Home

Toshiba L2443/32 User's Manual

1. a decoder could IU be Digital Satellite or any other compatible decoder A Model will determine power cord position s TOSHIBA POWER CORD gt media recorder pa decoder HDMI 1 INPUT SOCKET MEDIA REC pwa a G SCART 1 INPUT TV OUT pew mue _ IN OUT SAT A Aerial cables Nan Connect the aerial to the ANT socket on the rear of the television If you use a decoder and or media recorder connect through the decoder and or media recorder to the television Q Satellite cable x Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV You can receive TV radio interactive TV and HD TV with clear reception SCART cables Connect the video recorder IN OUT or decoder TV socket to the television Connect the media player SAT socket to the decoder MEDIA REC socket Before running Auto Tuning put your decoder and media recorder to Standby HDMI High Definition Multimedia Interface is for use with a DVD decoder or electrical equipment with digital audio and video output It is designed for best performance with 1080i high definition video signals but will also accept and display 480i 480p 576i 576p 720p and 1080p HDMI1 also support VGA SVGA XGA WXGA and SXGA NOTE Although this television is ab
2. RETURN Skip Forward ROOT Root key DVD DVD key CONTENTS Contents key TOP Top key In contents menu A V lt 4 gt Navigate contents menu 3 Enter contents menu etc NOTE These functions depend on the devices connected 52 Using MHL TV Function You can use the following functions by connecting between the TV HDMI 2 port and micro USB port of mobile phones etc with a MHL cable e Charge with mobile phone from TV e Video Audio output from mobile phone e Access mobile content through TV remote controller e Supports transfer of HD video resolution up to 1080p e MHL functions may not perform properly as some mobile devices may not incorporate the full MHL functionality NOTE These functions may not be available depending on the connected equipment MHL Control 1 Press QUICK Press A or YW to select Connecting an MHL compatible Device Connect the device to the HDMI 2 port on the TV using an MHL cable not supplied HDMI 2 o gt el micro USB SSS g MHL cable not supplied When you connect an MHL compatible device to the HDMI 2 port on the TV with the MHL cable charging starts automatically NOTE Do not connect an MHL compatible device to any port other than the HDMI 2 port 53 MHL Control and press Quick access PVR Control Picture Size Wide Picture Mode Standard Sleep Ti
3. Do DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and inter connections between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels on equipment WARNING To prevent injury this apparatus must be securely attached to a solid base in accordance with the installation instructions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND LIVE PARTS THE MAINS PLUG IS USED ASA DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE Do Not DO NOT obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage and shorten the life of the equipment DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DO NOT place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires WARNING To prevent the spread of fire keep candles or other open flames away from this
4. to select Enable HDMI LINK and press lt or gt to select HDMI CEC Control On On On TV Speakers Back its input source changed or the volume adjusted the sound will be output from the AV Amplifier s speakers even if TV speakers has been selected Turn the television off then on again to output the sound from the TV s speakers The full function may not work and is dependent on the amplifier being used 50 Auto Power On The Auto Power On setting allows the television to be automatically switched On if user pressed Play key on the HDMI CEC device o In the HDMI CEC Control menu press A or Y to select Auto Power On D Press lt or gt to select On or Off Auto Standby When the Auto Standby is enabled switching off the television will automatically switch off all connected HDMI CEC equipment 1 In the HDMI CEC Control menu press A or Y to select Auto Standby D Press lt or gt to select On or Off Amplifier Control When Amplifier Control is set to On it allows the Speaker Preference feature to become available 1 In the HDMI CEC Control menu press A or Y to select Amplifier Control 2 Press lt or gt to select On or Off Speaker Preference This feature allows the audio output preference to be set to the TV speakers or Amplifier speakers The Amplifier option lets the television s remote control adjust or mute the volume of the audio o In the HDMI CEC Control m
5. 13 Mute the sound 14 Display the QUICK access menu 15 Exit the menu system 16 Display EPG 17 Goto the previous level of the menu 18 Display the on screen menu 19 Menu navigation A V lt gt In Text mode Change the page Confirm the selection 20 Colour button Text control buttons E Reveal concealed text Hold a wanted page E Enlarge text display size OE Select a page while viewing a normal picture Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round Suitable battery types for this remote are AAA 1 5V Do not combine a used old battery with a new one or mix battery types Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment Dispose of them in accordance with instructions on page 71 of this manual Warning batteries must not be exposed to excessive heat such as sunlight or fire The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television If the operating range becomes reduced the batteries may need replacing Connecting External Equipment Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket ILLUSTRATION SHOWS 32L244
6. PVR Control Picture Size Picture Mode Sleep Timer Press A or to select Recording Start and press W View a Record Programme To view the recorded Library screen and select a title from the recorded programme list Press MENU Press lt or gt to select SETUP and press to enter the PICTURE SOUND APPLICATIONS PREFERENCES submenu SETUP Press A or to select Library and press Automatic Power Down Location Library Software Upgrade System Information Reset TV Enter Back Press A or Y to select the content you want to view Press the button on the remote to see the preview of selected content Library All Sort Genre 15 vo EB Hole in the Wall v B Bondi Vet sen Crafting with jem s Designs B Extreme Makeover Home Edtion FE Gilmore Giris Thu 27 10 11 03 11 06 1 11 03 00 02 50 Remaining Capacity 87 3356 MB H Protect Delete sort E Piay Back Press to start content 19 Dave English Play Hole in the Wall SD 169 11 03 11 06 E Show Game Show EI ad AD Daie Winton hosts the fun physical challenge show in which celebrities squeeze through holes in giant moving walls Contestants include Phil Tufnell Nancy Lam and Carrie Grant 57 Protect a Record Programme Protecting a programme prevents it from being accidentally deleted In Library menu press A or to select th
7. and Hotbird 13 e DiSEqC 4way automatically switches between up to four LNBs satellites e Single Cable is selection and control of plural Satellite antennas through the combined single antenna cable Press A or VW to select LNB Power and press lt or gt to select On or Off Press A or to select a satellite and press 6 to change further settings Satellite Settings Switch Type LNB Power No Satellite 2 3 4 Transponder 1 122 10714 MHz Lower LOF 9750 Upper LOF 10600 Edit Back It is possible to select up to four satellites Please note that the number of available LNBs and the adjustment of your satellite dish determines the number of satellites found For further information on satellite signal technology please contact your local dealer Press lt or gt to select Satellite or LNB and press Press A or W to change the setting Satellite Settings Switch Type LNB Power Satellite ASTRA 19 2 E Transponder 1 122 10714 MHz Lower LOF 9750 Upper LOF 10600 Ey Change Save i Transponder Settings Press A or VW to select Done and press 18 D If you select Single Cable in step 9 the Single Cable Settings menu appears Press A or W to select User Slot Number User Slot Frequency Password PIN Reset or Verify Slot Frequency and press lt or gt to change the setting Single Cable Settings User Slot Number U
8. lt or gt to select SETUP and press to enter the submenu Press A or to select DTV Manual Tuning and press to enter the submenu Language Country Tuner Mode Satellite Settings Auto tuning English Germany Antenna ATV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Enter Back Press A or Y to select RF Channel and press lt or gt to select or use number key pad on the remote to enter a channel DTV Manual Tuning Weak Average Signal Strength Quality Tuner Mode RF Channel Frequency Start Scan Input Back Press A or Y to select Start Scan and press to start tuning DTV mode Cable Press MENU Press lt or gt to select SETUP and press to enter the submenu Press A or V to select DTV Manual Tuning and press to enter the submenu Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Enter Back 23 Press A or to select Frequency Modulation or Symbol Rate and use number key pad on the remote to define the information or select Auto for tuning DTV Manual Tuning Weak Signal Strength i Quality Average 113 000 MHz Qam 16 6900 KS s OK J Frequency Modulation Symbol Rate Start Scan Input Press A or Y to select Start Scan and press to start tuning Back DTV mode Satellite Press MENU
9. to enter the submenu Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Enter Back Press A or to select the programme position you want to arrange and then press P ATV Manual Tuning Enter Back Press A or V to move through the list to your preferred position As you do so the other stations will move to make room Press lt to store programme position ATV Manual Tuning Back 5 Press to display the breakdown menu Press lt or gt to select an item then press A or Y to select the item as shown below ATV Manual Tuning Position The number to be pressed on the remote control System Specific to certain areas Colour system Factory set to Auto should only be changed if problems are experienced i e NTSC input from external source Skip s means nothing has been stored or the facility to skip the channel is On Signal Class The channel classification Channel The channel number on which a station is being broadcast Searching Search up and down for a signal Manual fine tuning Turn on to execute fine tune function Turn off to execute manual fine tune function Station Station identification Use the A or V and lt or gt buttons to enter up to seven characters oB Press to save DTV mode Antenna 1 Press MENU Press
10. 8KHz 48KHz Bit Rate lt 1 5Mbps DIS Sampling rate lt 48KHz Play Music Files 3 Press A or to select the folder you Insert a USB storage device and press wish to play and press W to enter on the remote Press P Aor P Y to page up or down Use A or to select MEDIA and press EY Up Folder BE cores Page Ef Move BE select 2 Press lt or gt to select Music and press to enter the submenu Be uszo 44 Press A or F to select the desired music and press to play Folder 00 00 02 0002 2 a 16 00001 00003 lt a rmP er Bee 001 MP3 Pause Ef Move Select Back When listening music press lt or gt to DO Play or pause the selected music Kl Rewind the selected music Ed Fast forward the selected music El Goto the previous music e Ed Go to the next music Stop play E Select the desired repeat interval Repeat Off Repeat One Repeat the selected music once Repeat Folder Repeat all music files in the selected folder El show play list E Music information and press to confirm the setting Repeat Settings Press lt or P to select Press x to select Off One or Folder Using the Play List Press lt or gt to select El and press Press A or to select music and press to play music Press EXIT on the remote to collapse the list 002 mp3 003 mp3 E E E E E e a E Ty Foder vow NS
11. 9750 Upper LOF 10600 E Change Save Transponder Settings Press the mE button on the remote to enter Transponder Settings menu Transponder Settings Frequency Polarisation Symbol Rate S S2 P Cancel M Reset Done amp Press A to select a new line and press Transponder Settings Frequency Polarisation Symbol Rate S S2 P Cancel M Reset Done Edit o Edit each parameter as required and press 6x Delete a transponder 1 In the Transponder Settings menu press A or F to select the transponder you want to delete 2 Press the mai button on the remote to delete the selected transponder amp Press lt or gt to select YES to confirm or select NO to exit and press NOTE It is not possible to delete posi tion No 1 Edit the transponser settings 1 In the Transponder Settings menu press A or to select the transponder you want to edit and press 2 Press lt or gt to select Frequency Polarisation Symbol Rate or S S2 and press A or to change the setting Transponder Settings Frequency Polarisation Symbol Rate Input Enter Back Press 6 to save settings Press the mE button on the remote to cancel any edits that were made Press the button on the remote to reset all transponder settings to their default settings Press the ma button on the remote to finish editing and return to Satellit
