Alsa Refinish PC-777QKit Instructions / Assembly
Contents
1. Prizmacoat HOW TO APPLY PRIZMACOAT Prizmacoat is a unique material with an extremely wide variety of applications Most commonly used over an existing paint color and then clear coated for a glossy look and added depth and durability It can however also be used over many other type surfaces by simply applying 1 2 light dust coats over the surface and then clear coating as above It can if desired be left UN clear coated and will last for some time this way but the effect will very likely diminish over time especially if being handled It will also not be glossy looking without a clear coat 1 Always apply paints in a well ventilated area and wear a NIOSH approved respirator to avoid breathing any fumes 2 Make sure you have good conditions for spraying The best temperature for spraying this paint is 75 80 degrees F and VERY low humidity 3 If your piece is already base coated you can proceed to step 7 4 Begin by prepping the surface as you would for any paintjob prime sand etc Epoxy primers for bare metal and primer surfacers for plastic wood fiberglass etc 5 Apply your choice of base colors For the most dramatic pop we recommend Stylin Basecoat Jet Black KC ASB 13 6 Allow the base to dry as recommended usually 10 15 minutes Air dry 7 Apply 2 light dusting coats of the Prizmacoat 8 You will now want to shine a bright light on the surface to decide if you have achieved the desired2. effect If so you can now go on to the next step otherwise for an additional blast of color explosion add more coats as desired being sure to apply in light coats Applying Prizmacoat too heavily will cause the Flakes to stack and ruin the effect 9 Allow the Prizmacoat to dry usually 5 minutes Air dry 10 You can now topcoat it with any high quality automotive clearcoat
Download Pdf Manuals
Related Search