nLight - JRC - The Lighting Solutions Company
Contents
1. Port 2 zone name of devices Port 6 zone name of devices Port 3 zone name of devices Port 7 zone name of devices Port 4 zone name of devices Port 8 zone name of devices ADDITIONAL SPACE ON OTHER SIDE IF NEEDED 900 Northrop Road Wallingford CT 06492 1 800 PASSIVE FX 203 269 9621 www sensorswitch com PROJECT INSTALLATION licut BRIDGE SERIAL Port 1 zone name 0 of devices Port 5 zone name of devices Port 2 zone name of devices Port 6 zone name of devices Port 3 zone name of devices Port 7 zone name ______ of devices Port 4zone name 0808080802 fFofdevices 0 Port 8 zone name of devices ADDITIONAL SPACE ON OTHER SIDE IF NEEDED 900 Northrop Road Wallingford CT 06492 1 800 PASSIVE FX 203 269 9621 www sensorswitch com nSTARTUP Request Form Details Must be completed and returned to controls jrclight com prior to a startup being scheduled Please see below for details Fill out project information fields located at the top of Page Special Requirements Complete section and provide additional information for special requirements not listed nLIGHT System Training Contact e Complete section and provide contact information for person s responsible for coordinating onsite training and p2. Installation amp Start up Documentation for nLight Network Lighting Control System Contents e nLight system Checklist nLight Control System Installation Worksheet e nLight Project Installation Forms e nSTARTUP Request Forms Prior to startup please complete the following REQUIRED ITEMS JOB NAME LOCATION REQUESTED STARTUP DATE nGWY Serial Number eEvery nLight device with RJ 45 ports has 2 Device ID Stickers one of which is removable the other stays on the device The removable stickers will be used to keep track nLight components location ePlace the removable Device ID sticker s on the front of the Gateways s If multiple Gateways are being used on the project please provide the ID sticker and information for each Gateway Device count reported by Gateway on LCD screen eThe LCD screen of the Gateway displays the of devices the Gateway is communicating with The number of devices on a Gateways LCD screen should match the total of devices connected to that Gateway e All devices that have RJ 45 ports are counted devices that do not have RJ 45 ports Bridge and Gateway power supplies are not counted eFor example if the first floor of a building has been installed with 250 nLight devices but the LCD screen of the Gateway has only discovered 110 devices there is a breakdown in communication somewhere in the network and further troubleshooting is required If assistance is needed please contact JRC Cont
3. LED s e Confirm that all powered devices in use have an active LED Please note capacitive touch wall controls and devices that do not have RJ 45 ports do not have LED s elf a device s LED exhibits a rapid flash double blink behavior this indicates a communication error in the zone To troubleshoot locate the middle of the CAT 5 chain for the zone and disconnect the RJ45 on that device If the error blink code persists repeat the process on the half of the chain where the device in question resides Repeat the process until the device or cable segment causing the error is isolated Repair or replace as necesary until all error blink codes are eliminated On Off Control has been verified elf applicable verify all On Off control throughout installation Field programming is not required for basic On Off controls to function This includes manual On Off functions via wall control and On Off controls via sensor control elf applicable all nLight enabled fixtures in each zone will operate together in tandem initially if zones are requred by the specifier s design to have switching groups or occupancy tracking groups defined this will be accomplished through programming Dimming Control has been verified elf applicable verify manual dimming functionality throughout installation Field programming is not required for basic ON OFF and manual dimming controls to function elf applicable all nLight enabled fixtures in
4. e instruction cards included in boxes for more information www sensorswitch com nlight docs Fill out the table below to verify proper Bridge and Gateway Installation Entire Section MUST be filled out Signature of Installer X nGWY Serial Number Device count reported by Gateway on LCD screen witha LAN cable tester amp On Off Control has been verified Dimming Control has All Devices in use have been verified Number of downstream active LEDs Every Network CAT 5 cable has been tested Ethernet connection Gateway has a valid Link Up Comments Location i e 1st Floor 900 Northrop Road Wallingford CT 06492 1 800 PASSIVE FX 203 269 9621 www sensorswitch com of Page Comments Location i e 1st Floor Signature of Installer uono uuoo y us q 4 pijen e sey Aemajey Date POIJLIDA u q sey 01110 Burwwig P HH A u q sey 01409 HO UO 5031 An e BABY esn UI SIVIADG IV passed 9 19 S9 lqe NV E ulu u q seu G 1VD YHOM N Along sabpug WealJSUMOP JOqUINN u i15s 17 uo Aemajyey Aq papodal junod 29119g nLIGHT System Installation Worksheet cont Project name www sensorswitch com FX 203 269 9621 1 800 PASSIVE 900 Northrop Road Wallingford CT 06492 ALicHT Port 1 zone name PROJECT INSTALLATION BRIDGE SERIAL of devices Port 5 zone name of devices