12. APPLICATIONS PREFERENCES Press A or to select Picture Position and press to enter the submenu Press A or to select Picture Settings 2 and press to enter the submenu z Press A or to select Picture Mode anguage English Country Germany and press lt 4 or gt to select Dynamic mnene ena Standard Mild Movie Game or User Satellite Settings Auto tuning NOTE Game is not available for the TV ATV Manual Tuning input mode DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Picture Settings Picture Mode Standard Active Backlight Control High Back Light Contrast Brightness Colour Back amp Press A or to select an option you Tint Sharpness want to adjust and press lt or gt to elna is adjust the settings as required Cinema Mode On Colour Temperature Medium Static Gamma 0 Reset Ea Picture Position Horizontal position Vertical position Reset Back RETURN Back Picture Preferences You can customise current picture mode settings while selecting User o In the Picture Settings menu press A or to select Back Light Contrast Brightness Colour Tint Sharpness 2 Press lt or gt to suit your preference 38 Black White Level This function increases the strength of dark areas of the picture which improves picture definition In the Picture Settings menu press A or Y to select Black White Level Press lt or
13. Boost and press lt or gt to change the setting Audio Level Offset Sometimes there can be large changes in volume when switching from a DTV 5 1ch to a DTV 2ch an ATV channel or an external input Using the Audio Level Offset feature reduces these volume differences o Press MENU Press lt or P to select SOUND and press to enter the submenu 2 Press A or to select Audio Level Offset and press to enter the submenu 3 Press A or to select an option and press lt or gt to adjust the volume level Audio Level Offset 4 External Input EEN Back NOTE e The available item changes depending on the current input source For example while watching a DTV 2ch programme only DTV 2ch is available and the other two items are grayed out in the menu This allows you to easily adjust according to each condition e When watching a DTV 5 1ch programme this feature is not available Digital Audio Output o Press MENU Press lt or gt to select SOUND and press to enter the submenu 2 Press A or to select Digital Audio Output and press to enter the submenu 3 Press A or to select Audio Format and press lt or gt to select PCM or Auto Digital Audio Output Audio Format 4 Audio Delay Audio Delay Time ms ES Edit Back o Press A or to select Audio Delay and press lt or gt to select Auto or Manual 5 Press A or to select Audio Delay Time ms and
14. Use an empty USB storage device for data transferring or the files stored on the device NOTE Files on the USB storage device will be erased when exporting the i channel list will be erased e To edit the channel list transponder table B Press to export download the tool from the Toshiba website The transferred file must be stored in the Channel list root of the USB storage device Do not change the name of the transferred Please Walt file or it might not be able to be imported back to the TV RETURN Back Exporting from TV to USB P RETURN 3 o In the DTV Settings menu press A or 1659 dais V to select Data Transfer and press Channel List to enter the submenu OK DTV Settings Channels Subtitle and Audio Password Parental Local Time Setting Back PEE E ET Eai Importing from USB to TV Channel Channel Grouping On List eee Repeat step 1 3 as Exporting from TV to USB EK Enter RETURN Back 2 Press lt or gt to select USB to TV Press A or to select Channel List or Transponder Table and press Channel list Please Insert USB Memory Data Transfer Transponder Table Edit Enter EE Back ED Press to import NOTE Channel list e Channel List and Transponder Table are both for Satellite Transponder Table is always transferred with the default scanned Please Wait information Back 3 Insert a USB storage device to the TV Remove the USB sto
15. cseeeeeees 57 USB HDD Capacity siiani 57 Select DEV CE ipsins 58 One Touch Recording Time 0c 58 Padding TME isccs ciecesivessncdsiccece tesvensscveseesees 58 Deviga TOSt wsiicsceisccissceessinsecieizetsstseesereseeteces 58 Format DeVICC se iesisccsscencsissteevsedenenreevennesees 58 Scheduling Priority sessirnir 59 Preference Controls ccsssssseeee 60 ON TAMER serenan eO 60 Sleep TIM lv ssivesstdcesaies eeervesacenestia sess 60 EP Guerin e 61 Panel Lock aicnthivariaseicannas 62 Auto Format Widescreen 62 A3 SUCICH e ena a GEES 62 Blue SCreenisawicsavrtinncietaveaenes 62 Sid Panel aiawiwasiiesnianutienanaen 62 DivX Registration eee eee eeeeeeeeeees 62 DivX Deregistration cscccssesseseceesees 63 System Information s 63 Software Upgrade ceccssescesseseeseeeees 63 Text Services and Text Information 64 Setting the Modes cceeeecesesseeeeeeseeeees Navigating Pages using Auto Navigating Pages using LIST eee Control BUNONS ananasas PC Setting ssisssssisrissssssrivosssnsursussssssissns Horizontal and Vertical Position 0 Horizontal Width siansa Clock PRASE ossai Srpna Ee T een ines Input Signal Selection csceeeee Input Signal Selection sisirin Frequently Asked Questions Specifications and Accessories 69 License Information ccccccceeeeeeeeee 70 Safety Precautions This equipment has been
16. designed and manufactured to meet international safety standards but like any electrical equipment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may occur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatures or humidity Place in a location where the temperature remains between 5 C 41 F min and 35 C 94 F max Mains Supply The mains supply required for this equipment is 220 240v AC 50Hz Never connect to a DC supply or any other power source DO ensure that the television is not standing on the mains lead Use only the supplied lead DO NOT cut off the mains plug from this equipment this incorporates a special Radio Interference Filter the removal of which will impair its performance In the UK the fuse fitted in this plug is approved by ASTA or BSI to BS1362 It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted IF INDOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN
17. device and press Press P Aor P Y to page up or down on the remote Use A or to select MEDIA and press Press A V lt or gt to select the desired photo and press x to view D Press lt or gt to select Photo and press to enter the submenu 41 Press MENU to change the settings Set Interval Time when viewing a photo Press MENU to change the settings when viewing a photo Press lt or gt to select kel and press to select the desired interval time 3 5 10 15 30 60 90 Sec Using the Play List Press MENU to change the settings when viewing a photo Press lt or gt to select El and press Press A or to select a photo and press x to show the photo Press RETURN on the remote to collapse the list Press lt or gt to El Go to the previous photo e Ed Go to the next photo E Select slide show mode B Select repeat mode Select the desired interval time B Clockwise rotation 90 E Counterclockwise rotation 90 E show play list El Set the background music E Photo information and press x to confirm the setting Using Slide Show This view allows you to watch a slide show of Backg round Music the photos In this view mode the only content Set the background music when viewing photo that locates on the same directory shall be ia Press MENU to change the settings played when viewing a photo Press MENU to change the settings Gp wh
18. obtain a clear picture Reset This feature resets all PC settings to the factory 65 settings NOTE If any PC settings have not been changed Reset is not available 1 In the PC Setting menu press A or Y to select Reset 2 Press W NOTE e When a PC is connected using HDMI none of these functions will be available The screen is disrupted momentarily when adjusting PC setting This is not a sign of malfunction The default settings and adjustment ranges may vary depending on the input signal format Input Signal Selection Use the Input Selection feature if the television does not switch over automatically when using an external device Input Signal Selection You can select source of AV or S VIDEO from this function Press MENU Press _ lt or gt to select SETUP and press to enter the submenu PICTURE SOUND SETUP APPLICATIONS PREFERENCES 2 Press A or_ to select AV connection and press 8 to enter the submenu amp Press A or to select EXT1 input and press lt or gt to select AV or S VIDEO AV connection EXT1 input 4 Back 66 gt Oreo Frequently Asked Questions Why is there no sound or picture Q A Check that the television is on and that all connections are made properly There is a picture but why is there little or no colour The colour is factory set to Auto to automatically display the best colour system When using
19. pending on the current mode 33 does not switch over automatically when using an external device Pressing a list will appear on screen showing all external equipment Use A or to highlight and to select HDMI displays equipment connected to Input HDMI on the back of the television It is designed for best performance with 1080i 1080p high definition signals Sound Controls Volume Controls and Mute Sound Volume Press aora or to adjust the volume Sound Mute Press XK on the remote once to turn the sound off and again to cancel Dual If a programme or film is being broadcast with a soundtrack in more than one language the DUAL feature allows selection between them Press MENU Press lt or gt to select SOUND and press x to enter the submenu Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial 1 Press MENU Press lt or gt to select SOUND and press 6x to enter the submenu o Press A or to select Stable Sound and press lt or gt to select On or Off Dynamic Range Control This feature allows control of audio compression for some digital TV programmes MPEG 1 and MPEG 2 audio programmes are 6 SETUP PICTURE APPLICATIONS PREFERENCES SOUND Press A or to select Dual and p
20. press lt or gt to change the setting NOTE Audio Delay Time ms is only available when Audio Delay is Manual Audio Description Audio Description is an additional narration describing on screen action body language expressions and movements for people with visual disabilities while watching the TV This function enables you to choose the type of narrations 1 Press MENU Press lt or gt to select SOUND and press 6x to enter the submenu 2 Press A or Y to select Audio Description and press to enter the submenu amp Press A or to select Audio Description and press lt or gt to select On or Off Audio Description Audio Description 4 Mixing Level EEN Back o Press A or to select Mixing Level and press lt or gt to change the setting NOTE Mixing Level can only be ad justed when Audio Description is On NOTE Press the AD button on the remote con 35 trol to switch the Audio Description On or Off Engish Widescreen Viewing Depending on the type of broadcast being transmitted programmes can be viewed in a number of formats Use this setting when watching a widescreen DVD widescreen video tape P or a 16 9 broadcast when available Due Wide Except PC to the range of widescreen formats 16 9 14 9 20 9 etc black bars may be visible on the top and bottom of the screen This setting will show the picture without Ay over scan and side panel when Wi
21. recorded data or malfunction of the USB HDD e Please note that recording on the USB HDD is no longer playable after the TV s main board is exchanged during service 55 To ensure protection of your personal data Toshiba recommends that you reset all TV settings when you recycle your TV or transfer to others To reset your TV please access via menu settings selecting Reset TV See owner s manual page 26 for further details e In order to use this function a USB HDD needs to be connected to the TV Do not use USB Hub e After recording operation time may take to a recording start Recorded programmes saved on the USB HDD can only be viewed on this TV They cannot be viewed when connected to another TV including the same model of TV a PC or other device e You cannot watch other channel while recording another If the recording time to the USB HDD is too short no data may be saved e You cannot record video input signals on the USB HDD e Not all types of broadcast may be recordable After programming the TV to record digital broadcasting do not disconnect the power plug before recording starts Doing so may cause scheduled recordings e Should video or audio recording fail due to malfunction of the TV or poor reception no compensation shall be paid e If there is a power failure or the power plug is disconnected during programmed recording recording will stop and will not resume when the powe
