Home

ReadyNAS Surveillance Add-on User Manual

1. tha email address of the new contact 4 Click the Add Contact button 5 Cick the Save bution Note The Reset button restores the last saved contact lit Recordings amp Events ReadyNAS Surveillance Add on Boxes ReadyNAS Surveillance supports UO inputioulput boxas input output signals delivered in S485 format are converted to Ethernet ReadyNAS Surveillance can use the signals to do sophisticated setup such as starting recording when input is triggered and triggering output as an event happens gt To set up 10 on ReadyNAS Surveillan 1 Select VO gt Box Settings TE nme 7 me E 2 Select an lO box from the lO Box List 3 Click the Add button to set up the responding actions ofthis event 4 ick the action and then cick the Configure button to modi the details of that action if necessary Output When an event occurs the system sends an output signal to other connected devices lt Emall When an event occurs the system sends email notifications Make sure to add at least one email contact CMS When an event occurs the system sends a signal to the central management software GMS CMS highlights tis event lt Show on Camera If an input is triggered the system shows an alert message about the selected cameras 5 the Save button Recordings amp Events 2 ReadyNAS Surveillance Add on gt To specity lO pin settings 1 Se
2. 5 Sot start time and end time of the period you want to back up or highlight the video records that you want to back up Select the cameras you want to back up and cick the OK button 7 Select the time slot that you want to back up Management as ReadyNAS Surveillance Add on 8 Click the Backup bution 3 Specily the details for your backup 10 Optional To use the Playback application to back records in the backup folder select the Include Playback application check box 11 Cli the OK bution Use Windows Explorer to Back Up Video Data To back up video data in a public fold In Windows Explorer look for plus the address of your ReadyNAS system 2 Open the publi folder 3 Enlor the name and password of ho administrator 4 Select the volume and open tha VIDEODATA folder 5 Copy the date folder thal you want to back up to your computer To back up video data through FTI d In Windows Explorer look for fpi plus the IP address of your ReadyNAS system 2 Entar the name and password of ho administrator 3 Select the volume and open tha VIDEODATA folder 4 Copy the dato folder that you want to back up your computer Delete Recorded Video You recorded video using tho Backup System tool Windows Explorer gt To use the Backup System too to delete recorded video 1 On the Windows Start menu select f or select Program
3. woth hat th 8 At the scale of the hours display 2 Sot the date and the start tme and end time tor the day that you want to search 3 Select he cameras that you want to access the length of tme you want to You can use the folowing options in this sereen Refresh Relrosh the screen Left arrow or right arrow Go to previous next recording date Video Preview Select the Enable Preview check box to display the recorded video Start and End Periods Select the start and end time points that indicate the time period you wouid like to Time The numbers from left to right indicate tho hours in 24 hour clock You can use the scale bar to modify the scale You can choose from two recording modes Record Always and Record on Event They are shown in differant colors Search and Playback E ReadyNAS Survellance Add on Show Records Select this check box show the time period you specified Show Event Log Select this check box to make the Time Table show the time of event detection You define the colors of events gt To customize the colors for event types You can change the color of the bars that indicate each event type This might help you select video clips 1 Right click a bar red by default and a color palette displays ers P EE 2 Select the new color that you want to use and cick OK
4. which you aro prompted to download and install during tho ReadyNAS Surveillance installation Install Surveillance gt On Windows Server 2008 the ReadyNAS Surveillance Toolkit needs be installed before the Add on See ReadyNAS Surveillance Toolkit on page 9 When you download the ReadyNAS Surveillance Add on you can purchase a license or uso the tree 30 day trial version gt To install Surveillance 1 Mako sure that your ReadyNAS storage unit is installed and working on your network 2 Uso the RAlDar discovery toc to display the FrontView screen for your ReadyNAS storage system 3 In from tho main menu select Add ons gt Installed 4 Clck Surveilanco Add on to install it Getting Started ReadyNAS Surveillance Add on Make Sure You Have the Licenses You Need You need a license for each ReadyNAS storage system jat wil use the Surveillance Add on When you purchase a license you need to activate Activate a License on page 32 You can transfer an active license from one ReadyNAS unit to another but you cannot duplicate single license for use on ReadyNAS units See Transfer Licenses on page 34 Log In to ReadyNAS Surveillance gt Tolog 1 In FrontView from the main menu select Add ons gt Installed 2 the Manage ReadyNAS Surveillance bution You are prompted ta log in Network Video Recorder 3 Optional To change the languag
5. COE E gt Search and Playback P ReadyNAS Surveillance Add on Playback Screen The following figure shows the Playback sereen Figure 5 Playback screen with video This sereen has buttons on the side panel and at the bottom Browse earch I Open record Settings Post processing Backup Save image Export sereen ai Zoomin Zoom out Reduce speed Increase speed Cue Figure 6 Playback side panel buttons Search and layback ReadyNAS Surveillance Add on Browse mode Piay the recorded video when in Search mode Open Record Click the Open Record button to access the Date Time panel and select the video records that you want to review Settings Go to the Playback Setings screen See Playback Settings on page 68 Screen division Click a button to change the display To switch to single camera display double click a particular video image Double click the screen again 1o return to the previous layout The following figure shows tho buttons at the bottom of the screen Information window Previous Stop Play Pause Next Volume 6 Figure 7 Playback control panel buttons bottom of the sereen The Information window displays video date and time cue in and cue out point times and speed Playback Settings Cn the Playback conta
6. Select IP Camera gt Camera Settings gt Camera Search 2 the Search bution POE ESS FM oen Tho screen expands and lists the currently available cameras The inserted cameras are shown in blue 3 Clk the con to add a camera to your camera list Tho Camara Settings screen displays e 4 Typo the camera namo user name and password Assign each camer to different video channel Aller the trial period a license key is needed for each channel For better compatibility between the camera and the ReadyNAS system make sure that ho privilege of camera credential is admin level Camera Setup Readynas Surveillance Add on 5 Click the Add bution The updated camera list displays gt To manually add camer 1 Select IP Camera gt Camera Settings E The number of rows in oe the Camera list depends m on your license 2 lick the next avaliable row in the Camera List and enter the camera s information Camera name Name of the camera Address IP address Port Transmission port Administrator Name Login user name Password Login password To save time you can cick Auto Detection to automatically detect the channel protocol vendor and model I you prefer you ean enter this information manually Camera Channel Tho assigned channel number for cach camera source Protocol Data transmission proto
