user manual
Contents
1. ELIM IC Strona 11 z 11 USER MANUAL rev 1 0 1 GT300 www elmic pl elmic elmic pl GPS PORTABLE TRACKER2. sky There is metal stuff covered the phone Move away the metal stuff Unable to monitor The called number is not the SOS number Set up SOS number SIM card without caller ID display function Active function of caller ID display can not connect to the network The sheet metal of SIM card is dusty Wipe with a clean wiper Invalid SIM card Contact your operator Out of GSM service area Move back to the GSM service covered area weak signal Try again in a strong signal area can not charge Voltage is out of charging range of charger Change to the proper voltage Use non standard charger Use charger that come with the package Poor contact Check if the plug is in Red LED is continuous dark when charging It is because the battery is used up keep charging after about half an hour the LED will turn on Can not check address information SIM card can not support GPRS functions Please contact the sim card operator to activate GPRS Reply no data please try again all the time Please contact with your distributors It is not a SOS number Please set the number as SOS number Producer Shenzhen Concox Information Technology Co Ltd China www concox cn Concox Importer Przedsi biorstwo Handlowo Us ugowe FENIKS ul S oneczna 110 Nowa Ku nica 42 350 Kozieg owy Poland www elmic pl elmic elmic pl
3. that the terminal battery and the charger become hot e Ifthe red LED is continuously bright it means it is charging If the red LED is flashing slowly then it means it is fully charged WARNING The terminal must be placed in a ventilated place in 0 C 4 C And using the charger your distributor provides is a must Using not certificated charger might cause danger and will be considered against the warranty terms Charger from the manufacturer is recommended Device functions and Parameter setting 1 Settings of APN To set up the APN parameter please send SMS command to the number of device The device will reply OK automatically after setting successfully The SMS command is as following APN APN s name E g APN internet internet is the APN of carrier The device will reply OK if setting successfully Note The APN of some countries have user name and password you may need to send SMS command as following APN APN name user name password e g APN internet CLIENTE AMENA 2 Set DNS Server Please send SMS command to the number of terminal so as to set up the DNS parameter The terminal will reply OK automatically after setting successfully Send SMS command SERVER 1 DNS Port O e g SERVER 1 gt300 goobaby net 8827 0 3 Add Family Numbers via SMS command Add two Family Numbers Send SMS command FN A Phone Number1 Phone Number2 A means add numbers e g FN A 13510 360 1351 85136 Add one F
4. USER MANUAL NAME GPS PORTABLE TRACKER GPS GSM SMS GPRS MODEL ELMIC GT300 PLEASE READ THE INSTRUCTIONS BEFORE USING THE UNIT SAVE IT FOR USE IN THE FUTURE www elmic pl elmic elmic pl Importer ul S oneczna 110 NIP 627 114 97 86 Przedsi biorstwo Handlowo Us ugowe FENIKS Nowa Ku nica 42 350 Kozieg owy REGON 240243739 Cyprian Pawlaczyk Polska Poland Safety Warning AttENLIONS aii tt AA dO OWY wy asy YES 3 Ts AU ENUO A E NN 3 2 Attention for operation of this product ssssscccccceceseesssscsececeseseesussesessessssceasaesessesesecesasaesecscesnecesasaesesseeees 3 3 Oberation aha mdihtENA CE sze zi oO to iii a 3 Product Overview Model GT300 vscscisscosicvezcssadsesvesacsenssvebedscustusencivecseddebacaetedvsbecs adi EE dadza id da RERA 3 TL SCCOSSOLIOCS cid da O AA AA AA Ai E EAER 3 2 ADDEOLORCE ai dro laca aa aa iodo lidia 4 o NN 4 4 Performance parameter e o ii iia ida ida 4 A de leo E AT O 5 Buttons IhST UCUOR A di 5 Cil a kd aa Ez A O 6 41 dastali the SIM COL ici A aida 6 2 POWET ON vicceshossaccdstcsssansoucaestnseas a a a a eaeesdeventonsipacdvdess a e ae 6 3 Charging Dat o ida 6 Device functions and Parameter setting ssssssccccccecesesssssscececessesensnaecececesessensaassesecseseeauanscecseseneeaaaaesseseseeenesasasees 6 1 Settings OF APN O ida 6 2 Set BISON J IRE A Mess E oie oin eniron onarena en aanre 6 3 Add Family Numbers via SMS command s
5. amily Number To add the first Family Number send SMS comman FN A Phone Number1 e g FN A 13510 360 To add the first Family Number send SMS comman FN A Phone Number2 e g FN A 1351 85136 Strona 6z 11 rev 1 0 1 N R www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER 4 Delete Family Numbers via SMS Send SMS command FN D 1 2 D means delete the number 1 2 means sequence numbers OR Send SMS command FN D Phone Number 5 Add delete Family Numbers via platform You can set SOS numbers via the platform when the terminal connects to the platform 6 Call Family Numbers Long press Family Number buttons can call preset numbers Short press SOS button can hang off the call NOTE When the people you call pick up the phone the terminal will vibrate slightly 7 Answer phone calls Short press either one of the Family Number buttons to pick up the call And short press SOS button to reject or end the call Long press either one of the Family Number buttons to turn on the speaker White list numbers can be set via the platform that the distributor provides 8 Set White List Normally the terminal can only answer phone calls from SOS number and Family Numbers It can also receive calls from white list numbers 15 numbers at most on platform 9 Set call reminder mode There are three ways of call reminder mode ringtone vibration and both ringtone and vibration Send SMS command CALLMODE code of ca
