Home

Samsung Monitor LED Curvo 29" S29E790C Manual de Usuario

Contents

1. This can only be set when the external input is connected through HDMI DP and PC AV Mode is set to AV 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button The displayed image may differ depending on the model 5 The selected option will be applied Screen Adjustment This menu is only available when Picture Size is set to Screen Fit in AV Mode When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally select Screen Fit to adjust horizontal position in 0 6 levels Not available when PIP PBP Mode is set to On Move the image displayed on the screen to the left or V Position right H Position Move the image displayed on the screen up or down H Position V Position The displayed image may differ depending on the model Configuring H Position amp V Position H Position Move the screen to the left or right V Position Move the screen up or down 1 num A W N When the Function Key Guide appears select LI by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Screen Adjustment controlling the JOG button UP DOWN and press the JOG button Move to the H Position or V Position controlling the JOG button UP DOWN and press the JOG button Adjust the H Position or V Position controlling the JOG button LEFT RIGHT an
2. sa Monitor User Manual S29E790C The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Table of contents Before Using the Product Copyright 5 Securing the Installation Space 6 Precautions for storage 6 Safety Precautions 6 Symbols 6 Cleaning 7 Electricity and Safety 7 Installation 8 Operation 10 Correct posture to use the product 13 Preparations Checking the Components 14 Components 14 Parts 15 Control Panel 15 Direct Key guide 16 Function Key Guide 17 Reverse Side 19 Installation 20 Adjusting the Product Tilt and Height 20 Anti theft Lock 22 Connecting and Using a Source Device Screen Setup Before Connecting 23 Pre connection Checkpoints 23 Connecting and Using a PC 23 Connection Using the HDMI Cable 23 Connection Using the DP Cable 24 Connecting to Headphones or Speakers 24 Connecting the Power 25 Tidying Up the Connected Cables 26 Driver Installation 27 Setting Optimum Resolution 27 SAMSUNG MAGIC Bright 28 Configuring SAMSUNG MAGIC Bright 28 Brightness 30 Configuring Brightness 30 Contrast 31 Configuring Contrast 31 Sharpness 32 Configuring Sharpness 32 Color 33 Configuring Color 33 HDMI Black Level 34 Configuring the HDMI Black Level Settings 34 Eye Saver Mode 35 Configuring Eye Saver Mode 35 Game Mode 36 Co
3. Issues Solutions There is no sound Check the connection of the audio cable or adjust the volume Check the volume The volume is too low Adjust the volume If the volume is still low after turning it up to the maximum level adjust the volume on your PC sound card or software program Video is available but there is no sound Sound cannot be heard if a HDMI DVI cable is used to connect the input device Connect the device using an HDMI cable or a DP cable Issues Solutions A beeping sound is heard when my PC is booting fa beeping sound is heard when your PC is booting have your PC serviced Refer to the user manual for your PC or graphics card for further instructions on adjustment Q amp A Question How can I change the frequency Answer Set the frequency on your graphics card Windows XP Go to Control Panel Appearance and Themes Display Settings gt Advanced Monitor and adjust Refresh rate under Monitor settings Windows ME 2000 Go to Control Panel Display Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel Appearance and Personalization Personalization Display Settings Advanced Settings Monitor and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel Appearance and Personalization Display Screen Resolution Advanced settings
4. Color A detailed description of each function is provided Refer to your product for details Adjust the tint of the screen This menu is not available when aGicBright is set to Cinema or Dynamic Contrast mode This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On Configure color MAGIGBright Custom Fess Brightness 100 Contrast 75 Sharpness l0 Color gt HDMI Black Level Eye Saver Mode Adjust the red Red saturation level Values closer to Green 100 mean greater Blue intensity for the color Color Tone Normal Gamma Mode1 The displayed image may differ depending on the model Configuring Color 1 2 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Color controlling the JOG button UP DOWN and press the JOG button Red Adjust the red saturation level Values closer to 100 mean greater intensity for the color Green Adjust t he green saturation level Values closer to 100 mean greater intensity for the color Blue Adjust the blue saturation level Values closer to 100 mean greater intensity for the color Color Tone Se Cool 2 Set Cool 1 Set Normal Di ect a color tone that best suits your viewing needs the color temperature to be cooler than Cool 1 the color temperature to
5. 1 When the Function Key Guide appears select I by moving the JOG button UP Next press the JOG button available in PBP mode Size ZL 2 Moveto the PIP PBP controlling the JOG button UP DOWN and press the JOG button In PC mode 3 Mowe the JOG button UP DOWN to select Picture Size and then press the JOG button Select the source PIP PBP Mode for each screen In PC mode Auto Display the picture according to the aspect ratio of the each screen input source Size Sound Source Wide Display the picture in full screen regardless of the aspect ratio of the each screen input source Source Picture Size Contrast Picture Size The displayed image may differ depending on the model In AV mode Picture Size The displayed image may differ depending on the model In AV mode 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 21 9 Display the picture of the sub screen with an aspect ratio of 21 9 Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off The function may not be supported depending on the ports provided with the product Changing the screen size is available when the following conditions are satisfied Apply A digital output device is connected using the
6. 3 ove to the Size controlling the JOG button UP DOWN and press the JOG button fo screen is 1280 x wid wid wid Selec Selec hx he Selec hx hei Selec h x hei the ight ght the ght Move to the des D The selected op thei thei icon image if you want 1080 width x height con image if you want con image if you want icon image if you want ion will be applied O O O use use use use PBP mode where the optimum resolution for the left and right sides of the PIP mode where the optimum resolution for the sub screen is 720 x 480 PIP mode where the optimum resolution of the sub screen is 960 x 540 PIP mode where the optimum resolution of the sub screen is 1280 x 540 ired option controlling the JOG button UP DOWN and press the JOG button Config uri ng Position Select the position of the sub screen from the available options 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button Select the position 2 of the sub screen from the available Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button PIP PBP Mode Size opuons 3 Moveto the Position controlling the JOG button UP DOWN and press the JOG button Position Sound Source E ni Ml E 7 Source Not available when PBP is selected Pic
7. E 1 Power off the product and computer 2 Disconnect the power cord from the product Hold the power cable by the plug and do not touch the cable with wet hands Otherwise an electric shock may result 3 Wipe the monitor with a clean soft and dry cloth Donot apply a cleaning agent that contains alcohol were solvent or surfactant to the monitor re bi Do not spray water or detergent directly on the product 4 Weta soft and dry cloth in water and wring thoroughly to clean the exterior of the product 5 Connect the power cord to the product when cleaning is finished 6 Power on the product and computer Electricity and Safety The following images are for reference only Real life situations may differ from what is shown in the images Do not use a damaged power cord or plug or a loose power socket e An electric shock or fire may result Do not use multiple products with a single power socket Overheated power sockets may cause a fire Do not touch the power plug with wet hands Otherwise an electric shock may result Insert the power plug all the way in so it is not loose An unsecure connection may cause a fire Connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result NI Do not bend or pull the power cord with
8. Appearance and Personalization gt Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 8 Windows 8 1 Set power saving mode in Settings Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Chapter 11 Specifications Size General Model Name Panel Size 29 Class 28 7 Inches 73 cm Display area 672 768 mm H x 283 824 mm V Display area 26 5 Inches H x 11 2 Inches V c Hl Pixel Pitch 0 2628 mm H x 0 2628 mm V 0 010346 Inches H x 0 010346 Inches V V Dimensions W x H x D Without Stand 699 5 x 313 5 x 68 5 mm 4 70 kg Weight 27 5 x 12 3 x 2 7 Inches 10 4 Ibs With Stand MIN 699 5 x 423 7 x 262 6 mm 7 20 kg Dimensions W x H x D 27 5 x 16 7 x 10 3 Inches 15 9 Ibs MAX 699 5 x 523 7 x 262 6 mm 7 20 kg mr 27 5 x 20 6 x 10 3 Inches 15 9 lbs Maximum Pixel Clock 198 MHz HDMI DisplayPort Power Supply AC 100 240V 10 96 50 60 Hz 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries Signal connectors HDMI DP Port Model Name S29E790C Environmental conditions Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 96 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 96 95 non condensing Due
