Samsung HW-E551 User Manual
Contents
1. TI Z O O Z troubleshootino Before requesting service please check the following Symptom The unit will not turn on A function does not work when the button is pressed Sound is not produced The Remote control does not work The sound from the left right channels are reversed 28 e Is the power cord plugged into the outlet e s there static electricity in the air e s the Mute function on e s the volume set to MINIMUM e Are the batteries drained e s the distance between remote control and main unit too far e Are the left right audio output cables from the TV connected properly Remedy e Connect the power plug to the outlet e Disconnect the power plug and connect it again e Press the Mute button to cancel the function e Adjust the volume e Replace with new batteries e Operate at a close distance e Check the left right channel and connect it them correctly appenak SPECIFICATIONS Model name HW E550 E551 gt Main unit 1 7 kg Y Weight i Subwoofer 7 2 kg z aaa x Dimensions Main unit 1086 x55 x55 mm GENERAL H xD WxHxD Subwoofer 290 x 290 x 380 mm Operating temperature range 5 C to 35 C Operating humidity range 10 to 75 Rated output Main unit 80W CH 30hm THD 10 1kHz POWE Subwoofer 150W 30hm THD 10 100Hz AMPLIFIER Input sensitivity Impedance 570mV 20Kohm S N ratio analog input2. Batteries m AAA size Audio Cable User Manual Adapter m Z Q si Holder screw 6EA aa Screw 6EA Screw 4EA pa B 2EA KA G amp Screw 2EA Power Cord Bracket Wall Mount Bracket Bridge Screw For Subwoofer power gt cable 1EA ASSY STAND 2EA Vi Assy Stand Assystand P Desk Toroidal Ferrite Core USB Cable Speaker Main Assy Cover P Cap 6 The appearance of the accessories may differ slightly from the illustrations above Use the dedicated USB cable to connect external USB devices to the unit descnotions FRONT REAR PANEL 1 DISPLAY Displays the current mode Peha SARAL Plug the power supply cable into the AC wall outlet 3 VOLUME BUTTON Controls the volume level 4 POWER BUTTON Turns the Crystal Surround Air Track on and off When you turn on the power of this unit there will be a 4 to 5 second delay before it produces sound When disconnecting the power cable from the wall outlet hold the plug Do not pull the cable Do not connect this unit or other components to an AC outlet until all connections between components are complete SUBWOOFER FRONT REAR PANEL STANDBY LINK LINK INDICATOR Displays the current STANDBY or LINK indicator POWER SWITCH Turns the Wireless Subwoofer on and off Receives digital video and audio signals simultaneously using an HDMI IN 1 2 JACK HDMI cable Outputs digital video and a
3. 70dB Separation 1kHz 65dB FREQUENCY Analog input 20Hz 20kHZz 3dB RESPONSE Digital input 48kHz PCM 20Hz 20kHz 3dB S N ratio distortion separation and usable sensitivity are based on measurement using AES Audio Engineering Society guidelines Nominal specification Samsung Electronics Co Ltd reserves the right to change the specifications without notice Weight and dimensions are approximate For the power supply refer to the label attached to the product 29 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Asia Pacific AUSTRALIA NEW ZEALAND CHINA HONG KONG INDIA INDONESIA MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM Middle East U A E OMAN KUWAIT BAHRAIN Egypt JORDAN IRAN Morocco Saudi Arabia Africa NIGERIA Ghana Cote D Ivoire Senegal Cameroon KENYA UGANDA TANZANIA SOUTH AFRICA Area Contact Centre amp 1300 362 603 0800 SAMSUNG 0800 726 786 400 810 5858 852 3698 4698 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 0800 112 8888 021 5699 7777 1800 98 9999 1 800 10 SAMSUNG 726 7864 for PLDT 1 800 3 SAMSUNG 726 7864 for Digitel 1 800 8 SAMSUNG 726 7864 for Globe 02 5805777 1800 SAMSUNG 726 7864 1800 29 3232 02 689 3232 0800 329 999 0266 026 066 1 800 588 889 800 SAMSUNG 726 7864 800 SAMSUNG
4. TV that supports the ARC function e Anynet must be turned on This function is not available if the HDMI cable does not support CEC 18 connections CONNECTING THE CRYSTAL SURROUND AIR TRACK This section explains two ways digital and analog of connecting the unit to a external devices This unit is equipped with one optical digital jack and one audio analog jack for connecting a external devices OPTICAL IN DIGITAL AUXIN AUDIO IN LJ OPTICAL Audio Cable Optical Cable not supplied or Red White BD DVD player Set top box Game console O O O 2 A gt OPTICAL IN Connect the Digital Input on the subwoofer to the OPTICAL OUT of the TV or Source Device or AUX IN Connect AUX IN Audio on the subwoofer to the AUDIO OUT of the TV or Source Device Be sure to match connector colors Do not connect the power cord of this product or your TV to the wall outlet until all connections between components are complete Before moving or installing this product be sure to turn off the power and disconnect the power cord f you select AUX without connecting the Audio Cable the set is turned off automatically after 20 minutes fa TV or any device connected to Air Track with the optical cable is off and there is no digital input the Air Track is turned off after 20 minutes If there has been no input signal for over 20 minutes from OPTICAL AUDIO IN the Air
