BEETLE /iSCAN Tower Line 100
Contents
1. Connecting the Keyboard Unlock the front door and swing it up 24 Only guide the cable as shown in the picture Important Notes Site Preparation and Commissioning ANI NNNM NNNM NN 25 Important Notes Site Preparation and Commissioning Connecting the System Rubber Connector 240V The delivered system is ready configured There are just a few things to do before starting up the BEETLE iSCAN Tower Line 100 Start up Insert the key into the lock turn it to the right and open the bottom door of the BEETLE SCAN Tower Line 100 26 Important Notes Site Preparation and Commissioning Now enter the code number of the safe in the data field 1 turn the knob 2 to the right and open the door Remove the cover of the recess for the mains cable It is fixed with five screws 0611 001 13 T TTT Syeter 0611 001 13 Auttrag 6061333 Tia hs Pim S By star 101s 21 Important Notes Site Preparation and Commissioning Guide the cable from outside through the recess 0611 001 13 Auftrag 6081539 LL LUWemm TNA System istna 0611 001 13 aet Aviron nosiapo LL UTE LIS mamen PTI A a wm e 325 PrN amp Plug the rubber connector into the power box beside the cash media dispenser 1 and push the power button in the position 1 2 FT AA Y A v 1 2 i ro 4 i s v 4 gt v y n oO A l C Tw l A 0611 002. is available for quick sup port The BEETLE SCAN Tower Line 100 is connected to an attendant station This is a POS system con trolling all connected BEETLE iSCAN POS Tower 100 terminals BEETLE SCAN Tower Line 100 offers the following main functions Record function records items the customer wants to buy Control function secures the recording of all items Payment function payment may be effected by banking cards customer cards and accounts coupons bank notes or coins Cash return uses bank notes and coins About this manual This manual refers to technically trained personnel only It provides all necessary site preparation information for installing BEETLE iSCAN Tower Line 100 at your site i Notes are marked by this symbol Caution Identifies action requiring caution The responsibility for all technical and special prerequisites for installation of BEETLE iSCAN Tower Line 100 is borne by the customer A detailed list of customer responsibilities is given in this manual Installation as well as connection of BEETLE iSCAN Tower Line 100 may only be executed by techni cally trained personnel The safety instructions given in this document should be strictly followed when handling BEETLE iSCAN Tower Line 100 Further safety installation and maintenance instructions can be found in the manuals supplied with the components In case of doubts or questions please contact Wincor Nixdorf Internation
3. signal LED is on is repeated keep pressed the 7 until the double signal is once more repeated Press the user ID No 1 9 and watch the signal 1 acoustic signal enabled 2 acoustic signals disabled 3 acoustic signals removed Long acoustic signal disabled it can not be enabled Finish press 0 At the operation with two codes 4 eyes principle the valid user code must be entered before the manager code to be able to do the programming Six unit code manager 123456 54 F Reading the audit trail PC setup Start program Reading the audit trail function 7 Important Notes Site Preparation and Commissioning In the lock memory records of the last 50 openings are stored with the user ID which can be read on a PC or laptop In a PC with Windows 95 or later the program LG View 3x Setu pExe is loaded and the COM port is set with the parameters 1200 bauds non parity 8 data bits 1 stop bit When the laptop has no COM port then this connection must be made with the PCMCIA card RS 232 or a corresponding USB adapter Start the program LG View 3x and set the corresponding port in the item KONFIGURA TION configuration Connect the interface data reading cable PN 42160 to the corresponding port Start the program L G View 3x and click with the mouse on the safe symbol start acquisition Insert the interface connector from the side into the keypad 3750K For the keypa
4. the back side of the device The work has to be done only by authorized personal Shutdown Shutdown the system by software application if running by pressing the power switch on the back or the side and the power off button at the UPS 34 Important Notes Site Preparation and Commissioning LAN Connection The LAN socket is located beside the Media Cash Dispenser in the safe left side Insert the key into the lock turn it to the right and open the bottom door of the BEETLE SCAN Tower Line 100 35 Important Notes Site Preparation and Commissioning Now enter the code number of the safe in the data field 1 turn the knob 2 to the right and open the door Remove the cover of the recess for the mains cable lt is fixed with five screws 0611 001 13 UT TTT TT 5 terr 36 Important Notes Site Preparation and Commissioning Guide the LAN cable through the recess 1 and plug it at the LAN socket 2 06 nag 004 igs iggy 4 Mount the device in reverse order 3 Important Notes Site Preparation and Commissioning Three Bags Module Keys for the three Bags Module Find the keys for the doors of the three bags module fixed in an envelope at the module see photo 38 Important Notes Site Preparation and Commissioning Installing the Three Bags Module The module has to be fixed on the floor of the shop Find the distance between the two screws se
5. the program LG 39E SETUP requiring 4MB must be loaded Insert the interface cable into the corre sponding COM port of your PC When the laptop has no COM port this connection must be made with the PCMCIA card RS 232 or a corresponding USB adapter Configure the port 1200 bauds non parity 8 data bits 1 stop bit and start the program LG39E SETUP The programming is made in clear text english and is very simple When operating with a parallel code each code is open ing the code length must be of seven units When operating with two codes The code length is six units Activate user The preset codes can be overwritten The active users to whom no code was assigned can be enabled later Not activated users cannot be enabled later Insert the interface connector into the keypad or into the adapter of the lock which is ready for operation and click the mouse on the item TRANSMIT Send and then press the key 0 on the lock keypad With this program it is possible to make the programming of several locks It is possible to save it for later consumer pro gramming File Save as After SETUP programming the lock is still in Factory mode and can be opened with the key 1 The programming will be effective when the factory mode is finished keep pressed 0 until the double signal is repeated and enter the manager code The program must be frozen by the change of manager code The lock is ready for operati
