269AM020
Contents
1. ADANGER Failure to comply may result in potential death or severe injury to the user and third parties AWARNING Failure to comply may result in potential death or severe injury to the user and third parties ACAUTION Failure to comply may lead to light medium injury and damage to the product and surroundings PLEASE Failure to comply may affect product performance and may lead 4 Check First A PEX NI DAMPERS are engineered according to specific vehicle applications Please confirm that this product matches with the vehicle application you have chosen This product is composed of components listed in the contents table Please notify the dealer of purchase for any missing or damaged components Notify your dealer of purchase for any damaged or missing components BEFORE installation Installation of the shock absorbers should be performed at an experienced shop repair facility or adequately equipped facility A7PEX Integration Inc is NOT responsible for any injury or damages incurred from the improper installation and use of this product 5 Clrable3 Contents Table Product Code Product Name Amount Comments FRONT Right and Left are identical 2 269AM020 SHOCK ABSORBER Full Kit REAR Right and Left are identical SHOCK ABSORBERS SPRING FRONT 7inch 4481b in 180mm 8kegf mm SPRING REAR 7inch 336lb in 180mm 6kgf mm HEIGHT ADJUSTMENT WRENCH NUT M10 X P1 25 HEXAGON WRENCH2. Excessive ride height changes can put excessive strain on the axles of a vehicle Be sure to check for adequate grease and lubrication on the axles The 4 PEX NI DAMPER allows for a wide range of vehicle ride heights Excessive lowering may cause problems in tire and fender clearance as well as clearance with other suspension components Take all of these factors into account when lowering the vehicle Shock absorbers will wear according to usage Life expectancy will range according to driving style Please contact your dealer of purchase to obtain information on recharging the shocks 16 Contact A PEX Integration Inc APEX Integration Inc 1449 West Orange Grove Avenue Suite A Orange CA 92868 Tel 714 685 5700 Fax 714 685 5701 APEX CO Ltd 5 21 3 203 Fujimi Chuuo ku Sagamihara city KANAGAWA 252 0236 JAPAN Tel 81 42 768 8145 Fax 81 42 768 8072
3. INSTRUCTION MANUAL 6 Manual Information Print Date Product Number Version MAR 15 2005 4298 0100 ME Ver m heig ht serie e is on the ground Be sure to settle suspension after ewer ing Fender arch T H o amp Fender a K milimeters o seat to attain recommended vehi SS Quick Adjust top Turn R C om top Turn Left So Lock Nut Torque Specification ait O 1 5 JOver 3 5kaf gt mC over34 3N Por ommen A la u VECOPFEe led KI lt lt Target Height gt gt Trin Height Lowering AnountjAd justnent er Up 360 SRA E ee Habe stro aS ample clearance with JEN Fig He Adjust Case insertion MaS A to the lee Figure on the denotes factory settings Imported ing of this position may couse maximun Bie and damage the shock absorber Fig H ts tri Be sure to settle suspension after lowering Fender arch The recommended height is for refrence purposes Pf NN FU TAEUN QUT y Vehicle condition grade year and options affect actual ride height Please adjust lower an ea E nilineters spring seat to at
4. e shocks and check for any problems with the vehicle first In the unlikely event of a product failure discontinue use immediately write down the product code vehicle type serial number and place of purchase and contact your dealer of purchase The following symptoms are normal e Internal Shock Absorber Sound A whooshing sound coming from within the shock e Strut Type Clearance Relation Sound A slightly rattling sound coming from the cylinder case of the shock is normal 10 To The Installer A DANGER Never tighten the upper mount with an impact wrench Tighten the upper mounts according to the recommended torque specification listed below Failure to do so may result in damage to the upper mount bolt and may cause product failure Bolt size Recommended torque Comments M10x1 25 17 6 23 5N m 1 8 2 4kgf m Standard Type M12x1 25 27 4 34 3N m 2 8 3 5kgf m Standard Type M12x1 25 36 3 50 0N m 3 7 5 1kgf m Strut type Lower Spring Seat Torque Specifications Components Tightening Torque Comments Lower Spring Seat Lock Nut Over 34 3N m 3 5kgf m All Vehicles A WARNING Always replace all 4 shocks at once Be sure to use the included nylon nut Always tighten to recommended torque specifications Never use an impact wrench or gun to install this product Failure to do so may result in severe thread damage A CAUTION Af
