4-CH Network Video Recorder - PLANET Technology Corporation.
Contents
1. 4 CH Network Video Recorder NVR 400 User s Manual Version 1 0 Copyright Copyright C 2009 PLANET Technology Corp All rights reserved The products and programs described in this User s Manual are licensed products of PLANET Technology This User s Manual contains proprietary information protected by copyright and this User s Manual and all accompanying hardware software and documentation are copyrighted No part of this Users Manual may be copied photocopied reproduced translated or reduced to any electronic medium or machine readable form by any means by electronic or mechanical Including photocopying recording or information storage and retrieval systems for any purpose other than the purchaser s personal use and without the prior express written permission of PLANET Technology Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications and makes no warranty and representation either implied or expressed with respect to the quality performance merchantability or fitness for a particular purpose PLANET has made every effort to ensure that this User s Manual is accurate PLANET disclaims liability for any inaccuracies or omissions that may have occurred Information in this User s Manual is subject to change without notice and does not represent a commitment on the part of PLANET PLANET assumes no responsibility for any inaccuracies that may be contai2. User ID Enter the user name to login the mail server Password Enter the password to login the mail server Confirm Password Enter the password again for confirmation 6 Sender E mail Enter the email address of the user e g john mymail com who will send the email 6 Primary Secondary E mail Enter the first and second email address of the user who will receive the email T NVR 400 User Guide R Configuration Lan Time Notification Firmware onfiguration Setup J Delete all files Format all disks and reset default E Keep log file Backup Config file J Restore Config file ESI S Apply Delete all files Select this option and click Apply to delete all files stored on the installed hard disk drives Format all disks and reset default select this option and click Apply to format the installed hard disk drives and reset the device to the default configuration Select the Keep log file check box to save the log file when reset Backup Config file Select this option and click Apply to save the current customized configuration of the device as a file on your PC Restore Config file Click Browse to find the configuration file and then click Apply to restore the customized configuration NOTE Please remember to reboot your device when you clicked Apply button R Firmware Firmware Update Firmware Version 2 0 4 build 7 Release Date 2008 9 23 Firmware File ae Update This sub menu
3. ACCESS THE RECORDING FILES e e 39 ee ee NVR 400 User Guide CHAPTER 1 INTRODUCTION TO YOUR DEVICE 1 1 Checking the Package Contents Check the items contained in the package carefully You should have the following 1 x NVR 400 1 x Power Cord 1 x Power Adapter 1 x RJ 45 Cable 4 x Rubber Pad 4 x Screw 1 x User s Manual CD ROM 1 x Quick Installation Guide NOTE Once any item contained is damaged or missing contact the authorized dealer of your locale 1 2 Features and Benefits simultaneous Record and Live Video Streams 4 IP Cameras Manual or Schedule Recording Web based Administration for Easy Configuration Provides FTP UPnP Media iTunes Server 2 USB Ports for External Backup and Printer Supports RAID 0 1 and JBOD Equips with Gigabit Ethernet Port Provides Multiple Languages Firmware Upgradable 4 CH Network Video Recorder H 1 3 Getting to Know Your Device E Front Panel e PLANET Network Video Recorder NYR 400 Power Button K Unmount Button lal USB Port 1 LED Icons T J _ ltem Description Press to turn on the device Press and hold for about five seconds to turn off Power Button When you press the button to boot the button start blinking Blue and then becomes a steady Blue when the device is ready Press to safely remove the connected USB device on the USB Port 1 Connect the external USB backup device LED Icons The LED icons on the front panel let you know the related stat
4. Network Video Recorder 8 2 3 Connecting the Network Plug an Ethernet cable to the LAN connector located on the device s rear panel and then connect it to the network or directly to a computer for configuration Connecting the LAN cable 2 4 Connecting the Power Adapter Plug the AC power adapter to the power connector located on the device s rear panel and then connect it to your local power supply Connecting the power cable 9 NVR 400 User Guide CHAPTER 3 ACCESSING THE DEVICE 3 1 Accessing the device via My Network Places Since you have built a connection between the Network Video Recorder and your PC you can easily access the device via My Network Places 1 On your PC click Start gt My Network Places MY rictures A w Paint ey My Music E d My Computer wy MSN Explorer K My Network Places windows Media Player g Control Panel 33 Windows Messenger vA Connect To gt prd 1 2 Printers and Faxes Help and Support po Search I Run ES j Log Off fo Turn OFF Computer gt All Pro 2 Find the device with its device named such as NVA 400 in My Network Place File Edit view Favorites Tools Help Bi P Search Folders si I 7 Address My Network Places Local Network Network Tasks E NVR 400 gt Add a network place view network connections Zn Setup a home or small office network 3 Double clic