6. amount of dust otherwise product failure may be caused 2 Attention for operation of this product e Do not dismantle or remodel this product otherwise damage creepage and electrical fault may be caused to this product e Place tiny metal objects such as drawing pin at a place far away from the speaker As the speaker has magnetic property while working it will attract these tiny metal objects which may lead to personal injuries or damage of the speaker 3 Operation and maintenance e Please keep this product dry as rainwater moisture humidity and liquids or moisture content may contain mineral matters that erode the circuit e Do not keep this product in any place with high temperature As high temperature may shorten the lifespan of electronic device damage the battery and cause deformation or melting of certain plastic parts and components e Do not keep this product in any place with low temperature As when being moved from a place with low temperature to a place with normal temperature it may generate humidity inside which may cause damage of circuit board e Do not attempt to dismantle this product As improper handling by nonprofessional personnel may cause damage of the device e Do not toss knock or shake this product as tough operation mode may damage the motherboard inside the device e Ifthis product is made wet by mistake shut it down remove the battery and restart the product after confirming it complete dry a
7. cnano nono nononnnnnnnnncconnnrnnnnnnnns 9 Mode3 Locating according to command 1sccccesssccecssnsscecsennececsensecessenaececseuececsesuesesseauesesseuesesseauesessenaesessenanteess 9 ADDENAIX AAA e eo 10 Bottery Securities 10 Warranty instructions and Servi s ssrin reni eae E et E a a e roie eai 10 Statement omani orena a ii a a das 10 Tro bleshooting EEEE idas 11 Strona 2 z 11 rev 1 0 1 www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER Introduction Thank you for choosing this GPS Portable Tracker Please read this Manual carefully to fully understand its usage perfect functions and simple operation The Company reserves the right to modify this Manual from time to time without prior notice Before using this product please read these Attentions carefully to ensure safe and proper operation of this product Safety Warning 8 Attentions 1 Attention e Do not place this product on an uneven or unstable table board to prevent failure or damage caused by falling e Only the battery designated by the Company can be used on this product Application of other products may lead to leakage overheating blowout and fire of the battery e Do not crash vibrate or throw device in order to avoid failure and fire e Do not use this product in a place with flammable and explosive gas otherwise product failure and fire may be caused e Do not place this product in a place with high temperature high humidity or large
8. d successfully terminal will reply SMS of an accurate location information If GPS is not located the terminal will send LBS location first And then if GPS located within 5mins the terminal will send another SMS with accurate location e g LBS address information Current location LBS nearby Bao an Road Bao an District Shenzhen Guangdong 22 571 113 876 e g GPS address information Accurate location GPS Bao an Road Bao an District Shenzhen Guangdong N22 57139 E113 87710 Ask for coordinates Send SMS command from SOS number to the terminal WHERE Only Family Number or SOS number can apply for replying longitude and latitude from the terminal If GPS is located it will reply current longitude and latitude information If not located within 5mins it will reply the latest longitude and latitude information e g Lat N22 571285 Lon E113 877115 Course 42 20 Speed 0 0740 DateTime 10 11 23 22 28 51 If GPS is not located at all the terminal will reply after 5mins GPS is failed to locate no data please try again Ask for Google link Send SMS command from SOS number to the terminal URL If GPS is located it will reply google link of current longitude and latitude If not located within 2 mins it will reply google li nk of the latest longitude and latitude e g Google link reply lt DateTime 10 11 23 23 42 51 gt http maps oogle com maps q N22 571490 E113 877103 If GPS has never been located before it will reply SMS a
