Home

ESC-4

1. 4 2 Setup Setup Troubleshooting Please confirm followings when the ESC 4 does not work Symptoms and Actions The chassis won t be turned on a Make sure that the power cable has been connected correctly b Make sure that the LED is turned on c Make sure that the power supply of this product is on d Make sure that you have followed the procedure in Chapter 2 e Even though the chassis is still not turned on check whether it is turned on with no board installed No PCI board on this product is detected f Make sure that the signal conditioner has been installed correctly g Make sure that the connection cable has been installed correctly When connecting the connection cable to the main chassis insert the connector until it clicks into place h Make sure that the POWER LED on this product is turned on a c h f CONTEC ESC 4 15 2 Setup CONTEC 16 ESC 4 3 About Hardware 3 About Hardware Hardware specification Table 3 1 Specification Item Specification Number of user available slots 4 Power capacity Max 5VDC 12A AC input line voltage 100 240VAC Input freguency 50 60Hz Inrush current 25A Peak 100VAC 50A Peak 200VAC Physical dimensions mm 242 W x 262 D x 115 H No protrusions Weight 3000g Table 3 2 Environmental specification Item Specification Operating temperature 0 50 C Operating humidity 20 80 RH No condensation
2. a Return Merchandise Authorization number RMA from the CONTEC group office where you purchased before returning any product No product will be accepted by CONTEC group without the RMA number Liability The obligation of the warrantor is solely to repair or replace the product In no event will the warrantor be liable for any incidental or conseguential damages due to such defect or conseguences that arise from Safety Precautions Understand the following definitions and precautions to use the product safely CONTEC 2 ESC 4 1 Before Using the Product Safety Precautions Understand the following definitions and precautions to use the product safely Safety Information This document provides safety information using the following symbols to prevent accidents resulting in injury or death and the destruction of equipment and resources Understand the meanings of these labels to operate the equipment safely A DANGER DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury A WARNING WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury A CAUTION CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury or in property damage Handling Precautions ZN DANGER Do not use the product where it is exposed to flammable or corrosive gas Do
3. the preparation of this document Should you notice an omission or any questionable item in this document please feel free to notify CONTEC CO LTD Regardless of the foregoing statement CONTEC assumes no responsibility for any errors that may appear in this document or for results obtained by the user as a result of using this product Trademarks MS Microsoft and Windows are trademarks of Microsoft Corporation Other brand and product names are trademarks of their respective holder CONTEC iv ESC 4 Table of Contents Check Your Package COPIER 44 ra ae SEERE ENE RESAN EIEE E GER i Trademarks eee AN iv Table Of Contents eni i Bei es tau E E A AR AA v 1 BEFORE USING THE PRODUCT 1 About the Chassis rss inant r 1 Features siiccci ar Signal conversion board Option ccesessseseseeseeseseeeeseeeesceeeseeseseeseseeseeeaceeeaceecaeeesseeseaeeeeeeaeerees 1 Customer Supportes ssccvsssvecescaidanshiyeencccdeduaisssiwenedcasddaiseseenserdscsuessoveeneeececduaspubucencecssdeenaeoceusercecdyaeaapeceenecedis 2 Web Site Limited One ear WATTANLY i20 Nr 2 How to Obtains Service session 2 Loi DALY si sccdigecsiiesebescetisacseveseascis na 2 Safety PIECAM OD isc secs NO NA AS TKA i 3 Safety Informatio iesene oinnia iis REKE NT 3 Handling Precaution Senra nra EAE AEREE 3 Environment iiare sadne 5 InSPOCHOTV Skl r SN NA NI ENES ESS EP PORTA EUSTON Tea SEERE 5 SO I APEE nl a 5 IDTE oa T AAR EEEE EEEE ees acess