22. to exit You must register your device to play DivX protected videos Registration code XXXXXXXXXX Register at http vod divx com 63 System Information In the SETUP menu press A or Y to select System Information and press to display the model information and firmware version System Information TOSHIBA 2013 Nov 9 2012 17 48 06 FW v0 08 SR Back Software Upgrade Press MENU Press lt or gt to select SETUP and press to enter the submenu PICTURE SOUND APPLICATIONS PREFERENCES SETUP Press A or to select Software Upgrade and press 8 to enter the submenu Press A or to select Auto Upgrade and press lt or gt to select On or Off Software Upgrade Auto Upgrade Auto Install Manual OAD USB Detection USB Upgrade Edit Insert a USB storage device Press A or_ to select USB Upgrade and press to start upgrading the firmware RETURN Back USB Upgrade NOTE Firmware upgrading is suggested to be done by the professional service personnel Text Services and Text Information This television has a multi page text memory which takes a few moments to load Seiting the Modes 1 In the PREFERENCES menu press A or V to select Teletext PREFERENCES Recording Setup HDMI CEC Control Teletext Panel Lock Auto Format 4 3 Stretch Blue Screen Side Panel DivX Registration DivX Der
23. 00 00 02 00 0242 C a 16 00001 0003 CEOS E a ee a oot Mes Play List Page E Move _ bx Select Back Music Info Info display file status information content number music title Bit Rate Artist Sampling Year and size 1 Press lt or gt to select K and press 6 001 MP3 Album Tiie Bit Rate Arist Sampling 6366 KBytes A ozo ST 1s 9001 0008 lt 0 gt 001 MP3 ik Back The information will be removed by time out about 15 sec or press 8 to exit Enjoy Videos through USB Port The Video Viewer allows you to playback video files from a USB storage device NOTE USB 2 0 or above is recommended for best media performance File Extension Container Video Codec SPEC Bit Rate Mbit sec Profile dat mpg mpeg MPEG MPEG1 MPEG2 1080P 30fps 40 MPEGz2 Main Profile High Level ts trp tp MPEG2 TS H 264 TS H 264 MPEG2 H 264 1080P 50fps Others 1080P 30fps H 264 Main Profile and High Profile Level 4 1 MPEGz2 Main Profile High Level MPEG2 PS MPEG2 1080P 30fps MPEGz2 Main Profile High Level H 264 1080P 50fps Others 1080P 30fps H 264 Main Profile and High Profile Level 4 1 MPEG4 Simple Profile and Advanced Simple Profile Level 5 H 264 MPEG1 MPEG2 MPEG4 H 264 1080P 50fps Others 1080P 30fps H 264 Main Profile and High Profile Level 4 1 MPEGz2 Main Profile High Level M
24. 5 MUSIC INFO aeaaaee 45 Enjoy Videos through USB Pott 46 Play Video PileSi lt ii cccsserissecssececescvestcderzesees 47 Repeat Settings cceeeeeeeeeseereeeeeeeees 48 Set E 48 Wsing the Play LiSt sis ccccsatdersceccnenpcibsressenasecs 48 Slow Forward vsscicsccecnssisvvatendiesisiveaes 48 Step Forward 48 Video Info Aspect Ratio Picture Mode Goto TiMe 0 eee eee eeeeeeeeeceeeeeeeeeeeeeteeeeeeees 48 HDMI CEC Control esccseceseeeeteeeee 49 Equipment Control eiti rseriiiig anika 49 Select HDMI CEC Device eee 49 HDMI CEC Menus 2 ccseccseeeeeeeeeee 50 One Touch Play enerne nn araa 50 System Standby rsss 50 System Audio Control 0 ccceceeeeeeees 50 Enable HDMI LINK eeeeeeeeeetteeeeeees 50 Aut Power OMe at 51 Auto Standby seeeeeeeeereeereererne 51 Amplifier Contolera 51 Speaker Preference ccccceeceeteeeeee 51 HDMI CEC Playback Device Control 52 Using MHL TV Function 2 c 53 Connecting an MHL compatible Device 53 MHL Control sveviciccsccaccssctcevscvscccasccssinsieacsses 53 Operating an MHL compatible Device 54 USB HDD Record Function 55 Connecting the USB HDD for recording 56 Recording DTV Programmes 56 View a Record Programme 57 Protect a Record Programme 008 57 Delete a Record Programme sessssserss 57 Sort Record Programmes
25. Fraunhofer IIS and Thomson THIS PRODUCT IS LICENSED UNDER THE MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR i ENCODING VIDEO IN COMPLIANCE WITH THE MPEG 4 VISUAL STANDARD MPEG 4 VIDEO AND OR ii DECODING MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSE BY MPEG LA TO PROVIDE MPEG 4 VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED INA PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LLA L L C SEE HTTP WWW MPEGLA COM DIVX HD Sdts DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 ABOUT DIV
26. I Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI Digital Visual Interface source device This input is designed to accept HDCP High Bandwidth Digital Content Protection programme material in digital form from EIA CEA 861 D compliant 1 consumer electronic devices such as a set top box or DVD player with HDMI or DVI output For acceptable video signal formats see page 14 NOTE e Some early HDMI equipment may not work properly with your latest HDMI TV due to the adoption of a new standard e Supported Audio format Linear PCM and Dolby Digital sampling rate 32 44 1 48kHz To connect an HDMI device Connect an HDMI cable type A connector from the device to the HDMI terminal For proper operation it is recommended that you use an HDMI cable with the HDMI Logo HDMP e If your HDMI connection is capable of 1080p and or your television is capable of refresh rates greater than 50Hz you will need a Category 2 cable Conventional HDMI DVI cable may not work properly with this mode e HDMI cable transfers both video and audio Separate analogue audio cables are not required see illustration ILLUSTRATION SHOWS 32L244 UNDUE NATTA Un Ln T Ree es r Y 1 1 1 1 1 1 lt HDMI cable not supplied To view the HDMI device vide
27. ONS On timer Sleep Timer Demo K Enter RETN Back Press A or Y to select Enable On Timer and press lt or gt to select On or Off On timer Enable On Timer Enable DTV Clock Channel Volume Time Until Power On Back NOTE Following settings are only avail able when Enable On Timer is On Press A or to select Enable DTV Clock and press lt or gt to select On or Off NOTE Power On Time and Repeat are only available when Enable DTV Clock is On Press A or Y to select Power On Time and press lt or gt or use the number key pad on the remote to enter the time 6 Press A or to select Repeat and press lt or gt to select ONCE DAILY Mon Fri Mon Sat or Sat Sun Press A or to select Input and press lt or P gt to select ATV EXT 1 EXT 2 EXT 3 HDMI 1 HDMI 2 PC or DTV Press A or to select Channel and press lt or gt to change the channel number or use the number key pad on the remote to enter the channel number NOTE e Channel is only available when the Input is ATV or DTV e Blank screen will appear if not tuned 9 Press A or to select Volume and press lt or gt to modify the volume or use the number key pad on the remote to enter the volume 10 Press A or to select Time Until Power On and press lt or gt or use the number key pad on the remote to enter the time for the TV to turn on automatically NOTE Time Until Power On is only availa
28. PEG4 Simple Profile and Advanced Simple Profile Level 5 divx div AVI 1 0 2 0 DMFO 1 2 DivX 3 11 DivX 4 12 DivX 5 x DivX 6 1080P 30fps MPEG4 Simple Profile and Advanced Simple Profile Level 5 AVI 1 0 2 0 DMFO 1 2 H 264 MPEG1 MPEG2 MPEG4 DivX 3 11 DivX 4 12 DivX 5 x DivX 6 H 264 1080P 50fps Others 1080P 30fps H 264 Main Profile and High Profile Level 4 1 MPEGz2 Main Profile High Profile MPEG4 Simple Profile and Advanced Simple Profile Level 5 AVI 1 0 2 0 flash formats MJPG Motion JPEG H 264 Sorenson H 263 640x480 30fps H 264 1080P 50fps Others 1080P 30fps 46 H 264 Main Profile and High Profile Level 4 1 MP4 GMC is not supported Some files may not be played Play Video Files eB Press MENU to change the settings 1 Insert a USB storage device and press when viewing a video on the remote Use A or to select MEDIA and press W Se lt u E SEE ERa Pause Ei Move Select ERT Back Press lt or gt to DO Play or pause the selected video 2 Press lt or gt to select Movie and press Kl Fast back the selected video to enter the submenu O Fast forward the selected video Boso El Go to the previous video e El Go to the next video O Stop play E Select the desired repeat interval Repeat Off Repeat One Repeat the selected video once Repeat Folder
29. Press lt or gt to select SETUP and press 6x to enter the submenu Press A or to select DTV Manual Tuning and press to enter the submenu Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Settings AV connection English Germany Satellite Picture Position Quick Setup Enter Back Press A or to select Satellite Transponder Frequency Symbol Rate Polarisation Search Option or Start Scan and press lt or gt to change the setting DTV Manual Tuning Satellite Weak Signal Strength i Quality Average ASTRA 19 2 E 1 122 10714 MHz 22000 KS s H Free to Air ta Transponder Frequency Symbol Rate Polarisation Search Option Start Scan EEN EI LNB Settings Back Press A or Y to select Start Scan and press to start tuning Engish Satellite Settings Add a satellite From the Satellite Settings menu you can In the Satellite Settings menu press add the satellites that you wish to tune and A or Y to select a new line to add an configure detailed settings individually another satellite and press 6 Edit satellite settings Satellite Settings o Press MENU Press lt or gt to select SETUP and press to enter the i j submenu Satellite Press A or to select Satellite Settings and press to enter the submenu ASTRA 19 2 E Transponder N A Lower LOF N A Upper LOF N A Language English Country Ger
30. Repeat all video files in the selected folder Repeat from A to B Set A A Set Repeat and Start Set B B Set Repeat and repeat from AtoB E show play list g Video information L l e ee l i E amp Siow forward the selected video Press A or Y to select the desired video E Step forward the selected video and press to play E Aspect Ratio E Picture Mode Allows you to input a search time Press A or Y to select the folder you wish to view and press x to enter Press P Aor P Y to page up or down and press to confirm the setting 47 Repeat Settings Press MENU to change the settings when viewing a video Press lt or to select id and press to select Off One or Folder Set Press MENU to change the settings when viewing a video Press lt or gt to select Md and press to select Set A Set B or None Using the Play List Press MENU to change the settings when viewing a video Press lt or gt to select El and press Press A or Y to select a video and press W to play the video Press RETURN on the remote to collapse the list 00228 KO M or 6 Ply Page EMove Select EN Back Slow Forward The feature changes forward speeds o Press MENU to change the settings when viewing a video E Press lt or gt to select EJ and press to select SF2X SF4X SF8X SF16X or Play Step Forward The feature allows you to view a video one frame
31. TOSHIBA Leading Innovation gt gt gt Owner s Manual L244 W244 DIGITAL Series This standard owner s manual is designed to show you how to connect and tune in your Toshiba TV and to operate the most commonly used functions During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance If your TV is connected to the internet firmware will be automatically made available If your TV is not connected to the internet you can download the latest version of firmware from www toshiba om net firmware php If you want to view advanced functions for your TV you can do so by visiting www toshiba om net Toshiba estimates that the initiative of making the advanced functions available online will save over 100 000 trees per year 6 5 Million Kg CO If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your local owner s manual Helpline number Contact details are shown at the back of this book Contents Safety Precautions ccsscceseeeeees 4 Common Interface ccccceseeeceseteeeteeees 29 gt Data Transtet srna 30 Installation and Important seed INTORIMATION oi sei ccesecncecestsecsatesezedesceteezeccees 5 Digital On Screen Information and Programme Guide cccesseeeseseees 32 Where to install ssiecccietisscssciceuseeneenesceressiaenes 5 When using a Wall Bra
32. X VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration MHL the MHL logo and Mobile High Definition Link are trademarks or registered trademarks of MHL licensing LLC For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS 2 0 Digital Out is a trademark of DTS Inc DTS Inc All Rights Reserved 2 0 Digital Out Blu ray Disc Blu ray are trademarks of the Blu ray Disc Association REACH information The European Union EU chemical regulation REACH Registration Evaluation Authorization and Restriction of Chemicals entered into force on 1 June 2007 with phased deadlines to 2018 Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH re
33. an external source if there is little or no colour improvements may sometimes be achieved To manually change the colour system gt gt With the external source playing select Manual setting in the SETUP menu Using A or to choose from Auto NTSC 4 43 NTSC 3 58 SECAM or PAL Manual setting Colour system Auto Save Back El Select E Change Why doesn t the video DVD being played show on screen Make sure the Media player or DVD player is connected to the television then select the correct input by pressing gt OFO OQ Why is there a good picture but no sound Check all cable connections and that the volume has not been turned down or that the sound has not been muted gt 67 What else can cause a poor picture Interference or a weak signal Try a different television station Manual fine tuning may help Select the ATV Manual Tuning in the SETUP menu Highlight the station and press 6 then press lt or gt to select Manual fine tuning ATV Manual Tuning me ok Ta fofcfesfay o LE E Select Save Back Using A or to adjust to get the best picture and sound Press and then RETURN Why doesn t the remote control work E Change Check that the batteries aren t exhausted or inserted incorrectly Why are there problems with text Good performance of text depends on a strong broadcast signal If the text is unreadable or garbled