5. each zone will operate together in tandem initially if zones are requred by the specifier s design to have dimming groups or daylight tracking groups defined this will be accomplished through programming Gateway has a valid Ethernet connection Link up elf applicable verify each network Gateway has its own dedicated Ethernet connection When properly terminated and connected to an Ethernet source the LCD screen will display a GREEN CHAIN LINK icon on the right side of the touchscreen if a valid Ethernet connection is connected and active Comments elf applicable provide additional information about Gatevvay i e floor location vving Project Installation Form Details e Must be completed and returned to controls jrclight com prior to a startup being scheduled Please see below for details of Project Installation Forms filled out should equal the of Bridges installed on a project Copy of form also included in box Bridge is shipped in Bridge Serial Place the removable Device ID sticker for the Bridge in the space provided If multiple Bridges are being used on the project please provide the ID sticker and information for each Bridge on separate Project Installation Forms Port zone name Write the zone name in space provided i e Room 101 Main Lobby e Please indicate if the port on the Bridge is not being used i e Spare Not Used Please indicate if the port on the Bridge is connected to an
6. ilar devices include slave relay packs nSP auxiliary relay packs nAR40 and power supplies nPS e Bridge A device used to hub several zones together Each Bridge nBRG connects to one or more other Bridges or a single Gateway to form a communication backbone Bridges also supply power to downstream zones that do not have an nPP16 power pack e Gateway The device in an nLight network that connects the network of sensors power packs WallPods and Bridges to the building s Ethernet Requires a network drop similar to a network printer Model number nGWY CAT 5 Wiring Requirements RJ 45 Male Terminations T568B 1500 ft max cable length per zone Notice It is imperative that all CAT 5 cables be tested with a LAN Cable Tester to verify proper RJ 45 terminations Control Verification Methods Listed below are methods of testing a zone for proper electrical control of the lights Check all wiring connections if test fails Method 1 requires WallPod Toggle lights On Off or dim lights Up Down by pressing WallPod Method 2 requires Occupancy Sensor Vacate zone and wait for occupancy sensor to time out Default time delay is 10 minutes Note sound will reset time delay on dual technology PDT sensors Method 3 requires Photocell Shine flashlight into Photocell LED will blink rapidly and lights will begin to dim After 20 min of blinking lights will turn off e Notice Product LEDs provide status information Refer to individual devic
7. ost computer must be on site and meet the minimum operation specifications Verify discovery of all network devices by SensorView software Set up user accounts Customize network device labels if supplied Edit default operation Perform any necessary firmware updates Create Profiles amp Schedules Print Inventory and Network reports Perform system backup 1 2 day of training of network administrator or facility management personnel on basic operation Additional training time or follow up training visits can be purchased separately Prior to arrival a list of all attendees for training must be provided to startup Technician e Refunds for unused days not given if startup tasks requires less than maximum number of days quoted TRAINING consists of unless otherwise defined by the specifier e One half 1 2 day of follow up instruction by a certified JRC technician during normal business hours Visits must be scheduled two weeks in advance Prior to arrival a list all attendees for training must be provided to startup Technician
8. ot included in the project and start up of SensorView software is required on an OWNER PROVIDED host computer the machine must be supplied and installed prior to technician visit It is not required that host machine be new or dedicated for SensorView but host computer must meet minimum operating specifications as listed in the SensorView Installation Guide Installation Guide and SensorView User Manual are available for download from http www sensorswitch com nlight docs install pdf http www sensorswitch com nlight docs SensorView Manual pdf Please note that SensorView requires that the following Windows components be installed prior to agent visit IIS Internet Information Services NET Framework Installation guide has details on installing these Windows components If static IP addresses are required for use with Gateway devices they must be provided to prior to arrival on site Failure to complete any of these steps may result in postponement of site visit or additional startup days to be billed If a second site visit is reguired full initial daily cost will apply Visit includes a complete system function test as well as basic system operation and maintenance instruction e Depending on network design customer requests and time limitations tasks performed by startup Technician may include the following Verify accuracy of nLight Installation Worksheet Install Sensor View software on user supplied computer a h