4. PC HELPER Signal Conditioner 4 Slots ESC 4 User s Manual CONTEC CO LTD Check Your Package Thank you for purchasing the CONTEC product The product consists of the items listed below Check with the following list that your package is complete If you discover damaged or missing items contact your retailer Product Configuration List External Signal Conditioner 1 Attachment fittings 2 Brackets for front slots 3 Serews for attachment fittings 4 Brackets for rear slots 3 Rubber feet 4 Screws for securing front or rear bracket 12 Screws for attaching rubber feet 4 Power cable for 125V 1 User s Manual 1 Clamp for fixing AC cable 1 Screws for securing front or rear bracket External Signal Conditioner Brackets Brackets Power cable g for front for rear Screws for Screws for attaching slots slots attachment fittings rubber feet Clamp for fixing Attachment Rubber feet AC cable fittings User s Manual CONTEC ESC 4 iii Copyright Copyright 2009 CONTEC CO LTD ALL RIGHTS RESERVED No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO LTD CONTEC CO LTD makes no commitment to update or keep current the information contained in this document The information in this document is subject to change without notice All relevant issues have been considered in
5. Storage humidity 10 90 RH No condensation Floating dust particles Not to be excessive Storage temperature 0 60 C MA CAUTION The power supply and cooling fan in the ESC 4 is consumable requiring replacement after use for a certain period of time Although each of the parts should be replaced after use for the following period of time in principle the life may be shortened depending on the operating environment Keep in mind that the lives of the parts may be extremely shortened if they are used where it is either exposed to must dirt metal chips or particles or dust or affected by oil or corrosive gas Power supply About 5 years in an office environment kept at a temperature of 25 C and a humidity of 60 Fan About 5 years in an office environment kept at a temperature of 25 C and a humidity of 60 CONTEC ESC 4 17 3 About Hardware Physical dimensions A CAUTION When using this product keep it at least 20mm away from any object such as the wall for cooling purposes Attaching rubber feet to the chassis makes it 8mm taller 73 MM3 fa Maximum tapping SI length 5mm 9 91 364 a 216 Sly l akg l Tumm 41077 j 000000000000 ren s i 1000000001111 U01 e
6. be prevented by securing it with the clamp for fixing AC cable that can be attached to the hole beside the cable connector CAUTION Otherwise this Make sure that the power switch is OFF before connecting the power cable product may malfunction or cause a failure 12 CONTEC ESC 4 2 Setup Fixing the Power Cable Clamp for fixing AC cable is bundled with this product 1 Attach the tip of clamp for fixing AC cable to the hole above the AC inlet Figure 2 7 Attaching the clamp for fixing AC cable lt 1 3 gt 2 Apply the clamp for fixing AC cable to the power cable Figure 2 7 Attaching the clamp for fixing AC cable lt 2 3 gt 3 Move the clamp for fixing AC cable as close to the AC inlet as possible then tighten the clamp to fasten the power cable Figure 2 7 Attaching the clamp for fixing AC cable lt 3 3 gt CONTEC ESC 4 13 2 Setup How to Attach the Rubber Feet 1 Attach the rubber feet to the bottom side of this product by using screws if necessary Figure 2 8 Attaching the rubber feet How to Attach the Attachment Fittings 1 The attachment fittings should be attached as shown below Attachment fittings a Screws for attachment fittings Figure 2 9 Attach the Attachment Fittings MA CAUTION Rubber feet and attachment fitting are mutually exclusive Use either of them at a time depending on the operating condition CONTEC 14 ESC
7. e the chassis near equipment generating a strong magnetic field or noise Doing so may result in a malfunction overheating fault or damage in the chassis your PC or both Itis very dangerous to use this product with water liquid or metal conductive chips left inside Be careful not to let such foreign matters in this product The specifications of this product are subject to change without notice for enhancement or quality improvement Even when using the product continuously be sure to read the manual and understand the contents Do not modify this product CONTEC will bear no responsibility for any problems etc resulting from modifying the product Regardless of the foregoing statements CONTEC is not liable for any damages whatsoever including damages for loss of business profits arising out of the use of or inability to use this CONTEC product or the information contained herein CONTEC 4 ESC 4 Environment Use this product in the following environment may overheat malfunction or cause a failure Operating temperature 0 50 C Humidity 20 80 RH No condensation Corrosive gases None Floating dust particles Not to be excessive Inspection 1 Before Using the Product If used in an unauthorized environment the chassis Inspect the product periodically as follows to use it safely Ventilating slits must neither be blocked nor have dust or foreign matters adhering Sto