5. Workgroup Enter the workgroup name where the device is installed within your network WINS Server WINS Windows Internet Name Service server is used to support NetBIOS over TCP IP NetBT Enter the IP address of the WINS server in the box otherwise you cannot connect to a remote network resource by using its NetBIOS name 29 NVR 400 User Guide FTP Windows Os UPnP Media Server iTunes Server USB Printer Start FTP Service Status Disabled FTP Port Use transmisson limitation Maximum Upload speed per client KB s 0 is unlimited Maximum Download speed per client KB s 0 is unlimited Apply This sub menu contains the options that allow you to enable disable the FTP service of the device Start FTP Service select this option to enable the FTP server of the device Once you start the FTP service you should assign the FTP Port the default is port 27 User transmission limitation Specify the maximum upload and download speed KB s by entering the proper values in the related boxes E UPnP Media Server WindowsOS FIP iTunes Server USB Printer UPnP Media Server Start UPnP Media Service Path Apply The device supports UPnP Universal Plug and Play and port auto mapping function so that you can access the device if it is behind an NAT router or firewall Select this option to enable the UPnP media server and then assign the Path from the list 4 CH Network Video
6. 0 Gateway 192 168 0 254 DNS1 192 168 200 3 DNS2 NTP Server Time Zone Taipei Disk Information Disk 1 Hitachi HCS 21616PLA380 51 C 149 4 F 164 6GB Normal This sub menu displays the firmware version of the device the networking information the time zone and the disk information m Log Summary Status Gan Retes This sub menu displays the events log recorded by the system 4 CH Network lVideo Recorder 18 4 2 2 System Hetworkieg Commesicsiios Clause amp Wizard Time Notification Configuration Firmware System Information System Hostname NVR 400 Start UPnP Network Service luseproxy P OZ pan TCP IP Setup Storage Setup Authorization Setup T 5 7 Schedule Download DHCP Logout Static IP IP Address 192 168 o 100 elp SubnetMask 255 255 255 o English Gateway 192 468 0 253 DNS1 e8 gs LU 4 U 4 DNS2 o 9 0 U 9 Link Status Speed 100Mb s Duplex Full MTU 1500 Apply The System menu contains the basic system settings for the device such as the networking settings time and date setup etc R Lan Time Notification Configuration Firmware AN Setup Hostname NVR 400 Start UPnP Use proxy IP Port CP IP Setup DHCP Static IP IP Address 192 168 0 100 SubnetMask 255 255 L 255 0 G
7. 168 0 100 System Authorization Setup L d System Time Monday Feb 16 09 48 51 2009 Network Service s Service Information NVR N E a K UPnP Enabled Schedule Download 4 FTP Server Enabled T x N Logout UPnP Media Server Enabled iTunes Server Enabled Help English Web Configuration Utility of the device 4 CH Network Video Recorder 14 4 1 Using the Setup Wizard The devices Setup Wizard lets you configure your device easily and quickly The wizard will guide you through the necessary settings step by step To start the wizard click Setup Wizard in the menu bar Step 1 LAN Setup Step Step3 Step4 Step 5 Hostname NVR 400 E Start UPnP 7 E C Use proxy IP Port Next Enter the Hostname for the device Select Start UPnP to enable the devices Universal Plug and Play function If your network uses a proxy server select Use proxy and enter the IP Port values Step 2 TCP IP Setup Step 1 m Step3 Step4 Step 5 CP IP Setup DHCP Static IP IP Address 192 168 0 100 SubnetMask 255 255 255 0 Gateway 1492 168 0 254 DNS4 492 168 200 3 DNS2 0 LI 0 LI 0 L o Speed 1000Mb s Duplex Full MTU 1500 Back Next 6 Select DH
8. 8 0 100 Fie Edit View Q Back v wi P Search Key Folders E Favorites Tools Help Address 2 11192 168 0 100 cam 192 168 0 34_80 Name Size Type Date Modified Duration Dimensions A Video Tasks A 2009 02 18 22 24 38 51 893KB VLCmediafile avi 2 18 20096 49AM 0 25 20 640 x 480 2009 02 18 23 00 01 51 889KB VLC media file avi 2 18 20097 24AM_ 0 25 19 640 x 480 E Play all 2009 02 18 23 24 42 51 888 KB VLC media file avi 2 18 20097 49AM 0 25 18 640 x 480 S Copy all items to CD 2009 02 19 00 00 02 51 889KB VLC media file avi 2 18 20098 24AM 0 25 21 640 x 480 2009 02 19 00 24 44 51 894KB VLC media file avi 2 18 20098 49AM 0 25 21 640 x 480 2009 02 19 01 00 02 51 893KB VLC media file avi 2 18 2009 9 24AM 0 25 23 640 x 480 File and Folder Tasks 2009 02 19 01 24 47 51 890KB VLC media file avi 2 18 20099 49AM_ 0 25 23 640 x 480 l 2009 02 19 02 00 02 51 895KB VLC media file avi 2 18 2009 10 24AM 0 25 24 640 x 480 2 Make a new folder 2009 02 19 02 24 48 51 892 KB VLC media file avi 2 18 2009 10 49AM 0 25 26 640 x 480 9 Publish this folder to the 2009 02 19 03 00 02 51 891 KB VLC media file avi 2 18 2009 11 24AM 0 25 26 640 x 480 2009 02 19 03 24 50 51 893KB VLC media file avi 2 18 2009 11 49AM 0 25 29 640 x 480 2009 02 19 03 49 40 21 699KB VLC media file avi 2 18 2009 12 00PM _ 0 10 39 640 x 480 Other Places 2009 02 19 04 00 02 51 893KB
9. 8 0 100 NVR 400 00 30 4f00 21 de Display the connected device s Double click to link the device Networking amp Communication 2 About Link Change IP Search ext Ne Click About to get the Version information of IPFinder Click Link to connect the selected device via Web browser Click Change IP to modify the IP address of the selected device Click Search to find the IP address of the connected device s Click Exit to close the utility sTo NVR 400 User Guide CHAPTER 4 CONFIGURING THE DEVICE You can easily access and manage the Network Video Recorder via the Web browser of your PC This chapter describes the Web Configuration Utility and guides you through the configuration of the device since the default configuration of the device is DHCP mode enabled you are recommended to use IPFinder to search the IP address that is assigned to the device by the DHCP server and then click Link to access the camera via the Web browser Login the Homepage The Web management allows you to access and manage the Network Video Recorder easily Launch the Web browser and then enter the IP address The default IP address is 192 168 0 100 And fill the User Name and Password to login the Web management The default User Name Password is admin admin IVR USER LOGIN User Name Password Teg 1 NVR 400 E i System Information Status Log Storage Setup Hostname NVR 400 IP Address 192