9. other Bridge i e to Bridge from Bridge If the space provided is not large enough to fit all of the device ID stickers please use the back of the form or detail the modification made Alternatively place them neatly on the plans and redlines as necessary to show which ID belongs to each device of Devices Record the total of devices device with RJ 45 ports connected to the port PLACE ID STICKER FOR DEVICES ON WORKSHEETS e Place the removable Device ID sticker for ALL of the zones devices in the space provided nLIGHT Control System Installation Worksheet I Date Field Tech Page1of_ Project name Project location Project Contact Person Contact Information To request Startup send completed install form and nStartup Request form to controls jrclight com Common nLight Terminology e nLight Control Zone A group of devices in a room or area that are daisy chained wired together with CAT 5 cabling One end of a zone should be connected to a port on a Bridge The other end should always be left open Devices can be wired in any order Devices within a zone are powered from either an nPP16 power pack or from the Bridge to which it is connected e WallPod A term for any nLight toggle or dimmer switch All WallPods have model numbers that start with nPOD e Power Packs A general term for the nPP16 device that contains both a 16A line switching relay and supplies power to other devices o the CAT 5 cable Sim
10. rols or refer to the nLight Hardware manual for assistance Number of downstream Bridges amp troubleshooting Bridge blink codes ePlease record the total of Bridges connected to each Gateway eEach Port on each Bridge has a green LED These LED s provide feedback for troubleshooting Pressing the button on the Bridge toggles between Activity Mode and Device Count Mode eActivity Mode 1 Blink Port is Polling connected to zone of devices e Activity Mode 2 Blinks Port is wired to an upstream Transceiver Bridge or a Gateway eActivity Mode 3 Blinks Port is wired to a Transciever Bridge further downstream eDevice Count Mode each port blinks in alternating sequence the of devices connected by blinking a two digit number 1st Digit pause 2nd Digit Rapid blinking indicates a zero and if the count is greater than 99 three digits will be blinked in like manner elf a port does not blink or blinks erratically there is a broken or miswired CAT 5 connection ePlease observe and record blink codes for all ports Rectifiy any error codes prior to startup Every Network CAT 5A cable has been tested with a LAN cable tester amp passed ePlease confirm that every CAT 5 Cable has been tested with a LAN cable tester and passed eThe preferred CAT 5 cable pin out for the nLight network is T568B eA TESTED AND CONFIRMED CATS CABLE PLANT IS ABSOLUTELY CRITICAL TO A SUCCESSFUL nLIGHT SYSTEM All devices in use have active
11. rovide the names and titles of individuals attending the training Additional programming information Sequence of operations for all spaces Provide programming information i e Time based schedules events room operation instructions programming requests Gateway IP Addresses Provide IP addresses for Gateways if Applicable For additional support please call 1 801 972 3970 and ask to speak with one of our nLight specialists www jrclight com controls Le hLIGHT nSTARTUP REQUEST Project name Date Project address Date s Requested Time s Requested Note General lead time is 2 weeks upon approval of nSTARTUP request and required Installation Worksheet Please email nSTARTUP Request Form along with Completed nLight Installation Worksheet to controls j rclight com Please see Terms and Conditions for nSTARTUP details Electrical Contractor Company Name Contact Information of EC that will be present during startup Name Phone Email address Special requirements Hard hat P Steel toed boots Safety glasses L Safety vest L Background check L VVorking outside of normal business hours Y N If so what hours are required Other nLight System Training Contact Phone Email address Is the host computer server on premises Y N Does host server meet all Minimum OS requirements Y N Has SensorView software been installed Y N If No who should be contacted to discuss SensorView
12. user manual can be found by visiting http www sensorswitch com nlight docs SensorView_Manual pdf SensorView Installation Instructions and OS requirements can be found in the Appendix Page 1 Trainees Name Title Name Title Name Title Name Title Name Title Name Title Additional programming information Sequence of operation for all spaces If Applicable Gateway IP Addresses 900 Northrop Road Wallingford CT 06492 1 800 PASSIVE FX 203 269 9621 www sensorswitch com JRC nLIGHT STARTUP Terms amp Conditions STARTUP consists of e One on site visit of a predetermined maximum number of consecutive days by a certified JRC technician during normal business hours Visit must be scheduled two weeks in advance nLight Installation Worksheets required prior to scheduling startup visit e Completed nLight Installation Worksheet required prior to scheduling startup visit Worksheet must be completed by electrical contractor Accuracy of worksheet will be verified by startup technician who will not be held responsible for time spent troubleshooting installation errors by electrical contractor JRC reserves the right to back charge the contractor at the current rate per day plus expenses for additional days spent on site troubleshooting installation errors including but not limited to mis wired CAT 5 terminations If a second site visit is required full initial daily cost will apply If a JRC provided nLight Server was n
Download Pdf Manuals
Related Search