6. which can be recognized by alternate acoustic and LED signal each second During the time period for opening the valid code must be entered to reach the opening At the operation with two codes must two valid codes be entered during the time period for opening to succeed When no valid code is entered during time period for opening the lock is time secured again When the delay should be interrupted press the key 0 The user ID 9 WTU can open immediately At the operation with two codes the ID 9 is entered as the second code When the capacity of the battery is too low a series of acoustic signals is heard at opening According to the capacity of the bat tery it may be also only 3 4 or 5 acoustic signals Change the battery Use 9V ALKALINE batteries only The codes are stored in the lock even without power supply The battery compartment is installed down in the keypad When connected to the alarm equipment through the interlock device SP then the power supply is secured from this place Change the code immediately and carefully store on a secure place do not use your personal data telephone number date of birth etc as a code 91 Important Notes Site Preparation and Commissioning LED and acoustic signals 1 x short signal enter confirmation 2 x short signal valid code entered 3 x short signal wrong code not accepted 6 x short signal remote interlock the alarm equipment was not released LED sig
7. 0 sec remains valid the old code remains valid When the new code is not accepted triple signal it is too similar to the code already stored Enter a new code Enter the manager code and keep pressed the last number until the double signal LED is on is repeated press the 1 double signal enter the user ID No 1 9 e g 2 double signal enter the user code double signal enter the user code once more for confir mation double signal When a triple signal is followed then the code confirmation was wrong or the code is too similar to the already stored code Enter a new code 53 Important Notes Site Preparation and Commissioning C Disable user function 2 D Remove user function 3 E User status inquiry function 7 Enter the manager code and keep pressed the last number until the double signal LED is on is repeated press the 2 double signal and enter the user ID Nr e g 2 single signal The user ID Nr 2 is now disabled for such time period until again enabled with the function 1 and the ID Nr 2 Enter the manager code and keep pressed the last number until the double signal LED is on is repeated press the 3 double signal and enter the ID Nr e g 2 single signal The user ID No 2 is removed The Manager can anytime make the inquiry which user is enabled disabled or removed Enter the manager code and keep pressed the last number until the double
8. 05 Enter the manager code and keep pressed the last number until the double signal LED is on is repeated Press 9 and enter the time block 1005 double acoustic signal and confirm with a re peated entering of 1005 double acoustic signal The changing of the time values can be made only in the time period for opening If the time delay override is set then the user ID Nr 9 can open im mediately e g WTU When operating with two codes then the code of the ID No 9 is entered as second one This override code of the ID No 9 can be enabled only in the time period for opening or before the time delay is set The program selection of the lock two codes alarm delay override is made by programming on PC 39E Setup or manually on the key pad At the operation with two codes 4 eyes principle the valid user code must be entered before the manager code to be able to make the programming Six unit code manager 123456 56 Programming on PC FACTORY Mode Pre Setup mode Programming on PC PC setup Code length Program transfer Exit the Factory Mode Important Notes Site Preparation and Commissioning The lock may be installed in the factory mode It is opened when pressing the key 1 and it sends at the same time the alarm Thus the simple and flexible storing is reached and the simple operation during manufacturing is secured On PC laptop the operating system Windows must be in stalled and
9. 1 13 4 u LI B is b A ERA EDE TU OLA DE FAL 35 09651 0192143 0611 001 13 ay 5061433 QI we 10 i My Cte 784 n Start the system with the main power switch see next page 28 Important Notes Site Preparation and Commissioning Main Power Switch On the left side or at the back of the BEETLE iSCAN Tower Line 100 you find the main power switch Open the lock and remove it Lock for the safe See the main power switch now 29 Important Notes Site Preparation and Commissioning Connecting the System Twist Lock 120V and USV The delivered system is ready configured There are just a few things to do before starting up the BEETLE ISCAN Tower Line 100 Start up The power supply system must be equipped with separately guided protective earth conductor PE This kind of electricity system is known as TN S network Do not use PEN conductors N An overload and short circuit protection is not part of the BEETLE iSCAN Tower Line 100 A 16A fuse complying with IEC60127 breaking capacity of 1500A must be part of the building installation High leakage current Earth connection essential before connecting supply In the housing you find a Twist Lock plug for the connection to the house installation Do never use rubber connector for the house installation House Installation PENA L5 15P 154 125 LL CS 0 5 FF 30 Important Notes Site Preparation and Commissioning Insert th