10. Add Edit Delete You can then change the configuration of the camera by selecting it from the list and then clicking Edit To remove a camera select it and then click Delete 33 NVR 400 User Guide R Quad View were Co e we te e http 192 168 200 107 nv1 quad _viewlE php En lt mr In the Quad View screen you can view the live video from the connected camera You can view up to four cameras simultaneously 4 2 7 Schedule Download Q PLANET p System Information Status Download Path Storage Setup Authorization Setup Refresh Add Delete Network Service Schedule Download English A A X Z 3 gt S amp N Q a S G S X x ye The Schedule Download menu allows you to set up download schedule Click Add and the following setup window will appear Schedule Download Login Anonymous N Username Please input the file name Password URL Please input file name Save To alan v When Date 2008 1 1 v Time 0 7 0 Backup None Every Day Every Week MON lt Even Moni 1 v Time 0 7 0 v Apply 6 Login Select Anonymous or Account from the list according to the settings of the target server If you have to select Account to login you should enter the correct User name and Password e URL Enter the URL address of target server Save To Assign the destination folder from the list to save the downloaded files 6 When From the Date and Time settin
11. CP when your network uses the DHCP server or select Static IP to assign the IP address for the device directly For more information of TCP IP settings refer to the Lan section in Web Configuration Utility 15 NVR 400 User Guide Step 3 Set up Space Type NOW LOCATION Wizard Storage Setup Stepi Step m Step4 Step 5 Single Disk Select Single Disk or RAID for storing the files For more information of space type refer to the Storage Setup section in Web Configuration Utility Step 4 Setup Summary NOW LOCATION Wizard Summary Stepi Step Step P Step 5 Setup Summary Hostname NVR 400 UPNP Disable Proxy None DHCP Disable IP 192 168 0 100 Subnet Mask 259 255 255 0 Gateway 192 168 0 254 DNS1 192 168 200 3 DNS2 0 0 0 0 Space Type Single Disk Back Apply Display the configuration of the device When you complete the Setup Wizard click Apply to reboot the device Otherwise click Back to go back to the previous step s and change the settings 4 CH Network Video Recorder 16 4 2 Using the Web Configuration Utility After completing the Setup Wizard and rebooting the device you can start to use the Network Video Recorder within your network environment However you can configure the advanced settings through the Web Configuration Utility The utility contains the following options in the menu bar System Information System Storage Setup Authorizat
12. Recorder 30 R iTunes Server Tunes Server Start Tunes Service Path Use Password Apply The device features an iTunes Server It provides the ability to share files to the computer on the local network running iTunes If the function is enabled the device will be automatically detected in the iTunes program and the files contained in the specified directory will be available to stream over the network select this option to enable the iTune server and then assign the Path from the list You can also set up the Use Password to avoid unauthorized access 8 USB Printer only when an USB printer is connected USB Printer Management Manufacturer Product Name Class When you connect an USB printer to the USB Port 2 of the device this sub menu displays the information of the USB printer 21 lt NVR 400 User Guide 4 2 6 NVR E TS DPLANET a e Wizard Quad View System Information System Cam Name Camera IP Schedule Storage Setup Authorization Setup Auto Add Add Edit Delete Network Service Logout Help o La D D D lt 2 ES y D a English The NVR menu allows you to add Internet cameras and view the live video IP Camera Backup Cam Name Camera IP Schedule Auto Add Add Edit Delete Click Auto Add to add the camera automatically or click Add and to add the camera manually through the following setup window IP Camera Backup Job Se
13. Tien Taipei Taiwan R O C is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility 89 336 EEC 92 3 1 EEC 93 68 EEC For the evaluation regarding the Electromagnetic Compatibility the following standards were applied EN 55022 2006 EN 61000 3 2 2006 EN 61000 3 3 1995 A1 2001 A2 2005 EN 55024 1998 A1 2001 A2 2003 IEC 61000 4 2 1995 Al 1998 A2 2000 IEC 61000 4 3 2006 IEC 61000 4 4 2004 IEC 61000 4 5 2005 IEC 61000 4 6 2007 IEC 61000 4 8 1993 Al 2000 IEC 61000 4 11 2004 Responsible for marking this declaration if the Manufacturer U Authorized representative established within the EU Authorized representative established within the EU if applicable Company Name Planet Technology Corp Company Address TIE No 96 Min Chuan Road Hsin Tien Taipei Taiwan R O C Person responsible for making this declaration Name Surname John Sung Position Title Product Manager Taiwan 27 Feb 2009 Ss paii Place Date Legal Signature PLANET TECHNOLOGY CORPORATION e mail sales planet com tw _ http www planet com tw 11F No 96 Min Chuan Road Hsin Tien Taipei Taiwan R O C Tel 886 2 2219 9518 Fax 886 2 2219 9528