8. ea eee EE eae eee 5 2 SETUP 7 What is Setup L N LLL SERENE SESTERERETERES T Steps Preparaat aor v 8 Itemsto be prepared secioni n ee E VE E E A 8 Na miesrof major parts iso ALA 9 Step 2 Installing the Signal Conditioner o onoorononnononnonnononnnnnn nn nn 10 Step 3 Attaching the bracket power cable etc cccecceesseseseeseseeseseeeeseeseseeseeeeaeeeaeeesseeesaeeeaeeeeaeeeees 11 Attaching the bracket to the empty Slt ccsccesceessesseeeseeeeseeeeseeeeseeeeseeseseeeeseeaceesaeeecaeereaeeeeaeeas 11 Connecting the power cable with this product ccccsseeseeeeseeeeseeeeeeeeseeseseeceseeseeeseeeeaeeeeseeneaeees 12 Fixing the Power Cables zis How to Attach the Rubber Feet How to Attach the Attachment Fittings 2 0 0 ccseesseseseeseseeseeeseeeseeeseeecseeeeseeesesseeesseeeeaeeeeaeees 14 Setup Troubleshooting ss otsa LL Liv 15 Symptoms and Actions mo eaor EE S aE Ea SN AE ES A E Eases 15 3 ABOUT HARDWARE 17 Hatdware Specification semene ona e stores ua 17 CONTEC ESC 4 v Physical dimensions st na 18 CONTEC ESC 4 1 Before Using the Product 1 Before Using the Product This chapter provides information you should know before using the product About the Chassis This product is a box that can contain up to 4 signal conditioner signal conversion boards The signal conversion boards can be inserted through the slot in system for effortless attachment or replacement and easy maintenance Var
9. ing so may result in an explosion fire electric shock or failure MA CAUTION Do not plug or unplug any board into or from the slot with this product powered Doing so may result in a malfunction overheating or fault Be sure to turn off this product and unplug their power cables before plugging or unplugging any board Do not plug or unplug the cable interconnecting this product with this product powered This product must always be used standing horizontally Doing so may result in a malfunction overheating or fault If a specific slot is recommended for a board plug the board into that slot Failure to do so may result in a malfunction overheating fault or damage When plugging or unplugging the power cable be sure to hold it by the plug itself The power cable used must be compliant to the outlet voltage and plug type The attached cable is for 125VAC Since this product is a precision device do not store or use it where it is subject to shock or vibration Also avoid any place where this product is exposed to direct sunlight extremely high humidity or much dust Do not use or store the chassis where it is exposed to any chemical either directly or as vapor in the air This product has ventilating slits to prevent it from overheating Avoid using the chassis with the ventilating slits blocked or in an ill ventilated place CONTEC ESC 4 3 1 Before Using the Product Do not us
10. ious feature enhancements can be achieved by adding or replacing signal conversion boards which are separately available For example SC AIO1604G unifies the channels by changing the I O range and or other things for each of them and SC DIO2424S enables switching sync source by 8 points according to the signal source allowing a measurement using one board Features Max four signal conversion boards can be connected You can connect Max four signal conversion boards SC AIO16 4G SC DIO24245 Slot in system facilitating connection of a signal conversion board This product uses the slot in system that makes it easier to connect a signal conversion board without opening the cover of cabinet Easy maintenance by smooth connection and conversion Various feature enhancements can be achieved by replacing signal conversion boards By adding or replacing the signal conversion board s various feature enhancements according to your needs are possible Signal conversion board Option Signal conversion board for analog I O SC AIO1604G Signal conversion board for digital I O SC DIO2424S Check the CONTEC s Web site for more information on these signal conversion board CONTEC ESC 4 1 1 Before Using the Product Customer Support CONTEC provides the following support services for you to use CONTEC products more efficiently and comfortably Web Site Japanese _http www contec co jp English http ww