10. WINCOR NIXDORF BEETLE ISCAN Tower Line 100 Important Notes Site Preparation and Commissioning May 2009 We would like to know your opinion on this publication Please send us a copy of this page if you have any constructive criticism on the contents the layout the product We would like to thank you in advance for your comments With kind regards Wincor Nixdorf International GmbH RD PD1 Rohrdamm 7 Haus 16 D 13629 Berlin Fax 49 30 5017 1075 Your opinion All product names mentioned in this document are registered trademarks Copyright O Wincor Nixdorf International GmbH 2009 All rights including the rights to the translation reprinting transmission or copying by any means in whole or in part are reserved Offenders will be liable for damages All rights including rights resulting from a patent grant or registration of a utility or design are reserved Contents HLFOGUIGUION H 1 PAD OUL IMIS MANUA nato one 1 A A O A A 2 ii SA O A EN 3 NOLS OM Laserna 9 TOOS VOL Nela ai 6 customer Requirements lote a Eu T COMPONEN Si E A A E a da do a 8 COMPONEN ASIA St e o o o 9 Rotating the top module of POS Tower optional ccoocccoccccoccccccnccncnconcnnonnnnnnnnoncnonnnnnnnnnnnnnnnnnnos 12 MET lA eet PA en ce ie ge eee er eget eT eee er 13 Unpacking and checking the System cccccccccseccceeeceececeneeceeeceeecaucecaueessueecseeseeecsueeseu
11. al WN Important Notes Site Preparation and Commissioning Warranty Wincor Nixdorf guarantees generally a warranty engagement for 12 months beginning with the date of delivery This warranty engagement covers all damages which occur despite a normal use of the product Damages because of improper or insufficient maintenance improper use of the product or unauthorized modifications of the product inadequate location or surroundings Will not be cover ed by the warranty For further information on the stipulation consult your contract All parts of the product which are subject to wear and tear are not included in the warranty engage ment For detailed warranty arrangements please consult your contract documents Important Notes Site Preparation and Commissioning Important Notes Appliances supplied by Wincor Nixdorf International GmbH comply with the respective safety regula tions for data processing installations and information technology installations including electrical office equipment for use within an office environment owitch off the device at the main power switch If UPS is installed you must switch off this too to separate BEETLE SCAN Tower Line 100 from power completely Appliances may only be repaired by authorized technicians Unauthorized opening of the housing or inexpert repairs can result not only in considerable personal danger but will also invalidate your warranty and liability pr
12. all ON m EU LIMIT 46 Cleaning MMS UCIGHONS Mete ptt M Hr RPM 46 Mainteriance and Service x uota titi lial hs ee DD TD D Lu asses 46 Maintenance for the rotating top MONuU e oocccoccncoccncocnccccnccncncnnnncnnnononnnonnnonncnnnnnonnnnnonanonaninnnos 46 Approved Cleaning Matera Sestao ome aeo pe pes east udo ric dilo 47 Changing tne Sate Code LOSIE o da 48 A Oe a eT a te ee enc eae 49 Programming WAN AG sito oia 53 Programming OME O anim enun cM Tm c MAC t oa of Manta PROC ARMIN c S Ter X MM TR 59 BEETLE iSCAN Tower Line 100 Dimensions occcocnccncnccccnononccnnncononononnonannonnnnonnnonnnnnnannonancnnaninos 61 BOC Gy BI Fee ine teeter D TT DEDI DL ERR 63 Environmental Requirements ocooccocccoconoconononononononononononononononcnoncnonnronnrnnnrnnnrnnnennnennnennnennnennninanenanes 64 Cert cauons ore maniaco dais 65 Note on Radio Interference SUPPIeSSION c cccccsscccscecececeeeccueeccueeceuceceueeseeseueecsueessueesseesseeeenas 65 PCG Class A Declaratio TI las cha 65 Recycling the BEETLE iSCAN Tower Line 100 oocccoccccccnccccncnccnconcnoncnonncnconcnonnnnonnnonnnnonnnncnaconnnnnnns 66 Important Notes Site Preparation and Commissioning Introduction The BEETLE iSCAN Tower Line 100 is a terminal where the user handles the purchase by scanning bagging and paying the items on his own In case of problems an attendant
13. astic coated hous Ing 100ml plastic cleaner in a pump bottle 50 dust cloths 10 keyboard swabs for places difficult to reach Damp cleaning cloths 01750097332 For cleaning and maintaining delicate EDP devices keyboards and housing Dispenser box with 100 cloths Dry cleaning cloths 01750097334 For cleaning display panes Antistatic and fluff free Pack with 300 cloths Compressed air spray 01750097331 Cleaned compressed air FCKW free for removing loose dust and dirt PRESSAIR particles 400ml bottle without a valve 70cm hose Cloth with ISOPROPYL 1000 01750104065 Pure isopropyl alcohol for cleaning dis pieces play Cleaning card 01750016388 Form cleaning magnetic heads and chip contacts in ID card readers Please note the manufacturer s specifications on the packaging and on the information sheet included in the packaging The product may be damaged or soiled if materials are used that are not approved or if they are used improperly 47 Important Notes Site Preparation and Commissioning Changing the Safe Code LG 39E Switch off the device Insert the key into the lock turn it to the right and open the bottom door of the BEETLE SCAN Tower Line 100 48 Important Notes Site Preparation and Commissioning Now enter the code number of the safe in the data field 1 turn the knob 2 to the right and open the door Lock 39E Contact of the audit trail Generally Each pres
14. d 3750 on the lock an adapter cable is used Enter the manager code and keep pressed the last number until the double signal LED is on is repeated and shortly press the 7 The data are transferred from the lock to the PC and shown in a list which can be printed The audit trail can be stored in the PC memory with SAFE and en tering the file name with a LOG extension The program calling is made with Load program loading The item Infos offers you a message about the lock status The user status is shown in a ten unit group of characters with manager first and second to tenth place the user numbers 1 9 Meaning 7 initialized code is active E enrolled code changed manager only D disabled code disabled removed the code can be entered again B blocked code cannot be enabled 55 Important Notes Site Preparation and Commissioning G Time delay for opening function 9 Time delay override Lock programming Manager can set the time delay for opening with the function 9 The values of the time delay 1 99 minutes and of the time period for opening 1 19 minutes are entered in a four unit block where the first two places are minutes of the delay and the further two places are minutes of the time period of opening min 1 minute If the setting should be made with 10 minutes of time delay and 5 minutes of time period for opening then the four unit block is as fol lows 10