9. Size DisplayPort HDMI 1 HDMI 2 4 Control the JOG button UP DOWN and choose the left right external input source Sound Source Source 5 Move the JOG button LEFT RIGHT to select Apply and then press the JOG button Pressing the JOG button after selecting ice ze Cancel will cancel Source configuration and revert back to the PIP PBP control menu Contrast 7 The screen may flicker if the input signal is unstable When the input signal of the left and right screens are the same the operation cannot be performed When the Function Key Guide appears move the JOG button LEFT to select the icon and then press the JOG button The Source same PBP source setting menu appears HDMI 1 DisplayPort Apply Cancel The displayed image may differ depending on the model Configuring Picture Size available in PIP mode Size EA EA E In PC mode PIP PBP Mode Size Position Sound Source Source Picture Size Contrast In AV mode PIP PBP Mode Size Position 4 3 Sound Source 16 9 Source 21 9 Picture Size Screen Fit Contrast The displayed image may differ depending on the model On On a Select the image size for each screen Select the image size for each screen Select the image size for sub screen 1 When the Function Key Guide appears select MM by moving the JOG button UP Next press the JOG button 2 Moveto the PIP PBP controlling the JO
10. Monitor and adjust Refresh rate under Monitor settings Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings How can I change the resolution Windows XP Go to Control Panel Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel Display Settings and adjust the resolution Windows Vista Go to Control Panel Appearance and Personalization Personalize gt Display Settings and adjust the resolution Windows 7 Go to Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution Question How do I set power saving mode Answer Windows XP Set power saving mode in Control Panel Appearance and Themes Display s Screen Saver Settings or BIOS SETUP on the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC Windows Vista Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel
11. Product failure or personal injury may result Installing the product in an unusual place a place exposed to a lot of fine dust chemical substances extreme temperatures or a significant presence of moisture or a place where the product will operate continuously for an extended period of time may seriously affect its performance e Be sure to consult Samsung Customer Service Center if you want to install the product at such a place NI There is a high voltage inside the product Never disassemble repair or modify the product yourself e A fire or electric shock may result Contact Samsung Customer Service Center for repairs To move the product first disconnect all the cables from it including the power cable Damage to the cord may result in a fire or electric shock If the product generates abnormal sounds a burning smell or smoke disconnect the power cord immediately and contact Samsung Customer Service Center e An electric shock or fire may result Do not let children hang from the product or climb on top of it Children may become injured or seriously harmed If the product is dropped or the outer case is damaged turn off the power and disconnect the power cord Then contact Samsung Customer Service Center Continued use can result in a fire or electric shock Do not leave heavy objects or items
12. Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate 7 Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning rate and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Dot Pitch___ The product and screen consist of red green and blue dots A shorter distance between the dots produces a higher resolution Dot pitch refers to the distance between the shortest distance between dots of the same color Dot pitch is measured in millimeters Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal ines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal ines per second are transmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second The horizontal frequency is indicated in 85kHz Vertical Frequency 757 One image is made of numerous horizontal l
13. Low Blue Light Content standards Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Eye Saver Mode controlling the JOG button UP DOWN and press the JOG button Move to the desired option controlling the JOG button UP DOWN and press the JOG button UV A W N The selected option will be applied Set to an optimum icture qualit MAGIGBright Custom a uhay suitable for eye Brightness 100 relaxation Contrast 75 Sharpness 60 Color HDMI Black Level Eye Saver Mode The displayed image may differ depending on the model Game Mode Configure the product screen settings for game mode Use this feature when playing games on a PC or when a game console such as PlayStation or Xbox is connected Not available when PIP PBP Mode is set to On Optimizes image settings for playing Game Mode games Response Time Picture Size Always On Screen Adjustment The displayed image may differ depending on the model Configuring Game Mode 1 mn A WwW N When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Game Mode controlling the JOG button UP DOWN and press the JOG button Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied
14. AV Mode DisplayPort Ver Source Detection Auto Key Repeat Time Acceleration Sound Mode Standard Select Sound Stereo The displayed image may differ depending on the model Configuring Volume 1 UV A W N When the Function Key Guide appears select by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Sound controlling the JOG button UP DOWN and press the JOG button Adjust the Volume controlling the JOG button LEFT RIGHT The selected option will be applied 56 Configuring Sound Mode Volume Sound Mode Standard Select Sound Music Movie Clear Voice The displayed image may differ depending on the model When the Function Key Guide appears select EL by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Sound controlling the JOG button UP DOWN and press the JOG button Move to Sound Mode controlling the JOG button UP DOWN and press the JOG button Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied 1 When the Function Key Guide appears select NM by moving the
15. OR BACK The exterior may differ depending on the product el i a THERE ARE NO USER SERVICEABLE PARTS INSIDE 10 tahsan REFER ALL SERVICING TO QUALIFIED PERSONNEL 10 cm 3 93 Inches I j I 100m ees This symbol indicates that high voltage is present inside 3 93 Inches 3 93 Inches A f TR lt a i It is dangerous to make any kind of contact with any internal part of this product A I i This symbol alerts you that important literature concerning operation and maintenance has been 1 10cm included with this product 1 3 93 Inches CTA a Symbols Precautions for storage High glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used b A serious or fatal injury may result if instructions are not followed nearby 7 Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product Service fee will be charged Personal injury or damage to properties may result if instructions are not followed Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning The following images are for reference only Real life situations may differ from what is shown in the images O
16. Solutions Remove any accessories video extension cable etc and try again Set the resolution and frequency to the recommended level The screen appears unstable and shaky Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product Next if required change the settings referring to Standard Signal Mode There are shadows or ghost images left on the screen Table P81 in this manual and the Information menu on the product The screen is too bright The screen is too dark Adjust Brightness and Contrast Screen color is inconsistent Change the Color se tings The colors on the screen have a shadow and are distorted Change the Color se tings White does not really look white Change the Color se tings There is no image on the screen and the power LED blinks every 0 5 to 1 second The product is opera ing in power saving mode Press any key on the eyboard or move the mouse to return to normal operating mode Text is blurry If using a Windows OS e g Windows 7 Windows 8 or Windows 8 1 Go to Control Panel Fonts Adjust ClearType text and change Turn on ClearType Video playback is choppy Playback of high definition large video files can be choppy This may be because the video player is not optimized for the computer resource Try playing the file on another video player
17. automatically On Activate the off timer so that the product powers off automatically 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Set the monitor to OffTimer automatically turn off after a certain Turn Off After time period The displayed image may differ depending on the model Configuring Turn Off After This option is only available when Off Timer is set to On 1 When the Function Key Guide appears select MM by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Off Timer controlling the JOG button UP DOWN and press the JOG button 2 3 4 Moveto Turn Off After controlling the JOG button UP DOWN and press the JOG button D Adjust the Turn Off After controlling the JOG button LEFT RIGHT 6 The selected option will be applied The off timer can be set within a range of 1 to 23 hours The product will automatically power off after the specified number of hours 7 For products for the market in some regions the Off Timer is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go to MENU gt System and set Off Timer to Off PC AV Mode Supplied for the wide models only such as 16 9 or 16 10 7 If the monito