14. VLC media file avi 2 18 2009 12 24PM 0 25 31 640 x 480 2009 02 19 04 24 55 51 894KB VLC media file avi 2 18 2009 12 49PM_ 0 25 32 640 x 480 9 192 165 0 100 2009 02 19 05 00 02 51 895KB VLC media file avi 2 18 2009 1 24PM 0 25 33 640 x 480 9 My Computer 2009 02 19 05 24 56 51 895KB VLC media file avi 2 18 2009 1 49PM_ 0 25 33 640 x 480 My Network Places 2009 02 19 06 00 01 51 897 KB VLC media file avi 2 18 2009 2 25PM_ 0 25 38 640 x 480 2009 02 19 06 25 00 51 895KB VLC media file avi 2 18 20092 49PM 0 25 34 640 x 480 z 2009 02 19 07 00 03 51 897 KB VLC media file avi 2 18 20093 25PM 0 25 38 640 x 480 2009 02 19 07 25 02 51 896 KB VLC media file avi 2 18 20093 49PM 0 25 36 640 x 480 2009 02 19 07 49 58 21 001 KB VLC media file avi 2 18 2009 4 00PM 0 10 21 640 x 480 2009 02 19 08 00 02 51 884KB VLC media file avi 2 18 2009 4 24PM 0 25 09 640 x 480 2009 02 19 08 24 32 51 880KB VLC media file avi 2 18 2009 4 48PM 0 25 00 640 x 480 2009 02 19 09 00 02 51 874KB VLC media file avi 2 18 20095 24PM_ 0 24 48 640 x 480 2009 02 19 09 24 12 51 877 KB VLC media file avi 2 18 20095 48PM_ 0 24 54 640 x 480 2009 02 19 09 48 26 51 516KB VLC media file avi 2 18 20095 59PM 0 11 30 640 x 480 2009 02 19 10 00 01 51 459KB VLC media file avi 2 18 20096 09PM 0 09 22 640 x 480 2009 02 19 10 09 09 51 458KB VLC media file avi 2 18 20096 18PM 0 09 21 640 x 480 2009 02 19 10 18 15 51 459KB VLC med
15. ateway 192 168 0 254 DNS1 192 168 200 3 DNS2 ink Status Speed 1000Mb s Duplex Full MTU 1500 Apply 19 NVR 400 User Guide 6 LAN Setup Hostname Enter a descriptive name for the device Start UPnP The device supports UPnP Universal Plug and Play which is a set of computer network protocols that enable the device to device interoperability In addition it supports port auto mapping function so that you can access the device if it is behind an NAT router or firewall Select the Enable option to enable this feature Use proxy If your network uses a proxy server select the Use proxy option and then enter the IP Port values TCP IP Setup DHCP Select this option when your network uses the DHCP server When the device Starts up it will be assigned an IP address from the DHCP server automatically Static IP Select this option to assign the IP address for the device manually You can use IPFinder to obtain the related setting values IP Address Enter the IP address of the device The default setting is 192 168 0 100 Enter the Subnet Mask of the device The default setting is 255 255 255 0 Gateway Enter the default Gateway of the device The default setting is 192 168 0 254 DNS 1 2 DNS Domain Name System translates domain names into IP S i Enter the Primary DNS and Secondary DNS that are provided by ISP 6 Link Status Display the connection status of the device E Tim
16. cam 192 168 0 35_80 cam 192 168 0 36_80 cam 192 168 0 60_80 http 192 168 0 100 storage file_manage php path volume1 cam 192 168 0 60_80 S cam 192 168 0 34_8 Size 4096 4096 4096 4096 8192 4096 4096 m Last Modifytime Authorization 2009 02 19 19 59 2009 02 19 20 00 2009 02 19 20 00 2009 02 19 15 44 2009 02 19 15 00 2009 02 19 22 18 2009 02 19 21 17 NVR 400 Disk Space USBDisk ShareFolder olumel drawwa C drana C drawwa C drwxrwxnwx C drwxrwoxnwx C drwxrwxnwx C drwxrwxnwx C 5 c Paint v Links 6 Click the link of camera for listing the records You can delete the recording files here only 2 http 192 168 0 100 3 http 1 92 168 0 100 storage file_manage php path volume1 cam 192 168 0 34 80 Microsoft Internet Explorer File Edit Q Back gt x a Le P Search 5 Favorites E 2 ee View Favorites Tools Help ER Address Done T Network Service anana ities ree Schedule Download oe fs STT Hetwortieg 4 Conmonicatios System Information Storage Setup eee Authorization Setup w NMH Logout Help English S cam 192 168 0 34_8 A1 http 192 168 0 100 storage file_manage php path volume1 cam 192 168 0 34_80 a iil a Disk Bi Space USB Disk Share Folder Path volu
17. ce lets you start using your device without problem The device can be set up easily and work within your network environment instantly Chapter 4 Configuring the Device guides you through the configuration of the device using the Web browser on your PC Appendix Provides the specifications of the device NOTE The illustrations and configuration values in this guide are for reference only The actual settings depend on your practical application of the device 4 CH Network Video Recorder 2 D2 Table of Contents Sa ee cece es reese acer daet pone eee ae eee eed at E eels ae EE EE 2 CHAPTER 1 INTRODUCTION TO YOUR DEVICE 4 BS CHECKING THE PACKAGE CONTENT Sras rn E EE tara E E EENS 4 1 2 FEATURES AND BENEEITS e 4 1 3 GETTING TO KNOW YOUR DEVICE sc 1 1 i 5 CHAPTER 2 HARDWARE INSTALLATION 7 2 1 NETWORKING APPLICATION e e 7 2 2 INSTALLING THE HARD DISK DRIVE e e eee 8 2 2 CONNECTING THE NETWORK e ae tee cla ts et tans lah tl te atc tel Ngee ee iad 9 2 4 CONNECTING THE POWER ADAPTER ee 9 CHAPTER 3 ACCESSING THE DEVICE 10 3 1 ACCESSING THE DEVICE VIA MY NETWORK PLACES ecececececececeeeceeeeeeaeeeaeaeaeaeaeaeeeenaeanenenataes 10 E CS SC eal Oe R RC nm ne oe oe aT ee ee 11 CHAPTER 4 CONFIGURING THE DEVICE 14 Ve SIN Gy THE SETUP WIZARD T 15 4 2 USING THE WEB CONFIGURATION UTILITY e 17 APPEND TTT 38 SPECIFICATIONS eR ee ee ne A UN Oe CPN SEO enn Cr Oe AO RE Ee ETC NO Pe an er 38 HOW TO FAST
18. ct User dmi X Authorization Setup ae User Description f Storage Setup Network Serice Password dg Confirm Password Schedule Download Permission Space Status Help Space Used Capacity Quota lt 0 is no limit gt AAC c 1 0 MB Limit English Add Edit Delete The Authorization Setup menu allows you to manage the users and groups of the device E User Select User admin v User Description Password Confirm Password Permission Admin Space Status Space Used Capacity Quota lt 015 no limit gt 1 0 MB Limit MB Add Edit Delete Click Add and then assign the user name in the Select User box and give a brief instruction in the User Description box lf you have set up groups for organization you can assign the user to a group from the Group list Enter the password twice for the new user in the Password and Confirm Password boxes and then select the Permission type Admin or User Specify the storage quotas for the user from the Quota option of Space Status When completed click Apply to add the user You can change the user s setting by selecting the user and then clicking Edit or remove the user by selecting the user and then clicking Delete NOTE Please remember to reboot your device when you clicked Apply buiton OT NVR 400 User Guide E Group User Authorization Group Setup vv Select Group nvr XL td Member Edit Member Add De