34. at a time 1 Press MENU to change the settings when viewing a video 2 Press lt or gt to select El and press x to play step by step Video Info Info display file status information content number video title audio track subtitle program size etc o Press MENU to change the settings when viewing a video 2 Press lt or gt to select E and press 6 CER Back amp The information will be removed by time out about 15 sec or press to exit Aspect Ratio 1 Press MENU to change the settings when viewing a video Press lt or gt to select El and press 6 to select Native 4 3 or 16 9 Picture Mode o Press MENU to change the settings when viewing a video Press lt or gt to select K and press to select Standard Mild Movie or Dynamic Goto Time The feature allows you to view a selected time during the video o Press MENU to change the settings when viewing a video 2 Press lt or gt to select and press ED Use the number key pad on the remote to enter time Press to go to the input time Standard Input search time 48 HDMI CEC Control This feature uses CEC Consumer Electronics Control technology and allows the control of Toshiba HDMI CEC compatible equipment from the television s remote control NOTE Not all Toshiba products currently support HDMI CEC Equipment Conirol The HDMI CEC mode on the television s remote control allows the
35. ble Do you wish to proceed with Satellite tuning Location Back lf Antenna is selected in Tuner Mode the following displays Tuner Mode B DTV may not be fully supported for the selected country As a result some programmes could be unavailable Do you wish to proceed with Terrestrial tuning Location Back If Cable is selected in Tuner Mode the following displays except in Germany Tuner Mode B Digital cable may not be fully supported for the selected country As a result some programmes could be unavailable Do you wish to proceed with Cable tuning Location Back NOTE Cable option is not supported in Greece Italy Luxembourg Portugal Spain and the UK Select Yes to go to step 7 select No to re select Tuner Mode Press to select Location Press lt or gt to select Home or Store For normal home use select Home Location To use the TV for the display in a store showroom please select Store Home mode is recommended for normal use Select Auto tuning Back When Store is selected the confirmation window appears Location B You have selected Store This mode consumes more energy Are you sure you want to set to this mode Back Select Auto tuning Press lt or gt to select YES or NO e In Antenna Cable mode go to step 8 e In Satellite mode press to enter Satellite Settings menu step 10 e In Antenna Cable Satellite mode go to step 8 a
36. ble when Enable DTV Clock is Off Sleep Timer The television can be set to turn itself Off after a certain length of time 1 Press MENU and press lt or gt to select APPLICATIONS 2 Press A or to select Sleep Timer Turn off the TV amp Press lt or gt to modify the time the TV should turn off or use the number key pad on the remote to enter the time 60 EPG EPG Electronic Programme Guide supports 9 sets of timers You can set or cancel a timer for a selected programme within the guide When the TV is on and the timer activates a dialogue box is shown informing you that the programme is about to start When the TV is in standby mode and the timer activates the TV will wake up with backlight off soeaker mute on and change to the channel selected You must set the time correctly before using this function All set timers are cleared when performing a new channel scan o Press GUIDE on the remote to display the Programme Guide 4 Rossia K m 08 54 17 Fri Deejay Chiama Italia Deejay Hits The Club Deejay Tg Deejay News Beat Deejay News Beat Deejay News Beat Rossia 2 TRK 5 Kanal Bibigon Service Information Service Information SITS 22 30 23 00 23 00 23 30 23 30 00 00 E More info Timer List 5K Tune Press ATV DTV to select All DTV RADIO or Favorite Press A or to select the desired channel and press to enter the programme schedule Press A or to sele
37. cececececcececeeeees 38 AUTO TUNING soeone thine atest lees 20 Picture Mode sesesseseessrnreresesesennesnsesseerees 38 Manual TUNNA sasiaren 22 Picture Preferences wie iicccescsscceeevatsixecerensses 38 Satellite Settings aerarii 24 Black White Level isisiesnisnisssscsninsnsini 39 Automatic Power DOWN cccccscceeseeeeeees 26 Cinema M d sisis irsta 39 FRESGE TV eae ee epa 26 Colour Temperature sssrinin 39 DTV Settling ss ccstcscssscssscsecscastinstesssscnee 27 Statio GaMMa senator RESO lenen E 39 Channels vie Bo ee nt ee 2l Active Backlight Control 0 c eeeees 39 Subtitle and Adisis 28 3D Colour Management cccccsccsocessseseeeee 40 FAS OND meniren as a Base Colour Adjustment eeeereeees 40 eae sank ease aires aestan 26 Digital Noise Reduction eeeeeeee 40 cara de Shak Naa 29 MPEG NR Noise Reduction 40 Standby Channel Update eee 29 Channel Grouping riri iiinn 29 Enjoy Photos through USB Port 41 View Photo Files ceeceeeeeeeeeeeeteeeeeeee 41 Using Slide ShOW ernen 42 Repeat Settings for Slideshow 42 Set Interval Time weisccascsisssevseeascessssssssdesceved 42 Using the Play List sscssscssseeseesees 42 Background MUSIC sisccsssssrisscciscnsesecssicasves 42 PNOO WMO acti cece ac res Eas 43 Enjoy Music through USB Pott 44 Play Music Files i 44 Repeat Settings wi 45 Using the Play List n 4
38. check the aerial satellite or cable connection Go to the main index page of the text service and look for the User Guide This will explain the basic operation of text in some detail Why are the four coloured text numbers visible but no text Analogue Only Text has been selected while viewing an external source No text will appear on screen or a box may appear stating no information is available Select a broadcasting channel and press E to access A Foro gt GO gt G Why are the colours wrong when an NTSC source is played Connect the NTSC source via a SCART cable and play Select Manual setting from the SETUP menu and set the Colour System to Auto Manual setting Colour system Auto El Select El Change Save Back What can be done if the user defined password has been forgotten Use the universal password 1276 then change to a new number of your choice Why don t the devices connected via HDMI operate properly Make sure to use cables with the HDMI logo HIM Some early HDMI equipment may not work properly with the latest HDMI TV products due to adoption of new standards Why is the Media Player DVD picture in black and white Check the correct input has been chosen S VIDEO or AV Why did TV turn off by itself After roughly 15 minutes without any input video signal at TV mode the TV will turn off to reduce power 68 Specifications and Accessories e This television complies
39. cket cccccccccccceseeeeee 5 Information sses EITT TITTELI ITIITI TITT 32 When using MHL Mobile High definition On Screen Information Icons c 32 DSi E TN IEE A eat eet 6 The Remote Control ccccescsseeeeees 7 Inserting batteries and effective range of the remote wicca heanin 7 Connecting External Equipment 8 HDMI CEC Connections cceeeeee 10 Connecting an HDMI or DVI Device to the HDMI Input eeeeeeeeeeeeeeeeeees 11 To connect an HDMI device cc ee 11 To connect a DVI device oo ees 12 Connecting a Computel ssssee 13 Bass Treble and Balance 34 Stable SOUNG sisine 34 Acceptable Video signals through HDMI terminals 14 Dynamic Range Control 34 Acceptable PC signals through HDMI Voice EMRE INT atest reser cesta ali terminals ge e A A 14 ECEN oro a 35 r Audio Level Offset c ceeceeeeeeeeeeees 35 Using the Controls ccsseeeeeees 15 Biigital Audio N T 35 Switching ON ee eeeeeeceteeneeeeeteeereeneeeeeeaee 15 Audio DOSCIIPTHON s cccsecsetiecsececcersseeeerscnees 35 Using the Remote Control ssseeees 15 Widescreen Viewing 36 i Menn aes 1 Using ne Sonto a mem 3 Available Picture Size and Position Tuning the Television ceeeee 16 COMNTIO DO 37 First Time Using Picture COntrols csccssesseeeseeesees 38 Setting the Channels ccseeeee 20 Picture POSIION coccccccccccccccececece
40. cle anng 1 Press MENU Press lt or gt to select DTV Settings AV connection SETUP and press 6 to enter the Picture Position submen u Quick Setup amp Press A or to select Auto tuning and press x to enter the submenu Enter Back amp Press A or to select Tuning Mode and press lt or gt to select ATV DTV or ited ao ATV and DTV Tuner Mode Cable Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Auto tuning B Previous settings will be lost Press EXIT for no change Tuning Mode Start Scan EEN Back Enter Back 20 Press A or to select Tuning Mode and press lt or gt to select ATV DTV or ATV and DTV Auto tuning B Previous settings will be lost Press EXIT for no change Start Scan Operator Selection Scan Type Start Frequency MHz End Frequency Modulation Symbol Rate Network ID System Quick Scan Back Press A or V to select Operator Selection and press lt or gt to select Others Ziggo or UPC NOTE Operator Selection can only be adjusted when Country is Netherlands Press A or to select Scan Type and press lt or gt to select Full Scan or Quick Scan NOTE Channels with a weak signal may be missed by Quick Scan Press A or to select Operator Selection Scan Type Start Frequency MHz End Frequency Modulation Symbol Rate Network ID or Syste
41. control of connected HDMI CEC equipment being watched To control the HDMI CEC input source first select the equipment with HDMI CEC input source selection then switch the mode on the remote control to HDMI CEC and press any buttons The available functions are dependent on the equipment connected Not all the remote control keys may be available Please refer to the operation manual for each piece of equipment connected 49 Select HDMI CEC Device Press A list appears on screen showing modes and all stored external equipment The HDMI LINK icon appears automatically after detected with HDMI CEC compatible equipment Press A or Y to highlight the input source shown with the HDMI LINK icon HDMI LINK Press gt and the device selection menu appears showing all connected HDMI CEC equipment Press A or to highlight the desired HDMI CEC equipment and then press to select HDMI1 Disc Player HDMI LINK HDMI CEC Menus By activating the Enable HDMI LINK feature in the HDMI CEC Control menu individual HDMI LINK features can then be activated Enable HDMI LINK When the Enable HDMI LINK is set to On it allows the other functions to be enabled One Touch Play The function of HDMI CEC will automatically power on the television that was in standby mode and switch the television s input source to the port connected with the audio video equipment by powering on or playing from the audio vi
42. ct the desired programme and press to enter the Tune menu Back Programme Guide Favorite 27 Aug 4 Rossia K Unclassified 08 54 17 Fri 27 Aug Programme Timers 4 Rossia K o9 Deejay Chiama Itali RH 20 00 21 00 17 Oct 2005 0K Save Press A or to select Repeat or Subtitle and press lt or gt to adjust the settings as required Press to save the settings Back 61 Press the ma button on the remote to enter the Timer List menu 07 42 58 Fri 27 Aug Programme Timers Channel D LIVE Bask etball NBA Fri 27 Aug AFL Premiership Season 2011 Fri 27 Aug C Delete Back Press A or to select the desired programme and press v to edit NOTE Press the mam button on the remote to delete the timer 07 42 58 Fri 27 Aug 1 ONE HD 2010 08 27 Start Time End Time Repeat Subtitle 08 05 08 27 08 35 08 27 ONCE Press A or to select Channel Date Start Time End Time Repeat or Subtitle and press lt or gt to adjust the settings as required Press to save the settings NOTE After adjustment the TV clock may not match the time in the EPG Programme Guide The EPG Programme Guide time follows the broadcast stream time which can not be adjusted Engish Panel Lock Panel Lock disables the buttons on the television All buttons on the remote control can still be used Press MENU Press lt or gt to select PREFERENCES and press 6x
43. de PC only watching a PC signal source via HDMI or PC terminal This setting will enlarge a 4 3 image to fit the screen by stretching the image Super Live horizontally and vertically holding bette proportions at the centre of the image Some distortion may occur Cinema reduce the black bars at the top and botton displayed Subtitle 4 3 Use this setting to view a true 4 39 broadcast of the screen by zooming in and selecting 14 9 Use this setting when watching a14 9 ke broadcast When watching letterbox format films the image without distortion The setting will show the picture without over scan i e WYSIWYG This option Native is available when watching video signal E source via HDMI or watching DTV video tapes this setting will eliminate or When subtitles are included on a letterbox Subtitle format broadcast this setting will raise the picture to ensure that all the text is HD signal 36 This setting will show the picture without over scan i e WYSIWYG Normal This option is only available when watching a PC signal source via HDMI or PC terminal Dot by Dot is a non scaling display Depending on the input signal format Da Dot by Dot the setting will display the picture with side panels and or bars at the top and bottom i e VGA input source Press QUICK to display the Quick access menu Use A or Y to select th