9. e Button Short press twice in a row to arm the terminal In arm condition short pressing twice in a row will disarm the terminal Via calls Any SOS numbers call the terminal must be the SOS numbers and then end up the call in 10s by the mobile side to arm the terminal The terminal will reply a SMS message OK During arm state any SOS numbers call the terminal must be the SOS numbers and then end up the call in 10s to disarm the terminal If the call does not end up it will enter the monitoring condition Via SMS command Any SOS number can send SMS command 111 to arm the terminal must be the SOS number And it will automatically reply OK if set successfully Any SOS number can send SMS command 000 to disarm the terminal must be the SOS number And it will automatically reply OK if set successfully NOTE When the vibration alarm is off the arm function will not be executed 2 Vibration Alarm When the terminal is in arm state there will be a vibration alarm sent to the SOS numbers in 10s if it detects vibration If the GPS is located the terminal will send accurate address information If GPS is not located the terminal will send LBS address information instead And if GPS is located in 5 minutes later the terminal will send accurate address information e g GPS address information vibration alarm Bao an Road Bao an District Shenzhen Guangdong N22 57139 E113 87710 e g LBS address informati
10. e limited to repair of the defect or replacement the defective part or at its discretion replacement of the product itself 3 Warranty repairs must be carried out by our Authorized Service Centre Warranty cover will be void even if a repair has been attempted by any unauthorized service centre 4 Repair or replacement under the terms of this warranty does not provide right to extension or renewal of the warranty period 5 The warranty is not applicable to cases other than defects in material design and workmanship Statement All rights reserved Author instructions Shenzhen Concox Information Technology Co Ltd Correction ELMIC PHU FENIKS POLAND Strona 10 z 11 rev 1 0 1 www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER Troubleshooting If there is trouble during using the phone please read the solution as follow or contact provider Common problems Causes Solution Bad reception Radio waves can not communicate with device when it is used in a bad signal area like basement or space beside tall building Change to a place with good signal can not switch on No power Change a new battery Cannot make voice monitoring No preset SOS numbers Set SOS numbers SIM card is without Caller ID function Activate the function GPS is not locating Keep the device indoor Locating in open space outdoor Weak GPS signal Keep the upside of the phone face to
11. fter 10mins GPS is fail to locate no data please try again Check platform The terminal will send position information to the platform server timely The user can check the position on the platform The platform website www cootrack com Please contact your dealer for the login methods and operations 8 Reboot the terminal Send SMS command RESET When terminal gets command it will reboot after 1 min Working mode setting Model1 Locating in a regular time interval mode After turned on and sent the first GPS location the terminal will activate GPS in 30mins If located it will send location to platform and turn off GPS automatically If fail to locate then GPS will turn off and send LBS location Send SMS command mode 1 Model2 Locating according to vibration mode default In this mode the terminal will turn on GPS as default If GPS locates the terminal will send first GPS location to the platform If GPS could not locate it will upload LBS location In this mode if the terminal does not detect any vibration GPS will be off And after it detects vibration it will start working again Send SMS command mode 2 Mode3 Locating according to command In this mode the terminal will be in Deep Sleep mode It will not connect with the platform You can send SMS command call to activate checking location function During this mode arm disarm will not be executed It will reply The terminal is in Deep Sleep mode Plea
12. fter 24 hours e Use clean and dry soft cloth to clean the lens infrared lamp and light sensor Warning improper operation will void warranty Product Overview Model GT300 GPS Portable tracker 1 Accessories Device Power cord Charger User Manual Battery Please make sure that all accessories are complete Pictures are for indication and illustration purposes only Strona 3 z 11 rev 1 0 1 8 a z www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER 2 Appearance Power on off SOS button EZ p gt w m Mode button Family Number 1 button Tu aD GSM indicator E S Family Number 2 button Power indicator Offside GPS indicator USB and SIM card slot Front 3 Usage e for person e for bikes e forcars e for vans e fortrucks e for camper e for buses e for motorcycle e for other vehicles 4 Performance parameters Serial Specifications Technical parameters 1 Dimension 73 L x 45 W x 16 H mm 2 Weight 54g 3 Backup Battery 1200 mAh 3 7V 4 Talk Time 7 hours 5 Standby Time 98 hours 6 GSM Frequencies 850 900 1800 1900 MHz 7 GPRS Class 12 8 GPS Channel 20 9 GPS Sensitivity 159dBm 10 Acquisition Sensitivity 144dBm 11 Position Accuracy 10m 12 GSM GPS Antenna Built in design 13 LED Indicator GSM green GPS blue Power red 14 Data Transmit TCP SMS Strona 4 z 11 rev 1 0 1 USER MANUAL GT300 www elmic pl elmic e