18. be cooler than Normal mode splay the standard color tone Warm 1 Set the color temperature to be warmer than Normal mode Warm 2 Set the color temperature to be warmer than Warm 1 Custom Customize the color tone When the ex temperature ernal input is connected through HDMI DP and PC AV Mode is set to AV Color Tone has four color settings Cool Normal Warm and Custom Gamma Adjust the middle level of luminance Mode Mode2 Mode3 Move to the de sired option by controlling the JOG button and then press the JOG button The selected option will be applied HDMI Black Level If a DVD player or set top box is connected degradation contrast color degradation b to the product via HDMI image quality ack level etc may occur depending on the connected source device In such case HDMI Black Level can be used to adjust the image quality If this is the case correct the degraded picture quality using HDMI Black Level This function is only available in HDMI 1 or HDMI 2 mode 7 Not available when PIP PBP Mode is se MAGICBright Brightness Contrast Sharpness Color HDMI Black Level Eye Saver Mode The displayed image may differ depending on to On Optimize HDMI picture brightness and contrast by 100 adjusting the black level of the video 75 signal Custom the model Configuring the HDMI Black Level Settings 1 When the Functi
19. before connecting all other cables Before connecting a source device read the user manual provided with it The number and locations of ports on source devices may differ from device to device ns E e Ensure you connect a source device first before connecting the power cable Do not connect the power cable until all connections are completed Connecting the power cable during connection may damage the product Check the types of ports at the back of the product you want to connect Ens o E a HDMI IN 1 HDMI IN 2 gt 1 Connect the HDMI IN 1 or HDMI IN 2 port on the back of the product to the HDMI port on the PC using an HDMI cable 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 3 Change the input source to or controlling the JOG button UP DOWN when input source is not set Provided ports may vary depending on the product Connection Using the DP Cable 7 Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable 1 Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 3 Change the input source to Di
20. it with incorrect voltage or non authorised electrical connections E ot following the cautions in User Manual Others e If product fails by natural disaster lightning fire earthquake flood damage etc e If consumable components are all used up Battery Toner Fluorescent lights Head Vibrator Lamp Filter Ribbon etc If customer requests a service in case the product has no defect service fee may be charged So please read User Manual first Terminology OSD On Screen Display On screen display OSD allows you to customize on screen settings to optimize the picture quality as required You can change the screen brightness tint size and many other settings using menus displayed on the screen HUB HUB refers to a device that is a common connection point for multiple devices connected over a network It is used to connect multiple PCs video devices office devices and or LANs over a single network Gamma____ The Gamma menu adjusts he grey scale that represents middle ones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens he medium brightness Grey scale___ Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white
21. of children Children may suffocate ry LAI Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc e The product may fall and become damaged and or cause an injury Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e Afire or electric shock may result Do not expose the product to direct sunlight heat or a hot object such as a stove The product lifespan may be reduced or a fire may result Do not install the product within the reach of young children The product may fall and injure children Edible oil such as soybean oil can damage or deform the product Do not install the product in a kitchen or near a kitchen counter Do not drop the product while moving Product failure or personal injury may result Do not set down the product on its front The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e The product may fall and become damaged and or cause an injury e Install the product only on cabinets or shelves of the right size Set down the product gently
22. of memory e Atleast 60MB of free space on the hard disk drive Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select Easy Setting Box from the program list and click the Add Delete button Chapter 10 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center test your product as follows If the problem persists contact Samsung Customer Service Center Testing the Product Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a self diagnosis test 1 Power off both the PC and product 2 Disconnect the cables from the product 3 Poweron the product 4 ifthe message Check Signal Cable appears the product is working normally If the screen remains blank check the PC system video controller and cable Checking the Resolution and Frequency For amode that exceeds the supported resolution refer to Standard Signal Mode Table the message Not Optimum Mode will appear for a short time The displayed resolution may vary depending on the product or PC system settings 72 Check the following Installation issue PC mode Issues The screen keeps switching on and off Check t Solutions he cable connection between
23. resolution is not selected the message will appear up to three times for a specified time even when the product is turned off and on again The optimum resolution can also be selected in Control Panel on your PC Chapter 04 Screen Setup Configure the screen settings such as brightness A detailed description of each function is provided Refer to your product for details This menu provides an optimum picture quality suitable for the environment where the product will be used This menu is not available when Eco Saving Plus is enabled This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On You can customize the brightness to suit your preferences In PC mode Picture Set to an optimum SAMSUNG p picture quality MAGICBright suitable for Brightness Standard the working E environment Contrast Cinema Sharpness Dynamic Contrast eo 016 HDMI Black Level Eye Saver Mode The displayed image may differ depending on the model Configuring SAMSUNG MAGIC Bright 1 2 When the Function Key Guide appears select II by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to MaeicBright controlling the JOG button UP DOWN and press the JOG button Custom Customize the contrast and brightness as required Standard Obtain a picture quality suitable for editing docume
24. the optimum resolution and frequency for this product by installing the corresponding drivers An installation driver is contained on the CD supplied with the product If the file provided is faulty visit the Samsung homepage http www samsung com and download the file 1 Insert the user manual CD provided with the product into the CD ROM drive 2 Click Windows Driver 3 Follow the instructions given on the screen to proceed with installation 4 Select your product model from the list of models X SAMSUNG monitor installer Select the display edapter on which you wert to intall te monitor Pe Select the monitor which you want to install Samsung 5 Go to Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase Select a language on the product and change the resolution on your PC to the optimum setting Setup Guide Language English The optimal resolution for this monitor is as follows ESCRAVA XX x Hz Follow the above settings to set the resolution Current Resolution x 1 Select a language by moving the JOG button LEFT RIGHT Next press the JOG button 2 To hide the information message press the JOG button If the optimum
25. the product and PC and ensure the connectors are locked Blank spaces are found on all four sides of the screen when an HDMI or HDMI DVI cable is connected to the product and PC The blank spaces found on the screen have nothing to do with the product Blank spaces on the screen are caused by the PC or graphics card To resolve the problem adjust the screen size in the HDMI or DVI settings for the graphics card If the graphics card settings menu does not have an option to adjust the screen size update the graphic s card driver to the latest version Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings Issues The power LED is off The screen will not switch on Check t Solutions hat the power cable is connected properly The message Check Signal Cable appears Check t hat the cable is properly connected to the product Check t hat the device connected to the product is powered on Not Optimum Mode is displayed This message appears when the signal from the graphics card exceeds the maximum resolution or frequen cy for the product Change the maximum resolution and frequency to suit the product performance referring to Standard Signal Mode Table P81 The images on the screen look distorted Check t he cable connection to the product Issues The screen is not clear The screen is blurry
26. 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 Resolution Horizontal Frequency Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V kHz Horizontal Frequency VESA 800 x 600 46 875 75 000 49 500 The time required to scan a single line from the left to the right side of the VESA 1024 x 768 48 363 60 004 65 000 screen is called a horizontal cycle The reciprocal number of a horizontal cycle VESA 1024 x 768 56 476 70 069 75 000 is called horizontal frequency Horizontal frequency is measured in kHz VESA 1024 x 768 60 023 75 029 78 750 Vertical Frequency R i VESA 1152 x 864 67 500 75 000 108 000 Repeating the same picture dozens of times per second allows you to view natural pictures The repeat frequency is VESA 1280 x 720 45 000 60 000 74 250 called vertical frequency or refresh rate and is indicated in Hz VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 06 500 VESA 1600 x 900 RB 60 000 60 000 08 000 VESA 1680 x 1050 65 290 59 954 46 250 VESA 1920 x 1080 67 500 60 000 48 500 CEA 861 2560 x 1080 66 000 60 000 98 000 Chapter 12 Appendix Contact SAMSUNG WORLD WIDE 7 If you have any questions o