44. deo equipment NOTE This feature is dependent on the connected equipment and television setting System Standby This feature automatically switches the connected equipment into standby when the television goes into standby and conversely for the television to switch into standby when connected equipment goes into standby It is selected in the HDMI CEC Control menu NOTE This feature is dependent on the connected equipment and television setting System Audio Control Using the Speaker Preference feature allows the television s remote control to adjust the volume or mute the sound of the speakers connected to the television via an AV amplifier Ensure that the connected AV amplifier and HDMI CEC equipment are selected in the input source selection and that the Speaker Preference is set to Amplifier in the HDMI CEC Control menu NOTE When the AV Amplifier is switched on submenu Press MENU Press lt or gt to select PREFERENCES and press to enter the PICTURE SOUND APPLICATIONS PREFERENCES ci SETUP submenu Recording Setup HDMI CEC Control Teletext Panel Lock Auto Format 4 3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistration Enter On or Off Enable HDMI LINK Auto Power On Auto Standby Amplifier Control Speaker Preference Press A or V to select HDMI CEC Control and press x to enter the PREFERENCES Back Press A or
45. e Settings menu Transponder Settings Frequency Polarisation Symbol Rate S S2 11683 V R 02734 5 1Delete Cancel Reset Done Edit 25 Engish Select LNB settings In the Satellite Settings menu press A or Y to select the satellite you want to edit and press Press lt or gt to select LNB Satellite Settings Switch Type LNB Power Satellite ASTRA 19 2 E Transponder 1 122 10714 MHz Lower LOF 9750 Upper LOF 10600 fe Change Press the mai button on the remote to enter LNB Settings menu Save PI LNB Settings LNB Settings LNB 1 Lower LOF 4 Upper LOF 09750 10600 Input Enter Back Press A or to select Lower LOF or Upper LOF and use number key pad on the remote to define the frequencies 26 Automatic Power Down The TV will automatically turn itself off standby within 4 hours if you do not touch the control buttons on the remote control or on the TV control panel It will also automatically turn off if no input signal is detected after approximately 15 minutes In the SETUP menu press A or Y to select Automatic Power Down Press lt or gt to select Off 4h 6h or 8h Automatic Power Down Location Library Software Upgrade System Information Reset TV Back Reset TV Selecting Reset TV will reset all TV settings to their original factory values In the SETUP menu press A or V to select Reset TV and p
46. e Panel The Side Panel feature lightens or darkens the band each side of the screen when in 4 3 or 14 9 format This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable 1 In the PREFERENCES menu press A or Y to select Side Panel o Press lt or gt to adjust the settings as required DivX Registration View the registration code that is required to play video files that are compatible with the DivX VOD Video On Demand service on the TV DivX VOD is a video delivery service that lets you rent or purchase video content recorded in DivX format To play video files that are compatible with the DivX VOD service the TV needs to be registered as a DivX player In the PREFERENCES menu press A or Y to select DivX Registration and press You must register your device to play DivX protected videos Registration code XXXXXXXXXX Register at http vod divx com DivX Deregisiration In the PREFERENCES menu press A or Y to select DivX Deregistration and press 6x Press lt or gt to select OK to confirm or select Cancel to exit and press 6x Your device is already registered Are you sure you wish to deregister Cancel Press lt or gt to select OK to confirm or select Cancel to exit and press 6x Deregistration code XXXXXXXX Deregister at http vod divx com Continue with registration Cancel o Press
47. e Picture Size Quick access and press lt or gt to select the option PVR Control Picture Size Wide Picture Mode Standard Sleep Timer 00 00 Media Player System information HDMI CEC Control You can choose the picture size from Wide 4 3 Super Live Cinema Subtitle 14 9 Native Normal or Dot by Dot Using the special functions to change the size of the displayed image i e changing the height width ratio for the purposes of public display or commercial gain may infringe on copyright laws Available Picture Size and Position Control a Cinema Subtitle Native Normal ojojojojojojojoj jo o O O0 O0O 0 0 0 0 0 o O o0 O0 0 0 0 0 0 o jojojojojojoj jojojojo 37 Picture Controls Most of the picture controls and functions are available in both digital and analogue modes NOTE Features not available will be greyed out Picture Position Picture Mode The Picture Position may now be adjusted to You can adjust the picture appearance by suit personal preference selecting the preset value in picture mode Press MENU Press lt or gt to select based on the programme category SETUP and press to enter the o Press MENU Press lt or gt to select submenu PICTURE and press to enter the submenu a PICTURE SOUND SETUP APPLICATIONS PREFERENCES PICTURE SOUND SETUP
48. e content you want to protect Press the mm button on the remote A il icon appears Library All Sort Genre 15 A E Hole in the Wall 1e E Bondi Vet I Crafting with jem s Designs Extreme Makeover Home Edition EM Gilmore Giris Thu 27 10 11 03 11 06 Thu 27 40 11 01 11 03 Thu 27 40 11 5 Thu 27 40 11 06 11 09 Thu 27 40 11 09 11 12 E 19 Dave 27 40 2011 11 03 00 02 50 Remaining Capacity 87 3356 MB Protect Delete E sort E Piay Back Delete a Record Programme Press A or to select the content you want to delete Press the mai button on the remote Press lt or gt to select YES to confirm or select NO to exit and press Sort Record Programmes Press the mai button on the remote to change sort order in Play List Sort order Genre Title Time or Channel USB HDD Capacity You can check the remaining capacity of the USB HDD using Remaining Capacity NOTE The remaining capacity displayed is only a guide it is not guaranteed Select Device Press MENU Press lt or gt to select PREFERENCES and press 6x to enter the submenu a PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or to select Recording Setup and press to enter the submenu PREFERENCES Recording Setup HDMI CEC Control Teletext Panel Lock Auto Format 4 3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistratior A 2292 p Back Pre
49. ed text To discover the solutions on quiz and joke pages press the amp button Holds a wanted page At times it is convenient to hold a page of text Press amp and amp will appear in the top left of the screen The page will be held on screen until the button is pressed again Enlarges the text display size Press once to enlarge the top half of the page press again to enlarge the bottom half of the page Press again to revert to normal size amp Selects a page while viewing a normal picture Enter the page number then press OB a normal picture will be displayed The television will indicate when the page is present by displaying the page number at the top of the screen To display news flashes Select the news flash page for the chosen text service see the index page of your text service By pressing S news flashes will be displayed as and when they are broadcast Press again to cancel the display How to change the page Press A or V to change the page Press lt or gt to change the sub page when a sub page is available The news flash page must be cancelled before changing channels PC Settings Most of the picture controls and functions are available However features not available will be greyed out In the PC input mode the Manual Setting is not displayed First press until the video input mode list appears on the screen then press A or Y and in order to se
50. egistratior Back 2 Press lt or gt to select Auto or LIST Navigating Pages using Auto If Fastext is available four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote control For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Navigating Pages using LIST If Fastext is available four coloured titles with numbers 100 200 300 and 400 have been programmed into the television s memory To view these pages press the relevant coloured buttons To change these stored pages press the relevant coloured button and enter a new 3 digit number This number will change in the top left of the screen and in the coloured highlight Press to store The bars at the bottom of the screen will flash white Whenever is pressed all four page numbers showing at the bottom will be stored and the previous ones will be lost If 8 is not pressed the selection will be forgotten when text is cancelled Other pages may be viewed by entering the 3 digit page number but DO NOT press or these pages will be stored Control Buttons Below is a guide to the functions of the remote control text buttons Displays the index initial page Press to access the index initial page The page displayed is dependant on the broadcaster Reveals conceal
51. en viewing a photo 2 Press lt or gt to select Ed and press R 2 Press lt or gt to select I and press 6x to turn On or Off NOTE If Repeat is On slide show starts photo viewing from the first photo in the folder after reaching the final photo Repeat Settings for Slideshow 1 Press MENU to change the settings when viewing a photo 2 Press lt or gt to select id and press to turn On or Off 42 Press lt or gt to select El and press l Select E Back Press A or Y to select music and press to play music Press RETURN on the remote to collapse the list Page F Move a Select RETR Back o Press lt or gt to select Md and press to select One or Folder l Select ERT Back Info displays the file status information content Photo Info number photo title shooting date and time resolution etc 1 Press MENU to change the settings when viewing a photo 2 Press lt or gt to select O and press amp The information will be removed by time out about 15 sec or press to exit Enjoy Music through USB Port The MP3 Player allows you to playback music files from a USB storage device Audio Codec File Extension Bit Rate Bit Rate 8Kbps 320Kbps Sampling rate 16KHz 48KHz MPEG1 Layer2 3 MP3 Bit Rate Free Format AAC HEAAC M4A AAC Sampling rate 8KHz 48KHz Bit Rate 64Kbps 1 5Mbps LPCM WAV Sampling rate
52. enu press A or Y to select Speaker Preference when Amplifier Control is On D Press lt or gt to select TV Speakers or Amplifier NOTE This function is only available when the TV is connected to audio receivers that support CEC function 51 HDMI CEC Playback Device Control This is a new feature that uses CEC technology and allows you to control HDMI CEC compatible devices from the TV remote control via HDMI connection When there are two or more HDMI CEC devices connected to the television the device selection menu appears Highlight the desired device and then press x to select Pass Through Control Panel Remote Control 1 5 y 2 3 4 2 TZ 5 ROOT CONTENTS DVD T NOTE Press A or Y to select HDMI CEC Control in the Quick access menu and then press X The Pass Through Control Panel appears Some functions are only available when the Pass Through Control Panel is displayed on the screen Please refer to the following procedure Please refer to the Remote Control image and the following table for the key definitions of the Pass Through Control Panel e MENU and RETURN functions are unavailable when the Pass Through Control Panel is on Item Description When opening the Pass Through Control Panel GUIDE Turn off the desired HDMI CEC device EXIT Close the Pass Through Control Panel Pause Stop Rewind Forward Play MENU Skip Reverse
53. ergy Efficiency Class 32W A 32L A 40L A On mode power con 32W 31 4W sumption approx 32 34 4W 40L 47 8W Annual power consump 32W 45 8KWh y H 2 tion approx 32L 45 8KWh y 40L 69 8KWh y 1 Tested in accordance with IEC 62087 BD in default settings 2 Energy consumption XYZ kWh per year based on the power consumption of the television operating 4 hours per day for 365 days The actual energy consumption will depend on how the television is used Dimensions 32W 47 8cm H 73 5cm W 18 3cm D approx 32L 47 8cm H 73 5cm W 18 3cm D 40L 58 3cm H 92 5cm W 20 2cm D Height dimension includes foot stand Weight TV with stand 32W 6 0kg approx 32L 6 0kg 40L 9 0kg Gross weight 32W 8 5kg 32L 8 5kg 40L 12 5kg TV without 32W 5 5kg stand 32L 5 5kg 40L 8 5kg Operating Temperature 5 C 35 C 41 F 94 F Conditions Humidity 20 80 non condensing Supplied ac Remote control CT 90326 cessories 2 batteries AAA IEC R03 1 5V Screw M4 12 x 4 Specification is subject to change without notice 69 License Information DOLBY DIGITAL PLUS Manufactured under license from Dolby Laboratories Dolby and the double D sym bol are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or reg istered trademarks of HDMI Licensing LLC in the United States and other countries MPEG Layer 3 audio coding technology licensed from