5. button on the Remote control 2 SW O appears on the Display SAT MUTE SMART 3D SOUND 3 Press or button on the LEVEL key if you want to increase or decrease the subwoofer volume You can set it from SW 6 to SW 6 fa on Using the AUDIO SYNC function O 2 E OC Video may look slower than the audio if Air Track is connected to a digital TV swe suet msomo If this occurs adjust the audio delay time to match the video Press AUDIO SYNC button on the remote control of this unit e You can use button to set the audio delay time between O ms and 300 ms g In USB mode BT mode the function may not work E colina Using the DRC function This feature balances the range between the loudest and quietest sounds You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night Press DRC on the remote control of this unit e Each time the button is pressed the selection changes as follows DRC MAX DRC MIN m DRC STANDARD Using the DIMMER function amp LI This feature control the brightness of the Display Press DIMMER on the remote control of this unit e Each time the button is pressed the selection changes as follows DIMMER ON m DIMMER AUTO DIMMER OFF g The display turns off automatically after 5 seconds if set to DIMMER AUTO i O O Using the Anynet HDMI CEC function SAT SOURCE SOUND a Anynet
6. control upward as 2 Installing batteries in the Remote Control Install two AAA size batteries Make sure to match the and ends of the batteries with the diagram inside the compartment 3 Replace the cover Assuming typical TV usage the batteries last for about one year Operation Range of the Remote Control The remote control can be used up to approximately 23 feet 7 meters in a straight line horizontal angle of up to 30 from the remote control sensor 10 It can also be operated at a connections AIR TRACK INSTALLATION OVERVIEW You can choose installation from 4 typical setups CONNECTING THE SPEAKERS TYPE 3 AND 4 1 Installation type 3 and 4 require cabling to the cradle s terminal tabs 2 Press down the terminal tab on the back bottom of the cradle 3 Insert the black wire into the black terminal and the gray wire into the gray terminal and then release the tab 4 Connect the speaker wire plugs to the back bottom of the cradle by matching the colors of the speaker plugs to the speaker jacks 5 Turn on the product Separately installed satellite speakers produce sound 11 Q O Z Z m O O Z connections INSTALLING THE SPEAKERS ON THE STANDING TABLE You can use the standing table to install this unit on a shelf Make sure you place the unit on a
7. flat surface Connecting e To secure the MAIN SET with Standing Table follow instructions below in order to assemble it 1 Assemble the MAIN SET A and B 2 j 2 Attach C D to the rear side of connected A and B Check the screw holes in the rear of the MAIN SET before tightening screw E MAIN SET RIGHT SPEAKER LEFT BRACKET BRIDGE ASSYSTAND P DESK SCREW K Check whether it is installed on a flat and stable position not to fall If the unit falls off it may cause an injury or damage to the product 12 INSTALLING THE SPEAKERS ON THE STAND Separated speakers can be installed on your desired spot individually Connecting e Check both MAIN SET RIGHT speaker LEFT speaker units 1 Check pairs of separated MAIN SET A B and cradles N O J 2 Insert N and O vertically in the MAIN SET A and B respectively Then tighten screw E to the end of the hole 3 When done insert J into the respective soeaker assembly Use screw L to tighten each bottom component as shown e Fit each of ASSY STAND and ASSY COVER P CAP SPK into the corresponding hole before tightening it e For separate type installations two speakers require cabling y to the cradles terminal tabs A B N O J E L K Arrange the cables through the terminal tabs in the rear of the base plate s cradle To separate the speaker unit pull it vertically Q O Z Z m O O Z MAIN S
8. selecting the sound effect See page 25 Before moving or installing the product be sure to turn off the power and disconnect the power cord f the main unit is powered off the wireless subwoofer will be the standby mode and the STANDBY LED and LINK LED on the upper side will come on If you use a device that uses the same frequency 5 2 5 8 GHz near the system interference may cause some sound interruption The transmission distance of the wireless signal between the main unit and sub is about 33 ft but may vary depending on your operating environment If a steel concrete or metallic wall is between the main unit and the wireless subwoofer the system may not operate at all because the wireless signal cannot penetrate metal fthe main unit doesn t make a wireless connection follow steps 1 5 above to retry the connection between the main unit and wireless subwoofer l The wireless receiving antenna is built into the wireless subwoofer Keep the unit away from water and moisture For optimal listening performance make sure that the area around the wireless subwoofer location is clear of any obstructions 16 ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD OF THE SUBWOOFER If you attach a Toroidal ferrite core to the power cord of the Subwoofer it will help to prevent RF interference from radio signals 1 Pull the fixing tab of the Toroidal ferrite core to open it 2 Make two loops in the
