inst-140006 - Bruck Lighting
Contents
1. BRUCK LIGHTING SYSTEMS For more assistance with technical questions please call our 15774 Gateway Circle Tustin CA 92780 technical support staff at 714 259 9959 You can also e www brucklighting com contact us by email at info brucklightingsystems com TRACK TEN ART NO al h Yay 140 006bz bronze 72 I BRUCK 140 006mc matte chrome 72 The supports are to be mounted every 36 or 3 ft along the rail IAW _ 140 012bz bronze 144 L O i 140 012mc matte chrome 144 end cap aluminum rod TECHNICAL DATA Description The lightweight Enzis straight track is designed for straight track runs Two aluminum rods in the flexible track hold the desired shape Design Jorg Westerheide Dimensions length 72 or 144 Material PVC braided UGA Supply voltage 12V Current max 25 A circuit Load max 300 W circuit 1 THIS PRODUCT MUST BE INSTALLED BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED IN ACCORDANCE WITH LOCAL NEC CODE 2 The Enzis rail system is not intended for use with a power supply cord or convenience receptacle adaptor This rail system is to be supplied by Bruck Lighting 3 Do not install this rail in damp or wet locations 4 Do not install any part of a rail system less than 5 feet above the floor 5 Do not install any fixture assembly closer than 6 inches from any curtain or similar combustible ma2. rack carefully to avoid damage to the conductive braiding For cleaning the system and its components Switch off power to the system Let it cool down for 30 minutes Use a non abrasive cleaning cloth to wipe track components and fixtures CONTENTS OF DELIVERY via aa lamps with bare hands contaminants reduce the light output 1 track complete with 2 end caps
3. terial 6 Disconnect electrical power before adding to or changing the configuration of the rail 7 Do not attempt to energize anything other than lighting rail fixtures on the rail To reduce the risk of fire and electric shock do not Caution For shortening the track use a Track Cutting Shear 230990 Cut the track carefully to avoid damage to the conductive braiding attempt to connect power tools extension cords appliances and Use planning grid to decide all mounting locations prior to installation the like to the rail 8 This track system MUST BE HARD WIRED For all the wire Mark drill points on the ceiling connections use Listed Wire Nuts 9 Do not connect a rail to more than one circuit unless the rail Drill all holes and mount the ceiling supports is constructed so that it can be used with more than on circuit Check with a qualified electrician Although the rail lighting Refer to the instructions included with the different types of ceiling supports system may seem to operate acceptably a dangerous overload of connectors and other components for further details the neutral may occur and result in a risk of fire 10 Secondary connections must be clean and tight to avoid arcing and overheating 11 Warranty is void in case of unauthorized modifications and or improper use For shortening the track use a Track Cutting Shear 230990 Aluminum rods must be removed prior to cutting Cut the t
Download Pdf Manuals
Related Search