7. Start Menu bution 2 Select Open E Map Set Up an E map Before you set up an E map your cameras and I O devices must be running on the Surveillance system Locate image fles of the maps that you want to use The maximum size of each map is 500 KB You must add atleast one map image fl After you add an E Map and place indicators the camera digital input and output the Indicators tum red if an event occurs To add a map 1 From Live View click the Start Menu button and select Open Camera Iput and Output Edit mode an I 2 Glick the Edit mode 7 icon Right click the Map icon or cick the Add Map button 4 Select a map image and enter the map name ve View E ReadyNAS Surveillance Add on 5 Click OK The map you added appears in the Device and Map tee list and in the center pane Right click to rotate or delete the device icon 8 Drag the device icons to the postions you want on the map Camera Digital Input Select lt to highiight tha device with a green ring on the map and show the status in the Information window If the digital input is from an IP Camera the preview window displays live video of tho camera Digital input ports are typically connected to door sensors mation sensors or outputs rom alarm systems For example building alarm system detects a door open tho camera is and could start recording Came
8. This is the extemal IP address of the router on the LAN that has the ReadyNAS system You can use a taal ike What ls My IP to identity the router s external IP address Server Port The default port far Surveliance Live View is 5150 You must set up port forwarding in the router at the IP address you just specified You must og in to your outer to set up the port forwarding User name Type admin lower caso which is the user name to access ReadyNAS Surveillance Password Enter the password that you set up for the admin user name Tho default is netgeart but NETGEAR recommends that you change it 1o a mora secure password Gening Started ReadyNAS Surveillance Add on 5 Tap Save to save your setings This server is added tothe My Sites screen 5 Tap the server to tho video 7 You can use the icons at the bottom of the screen to adfust the display Geting Started Camera Setup This chapter covers tho folowing topics Add Cameras View or Change Camera Settings View or Change Camera Parameters Specify Lens Settings Set Up a Second Video Stream View Camera Status ReadyNAS Surveillance Add on Add Cameras You can search for cameras on the network and add them or you can add them manually gt To automatically search and add cameras You can either search for UPnP cameras or use the camera search tool Before searching UPnP cameras make sure that the cameras support UPnP 1
9. panel lk the Settings bution Search and Playback E ReadyNAS Survellance Add on For the OSD Settings see Customize the On screen Display on pago 53 You can use the General Settings to specify the folowing Record Display Calendar View the Record Display window as a calendar lt List Control View the Record Display window as a list conto Play Ply when open Selec ttis chack box to sat ia system to start playing he video cip very me a speed Aule ki when recording in mlion only mode Select his chock box 1o set up he Syr tata aio pla wire ar was Next interval Sat tho interval at which ha vdeo gos forward when you cick ihe No Buton on ha contl pana Previous Interval Set tne interval at which tne video gos backward when you cek the Prevaus buton on ha coni pal Capture Image Save in clipboar application software lt Manually save the image file You can select where you want to save the image name the saved flo and select tho format in which you want to save the imago Automatically save the image file If you preset a path or URL and the imago format the system automatically saves the image when you cick the Save Image button on the Playback screen The image is saved to the clipboard and can be pasted to other Search and Playback ReadyNAS Surveillance Add on Intelligent Search Orte Payback cran ara sarc or avito
10. problems prevent tho system from writing t the FTP site the system tres each fle three times before backing up the next fl Jf the connection is lost the system waits for the connection so no file aro skipped Set Up a Backup Server You can specily the server on which o back up video data To setup a backup server 1 Select Auto Backup Management gt Backup Server ato Backup Management EE e m E EJ 2 Set up the FTP server and create a folder for backup fios The folder format is FolderNamo FolderName SubFolderName and so on For example AutoBackupiN VR 3 Alter you fil in the fields click the Test FTP bution Tho system creatos an FTP folder 4 that the test was successful Cick the Save button 8 sure thatthe administrator for ReadyNAS Survellanco has access the FTP account and has permission to upload rewrite and delete fles and create new folders Also make that the FTP server has enough space for auto backup To avoid backup failures verily the FTP server condition regularly make sure it has enough space for the video flos and that system is operating properly Management a ReadyNAS Surveillance Add on Backup System Tool Once you specily the ReadyNAS IP address and enter the Surveillance user name and password you can use the Backup System Tool to create a backup job from your Windows Computer The backup d
11. to match their bandwidth restrictions Select the preferred stream type of each camera as the default Live View profile specify the stream for each camera 1 From Live cick hos Settings bution 2 the Camera tab 3 Adjust the stream profile of a camera 4 Click a camera and select its stream profie and cick the Copy to button to apply this profile to other channels 5 Click the OK bution tive View Readynas Surveillance Add on Customize the On screen Display You can customize the onscreen 080 To specity OSD settings 1 From Liva cick S Stns tuton 2 Cick the 080 tab 3 Solac the Enable camera OSD chock box 4 Select the foreground and background settings of the OSD 5 E n the Info section select the check boxes to specify which information to display on the screen 6 ick o Apply buton to preview the result 7 Optional Click the Default button to revert to the defaut settings i necessary 8 When you are fished making changes cick the OK bution Liveview s ReadyNAS Surveillance Add on Set the Monitor Display for Auto Scan Tro primary channel is aways onscreen when you activate auto scan To sot the monitor display 1 From Le Von ciek me S Stings buron 2 Click the Monitor Display tab 3 Select the primary channel Tho primary channel displays when you activate auto scan 4 Select he secondary channel The secon
