StepSaver 7100-10 Instructions / Assembly
Contents
1. Wipe the area clean place the tape over the crack or joint press firmly on the outside of the damaged area cut to size paint directly Options skim for a smooth surface or texture for a textured surface it is best to install the tape when crack is closed Enjugue el area limpia coloca la cinta sobre la grieta o la coyuntura prensa firmemente por fuera del area da ada el corte para calibrar pintar directamente Las opciones espuma para una superficie o la textura lisas para una superficie con textura i are E STICK SKIM PAINT Cut to the desired length a Painting with a roller is recommended ag Make sure that the area to be repaired is clean and dry Remove backing while applying the tape Press firmly outside of the damaged area while applying The crack to be covered must be even not higher on one side For long irregular cracks run the tape end to end slightly overlapping For a perfect match on smooth walls skim the edges of the tape For textured walls you can blend with a can of spray texture On corners crease in the desired direction prior to removing the backing Can be used to repair the edges of mis cut outlets Can be used to repair smaller holes as well On large cracks install the tape when the crack is closed Checkout our demonstration videos online at lt www youtube com StepSavers ine ai If the your crack opens amp closes from a narrow crack to a wider2. crack then back We strongly recommend that you install the tape when the crack 1s closed in its tightest position The tape 1s designed to stretch with the crack then return However if you install when the crack is open then it closes it will push out then go flat when it opens again You can install on hairline cracks and non moving static cracks anytime gets Edges can be skimmed on smooth flat walls for a perfect match For Indoor use only
Download Pdf Manuals
Related Search