Atom user manual
Contents
1. Bluetooth setup for the Atom There are thousands of devices that have Bluetooth facilities Here we will talk you through the most common methos to connect your devices via Bluetooth There may be some variations Before getting started please ensure that Bluetooth is activated on your audio device that it is not already connected Please ensure that the Atom is not charging and the AUX cable is removed Turn on the Atom and then press and hold the power button for 3 seconds until it makes a beep beep sound and the light starts to flash red and blue Now on your audio device enter the Settings menu and then Bluetooth settings and scan for available devices After a few seconds X05 should show on your devices display select the X05 on your device to pair and then to connect When your audio device and the Atom are connected the Atom will emit a couple of Beep sounds and the light on the front of the speaker will slowly flash blue once every few seconds Once the connection has been made the next time you come to use the Atom once powered on it will automatically connect the last last Bluetooth device If a Pin number is required by your audio device please enter 0000 or 8888 For variations play follow the instructions in your user manual Bluetooth Play Music and Hands Free Talking The Atom is able to play all music formats so long as those file types are supported by your audio device Play Pause2. Audio cable 1 0M USB cable 1 0M Connect X05 to Non Bluetooth Device If your device does not support Bluetooth you may connect to the Atom via the 3 5mm AUX input using the supplied cable plug one end into the headphone socket of your phone or tablet P C and the other end into the AUX input that is found on the top of the speaker on the far left of the buttons Please note that the volume controls of the Atom are disabled when connecting in this way and the volume is locked at 50 to protect the speaker from clipping 1 Insert one end of audio cable into the headset jack of your mobile phone and insert the other end into AUX port 2 Turn on both X05 and mobile phone 3 Turn on music player built in mobile phone 4 Adjust by pressing VOL VOL on mobile phone Before disconnecting mobile phone and X05 please firstly turn both of them off Troubleshooting Atom doesn t work 1 If the light on the fron of the speaker is not illuminated when attempting to power the speaker on it may be because the battery has run on Please connect the Atom to a PC or USB charger 2 The speaker is powered off or it has entered standby mode please press the power button until the indicator light turns on 3 Bluetooth connection may have been lost due to the distance between the Atom and mobile tablet obstructions or low battery Continued on page 6 Device Layout 909 O VOL Previous Power Bluetooth Audi
3. Track back Track advance Volume up and down can all be controlled via both the controls on top of the Atom and via your audio device If you receive a phone call while you are connected to the Atom you can answer the call on hands free by pressing the Play Pause button on the Atom to end the call press this button again 4 Dear Sir Madam Thank you for purchasing the X05 Atom V2 Bluetooth Speaker The Atom V2 is our latest variant of the X05 This model features the same amplifier module and enclosure of the original model Version 2 features a 3000mAh battery and adopts Bluetooth V4 0 with apt x profile for superiour wireless bandwidth battery level display and simultanious connection of 2 Atoms to a single device We have now improved the DSP to improve noise reduction and sound The sound quality of the Atom improves over the first 50 hrs of use as the transducers and components bed in Safety Notes Please avoid excessive volume levels that may impair hearing or depending on high levels of distortion may cause damage to your speaker Please keep your speaker away from heat sources liquids and flammable items Your speaker should not be left in reach of infants Please take care when connecting and disconnect the USB and AUX cables and follow the instructions for charging paying particular attention to the output level of your charger If you are unsure please contact us for advice support audiodynamix co uk SS
4. ble is connected yet O O O O O CP while new Bluetooth device is found Red light turns on X05 is in charging status Quick Start guide 1 Using the power button a Power On Press and hold the power button for 5 seconds b Power Off Press the power button for approximately 1 second 2 Bluetooth Setup After the Atom is powered on press and hold the power button for 3 second until you hear a beep and the light flashes red and blue On your audio device turn on Bluetooth and scan for available devices When X05 appears on your display select to pair and connect When the Atom and your device have successfully connected the Atom will make a Beep sound and the light will slowly flash blue 3 If you receive a phone call while you are using the Atom you may answer it by pressing the Play pause button To end the call press again If you wish to decline the call press and hold the Play Pause button for 2 seconds 4 To increase decrease the volume long press the V or V buttons Please note that when connected via Bleutooth the volume can be adjust with your audio device and the Atom but when connection is via the AUX line in the volume controls of the speaker are disabled 5 Track forward or Advance short press the V or V button 6 When the Atom starts to make a Beep Beep sound it needs to be charged 7 When the Atom is charging the red light will on when the battery is