13. ll reminder mode Code O ringtone 1 vibration 2 both ringtone and vibration default e g CALLMODE 1 means call reminder mode is vibration 10 Control volume During the call short press Family Number 1 button to turn up the volume and Family Number 2 button to turn down the volume When the volume reaches the limit the button light will be all bright 11 Set SOS Number Add SOS number Via SMS command Send SMS command SOS A number1 number2 number3 A means add number You could set 3 SOS numbers in maximum If set successfully the terminal will reply ok e g SOS A 13510 60 135116 6 136126 8H set all 3 SOS numbers SOS A 13510 60 set the first SOS number SOS A 135116 6 set the second SOS number SOS A 136126 8 set the third SOS number Delete SOS Numbers Send SMS command SOS D 1 2 3 D means delete SOS number e g SOS D 1 means delete the first number SOS D 3 means delete the third number If you do not know the sequence number you can also delete the number by SMS command like this SOS D numberit e g SOS D 135278523604 means delete this SOS number directly It will reply OK if the number is deleted successfully Add SOS numbers via platform You can set SOS number via the platform after activating the terminal Strona 7 z 11 rev 1 0 1 gt a z www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER Operation 1 Arm disarm Via Mod
14. lmic pl GPS PORTABLE TRACKER 5 LED Indicators Status GPS LED Indicator Blue Status Implication Slow Flashing interval 2s Searching GPS signal Slow flashing flash 0 1s after every 3s GPS signal has been acquired successfully Continuously in dark GPS stop working GSM LED Indicator Green Status Implication Flashing flash 1s after every 3s Receive GSM signal normalny Quick flashing interval 0 3s GSM initialization Slow flashing flash 0 1s every 3s GPRS on Line Solid Green Monitor function is activated OFF No GSM Signal SIM card not instaled Power Status Red Status Implication Flashing interval 0 35 Low battery Slow flashing interval 2s Full charge Slow flashing flash 0 1s every 2s Normal operating Solid Red Charging OFF Low battery Power off without battery troubleshot Notice Ignition detection indication three LED indicators take turns flashing Buttons instruction No Button Graphic Function Introduction Operation Function SOS button Long press SOS alarm 1 Short press during calls Hang off Family Number button 1 FS Long press Call T Short press when calls coming Answer in Short press during calls Turn on the volume Long press during calls Change to speaker mode 3 Family Number button 1 Long press Call Short p
15. on vibration alarm nearby Bao an Road Bao an District Shenzhen Guangdong 22 571 113 876 When vibration alarm is on and GPS is located successfully but there is no GPS connection the terminal will send longitude and latitude location to pre set SOS numbers When the GPS is not located and there is no GPRS connection then the terminal will not get any location information so it will send Vibration alarm Please notice To pre set SOS numbers NOTE The interval of vibration alarm could not be less than 5 minutes If could not send messages please check your SIM card balance 3 SOSAlarm Press SOS button for more than 3s to activate SOS alarm meanwhile you could feel the vibration twice and then the terminal will send an address information message to the SOS number If GPS is located the terminal will send accurate address information e g Emergency call LBS Bao an Road Bao an District Shenzhen Guangdong N22 57139 E113 87710 If GPS is not located the terminal will send a LBS location information e g Emergency call LBS nearby Bao an Road Bao an District Shenzhen Guangdong 22 571 113 876 Then it will dial the SOS numbers in cycle if any SOS number answer the call it will stop calling If there s no response after all the number been dialed for three cycles it will stop If the GPS is located but the GPRS connection between the terminal and platform is abnormal then the terminal will reply