9. 726 7864 183 2255 8000 4726 08000 726786 800 22273 021 8255 080 100 2255 9200 21230 0800 726 7864 0800 10077 0302 200077 8000 0077 800 00 0077 7095 0077 0800 724 000 0800 300 300 0685 88 99 00 0860 SAMSUNG 726 7864 Code No AH68 02494A 00 Web Site www samsung com www samsung com www samsung com www samsung com hk www samsung com hk_en www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com www samsung com
10. ET RIGHT SPEAKER LEFT ASSY COVER P CAP MAIN ASSY COVER P CAP SPK ASSY STAND SCREW SCREW 13 connections ASSEMBLED SPEAKER WALL MOUNT You can use the wall mount bracket to mount this unit on a wall Installation Precautions e Install on a vertical wall only e For the installation avoid a location with high temperature or humidity or wall that cannot sustain the weight of the set e Check the strength of the wall If the strength of the wall is insufficient for the product installation make sure to reinforce the wall before the installation e Check the material of the wall If the wall is made of plaster board marble or iron board purchase and use the appropriate fixing screws or mollys e Connect cables from the unit to external devices before you install it on the wall e Make sure the unit is turned off and unplugged before you install it Otherwise it may cause an electric shock MAIN SET RIGHT SPEAKER LEFT BRACKET BRIDGE HOLDER SCREW SCREW HOLDER WALL HORIZONTAL TIM IDIO DIST 1 Place the F on a wall surface and then secure it with two screws not supplied If you are hanging the unit below a TV be sure to install the F so that the arrow 1 is placed in the center of the TV Also make sure the unit is at least two inches 5 cm below the TV 2 Assemble the MAIN SET A and B 3 Attach C to the rear side of connected A and B Check and align screw holes on the rear side of MAIN SET an
11. P protocols are not supported 7 Do not remove the USB device while it is being read 8 DRM protected music files MP3 WMA from a commercial web site will not be played 9 External HDDs are not supported 10 Compatibility list Format Music File name MP3 WMA File extension MPS WMA Bt rat Version V8 Pixel Sampling Frequency 44 1KHz 44 1KHz 11 It is recommended to use the provided USB cable as a vibration may occur depending on the connected USB device Play Pause Stop USB function During playback press the gt II button e Press the BIN button again to stop playing the file temporarily Press the BP Il button to play the selected file e To stop playback press the Stop W button during playback Skip Forward Back USB function During playback press the 14G gt gt I button e When there is more than one file and you press the gt gt I button the next file is selected e When there is more than one file and you press the I 4 button the previous file is selected Using the REPEAT function USB function Repeat playback allows you to repeatedly play a file repeat all randomly play files or turn Repeat off Press the REPEAT button e REPEAT FILE Repeat playing a track e REPEAT ALL Repeat playing all tracks e REPEAT RANDOM Plays tracks in random order A track that has already been played may be played again e REPEAT OFF Cancels Repeat Playback 4 Y
12. Track will be turned off 19 Q O Z Z m O O Z functions BASIC FUNCTIONS BUSY aeta 3920929 262068062 0020020020 22099092002009 390020020029097 2689630080080 2920082 20 062099 gaga 680g 03 tey 100699 99290809 0920929 295204 TV POWER eee gnyeeee SOURCE SOUND SPEAKER SAT MUTE SMART 3DSOUND VOLUME SIWLEVEL AUDIO SYNC o2 26809086 262052068 9929920929921 9092029092002099 290920222020208 002002208002007 9299999990900 390 9999099 3099909 26320 TV POWER SAT SOURCE SOUND SPEAKER SATMUTE SMART 3D SOUND VOLUME SIWLEVEL AUDIO SYNC 20 Turning the power on off 1 Press the POWER 1 button in the right corner Or Press POWER on the remote control to turn on the power 2 Press the POWER 4 button in the right corner Or Press POWER on the remote control again to turn off the power Adjusting the volume Turn the volume control on the right end of the MAIN SET to adjust volume Press VOLUME on the remote control to increase or decrease the volume level e The numeric value of the volume level appears in the front panel display If you want to enjoy the sound only from the Crystal Surround Air Track you must turn off the TV s speakers in the Audio Setup menu of your TV Refer to the owner s manual supplied with your TV ADVANCED FUNCTIONS O i Using the input mode SPEAKER l You can select either D IN A