54. ettings menu press A or Y to select Reset and press to reset settings NOTE If any picture settings have not been changed Reset is not available Active Backlight Control When the Active Backlight Control feature is activated High mode will control the backlighting levels depending on various scenes such as picture motion bright scene or dark scene Low mode will control the backlighting level on dark scene 1 In the Picture Settings menu press A or Y to select Active Backlight Control 2 Press lt or gt to select Off Low or High 3D Colour Management When 3D Colour Management is set to On it allows the Base Colour Adjustment feature to become available You can adjust the picture colour quality by selecting from 6 base colour adjustments Red Green Blue Yellow Magenta or Cyan o In the PICTURE menu press A or to select 3D Colour Management 2 Press lt or gt to select On or Off NOTE When a DVD movie with subtitle is playing back this mode may not work correctly Base Colour Adjustment The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference This can be useful when using an external source It only can be adjusted when 3D Colour Management is set to On In the PICTURE menu press A or Y to select Base Colour Adjustment and press 6x to enter the submenu Press A or to select an item you want to adjust and pres
55. gt to adjust the level from Off Low Middle or High The effect depends on the broadcast and is most noticeable on dark colours Cinema Mode A movie film s picture runs at 24 frames a second whereas movie software such as DVD etc that you enjoy watching on television at home runs at 30 NTSC or 25 PAL frames a second To convert this signal to reproduce a smooth motion and picture quality select the Cinema Mode 1 In the Picture Settings menu press A or V to select Cinema Mode 2 Press lt or gt to select On or Off Colour Temperature Colour Temperature increases the warmth or coolness of a picture by increasing the red or blue tint 1 In the Picture Settings menu press A or Y to select Colour Temperature and press P Press A or to select Colour Temperature and press lt or gt to select Medium Warm or Cool to suit your preference Colour Temperature Colour Temperature 4 Red Level Green Level Blue Level Medium Press A or to select Red Level Blue Level or Green Level and press lt or gt to adjust the settings as required 39 The static gamma feature allows you to adjust Static Gamma the levels of black in the picture o In the Picture Settings menu press A or Y to select Static Gamma Press lt or gt to select the number of Static Gamma 5 5 Reset This feature resets all picture settings to the factory settings In the Picture S
56. gulation Please consult the following website www toshiba eu reach for information about the presence in our articles of substances included on the candidate list according to REACH in a concentration above 0 1 weight by weight Cleaning the screen and cabinet Turn off the power clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Disposal The following information is only for EU member states Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 jum By participating in separate collection of products and batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please visit our website www toshiba eu recycling or contact your local city office or the shop where you purchased the product Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol
57. indicates that batteries and or accumulators EU must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Ca will Hg Cd Pb appear below the crossed out wheeled dust bin symbol By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please visit our website www toshiba eu recycling or contact your local city office or the shop where you purchased the product EU Conformity Statement CE This product is carrying the CE Mark in accordance with the related European Directives Responsible for CE Marking is TOSHIBA 23 Davy Road Plymouth PL6 8BY UK This product is labeled with CE Mark in accordance with the related European Directives notably Low Voltage Directive 2006 95 EC Electromagnetic Compatibility Directive 2004 108 EC and RoHS Directive 2011 65 EU Furthermore the product complies with the Ecodesign Directive 2005 32 EC EuP and 2009 125 EC ErP and its related implementing measures If this product has an integrated W
58. ing the power plug during recording may result in failure to save the recorded programme The Recording Timer function has highest priority If there is a conflict between a Automatic Power Down or Sleep Timer schedule the Recording Timer is first completed LED indicator remains lit but backlighting is turned off then Automatic Power Down or Sleep Timer is initiated When EPG recording timer is not available it turns into a reminder timer The PVR function only supports USB HDD devices with FAT32 partition If a formatting error occurs it is suggested to connect to a computer and format the device to FAT32 before connecting to the TV If the message Programme is not available to record appears when recording the content in the programme is protected and cannot be recorded The V A of bus power is 5V 0 75A Connecting the USB HDD for recording Connect the USB HDD to the USB port on the TV using an USB cable not supplied USB on the TV USB cable not supplied Press lt or gt to select No and press B USB device was connected to TV Do you want to open Media player YES E Select Back NOTE This function is only available for recording e Not guaranteed to work with all USB HDD Recording DTV Programmes To record the programme currently being viewed Press QUICK Press A or Y to select PVR Control and press gt Quick access PVR Control
59. ireless LAN feature the Radio Equipment and Telecommunications Terminal Equipment Directive 1999 5 EC is also applicable DVB is a registered trademark of the DVB Project TOSHIBA All rights reserved Reproduction in whole or part without written permission is strictly prohibited 71 TOSHIBA All rights reserved TOSHIBA 23 Davy Road Plymouth PL6 8BY UK
60. le to connect to HDMI equipment it is possible that some equip ment may not operate correctly A wide variety of external equipment can be connected to the back of the television therefore the relevant owner s manuals for all additional equipment must be referred to If the television automatically switches over to monitor external equipment return to normal television by pressing the desired channel button To recall external equipment press to select NOTE Due to copy protected signal in some DTV programme non scrambled content and scram bled content with copy freely CGMS A 00 are available via SCART analog video and audio output DTV Programme SCART Analog Output Scrambled with CGMS A 00 Copy Freely Output via SCART Scrambled with CGMS A 01 Copy No More Not output via SCART Scrambled with CGMS A 10 Copy Once Not output via SCART Scrambled with CGMS A 11 Copy Never Not output via SCART Non scrambled Output via SCART CGMS A Copy Generation Management System Analog is a copy protection mechanism for analog television signals Engish HDMI CEC Connections The basic functions of connected audio video equipment can be controlled using the television s remote control if an HDMI CEC compatible device is connected ILLUSTRATION SHOWS 32L244 l JUICE OUNO 10 Connecting an HDMI or DVI Device to the HDM
61. lect the PC input mode This function may not be available for some signal or if no signal is received The optimum points of the clock phase and sampling clock adjustments may be incomprehensible according to the input signals a Computer section and ensure that a picture is showing on the television screen The picture position may now be adjusted to suit personal preference Press MENU Press lt or gt to select SETUP and press to enter the PICTURE submenu SETUP SOUND APPLICATIONS PREFERENCES Press A or VW to select PC Setting and press to enter the submenu Language Country English UK AV connection PC Setting Auto Adjust Automatic Power Down Location Library Software Upgrade Enter Back Press A or to select Horizontal position or Vertical position and press lt or gt to adjust the settings as required PC Setting Vertical position Horizontal width Clock phase Reset 0 0 0 Lok Back Horizontal and Vertical Position Connect the PC as shown in the Connecting Horizontal Width In the PC Setting menu press A or Y to select Horizontal width Press lt or gt to adjust the settings as required Clock Phase The Clock phase matches the PC signal with the LCD display Adjusting this can clear horizontal stripes and picture blur o In the PC Setting menu press A or Y to select Clock phase 2 Press lt or gt to
62. lling on the screen Place the TV set on a stable level surface that can support the weight of the TV The LCD display panels are manufactured using an extremely high level of precision technology however sometimes some parts of the screen may be missing picture elements or have luminous spots This is not a sign of a malfunction Make sure the television is located in a position it cannot be pushed or hit by objects as pressure will break or damage the screen Also please be certain that small items cannot be inserted into slots or openings in the case j Avoid using chemicals such as air refreshers cleaning agents etc on or near the TV pedestal Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress such as weight of TV Failure to follow these instructions could result in serious injury and or permanent damaged to TV and TV pedestal Cleaning the screen and cabinet Turn off the power and clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV e Two people are required for installation e To install a wall mount from another manufacturer 1 Unplug and remove any cables and or other connections from the rear of the TV 2 Caref
63. m and use number key pad on the remote to define the information or select Auto for tuning Press A or to select Start Scan and press 6x to start tuning NOTE e The information should be given by your cable provider e Network ID is only available for Quick Scan 21 Tuner Mode Satellite Press MENU Press lt or gt to select SETUP and press to enter the submenu Press A or to select Auto tuning and press to enter the submenu Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection English Germany Satellite Picture Position Quick Setup Enter Back Press A or YW to select Scan Type and press lt or gt to select Full Scan Quick Scan or Fast Scan NOTE Quick Scan is enabled only when choosing Thor 0 8W e Fast Scan is enabled only when choosing ASTRA 19 2E Press A or to select Search Option and press lt or gt to select Free to Air or All Auto Tuning Satellite Quick Scan Free to Air Scan Type Search Option 4 Start Scan ES Edit Back Press A or Y to select Start Scan and press to start tuning Engish Manual Tuning There are two TV modes ATV and DTV that can be tuned in manually using Manual Tuning ATV mode Antenna Cable Press MENU Press lt or gt to select SETUP and press to enter the submenu Press A or to select ATV Manual Tuning and press
64. many Tuner Mode Satellite Auto tuning ATV Manual Tuning E Press lt or gt to select Satellite or LNB DTV Manual Tuning eens and press A or Y to change the setting AV connection Picture Position Quick Setup Delete Satellite Settings Switch Type ToneBurst LNB Pow Or Satellite LNB ASTRA 19 2 E amp Press A or V to select Switch Type and press lt or gt to select None ToneBurst DiSEqC 2way DiSEqC TSE WA 4way or Single Cable Lower LOF N A Upper LOF N A Change Pl Transponder Settings Satellite ASTRA 19 2 E 3 Press 6 to save the settings Satellite Settings Switch Type ToneBurst No Satellite LNB 1 ASTRA 19 2 E 1 2 ASTRA 23 5 E 2 3 4 Press A or to select LNB Power and Transponder 1 45 11683 MHz Lower LOF 9750 press lt or gt to select On or Off Geto Delete Delete a satellite 1 In the Satellite Settings menu press A or Y to select the satellite you want to delete 2 Press the mE button on the remote to delete the selected satellite 3 Press lt or gt to select YES to confirm or select NO to exit and press NOTE It is not possible to delete posi 24 tion No 1 Add a transponder D In the Satellite Settings menu press A or to select a satellite and press Satellite Settings Switch Type LNB Power Satellite ASTRA 19 2 E Transponder 1 122 10714 MHz Lower LOF
65. mer 00 00 Media Player System information HDMI CEC Control Speakers TV Speakers MHL Control 2 The Pass Through Control Panel appears Been ee NOTE The Pass Through Control Panel is only available when viewing photo video or listening to music Operating an MHL compatible Device MHL is a new mobile audio video interface standard for direct connection with MHL enabled mobile devices to MHL enabled TVs providing instant access to a wealth of mobile content with ease of control through the TV remote controller Remote Control Pass Through Control Panel 1 3 4 m5 Item Description ntry MHL Control Remote Control EXIT Exit In contents menu Up Down Left Right Select RETURN Exit MHL Control Pass Through Control Panel GUIDE Record EXIT Close the Pass Through Control Panel When viewing the video or listening to music Pause Stop Rewind Forward Play Skip Reverse Skip Forward 54 USB HDD Record Function This function can be used to record and play digital broadcast programmes function is dependant on country selection Read the precautions below before recording or viewing programmes using the USB HDD record function NOTE e PVR function is only available in Austria German and Switzerland The digital reception function of this television is only effective in the countrie