19. displays the firmware version of the device In addition you can upgrade the firmware once you have a latest version of firmware When you are upgrading the firmware make sure that the device is connected to the power source during the process Otherwise the device might be damaged because of failure of upgrading firmware 6 Firmware file Click Browse to find the firmware file and click Update 4 CH Network Video Recorder DD 4 2 3 Storage Setup Q PLANET See Networkin 9 Communication Wizard System Disk Management Disk Model Temperature Capacity Status Space Authorization Setup 4 Hitachi HCS721616PLA380 50 C 147 6 F 164 6GB Normal Network Service NVR 2 PERT EE Schedule Download aS a ae Logout Help English The Storage Setup menu provides the information and controls of the installed hard disk drives including the USB device NOTE You are not recommended to use the USB device as your major storage device E Space Disk USBDisk ShareFolder File Management Storage Space Space v Space Type Total Capacity Available Capacity Space Status Disk Status Add Delete Click Add to configure the storage space on the installed hard disk drives selecting Single Disk or RAID Then click Apply to start making file system 229 a NVR 400 User Guide Disk Space USBDisk ShareFolder File Management Space Add Singl
20. e Lan Notification Configuration Firmware Time 16 57 22 Date 2009 102 1 10 Time Zone GMT 08 00 Taipei v NTP Setup NTP Server Manual Setup Year 2009 Month 02 Day 10 Hour 16 v Minute 57 v Second 22 v Get time from my computer Apply 4 CH Network Video Recorder 2D 6 Time Zone select the proper time zone for the region from the pull down menu 6 NTP Setup select this option and the time will be synchronized with the NTP Server When you select this option you have to enter the IP address of the NTP server 6 Manual Setup Select this option to set the date and time manually Get time from my computer Click the button and the date amp time settings of the device will be synchronized with the connected computer Once you complete the time and date setup click Apply E Notification Lan Time Configuration Firmware Notification Setup SMTP Server F Authorization User ID Password Confirm Password Sender E mail Primary E mail Secondary E mail Test mail Apply This sub menu contains the required settings for e mail notification feature When you complete the settings click Send a test mail to test the related configuration is correct or not Once the device connects to the server successfully click Apply SMTP Server Enter the mail server e g mymail com in the box Then select the Authorization check box and complete the following settings
21. e Disk Progress 0 Apply If you have two hard disks installed in the device you can select a disk configuration for RAID RAID O not recommended Provide data striping RAID1 recommended Provide mirroring over both disks JBOD maximum data storage space Combine both drives in a linear fashion to create one volume When completed the related information of the disks is displayed on the screen USBDisk ShareFolder File Management Storage Space Space Space1 ka Space Type disk Total Capacity 164 6GB Available Capacity 141 3GB Space Status Normal Disk Status Detail Information Add Delete Click Add to add a storage space or click Delete to remove the current storage space NOTE Please remember to reboot your device when you clicked Apply button 4 CH Network Video Recorder 24 E USB Disk Disk Space ShareFolder File Management USB Device Management Share Folder v Manufacturer Device Type Used Available Capacity File System Status Share If you connect an external USB disk this sub menu displays the information of the USB disk To safely remove the connected USB device click unmount from this sub menu The other way is pressing the Unmount button on the front panel of the device for disconnecting the USB Port 1 To reload the information of the connected USB devices click refresh Click format to format the connected USB disk NOTE Please remember t
22. ed as trademarks or registered trademarks by their respective companies WEEE Warning To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment end users of electrical and electronic equipment should understand the meaning of the crossed out wheeled bin symbol Do not dispose of WEEE as unsorted municipal waste and have to E Collect such WEEE separately Revision User s Manual for PLANET 4 CH Network Video Recorder Model NVR 400 Rev 1 0 Part No EM NVR400 a NVR 400 User Guide PREFACE Thank you for purchasing the Network Video Recorder an IP based device that installed on your network which can be managed remotely via the Internet or your LAN Together with the Internet camera the Network Video Recorder allows you to remote access and simultaneous record live video streams The Network Video Recorder is easy to install and use Simply connect it to the router switch within your network and the device will automatically access to the connected camera s by default IP protocol This User Guide provides you with the instructions and illustrations on how to use your Network Video Recorder which includes Chapter 1 Introduction to Your Device describes the components and features of the device Chapter 2 Hardware Installation helps you install the device according to your application environment Chapter 3 Accessing the Devi