12. AS Survellance Add on Recording Schedule You can use the recording schedule to specily when to start and stop recording When you sel an event you can speciy thal motion ar digital input is triggered rom other cameras This means that the system detects motion or digital input from other cameras or the VO box the camera begins recording Noto When changing the motion detection settings of a camera make sure to disconnect your unit and that camera first Alter you finish reconnecting them automaticaly updates the settings in your uni gt To set up a recording schedule 1 Select Recording amp Event gt Recording Settings gt Recording Schedule 2 Select the radio button for Day or Week Day Schedule recordings at the same time Week Schedule the recording for each day of the week Glick a camera in the Camera List o select i 4 Uso tho folowing buttons to create or adjust schedule Insert Insert new schedules Delete Delete the selected schedule Configure Modify the schedule and recording mode settings Copy today s schedule to ather channels or copy this week s schedule to other days of a week or other channels 5 it you want to modiy the time siat cick the Configure button to modly the settings first The default setting the camera s recording schedule is from 00 00 to 24 00 Note To change the recording time length you can drag the end of the time bar
13. NAS Surveillance Add on 7 Select the 8 Erter the serial number 3 the Activate button 10 Save the fle censa dl on portable media such as a USB lash drive 11 Ratum to the computer that is logged in to ReadyNAS Surveilance 12 Import the license fle to the ReadyNAS uni Tho License List is updated if the license ls activated successful The ReadyNAS storage system reboots automaticaly Transfer Licenses Licenses are available license ReadyNAS Surveillance software is stored on the ReadyNAS storage system s hard disk If you format the ReadyNAS hard disk or reset the ReadyNAS storage system to its factory Settings your licenses are deleted multiple types 1 camera license 2 camera license and 4 camera You can transfer a license from a ReadyNAS system You can also uninstall the ReadyNAS Surveillance software and reinstall it iater or install on a diferent ReadyNAS storage system if the license has not expired To transfer a license when you have Ini Select Management gt License Management gt Transter eria raperet aie p 2 Select a icense on the License List Tho selected license is shown in the Input SIN field 3 Clk the Transfer button to transfer the icense Management ReadyNAS Survellance Add on gt To transfer a license when you are offline 1 Select Management gt License Management gt Transto im ent we ei el
14. NETGEAR ReadyNAS Surveillance Add on Manual Firmware RAlDiator 4 2 17 or later ReadyNAS Surveillance Add on 20 2NETGEAR ne Al ighis esee No pro ths pubtcason may be rpreduced vansmied transcribed stared in a system orans Tnt anjanguige any lar ar by any means witout he wien permission NETGEAR he Technical Support Thank you lar choosing NETGEAR To register yo product e latest product updates get upp ole lfomaton abou the ops covered m the manual st be Suppo ep support retgearcon Prane US amp Canada oniy NETGEAR Prane Other Counties Check the lat ol phone ants at ip netgear com app anewers etat Trademarks NETGEAR the NETGEAR logo and Connect with Innovaton vademarks ador registered rademarks of NETGEAR Ine ande te subudares inthe Unled Slates andr ene cours e suec a ange lout raten Omer band produ nanes are regia Wadena of ol he eec Felder 2011 NETGEAR hc Al ts reserved Statement of Conditions Ta improve tema design operational uncon andor relay NETGEAR reserves the right a make changes product desorbed Ia document witout notce NETGEAR does nosse any labi inat may aur Aie t e ao or apphatan productis rcl auta desc here Contents Chapteri Getting Started About ReadyNAS Sunveilanco Compatible Products Requirements Install Surveilance M
15. S Surveillance Add on Activate a License You can activate a license in wo ways online and affine gt To activate a license when you are online 1 Log in to Suveilance and select Management gt License Management gt Activate 2 Inthe Online Activation section enter tho serial number 3 Clk the Activate bution The license is updated in the License List if itis activated successfully The ReadyNAS system reboots automatically Management Readynas Survellance Add on To activate a license when your ReadyNAS system is I ho ReadyNAS storage system is set up in an intranet LAN without an Internet connection you can stil activate the license with the License Tool The Offino License Tool is part of the ReadyNAS Surveillance Toolkit 1 From a computer on the samo ating LAN as tho ReadyNAS system log in to Survellance and select Management gt License Management gt Activate pm 2 the Export bution Download dialog box displays 3 Save the oie eq flo to portable modia such as a USB fash drive 4 the fle to computer that has Intemet access 8 Il you have nol already dono so Install the NETGEAR Surveillance Toolkit on this computer 6 On the Windows Start menu select Surveillance gt Offline License Tool select All Programs gt ReadyNAS Management Ready
16. a user access to the lags go to the Network Service screen and select the Log Access check box You can view tha kinds of logs NVR Log The log information for the NVA system such as system recording user access information and auto backup The Event Log shows entries only event is selected on the Event amp Action Management screen NVR Event Log The log information for the Event amp Action Management features such as motion detection ar camera connection last Export and Backup Log This log tracks exported and backed up video data gt event logs 1 Select Management gt Log System Toa Syrien is asma EE mm 2 Clckihe tab lo view the log that you want to Management Readynas Survellance Add on Manage the Configuration File The configuration includes the ReadyNAS Surveillance setings that you You can save the configuration and you can load it onto a ReadyNAS system You can also save Video data using the backup feature see Manage the Configuration File on page 39 Save and Load Configurations gt To save the configuration 7 Select Management gt Save Load Configuration gt Save Configuration SovejLsad configuration m Lim pne m 2 Ifyou want to inchde E Map settings E Map on page 57 select the E Map Settings check 3 Cick Save gt To load the configurat
17. ake Sure You Have the Licenses Vou Need Log into ReadyNAS Survelance ReadyNAS Survllance Toolkit ReadyNAS Surveilano Mabie App Chapter2 Camera Setup Cameras View or Change Camara Settings View or Change Camera Parameters Speci Lens Settings Set Up a Second Video Seam View Gamera Status Chapter3 Recordings amp Events Set the Recording Mode Set Up Events and Actions Sot Up Camera Evarts Systom Events Recording Schedule a Schaduled Event to Another Day Event Contacts VO Boxes Email Soup SMTP Server Setup Chapter4 Management Activate a License Transtar Licenses FRomove the ReadyNAS Surveitance Add on Manage Users View Logs Manage the Configuration File Save and Load Configurations ELELE BUBeeRe OBR EFITTITI ReadyNAS Surveillance Add on Set Up a Backup Schedule Set Up a Backup Server Backup System Tool Set Up a Backup Job Use Windows Explorar to Back Up Video Data Deleta Recorded Video CMS Service Setup Chapter5 Live View Access Live View Remote Live Viewer Tool Suveilance Mobile App Live View Screen 1 View Settings General Settings Set Up the Stream Profe Tor Each Camera Customize the On screen Display Set the Monitor Display lor Auto Scan Set Up Notcations Set Up Joystick Cantal Set Up Live View Sound for an Event Set Up an Emap Chapter 6 Search and Playback Access Playback Search Recorded Video Playback Sereen Play