66. nd 9 Press 8 to enter the Auto tuning menu NOTE Please make sure the aerial is connected to the TV before tuning Auto tuning 4 ATV and DTV ld Start Scan LOK Edit Back Press A or to select Tuning Mode and press lt or gt to select ATV DTV or ATV and DTV Press A or to select Start Scan and press W Auto tuning Progress ATV 6 E DTV 0 Channel S54 Station to exit ATV scan 17 In Antenna Satellite mode the ATV channel list appears after auto tuning Press to enter Satellite Settings menu Auto tuning DTV Services Found 0 ATV Services Found 1 Press to enter Satellite Settings menu Press A or V to select Switch Type and press lt or gt to select None ToneBurst DiSEqC 2way DiSEqC Away or Single Cable Satellite Settings Switch Type 4 LNB Power Satellite ASTRA 19 2 E Sy edit Back NOTE e None is being used when the satellite dish will control only one universal Low Noise Block LNB with a single satellite e g Astra 19 2 As a rule most households use just one satellite e ToneBurst sends a 22 kHz signal ToneBurst is only necessary for simple LNBs not universal LNBs The 22 kHz signal is needed for switching LNBs with multifeed signals as well as for changing between low and high band e DiSEqC 2way automatically switches between two LNBs which receive different satellites at the same time e g Astra 19 2
67. nel Update Channel Grouping Data Transter Common Interface Back When Channel Grouping is On the channel change by P and P will be within a single service group press ATV DTV on the remote control can be still used for change services among ATV DTV Video DTV Radio and DTV Text 29 Common Interface The Common Interface Slot situated on the side of the television enables the insertion of a CAM Conditional Access Module and card These are purchased from a service provider and allow additional subscription broadcasts to be viewed For information see a service provider 1 Insert the CAM and card into the Common Interface Slot following the instructions provided with the CAM A box will appear on the screen to confirm that the CAM has been inserted In the DTV Settings menu press A or Vv to select Common Interface and press x to enter the submenu Details of the CAM should now be available NOTE The software updating of Cl Plus CAM may be automatically executed At this time any Recording Reminder pro gramme timer will be cancelled Engish Data Transfer Press lt or to select TV to USB This function is used to export the channel list and transponder table from the TV to a USB so they Channel list can be edited ona PC Please Insert USB Memory NOTE e The function is only available when Tuner Mode is Satellite Antenna Satellite or Edit RETURN Back Cable Satellite e
68. o press the button to select HDMI 1 or HDMI 2 mode 11 To connect a DVI device Connect an HDMI to DVI adapter cable HDMI type A connector to the HDMI 1 The maximum recommended HDMI DVI cable length is 2m e An HDMI to DVI adapter cable transfers video only e Separate analogue audio connection is not supported for audio receivers ILLUSTRATION SHOWS 32L244 TMULINONLLNUNUILUOCUUUMLA TOSHIBA A ae 8 46 e a p3 3 HDMI to DVI adapter cable not supplied DVI device To ensure that the HDMI or DVI device is reset properly it is recommended that you follow these procedures e When turning on your electronic components turn on the television first and then the HDMI or DVI device e When turning off your electronic components turn off the HDMI or DVI device first and then the television 1 EIA CEA 861 D compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for reception of high definition video signals Because this is an evolving technology it is possible that some devices may not operate properly with the television HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries 12 Connecting a Computer With either an RGB PC or an HDMI connecti
69. on you can watch your computer s display on the television Op 1 When connecting a PC to the HDMI HDMI terminal on the TV use an HDMI cable e TOSHIBA o ER A al SMI 128 Op 2 When connecting a PC with DVI terminal use an HDMI to DVI cable PC Input Op 3 When connecting a PC to the RGB PC terminal on the TV use a RGB 15 pin cable For acceptable PC and video signal formats see page 14 NOTE e The edges of the images may be hidden e If connecting a certain PC model with a unique PC signal the PC signal may not be detected correctly 13 Acceptable Video signals through HDMI terminals Resolution H Frequency KHz V Frequency Hz 480i 15 750 60 000 480p 31 500 60 000 Acceptable PC signals through HDMI terminals Resolution ee H Polarity V Polarity H Total V Total 640 x 480 25 175 Negative Negative 800 525 640 x 480 31 500 Negative Negative 832 520 640 x 480 31 500 Negative Negative 840 500 800 x 600 36 000 Positive Positive 1024 625 800 x 600 40 000 Positive Positive 1056 628 800 x 600 50 000 Positive Positive 1040 666 800 x 600 49 500 Positive Positive 1056 625 1024 x 768 65 000 Negative Negative 1024 x 768 78 750 Positive Positive 1280 x 768 79 500 Negative Positive 1360 x 768 85 500 Positive Positive 1280 x 1024 108 000 Positive Posi
70. product at all times DO NOT use makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufacturers approved stand bracket or legs with the fixings provided according to the instructions DO NOT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off by withdrawing the plug make sure your family know how to do this Special arrangements may need to be made for people with disabilities DO NOT continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off withdraw the mains plug and consult your dealer WARNING excessive sound pressure from earphones or headphones can cause hearing loss ABOVE ALL NEVER let anyone especially children push or hit the screen push anything into holes slots or any other openings in the case These actions will damage screen or internal parts NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry THE MAINS PLUG IS USED AS THE DISCONNECTING DEVICE AND THEREFORE 4 SHOULD BE READILY OPERABLE Installation and Important Information Where to install Locate the television away from direct sunlight and strong lights soft indirect lighting is recommended for comfortable viewing Use curtains or blinds to prevent direct sunlight fa
71. r returns or the plug is reconnected Any changes implemented by the broadcasting station may affect programme scheduling e Scheduling of multiple consecutive programmes may result in the beginning of each programme not being recorded e Accurate start finish time for recording is reliant on broadcasters maintaining correct time stamp if this not the case the recording will fail Programmed recording cannot take place if the power plug is not connected e USB HDD recording feature is not available in all countries e When the USB HDD is formatted all the data stored on the HDD will be erased PVR Precautions USB devices are suggested for external storage If an HDD is used the total capacity cannot exceed over 2T anda single boot sector cannot exceed 1T A storage capacity larger than 300MB is required A single HDD can only be divided into a maximum of 9 boot sectors A maximum of 300 files can be recorded Additional files should be removed to avoid difficulties on recording When there are no recorded files in the storage device the playlist button below the Quick menu cannot be selected Once connected to a storage device the PVR obtains relevant data and required storage capacity Longer time is needed for storage devices with larger storage capacities When reading files most of the system functions are not available such as RC control subtitle display etc Disconnect
72. rage device from the TV and then the TV will be reset automatically Channel list Please remove USB memory then TV will be reset automatically 3 0 Edit Back Importing from USB to TV Transponder Table o Repeat step 1 3 as Exporting from TV to USB 2 Press lt or gt to select USB to TV Transponder Table Please Insert USB Memory USB to TV Back amp Press to import Transponder Table Please Wait RETURN Back After importing the transponder table please see page 24 to follow the instructions and re select the satellite for tuning Transponder Table OK Back 31 programme details for all available channels Information 1 Press and the information screen will appear giving details of the channel and programme currently being viewed fm 3 BBCPariament English wil 10 18 Sun 17 40 2012 TR Westrinsier Han 07 00 11 30 Next in 12 0 S0 16 0 as dt 0 3 72Minutes Left Recorded coverage of questions in the House of Commons to Prime Minister Gordon Brown from Wednesday 26 November H Change Ga Exit Press A or W to choose from Now or Next information guide On Screen Information Icons Icons will appear on the Information screen giving details about the programmes being broadcast Details of these icons are listed below Description Digital On Screen Information and Programme Guide When viewing in digital mode the on screen informa
73. ress Press lt or gt to select YES to confirm or select NO to exit and press Reset TV B Previous settings will be lost Press EXIT for no change NO E Select Enter Back DTV Settings Channels The channel order may be changed to suit your personal preference NOTE This function is only available in DTV mode o Press MENU Press lt or gt to select SETUP and press to enter the submenu 0 E PICTURE SOUND SETUP APPLICATIONS PREFERENCES D Press A or _ to select DTV Settings and press 8 to enter the submenu Press A or to select Channels and press DTV Settings Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Data Transter Common Interface Enter Back Channels Rossia 1 Rossia 24 NIV TRK 5 kamal Bibigon Service Information Radio Three Re number H Favorite M Skip Sort Re number Press the ma button on the remote to renumber the highlighted channel 6 Edit the channel number using the number keys on the remote and press 6X Channels a J J ABC Jazz 2 ABCt ABC2 ABC3 ABC4 Input Enter Back Favorite Press the mE button on the remote A icon appears Channels TRK 5 kamal Bibigon Service Information Radio Three O Re number Favorite H Skip m Press to show the Channel List and pres
74. ress lt or gt to choose between Dual or Dual2 Dual Bass Treble Balance Stable Sound Dynamic Range Control Advanced Sound Settings Audio Level Offset Digital Audio Output Audio Description Back Bass Treble and Balance The sound controls are accessible in digital and analogue modes o Press MENU Press lt or P to select SOUND and press to enter the submenu 2 Press A or to select Bass Treble or Balance and press lt or gt to change the setting not supported o Press MENU Press lt or gt to select SOUND and press to enter the submenu Press A or to select Dynamic Range Control and press lt or gt to select On or Off Voice Enhancement Voice Enhancement emphasises the frequency range of the speaker s voice making it easier to catch what they are saying Press MENU Press lt or gt to select SOUND and press to enter the submenu Press A or to select Advanced Sound Settings and press to enter the submenu Press A or to select Voice Enhancement and press lt or gt to select On or Off Advanced Sound Settings Voice Enhancement 4 Bass Boost off Low EEL Back 34 Bass Boost Bass Boost enhances depth of the sound o Press MENU Press lt or gt to select SOUND and press to enter the submenu 2 Press A or W to select Advanced Sound Settings and press to enter the submenu Press A or to select Bass
75. s Base Colour Adjustment Hue Saturation Brightness LL Red E Green H Blue Yellow E Magenta H Cyan Reset RETURN Back Press lt or gt to select Hue Saturation or Brightness Base Colour Adjustment Saturation Brightness 0 0 Press A or to adjust the settings as 4 required NOTE In the PC Input mode this function is not available 40 Digital Noise Reduction DNR Digital Noise Reduction enables you to soften the screen representation of a weak signal to reduce the noise effect o In the PICTURE menu press A or to select DNR Press lt or gt to select Off Low Middle or High NOTE This function is not available for HDMI input MPEG NR Noise Reduction When watching a DVD the compression may cause some words or picture elements to become distorted or pixelated Using the MPEG NR feature reduces this effect by smoothing out the edges In the PICTURE menu press A or to select MPEG NR Press lt or gt to select Off Low Middle or High Enjoy Photos through USB Port The Photo Viewer allows you to playback image files from a USB storage device Photo Resolution 15360x8704 Base line 1920x8 x 1088x8 Progressive 1024x768 non interface 9600x6400 interface 1200x800 9600x6400 View Photo Files Press A V lt or gt to select the folder you wish to view and press to enter 1 Insert a USB storage