13. UX HDMI BT input or USB input l E MART Press an appropriate button on the remote control to select a desired mode Gd DLN AUX HDMI BT or USB mode Gi Ga Input mode Display A Optical Digital input D IN a AUX input AUX HDMI input HDMI 1 HDMI 2 E BLUETOOTH mode BT ci USB mode USB The unit turns off automatically in the following conditions e D IN Mode If no input source is entered for 20 minutes e AUX Mode If no cable is inserted in the jack for 20 minutes e BT Mode If no connection is made for 20 minutes e USB Mode If the NO USB or Stop state lasts for 20 minutes The ARC function is activated in D IN mode if the unit is connected to an ARC supporting TV To turn off the ARC function turn Anynet off USING BLUETOOTH You can use a Bluetooth device to enjoy music with high quality stereo sound all without wires What is Bluetooth Bluetooth is a technology that enables Bluetooth compliant devices to easily interconnect with each other using a short wireless connection e A Bluetooth device may cause noise or malfunction depending on usage when Apart of the body is in contact with the receiving transmitting system of the Bluetooth device or the Air Track It is subject to electrical variation from obstructions caused by a wall corner or office partitioning It is exposed to electrical interference from same frequency band devices including medical equipment microwave oven
14. d C fix screws from G to E 4 Then fit the unit into the corresponding slots of the wall mount bracket For secure installation make sure the mounting studs slide firmly down into the bottom of the slots 14 5 This is the completion of the suggested wall mount installation 2 inches 5 cm or more K Do not hang onto the installed unit and avoid any impact to the unit Secure the unit firmly to the wall so that it does not fall off If the unit falls off it may cause an injury or damage to the product When the unit is installed on a wall please make sure that children not pull any of connecting cables as it may cause it to fall For the optimal performance in a wall mount installation keep the speaker system at least 2 inches 5 cm distant from the TV SNOILOANNOOD SEPARATED SPEAKER WALL MOUNT You can use the wall mount bracket to mount this unit on a wall MAIN SET RIGHT SPEAKER LEFT HOLDER SCREW SCREW SCREW HOLDER WALL VERTICAL ASSY COVER P CAP MAIN ASSY COVER P CAP SPK O1Z xX m oO w gt 1 Fix the wall mount bracket on the desired position with 2 screws not provided 2 Insert N and O vertically in the MAIN SET A and B respectively Then tighten screw E to the end of the hole 3 Insert D and K in this order into each of two center holes in the rear of each speaker assembly as shown Then tighten it e For separate type installations two speakers r
15. e is turned off not in place or malfunctions Note that such devices as microwave ovens wireless LAN adaptors fluorescent lights and gas stoves use the same frequency range as the Bluetooth device which can cause electric interference To disconnect the Bluetooth device from Air Track You can disconnect the Bluetooth device from Air Track For instructions see the Bluetooth device s user manual e Air Track will be disconnected e When Air Track is disconnected from the Bluetooth device Air Track will display DISCON on the front display To disconnect Air Track from the Bluetooth device Press the SAT SOURCE button of remote control to switch from BT to another mode or turn off Air Track e The connected Bluetooth device will wait a certain time for a response from Air Track before terminating the connection Disconnection time may differ depending on the Bluetooth device TI Z O O Z e The currently connected device will be disconnected n Bluetooth connection mode the Bluetooth connection will be lost if the distance between the Air Track and the Bluetooth device exceeds 10 meters If the distance between returns to the effective range or you restart the Bluetooth device the Bluetooth connection can be restored If the Bluetooth device comes back in the effective range you can restart to restore the pairing with the Bluetooth device Air Track automatically turns off after 20 m
16. equire cabling to the cradles terminal tabs 4 Then fit the unit into the corresponding slots of the M Holder wall vertical For secure installation make sure the mounting studs slide firmly down into the bottom of the slots e Only the top side part D can be assembled when installing speakers perpendicularly to the main set 15 connections CONNECTING THE WIRELESS SUBWOOFER The Subwoofer s linking ID is preset at the factory and the main unit and sub should link connect wirelessly automatically when main unit is turned on If the link indicator does not light when main unit and subwoofer are turned on please set the ID by following the process below 1 Plug the power cords of the main unit and subwoofer into an AC power supply 2 Press the ID SET button on the back of the subwoofer with a small pointed object for 5 seconds e The STANDBY indicator is turned off and the LINK indicator Blue LED blinks quickly STANDBY LINK 3 While the main unit is powered off STANDBY mode oress SAT MUTE on the remote control for 5 seconds 4 The ID SET message appears on the main unit s DISPLAY 5 To finalize the link turn the main unit s power on while the subwoofer s Blue LED blinks VOLUME SIWLEVEL AUDIO SYNC e The Link indicator blue LED on the subwoofer is turned on e The main unit and the subwoofer are now linked connected e You can enjoy better sound from the wireless subwoofer by
17. imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register HW E550 HW E55 1 features HDMI HDMI transmits video and audio signals simultaneously and provides a clearer picture The unit is also equipped the ARC function which lets you listen to sound from your TV via an HDMI cable through the Crystal Surround Air Track This function is only available if you connect the unit to an ARC compliant TV 3D Depth Sound The 3D sound feature adds depth and spaciousness to your listening experience Wireless Subwoofer Samsung s wireless module does away with cables running between the main unit and the subwoofer Instead the subwoofer connects to a compact wireless module that communicates with the main unit Special Sound mode You can select from 7 different sound modes MUSIC NEWS DRAMA CINEMA SPORTS GAME and OFF Original Sound depending on the type of content you want to enjoy Multi function Remote Control The supplied remote control can be used to control the TV connected to this unit Works only for Samsung TVs The remote contro has a TV hotkey that enables you to perform various operations with the simple press of a button Active Speaker System This unit features an Active Speaker System that provides high sound quality in a single slim unit This unit does not require any satellite loudspeakers or
18. inutes in the Ready state To connect the Crystal Surround Air Track to a USB HOST device 1 Connect USB device to the rear USB port of the sub woofer 2 Press SAT SOURCE button repeatedly until the front display shows USB e Each time the button is pressed the selection changes as follows D IN AUX HDMI BT USB 3 USB appears on the display screen and then play automatically e The Crystal Surround Air Track connection is complete e t automatically turns off Auto Power Off if no USB device has been connected or STOP mode for more than 20 minutes Before you connect a USB device Compatibility USB storage 1 If the folder of file name in a USB device exceeds 10 characters it is not displayed on the VFD 2 This product may not be compatible with certain types of USB storage media 3 The file systems FAT16 and FAT32 are supported e The NTFS file system is not supported 4 Connect a USB device directly to the USB port of the product Otherwise you may encounter a USB compatibility problem 23 24 REPEAT DRC DIMMER AUTO POWER ss TV SOURCE N Jo TV INFO REPEAT DRC DIMMER AUTO POWER TV SOURCE o o o o o o TV INFO VOLUME S WLEVEL AUDIO SYNC POWER SAT SOURCE SOUND TV SOURCE TVPOWER SPEAKER TV INFO 5 Do not connect multiple storage devices to the product via a multi card reader It may not operate properly 6 Digital camera PT
19. is a function that enables you to control other Samsung Devices PALAG n with your Samsung TV s remote control The Anynet function turns on and off each time you press Anynet SS N 1 Connect the product to a Samsung TV with the HDMI cable a Ge See page 18 2 Set the Anynet function on your TV to ON See the TV instruction manual for more information g Depending on your TV certain HDMI output resolutions may not work Please refer to the user s manual of your TV Please check the Anynet logo If your TV has an Amaee logo then it supports Anynet function 26 POWER TV POWER SPEAKER b tton O SAT SOURCE SOUND SAW smar 3000 TV or audio from the Air Track when connected via HDMI ex CD Press SPEAKER on the remote control of this unit AUDIO MODE SPEAKER Scroll Display TV TV SPEAKER brii Air Track AVR SPEAKER ARC TV TV SPEAKER Air Track AVR SPEAKER Using the TV functions This button enables you to select between listening to audio from your Display TV SPK HDMI 1 2 S MUTE TV ARC information 1 Press TV SOURCE on the remote control of AirTrack 2 Press TV INFO on the remote control to display the TV channel 3 Press TV CH on the remote control to select the TV channel 4 Press TV VOL on the remote control to increase or decrease the volume level 5 Use TV PRE CH button to move to the previous TV channel in TV mode 6 To exit the TV me