18. back Settings Inteligent Search Post Processing Too Save Video Save an mage Print an mage Back Up Recorded Video Getting Started This chapter covers tho following topics About ReadyNAS Surveillance Requirements Make Sure You Have the Licenses You Need Install Surveitance 109 in to ReadyNAS Surveilance ReadyNAS Surveillance Toolkit ReadyNAS Surveilance Mobile App You can also visit the ReadyNAS Photos ll Community Support Forum at wanroadynas comAorumvviewforum php ReadyNAS Surveillance Add on About ReadyNAS Surveillance The ReadyNAS Surveillance Add on puts network video recorder NVR soltware onto the same ReadyNAS storage system that you can use to store your video data You use Surveilance to manage your IP cameras stream video and store video data Tho folowing Wustralion shows a small network that uses two IP cameras with a single ReadyNAS system Access Surveillance Readynas from yourPC system with NUR software Mobile devices use Live View or streaming video Use the NETGEAR NVR toolkit on your laptop q s 4 1P cameras Figure 1 Network with ReadyNAS Surveillance and two IP cameras You can uso tree trial version of ReadyNAS Surveillance for 30 days Alter that you need one or licenses to run the software Before you install ReadyNAS 5 you must install your ReadyNAS storage system and set it up as described in yo
19. col lt Vendor Camara vendor name Model Camera model name For compatibility between camera and system make sure the privilege of camera credential is admin level 4 Glick tha Save button Note You can use the Reset button to retur tothe latest saved senings of the selected camera The Clear bution retums all the settings to hei default values ReadyNAS Surveillance Add on View or Change Camera Settings gt To view or change camera settings d Select IP Camera gt Camera Settings Tho Camara Settings tab is selected 2 To make changes click camera to select it 3 the information for this camera Camera Name The name of the camera Address The IP address Port Tho transmission por Administrator Name Login user name Password Login password 4 Entar channel protocol vendor and modal details To save time you can click Aulo Detection to automatically detect the channel protocol vendor and model If you prefer you can enter his information manually Video Channel The camera number of the video feed Protocol Data transmission protocol Vendor Camera vendor name Model Camera model rama 5 Click the Save button You can use this method to replace a camera If needed Camera Setup 6 ReadyNAS Surveillance Add on View or Change Camera Parameters You can view and change details about each camera gt To
20. dary channel has second priority whan you activate auto scan 5 Enter the time interval for scan In the Na typo fld select the screen division 7 Cick the OK button ive View ReadyNAS Survellance Add on Set Up Notifications You can sot up notiicatons about recording status and vents To setup notifications 3 From Live View cick 4 Settings boton 2 Cickiho Notification tab 3 Enter the folowing setings Show recording status Select this check box to show the crystal ball with recording status on the Live View display Show camera event Select this check box to display the text describing the detected camera event Popup system event Select this check box to pop up the system event message dalog box as a waming if a system event occurs Popup E map on event Select this check box to pop up tho E map with an event indicator if a camera or box event occurs 4 ick tha OK button Tho Popup E map on event setting activates ony if an event occurs This means that you must sel up camera motion camera input and VO box input as events See Set Up Events and Actions on page 23 Live View ss ReadyNAS Surveillance Add on Set Up Joystick Control gt To set up joystick control 1 From Live View cick 4 Settings bution 2 the Joystick tab Enter the setings Function Select the function for the joystick from the drop down list Parameter Select the pr
21. e Activated only in tho following period The selected event is active only in the designated time which can include two days such as from 18 00 6 00 p m to 0900 8 00 a m the following morning 6 Select a radio button enter the ime applicable and cick OK 7 Inthe Event amp Management screen cick Add The action drop down ist displays these options Output Send to the digital output ist Email Send nolification of this event to the contacts list CMS Send notification of this event to the Central Management Software CMS system 8 Select an action and cick Tho event and action aro displayed in the Event amp Action table 3 Optional To sot up more events and action repeat steps 2 through 10 When you are finished cick Save System Events The system events are based on lost FTP access and unfinished backups You can sel up noliicaton for ese To set up email notification for system events The email notification is sent to the contacts list 1 Select Recording amp Events gt Event amp Action Management T amp A ane oom E 2 Click System to expand this section of the ccroon 3 You can select one or both the Unable to access FTP and the check boxes 4 Click Add Tho events and email notification are displayed in tho Event amp Action table 5 Cick Save unfinished Recordings amp Events E ReadyN
22. e select a language from the drop down Ist 4 Inthe user name field ype admin 5 Inthe password field type netgeart Tho Surveillance screen displays The main monu is in the upper right comer ofthe Settings Sot up Surveillance to work with your cameras and specity recording events and associated actions such as noiieation Live View View live streaming video Playback View recorded video Getting Started ReadyNAS Survellance Add on ReadyNAS Surveillance Toolkit Tho took is a Windows based group of applications that you can use to work with ReadyNAS Surveillance without using Ino FronlView application for your ReadyNAS storage system This is especialy useful i your computer or moblle device is nol on the same local area network LAN as the ReadyNAS storage unit Note On Windows Server 2008 the ReadyNAS Surveillance Toolkit needs to be installed before the Add on The toolkit includes the folowing Backup System Offine License Tool Playback System Remote Live Viewer Verlication Toot gt To Install the ReadyNAS Surveillance Toolkit 1 Download the toolkit from the ReadyNAS download website at wincroadynas com surveilanco 2 Unzip the file and double cick the setup exe fle 3 When prompted select a setup language or leave English selected 4 Next and follow the wizard steps to accept tho license agreement far the ReadyNAS Surveillance Took and to enter your use
23. ept the management functions User Users can change their passwords uso Live View and use Playback Guest user Users can use Live View and Playback but cannot change their passwords 4 Select the check boves that speci Live View access for the user 5 Select the check boxes that specily Playback access whether this user back up or delete recorded data 5 ick the Create New User bution The administrator is the only user who can use all the functions The default administrator account is admin You cannot create another administrator account and you cannot create another user that is named Management ReadyNAS Surveillance Add on gt modity user information 7 Select Management gt User Management gt Modily Users p pd n the Usar List on the bottom of this screen cick user Adjust the settings described in ha previous section Click Modity Us Save 2 n gt To change a user s password 1 Select Management gt User Management gt Change Password rer Management en pl 2 Select the user 3 Enter a new password in both feds 4 Glick OK gt To delete a user You can delete any user except admin 1 Select Management gt User Management gt Modify Users 2 Click the Delete icon for he user you want to delete Cick OK Management ReadyNAS Surveillance Add on View Logs alaw