27. Be careful not to get the DC power adapter wet when you wash the floor Do not put the DC power adapter near to any heating apparatus Otherwise a fire may result Keep the DC power adapter in a well ventilated area Do not hold the product upside down or move it by holding the stand e The product may fall and become damaged or cause an injury Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not use humidifiers or stoves around the product Afire or electric shock may result Rest your eyes for more than 5 minutes for every 1 hour of product use e Eye fatigue will be relieved Do not touch the screen when the product has been turned on for an extended period of time as it will become hot Store small accessories out of the reach of children Exercise caution when adjusting the product angle or stand height Your hand or finger may get stuck and injured e Tilting the product at an excessive angle may cause the product to fall and an injury may result Do not place heavy objects on the product Product failure or personal injury may result When using headphones or earphones do not turn the volume too high Having the sound too loud may damage your hearing NJ Correct posture to use the product CHAS Use the product in the correct post
28. D Reset All Stand by The displayed image may differ depending on the model Configuring Power LED On 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto System controlling the JOG button UP DOWN and press the JOG button 3 Move to Power LED On controlling the JOG button UP DOWN and press the JOG button Working The power LED is on when the product is turned on Stand by The power LED is on when the product is turned off 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Reset All Initializing Settings Reset All 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Return all the settings for the product to the default factory settings Move to System controlling the JOG button UP DOWN and press the JOG button Return all the Power LED On Stand by settings for the product to the default factory settings Move to Reset All controlling the JOG button UP DOWN and press the JOG button Reset All Move to the desired option controlling the JOG button LEFT RIGHT and press the JOG button mn A WwW N The selected option will be applied All the menu settings will be reset to default Are you sure you want to reset The displayed image may differ depending on the model Chapter 08 Informati
29. G button UP DOWN and press the JOG button 3 Move the JOG button UP DOWN to select Picture Size and then press the JOG button available in PIP mode Size I EA CI In PC mode e Auto Display the picture according to the aspect ratio of the each screen input source Wide Display the picture in full screen regardless of the aspect ratio of the each screen input source In AV mode 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 21 9 Display the picture of the sub screen with an aspect ratio of 21 9 Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off The function may not be supported depending on the ports provided with the product Changing the screen size is available when the following conditions are satisfied A digital output device is connected using the HDMI DP cable The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals This can only be set when the external input is connected through HDMI DP and PC AV Mode is set to AV 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied PBP Mode Set the Picture Size for each of the divided screens
30. HDMI DP cable The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals Cancel This can only be set when the external input is connected through HDMI DP and PC AV Mode is set to AV 4 Moveto the desired option controlling the JOG button and press the JOG button 5 The selected option will be applied 50 Configuring Contrast available in PIP mode Size E H T Adjust the contrast PIP PBP Mode A level for each screen Size Position Sound Source Source Picture Size Contrast The displayed image may differ depending on the model Adjust the contrast level for sub screen 1 mam A U N When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button Move the JOG button UP DOWN to select Contrast and then press the JOG button Adjust the Contrast controlling the JOG button LEFT RIGHT The selected option will be applied available in PBP mode Size L Adjust the contrast PIP PBP Mode level for each screen Size Sound Source Source Picture Size Contrast CH PBP Contrast lt TT The displayed image may differ depending on the model Adjust the contrast level for each screen 1 mam A U N When the Function Key Guide app
31. JOG button UP Next press the JOG button Configuring Select Sound Move to System controlling the JOG button UP DOWN and press the JOG button 2 Volume 3 Moveto Sound controlling the JOG button UP DOWN and press the JOG button Sound Mode 4 Select Sound Stereo Move to Select Sound controlling the JOG button UP DOWN and press the JOG button Left Channel Stereo Enable the sound both from the left and right speakers Right Channel Left Channel Set the left and right speakers to play only the left channel of the sound source Right Channel Set the left and right speakers to play only the right channel of the sound source 5 Move to the desired option controlling the JOG button UP DOWN and press the JOG button 6 The selected option will be applied The displayed image may differ depending on the model Eco Saving Plus Adjust the power consumption of the product to save Eco Saving Plus energy Sound Off Timer PC AV Mode DisplayPort Ver Source Detection Key Repeat Time Acceleration The displayed image may differ depending on the model Configuring Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel SAMSUNG This option is not available when Ma eicBright is in Dynamic Contrast mode This menu is not available when Game Mode is enabled When the Function Key Guide appears sele
32. UP Source Change Down PRESS ENTER for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below JOG Button Action UP DOWN Move the option Exit the Main menu LEFT Close Sublist without saving value Value decreases in the slider Move to next depth ey Value increases in the slider Move to next depth PRESENTER Save the value and close Sublist Reverse Side Port Description The color and shape of parts may differ from what is shown Specifications are DC 14V Connects to the DC power adapter subject to change without notice to improve quality HDMIIN4 HDMIIN 2 Connects to a source device using an HDMI cable or HDMI DVI cable CAC SAMSUNG DPIN Connects to a source device using a DP cable Connect to an audio output device such as headphones OO The sound could only be heard when using the HDMI to HDMI cable or DP cable SERVICE Dedicated to service technicians DC 14V HDMI IN 1 HDMI IN 2 Installation Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality 2 42 20 2 100 0 mm 2 0 mm The monitor tilt and height can be adjusted Toavoid damage to the product when adjusting the tilt push or pull the top area of the pr
33. When the monitor turns off enters power saving mode or changes input sources Game Mode turns Off even if it is set to On Ifyou want to keep Game Mode enabled all the time select Always On Response Time Accelerate the panel response rate to make video appear more vivid and natural It is best to set Response Time to Standard or Faster when you are not Viewing a movie 7 This menu is not available when PIP PBP Mode is set to On and the Size is set BEE ler Mode Accelerate the panel response rate to make video Response Time Standard appear more vivid and natural Game Mode Picture Size Faster Screen Adjustment Fastest The displayed image may differ depending on the model Configuring the Response Time 1 2 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Response Time controlling the JOG button UP DOWN and press the JOG button Standard Faster Fastest Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied Picture Size Change the picture size 7 This menu is not available when PIP PBP Mode is set to On and the Size is set to Hes Mode In PC mode Choose the size and aspect ratio of the picture displayed Response Time on screen Gam
34. ce DisplayPort Picture Size HDMI 2 Contrast The displayed image may differ depending on the model Select the source for each screen 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button 2 Moveto the PIP PBP controlling the JOG button UP DOWN and press the JOG button 3 Move the JOG button UP DOWN to select Source and then press the JOG button DisplayPort HDMI 1 HDMI 2 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied With the exception of the current input source the other two input sources can be selected The screen may flicker if the input signal is unstable You can use the JOG button to change the input source for the main screen When the Function Key Guide is displayed move the focus left select the IB icon and then press the JOG button The main screen will switch in the order DisplayPort HDMI 1 HDMI 2 PBP Mode Select input sources for the devices displayed on the main and sub screens 1 When the Function Key Guide appears select IJ by moving the JOG button UP Next press the JOG button available in PBP mode Size ZL 2 Moveto the PIP PBP controlling the JOG button UP DOWN and press the JOG button Select the source for each screen 3 Move the JOG button UP DOWN to select Source and then press the JOG button PIP PBP Mode