15. e arrow and all other important measures in the figure below 0 DEOL 39 Important Notes Site Preparation and Commissioning Cross section for the drilling of the three bag module in the floor Place the three bag module at the BEETLE SCAN Tower Line 100 The picture see arrows shows the drillings to fix the three bag module Fix the module with the delivered two screws at the housing of the BEETLE ISCAN Tower Line 100 40 Important Notes Site Preparation and Commissioning Put the scale with the holes 1 on the pins 2 of the module The rotating feet 3 are for adjusting the security scale Adjusting the Security Scale Module To guarantee a faultless working of the security scale the security scale module has to be adjusted by a circular level Use the rotating feet 3 see photo above to adjust the security scale 41 Important Notes Site Preparation and Commissioning Cabling of the three bags module Remove the transport cover from the cables at the BEETLE iSCAN Tower Line 100 Then guide the cables amount differs underneath the module through the hole inside Fix the cable cover at the BBETLE ISCAN Tower Line 100 with the Allen screw 1 and then the cov ers 2 around the three bags module 42 Important Notes Site Preparation and Commissioning UPS Connect the switch to activate the battery as shown in the photo below Unlock and open the left door of the th
16. e key into the lock turn it to the right and open the bottom door of the BEETLE SCAN Tower Line 100 31 Important Notes Site Preparation and Commissioning Now enter the code number of the safe in the data field 1 turn the knob 2 to the right and open the door Plug the rubber connector into the power box beside the cash media dispenser 1 and push the power button in the position 1 2 0611 001 13 u a Szans MEAT A A pe a 0611 001 13 ETA 32 Important Notes Site Preparation and Commissioning Remove the cover of the recess for the mains cable It is fixed with five screws 0611 001 13 weg e06 929 Us Dee Bie S yator 0611 001 13 Auttrag 6061333 gnus 131247 N Switch off the power from the house installation Guide the cable from the safe through the recess mount the Twist Lock coupler to the power cable and plug it into the house installation socket 0611 001 13 e ece sys A A Symra dI E da Switch on the house installation and start the system with the main power switch see next page Do not forget to switch on the UPS if installed 33 Important Notes Site Preparation and Commissioning Main Power Switch On the left side or at the back behind the lock of the BEETLE SCAN Tower Line 100 you find the main power switch Lock for the safe Main Power Switch i It is possible to change the position of the main power switch to
17. ective device i It is absolutely necessary to check the function of the original equipment before you perform any changes e g by installing an expansion card Only then is it possible to accept a functional defect as a claim i We recommend saving the original packaging for transport at a later time protection from impact and shock 14 Important Notes Site Preparation and Commissioning Installing the Device in the Store The BEETLE ISCAN Tower Line 100 will be delivered on a pallet with industry standard 1000mm x 1200mm size Remove the wrapping paper first Aside the BEETLE SCAN Tower Line 100 you find the ramp to remove the device from the pallet The ramp has to be ordered separately No 0175 0128351 The size of the ramp is 600 x 1200 x 118 mm Aelius uniti Important Notes Site Preparation and Commissioning Put the pallet to the floor in front of the pallet with the device like shown in the picture Roll the BEETLE SCAN Tower Line 100 down and place it in the store i The back panel is removable Leave 1m free area for service purposes Important Notes Site Preparation and Commissioning Removing the Transportation Locks After unwrapping the system remove the transportation locks from the following components see arrows Scanner Scale y L 1 TULIT M NZEN kassenson OO T Pole Light 17 Important Notes Site Preparation and Commi
18. eesseesaueessaeess 14 Inistaling the Device in the rise a eroe eee raii 15 REMOVING tne Transportation LOCKS even A a dou a xad o eiu qa dete uud dado eade xu adio 17 Scanner Scale re 17 AAA n A II A A 17 Cash Media DISPense cant bl Ea 18 Display ano INOLGDOX dee c c 20 A A O yn un ase ibe S eecectncn wecopualeueencas 22 Accessories mthe Safe tla sae ea as e tao 23 REMOVING The FOIS ra a ii 23 Connecting MNR ME pL 24 Connecting the System Rubber Connector 240 V o oocccoccnccccccccnccncnccncnnonnnonononncnonnnnonanonnnnnonnnonaninnnnnnos 26 Sarenet cd LM M MC M LM M EL UM LU EE 26 Main POWER e ooo too mre 29 Connecting the System Twist Lock 120V and US W oocccoccccccnccccnccccncconococononcnonannnnnnonnnnnonononncnnonnnnns 30 SAN UD tT PS 30 Mal OWOT SWINGIN erc C RS 34 vq Uife o o ew 34 AN CONNECTOR c5 coc cals tate aha ae dad e M UM LED mE 35 Three BAGS eov 38 Keys for the three Bags Module eno 38 Installing ine Three Bags MOoGQUle iuc oia a a a a cata RE S a ee 39 Adjusting the Securty Scale Module coi 41 Cabling of the three bags module coooccooccccocnoconncconncnoncconnocnnonannonnnnnnnnonnnnonannonnnnonnnonaninnannonans 42 UPS acesa eee we eee cee ee eee 43 os AA eee eee 44 DISENO AOS a A a a di dedo 45 ADDEN te a soo i LSU DI uu LI LM i LM LU 46 FUNDS DOCUMIGMT