16. ress when calls coming in Answer Short press during calls Turn down the volume Long press during calls Change to speaker mode 4 Mode button Short press twice in a row Arm disarm Long press Send location to platform automatically once 5 Power ON OFF Long press Power on off Strona 5 z 11 rev 1 0 1 N E www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER Getting Start Please follow below instructions for ensuring safe and correct use 1 Install the SIM card Turn off the terminal Open the USB rubber plug Put the GSM SIM card in the SIM card slot until you hear the click sound Please turn the terminal off before you remove the SIM card Note Make sure there is enough credit on the SIM card If you will be using the GPRS function you should pay attention to the current SIM card GPRS charge Must turn off the terminal before removing the SIM card Removing SIM card while there is external power supply connected is forbidden 2 Poweron Long press ON OFF button to turn the terminal on off 3 Charging battery When the red LED light is flashing quickly it means the battery is low and needed to be charged in time And please charge before using at the first time e Connect the charger to power e Open the rubber plug e Connect the charger into the USB slot e This process may take 4 6 hours During this period it is normal
17. se wake up Send SMS command mode 3 Strona9z11 rev 1 0 1 gt a www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER Appendix Battery security e Please use the original battery The warranty will be invalid by using any other accessory The manufacturer will not take any responsibility for any damage caused by not using the original battery e The new battery can realize the optimal performance after fully charging for 2 or 3 times e The battery can be used for hundreds of times yet it will wear out eventually When its talking time and standby time shrinks sharply you need a new one e Cut off power supply when not using the charger Don t charge the battery for more than one week since over charging will reduce its using time Do not short circuit the battery with metal stuff such as the key in your pocket Do not bend or open the battery Do not put the battery into water or fire The battery should never be charged at temperature below 0 degrees or above 45 degrees Celsius Warranty instructions and service 1 The warranty is valid only when the warranty card is properly completed and upon presentation of the proof of purchase consisting of original invoice indicating the date of purchase model and serial No of the product We reserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product from the dealer 2 Our obligations ar
18. ssssssccccceseseessnsecesecessscesnscdacsecssuseesssaecesscsesesedansesessceseeceasaesessesees 6 4 Delete Family Numbers via SMS e saaaae ae oaaeaa nawa aaa aaez za degenen nereo ieee cnc Al ecsssscesersecnseesees 7 5 Add delete Family Numbers via platform cccccceeccccessseececeescecnssseessstecstecessssesessesssseesseensecensesecseecensseenanees 7 6 Call Family NUuMberS cocommmoocsocescismisncccaracinoaconannanno no Aige reee Mc PEM ss cesccsscocecsccscessesscences 7 Z Answer PHONE CONS ci tarea 7 TATI E aaa aaa aaa aaa aa EnS 7 9 Set call reminder MOdE mocooconccconncnocconnccnanador Manon coro Weee conca Nana Pawa aaa aaa aaa aa arc r nar or rr ncan oros 7 10 INS AAA A A WE 7 11 NAO POPE A A A WIO 7 01 A AMA A A A 8 o AA A AZ A AAA 8 2 Vibration Alarm cississsccisessecessssosncissseanasss O Mpeg EEE ESETE EREE EEEE EEEE 8 3 SOSAIATM ii A s NOE ad dowod add EETAS 8 E AA E A A 8 5 Low battery Alarm A AA AAA 8 6 VOICE ITA LAA A E A A 9 7 CHECK OCOTIGG O MM E LE AO 9 8 dl BA TS CIEN gM 00 Mgadeenssdhoessssoncessssonsessssnnsecssnnsessennasesseaansessenaasessuaanaeseenansesseaaaasssensasesennaass 9 Working mode AA O MA AAA 9 Model1 Locating in a regular time interval mode ccccsssscccesssecessensececsensececscueeecsenueeesseuesesseauesecsenansessenneeess 9 Model2 Locating according to vibration mode default coooconoccconcconononononnnonan
19. to the SOS with the website of the longitude and latitude information e g SOS lt 01 08 17 36 gt http maps google com maps q N22 577156 E113 916748 If the GPS is not located and the GPRS connection between the terminal and platform is abnormal then the terminal will not able to get the location information It will reply to SOS number SOS Alarm Please pay attention NOTE SOS number needs to be set in advance 4 Geo fence Alarm Geo fence function is off as default You can log in the platform to turn on and set the Geo fence In platform you can set 5 fences in specific area There are go out fence alarm and go in fence alarm When the terminal enters or leaves specific areas it will send alarm to SOS number 5 Low battery Alarm When battery is low the terminal will send SMS to SOS numbers Strona 8 z 11 rev 1 0 1 N E www elmic pl elmic elmic pl USER MANUAL GT300 GPS PORTABLE TRACKER 6 Voice monitor When SOS number sends monitor command MONITOR to the terminal the terminal will reply OK and call the SOS number After the call connected the terminal will enter monitor condition The SOS number can hear the sound around the terminal 7 Check location Ask for address information Send SMS command from SOS number to terminal POSITION After command is sent successfully SOS number will receive an accurate location information Only SOS number can check location of terminal If GPS is locate
Download Pdf Manuals
Related Search