35. ct LM by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Eco Saving Plus controlling the JOG button UP DOWN and press the JOG button Off Deactivate the Eco Saving Plus function Auto The power consumption will automatically be reduced by about 10 over the current setting The reduction of power consumption depends on the customer screen brightness condition Low The power consumption will be reduced by 25 over the default setting High The power consumption will be reduced by 50 over the default setting Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied Off Timer You can set the product to automatically turn off Sound y Eco Saving Plus Off Timer PC AV Mode DisplayPort Ver Source Detection Auto Key Repeat Time Acceleration Off Timer Turn Off After The displayed image may differ depending on the model Enable or disable the Off Timer Enable or disable the Off Timer Configuring Off Timer 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto System controlling the JOG button UP DOWN and press the JOG button 3 Moveto Off Timer controlling the JOG button UP DOWN and press the JOG button Off Deactivate the off timer so that the product does not power off
36. d press the JOG button The selected option will be applied Chapter 05 Configuring the PIP PBP Settings PIP PBP EEE The PIP Picture in Picture function separates the screen into two parts One source device is displayed on the main screen at the same time the another source device is displayed in inset windows The PBP Picture by Picture function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen Compatible with Windows7 and Windowss The nction may not be available depending on the specifications of the graphics card used If the screen is blank in mode when the optimum resolution is selected go to Control Panel Display Screen Resolution and click Detect on the PC Instructions are based on Windows 7 c an 3 If the screen is blank when the resolution is set to the optimum resolution To maximize the picture quality it is recommended to use a graphics card that supports 2560 x 1080 resolution i 2 ae l ange the resolution to 1280 x 1024 When the function is enabled the resolution will not be able to automatically switch to the optimum resolution 7 The screen may flicker briefly or appear after a delay when you enable or due to a compatibility issue between the graphics card and the Windows system disable the unction or when you change the screen size with the Set to Off or manuall
37. e Mode Picture Size Screen Adjustment The displayed image may differ depending on the model Changing the Picture Size 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Move to Picture controlling the JOG button UP DOWN and press the JOG button 3 Move to Picture Size controlling the JOG button UP DOWN and press the JOG button In PC mode e Auto Display the picture according to the aspect ratio of the input source Wide Display the picture in full screen regardless of the aspect ratio of the input source In AV mode In AV mode 4 3 Display the picture with an aspect ratio of 4 3 Suitable for videos and standard broadcasts Choose the size and 16 9 Display the picture with an aspect ratio of 16 9 aspect ratio of the Game Mode picture displayed e 21 9 Display the picture with an aspect ratio of 21 9 Response Time Sy Screen Fit Display the picture with the original aspect ratio without cutting off Picture Size 4 3 The function may not be supported depending on the ports provided with the product Screen Adjustment 16 9 Changing the screen size is available when the following conditions are satisfied 21 9 ER gt digital output device is connected using the HDMI DP cable Screen Fit The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of nese signals
38. e displayed image may differ depending on the model Configuring Contrast 1 UV A W N When the Function Key Guide appears select OI by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Contrast controlling the JOG button UP DOWN and press the JOG button Adjust the Contrast controlling the JOG button LEFT RIGHT The selected option will be applied Sharpness Configuring Sharpness 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Make the outline of objects more clear or blurry Range 0 100 A higher value will make the outline of objects clearer Move to Picture controlling the JOG button UP DOWN and press the JOG button This option is not available when MagcicBright is in Cinema or Dynamic Contrast mode Move to Sharpness controlling the JOG button UP DOWN and press the JOG button This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On Adjust the Sharpness controlling the JOG button LEFT RIGHT mn A WwW N The selected option will be applied Adjust the SAMSUNG sharpness of the picture Values Brightness 100 closer to 100 mean a sharper image MAGICBright Custom Contrast 75 Sharpness 60 Color gt HDMI Black Level Eye Saver Mode The displayed image may differ depending on the model
39. each item will appear when the focus changes PRESS ENTER The selected item will be applied Icons Description Selects F3 to change the input signal by moving the JOG button in the Function Key Guide screen A message will appear on the top left corner of the screen if the input signal rc has been changed Selects IL by moving the JOG button in the function key guide screen The OSD On Screen Display of your Monitor s feature appears OSD control lock Maintain the current settings or lock the OSD control to prevent oO unintended changes to settings Enable Disable To lock unlock the OSD control press the LEFT button for 10 seconds when the main menu displayed 7 If the OSD control is locked Brightness and Contrast can be adjusted PIP PBP is available Information can be viewed Selects TIN by moving the JOG button in the function key guide screen Lal Press the button when configuring settings for the PIP PBP function is required Selects Q to turn the Monitor off by moving the JOG button in the function key guide screen Actual models because of functional variation Function key guide options will be different Please run the corresponding function based on the actual icon and description When the monitor displays nothing i e Power saving mode or Non signal mode 2 direct keys for control source and power could be used as below JOG Button Power saving Non signal mode
40. ears select O by moving the JOG button UP Next press the JOG button Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button Move the JOG button UP DOWN to select Contrast and then press the JOG button Adjust the Contrast controlling the JOG button LEFT RIGHT The selected option will be applied Chapter 06 Coordinating OSD A detailed description of each function is provided Refer to your product for details Changing Transparency 1 When the Function Key Guide appears select O to display the corresponding menu screen 2 Move to OnScreen Display controlling the JOG button UP DOWN and press the JOG button OnScreen Display Configure the Transparency bitag naal 3 Moveto Transparency controlling the JOG button UP DOWN and press the JOG button Language Off On Display Time o 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button O 5 The selected option will be applied The displayed image may differ depending on the model 55 Language Configuring Language 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Set the menu language A change to the language setting will only be applied to the onscreen menu display Move to OnScreen Display controlling the JOG button UP DOWN and press the JOG button It will not be applied to other functions on your PC Move to Language controll
41. force Be careful not to leave the power cord under a heavy object Damage to the cord may result in a fire or electric shock Do not place the power cord or product near heat sources Afire or electric shock may result Clean any dust around the pins of the power plug or the power socket with a dry cloth Afire may result Do not disconnect the power cord while the product is being used The product may become damaged by an electric shock Only use the power cord provided with your product by Samsung Do not use the power cord with other products e A fire or electric shock may result Keep the power socket where the power cord is connected unobstructed The power cord must be disconnected to cut off power to the product when an issue occurs Hold the plug when disconnecting the power cord from the power socket e An electric shock or fire may result DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES Afire may result Do not install the product in poorly ventilated spaces such as a bookcase or closet e An increased internal temperature may cause a fire Install the product at least 10cm away from the wall to allow ventilation An increased internal temperature may cause a fire Keep the plastic packaging out of the reach
42. from a service technician in the following cases Not a product defect Cleaning of the product Adjustment Explanation Re installation and etc Fa service technician gives instructions on how to use product or simply adjusts options without disassembling product f a defect is caused by external environmental factors Internet Antenna Wired Signal etc f a product is reinstalled or devices are connected additionally after installing the purchased product for the first time f a product is reinstalled to move to a different spot or to move to a different house f customer requests instructions on how to use because of another company s product f customer requests instructions on how to use the network or another company s program f customer requests software installation and setup for the product f a service technician removes cleans dusts or foreign materials inside of the product f customer requests an installation additionally after purchasing a product through home shopping or online A Product damage caused by customer s fault Product damage caused by customer s mishandling or wrong repair If a product damage is caused by e External impact or drop e Use of supplies or separatly sold product unspecified by Samsung epair from a person besides an engineer of outsourcing service company or partner of Samsung ectronics Co Ltd mo J emodeling or repairing the product by customer Using
