Hampton Bay ES4732OB4 Installation Guide
Contents
1. assembly CC to the existing outlet box with the outlet box screws AA provided Installation 2 Installing the threaded rod assembly and bulb o Secure the threaded rod assembly E to the fabric shade assembly C and tighten it using the hex nut on the threaded rod assembly E o Install the light bulbs sold separately CAUTION Refer to the re lamping label located on the fixture Do not exceed the recommended wattage 3 Installing the diffuser o Install the diffuser G over the the threaded rod assembly E and secure it with the diffuser nut DD 4 Installing the chain assembly o Remove the ring F from the loop of the chain assembly A cc o Adjust the chain to the desired length by removing links if necessary 0 Thread the chain assembly A through the canopy D and leave the ring F under the canopy D Q Thread the fixture wires up through the tube of the mounting bracket assembly CC 0 Secure the mounting bracket assembly CC into the D chain assembly A as shown Installation 6 Making the electrical connections o Attach the ground wire from the outlet box to the ground screw on the mounting bracket CC which is green and marked GND Connect the negative wires raised ribs without writing from the fixture to the negative wires from the supply circuit the positive wires smooth with writing from th2. Item rrterereee Fkk kkk kkk Model ES47320B4 ES47620B4 USE AND CARE GUIDE PENDANT FIXTURE THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this pendant fixture We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home improvement needs Thank you for choosing Hampton Bay Warranty 5 YEAR LIMITED WARRANTY The manufacturer warrants this lighting fixture against defects in materials and workmanship for a period of five year s from the date of purchase If within this period the product is found to be defective in material or workmanship the product must be returned with a copy of the bill of sale as proof of purchase to the original place of purchase The manufacturer will at its option repair replace or refund the purchase price to the original purchaser or consumer This warranty does not cover light bulbs or the fixture becoming damaged due to misuse accidental damage improper handling and or installation and specifically excludes liability for direct incidental or consequential damages Some states do not allow exclusions or limitations on an implied warranty so the above exclusions and limitations may not apply This warranty gives you specific rights and you may also have other rights that vary from state to state Contact the Customer Service
3. Team at 1 877 527 0313 or visit www homedepot com Questions problems missing parts Before returning to store call Commerial Electric Customer Service 8 a m 6 p m EST Monday Friday 1 877 527 0313 HOMEDEPOT COM Retain this manual for future use Safety Information IMPORTANT SAFETY INSTRUCTIONS Save These Instructions o Read all instructions prior to beginning the installation process o Make sure the power is turned off at the electrical panel box before beginning your installation Turning the power off at the wall A CAUTION Turn off unplug the light and switch is not sufficient to prevent electrical allow it to cool before replacing the bulb shock o This fixture is intended to be mounted to a 4 in square x 2 1 8 in deep metal octagon outlet box A CAUTION Keep the lamp away from The box must be directly supported by the materials that may burn building structure o All electrical connections must be in accordance with local codes and the National Electrical Code If you are unfamiliar with methods of installing electrical wiring secure the services of a qualified licensed electrician WARNING Do not install this lighting A system in a wet location Care and Cleaning CAUTION Do not use chemical solvents or harsh abrasives to clean the fixture or components as damage may occur o To clean the fixture first disconnect the power to the fixture by turn
4. e fixture to the positive wires from the supply circuit and the ground wire bare from the fixture to the ground wire from the supply circuit using the wire connectors BB Wrap electrical tape not included around the wire connectors BB and ensure they are secure Push all excess wire and wire connections back into the outlet box 7 Installing the canopy to ceiling o Raise the canopy D up to the outlet box O Slide the canopy D over the loop of the chain assembly A and secure it to the ceiling using the ring F o Adjust the length of the mounting bracket assembly CC stud and hex nut if necessary Troubleshooting Problem Possible Cause Solution The light bulb will not The light bulb is burned Replace the light bulb illuminate out The power is off Make sure the power supply is on Check the wiring Contact a qualified and licensed There is a faulty wire connection troubleshooting wiring problems electrician if you are not comfortable There is a faulty switch Test or replace the switch The fuse blows or the circuit There are crossed wires breaker trips when the light bulb or the power wire is not is illuminated properly grounded Check the wire connections
5. ing off the circuit breaker or by removing the fuse at the fuse box Usea dry or slightly dampened clean cloth use clean water never use a solvent to wipe the interior and exterior surfaces of the xture o Allow the fixture to dry completely before power is restored Pre Installation PACKAGE CONTENTS F B D lt E A A _ C G Part Description Quantity A Chain assembly Lamp cup assembly Fabric shade assembly Canopy Threaded rod assembly Ring preassembled on the chain assembly A ojn mj oj ojo a j a a t ii a Diffuser Pre Installation Ladder Gloves HARDWARE INCLUDED Safety goggles Phillips screwdriver Electrical tape Wirestripper A NOTE Hardware not shown to actual size Outlet box screws n IIF AA BB CC DD Wire connectors Mounting bracket assembly Diffuser nut x2 x3 x1 x1 Installation r o Installing the fixture body F Secure the lamp cup assembly B to the fabric shade assembly C and tighten it A in place Je Secure the chain assembly A to the lamp d cup assembly B c Weave the fixture wires through the links up to the ring F Installation o o o Installing the mounting bracket assembly Outlet box Make sure the power is off Pull the supply wires down out of the outlet box Attach the mounting bracket
Download Pdf Manuals
Related Search