20. nu use the TV EXIT button Functions same as the EXIT button of the TV remote control g The remote control can operate TVs made by SAMSUNG only SOFTWARE UPGRADE Samsung may offer upgrades for the Crystal Surround Air Track s system firmware in the future If an upgrade is offered you can upgrade the firmware by connecting a USB drive with the firmware upgrade stored on it to the USB port on your Air Track Note that if there are multiple upgrade files you must load them onto the USB drive singly and use them to upgrade the firmware one at a time Please visit Samsung com or contact the Samsung call center to receive more information about downloading upgrades files K Insert a USB drive containing the firmware upgrade into the USB port on the back of the subwoofer Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied The main unit will turn off automatically after completing the firmware upgrade When software is upgraded settings you have made will return to their default factory settings We recommend you write down your settings so that you can easily reset them after the upgrade f the firnware fails to upgrade we recommend formatting the USB data in FAT 16 and trying again For upgrading purposes do not format USB drive in NTFS format because it is not a supported file system Depending on the manufacturer the USB may not be supported 27
21. ou can set the REPEAT function during playback music from USB drive Muting the sound This is useful when answering a doorbell or telephone call 1 To mute sound of this unit press the SAT MUTE OX button of the remote control 2 To mute the TV press the TV MUTE button of the remote control 3 Press SAT MUTE OX TV MUTE on the remote control again or press VOLUME to restore the sound koi Power ron Using the 3D Depth Sound function O O g p DE 1B Dit OF Lad pes SAT SOURCE SOUND SPEAKER DO The 3D sound feature adds depth and spaciousness to the sound Press 3D SOUND on the remote control e Each time the button is pressed the selection changes as follows 3D SOUND LOW 3D SOUND HIGH 3D SOUND OFF g When you turn on the 3D Depth Sound the Sound Effect will automatically change to OFF 9100479 Bi N00 00 0 00 TM 3 w VOLUME SWWLEVEL AUDIO SYNC O O Using the SMART VOLUME function sdice sounD speare This will regulate and stabilize the volume level against a drastic volume Gp Ge change caused by a channel change or scene transition Press SMART VOLUME on the remote control Ka Ka Ka e Each time the button is pressed the selection changes as follows SMART VOLUME ON m SMART VOLUME OFF TI Z O O Z H 8 Dig Of DIO BG Rms ET O06 Bi X O0 00 BO XOD vit POWER Using the Sound effec
22. power cable of the subwoofer 3 Attach the Toroidal ferrite core to the Subwoofer power cord as the figure shows and press it until it clicks INSTALLING TOROIDAL FERRITE TO SUBWOOFER Lift up to release the lock and open the core Close the lock back Make two rounds on the coil with the power cable Start winding at 5 10cm away from the switch 17 Q O Z Z m Q O Z CONNECTING THE CRYSTAL SURROUND AIR TRACK HDMI is a standard digital interface for connection to such devices as a TV projector DVD player Blu ray player set top box and more HDMI removes any loss of signal from analog conversion enabling you to enjoy video and audio sound quality as it was originally created in the digital source HDMIIN HDMI Cable HDMI Cable not supplied not supplied HDMI OUT i Digital Devices HDMI IN Connect an HDMI cable not supplied from the HDMI IN jack on the back of the subwoofer to the HDMI OUT jack on your digital devices and HDMI OUT HDMI e Connect an HDMI cable not supplied from the HDMI OUT jack on the back of the subwoofer to the HDMI IN jack on your TV HDMI is an interface that enables the digital transmission of video and audio data with just a single connector HDMI OUT ARC e The ARC function allows digital audio to input via the HDMI OUT ARC port It can be enabled only when the Air Track is connected to a
23. r s manual What s included Front Rear Panel Subwoofer Front Rear Panel Tour of the remote control Air Track Installation Overview Connecting the Speakers Type 3 and 4 Installing the Speakers on the Standing Table Installing the Speakers on the Stand Assembled Speaker Wall Mount Separated Speaker Wall Mount Connecting the Wireless Subwoofer Attaching the toroidal ferrite core to the power cord of the subwoofer Installing toroidal ferrite to subwoofer Connecting the Crystal Surround Air Track Basic functions Advanced functions Software upgrade Troubleshooting Specifications getting started BEFORE READING THE USER S MANUAL Note the following terms before reading the user manual Icons used in this manual Icon Definition Indicates a situation where a function does not operate or settings may be Cadion canceled K Indicates tips or instructions on the page that help each function operate Safety Instructions and Troubleshooting 1 Be sure to be familiar with the Safety Instructions before using this product See page 3 2 Ifa problem occurs check Troubleshooting See page 28 Copyright 2012 Samsung Electronics Co Ltd All rights reserved no part or whole of this user s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co Ltd WHAT S INCLUDED Check for the supplied accessories shown below a Q Remote Control