43. i avai avai avai avai avai able when P 1 Move the JOG bu 2 Move the JOG bu ab ab ab ab ab ab ab ewne e wne ew ew ne SAMSUNG n MAGiGBright is set to Dynamic Contrast mode n Eco Saving Plus is enabled n MAGicBright is in Cinema or Dynamic Contrast mode n Game Mode is enabled n PIP PBP Mode is set to On and the Size is set to DI PBP Mode SAMSUNG n MAGiGBright is in Cinema or Dynamic Contrast mode n Game Mode is enabled IP PBP Mode is set to On on UP DOWN to select Brightness Contrast or Sharpness on LEFT RIGHT to adjust the Brightness Contrast or Sharpness setting Configuring Volume in the Initial Screen You can adjust Volume by moving the JOG button left or right if no OSD menu is displayed Volume lt TT gt 50 Mute The displayed image may differ depending on the model Volume 1 Adjust the Volume controlling the JOG button LEFT RIGHT If the audio quality of a connected input device is poor the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers Set the input volume for the input device to at least 20 and control the volume using the volume control JOG button LEFT RIGHT on the product What is Auto Mute The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak usually due to a p
44. ines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and affects screen flicker Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1920 horizontal pixels horizontal resolution and 1080 vertical lines vertical resolution Plug amp Play 73 The Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play
45. ing the JOG button UP DOWN and press the JOG button 3 Move to Source Detection controlling the JOG button UP DOWN and press the JOG button Auto The input source is automatically recognized e Manual Manually select an input source 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Key Repeat Time Configuring Key Repeat Time 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Control the response rate of a button when the button is pressed 2 Moveto System controlling the JOG button UP DOWN and press the JOG button Configure the Sound response rate of a 3 Move to Key Repeat Time controlling the JOG button UP DOWN and press the JOG button button when the Eco Saving Plus button is pressed Acceleration 1 sec or 2 sec can be selected If No Repeat is selected a command responds only once when a button is Off Timer pressed PC AV Mode Acceleration ee 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button DisplayPort Ver Source Detection 2 sec 5 The selected option will be applied Key Repeat Time No Repeat The displayed image may differ depending on the model Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product Set the status of the Power LED On Working power LE
46. ing the JOG button UP DOWN and press the JOG button Move to the desired option controlling the JOG button UP DOWN and press the JOG button Set the menu language Transparency mn A WwW N engine Sentech The selected option will be applied Display Time English Espa ol Frangais Italiano The displayed image may differ depending on the model Display Time Set the on screen display OSD menu to automatically disappear if the menu is not used for a specified period of time Display Time can be used to specify the time after which you want the OSD menu to disappear Set how long the menu window will remain on screen Language for when it is not in use Transparency Display Time 5 sec 10 sec 20 sec 200 sec The displayed image may differ depending on the model Configuring Display Time 1 When the Function Key Guide appears select LI to display the corresponding menu screen 2 Moveto OnScreen Display controlling the JOG button UP DOWN and press the JOG button 3 Moveto Display Time controlling the JOG button UP DOWN and press the JOG button e 5sec T10 sec 20 sec 200 sec 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Chapter 07 Setup and Reset A detailed description of each function is provided Refer to your product for details System Sound eee Eco Saving Plus Off Timer PC
47. m what is shown Specifications are subject to change without notice to improve quality JOG Button Function Key Guide SAMSUNG RIGHT PRESS ENTER Icons Description Multi directional button that helps navigate JOG Button The JOG button is located on the rear left side of the product The button can be used to move up down left or right or as Enter Press the JOG button when the screen is turned on The Function Key Guide will appear To access the onscreen menu when the guide Function Key Guide is displayed press the corresponding direction button again Function Key Guide may vary depending on the function or product model Please refer to the actual product Direct Key guide S Brightness a gt Volume Features Game Mode Off The shortcut button screen OSD menu shown below is displayed only when the monitor screen is turned on the computer resolution changes or the input source changes UP DOWN Adjust Brightness Contrast Sharpness LEFT RIGHT Adjust Volume PRESS ENTER Display Function Key Guide The function buttons page shows if Game Mode is enabled E off ED On UW Function Key Guide To enter the main menu or to use other items press the JOG button to display the Function Key Guide You can exit by pressing the JOG button again Return UP DOWN LEFT RIGHT Move to the item you want The description for
48. msung com latin_en support English HONDURAS 800 27919267 http www samsung com latin support Spanish 800 2791 9111 http www samsung com latin_en support English JAMAICA 1 800 234 7267 http www samsung com latin_en support 1 800 SAMSUNG 726 7864 English MEXICO 01 800 SAMSUNG 726 7864 http www samsung com mx support NICARAGUA 001 800 5077267 http www samsung com latin support Spanish English http www samsung com latin_en support LATIN AMERICA PANAMA 800 7267 http www samsung com latin support Spanish 800 0101 http www samsung com latin_en support English PARAGUAY 009 800 542 0001 http www samsung com latin support Spanish http www samsung com latin_en support English PERU 0 800 777 08 http www samsung com pe support PUERTO RICO 1 800 682 3180 http www samsung com latin support Spanish http www samsung com English atin_en support TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com http www samsung com English atin support Spanish atin_en support URUGUAY 000 405 437 33 http www samsung com latin support Spanish http www samsung com latin_en support English VENEZUELA 0 800 SAMSUNG 726 7864 http www samsung com ve support Responsibility for the Pay Service Cost to Customers When the service is requested in spite of in warranty we may charge you for a visit
49. nfiguring Game Mode 36 Response Time 37 Configuring the Response Time 37 Picture Size 38 Changing the Picture Size 38 Screen Adjustment 40 Configuring H Position amp V Position 40 Table of contents Configuring the PIP PBP Settings Setup and Reset PIP PBP 41 Configuring PIP PBP Mode 42 Configuring Size 43 Configuring Position 44 Configuring Sound Source 45 Configuring Source 46 Configuring Picture Size 48 Configuring Contrast 51 Coordinating OSD Transparency 53 Changing Transparency 53 Language 54 Configuring Language 54 Display Time 55 Configuring Display Time 55 Sound 56 Configuring Volume 56 Configuring Sound Mode 57 Configuring Select Sound 58 Eco Saving Plus 59 Configuring Eco Saving Plus 59 Off Timer 60 Configuring Off Timer 60 Configuring Turn Off After 61 PC AV Mode 62 Configuring PC AV Mode 62 DisplayPort Ver 63 Configuring DisplayPort Ver 63 Source Detection 64 Configuring Source Detection 64 Key Repeat Time 65 Configuring Key Repeat Time 65 Power LED On 66 Configuring Power LED On 66 Reset All 67 Initializing Settings Reset All 67 Information Menu and Others Information Displaying Information 68 68 Configuring Brightness Contrast and Sharpness from the Initial Screen 69 Configuring Volume in the Initial Screen 70 Volume 70 Installing the Software Easy Setting Box 71 Installing the Software 71 Removing the Software 71 Tro
50. ntact Samsung Customer Service Center e Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objects on top of the product e Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Center e Product failure an electric shock or fire may result Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e Activate power saving mode or a moving picture screen saver if you will not be using the product for an extended period of time Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time vacation etc Dust accumulation combined with heat can cause a fire electric shock or electric leakage Use the product at the recommended resolution and frequency e Your eyesight may deteriorate Do not put DC power adapters together Otherwise a fire may result Remove the plastic bag from the DC power adapter before you use it Otherwise a fire may result Do not let water enter the DC power device or get the device wet An electric shock or fire may result Avoid using the product outdoors where it can be exposed to rain or snow e
51. nts or using Internet Cinema Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content Dynamic Contrast Obtain balanced brightness through automatic contrast adjustment 28 In AV mode When the external input is connected through HDMI DP and PC AV Mode is set to AV waGicBright has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory You can activate either Dynamic Standard Movie or Custom You can select Custom which automatically recalls your personalized picture settings Set to an optimum picture quality suitable for Standard Select this mode when the surroundings are bright This also provides a sharp image Brightness Standard the working 3 Ka aika Movie Select this mode when the surroundings are dark This will save power and reduce eye fatigue Dynamic Select this mode to view a sharper image than in Standard mode MAGIGBright Dynamic Contrast Movie i Custom Select this mode when you want to adjust the image according to your preferences Sharpness Custom ate 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button HDMI Black Level 5 The selected option will be applied Eye Saver Mode The displayed image may differ depending on the model Brightness You can adjust the general brightness of the picture Range 0 100 A higher value will make the picture appear b