5. hicle height can be adjusted by adjusting the lower spring seat position The lower spring seat will change 1 5mm per rotation Adjustment amount and actual vehicle height may NOT be the same 14 About the Springs A DANGER Use care when handling the springs Handling the springs using tools hitting the spring with a hammer grinding the spring with a file and cutting the spring will compromise the spring performance This could lead to spring damage A CAUTION Spring type will differ according to vehicle application We recommend the springs included in the CONTENTS TABLE Use of different springs must take vehicle type acceptable stroke and vehicle weight into account Please contact your local dealer for more assistance 15 About Vehicle Maintenance PLEASE Installation of this A 7PEX NI DAMPER may cause the vehicle alignment to change Improper alignment will cause abnormal tire wear Be sure to check alignment after installation using an alignment tester or corner weight scale The A PEX NI DAMPER allows for a wide range of vehicle ride heights However excessive vehicle lowering may cause dangerous handling characteristics and is not recommended Please adhere to the recommended vehicle ride heights as close as possible Also take vehicle chassis clearance into account when lowering The A PEX NI DAMPER allows for a wide range of vehicle ride heights
6. ht Please adjust the lower spring perch to obtain recommended trim height When removing the spring form the shock absorber lower the spring seat to relieve pre loaded tension or use a spring compressor Be sure not to scratch the threaded outer case when using a spring compressor Always test drive that the vehicle and check for any loose components or clearance problems 12 Caution After the Shocks Hawe Been Installed A DANGER Some shock absorbers differ in construction for the left and right sides Be sure to confirm proper sides by using the CONTENTS TABLE Improper installation may lead to serious damage and accidents 13 How to Adjust Ride Height A CAUTION Always use a lift jacks or jack stands when adjusting ride height Raising the vehicle without the proper equipment may cause the unstable vehicle to fall leading to serious injuries Be sure to adjust the left and right side height of the vehicle evenly When adjusting the ride height use an alignment tester or corner weight gauge Improper alignment can lead to serious accidents Be sure to tighten the lock nut A loose lock nut is extremely dangerous Please be sure to tighten the nut using the included wrench Lowering the vehicle too much will result in inadequate stroke for the shock This can lead to unstable handling and could cause accidents Adjust the vehicle height to a well balanced height Ve
7. l is intended for experienced installers with adequate knowledge of vehicle repair service and installation Installation should be performed at a qualified service center or dealers with proper equipment e Be sure to keep this manual stored in a safe place for future reference e In the case of transferring ownership always give this manual to the new owner Product Number 4298 0100 ME 2 Table of Contents Product Name Product Code Vehicle Application Preface Table of Contents Table2 Signal Words and Their Meaning Check First Table3 Contents Table Table4 Manual Information Assemble Diagram Front Assemble Diagram Rear About A PEX NI DAMPER Usage To The Installer Installation Process Cautions After the Shocks Have Been Installed How to Adjust Ride Height About the Springs About Vehicle Maintenance Contact OOO WAAIAADNAHPWWWN WN 3 Signal Words and Their Meaning We have included various cautions and recommendations to prevent any harm to you or other people These safety recommendations have been separated into categories with SIGNAL WORDS to denote the importance of each point Please be sure to read all of these cautionary points to ensure safe installation of this product Do not attempt installation of this product without a clear understanding of the risks involved Table2 Signal words and their meaning Signal word Signal Word Meaning
8. ration Inc is NOT responsible for and injury or damages incurred through the use of other manufacture s products Always use the included Bump Stops Failure to do so may result in the shortened life of the shocks poor performance abnormal spring setting and damage to the shocks Never excessively lower the vehicle This could lead to suspension failure damage to the fender damage to the wheels and product failure If the vehicle is lowered excessively stop the vehicle and raise the ride height as soon as possible at a qualified repair shop Be sure to test driver the vehicle after installation Be sure to double check installation and tighten any bolts and components Be sure to adjust ride height to conform to any local and federal laws A PEX is not responsible for any citation resulting from illegal adjustment of ride heights Consult your local law enforcement agency to confirm legal ride height and headlight bumper heights A CAUTION Rock and debris from snow and dirt driving can lead to oil leaks from the shocks Be sure to check for excess debris on shaft of the shock to prevent this from happening PLEASE Strut type shock absorbers have a minimum amount of clearance between the cylinder case and the outer case to prevent friction Some models may emit a slight noise or minor vibration This is normal In case of unusually excessive noise check for proper installation of th