24. eset point from the drop down list lt Default Click to retum to the defaut settings Import Click to import the settings Export Click to export the settings 4 Clk the OK button ve View ReadyNAS Survellance Add on Set Up Live View Sound for an Event gt To sot up Live sound for an event 1 From Live View chc tne s Settings button 2 Click tha Sound tab 3 Solcttho Enable playing sound on event chock box 4 Solocttho sound fle tho default sound or user defined sound wav 5 the OK button The sound activates only when an event occurs This means you must set up camera motion camera VO and VO box as events Seo Ser Up Events and Actions on page 23 E Map From Live View you can access he feature E man lets you view devico camera or NO box locations and alarm status The device icons on E map lum red if an alarm occurs When an event occurs the related E map pops up to indicate the location of this event You can control his from tha Live View Settings screen by clicking the Notifications tab Seo Set Up Notifications on page 55 has two modes lt Edit mode You can add edit or delete maps and device indicators Browse mode You cannot make changes but you can check the map hierarchies and devica list to see indicators and related information Live View s ReadyNAS Surveillance Add on gt To access E Map d From Live View dick the
25. estination can be hard disk or CD ROM gt To set up ReadyNAS access for the Backup System tool 4 On the Windows Start menu select A or select All Programs gt ReadyNAS Surveillance gt Backup System 3 Enter the folowing information In the Server Name field enter the name of the ReadyNAS system In the Address ied type the IP address of that ReadyNAS system you can use the RAlDar to to find out what the IP address i Modify the port number if necessary In the User Name fal type admin the Surveillance user name In the Password field type the password that you use to access Surveillance The dolaut password is netgeart but NETGEAR recommends that you change this to a more secure password 4 Seloct the Save Password check box Management Readynas Surveillance Add on 5 Clckihe Test Server bution to test the connection between the local application and tho ReadyNAS 6 the Add button to add this ReadyNAS system into the remate server Ist 7 the OK bution Set Up a Backup Job To use the Backup System tool to set up a backup job 1 M you have not already done so set up access to ReadyNAS Surveilance as described no previous seston 2 On the Windows Start menu select select All Programs gt ReadyNAS Surveltance gt Backup System 3 ick the tangle button next to the f Remote Server She icon and select a server ReadyNAS system 4 Cick New Period
26. from 24 00 back to the length you want and drag the beginning of the time bar to tho point at which you want to begin recording Recordings amp Events 25 ReadyNAS Surveillance Add on 5 Select the recording mode Always Record Always record Record on Event Recording s triggered by an event such as motion detected by a camara or digital input It you want to use the motion event first make sure that motion detection is enabled for the camera 7 Wt you want to ad another new schedule cick the Insert button to add a new one 3 Clckthe Save buon Copy a Scheduled Event to Another Day gt To copy a scheduled event 1 Select Recording amp Event gt Recording Settings gt Recording Schedule a IM E 2 Select the radi button for Day or Week Day Schedule rocordings at the samo time every day Week Schedule ho recording for each day of the weak diferent 3 Glick a camera in the Camera List to select I 4 Click Copy Ono of the folowing dialog boxes displays curent Day ttd t ey cure Seat Recordings amp Events 3 ReadyNAS Survellance Add on 5 Select the destination channels I you are copying a week schedule select the days of the week 5 Glick OK Add Event Contacts To add event contac 1 Select Recording amp Event gt Email gt Contacts 2 Type tha name of a the new contact 3
27. he time slot you set instead of the clips gt To back up the recorded video the Playback screen cick the Backup button Sel the start time and end time for the portion of the video that you want o back up Select the cameras with the videos that you want to back up Select the directory in which you want to save the backup data Click the Backup bution Tho system begins the backup process automaticaly PRRe RS Search and Playback n
28. ion NETGEAR recommends that you export to the format when saving video If you export to the av format the fram rata is increased when that video plays causing It to run faster than Search and Playback E ReadyNAS Survellance Add on Save an Image gt To save an imag 1 From the Playback screen click the Save Image 4 button when the image you want is shown on the screen 2 Solac the folder where you want to save the fle 3 Select an image format BMP or JPEG 4 Typo the name 5 the Save button You can skip Step 2 by presetting the folder where you want to save the images and the format you want to save them in Search and Playback Readynas Surveillance Add on Print an Image You can print the current image of the video you select gt To print an image 1 On the Playback screen click the Print button when tho image you want is shown on the screen 2 Set print settings Print Content Print the image from th ecurrent selected channel or all he channels shown on the screen Page Setting Specly one of these settings Original size Select this to have the image print in the original size Fit the page Select this to have the image fit the page Align Image Top centar or bottom the Print bution Back Up Recorded Video Ditterent trom Save Video the Backup function saves the recorded videos that belong to t
29. ion 1 Select Management gt Save Load Configuration gt Load Configuration Configuration 2 Click the Load buton at the bottom of the screen Management ReadyNAS Surveillance Add on gt To load the factory default configuration 4 Select Management gt Save Load Configuration gt Load Configuration Ic ente 2 ick the Load bution Set Up a Backup Schedule The backup schedule lets you specify when your video data is backed up gt To set up a backup schedule 41 Select Recording amp Event gt Auto Backup Management gt Backup Schedule hate Backup Management ree eme n 2 Specly the backup settings lt Auto Backup Select the Enable check box for automatic backup Dally Backup Time The daily scheduled tmo to start the backup process Management Readynas Survellance Add on Start Time Tho start time of video recorded on the previous dato End Time Tho end timo of video recorded on tho previous dato Camera Select the channels to back up The Curront Event Settings show if auto backup is enabled or disabled Oiek tha Save button 4 Set up the event and action see Set Up Events and Actions on page 23 The system backs up recorded video fles ona by one Il the connection between the ReadyNAS unit and FTP server is normal but