52. oduct at the center while holding the top of the stand 20 The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Do not hold the product upside down only by the stand Anti theft Lock An anti theft lock allows you to use the product securely even in public places 7 The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details SAMSUNG 1 Fix the cable of your anti theft locking device to a heavy object such as a desk Put one end of the cable through the loop on the other end nsert the locking device into the anti theft lock slot at the back of the product BS W N Lock the locking device An anti theft locking device can be purchased separately Refer to the user guide provided with your anti theft locking device for details Anti theft locking devices can be purchased at electronics retailers or online Ce Chapter 03 Connecting and Using a Source Device Before Connecting Connecting and Using a PC Check the following before you connect this product with other devices Select a connection method suitable for your PC 7 Connecting parts may differ in different products Pre connection Checkpoints Connection Using the HDMI Cable Do not connect the power cable
53. on Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto Picture controlling the JOG button UP DOWN and press the JOG button 3 Move to HDMI Black Level controlling the JOG button UP DOWN and press the JOG button Normal Select this mode when there is no contrast ratio degradation e Low Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied HDMI Black Level may not be compatible with some source devices The HDMI Black Level feature is only activated at a certain AV resolution such as 720P and 1080P Eye Saver Mode Configuring Eye Saver Mode 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button Set to an optimum picture quality suitable for eye relaxation T V Rheinland Low Blue Light Content is a certification for products which meet requirements for lower blue light levels When Eye Saver Mode is On the blue light that wavelength is around 400nm will become lower and lower and one hour later it will approach the optimum picture quality suitable for eye relaxation At the same time the blue light level is lower than in the default settings and it was tested by TUV Rheinland and certified as it met the requirements of TUV Rheinland
54. on Menu and Others A detailed description of each function is provided Refer to your product for details View the current input source frequency and resolution Displaying Information 1 When the Function Key Guide appears select MM by moving the JOG button UP Next press the JOG button 2 Moveto Information controlling the JOG button UP DOWN and press the JOG button The current input source frequency and resolution will appear Information dil Picture PIP PBP gt OnScreen Display LS29E790CNS EN _ O System DisplayPort RR RK X Gi formation aire Information dil Picture LS29E790CNS EN PIP PBP o OnScreen Display O System HDMI 1 RK X tomar ae Information LS29E790CNS EN dl Picture PIP PBP o OnScreen Display ml O System HDMI 1 HARRY TREE GD information ats DisplayPort e X kHz Hz DisplayPort ee X kHz Hz The displayed image may differ depending on the model 68 Configuring Brightness Contrast and Sharpness from the Initial Screen You can adjust Brightness Contrast or Sharpness by moving the JOG button up or down if no OSD menu is displayed 100 es 5 Brightness i The displayed image may differ depending on the model Brightness ismen is menu Contrast ot avai Is NO is NO is NO Is NO is NO is NO iS NO aval ava
55. ower cable if you will not be using the product for an extended period of time during Vacation etc Standard Signal Mode Table Model Name S29E790C This product can be set to only one resolution for each screen size to obtain Synchronization Horizontal Frequency 30 81 kHz the optimum picture quality due to the nature of the panel Using a resolution Vertical Frequency 56 75 Hz other than the specified resolution may malang ME ene easy te Aha Resolution Optimum resolution 2560 x 1080 this it is recommended that you select the optimum resolution specified for Maximum resolution 2560 x 1080 your product If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatically be adjusted If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank even though the power LED turns on In such a case change the settings according to the following table by referring to the graphics card user manual Resolution Horizontal Frequency Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V kHz IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAG 1152x870 68 681 75 062 100 000 VESA 640 x 480 31 469 59 940 25 175 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156
56. r comments relating to Samsung products please contact the SAMSUNG customer care center NORTH AMERICA U S A 1 800 SAMSUNG 726 7864 http www samsung com us support CANADA 1 800 SAMSUNG 726 7864 http www samsung com ca support English http www samsung com ca_fr support French LATIN AMERICA ARGENTINE 0800 333 3733 http www samsung com ar support BOLIVIA 800 10 7260 http www samsung com cl support BRAZIL 0800 124 421 Demais cidades e regides http www samsung com br support 4004 0000 Capitais e grandes centros CHILE 800 SAMSUNG 726 7864 http www samsung com cl support COLOMBIA Bogota 600 12 72 http www samsung com co support Gratis desde cualquier parte del pafs 01 8000 112 112 6 desde su celular SAM 726 83 LATIN AMERICA COSTA RICA 0 800 507 7267 http www samsung com latin support Spanish 00 800 1 SAMSUNG 726 7864 http www samsung com latin_en support English DOMINICA 1 800 751 2676 http www samsung com latin support Spanish http www samsung com latin_en support English ECUADOR 1 800 10 72670 http www samsung com latin support Spanish 1 800 SAMSUNG 72 6786 http www samsung com latin_en support English EL SALVADOR 800 6225 http www samsung com latin support Spanish http www samsung com latin_en support English GUATEMALA 1 800 299 0013 http www samsung com latin support Spanish 1 800 299 0033 http www sa
57. r is in HDMI 1 HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates press the JOG button to display the function button screen and then select the ON icon You can select PC or AV Set PC AV Mode to AV The picture size will be enlarged This option is useful when you view a movie Configuring PC AV Mode Set to AV to enlarge 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button the picture Sound Move to System controlling the JOG button UP DOWN and press the JOG button Eco Saving Plus Move to PC AV Mode controlling the JOG button UP DOWN and press the JOG button PC AV Mode DisplayPort Ver 2 Off Timer 3 4 Move to the HDMI 1 HDMI 2 DisplayPort controlling the JOG button UP DOWN and press the JOG button Source Detection Auto Set to PC when connected to a PC Key Repeat Time Acceleration Set to AV when connected to an AV device 5 Move to the desired option controlling the JOG button UP DOWN and press the JOG button Select the PC 6 The selected option will be applied AV mode for the DisplayPort DisplayPort source HDMI 1 HDMI 2 The displayed image may differ depending on the model DisplayPort Ver Select your Displayport Displayport 1 1 supports High Bit Rate 1 while 1 2 supports High Bit Rate 2 Select your Displayport Displayport 1 1 Eco Saving Plus supports HBR 1 while 1 2 s
58. righter This menu is not available when MA eicBright is set to Dynamic Contrast mode This menu is not available when Eco Saving Plus is set Adjust the SAMSUNG brightness level Values closer to 100 Brightness mean a brighter MAGICBright screen Contrast Sharpness Color HDMI Black Level Eye Saver Mode The displayed image may differ depending on the model Configuring Brightness 1 mn A W N When the Function Key Guide appears selec Move to Picture controlling the JOG button Move to Brightness controlling the JOG but Adjust the Brightness controlling the JOG b The selected option will be applied O by moving the JOG button UP Next press the JOG button UP DOWN and press the JOG button on UP DOWN and press the JOG button utton LEFT RIGHT Contrast Adjust the contrast between the objects and background Range 0 100 A higher value will increase the contrast to make the object appear clearer This option is not available when Ma eicBri is in Ci or i t t lable when MaeicBright Cinema or Dynamic Contrast mode This menu is not available when Game Mode is enabled This menu is not available when PIP PBP Mode is set to On and the Size is set to EPP Mode Adjust the contrast SAMSUNG p level Values closer MAGICBright to 100 meana Brightness bigger light dark contrast Contrast Sharpness Color HDMI Black Level Eye Saver Mode Th
59. roblem with the volume of an input device To activate the Mute function access the Volume control screen then use the JOG button to move the focus down To deactivate the Mute function access the Volume control screen then increase or decrease the Volume 70 Chapter 09 Installing the Software Easy Setting Box Ed Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the Easy Setting Box setup program If the pop up screen for the software installation does not appear on the main screen find and double click the Easy Setting Box setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Follow the instructions given on the screen to proceed with installation The software may not work properly if you do not restart the computer after the installation The Easy Setting Box icon may not appear depending on the computer system and the product specifications the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation Easy Setting Box The Easy Setting Box installation may be affected by the Graphics Card Motherboard and the Networking Environment System Requirements OS Windows Vista 32Bit 64Bit Windows 7 32Bit 64Bit Windows 8 32Bit 64Bit Windows 8 1 32Bit 64Bit Hardware e Atleast 32MB
