic signal GU flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal GU flashes If a heat setting is set on this cooking zone in addition to a countdown timer the cooking zone is switched off after the time set has elapsed If a cooking zone is switched off the timer funct
17. remedy the problem by following the above sugges tions please contact your local Service Force Centre Warning Repairs to the appliance are only to be carried out by qualified service engineers Considerable danger to the user may result from improper repairs If the appliance has been operated incorrectly the engineer s visit will be chargeable even during the warranty period Disposal Disposal Q Packaging material The packaging materials are environmentally friendly and can be recycled The plastic components are identified by markings e g gt PE lt gt PS lt etc Please dis pose of the packaging materials in the appropriate container at the community waste disposal facilities Old appliance The symbol K on the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equip ment By ensuring this product is disposed of correctly you will help prevent po tential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product Installation Instructions Installation Instructions A Safety instructions
18. sliding the blade over the surface 3 Wipe the appliance with a damp cloth and a little washing up liquid 4 Rub the appliance dry using a clean cloth Remove A when the appliance has Type onair cooled down sugar food containing sugar yes a scraper plastics tin foil yes limescale and water rings yes cleaner for glass ceram fat splashes yes E ic or stainless steel shiny metallic discolouration yes Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops Remove stubborn residues with a cleaner for glass ceramic or stainless steel i Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance What to do if What to do if The cooking zones will not switch on or are not function ing Acoustic signal sounds when appliance is switched off The residual heat indicator is not displaying anything The automatic warm up func tion is not switching itself on Acoustic signal sounds and appliance switches itself on and then off again after 5 seconds another acoustic sig nal sounds is lit More than 10 seconds have passed since the appliance was switched on The child safety device is switched on Several sensor fields were touched at the same time Automatic switch off has been triggered STOP GO is activated The control panel is wholly or partly covered by objects
19. trol sensor fields 7 Displays 8 Residual heat indicator 8 Operating the appliance 9 Switching the appliance on and off 9 Setting the heat setting 9 Switching the outside ring on and off 10 Switching the STOP GO function on and off 10 Using the automatic warm up function 11 Using the child safety device 12 Using the timer 13 Automatic switch off 16 Tips on Cooking and Frying 17 Cookware 17 Energy saving 17 Examples of cooking applications 18 Cleaning and Care 19 What to do if 20 Disposal 22 Installation Instructions 23 Safety instructions 23 Guarantee Customer Service 24 Service 25 Assembly 78 Rating Plate 81 Operating Instructions Operating Instructions A Safety instructions Please comply with these instructions If you do not any damage resulting is not covered by the warranty Correct use e This appliance is not intended for use by children or other persons whose physical sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruc tion by a responsible person to ensure that they can use the appliance safely e Do not leave the appliance unattended during operation e This appliance should be used only for normal domestic cooking and frying of food e The appliance must not be used as a work surface or as a storage surface e Additions or modifications to the appliance are not permitted e Do not place or store flamma
20. ylamides According to the latest scientific knowledge intensive browning of food espe cially in products containing starch can constitute a health risk due to acryla mides Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much Cookware e You can recognise good cookware from the bottoms of the pans The bottom should be as thick and flat as possible e Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolorations on the glass ceramic surface which are difficult or impos sible to remove Energy saving ws Always place cookware on the cooking zone before it is switched on T ws If possible always place lids on the pans i X y a ws Switch cooking zones off before the end of the cooking time to take advantage of re sidual heat ws Bottom of pans and cooking zones should be the same size 4 4 Tips on Cooking and Frying Examples of cooking applications The information given in the following table is for guidance only Heat Cooking Cooking ae ped Beals 0 Residual heat Off position u en Keeping cooked foods warm as required Cover Hollandaise sauce Melting melting butter chocolate 5 25 mins Stir occasionally 1 2 gelatine Solidifying Fluffy omelettes baked eggs 10 40 mins Cook with lid on Si Simmering rice and milk Add at least twice as immer a f based dishes much liqui
Download Pdf Manuals
Related Search