30. lect lO gt VO Pin Settings Tose ine ae E 2 Change tho setings as needed and cick Save Email Setup You can set up an SMTP Simple Mail Transport Protocol server and contacts for your email notifications SMTP Server Setup You can set up an SMTP server gt To set up an SMTP server 1 Select Recording amp Event gt Emall gt SMTP Server genre cec rM M EL E E 2 Complete the folowing fields Server Address SMTP server IP address Port SMTP Sender Sender information Recordings amp Events E ReadyNAS Surveillance Add on Subject The subject of the Body content SMTP Authentication Select this check box if you want to use authentication You need to enter the user name and password in the following two fields Username The user name for authentication Password The password for authentication 3 Click the Send Test Mall button The system sends a test message to the sender 4 that the test message arived at its destination 5 the Save button Recordings amp Events 3 Management This chapter covers tho following topics Activate a License Transfer Licenses Remove the ReadyNAS Survellanco Add on Manage Users View Logs Manage the Configuration File Delete Recorded Video Manage the Configuration File CMS Service Setup E ReadyNA
31. ng Recording Time Tho current ree capacity divided by tho dynamic total bit rate If tha value in the total forthe Bit Rate column is it means that the system load Is too heavy Camera Setup Recordings amp Events This chapter covers tho following topics Set the Recording Mode Set Up Events and Actions Recording Schedule VO Boxes Email Setup ReadyNAS Surveillance Add on Set the Recording Mode The recording made determines when each camera records video To set th 1 Select Recording amp Event gt Recording Settings gt Recording Mode cording mode caring Sang ms gusti uem riesen i E 2 Select the recording mode that you want to uso No Recording Do not record video Record by Schedule Record video based on a schedule Always Record Automatically record video continuously on the selected cameras It you select Aways Record the selected cameras start to record immediately Automatic Recycle Select the Enable check box if you want to recycle disk space automatically when the disk ful Keep Video Sot a period during which the recorded video clips wil bo kapt intact It both the Automatic Recycle check box and the Keep Video check box are selected the Automatic Recycle setting overrides the Keep Video setting In ather words i your disk gots ful newer video content is written on top of older content which erases the older conten
32. o i i nir s 2 Selecta license inthe License Lit The selected license is shown in the Input SIN field 3 the Export bution to export registration with rame 4 Il you have rot already done so install the ReadyNAS Surveillance Toolkt on the computer that has Internet access 5 Copy the exported offine rag fle to that computer 6 On the Windows Start menu select for select All Programs gt ReadyNAS Surveillance gt Offline License Tool 10 open the reg fie 7 Click the Transfer button to transfer the license Remove the ReadyNAS Surveillance Add on gt To remove Surveillance 1 FrontViow navigate to the Add ons Available screen From tho Dashboard sereen firmware version 5 3 select Configure gt Add ons gt Available From the main menu firmware version 4 2 select Add ons gt Available 2 Click the Remove buton The Surveillance add on is removed Management as ReadyNAS Survellance Add on Manage Users gt To view a list of users Select Management User Management gt Create New Users The list displays at the bottom of the screen gt To create a new user 1 Select Management User Management gt Create New Users User Management 5 anm RR RR mem 2 Entar tho user namo and password forthe new 3 Select the group for this user Power user Power users can access settings exc
33. r name and company You are prompted to select a complete or custom installation Gening Started ReadyNAS Surveillance Add on 5 Selecta radio button and cick Next You are prompted to instal Visual C 2005 Runtime Libraries which you need to use the ReadyNAS Surveillance Toolkit e 6 Click Yes and then accept the license agreement The folowing screen displays 7 Select radio bution and click Finish Alor your computer restarts the toolkit is available on the Windows Start menu gt To uninstall the toolkit d On the Windows Start menu select All Programs gt ReadyNAS Surveillance gt Uninstall ReadyNAS Surveillance 2 Select he Remove rado button and click Next 3 Follow the wizard prompts to uninstall the sofware Getting Started 10 Readynas Surveillance Add on ReadyNAS Surveillance Mobile App You can use the ReadyNAS Surveillance mobile app to view Ive video and take snapshots of it on your iPhone iPad or Android phone gt To set up the app D 2 Download tno app and instali your phone or the Surveillance con Ei launch tho n the My Stes screen tap to add a server The server settings screen displays Use this screen to spacy the location of the server ReadyNAS system to access that has the video that you want to view Server Type a meaningful name to identity this ReadyNAS system Server Address
34. r zoom out The lower right square flashing on the video grid indicates the corresponding view of the camera Stream Profile Select the stream profiles orginal low oF minimum Enable Audio Enable audio on active channels Snapshot Capture a speci video image immediately Toggle Fullscreen Tur the full screen display on and of 1 0 Control Panel You can adus the output pins by turning them on or of Click the Start Menu button and Selec 1O Control Panel 1O control panel with 1 output pin turned off ve View ReadyNAS Surveillance Add on Live View Settings You can customize settings for Live View From the Live View screen click tho s Settings button General Settings When you click the Settings bution fne Settings General tab plays by default You can adjust the folowing Select the Enable audio on active channel check box to enable audio streaming on the active channel Select the Synchronize video trames check box to avoid tearing in the video display during CPU loading It you maka changes click the OK button Live View s ReadyNAS Surveillance Add on Set Up the Stream Profile for Each Camera Tho stream profile consists of streaming video presets This controls tho amount data transfered between the Surveillance application and remote clients The stream profile also allows remate clients to quickly select the appropriate video stream
35. ra Digital Output Select ito highlight the device with a green ring on the map and show the status on the Information window I the digital output is from an IP camera the preview window displays ivo video of tho camera Digtal output ports can be connected to alarms buzzers lights or other inputs to alarm systems You could setup a camera to pass mation event information to these devices For example i tho camera detects motion the lights could tum on 7 Cick the Upload button to activate the settings Edit a gt To edita map 1 ick the Edit mode icon 2 R ghtclck on the Map icon and select Edit Map 3 Whon you are finished making changes clck the Upload button to activate all the settings ve View E ReadyNAS Surveillance Add on Delete a Map gt To delete a map 1 Click the Edit mode 7 icon 2 Right click the Map icon in the Device and Map tree ist and select Delete 3 Upload bution to activate al the setings To delete a device indicator 4 Click the Edit mode icon 2 Right click the indeator and soloct Delete or cick tho Delete bution 3 Click the Upload button to activate all the setings ve View Search and Playback This chapter covers tho following topics Access Playback Search Recorded Video Playback Settings Inteligent Search Post Processing Tool Save a Video Save an Image Print an image Back Up Recorded Video ReadyNAS S