60. splayPort controlling the JOG button UP DOWN when input source is not set Provided ports may vary depending on the product Connecting to Headphones or Speakers 7 Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable 1 Connect an audio output device such as headphones or speakers to on the product 7 The sound could only be heard when using the HDMI to HDMI cable or DP cable c4 Connecting the Power SAMSUNG 1 Connect the power cable to the DC power adapter Then connect the DC power adapter to the DC 14V port on the back of the product 2 Next connect the power cable to the power outlet 3 Press the JOG button on the back of the monitor to turn it on The input voltage is switched automatically ES Tidying Up the Connected Cables To remove the COVER CABLE hold and pull the COVER CABLE with your thumb and index finger in the arrow direction while holding the stand with the other hand Insert and fix the cables in the slot Hold the COVER CABLE and fix the cables into the grooves on the STAND REAR Hold the bottom of the stand neck securely with your left hand and use the thumb of your right hand to slide up the COVER CABLE to fix it in place Installation is finished Driver Installation You can set
61. that children like toys sweets etc on top of the product e The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury During a lightning or thunderstorm power off the product and remove the power cable Afire or electric shock may result Do not drop objects on the product or apply impact e A fire or electric shock may result Do not move the product by pulling the power cord or any cable e Product failure an electric shock or fire may result from a damaged cable If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately Sparks can cause an explosion or fire Do not lift or move the product by pulling the power cord or any cable Product failure an electric shock or fire may result from a damaged cable Do not use or keep combustible spray or an inflammable substance near the product An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e An increased internal temperature may cause a fire Do not insert metallic objects chopsticks coins hairpins etc or objects that burn easily paper matches etc into the product via the vent or input output ports etc Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then co
62. to the nature of the manufacturing of this product approximately 1 pixel per million 1 ppm may appear brighter or darker on the panel This does not affect product performance This device is a Class B digital apparatus USA only Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 PowerSaver The power saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode only functions when the product is connected to a PC with a power saving function PowerSaver Power On Power saving mode Power off Power button Power Indicator Off Blinking On Power Consumption 30 6 W Energy Star Test Condition Less than 0 5 W Less than 0 3 W The displayed power consumption level can vary in different operating conditions or when settings are changed ENERGY STAR is a US registered mark of the United States Environmental Protection Agency Energy Star power is measured with the test method in the current Energy Star Standard SOG Sync On Green is not supported To reduce the power consumption to 0 disconnect the power cord Disconnect the p
63. ture Size The screen may flicker if the input signal is unstable Contrast 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied The displayed image may differ depending on the model Configuring Sound Source PIP PBP Mode Size Position Sound Source Source Picture Size Contrast PIP PBP Mode Size Sound Source Source Picture Size Contrast The displayed image may differ depending on the model a Set which screen you want to hear the sound for Set which screen you want to hear the sound for Set which screen you want to hear the sound for 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button 2 ove to the PIP PBP controlling the JOG button UP DOWN and press the JOG button 3 ove to the Sound Source controlling the JOG button UP DOWN and press the JOG button U P mode _ E BP mode LE E U The white area of the icon means that the Sound Source comes from the main screen sub screen or the left right screen 4 ove to the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Configuring Source available in PIP mode Size I EA C3 Select the source PIP PBP Mode for each screen 0 Size E Position E Sound Source Sour
64. ubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 72 Testing the Product 72 Checking the Resolution and Frequency 72 Check the following 73 Q amp A 76 Table of contents Specifications General 78 PowerSaver 80 Standard Signal Mode Table 81 Appendix Contact SAMSUNG WORLD WIDE 83 Responsibility for the Pay Service Cost to Customers 86 Not a product defect 86 A Product damage caused by customer s fault 86 Others 86 Terminology 87 Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited Microsoft Windows are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of the Video Electronics Standards Association Ownership of all other trademarks is attributed to their due owner Securing the Installation Space Safety Precautions Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or greater when installing Caution the product RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER
65. upports HBR 2 Sound Off Timer PC AV Mode DisplayPort Ver Source Detection Key Repeat Time The displayed image may differ depending on the model Incorrect settings may cause the screen to go blank If this occurs check the device specifications If the monitor is in HDMI 1 HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates press the JOG button to display the function button screen and then select the ll icon You can select 1 1 or 1 2 Configuring DisplayPort Ver 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto System controlling the JOG button UP DOWN and press the JOG button 3 Move to DisplayPort Ver controlling the JOG button UP DOWN and press the JOG button gt A Z 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Source Detection You can activate Source Detection Not available when PIP PBP Mode is set to On Decide how input Sound sources will be detected Eco Saving Plus Off Timer PC AV Mode DisplayPort Ver Source Detection Key Repeat Time The displayed image may differ depending on the model Configuring Source Detection 1 When the Function Key Guide appears select ED by moving the JOG button UP Next press the JOG button 2 Moveto System controll
66. ure as follows Straighten your back Allow a distance of 45 to 50cm between your eye and the screen and look slightly downward at the screen Keep your eyes directly in front of the screen e Adjust the angle so light does not reflect on the screen Keep your forearms perpendicular to your upper arms and level with the back of your hands Keep your elbows at about a right angle Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Chapter 02 Preparations Checking the Components Contact the vendor where you Components purchased the product if any components are missing j Components may vary depending on the country The appearance of the components may differ from the images shown Using the HDMI cable that came with the lt A pa AG Sy package is recommended The optimal resolution may not be Warranty card available when using a non high speed Quick Setup Guide A Regulatory guide User manual DMI or HDMI DVI cable Not available in some locations M NA z ADIE The Mini DP to DP gender changer may not be provided depending on the model Y DC power adapter Detachable P25 HDMI cable P23 Mini DP to DP gender Optional Power cable P25 Cleaning cloth Parts Control Panel The color and shape of parts may differ fro
67. y change the resolution to the optimum resolution using the Windows interface function activated This can typically arise when a PC and a monitor are connected to two or more nput sources It has nothing to do with the performance of a monitor The issue is mainly caused when the video signals are delayed in transmission to the monitor depending on the graphics card performance Config uring PI P PBP Mode Enable or disable the PIP PBP Mode function 1 When the Function Key Guide appears select DEI by moving the JOG button UP Next press the JOG button Turn PIP PBP Mode 2 PIP PBP Mode aneron Move to the PIP PBP controlling the JOG button UP DOWN and press the JOG button 3 gt Move to the PIP PBP Mode controlling the JOG button UP DOWN and press the JOG button Off On 4 Moveto the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied The displayed image may differ depending on the model Configuring Size PIP PBP Mode Size Sound Source Source Picture Size Contrast The displayed image may differ depending on the model Select the size and aspect ratio of the sub screen Select the size and aspect ratio of the sub screen 1 When the Function Key Guide appears select IJ by moving the JOG button UP Next press the JOG button 2 ove to the PIP PBP con rolling the JOG button UP DOWN and press the JOG button

Download Pdf Manuals

Related Search

Related Contents

COLORdash Quad - Chauvet Professional  Lavatrice  Dynamode USB-CR-1 card reader  Manual - Nintendo of Europe  Samsung MRK-A00 Manuel de l'utilisateur  APC-6410 Users` Manual - Embedian Inc, The leading ARM Based  Dow Corning 51 Additive  

Copyright © All rights reserved. Failed to retrieve file