24. rack which is a Samsung s proprietary name POWER SAT SOURCE SOUND TV POWER SAT MUTE SMART 3D SOUND Tana AF volume ii SWWLEVEL AUDIOSYNC REPEAT DRC DIMMER AUTO POWER The remote control can operate TVs made by SAMSUNG only Depending on the TV you are using you may not be able to operate your TV with this remote control If you can t operate the TV using the TV s remote control TV POWER BUTTON Turns your Samsung TV on and off Anynet Anynet is a function that enables you to control other Samsung Devices with your Samsung TV s remote control SPEAKER This button allows you to choose to listen to audio from the Air track or your TV This function supports the via an HDMI cable SMART VOLUME 3D SOUND Regulates and stabilizes the volume level against a drastic volume change This feature adds depth and spaciousness to the sound S W LEVEL AUDIO SYNC Adjusts the Subwoofer level Used to help sync video to audio when connected to a digital TV AUTO POWER Synchronizes the Air Track to Optical connection via the Optical jack so it turns on automatically when you turn on your TV TV INFO Display current TV status TV CHANNEL TV VOLUME Switches between the available TV channels Adjusts the TV volume level TV EXIT Exits TV functions same as the EXIT button of the TV remote control 1 Lift the cover at the back of shown the remote
25. s dangerous voltage A inside the product that presents a risk of electric shock or personal injury CAUTION cia A This symbol indicates important instructions accompanying the product WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT e This apparatus shall always be connected to a AC outlet with a protective grounding connection e To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable CAUTION e Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus e To turn this apparatus off completely you must pull the power plug out of the wall socket Consequently the power plug must be easily and readily accessible at all times PRECAUTIONS Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product Install your product horizontally on a suitable base furniture with enough space around it for ventilation 76 102 mm Make sure the ventilation slots are not covered Do not place the unit on amplifiers or other equipment which may become hot This unit is designed for continuous use To fully turn off the unit disconnect the AC plug from the wall ou
26. s and wireless LANs e Pair the Air Track with the Bluetooth device while maintaining a close distance e The further the distance is between Air Track and Bluetooth device the worse the quality is If the distance exceeds the Bluetooth operational range the connection is lost e In poor reception sensitivity areas the Bluetooth connection may not work properly e The Bluetooth connection only works when it is close to the set The connection will be automatically cut off if the distance is out of this range Even within this range the sound quality may be degraded by obstacles such as walls or doors e This wireless device may cause electric interference during its operation 21 22 e e Connect Bluetooth device To connect the Air Track to a Bluetooth device Check if the Bluetooth device supports the Bluetooth Space here compliant stereo headset function 1 Press the SAT SOURCE button on the remote control of AirTrack to display the BT message e You will see WAIT for 4 seconds and then READY on the front display of the Air Track 2 Select the Bluetooth menu on the Bluetooth device you want to connect refer to the Bluetooth device s user manual 3 Select the Stereo headset menu on the Bluetooth device e You will see a list of scanned devices 4 Select AirTrack E550 from the searched list e When the Air Track is connected to the Bluetooth device the device name of the connected Blue
27. speaker cabling which are normally associated with conventional surround sound systems USB Host support You can connect and play music files from external USB storage devices such as MP3 players USB flash memory etc using the Air Track s USB HOST function Bluetooth Function You can use a Bluetooth device to enjoy music with high quality stereo sound all without wires LICENSE DO DOLBY DIGITAL Dolby and the double d symbol are registered trademarks of dolby laboratories 2 0 Channel Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 0 Channel is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved Homi The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries To send inquiries and requests regarding open sources contact Samsung via Email oss request samsung com e This product uses some software programs which are distributed under the Independent JPEG Group Safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicate
28. t O 3 aa You can select from 7 different sound modes MUSIC NEWS DRAMA aw CINEMA SPORTS GAME and OFF Original Sound depending on the type of sources you want to enjoy Press SOUND EFFECT on the remote control e Select OFF mode if you want to enjoy the original sound D 0 0 Bi 00 Oi 5 H 0 0 BiDKOE SAT MUTE SMART 3D SOUND gt i o 00 BO 7 Wi00 VOLUME SIWLEVEL AUDIO SYNC We recommend that you select a Sound Effect based on the source material and your personal taste When you choose the Sound Effect except OFF the 3D Depth Sound will automatically be turned OFF ee aa anc Using the AUTO POWER LINK function To E The Crystal Surround Air Track is automatically turned on when you turn on the vow woa p TV or any device connected to the Air Track with the optical cable Press AUTO POWER on the remote control of this unit e The Auto power link function turns on and off each time you press AUTO POWER AUTO POWER LINK Display ON POWER LINK ON OFF POWER LINK OFF ig Ifa TV or any device connected to Air Track with the optical cable is off and there is no digital input the Air Track is turned off after 20 minutes These functions are available only when the Anynet is turned off 25 O Using the S W LEVEL function ee el You can control the base volume with the S W Level button on the Remote control 1 Press the S W LEVEL
29. tlet Unplug the unit if you intend to leave it unused for a long period of time During thunderstorms disconnect the AC plug from the Do not expose the unit to direct sunlight or other heat sources wall outlet Voltage peaks due to lightning could damage the unit This could lead to overheating and malfunction of the unit Protect the product from moisture i e vases and excess heat The batteries used with this product contain chemicals that are harmful to e g fireplace or equipment creating strong magnetic or electric fields the environment Disconnect the power cable from the AC supply if the unit malfunctions Do not dispose of batteries in the general household trash Your product is not intended for industrial use Use of this product is for personal use only Condensation may occur if your product has been stored in cold tem peratures If transporting the unit during the winter wait approximately 2 hours until the unit has reached room temperature before using contents FEATURES SAFETY INFORMATION GETTING STARTED DESCRIPTIONS REMOTE CONTROL CONNECTIONS FUNCTIONS TROUBLESHOOTING APPENDIX 10 11 11 12 13 14 19 16 17 17 18 20 21 21 28 29 Features License Safety warnings Precautions Before reading the use
30. tooth device followed by Air Track will display CONN on the front display e lf the Bluetooth device has failed to be paired with Air Track delete the previous Air Track E550 found by the Bluetooth device and make it search for Air Track again 5 Play music on the connected device e You can listen to the music playing on the connected Bluetooth device over the Crystal Surround Air Track system e In BT mode Play Repeat Stop Next Back functions are not available You may be required to enter a PIN code password when connecting the Bluetooth device to the Air Track If the PIN code input window appears enter lt 0000 gt The Air Track only supports Middle Quality SBC data up to 237 kbps 48kH2 and does not support High Quality SBC data 328kbps 44 1kH2 The AVRCP feature is not supported Connect only to a Bluetooth device that supports the A2DP AV function You cannot connect to a Bluetooth device that supports only the HF Space here Hands Free function Only one Bluetooth device can be paired at a time Once you have turned off Air Track and the pairing is disconnected the pairing will not be restored automatically To reconnect you must pair the device again Search or connection may not be performed properly by Air Track in the following cases If there is a strong electrical field around Air Track If several Bluetooth devices are simultaneously paired with AirTrack If the Bluetooth devic
31. udio signals simultaneously using an HDMI OUT JACK HDMI cable o1 8 c9 N ID SET BUTTON Used to link the subwoofer to the main unit DIGITAL AUDIO IN Connect to the digital optical output of an external device AUX IN Connect to the Analog output of an external device Connect here and play files from external USB storage devices CSE PORU such as MP3 players U m 07 O D v O Z remote contro TOUR OF THE REMOTE CONTROL POWER BUTTON Turns the Crystal Surround Air Track on and off SAT SOURCE Press to select a connected SAT source SAT Surround Air Track SOUND EFFECT Selects the Sound Effect MUSIC NEWS DRAMA CINEMA SPORTS GAME OFF Original Sound SAT MUTE Mutes the sound from the unit Press again to restore the sound to the previous volume level VOLUME Adjusts the volume level of the unit REPEAT Select Repeat File All Random DRC DIMMER You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night Standard MAX MIN You can control the brightness of the Display CONTROL BUTTON Play pause or stop playing a Music file or search for the Music file next or back TV SOURCE Press to select a connected TV s video source TV PRE CH Moves to the previous TV channel TV MUTE Mutes the sound from the TV Press again to restore the sound to the previous volume level SAT stands for Surround Air T
Download Pdf Manuals
Related Search