5. c 1 Bluetooth connect corruption can occur when devices have been paired for a period of time when you have numerous Bluetooth devices saved in the memory or due to a glitch in thid instances please unpair the Atom and your device and make a new pairing 2 Check whether the music is paused 3 Check the volume level on the Device and the Atom 4 Is the Atom connected to another device via AUX 5 is the battery running low Music is suspended Check whether the Atom is running out of power and charge Technical Parameters Model X05 Atom V2 Rated power 2 x 5watts RMS Battery 3 7V 3000mAh Lithium rechargeable Compatible charger Up to 5V and 1000mAh Charge time 3 5hours via USB or until red light goes out Playtime 10hrs to 30hrs Bluetooth Version 4 0 Bluetooth range 15 metres average and up to 40mtrs line of sight Stereo isolation 40db Frequency range 42Hz to 19Khz Input Sensitivity 800mv Range can be affected by the transmitter strength of the audio device Enviromental conditions and remaining charge Playtime as measured during independant tests with variations in Volume music content temperature and input type 6 Bluetooth Connection Blue light turns on no audio cable or Bluetooth device is connected yet in this case you may connect X05 to Bluetooth device mobile phone as it did last time Blue and red light blink alternately LINEIN V Yeu V no audio ca
6. full the red light will go off In order to maintain battery capacity please fully discharge and charge the battery every three months whether you use it or not during such period 3 Terms and Conditions of Warranty Audio Dynamix Ltd offer a standard 12 month warranty that covers defects in materials and or production In the event of a defect the speaker will be replaced or refunded if less then 28 days have passed since the date of purchase After this period a repair will be offered If the speaker cannot be repaired within a 14days of receipt of return the speaker will be replaced The warranty will be void where it is deemed that the defect was caused by the negligent use Negligent use includes but is not rescricted to 1 Not charging the battery in line with the User Manual 2 Exposing the speaker to excessive heat humidity or forces 3 Damage caused by lack of care and historical neglect drop damage contact with fluids or excessive ouput If you have any questions or you require help please contact us at support audiodynamix co uk Name and Content of Toxic or Hazardous Substances and Elements According to Management Methods for Controlling Pollution by Electronic Information Products Toxic or Hazardous Substances and Elements indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part is belo the limit requirement in SJ T 11363 2006 X indicates that thi
7. o input Indicator Light Charge the Battery The lithium battery requires charging when the light on the fron of the Atom starts to blink red twice every few seconds The light will be accompanied by a tot tot sound If the speaker is not charged shortly after this point it will shutdown The speaker can be charged via a USB from a PC or mains charger When fully charged the red light will turn off Chargers should be 5volts 1000mAh No PC or USB charger attached with this device Indicator light 1 Insert DC port of cable into X05 via the jack of USB port 2 Insert USB port of cable into PC or Charger When the battery is being charged the red light turns on Once the battery is fully charged the red light turns out It takes 2 to 3 hours to fully charge the battery The working hours may vary dueto volume exterior environment and other factors You may use this device in charging status however it may need long time for charging battery The Atom fails to connect to via Bluetooth 1 Check that Bluetooth is activated on your audio device and that the Atom is paired 2 If you are unable to connect to Bluetooth with your Windows based Tablet PC or laptop it may be because your drivers need updating please visit the manufacturers website 3 Check that you entered the correct PIN number 0000 4 When searching for the Atom please ensure that your audio device is Discoverable Fails to play musi
8. s toxic or hazardous substance contained in all the homogeneous materials for this part is above the limit requirement in SJ T 11363 2006
Download Pdf Manuals
Related Search