23. ereal A 1816295125 expiorer ren Type the name of a program folder document or Internet resource and Windows will open it For you Open 192 168 0 100 OK JN Cancel _ Browse J SRO Si Connecting to 192 168 0 100 User name admin w Password TETT C Remember my password Ca E t 39 A S NVR 400 User Guide 3 After login the share folder will be showed in the window The default folder name of camera is cam ipaddress_port P 192 168 0 100 File Edit C 2 Z Our O d po Search K Folders FE 2 Pines Address W 4 192 168 0 100 My Computer View Favorites Tools Help Recycle Bin Network Tasks 456 LI cam 192 168 0 34_80 TDN E DN S gt K kad G te Add a network place Windows view network connections Explorer Internet Explorer Set up a home or small office network Set up a wireless network for a home or small office View workgroup computers cam 192 168 0 35_80 cam 192 168 0 36_80 Re Printers and Faxes Show icons for networked UPnP devices cam 192 168 0 60_80 Other Places gy Unknown i My Computer My Documents Shared Documents By Printers and Faxes Details E m P 192 168 0 100 23 http 192 168 0 100 4 Click one of the folders to access the recording files The file name of recording files will be YYYY MM DD hh mm ss avi E cam 192 168 0 34_80 on NVR 400 192 16
24. for Planet WYF The InstallShield R Wizard will allow you to modify repair or remove Planet MYR To continue click Next SK L NVR 400 User Guide 5 Fill the customer information and click Next iin Planet NYE InstallShield Wizard Customer Information Please enter your information User Mame Organization PLANET Install this application For Anyone who uses this computer all users only for me PLANETS InstallShield 6 Click Install to begin the installation ie Planet NYE InstallShield Wizard Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation IF vou want to review or change any of your installation settings click Back Click Cancel to exit the wizard Installshield 7 Click Finish to finish the installation 4 CH Network Video Recorder jz Planet NFR InstallShield Wizard ix InstallShield Wizard Completed The InstallShield Wizard has successfully installed Planet MVR Click Finish to exit the wizard lt Back Finish j Cancel ee 8 When you finish the installation you can find IPFinder in Start Menu gt All Programs gt PLANET gt Planet NVR gt IPFinder You can also find the shortcut on desktop as below SL TF Finder 9 Launch the IPFinder the control panel will appear as below o gt IPFinder l Ae _ IP Address Device Name MAC Address _ 192 16
25. g options set up the start up time to download files 6 Backup Enable the backup function of your device by selecting None Every Day Every Week or Every Month as well as the Time When completed click Apply to save this download task to the Schedule List You can delete the download task by selecting it from the Schedule List and then clicking Delete When you change the settings of selected task click Refresh to reload the status of these tasks 35 NVR 400 User Guide 4 2 8 Logout ne NVR 400 f now Locaron ong Authorization Setup Do you want to logout 7 The Logout menu allows you to exit or shutdown the system R Logout Do you want to logout 7 Apply From this sub menu click Apply to exit the Web Configuration Utility and go back to the Login window R Shutdown Logout Shutdown Shutdown Now Reboot Apply From this sub menu you can do one of the following 6 Select Shutdown Now and click Apply to turn off the device Select Reboot and click Apply to reboot the device 4 CH Network Video Recorder 36 4 2 9 Help STT oe Hetworkie g 5 Conmusicatios P 4 P Wizard System Information System Storage Setup System Information System information and Log Summary Status Log Authorization Setup System System Setup TEE EA LAN Wireless Time Notification Configuration Firmware Storage Setup Storage Setup Disk Space USB Di
26. ia file avi 2 18 20096 27PM 0 09 22 640 x 480 2009 02 19 10 27 22 51 459KB VLC media file avi 2 18 20096 36PM_ 0 09 25 640 x 480 2009 02 19 10 36 33 51 460KB VLC media file avi 2 18 20096 45PM 0 09 29 640 x 480 2009 02 19 10 45 47 51 462KB VLC media file avi 2 18 20096 55PM 0 09 32 640 x 480 2009 02 19 1 1 00 02 51 464KB VLC media file avi 2 18 20097 09PM 0 09 34 640 x 480 2009 02 19 11 09 22 51 464KB VLC media file avi 2 18 20097 18PM 0 09 35 640 x 480 51 465 KB MLC media file avi 2 18 2009 7 28 PM 0 09 35 640 x 480 11 45 PM TIP We suggest using VLC player for playing the recording files if you don t have further players which Support codec of avi format 4 CH Network Video Recorder 40 5 You can find the records of recording files via Web browser Go to Storage Setup gt File Management It shows the entire share folders 3 hitp 192 168 0 100 storage file_manage php Microsoft Internet Explorer File Edit Q sad z x a Le E Search Sie Favorites 4 B Z View Favorites Tools Help S A Address http 192 168 0 100 storage file_manage php Q PLANET Hetwortieg Commenicaiion Wizard System Information system Storage Setup Authorization Setup Network Service NVR Schedule Download Logout J Help English Y n Path volume 1 Filename 456 789 cam 192 168 0 34_80
27. ion Setup Network Service NVR Schedule Download Logout and Help Each option provides several related settings in the sub menu area Click the desired option from the menu bar and then select the related setting to set up Q DLST Wetworkle g amp Communication P 4 U E NVR 400 C wz OW LOCATION system information summary System Information Sub menu Status Log System Storage Setup Hostname NVR 400 TT E UE e Authorization Setup IP Address 192 168 0 100 System Time Monday Feb 16 09 48 51 2009 Network Service erd NVR UPnP Enabled Schedule Download FTP Server Enabled O MAAN N Logout UPnP Media Server Enabled ee oe iTunes Server Enabled Help English v 4 2 1 System Information The System Information menu displays the current configuration and events log of the device E Summary Status Log Hostname NVR 400 IP Address 192 168 0 100 System Time Tuesday Feb 10 16 31 45 2009 Service Information UPnP Disabled FIP Server Disabled UPnP Media Server Disabled iTunes Server Disabled This sub menu displays the hostname and IP address of the device the date and time and the network service that you have set up 17 NVR 400 User Guide R Status Summary Log System Information Firmware Version 2 0 4 build 7 MAC Address OO S30 4F 11 11 11 IP Address 192 168 0 100 Subnet Mask 255 255 255