19. equirements may only be operated with specific permission of the relevant authorities FCC Class A Declaration This equipment has been tested and found to comply with the limits for a Class A digital device pur suant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful inter ference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Modifications not authorized by the manufacturer may void users authority to operate this device This class A digital apparatus complies with Canadian ICES 003 Cet appareil numerique de la classe A est conforme la norme NMB 003 du Canada 65 Important Notes Site Preparation and Commissioning Recycling the BEETLE iSCAN Tower Line 100 The BEETLE iSCAN Tower Line 100 was de signed according to the Wincor Nixdorf standard Environmentally Conscious Product Design and Development The BEETLE ISCAN Tower Line 100 is manufac tured without the use of CFCs and CCHs and is manufactured to a great extent out of materials and components which are recyclable For recycli
20. ided Storage conditions EN 60721 3 1 Class 1k2 Climate test according to IEC 68 EN60068 Ambient temperature 5 C 40 C Humidity 5 r h 1 g m 85 r h 25 g m 0 5 K min Temperature change 0 5 K min max 7 5K 30 min Transport conditions EN 60721 3 2 Class 2k2 Climate test according to IEC 68 EN60068 Ambient temperature 25 C 60 C Humidity 15 r h 1 g m 98 r h 32 g m Temperature change 25 C 25 C 64 Important Notes Site Preparation and Commissioning Certifications of the manufacturer This device complies with the requirements of EEC directive 89 336 EEC with regard to Electromagnetic Compatibility and 73 23 EEC Low Voltage Directive Therefore you will find the CE mark on the device or on its packaging Devices without integrated UPS according class B Devices without UPS according class A Important Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Note on Radio Interference Suppression All secondary appliances that are connected to an appliance must be equipped with radio interference suppression in accordance with EC directive 89 336 EEC Products that fulfill this requirement are accompanied by an appropriate manufacturers certificate bear the CE symbol or the radio protection symbol Products that do not fulfill these r
21. ing If dropped on a body part the coin dis penser could cause serious personal injury A Caution The coin dispenser weighs approximately 65 pounds filled with coin Do not move filled Mounting supports should be properly designed to handle the load A Caution The coin dispenser should be secured to a sturdy flat surface before utilizing its hinged chassis to dump and empty a hopper of coin Cleaning Instructions Always turn off the system before cleaning specials If liquids were spilled over your System switch off the system and disconnect the power plug Dry the device with a cloth and leave it switched off for a while LCD Displays If the display element is damaged and the liquid crystal solution leaks out onto your hands or clothing please wash your hands or clothing immediately under running water for at least 15 minutes using soap or alcohol If the liquid comes into contact with your eyes consult a medi cal doctor immediately Inside the display the high voltage needed for backlighting the LCD display is generated by the inverter High Voltage Before opening the device make sure that the device is disconnected from the main power supply Opening of the device only by authorized personnel Note on Laser The PSC 82xx and 8300 Scanner Scale is not intended for long term viewing of direct laser light How ever the unit is safe if used as intended This scanner meets the following laser LED power
22. move the codes Function 3 and user number 60 Important Notes Site Preparation and Commissioning BEETLE iSCAN Tower Line 100 Dimensions Y 61 Important Notes Site Preparation and Commissioning eomm cum Ms m m rt A mm T y AREA LE ERY It RI eee e 505 62 Important Notes Site Preparation and Commissioning 8nd q51 51 le aepooaocoocdado apago adao noaaaaoanaadadg 00000500008 dus aer ADT IJDEZ vun Aing xod PANS Apt CRUSH z5 0Jj00 U107 mddoy aie ara pamo Japidg tise TUR ri czsu n PO raj AA eds Teuondo HOdJ3058V D68L 95vEZ 1 TI uodnog IAW gaydnoo NWI ev re puondo aril monon rw psg xoxi JUE IS PI puey Teuondo Az AL 2mm 4z f 98 vez E X pads petis puordo jor apod ani u23135 tno T Block Diagram 63 Important Notes Site Preparation and Commissioning Environmental Requirements Operating temperature EN 60721 3 3 Class 3k3 Climate test according to IEC 68 EN60068 Ambient temperature 5 C 35 C Humidity 596 r h 1 g m 8596 r h 25 g m Temperature change 0 5 K min max 7 5K 30 min Barometric pressure 70 kPa 106 kPa 70kPa corresponds to an installation at approximately 3000 meters above sea level Installa tion environments with long periods of sunshine should be avo
23. nal each 10 sec 1 flashing Interlocking time after a wrong entry LED signal each 2 sec Time delay for opening is running Alternate LED and acoustic signals Time period for opening is running A series of acoustic signals ca 3 sec Low battery capacity Still available ca 10 openings Dependent of the battery capacity there may be also less acoustic signals Therefore the battery change should be made also in case of double or triple signals without ready time for opening Use ALKALINE batteries only 92 Programming Manager Manager function Overview Manager code A Manager code change at the opened door function 0 B Enable user function 1 Important Notes Site Preparation and Commissioning Manager code change ID Nr 0 function 0 Enable user ID Nr 1 9 function 1 Disable user function 2 Remove user function 3 User status inquiry function 7 keep pressed Reading the audit trail function 7 Setting the time delay for opening function 9 It is possible to open the lock with the factory code 123456 7 Change the code immediately Enter the manager code or the old code and keep pressed the last number until the double signal LED is on is repeated press the 0 and enter the new code double signal enter the new code once more for confirmation double signal The new code is now active In case of wrong entries or pauses during entering the code longer than 1