9. tain recommended vehicle height a WA W A ut Tc ae 1e Specific em over34 Pecomnen A leo Pp NECUI IKE Minko HEINNT IUE EION J lt lt Target Heigk Trin Height Lowering AmountjAd justment f RAG An Side approx _ S FFig 2 oe the e Adjust Co 30mm hown to the right Figure on the diagr ran c lenotes Factory settings Importec QC OSItTION may Cause maximum gt the shock absorber se Insertion position over 9 About 84A PEX NI DAMPER Usage A DANGER Contents under extremely high gas pressure Avoid storing this unit near high temperatures Failure to do so may result in explosion A WARNING This product has been engineered exclusively for the vehicle listed above DO NOT install or use this product with any other type of vehicle Failure to do so may result in injury and death Installation of this product should be performed using the VEHICLE SERVICE MANUAL procedures for the applicable vehicle Installation should ONLY be performed by an experienced installer Failure to do so may result in improper installation and may lead to accidents Installation should be performed at a certified and established repair center PLEASE USE THE FACTORY UPPER MOUNTS for the NI DAMPERS A PEX Integ
10. ter installation be sure to check if all nuts and bolts have been tightened to manufacture specifications Also check for ample clearance between the tire fender and any other related suspension components Never hold the piston rod or cylinder case using tools This could lead to oil leaks from the piston rod and cylinder case Do not drop this product or scratch the piston rod PLEASE Be sure to return this manual to the owner after installation 11 Installation Process A DANGER Always refer to the vehicle service manual when installing this product Always use the appropriate tools and tighten to recommended torque specifications Be sure to follow A PEX recommended installation procedures when they differ from the factory procedure Tighten the Lock Nut to the recommended torque specifications after confirming that there is no spring play with the lower spring seat Failure to do so may cause the Lock Nut to loosen and lead to accidents Always tighten the Lower Spring Seat and Lock Nut to the recommended torque specification A CAUTION Hand tighten the lower spring seat against the spring so that there is no play between the spring and seat Use the assembly diagram to adjust the lower seat to the recommended ride height The recommended height is for reference purposes only Vehicle condition grade year and options will affect actual heig
11. y DAMPER EMA INSTRUCTION MANUAL A PEX N1 DAMPER Height Adjustable Coil Over Damper Kit PRODUCT CODE 269AM020 Tablel Vehicle Application Application Vehicle Vehicle Model Engine Model MITSUBISHI CT9A 4G63 LANCER EVOLUTION 1 Preface Thank you for purchasing the A PEX NIDAMPER system These shocks have been designed to replace the factory shock absorbers Please refer to the contents of this manual for proper installation and use Please read the instruction manual carefully to prevent accidents and bodily harm INSTALLATION SHOULD ONLY BE PERFORMED BY AN EXPERIENCED INSTALLER Please consult the dealer of purchase for a qualified installation facility near you Installation of this unit may not be legal for use on pollution controlled vehicles in California and may never be used upon a public highway Please contact the dealer of purchase with a valid receipt if the product has been damaged during shipping or has a manufacturer defect Never disassemble or discharge the shocks All warranties expressed or implied will be voided if evidence of tampering exists This product must be returned complete with all relevant packing included for warranty to be honored Installation Precaution e Please read the contents of this manual before attempting installation e These shocks have been designed to be use with the factory upper mounts Do not use upper mounts from other manufacturers with this product This manua
Download Pdf Manuals
Related Search
269AM020