36. s The main video stream can be viewed from a computer on the network or at a remote location with an Internet connection that has the bandwidth to support the flow of information The settings for the main stream are shown in the Gamera Parameters screen See View or Change Camera Parameters on page 17 The second stream is a lower frames per second FPS Ive stream display and is meant to bo viewed from smartphones or mobile devices gt To sot up a second stream 1 Select IP Camera gt Camera Parameters gt Second Stream Settings 2 Adjust the setings as ned Stream Profilo Tho default status is Disabled If you want to allow a moble cont to access this camera select Enable Low Profile The stream profe under 300 kbps is designed for mobile cliant single Minimum Profile Tho stream profile under 100 kbps is designed for mobile client 3 if you made changes cick Save Came ReadyNAS Surveillance Add on View Camera Status To view the camera status select IP Camera gt Camera Status pe a a i The folowing information displays Connection Status Tho status ofthe connection Click the Connect or Disconnect button to chango the connection status Rec Status The recording schedule of this camera at this imo Frame Rate The rate ofthis camera Rate The transmission bit rate of this camera Estimated Remaini
37. s bottom of the sereen Tho butions on the bottom af the screen are as falows Video Information Displays video information including server name curent video status and bi tate lor a selected channel Start Menu Cick the Start menu burton to display the folowing selections Open E Map Upload a map and drag a camera or onto it to track the device location alarm satus wih an instant response f an event occurs For ore information about Emap see E Map on page 57 10 Contro Panel Use the VO device function remotely See Control Panel on age 50 Playback back video Settings Speci Live setings See Live Settings on page 51 Stop PlayiErase Stop play or erase the curent selected video Layout buttons Consol how many video streams are viewed simultaneously and how they are arranged on the screen Auto Scan Cycle through the channels on the display For example you can see oriy 4 500 screens on Live View If you have 16 channels you can cycle through views to see al 16 channels ve View ReadyNAS Surveillance Add on Camera Screen Right Click Button Table Move gbe Digest PTZ Steam Pre Eble Aud Span Tegal Fulkcreen You can right click the camara screen to use the following functions Enable Move Adjust te current view of camera that supports the PT function by dragging the button on the display screen Enable Disable Digital PTZ Click the or button to zoom in o
38. s gt ReadyNAS Surveillance gt Backup System 2 Clck the button next tothe con and select a server a ReadyNAS uni Management Readynas Surveillance Add on Click New Period i Set he start rime and end time or highlight the video records that you want to delete Select the cameras fr which you want to delete records ick the OK bution Select the ime slot for the video that you want to delete and cick the Delete bution Confirm he deletion gt delete recorded video using Windows Explorer n E In Windows Explorer look for plus the IP address of your ReadyNAS system 2 Open tho publ folder 3 Enter the name and password of the administrator 4 Select he volume and open the VIDEODATA folder 5 Select the date folder that you want to delet 5 Delete the folder To keep the system stable do not delete recorded data from the day in which you do the delete process CMS Service Setup You can enable central management software CMS service and specify the port and the maximum number of connections gt To view or change the CMS Service settings 1 Select Network Setup gt Network Service gt CMS Service 2 Speci the setings CMS Server Select the Enable check box for CMS service The port number through which the CMS connects to this ReadyNAS unit Maximum Connections The maximum number of allowed CMS connections Glick tha Sa
39. t Recordings amp Events 2 ReadyNAS Survellance Add on Set Up Events and Actions You can select which events tigger actions such as email notification You can sot up actions in responsa to camera events or system events Set Up Camera Events The available camara events depend on the particular camera and can include the folowing Schodule based events When a schodulod avent occurs the system triggers an action Connect lost When a connection between the camera and this unit is lost the system triggers an action Motion from Camera When video motion is detected the camera triggers an action Digital Input Trigger Any external input can trigger an action gt To set up camera events and triggered actions 1 Select Recording amp Events gt Event amp Action Management IIT em 2 Inthe Camera List cick he camera that you want to work with Check boxes that allow you to select events display 3 Solocta check box for an event that you want to tigger an action In this example the Motion from Camera check box is selected If you select the Motion from Camera check box make sure that your camera s motion sensor is working 4 tha Configure bution Tho Event Configuration dialog displays sequ Recordings amp Events E ReadyNAS Surveillance Add on 5 Select the option that you want Always Activated The selected event is always activ
40. the mobile app to view ivo video trom your iPhone Pad or Android phone See ReadyNAS Survellance Mobl App on page 11 Live View Screen When you select Live the Live View screen displays Camera list drag and drop fo control the d tenn or log out da PTZ camera control Preset point Focus Figure 2 Live View screen with video To adjust the location of streaming video click a camera in the Camera lst and drag it to whore you want the image to be displayed This screen has buttons on the side pane and at the bottom of the screen PTZ camera control is available with cameras that support the PTZ function Camera List Right Click Menu You right click the camera Ist to duplicate and connect or disconnect cameras and other functions Duplicate Camera Create multiple views The duplicated cameras are each shown with a green indicator You can combine Duplicate Camera feature with digital PTZ to enlarge diferent spots and view them in diferent channels while recording the whole view Connect Disconnect Connect or disconnect the camera Logout Server Log out of tho current Connect Disconnect All Connect or disconnect all cameras selected server ve View a Readynas Survellance Add on Information Navigation and Playing Video Video Start Information Menu Playback Settings OIE Delete Figure 3 Live View button