28. k Video Recorder CHAPTER 2 HARDWARE INSTALLATION 2 1 Networking Application The following diagram explains the application of the Network Video Recorder within your network In the illustration below the Network Video Recorder and four Internet cameras are connected to a router switch which minimize the impact of the network traffic for the users within the network ee V e VV lt lt lt lt lt lt lt lt lt lt lt lt lt lt lt V lt lt QV 1 lKXKXxV l E i Internet aar Printer ICA M220 prem oaese T UTE IES az ge e EJ iro Z 46H HZ1 pn Network Video Recorder in your networking environment zia NVR 400 User Guide 2 2 Installing the Hard Disk Drive 1 Disconnect the power cable of the device 2 Remove two screws on the rear panel and then remove the rear panel a 3 Pull the disk tray out until it jammed in the rack 4 Place the hard disk drive on the tray and then secured the screws on both side NOTE While placing the hard disk drive onto the tray align the screw holes on the bottom of hard disk drive with the studs on the base of tray The two studs are designed to ensure the hard disk drive will be installed on the bracket securely 5 Push the tray into the disk bay all the way until it connects the device 6 Replace the rear panel and secure two screws 4 CH
29. k the device icon When the login window appears enter the User name the default is admin and password the default is admin and then click OK to access the Network Video Recorder Connect to 192 168 0 20 N Heliaz User name Password _ Remember my password 4 CH Network Video Recorder s 10 3 2 Using IPFinder The device comes with a conveniently utility PFinder which is included in the Installation CD ROM allowing you to search the device on your network easily The following instructions are how to install the IPFinder software 1 Insert the bundled CD ROM into your computer s CD ROM Drive to initiate the Auto Run program It will show you a web page 2 Click the IPFinder hype link to install this utility If you don t see the web page you can find the PFinder in F utility IPFinder suppose F is your CD ROM 3 If you didn t install Net Framework 2 0 before it will help you install first InstallShield Wizard Preparing to Install Planet NR Setup is preparing the InstallShield Wizard which will guide you through the program setup process Please wait InstallShield E k 2 Planet NYE optionally uses the Microsoft R NET 2 0 Framework Would you like to install it now 4 When you complete installing NET Framework you will continue to install the IPFinder Please click Next je Planet NFE InstallShield Wizard Welcome to the InstallShield Wizard
30. lete Click Add and then assign the group name in the Group Name box and then you can add remove users for the group from the Member option User Group Authorization Group Edit _ Group Name nvr Member Group Member User admin ZE lt lt Remove Apply When completed click Apply to add the group To organize the users for the group click Edit Member To remove the group select it from the list and then click Delete R Authorization Authorization Setup Select Share Folder No Share Folder v Apply This sub menu displays the assigned access rules and quotas of the users and groups 4 CH Network Video Recorder 28 4 2 5 Network Service QPLANET Sae cranne Hetwortieg amp Commenicatios m P MC NVR 400 Wizard 9 lt System Information FIP UPnP Media Server Tunes Server USB Printer System aE Storage Setup Authorization Setup Topp Workgroup Network Service WINS Server NVR a Schedule Download Appl T Logout a E a Help English 8 Windows Network Setup The Network Service menu allows you to set up the network services for the device such as FTP server UPnP media server etc R Windows OS FTP UPnP Media Server iTunes Server USB Printer Windows Network Setup Workgroup Workgroup WINS Server Apply 6 Windows Network Setup
31. me 1 cam 192 168 0 34_80 Filename 2009 02 18 20 32 21 avi 2009 02 18 20 56 11 avi 2009 02 18 21 00 01 avi 2009 02 18 21 1 7 20 avi 2009 02 18 21 41 54 avi 2009 02 18 22 00 03 avi 2009 02 18 22 24 38 avi 2009 02 18 23 00 01 avi 2009 02 18 23 24 42 avi 2009 02 19 00 00 02 avi 2009 02 19 00 24 44 avi 2009 02 19 01 00 02 avi 2009 02 19 01 24 47 avi 2009 02 19 02 00 02 avi 2009 02 19 02 24 48 avi 2 http Size 53111356 8522192 34407360 53129744 39409082 53130870 53137906 53133610 53132420 53134198 53138772 53137916 53134966 53139480 53136602 NVR 400 Yolumel Last Modifytime Authorization 2009 02 19 20 56 2009 02 19 21 00 2009 02 19 21 15 2009 02 19 21 41 2009 02 19 22 00 2009 0219 22 24 2009 02 19 22 49 2009 02 19 23 24 2009 02 19 23 49 2009 02 19 00 24 2009 02 19 00 49 2009 02 19 01 24 2009 02 19 01 49 2009 02 19 02 24 2009 02 19 02 49 ranana C rarara C raxrara C ranar C nanara C raraxra C raxrarw C nwxrwxnw C raran C raxna C manara C ranana C ranar C ranar C rarara T v Internet ull 11 48 PM NVR 400 User Guide gt PLANET Networking amp Communication EC Declaration of Confomi For the following equipment Type of Product 4 Ch Network Video Recorder Model Number NVR 400 Produced by Manufacturer s Name Planet Technology Corp Manufacturer s Address 11F No 96 Min Chuan Road Hsin
