Home

User`s Manual - IngMar Medical

image

Contents

1. The QuickLung Settings window will appear next Using the left lt gt buttons set the QL Model to Adult or Junior Using the right lt gt buttons set the Apnea mode to Enable or Disable When complete press the Mode Select button to continue If Apnea is enabled the Apnea settings window will appear There are three 3 options available for Apnea mode Breaths Seed and NoBr The Breaths and NoBr No Breaths or pauses are based on the set median values and can range from 1 to 99 These values will randomly fluctuate 30 based on the set Seed value The Seed value is a random number generator used to create the The Offset is used to improve accuracy for the desired Tidal Volumes To configure the offset use the lt gt buttons to set the Offset value to zero 0 then press the Start Stop button This places the lift arms at the zero position Increase the Offset value and then press the Start Stop button to verify position of the lift arms The Offset is ideal when the lift arms just touch the underside of the QuickLung Wing When complete press the Mode Select button to continue Press Mode Select to select the Apneusis Rate Volume Hold desired breathing pattern Use the Kussmaul s Rate Volume I E lt gt buttons to adjust breath Biot s fmax Vmax MV settings Press Start Stop to begin Cheyne Stokes Rate Vmax and end a simulation Eupnea Rat
2. e Volume IE Settings Ranges Limits INGMAR MEDICAL www ingmarmed com R 5 R 20 R 50 C 50 C 20 C 10 cmH O L s cmHO L s cmHO L s mL cmHO mL cmHO mL cmHO Max Flow 801m 401m 201m ot Max vol ET Om soome 300ml o Insp 60 75 set 18 60 018 200 720 720 40 60 50 ZO o 30 ranges Seed values can range from 0 to 999 Setting the Seed value to zero 0 forces the Breather to use the set Breaths and NoBr as fixed values Apnea patterns can be repeated as fixed zero Seed value or repeated as random using the same Seed value Breaths and NoBr values NOTE Cheyne Stokes Apnea is When complete press the Mode only relevant for the number of breath pauses NoBr NOTE When Apnea is enabled the letter A appears in the top right corner of the chosen breathing pattern 12 60 18 80 720 600 20 50 50 0 1 9 9 6 0 200 720 Cheyne Stokes 720 Fixed 50 Eupnea 46002 80 720 300 20 8060 Default values in parenthesis fmax Vmax of a group of breaths Contact IngMar Medical Ltd to check for availability of the QuickLung Junior model Select button to continue QuickLung Breather Accessory for the QuickLung Precision Lung Model If Apnea is Disabled OR Apnea Maintenance settings have been adjusted the The device is maintenance free last setup window will appear Please contact IngMar Medical for repair or if you
3. e Breather Wing is not installed on the QuickLung please see Application Note QuickLung Breather Wing Installation pdf QuickLung Breather with Accessories PAGE 3 OF 6 Mechanical Setup Installing QuickLung On the rear of the Breather there is a spring loaded pin used to secure the QuickLung test lung into place Pull and twist the spring loaded pin so that the QuickLung can be installed Set the QuickLung onto the Breather by sliding the front of the lung under the Breather locking brackets and lowering onto the Breather surface Release the spring loaded pin to secure the lung Power the system by connecting the Power Supply to the rear of the Breather and turning ON the switch PMG Option Connect the USB cable to a computer running the A software Connect the flow sensor into the respiratory circuit using the 22mm to 15mm adapter Operational Setup When the system is powered ON the screen will display the IngMar Medical logo and the firmware version PAGE 4 OF 6
4. l incidental or consequential damages or for any liability incurred by buyer to any third party in any way arising out of or relating to the goods PAGE 2 OF 6 Intended Use The QuickLung Breather is the spontaneous breathing option for the IngMar Medical QuickLung It may be used in ventilator management training where the need for a spontaneously breathing respiratory simulator is essential while addressing topics of synchrony patient support and weaning The QuickLung Breather may also be used effectively in ventilator performance verification procedures that require reproducible breath triggers The purpose of the lung simulator within the context of ventilator performance verification is solely to assist in implementing test procedures mandated or recommended by the ventilator manufacturer Principle of Operation The device operates via lift arms that create an inhalation of the attached QuickLung based on programmatically defined patterns The spontaneous breaths may be augmented at any time through the support of a ventilator Each breath pattern can include fixed or random apnea settings The following types of breathing can be simulated Eupnea Shallow breathing Wm Cheyne Stokes Periodic breathing eee Biots Groups of quick shallow inspiration WWW Kussmaul s Deep and labored breathing Apneusis Deep gasping inspiration with a pause SVN at full inspiration Quick Start Setup Procedures If th
5. need replacement parts There are three 3 settings in this window Res Offset and Compl Use the lt gt buttons to set the Resistance and Compliance values to match the QuickLung test lung Technical Data Weight 8 Ibs 4 oz 3 7 kg Dimensions 13 3 x 7 4 x 5 inches 337 x 189 x 127 mm Electrical Input 24 VDC 1 3 2 3 A Power Supply 100 240 VAC 1 5 3 0A Contact Information www ingmarmed com info ingmarmed com User s Quick Reference voice 412 441 8228 toll free 800 583 9910 fax 412 441 8404 PAGE 5 OF 6 PAGE 6 OF 6 Legal Information Product Warranty Products manufactured or distributed by IngMar Medical Ltd are fully warranted covering materials and workmanship for a period of one year from the date of shipment except for products with stated warranties other than one year IngMar Medical reserves the right to perform warranty service s at its factory at an authorized repair station or at the customer s installation IngMar Medical s obligations under this warranty are limited to repairs or at IngMar Medical s option replacement of any defective parts of our equipment except fuses and batteries without charge if said defects occur during normal service Claims for damages during shipment must be filed promptly with the transportation company All correspondence concerning the equipment must specify both the model name and number and the serial number as it appears on the equipment Improper
6. use mishandling tampering with or operation of the equipment without following specific operating instructions will void this warranty and release IngMar Medical from any further warranty obligations The above is the sole warranty provided by IngMar Medical Ltd No other warranty expressed or implied is intended Representatives of IngMar Medical are not authorized to modify the terms of this warranty For factory repair service Call Toll free 1 800 583 9910 International 412 441 8228 Facsimile 412 441 8404 Limitation of Liability IngMar Medical Ltd s liability whether arising out of or related to manufacture and sale of the goods their installation demonstration sales representation use performance or otherwise including any liability based upon above defined product warranty is subject to and limited to the exclusive terms and conditions as set forth whether based upon breach of warranty or any other cause of action whatsoever regardless of any fault attributable to IngMar Medical and regardless of the form of action including without limitation breach of warranty negligence strict liability or otherwise THE STATED EXPRESSED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY FITNESS FOR ANY PARTICULAR PURPOSE OR NON INFRINGEMENT IngMar Medical Ltd shall not be liable for nor shall buyer be entitled to recover any specia

Download Pdf Manuals

image

Related Search

Related Contents

télécharger le règlement - Pecheurs et Plaisanciers Azuréens  Roche volcanique expansée  Leica INM-100 Microscope Extended Depth of Focus Instructions  OK HDD Info 1.0 取扱説明書 © 2006-2010 SOOHO Co  INCUBATOR & ACCESSORY INSTRUCTION MANUAL  Samsung SMART CAMERA ST200F Käyttöopas  Culminating Activity Material  

Copyright © All rights reserved.
Failed to retrieve file