24. nalty the LED is flashing each 10 sec The key pressing is refused with a triple signal The user can change its code by himself anytime a Enter the code and keep pressed the last number until the double signal LED is on is repeated press the 0 and enter the new code double signal enter the new code once more for its confirmation double signal b Press 0 for seven times when operating with two codes six times O enter the old code and then two times the new code always followed by double signal The new code is now active In case of wrong entries or pauses during entering the code longer than 10 sec remains valid the old code When the new code would not be accepted triple signal then it is too similar to the code already stored Always enter the new code with the door opened Silent alarm must be programmed Time delay for opening must be programmed Time delay override must be programmed Power supply Safety notice Important Notes Site Preparation and Commissioning In case of blackmailing the silent alarm can be started so that you enter the last code number 1 e g the last number is 9 and the alarm is started with the number 0 instead of 9 The lock function is the same as entering the code for opening After valid code entering the time delay starts to run which can be recognized by the LED signal each 2 sec After delay period ex pired the time period for opening starts
25. ng purposes do not attach any additional adhesive labels to the device Wincor Nixdorf disposes of old devices in an envi ronmentally responsible manner at a recycling cen ter that is ISO 9001 and ISO 14001 certified as is the entire company Follow your local regulations on the disposal of toxic waste such as the system ribbons Your Wincor Nixdorf vendor will answer any questions you have concerning returns recycling and disposal of our products 66 Wincor Nixdorf International GmbH D 33094 Paderborn 01750111493C
26. ommissioning gt rm DN E 10 Important Notes Site Preparation and Commissioning Behind the bottom door you find the Media Cash Dispenser 1 the CMD Shutter 2 and the central power supply unit in the back of the safe 3 e Safe cover door Important Notes Site Preparation and Commissioning Rotating the top module of POS Tower optional You can rotate the top module of the BEETLE SCAN Tower Line 100 including scanner printer coin dispenser etc by 180 Therefore insert the key into the lock see arrow and unlock it I m Important Notes Site Preparation and Commissioning Durn the bag holders 1 down N Now rotate the top module by 180 using both hands Maintenance Clean the rotating surface for the top module after 500 rotations or at least once a year Clean it with commercially available soft cleaner N Dry rotating surface after cleaning 13 Important Notes Site Preparation and Commissioning Unpacking and checking the System Unpack the system and verify that the scope of delivery is identical to the information on the delivery ticket Should you notice any e transport damages or discrepancies between package contents and delivery ticket or e functional defects please inform your contracting parties or the branch office of Wincor Nixdorf immediately Please indi cate the number of your delivery ticket and delivery ticket position and serial number of the resp
27. on 57 Important Notes Site Preparation and Commissioning Reset to the Factory Mode Safety notice 98 When the programs shall be changed the reset with the Re set Box is necessary for a new programming Disconnect the lock from the power supply for ca 3 minutes remove the battery and insert the Reset Box into the BAT inlet of the lock The lock is in the Factory Mode opening with key 1 The Reset Box must be connected to a 9V ALKALINE bat tery Do not assign code to the users of no use for the time being Manager can do this later Manual programming Factory Mode Pre Setup mode Exit the Factory Mode Code length and program selection Programming function 8 Important Notes Site Preparation and Commissioning The lock may be installed in the factory mode lt is opened when pressing the key 1 and it sends an alarm Thus the simple and flexible storing is reached and the sim ple operation during installation is secured Keep pressed the key 0 until the double signal is repeated Now the manager code is 555555 The code length and program selection are made with the function 8 and a group of two characters The first place in this group of characters is the code length the second one is the program number Program 0 Manager mode operation with parallel code Program 1 Manager mode with delay override Program 2 Operation with two codes Program 3 Two code operati
28. on with delay override Program 4 Manager mode with alarm Program 5 Manager mode with alarm and with delay override Program 6 Two code operation with alarm Program 7 Two code operation alarm and delay override Enter the manager code 555555 and keep pressed the last number until the double signal LED is on is repeated and enter 8 Then enter the group of two characters made of code length and program number double sig nal and repeat the enter of the group for confirmation double signal In case of the seven unit codes the manager code is 7 x 5 99 Important Notes Site Preparation and Commissioning Enable user function 1 Program freeze Reset to the Factory Mode Enter the manager code and keep pressed the last number until the double signal LED is on is repeated then press 1 and the user ID No 1 9 and enter the code two times The disabled users cannot be enabled after the change of the manager code With the change of the manager code the program is frozen and it can be changed only with resetting and with a new programming Disconnect the lock from the power supply for ca 3 minutes remove the battery and insert the Reset Box into the BAT inlet of the lock The Reset Box must be connected to a 9V ALKALINE bat tery The lock is in the Factory mode again Pre Setup Mode Safety notice Do not assign codes to the users of no use for the time being Re