32. ned in this User s Manual PLANET makes no commitment to update or keep current the information in this User s Manual and reserves the right to make improvements to this User s Manual and or to the products described in this User s Manual at any time without notice If you find information in this manual that is incorrect misleading or incomplete we would appreciate your comments and suggestions FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the Instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CE mark Warning The is a class A device In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Trademarks The PLANET logo is a trademark of PLANET Technology This documentation may refer to numerous hardware and software products by their trade names In most if not all cases these designations are claim
33. o reboot your device when you clicked apply button 25 NVR 400 User Guide R Share Folder Disk Space USBDisk File Management Share Folder Setup Share Folder Comment Authority Volume Add Edit Delete This sub menu allows you to specify the shared folder of the disks Click Add and then assign the destination folder from the Share Folder list and give a brief instruction in the Comment box The Authority option allows the administrator to limit the usage of the shared folder Select the authority type Read Write or Read Only from the list to meet your need Finally assign the storage location from the Volume list When completed click Apply to add the folder that you assigned You can then use the File Explorer on your PC to check the folder that will be displayed as the directory under the device name To change the setting select the folder from the Share folder list and then click Edit To remove select it and then click Delete NOTE Please remember to reboot your device when you clicked Apply button E File Management Path volume1 Back Volume1 v Filename Size Last Modify time Authorization Delete This sub menu displays the log of file system that you have made in the device 4 CH Network Video Recorder 26 4 2 4 Authorization Setup hela V NVR 400 wizad NOW LOCATION Authorzation User System Information Group Authorization System a Sele
34. sk Share Folder File Management Schedule Download Authorization Setup User and Share Folder Authorization Setup Group Authorization Logout Network Service Network Service Fiat Windows OS FTP UPnP Media Server iTunes Server USB Printer elp NVR NVR Setup IP Camera Backup Quad View 7 English Logout web Ul Logout Logout Shutdown The Help menu displays the information for each setting option of the device Click the topic marked as blue color to link to the corresponding page and view the related information in detail Pann 127 NVR 400 User Guide APPENDIX Specifications OS Embedded Linux Storage Device 2 x 3 5 SATA hard disk HDD Configuration Standard RAID 0 1 and JBOD Network Service TCP IP DHCP DNS HTTP FTP NTP SMTP UPnP Network File Protocol Microsoft Networks CIFS SMB Internet HTTP FTP Web based administration Network Time Protocol Multiple users account E mail notification System log Firmware upgrade File System Tvoe Internal HDD support XFS y yP External USB drive support FAT32 EXT3 IE browser IPFinder utility Multiple Language Yes Management User Interface 4 CH Network Video Recorder 38 How to fast access the recording files 1 Click Start menu gt Run Then fill the UNC of NVR For example Enter to next z xGhariat NG onsole Starion J i L N My computer Nero Onine parade Zj le ad a cycle Bin eth
35. tup IP HTTP Port 80 RTSP Port 554 User ID admin Password Cam Vendor PLANET X Spilt file 10 Space Space 1 v Motion Enable OYes No f l Please enable camera motion detection function first Recycle OYes No Limit Yes Limit 500 MB lt No Next 4 CH Network Video Recorder 32 IP Enter the IP address of the camera HTTP Port Assign the HTTP Port for the camera the default is 80 6 RTSP Port Configure the transmission of streaming data within the network The default RTSP Real Time Streaming Protocol port is 554 User ID Password Enter the user name and password for accessing the camera Cam Vendor Select the manufacturer of the camera from the list Split file When the recorded file is too large use this option to split it by selecting file size Space Specify the storage space for the camera 6 Motion Enable Enable of disable the motion detection of the camera if have Recycle Enable of disable the recycling function when the storage space on the device is full Limit select Yes to limit the recording file by specifying the storage volume from the list Otherwise select No to record without limitation When completed click Next to set up the schedule for using the camera and then click Apply to add it to the list Quad View Cam Name Camera IP Schedule 1 cam 192 168 200 114_80 192 168 200 114 weekly Start Job Auto Add
36. us of your device See the following table for more information of the LED icons logn Deseripion OOOO A steady Green 1000 Mbps or Amber 10 100 Mbps light indicates the device aa is connected to your LAN When it blinks the device is receiving transmitting data from to the network S A steady Green light indicates the hard disk drive is installed in the device A blinking Green light indicates the installed hard disk drive is reading writing data A steady Amber light indicates the hard disk drive is complete full 100 A 1 2 blinking Amber light indicates the hard disk drive is getting full 95 x Q l The LED off indicates no USB devices is connected to the device When you connect the USB device to the device the LED becomes a steady Green light 4 2 When it blinks the device is receiving transmitting data from to the USB device 25 NVR 400 User Guide R Rear Panel DC 12V D Fan and Ventilator 7 z O nan L Reset Reset Ethernet H S ay USB Port 2 Ethernet Description DC 12V Plug the provided AC Power Adapter Ethernet Plug the provided Ethernet Cable to connect to your LAN Press to reset the device Press and hold for about five seconds to resume the factory default configuration Reset USB Port 2 Connect the USB printer non GDI interface Fan and Ventilator Do not block or cover the ventilator for air circulation 4 CH Networ
Download Pdf Manuals
Related Search