11. l Skel i NO S s S K I mwi S 000tl 00101000110 1001000111101 H zoom TA X i noi ga Wh 2 W 242 IMA 4M4 KER Maximum tapping Maximum tapping Maximum tapping ength 5mm Ii length 5mm length 5mm s fer Noms pe Maximum tapping p length 5mm mm Figure 3 1 Physical dimensions CONTEC ESC 4 18 ESC 4 User s Manual CONTEC CO LTD March 2009 Edition 3 9 31 Himesato Nishiyodogawa ku Osaka 555 0025 Japan Japanese http www contec co jp English http www contec com Chinese http www contec com cn No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO LTD 03172009 01292009 Management No A 51 647 03172009 rev2 Parts No LYKB582
12. rage When storing this product keep it in its original packing form 1 Wrap it in the packing material then put it in the box 2 Store the package at room temperature at a place free from direct sunlight moisture shock vibration magnetism and static electricity Disposal When disposing of the product follow the disposal procedures stipulated under the relevant laws and municipal ordinances CONTEC ESC 4 1 Before Using the Product CONTEC 6 ESC 4 2 Setup 2 Setup This chapter explains how to set up the chassis Refer to the user s manual for the signal conditioner as required What is Setup Setup means a series of steps to take before the product can be used Taking the following steps in this chapter sets up the ESC 4 Step 1 Preparation Step 2 Installing the Signal Conditioner Step 3 Attaching the bracket power cable etc CONTEC ESC 4 7 2 Setup Step 1 Preparation Configuration image Figure 2 1 Configuration image Items to be prepared ESC 4 This product a Brackets for front slots b Brackets for rear slots c Signal Conditioner d The photo is of the SC DIO2424S SC AIO1604G SC DIO2424S a d c b CONTEC 8 ESC 4 2 Setup Names of major parts Front view Power LED Slot 4 Slots Back view Board supporting Power Switch Hole to attach the clamp for fixing AC power cable Figure 2 2 Name
13. s of major parts CONTEC ESC 4 9 2 Setup Step 2 Installing the Signal Conditioner MA CAUTION Before installing the signal conditioner on this product be sure to turn off this product and unplug the power cables from wall outlets at the same time There are switches and jumpers on the signal conditioner that need to be set in advance Be sure to check these before installing this product Follow the procedure below to install the signal conditioner on this product 1 Unplug the power cable from this product 2 Remove the screws fixing the bracket on front back side and then remove the bracket 3 Insert the board to one of the slots The slot has the lane along which the board must be slid in 4 Fix the front back side of board with screws Figure 2 3 Installing the Signal Conditioner CONTEC 10 ESC 4 2 Setup Step 3 Attaching the bracket power cable etc Attaching the bracket to the empty slot Figure 2 4 Attaching the brackets for front slots Figure 2 5 Attaching the brackets for rear slots MA CAUTION Make sure that all the unused slot s are fitted with the bracket s CONTEC ESC 4 11 2 Setup Connecting the power cable with this product 1 Connect this product with the power cable Figure 2 6 Connecting the power cable with this product 2 Connect the power cable to the wall outlet 3 Accidental removal of the AC cable can
14. w contec com Chinese http www contec com cn Latest product information CONTEC provides up to date information on products CONTEC also provides product manuals and various technical documents in the PDF Free download You can download updated driver software and differential files as well as sample programs available in several languages Note For product information Contact your retailer if you have any technical guestion about a CONTEC product or need its price delivery time or estimate information Limited One Year Warranty CONTEC products are warranted by CONTEC CO LTD to be free from defects in material and workmanship for up to one year from the date of purchase by the original purchaser Repair will be free of charge only when this device is returned freight prepaid with a copy of the original invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office from which it was purchased This warranty is not applicable for scratches or normal wear but only for the electronic circuitry and original products The warranty is not applicable if the device has been tampered with or damaged through abuse mistreatment neglect or unreasonable use or if the original invoice is not included in which case repairs will be considered beyond the warranty policy How to Obtain Service For replacement or repair return the device freight prepaid with a copy of the original invoice Please obtain

ESC-4

Contents

Download Pdf Manuals

Related Search

Related Contents