41. tool in Paine irn a a Poss bn 2 Inthe General Setting section select the rado button that you want Apply active channel The settings are applied oniy to the selected channel Apply channels The settings are applied to the channels currently shown on the 3 the fiter setting Visibility Select this check box and adjust the gamma value of the image to enhance the image and make it cleaner Sharpen Select this check box and mave the siider contral to the right to sharpen the image to the left to sohen it Brightness Select this check box and move tho sider control to the right to make the image brighter Contrast Select this check box and move tho sider control to the right to increase contrast Grey Scale Select this check box to shaw the video in gray scale mode so the image displays in black and white Search and Playback E ReadyNAS Surveillance Add on 4 Optional Clck Default to return the default setings 5 Click the OK bution Save a Video To save a video 1 On the Playback screen set up the cuo in and cue out points Click the Save as button Select the folder where you want to save the flo Enter the fle name and click the Save button Select the export format loaa 6 Select he use 7 Select the check boxes to export the recorded video wih OSD POS Transaction 8 ick the OK but
42. ur ReadyNAS Installation guido and user manual You can work with ReadyNAS Surveillance in several ways Surveillance add on This is the main software that you Instali through FrontView It loads the NVR software onto your ReadyNAS storage system and allows you to use your internet browser to specily settings for your system to use Live View and to use Payback ReadyNAS Surveillance toolkit This is a group of Windows based applications that let you use Live View and Playback and manage some settings such as those for backing Up video data without using FroniView Live View for mobile devices Usa your phone or mobile device to view streaming video Getting Started ReadyNAS Survellance Add on Compatible Products ReadyNAS Survellanco is compatible with al x86 basod ReadyNAS platforms including tho ReadyNAS Uta ReadyNAS Pro and ReadyNAS rack mount products ReadyNAS Surveilance is compatible with major IP camera vendors including Axis ACT Arecont IOinVision Mobotix Panasonic Sony Vivotek and many other brands For a complete list visit wanereadynas convsurvellance Requirements To use Surveillance with a compatible ReadyNAS unit and cameras you need the following AIDiator firmware version 4 2 17 or later Licenses based on the number of cameras that you are using A Windows based computer Microsoft Internet Explorer 8 or later Microsoft Visual C 2005 SP1 Redistributable package vcredist x86 exo
43. urveillance Add on Access Playback You can access the Playback screen using ReadyNAS Surveillance or the Playback System tool You have to set up video recording betore you can play back video To access Playback with Surveillance log in to Surveillance and select Playback from tho menu at the top of the screen a gt To access Playback with the Playback System tool have not already dono so install the ReadyNAS Surveillance Toolkit on a lows computer 2 On the Windows Siart menu select or select Programs gt ReadyNAS Surveilance gt Playback System To set up access from the desktop to the ReadyNAS unit cick the Setings buton and cc Server tb system You can click it 2 completo the fields he folds t spec server ReadyNAS system that you want to accese Compl taide 1o in that you amp ihe Test Server button to make sure that the setings are corect Search and Playback ReadyNAS Surveillance Add on Search Recorded Video Tho first time that you go to the Playback screen iis blank because no video has been selected for playback Note that you have to set up video recording before you can play back video gt To search for recorded video 1 On the Playback screen click the Search bution ES P EE d mawe v mamme select the cameras Highlight the length of time
44. ve button Management live View Live View lets you watch video feeds on your computer This chapter covers the folowing topic Access Live View Live View Screen Live View Sotiings as ReadyNAS Survellance Add on Access Live View You can use Live View In two ways through FrontView or with the Remote Live Viewer application from the ReadyNAS Surveillance Toolkit The Live View screen looks tho same when accessed either way gt To access Live View from FrontView 1 dn FroniViow from tho main menu select Add ons gt Installed 2 Lag in to Surveillance and select Live View Remote Live Viewer Tool You need a Windows based computer with the ReadyNAS Surveillance Toolkit installed From the Windows Start monu or All Programs gt ReadyNAS Surveillance gt Remote Live Views The first timo you use the Remote Live Viewer application you must set up access from tho desktop to the ReadyNAS system gt To specity the Remote Live Viewer settings 1 ZE icon and the Sara ab StS Jom aoe so man me mT This is a ReadyNAS system You ean click it io complete the elds Sr 2 Completo the folds to specily the server ReadyNAS unit that you wart to access 3 Test Server bution to make sure that the settings are correct uve View E ReadyNAS Surveillance Add on Surveillance Mobile App You can use
45. view or change camera parameters 1 Select IP Camera gt Camera Parameters The Camera Parameters tab displays 2 Inthe Camera List cick the camera that you want to modify 3 Modiy the information tor this camera Camera Name Name of the camera Video Format Select the format that this camera supports Frame Rate Solect the trame rate of the camara Resolution Select the resolution of the camera Quality Select the image quality of the camera 4 Glick tha Save button Camera Setup 7 ReadyNAS Surveillance Add on Specify Lens Settings You can specify whether or not each camera uses an Immervision lens and is position gt To specity lens settings 1 Select IP Camera gt Camera Parameters gt Lens Settings 2 In tho Camera List cick the camara that you want to modiy 3 Modify the information for the camera Camera Name Name of the camera ImmerVision Lens If an ImmerVision lens is installed select the Enable radio buton Camera Position Select the position of the camera as wall ceiling or ground 4 Save button Note It you enable the lens and 118 not installed correctly or not installed at all warning message displays if someone tiesto operate the ens on the Live View screen Camera Setup 18 Readynas Survellance Add on Set Up a Second Video Stream You can set up two stream
46. you an ck t Seren Mo B pecans aj You can search for the following events General Motion Detect all movements in the defined area Foreign Object Trigger an alarm when an object appears in the defined area on the Missing Object An alarm is triggered when tho selected object is removed from the defined area on the screen Focus Lost The system informs you when any camera loses its focus Camera Occlusion An alarm is triggered when the camera s blocked To use intelligent search 1 Define the detection zone by dragging to draw a detection zone You defino more than one zone by repeating this step 2 Optional To search for a missing object define a detection object by dragging to draw a detection zone 3 Modify the seting by changing the sider control Maving toward the right increases the sensiiviy leval For general motion this means a relatively small movement wil trigger the alarm 4 Set he interval Moving the slider toward the right increases the time interval so that the alarm will not be vigered unless the movement lasts longer 5 Select the Stop when found check box Otherwise the system continues to search all events instead of stopping at the moment the event is found Search and Playback E ReadyNAS Surveillance Add on 6 Cickthe Search bution Post Processing Tool You can use this tool to adjust the appearance of recorded video gt To use the Post Processing

ReadyNAS Surveillance Add-on User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents