SATA Wire - Apricorn
Contents
1. product until it is received by Apricorn Purchaser should consider obtaining insurance with respect to shipping the product 34 WWwW apricorn com Warranty Conditions Warranty Apricorn offers a 1 year warranty on SATA Wire against defects in materials and workmanship under normal use The warranty period is effective from the date of purchase validated by your original receipt either directly from Apricorn or an authorized reseller Disclaimer and terms of the warranties THE WARRANTY BECOMES EFFECTIVE ON THE DATE OF PURCHASE AND MUST BE VERIFIED WITH YOUR SALES RECEIPT OR INVOICE DISPLAYING THE DATE OF PRODUCT PURCHASE APRICORN WILL AT NO ADDITIONAL CHARGE REPAIR OR REPLACE DEFECTIVE PARTS WITH NEW PARTS OR SERVICEABLE USED PARTS THAT ARE EQUIVALENT TO NEW IN PERFORMANCE ALL EXCHANGED PARTS AND PRODUCTS REPLACED UNDER THIS WARRANTY WILL BECOME THE PROPERTY OF APRICORN THIS WARRANTY DOES NOT EXTEND TO ANY PRODUCT NOT PURCHASED DIRECTLY FROM APRICORN OR AN AUTHORIZE RESELLER OR TO ANY PRODUCT THAT HAS BEEN DAMAGED OR RENDERED DEFECTIVE 1 AS A RESULT OF ACCIDENT MISUSE NEGLECT ABUSE OR FAILURE AND OR INABILITY TO FOLLOW THE WRITTEN INSTRUCTIONS PROVIDED IN THIS INSTRUC TION GUIDE 2 BY THE USE OF PARTS NOT MANUFACTURED OR SOLD BY APRICORN 3 BY MODIFICATION OF THE PRODUCT OR 4 AS A RESULT OF SERVICE ALTERNATION OR REPAIR BY ANYONE OTHER THAN APRICORN AND SHALL BE VOID THIS WARRANTY DOES NOT COVER NORMAL WEAR AND TEAR2. NO OTHER WARRANTY EITHER EXPRESS OR IMPLIED INCLUDING ANY WARRANTY OR MER CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE HAS BEEN OR WILL BE MADE BY OR ON BEHALF OF APRICORN OR BY OPERATION OF LAW WITH RESPECT TO THE PRODUCT OR ITS INSTALLATION USE OPERATION REPLACEMENT OR REPAIR APRICORN SHALL NOT BE LIABLE BY VIRTUE OF THIS WARRANTY OR OTHERWISE FOR ANY INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGE INCLUDING ANY LOSS OF DATA RESULT ING FROM THE USE OR OPERATION OF THE PRODUCT WHETHER OR NOT APRICORN WAS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES Copyright Apricorn Inc 2010 All rights reserved Windows is a registered trademark of Microsoft Corporation All other trademarks and copyrights referred to are the property of their respective owners Distribution of substantively modified versions of this document is prohibited without the explicit permission of the copyright holder Distribution of the work or derivative work in any standard paper book form for commercial purposes is prohibited unless prior permission is obtained from the copyright holder DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS REPRESENTATIONS AND WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT ARE DISCLAIMED EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID www apricorn com 35 APRICORN 12191 Kirkham Road Poway CA U S A 920
3. When the Apricorn CD appears on your desktop double click to open Double click on the SuperDuper dmg icon This will open the package and mount a drive on your desktop Open this drive by clicking on the newly created disk icon The below window will open on your screen SEONG ts SuperDuper z 3 items 1 2 MB available To install or update Drag to Applications and run SuperDuper User s Guide pdf User s Guide To install SuperDuper drag SuperDuper icon to Applications and run Follow the instructions included on the SuperDuper User s Guide to setup www apricorn com 23 After the Clone Once the transfer is complete you are ready to install your new hard drive Turn off the laptop and disconnect the SATA Wire with hard drive Disconnect the Laptop s AC adapter and remove the laptop battery to reduce the risk of damage or electrical shock Consult the Computer s User Manual for instructions on how to remove the Original hard drive from your computer Some laptops may have the disk drive mounted under a cover Other laptops may have the original drive mounted inside a drive caddy to allow quick removal of the drive from the laptop although it might appear that the drive caddy and the SATA Wire drive are not the same once you open up the drive caddy you will find an identical hard drive inside If the hard drive is mounted inside a drive caddy carefully remove the hard drive from the c
4. not installed correctly or there is a resource conflict in the system Use the Windows Add New Hardware Wizard to detect the drive or if the drive has already been installed use the Windows Update Device Driver Wizard Be sure that there are no resource conflicts in the Windows Device Manager before installing the drive What software is included with my SATA Wire PC Software Includes EZ Gig III and SMART ER EZ Gig Ill for Windows is one of the most powerful yet easy to use backup utilities available EZ Gig III is the third generation of the award winning EZ Gig Data Transfer Utility SMART ER polls the S M A R T data from a hard drive giving the user advanced warning of a hard drive failure with a pop up message or e mail to the IT administrator Using less than 1MB of system resources SMART ER also monitors the hard drive free space SMAT ER is compatible with both SATA and PATA IDE hard drives MAC Software Includes ShirtPocket SuperDuper for Mac SuperDuper is the wildly acclaimed program that makes recovery painless because it makes creating a fully bootable backup painless lts incredibly clear friendly interface is understandable easy to use And it runs beautifully on both Intel and Power PC Macs SuperDuper s interface confirms all your actions in simple clear language to ensure that the end result is exactly what you intended www apricorn com 27 10 11 Can I make a clone of my drive and put it in a diff
5. the bootable medium Once you have created you bootable media device click Exit and then choose Start EZ Gig III EZ Gig Ill Create Bootable Media Create Bootable Media You have selected to create a bootable version of EZ Gig Ill CD Floppy disk or USB Thumb Drive select the appropriate drive below and click the Create button D Status Select a destination drive below Floppy drive Drive A x CD DVD writer Drive D Create CD DVD USB medium No dives found Make bootable Exit 10 wWww apricorn com Cloning your hard drive with EZ Gig Ill 1 Click the Let s Get Started button to proceed APRICORN EZ GIG IlI Copy Mode Drive to Source Mot selected Destination Options Cloning as easy as 1 2 3 EZ Gig Ill enables you to copy all of your data settings OS and email from your computer s hard drive to an external hard drive in just three simple steps 2 EZ Gig will then scan for connected drives This may take a few momenis EZ Gig is scanning for connected dives One moment please www apricorn com 11 Selecting the Source Drive Once EZ Gig III has scanned for connected drives you will be asked to select your Source Drive This is the drive you would like to copy from and in most cases is the internal drive in your notebook i NOTE Your computer s internal drive will usually be denoted by the 4 prefix IDE Select t
6. to the Microsoft website with complete instructions for both XP Vista amp 7 4 Follow instructions in the appropriate section of this manual for cloning to create a full bootable backup or just use as an external storage device 24 wWww apricorn com Device Removal Windows Windows 2000 XP Vista and 7 1 NOTE To protect against unexpected data loss Windows checks that all files on the disk are closed before allowing the USB device to be removed If you receive an error message that says The device cannot be stopped right now Try stopping the device again later Close all Windows and Programs Locate the system tray on your Windows Desktop the system tray is the part of the taskbar that displays the date and time Click on the Safely Remove Hardware icon 2000 XP g or Vista 7 in the system tray A dialog box will appear Please note that in Windows Vista and 7 the Safely Remove Hardware icon is different Click Safely Remove Mass Storage Device Drive D in the dialog box Your drive letter may differ Wait for few seconds until the system prompts The hard disk storage device can now be safely removed from the system Click OK and then unplug the SATA Wire The Safely Remove Hardware button is located in the System Tray near the time clock 7 a that are using files from the Drive then repeat the procedure www apricorn com 25 SATA Wire FAQs 1
7. two options 1 If you have EZ Gig IIl on a CD please choose the Start option proceed to page 7 of this manual to continue 2 If you downloaded EZ Gig III from Apricorn s website you can either choose the Start option go to page 11 or create a bootable EZ Gig III CD to use in the future go to page 10 for instructions A Apricorn EZ Gig III Start up Options Welcome Depending on how you received EZ Gig lll you have two options If you have EZ Gig Ill on a CD please choose the Start option If you downloaded EZ Gig III from Apricorn s website you can either choose the Start option or create a bootable CD to use in the future Start EZ Gig Ill Create Bootable CD Quit Program www apricorn com 9 Creating a Bootable EZ Gig III CD If you downloaded EZ Gig III from Apricorn s website you have the option of creating a bootable EZ Gig III CD floppy disk or thumb drive to use in the future To create a bootable media disk follow the appropriate directions below e Ifyou want to create a bootable floppy disk choose the desired drive at Floppy drive and click Create floppy e To create a bootable CD DVD choose the desired drive at CD DVD writer and click Create CD DVD e To create a bootable USB key choose the desired drive at USB medium and click Make bootable Follow the instructions and wait until the installation program reports successful creation of
8. 42MHO80G1GC 76 320 MB Destination 2 Secure HDD 152 Bi Options a Fast on Sate on Verifying on Smart on Copy Data Curre nt sector 61 638 855 i e Elapsed Read errors i lt n oo w Remaining Write errors i Se 6 i nce Data rate verification errors 1 ie gt el Buf fer size Copying sectors 20 WWwW apricorn com Interupting the Cloning Process The cloning process can be stopped at anytime using the Stop button Continue cloning by clicking Continue copying To stop the clone completely select Abort copying Copying interrupted T You can abort the copying process irrevocably The destination medium will not contain a complete copy Aborting the Cloning Process If the cloning process aborted a new clone must be commenced Clone Aborted 5 Clone Aborted The clone process has been aborted by the user t The destination drive will not be bootable Interupting the Verification process If you chose the Verify Copy option before starting the clone EZ Gig III will automatically compare the information on the Source and Destination drives once the clone is complete If this process is interupted or stopped at anytime the aborted verification run will have no influence on the copied data The copy itself is already finished at that point of time When the final report is read EZ Gig III will report that the clone is only partially verified www ap
9. 64 1 858 513 2000
10. Connecting your SATA Wire Device Installation Installing your SATA Wire is easy Simply connect your 2 5 SATA drive to the SATA Wire and connect the SATA Wire to your computer Shown in the figure below Now you can upgrade your notebook drive using the Upgrade Suite CD Instructions for upgrading your Microsoft computer are provided on the following pages If you are upgrading your Mac please refer to page 23 WwWwwW apricorn com 5 Before Running the Software After many years of use hard drives can become cluttered with unusable file fragments and other file system errors Most file system errors are not immediately obvious to the user but can be identified and repaired with a few simple steps Although the steps below are not absolutely necessary to run EZ Gig it s best to try and clean up disk errors BEFORE they are copied over to the new drive Before running EZ Gig III we recommend 1 Clean up any file system errors by running Windows ScanDisk or a similar disk cleanup utility on your internal hard drive Defragment your hard drive using the Windows Disk Defragment Utility or a similar disk defragment utility on your internal hard drive Backup any critical files or data Attach the AC adapter to your laptop and make sure it is not running on battery power Attach the USB cable from your computer to the DriveWire If you plan on running EZ Gig III from the Bootable CD ROM You may need to change your l
11. SATA Wire USB 2 0 TO 2 5 SATA CONNECTOR User s Guide UPGRADE SUITE Attention If your SATA Wire shipped with a previous version of EZ Gig Il you can download the new EZ Gig III from Apricorn s website at http www apricorn com ezgig Review the most current SATA Wire FAQ s at http www apricorn com support php THE LEADER IN PERSONAL STORAGE TABLE OF CONTENTS Getting to know your SATA Wire Introduction The Package Contains System Requirements Connecting your SATA Wire Device Installation Before Running the Software Before running EZ Gig III we recommend EZ Gig III instructions for Windows 7 amp Vista Changing the default Power Options Upgrade Suite CD ROM boot To start EZ Gig III directly from the CD ROM Connecting Your Hard Drive EZ Gig Ill Start Up Options Creating a Bootable EZ Gig III CD Cloning your hard drive with EZ Gig III Selecting the Source Drive Selecting the Destination Drive Speed Test Drive Verification Advanced Options Verify Copy Copy Free Areas SmartCopy Media Direct Dell More Advanced Options FastCopy SafeRescue CachedMemory SharedMemory Animation HotCopy Livelmage Avoid exclusive read access U U AAAA I D O WO CO Partitions Resizing your partitions manually Start Clone Interupting the Cloning Process Aborting the Cloning Process Interupting the Verification process Congratulations your Clone is Complete SuperDuper Ba
12. Why does my new drive or connector look different from my old drive or connector The first thing you need to do is to determine if you bought the right drive There are now two standards for 2 5 laptop hard drives Serial ATA SATA and Parallel ATA PATA Check with your manufacturer for the drive specifications and compare it to the specifications on the drive you purchased All SATA drive connectors should look exactly the same Use Apricorn s hard drive configurator at www apricorn com to make sure you are geiting the correct drive for your laptop or notebook computer What is Serial ATA SATA Serial ATA is the next generation interface for the high speed transfer of data in PCs workstations and laptops SATA allows an increase in bandwidth from PATA s 100 MBps to 150 MBps and higher down the road SATA cable connectors are much smaller than PATA connectors and have no pins to be bent or broken SATA connectors are more stable and require very little pressure to attach the hard drive making them much easier to use than PATA connectors If your laptop requires a SATA hard drive you must replace it with a SATA hard drive Use Apricorn s hard drive configurator at www apricorn com to make sure you are getting the correct drive for your laptop or notebook computer How do format my drive For Windows 2000 and XP cut amp paste or type the URL below into your Internet browser or click the link below http support microsof
13. addy Be careful not to damage the hard drive pins or any custom connectors The hard drive may have a connector covering the pins Please take note of all connectors and their orientation Remove the original drive and replace it with the new one If the laptop drive is mounted inside a caddy install the new drive into the caddy and then insert the assembled caddy back into the computer For specific instructions please refer to your computer s User Manual or manufactures web site Boot the laptop from your new hard drive The new hard drive should boot up as though it was the old drive Using the SATA Wire as a external backup drive WARNING Formatting a Hard Drive will erase everything on the drive Please do not reformat the original drive until you have verified that your new drive is working properly After successfully copying everything over to your new drive the SATA Wire with old hard drive can be used as an external USB backup drive At this point we recommend that you wait until you are certain that your new hard drive is working properly When you are certain that your system is working properly follow these basic steps listed below to use the SATA Wire with old drive as a backup drive 1 Install the old hard drive into the SATA Wire Please refer to Page 5 for hard drive installation instructions 2 Connect the SATA Wire to your system 3 Reformat the old hard drive See FAQ 4 on page 26 of this manual for a link
14. andardized programming interface there are some controllers which have only a proprietary programming interface Connect the corresponding drives to another controller PCI IDE controller Source amp Destination Size Differences Equal Size If source and target are of the same size EZ Gig Ill creates an absolutely identical copy clone On this clone all sectors on source and target from the first to the last sector are 100 identical provided that the process was error free Small to large If the source is smaller than the target EZ Gig III copies only the data that is available on the source This data is copied from the beginning of the source onto the beginning of the target medium The area at the end of the target medium which is larger than the source remains unaffected Apart from that the unaffected area remains possibly unused during a later usage such a copy is usually comparable to a real clone as far as the capacity of use is concerned because the target contains entirely all data of the source wWww apricorn com 31 Large to small If the source is bigger than the target EZ Gig III copies only the data which also fits onto the target This data is copied from the beginning of the source to the beginning of the target medium The data which is larger than the target is not copied and is missing on the target Generally such a copy can only restrictedly be used because possibly necessary data can be missing Howe
15. aptop s BIOS boot order You will find these options inside the laptop s BIOS Boot Option Menu The BIOS Boot Options menu allows the user to select the preferred boot device when the laptop starts up EZ Gig III can boot directly from the CD ROM but you must check the BIOS Boot settings to make sure that CD ROM is higher in the boot order than the C drive www apricorn com EZ Gig Ill instructions for Windows 7 amp Vista Windows 7 and Vista User Account Control helps stop unauthorized changes to your computer The User Account Control window pops up in Administrator Approval Mode whenever a program tries to run on your Windows system When the User Account Control window pops up there will be a warning symbol and message that reads A program needs your permission to continue The instructions will read If you started this program Continue SS E E oil TTF User Account Control x F you started this program continue Apricorn EZ Gig M Setup Apricorn User Account Control helps stop unauthorized changes to your computer Please click the Continue button and proceed to the EZ Gig III Start Up screen Changing the default Power Options Be default the Windows 7 operating system will Turn display off after 20 minutes and Put the computer to sleep after 1 hour of keyboard or mouse inactivity It will take more than 20 minutes to clone most of today s larger
16. ckup Software for Mac After the Clone Using the SATA Wire as a external backup drive Device Removal Windows SATA Wire FAQs EZ Gig lll FAQs Load errors Error 5002 and Disk error Keyboard and mouse General problems Slowed down system Read write and verification errors IDE ATA SATA Hard disk not recognized IDE controller not found Source amp Destination Size Differences Equal Size Small to large Large to small Automatic troubleshooting Intensive reading writing Read errors Write errors Verification errors Contacting Technical Support RMA Policy Warranty Conditions 18 19 20 21 21 22 23 24 24 25 26 29 29 29 30 30 30 30 31 31 31 32 32 32 32 33 34 34 35 Getting to know your SATA Wire Introduction The SATA Wire is perfect for transferring data to bare drives Use it to connect any 2 5 SATA notebook hard drive to your computer With the help of Apricorn s user friendly cloning software you can clone or backup your notebook drive in a snap The Package Contains e USB to SATA 2 5 Cable e Upgrade Suite CD e Apricorn EZ Gig III e ShirtPocket SuperDuper Lite Quick Start Guide System Requirements Hardware Pentium CPU II or Apple G3 or later 128MBs RAM Available USB Port CD ROM or CD RW drive Supported Operating systems Microsoft Windows 7 Vista XP and 2000 Mac OS 9 2 or later OS X 10 2 or later 4 www apricorn com
17. corn com 33 Contacting Technical Support Apricorn provides the following helpful resources for you 1 SATA Wire User s Guide and Quick Start Guide 2 Apricorn s Website http www apricorn com This gives you the ability to check for up to date information 3 E mail us at support apricorn com 4 Or call the Technical Support Department at 1 800 458 5448 Apricorn s Technical Support Specialists are available from 8 00 a m to 5 00 p m Pacific Standard Time from Monday through Friday RMA Policy An RMA Return Merchandise Authorization tracking number must be issued by Apricorn If you need to return or replace your upgrade kit Apricorn requires that you perform the following steps 1 rA Find your original receipt Simply call Apricorn s technical support department with your upgrade kit part number and a description of the problem s you are experiencing If the Apricorn representative finds cause for a return they will issue an RMA number Please write this number down Fill out an RMA authorization form with your package The RMA form is available on line at http www apricorn com support rma php Please send the prepaid package including RMA form and receipt to the following address make sure the RMA is written on the exterior of the package Apricorn RMA _ _ _ 12191 Kirkham Road Poway CA 92064 The purchaser shall be responsible for any loss or damage to the returned
18. erent machine A clone is for disaster recovery purposes i e when your drive fails and you need to get back up and running You should not make a clone of your drive and put it in another or multiple machines There are licensing issues for the software on your machine Is it possible to restore a single file from the clone stored on my old drive Yes EZ Gig III allows you to mount an image as a virtual hard drive You can access this virtual drive as if it were a physical hard drive You would use your Windows Explorer or My Computer and copy the file or folder and paste it on to your hard drive I am unable to format my 80GB or larger EZ Upgrade with FAT 32 in Windows 2000 or XP Windows 2000 and XP limit a FAT32 partition to 32GB If you choose to format the drive in a larger partition you will need to use the NTFS file system 12 Can boot Windows to my USB Device No Because of limitations both hardware and software Windows is currently prevented from booting and running off a USB drive 28 WWwW apricorn com EZ Gig Ill FAQs The below FAQs refer to cloning your hard drive with EZ Gig Ill only For information on issues using Shirt Pocket SuperDuper software for Mac please go the ShirtPocket s website at www ShirtPocket com Load errors During the start of the program before EZ Gig Ill is loaded itself a message and a progress bar will appear on the boot screen In case of an error one of the f
19. g the troubleshooting run the number of the indicated read errors can reduce according to the areas on the source medium which could be recovered NOTE Read errors that occur during the verification run are not counted as read errors but as verification errors Write errors Write errors can only occur during the copying process and only on the target medium EZ Gig III then tries to read the defective areas immediately after the termination of the copying process with the option 32 www apricorn com SafeRescue with the help of special data recovery strategies within a proper troubleshooting run During the troubleshooting run the number of the indicated write errors can decrease according to the areas on the target medium which could be recovered Verification errors When the option Verifying is activated EZ Gig IIl executes a verification run after the copying process A verification error is counted if the data of two sectors on source and target do not correspond Furthermore read errors which occur during the verification run in one or both of the areas to be compared are also counted as verification errors Therefore the number of verification errors gives you absolute information on how exactly source and target correspond to each other after the copying process In case of an error free copying process EZ Gig III should not report any verification errors and signalize a 100 conformity of source and target www apri
20. hard drives If the system goes into display is turned off or the computer goes to sleep during the clone your clone may fail This will not damage your original hard drive in any way but you will have to restart the cloning process To avoid this issue change the default Power Options before starting the backup on Windows 7 Systems From your Window Start menu type Power Options in the Start Search bar and the Power Options program will be listed in the results window Alternately you can go to Start Menu Control Panel Power Options Click on Power Options to launch the program On the left window click on Choose when to turn off display and make the changes as listed below Turn Display Off Never Put computer to sleep Never Once you have completed the clone go to Power Options and restore the default settings www apricorn com 1 Upgrade Suite CD ROM boot Upgrade Suite CD is a bootable disk with EZ Gig III data transfer utility that can copy hard drives without booting to the Windows operating system To use Upgrade Suite as a stand alone utility your Computer must be able to boot from a CD ROM and the CD ROM must be set as the first boot device in your computer s System BIOS NOTE The System BIOS controls basic hardware functions in computer and is the first screen that appears when booting your computer i e before the Windows Startup Logo appears on screen Consult your Com
21. he appropriate drive from the menu and click Next to continue APRICORN EZ GIG Ill Source am 1 THTELSSOS 4 2MHORUGIGE 763520 MB Destination Mot selected Options Mot selected ED Source Drive Select the drive you would like to copy 1 IDE 76 320MB INTEL SSDSAZMHOB0G1GC 2 USB 152 620 HB Secure HDD Speed Test 12 www apricorn com Selecting the Destination Drive Once you have selected your Source Drive EZ Gig will ask you to select your Destination Drive This is the drive you would like to copy to and in most cases is the external drive connected to your notebook s USB port Cy NOTE Your external drive will be denoted by the prefix USB Select the appropriate drive from the menu and click Next to continue APRICORN a EZ GIG Ill Source 1 INTEL S80542MHO80GIGC 76 320 MB Destination lt gt 2 Secure HDD 152 625 MB Options Mot selected Destination Drive Select the drive you would like to copy your data to 1 IDE 76 320 HB INTEL SSDSA2MHOG0GIGC C unnamed NTFS 76 239 MB H 2 USB 152 628MB Secure HOD F Secure HDD HTFS 152 626 MB Speed Test Speed Test Speed Test Click the Speed Test icon Drive 2 U3 Cruzer Micro 1 908 HB on either the Source or Destination drive for an estimate of the drive s read speed 23 308 KB s E The speed listed abowe is the estimated read speed The write speed depends on addi
22. ix this problem by changing activating or deactivating depending on the current setting the emulation for PS 2 devices in BIOS www apricorn com 29 setup Please consult your computer manual on how to change this setting since it may be named differently according to the respective BIOS In most of the cases you can find it under the name USB Legacy Support or USB Keyboard Support often under Integrated Peripherals or Advanced Options NOTE In some of the cases problems with the PS 2 keyboard and or mouse occurred with an activated emulation for PS 2 devices If you do not use any USB input de vices please switch off the PS 2 emulation in the BIOS setup General problems Slowed down system If you think the speed of the total system or the copying speed also with IDE and SCSI devices is too slow a USB controller can be the cause even if it is not used Read write and verification errors If EZ Gig Ill reports errors these are usually defective areas on the respective medium However general problems with the hardware can possibly also cause putative read and write errors This is mostly noticeable by a very high number of displayed errors First of all try to fix the problem via the help instructions for the respective hardware types IDE SCSI USB because the causes are usually found there If the problems cannot be fixed this way either deactivate step by step the following options at best in the indicated o
23. ngs Partitions eit Cone o je oes Jerity copy For optimal compatibility EZ Gig can adjust some E copy free areas partition data automatically You can also choose manual adjustment or opt for no changes SmartCopy on logical 1 1 copy 7 accelerated cloning A Reset Default Close Window Apply Changes A A Automatic ally M Manually Wi No Changes General Source Target FastCopy Bi IRG irc SafeRescue E ora E i CachedMemory GB Read ahead E Read ahead SharedMemory E rite cache Write cache Animation E Multisector PIO E Multisector PIO HotCopy Livelmage MB Recovery via PIO Recovery via PIO C Avoid exclusive read access J Cooling phase E Cooling phase FastCopy Special copy algorithm Can increase the regular copy speed up to double SafeRescue Special algorithm for data recovery Tries to recover as large areas on the drive as possible Can also stay turned on for normal copies CachedMemory Use fast intermediate memory SharedMemory Use fast data transfers Animation Switch off copy animation may lead to a slight speed increase 16 www apricorn com HotCopy Livelmage Allows or denies EZ Gig III access to the Windows shadow copy mechanism If this option is deselected EZ Gig IIl is not able to create copies or file images of the system volume or of volumes which are used by other programs at the same time Avoid exclusive read access Usually EZ Gig IIl when running on Windo
24. ollowing error codes will be indicated here Error 5002 and Disk error This error will be displayed if the boot medium is not readable when booting the program The error is reported by the BIOS of the computer and points to a defective data carrier or a problem with the used boot drive In many cases in particular when booting from a floppy disk an incompatibility between drive and data carrier is the cause Principally this problem can be fixed Please try the following steps at best in the indicated order e Try again to boot the program perhaps with without cold start e Create once again a bootable disk page 10 e Floppy disk format the floppy disk no quick format before creating a new one e Floppy disk use another floppy disk e Use if possible another boot drive NOTE If you didn t receive EZ Gig III as an installation package but on a bootable disk and if a disk shows this problems also after multiple trials on different devices please contact Support Keyboard and mouse EZ Gig IIl supports keyboards and mice with PS 2 standard or USB connector This also includes many wireless mice given they are connected as a true USB device Input devices connected with Bluetooth are currently not supported In this case please connect a separate USB device If keyboard or mouse or both do not function with EZ Gig III this is uSually due to a wrong legacy emulation setting in BIOS setup On most computers you can f
25. partition manually 1 Choose the Manually radio button on the Advanced Options window 2 Once this radio button is selected click the Apply Changes button The Adjust Partitions window shown left will pop up Positions and sizes of the partitions to be copied to the Destination drive are displayed graphically in a bar The original size of the partition is displayed in dark green while the additionally assigned space is displayed in light green The size of partitions displayed in black cannot be altered Free space not yet assigned to any partition is displayed in white 3 To resize click the desired partition s extended space light green portion and drag with your mouse You can also use the and cursor keys to the same effect 4 Once you have resized the partitions to the desired size choose Apply Adjustment which will then close the window 5 Once the Adjust Partition window is closed close the Advanced Options window by clicking the Close Window button www apricorn com 19 Start Clone Now you re ready Press the Start Clone button to start the cloning process EZ Gig III will keep you up to date with the status of the clone throughout the entire process with a progress bar and percentage completed Depending on your system size a clone can take anywhere from several minutes to a couple of hours APRICORN EZ GIG Ill Source gt 1 INTEL SS0S
26. puter s User Manual for instructions on how to enter the System BIOS and change the boot order To start EZ Gig Ill directly from the CD ROM 1 Insert the Upgrade Suite CD into your CD ROM Drive 2 Turn on the Computer and go immediately into the system BIOS screen 3 Set the CD ROM as the First Boot device Save your changes and Exit the BIOS to reboot the computer Helpful tip Some newer computers display a Boot Options message during startup Pressing the boot options key allows the user to temporarily change the boot order of the system Use this option to boot from the CD ROM without changing the BIOS settings The actual keys to activate this option will depend upon the manufacturer some BIOS use the lt F12 gt key others use the lt ESC gt key and the boot option is only available for a few seconds at startup before the BIOS falls back into the normal boot order 4 Once the BIOS is set correctly the CD ROM should boot up the computer and start the EZ Gig III software 8 WWwW apricorn com Connecting Your Hard Drive Before starting the EZ Gig III software please ensure that your new hard drive is connected to your notebook s USB port via the SATA Wire EZ Gig III automatically verifies which Apricorn upgrade product is being used If used without one of Apricorn s upgrade products EZ Gig III will not work EZ Gig Ill Start Up Options Depending on how you received EZ Gig III you have
27. rder e CachedMemory e Read cache and write cache e FastCopy e DMA e SharedMemory If the problem does not occur any more after having deactivated a certain option the previously deactivated options can be reactivated as a test IDE ATA SATA Hard disk not recognized If EZ Gig III does not recognize a hard disk there can be several reasons Perhaps the controller which the disk is connected to has not been found See next section IDE controller not found A further possible reason can be a non standardly connected hard disk This is for example the case if 30 WWwW apricorn com a hard disk is configured as slave and if a CD DVD drive or no drive at all is connected at the same IDE channel as master Normally EZ Gig III can handle that too NOTE If an SATA hard disk is not recognized this can also be due to the used SATA controller IDE controller not found There are the following three reasons why EZ Gig III has not automatically recognized an IDE controller e The IDE controller channel is deactivated e g on an onboard IDE controller Activate the IDE controller channel via the BIOS setup e Standard IDE controllers ISA are not taken into account if PCI IDE controllers are available Connect the respective hard disk to a PCI IDE controller in this case or deactivate the PCI IDE controller or controllers e The used controller does not correspond to the PCI IDE standard Although most controllers support this st
28. ricorn com 21 Congratulations your Clone is Complete Once your clone is complete EZ Gig III will let you know with a pop up window To get a report of the cloning process click the Details button APRICORN EZ GIG Ill Copy Mode Drive to dr i vee Source 1 INTELSS Destination 2 Secure HI Options m Fast on a 2p i Copy Data Your Clone was Completed Current sector 61 638 865 Successful ly Read errors Write errors enfic ation errors A complete copy has been created The copy has been verified The target drive has been adjusted automatically Please remove the Destination drive before restarting your computer Copy process finished The final report will outline the number of sector copied read errors write errors and if verified will also report verification errors A complete copy has been created The copy has been verified Source Disk 1 SAMSUNG CF ATA 31 ME Destination Disk 4 FIREBALL12805 1 222 MB Once you have finished Partition 1 FATTE primary 30 ME your clone click Quit EZ Gig You will then be prompted to turn your computer off and disconnect the attached hard drive Sectors copied 63 4156 Fead errors U Write errors 0 Verification errors U Elapsed Another copy QuitE2Gig 22 www apricorn com SuperDuper Backup Software for Mac 1 2 Insert Apricorn CD into your CD ROM drive
29. some E copy free areas partition data automatically You can also choose manual adjustment or opt for no changes SmartCopy on logical 1 1 copy accelerated cloning Reset Default Apply Changes Close Window A Verify Copy Compares the data of source and target after copying If verify copy is chosen the free areas between partitions will also be copied This option has no influence on the copying performance itself but offers the possibility to synchronize the data of the source and target after the copying process However the whole process of copying and verifying then normally takes approximately the double amount of time Choose this option according to your needs of copying and your time available Automatic ally M Manually Wi Mo Changes Copy Free Areas This option is off when doing a default clone but when selected allows you to copy free space between partitions from your internal drive to your external drive SmartCopy SmartCopy enables you to clone your file systems in a fraction of time usually required this option is chosen by default Media Direct Dell Used to deactivate MediaDirect software on the Destination drive Check your Dell notebook specs to see if you have Media Direct on your system www apricorn com 15 More Advanced Options To access additional advanced options click on the Apricorn logo in the bottom right corner of the Advanced Options window Advanced Options General setti