29. otection Always consult the enclosed documentation before doing any work with this appliance fthis device is brought from a cold environment into a heated place of business condensa tion may occur Before operation the device must be completely dry Therefore an acclimati zation period of at least two hours must be adhered to Always lay the supply leads and cables in such a way that they cannot be stepped on or tripped over Exchange damaged cables immediately In order to completely disconnect the device from the power source turn the device off and use the separator in the fuse box building installation Make sure that no objects such as paper clips can reach the interior of the device since electrical shocks or short circuits could result To avoid overheating of the power supply unit Ensure that the BEETLE SCAN Tower Line 100 receives adequate ventilation gt Ensure that the BEETLE SCAN Tower Line 100 receives adequate ventilation to avoid over heating During an electrical storm data cables should not be plugged in or unplugged Keep the device away from vibrations dust humidity and heat Ensure that used parts are disposed of in an environmentally friendly manner In case of an accident such as a damaged housing entry of liquids or foreign objects switch the device off and use the separator to completely remove the device from power The BEETLE SCAN Tower Line 100 i
30. ree bags module and place the UPS inside Then plug the power cable coming from the BEETLE SCAN Tower Line 100 to the UPS Now you can switch the device on 43 Important Notes Site Preparation and Commissioning Security Scale Guide the COM cable through the hole and connect it to the socket of the security scale NS s VT Us diras 5615 I Put the cover into place 44 Important Notes Site Preparation and Commissioning Basket Tray You need at least two persons to install the basket tray Please find the drillings to install the basket tray on the side of the BEETLE SCAN Tower Line 100 They are always on the opposite side of the security scale Install the basket tray with three screws delivered with the system Baseboards Find the baseboards and screws to mount at the BEETLE iSCAN Tower Line 100 in the by pack kit scope of delivery 45 Important Notes Site Preparation and Commissioning Appendix Further Documentation Please find the documentation Hardware User Manual on the Internet http www wincor nixdorf com internet site DE DE Support Downloads SelfServiceSystems Manuals manuals node ht ml The service documentation is just available on the Wincor Nixdorf Intranet Cleaning Instructions Always turn off the system before cleaning The glass surface of your Touch Screen should be cleaned with a mild abrasive free com mercially available glas
31. requirements Class lla Laser Avoid long term viewing of direct laser light Class 1 EN60 825 European Standard Important Notes Site Preparation and Commissioning Tools you need Keep the following tools at hand for working on the BEETLE SCAN Tower Line 100 Socket wrench Open end wrench Water level Torx screwdriver Flathead screwdrivers two sizes Phillips screwdrivers Flathead screw driver Torx screwdrivers hexagon round screwdrivers Antistatic kit 5 mm 6 mm 7 mm 8 mm and 10 mm e g 1 0x6 0 6 x 4 5 PHO 1 and 2 0 5x 35mm 8 10 and 20 Important Notes Site Preparation and Commissioning Customer Requirements Before BEETLE iSCAN Tower Line 100 installation can be started the customer is held responsible to provide the following Appropriate drawings concerning location of the equipment as well as site wiring power and communications paths and lengths Location of other equipment that may generate electrical noise electromagnetic interference or heat Provision and installation of all communication cables wall jacks special connectors and as sociated hardware Provision and installation of necessary power distribution boxes conduits grounds lightning protection devices and associated hardware Ensure that all applicable codes regulations and laws including but not limited to electrical building safety and health are adhered to Provision and installation of auxilia
32. ry power or other equipment as required Provision of storage or service as required Provision of a level floor to locate the BEETLE ISCAN Tower Line 100 Provision and installation of floor coverings and environmental systems that limit or control static electricity build up and discharge Provision of appropriate equipment for the remote support The customer is responsible for relocating the Self Checkout equipment check stand and compo nents to the final placement installation position Keep the Wincor Nixdorf equipment area free from dust smoke lint and other particles Restrict smoking eating and drinking around the equipment Avoid locating the equipment near other machines that generate ink carbon and paper dust particles Li Please note that Wincor Nixdorf will not take over any warranty liability if the technical and environmental requirements are not met Important Notes Site Preparation and Commissioning Components DC hmmm e umm o Dm 2 raw o canon CCT qu mm ronca o un fe Seaman eje The Pin Pad is customer specific different models and positions are possible Important Notes Site Preparation and Commissioning Components Inside On one side of the BEETLE SCAN Tower Line 100 you find the lock for the front door Put the key into the lock turn it to the right and swing the door upwards p Have a look on the components on the next page Important Notes Site Preparation and C
33. s cleaning product All pH neutral materials pH 6 to 8 are good for cleaning Cleaners with pH values 9 to 10 are not recommended Cleaning with water and isopropyl alcohol is possible as well Do not use solvents containing acetic acid Use a soft fine meshed cloth to clean the surface Dampen the cloth slightly and then clean the screen A wrong maintenance may cause damages to the screen which are not covered by guarantee or warranty Maintenance and Service When carrying out work on the components and modules that carry an electrical charge this equip ment must first be disconnected from the power supply Besides switching off the power switch on the power distributor the safety plug must be disconnected from the power distributor Device housing Clean the housing with a vacuum cleaner or cloth Eliminate damage to paint if necessary and possible Maintenance for the rotating top module Clean the rotating surface for the top module after 500 rotations or at least once a year Clean it with commercially available cleaner N Dry rotating surface after cleaning 46 Important Notes Site Preparation and Commissioning Approved Cleaning Materials The items listed below can be ordered from Wincor Nixdorf branch office or your Wincor Nixdorf sales partner Product Name Order Number Explanations Professionell cleaning set for 01750097335 For cleaning and maintaining keyboards EDP devices and varnished and pl
