UT & ST Series User Manual
Contents
1. TOCONNECT Professional a Le PROCONNECT UNDER TABLE SERIES USER MANUAL Under Table PCUT amp Side Table PCST Series Thank you for purchasing our professional under table connecting panel CAUTION e Only connect the power connection to a voltage feed of 240 Volt 50Hz single phase with protective earth NOTE Maximum total load is 10A 2400W across the entire unit e There is a 10A fuse built in to the IEC 60320 rubber connector which may not be replaced by a fuse with a higher ampere value A spare fuse can be found in the fuse drawer of the IEC Plug e Do not wet the unit and keep in a dry well ventilated area e If the supply cord is damaged it shall be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard INSTALLATION e The ProCONNECT unit should be installed by a professional technician Define the area under on top the table where the unit must go Using supplied screws thumb screws fasten the unit to the table e Mount the cables using included brackets and appropriate mounting material e Make sure that the cables will not get broken jammed or distended e Connect the Audio Visual cable ends to the respective cables sockets Please also connect the 240V Power to a Wall Plug e Ensure that the power outlet and the signal connectors are only being used with the maximum allowable voltage and current NOTE Maximum total load is 10A 2400W acro2. ss the entire unit INSTRUCTIONS FOR USE e Cleaning Switch off the system or pull the plug before cleaning DO NOT use any cleaning agents or water on the unit Only use a soft and lightly moisturized cloth I 4 Os ee La 1 YEAR WARRANTY ON ALL PROCONNECT SERIES
Download Pdf Manuals
Related Search