30. t com kbid 313348 For Windows Vista amp 7 cut amp paste or type the URL below into your Internet browser or click the link below http windows microsoft com en US windows7 Create and format a hard disk partition What is USB 2 0 USB 2 0 represents the next generation of PC peripherals and connectivity USB 2 0 is the first major evolution of the Universal Serial Bus standard which was originally designed to bring low cost connections and plug and play consumer devices to the PC world USB 2 0 adds new functionality to your laptop by allowing faster connections and greater flexibility without the need for upgrading your existing USB devices 26 WWwW apricorn com Why USB 2 0 Modern PC peripherals can run faster and do more than the original USB designers ever dreamed The USB standard was upgraded to keep pace with the rapid advances in technology and the explosion of new consumer devices USB 2 0 host controllers add the faster speeds and greater flexibility than these new devices require USB 2 0 will allow your computer to connect to the newest USB devices High Speed Video and Ethernet ultra fast scanners and disk drives etc How much faster is USB 2 0 USB 1 1 devices can communicate at about 12 Megabits sec USB 2 0 devices can communicate at speeds of up to 480 Megabits sec The SATA Wire is connected but the drive is not automatically detected by the operating system The mass storage device drivers are
31. tional factors not available for this test From this estimate a rough estimate of the clone time may be gauged Close www apricorn com 13 Drive Verification You are almost ready to start your clone but before you do EZ Gig III asks that you verify that the choosen drives are correct If they are click Next to continue go to page 20 to continue If you need to change your drive selection click the Back button At this point you can also modify the default options for your clone using the Advance Options button Only select this option if you would like to change your options from the default go to page 15 for more info on Advanced Options APRICORN M EZ GIGI Source gt 1 INTELS SDs 242hMHO806 160 76 320 MB Destination 2 Secure HDD 152 628 Options Fast on Safe on Verity ring on Smart on You are almost ready to Clone Please verify that the Source and Destination drives in the information box above are correct The default cloning option will create a standard hard drive clone and will automatically confirm the clone is complete once finished To change your cloning options from the default settings click the Advanced Options button below or click Next to continue Advanced Options 14 www apricorn com Advanced Options Advanced Options General settings Partitions ft Vie afe eo a an ane oes fd Verify copy For optimal compatibility EZ Gig can adjust
32. ver if you make sure before copying e g by defragmentation that all valid or necessary data is in the front part of the source medium and that this area is not larger than the target medium a copy onto a smaller target medium can also be successfully used Automatic troubleshooting In case of occurring errors EZ Gig III tries to troubleshoot them the best possible If this is not possible the errors will be mentioned in a corresponding error statistic in the detailed report after the clone is complete Intensive reading writing In case of read or write errors EZ Gig Ill uses different strategies in order to still be able to read or write this data if possible The time used for defective areas depends to a large extent on the respective medium According to the medium and its state several seconds up to minutes can be needed for the recovery trials Therefore it is recommended to always activate the option SafeRescue because then handling defective sectors takes place after the copying of all intact areas has been finished The process can then be aborted if it takes too long without losing the data of the intact areas Read errors During the copying process read errors can only occur on the source medium EZ Gig Ill then tries to read the defective areas immediately after the termination of the copying process with the option SafeRescue with the help of special data recovery strategies within a single troubleshooting run Durin
33. ws at first tries to reserve the source drive for exclusive access This is the most reliable way for creating an identical copy but it may interfere with other programs running at the same time If this option is selected EZ Gig Ill tries to create a HotCopy or a Livelmage at first www apricorn com 17 Partitions When used in the Default mode EZ Gig III will automatically resize your partitions according to the new hard drive space However EZ Gig IIl also gives the option of keeping your partition sizes the same or allows you to resize your partition sizes manually Advanced Options X General settings Partitions Verity copy For optimal compatibility EZ Gig can adjust some E copy free areas partition data automatically You can also choose manual adjustment or opt for no changes SmartCopy on p agil ee ny Automatic ally M Manually Mi Mo Changes accelerated cloning Reset Default Apply Changes Close Window A APRICORN Adjust Partitions You have chosen to adjust your partitions manually Adjust the existing partition size on the target drive using the bar graph below Change partition sizes by clicking and dragging or with cursor keys and _ 6 ti lt C CCOCC CT Partition 1 Legend Type used original file systern Size 140416 HE file system extension File system NTFS immutable partition Marnie Preload free space 18 www apricorn com Resizing your partitions manually To resize your
Download Pdf Manuals
Related Search