34. s the result of state of the art technology Therefore please also ensure that the BEETLE iSCAN Tower Line 100 is operated under modern build ing and technical conditions in order to ensure flawless and efficient operation The appliance and other information technology hardware should only be connected to electrical supply net works with a separate protective earth wire PE This type of electrical supply network is re ferred to as a TN S network Do not use PEN conductors Also follow the recommendations set forth in DIN VDE 0100 Part 540 Appendix C2 as well as EN50174 2 85 4 3 This will help prevent malfunctions When working on the cutter of the printer the device must be turned off Important Notes Site Preparation and Commissioning Always keep the ventilation slots free of obstruction to ensure adequate air circulation and avoid overheating Transport the appliance only in its original packaging to protect against knocks and bumps If a lithium battery is supplied with the appliance ensure that the battery is replaced with an equivalent type Otherwise there is danger of explosion Lithium batteries may only be re placed with identical types or other types recommended by the manufacturer Batteries must be disposed of according to local regulations on the disposal of special waste Connecting Peripherals Use only shielded cables when connecting devices to the system to ensure compliance with international Rules and Regula
35. sing of a key is confirmed by a signal an acoustic signal and a LED flash A correct code entering is followed by double signal the wrong code is followed by triple signal Pauses longer than 10 sec will cause deleting of all previous entering and you have to start again Code entering Enter the seven unit numeric code or a word with 7 characters a Operation with parallel code a double signal is followed manager mode Manager code 1234567 49 Important Notes Site Preparation and Commissioning b Operation with two codes must be programmed Opening Locking Wrong try penalty Change of code at the opened door 90 Six unit numeric codes or words with six characters For opening two valid codes must be entered The code sequencing is arbitrary two of all valid codes can open Manager code 123456 and 654321 After entering of a correct code double signal the lock is ready to open for a time of 3 sec Turn the keypad by 90 TO THE RIGHT clockwise until it stops Swingbolt entry is fixed turn handle boltwork When during the ready time for opening 3 sec no opening is made then the lock will be automatically secured Turn the keypad back so that it is horizontal Swingbolt entry Is fixed turn handle boltwork Check the lock to be locked After 4 successive wrong code enters the lock will be cut off for 5 minutes then it will be cut off already after 2 wrong tries During this wrong try pe
36. ssioning Cash Media Dispenser Insert the key into the lock turn it to the right and open the bottom door of the BEETLE SCAN Tower Line 100 18 Important Notes Site Preparation and Commissioning Now enter the code number of the safe in the data field 1 turn the knob 2 to the right and open the door Remove the transportation locks gt M Nl p rem TA tx E Lr EA EE i em p ae 3 op n Kaela Vy t T WERTE 19 Important Notes Site Preparation and Commissioning Display and Notebox On one the side of the BEETLE SCAN Tower Line 100 you find the lock for the front door see arrow below Put the key into the lock turn it to the right and swing the door upwards 20 Important Notes Site Preparation and Commissioning Remove the transportation locks from the display 40000000000 ICAO 12 000 4 9 0 0 0 21 Important Notes Site Preparation and Commissioning Security Scale 22 Important Notes Site Preparation and Commissioning Accessories in the Safe Do not throw away the wrapped accessories in the safe They are necessary to unmount the cash media dispenser Find further information in the service manual 0611 001 13 D enaaae Autivag aner MNN Ann IAS Removing the Foils Remove foils from hardware components carefully Let a second person give you a hand this reduces the danger of scratches 23 Important Notes Site Preparation and Commissioning
37. tions for radiated emission as well as to achieve a high immu nity against external disturbances Coin Module The coin dispenser is a safe product All the necessary precautions have been taken to en sure that normal operations and maintenance procedures are safe A Care should be taken to keep fingers clear of the hinged chassis panels when dumping coins or rotating the hoppers to gain access to the inside of the unit This area is a potential pinch hazard and may cause significant injury when using hoppers filled with coin Wincor Nixdorf International will not be held liable for damages and or personal injuries brought on by incorrect operation and maintenance practices Only a qualified service technician should replace an individual hopper assembly or remove the pcb protective shield to access internal components Ignoring this warning may void the products warranty Safety Icons Critrical Shock Hazards indicates potentially lethal voltages are present Stop Identifies important information requiring special attention Caution Identifies actions requiring caution Pinch Hazard identifies possible pinch hazards Important Notes Site Preparation and Commissioning Heavy Objects A Caution The coin dispenser weighs approximately 21 pounds unfilled with coin When trans porting the unit avoid bumping or dropping it which could damage the unit The coin dis penser should be empty of coin before transport
Download Pdf Manuals
Related Search