76. s listed in the Country section of the SETUP menu Depending on country area some of this television s functions may not be available Reception of future additional or modified services can not be guaranteed with this television The recording function has been designed for private use and entertainment in your home environment Please not that any commercial use of the recording function could lead to copyright infringement of authors rights Toshiba ask you to respect the intellectual property rights of third parties e Before recording to a device connected to the TV make a test recording and check the recording performance Programmes that are prohibited from copying due to copyright protection cannot be recorded Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost e Toshiba shall not be liable for damages of any kind of whatsoever breakdown of the recording device modification or loss of the recorded content etc resulting from malfunction operating failure or incorrect operation due to combining with another connected device e If you connect a USB HDD that has been used with a PC or another TV only programmes which are recorded using this TV can be playback e Switch the TV to standby before you disconnect the USB HDD Not doing so may result in loss of the
77. s lt or gt to Favorite The desired channel is displayed on the list Channel List 4 Favorite ow 804 Rossia 24 en 806 TRK 5 kamal Skip Press the button on the remote A s icon appears Channels Rossia 24 NIV TRK 5 kamal Bibigon Service Information Radio Three C Re number Favorite ERS Sort Lock Press the mE button on the remote A i icon appears Channels TRK 5 kamal Bibigon Service Information Radio Three O Re number Favorite E Skip O Lock Sort Press A or to select the desired channel and then press A tick icon appears Channels Rossia 1 Rossia 24 NIV TRK 5 kamal Bibigon Service Information Radio Three Store Back Press A or YW to select the channel you wish to swap with the one selected in the previous step and then press Channels Rossia 1 Rossia 24 NIV TRK 5 kamal Bibigon Service Information Radio Three GK Store RETURN Back The name of the two channels are swapped Channels TRK 5 kamal Bibigon Service Information Radio Three CNN CO B EIT text O Re number M Favorite Sort Subtitle and Audio You can choose the Subtitle Type or Audio Type from Normal or Hearing Impaired If the Hearing Impaired is selected it provides subtitle services to deaf and hard of hearing viewers with additional descriptions Subtitle Language or Audio Language allow a programme or film to be viewed with a choice of
78. screen for any length of time they could become conspicuous it is always advisable to reduce both the brightness and contrast settings e Very long continuous use of the 4 3 picture on a 16 9 screen may result in some retention of the image at the 4 3 outlines this is not a defect of the LCD TV and is not covered under the manufacturers warranty Regular use of other size modes e g Super Live will prevent permanent retention NOTE Interactive video games that involve shooting a gun type of joystick at an on screen target may not work with this TV SYMBOL SYMBOL DEFINITION INSTRUCTIONS The exclamation point within on equilateral triangle to alert the user to the presence of important operating and maintenance servicing instruction in the literature accompanying the appliance WARNING To prevent the spread of fire keep candles or other open flames away from this product at all times The Remote Control Simple at a glance reference of your remote control 3 TEXT KWE D171 TOSHIBA CT 90326 Switch between TV ON or Standby Switch between external input sources Still Picture To display the teletext screen TEXT subtitle pages if available Stereo Bilingual transmissions Number buttons Audio Description Switch between ATV and DTV Change the volume Change the channel 00ND UN RWD o 12 In TV mode Display on screen information In Text mode Access the index page
79. separated several partitions by PC and multiple Partition appear on the Device List menu press A or V to select the Partition you want to format When the USB HDD or Partition is formatted all the data stored on the USB HDD or Partition will be deleted Scheduling Priority If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule programmed recording will be performed correctly e When Start Padding Time and End Padding Time are set see page 58 the start time and end time will be the time plus the additional minutes If scheduling times overlap priority will be given to the programmed recording which starts first When the programmed recording that started first ends recording will switch to the next scheduled programme At this time depending on how far the scheduling times overlap the beginning section of the next scheduled programme may not be recorded 59 This feature allows you to set the television to Preference Controls On Timer turn on automatically to a preset channel at a certain time of day or after a certain length of time Press MENU Press lt or gt to select APPLICATIONS and press 6x to enter the submenu Jonghe PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or to select On timer and press to enter the submenu APPLICATI
80. ser Slot Frequency Password PIN Reset Verify Slot Frequency Back Press A or to select Done and press to enter Positioning menu Adjust the dish position manually for the maximum Signal Level strength The signal level strength is displayed from 0 to 100 A high signal level can be achieved by adjusting the satellite dish the best way possible Positioning Satellite 1 ASTRA 19 2 E PLease adjust the dish position manually and then select Done Signal Level LE 0 Done Enter fl Transponder Press to enter Auto Tuning Satellite menu B Press A or V to select Search Option and press lt or gt to select Free to Air or All Auto Tuning Satellite Scan Type Quick Scan Search Option 4 Free to Air Start Scan E Edit Back When choosing the search option All all channels including encrypted ones of the satellite will be searched for If you wish to only search for unencrypted free channels please select Free to Air In this case the channel scan will be completed faster Press A or to select Start Scan and press Auto Tuning Satellite Progress 0 L ASTRA 19 2 E 10729 MHz V R 22000 Stop The search will begin for all available stations The slide bar will move along the line as the search progresses You must allow the television to complete the search When the search is complete the television will automatically select channel 1 This ma
81. soundtrack language provided they are currently being broadcast In the DTV Settings menu press A or V to select Subtitle And Audio and press 6x to enter the submenu Press A or Y to select Subtitle Display and press lt or gt to select On or Off Press A or to select Subtitle Type or Audio Type and press lt or gt to select Normal or Hearing Impaired Press A or to select Digital Subtitle Language Digital Subtitle Language 2nd Audio Language or Audio Language 2nd and press lt or gt to select your preferred language Password Change the 4 digit parental control password The factory default password is 1276 o In the DTV Settings menu press A or V to select Password and press to enter the submenu DTV Settings Channels Subtitle and Audio Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Data Transter Common Interface Enter Back 2 Enter a new 4 digit password and re enter the new password again to confirm Password New Password Confirm Password Hee cs Input EES NOTE 0000 cannot be used Parental This function blocks channels or programmes that you do not want to or that you do not want your children to watch A password is required to access this function The factory default password is 1276 NOTE When Parental Control is activated you will need to enter the 4 digi
82. ss A or Y to select Select Device and press Recording Setup Select Device One Touch Recording Time 30 Minutes Start Padding Time None End Padding Time None Device Test Format Device Ea Back Press A or to select USB HDD and Partition you want to record Select Device Enter Back One Touch Recording Time In the Recording Setup menu press A or to select One Touch Recording Time Press lt or gt to adjust the recording time Padding Time In the Recording Setup menu press A or Y to select Start Padding Time Press lt or gt to select None 1 Minutes 3 Minutes 5 Minutes or 10 Minutes Recording will start at the selected number of minutes prior to the recording start time amp Press A or Y to select End Padding Time o Press lt or gt to select None 1 Minutes 3 Minutes 5 Minutes or 10 Minutes Recording will end at the recording end time plus the selected number of minutes Device Test In the Recording Setup menu press A or V to select Device Test and press w USB HDD operation test will start Wait until the test ends NOTE The results of the device test are only a guide The device may not function as shown in the results Format Device In the Recording Setup menu press A or V to select Format Device and press Press lt or gt to select YES to confirm or select NO to exit and press W Wait until formatting ends NOTE e If the USB HDD is
83. st time use plug in the television and press the button The Language menu will appear i Francais Deutsch Espanol Italiano Portugu s Select Dk Enter NOTE This function is accessed in the SETUP gt Quick Setup menu Press A V lt or gt to select your language Press to enter Quick Setup menu Press A or VW to select Country and press lt or gt to select your country Quick Setup Germany German Turkish German Turkish Digital Subtitle Language Digital Subtitle Language 2nd Audio Language Audio Language 2nd Select Tuner Mode Press A or to select Digital Subtitle Language Digital Subtitle Language 2nd Audio Language and Audio Language 2nd then press lt or gt to select your preferred language Press to select Time Zone Time Zone B This function allows you to manually set the time zone Tuner Mode Back Press lt or gt to select Mainland or Canary Islands NOTE This function is only available when Country is Spain 16 6 Press to select Tuner Mode Tuner Mode Location RETURN Back Select Press lt or to select Satellite Antenna Cable Antenna Satellite or Cable Satellite If Satellite is selected the following displays except in Austria Germany and Switzerland Tuner Mode B Pay TV channels may not be supported for the selected country As a result some programmes could be unavaila
84. t password before you enter the DTV Settings submenu under the SETUP menu After auto tuning all the channel blocks will be cleared o In the DTV Settings menu press A or V to select Parental and press to enter the submenu 2 Enter the 4 digit password amp Press lt or gt to set the age rating from age 3 18 or select None to turn this function off NOTE This function is available for pro grammes with Age Rating information Standby Update Control In the DTV Settings menu press A or Y to select Standby Update Control Press lt or gt to select Enable or Disable Standby Channel Update If the Standby Channel Update is set to On when the TV is in standby mode Digital Tuning is automatically executed and any new channels are saved o In the DTV Settings menu press A or V to select Standby Channel Update 2 Press lt or gt to select On or Off NOTE Standby Channel Update is only avail able when Standby Update Control is Enable Channel Grouping There are Video Radio and Text services combined in a channel list for DTV services The function provides the selection of channel change with one service group or among all services by pressing P A and P Y 1 In the DTV Settings menu press A or V to select Channel Grouping 2 Press lt or gt to select On or Off DTV Settings Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Chan
85. t the power plug when the TV is in standby mode and the MHL device is being connected Please take note EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by fire earthquake accidental damage intentional misuse of the product use of the product in improper conditions loss and or damage caused to the product while in the possession of a third party any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal operation or misuse of the product The digital reception function of this television is only effective in the countries listed in the Country section of the SETUP menu Depending on country area some of this television s functions may not be available Reception of future additional or modified services can not be guaranteed with this television If stationary images generated by 4 3 broadcasts text services channel identification logos computer displays video games on screen menus etc are left on the television
86. tandby mode will reduce energy consumption but will still draw some power 15 Remote sensor RED LED Standby GREEN LED Power on Using the Remote Control To set up the television you will now need to use the on screen menus Press MENU on the remote control to see the menus The on screen menu appears as a list of five topics As each symbol is selected by pressing lt or gt on the navigation ring on the remote control To use the options press to enter the sub menu Then press A or VW on the navigation ring to move up and down through the menu and use to select the required choice Follow the on screen instructions The functions of each menu are described in detail throughout this manual Using the Controls on the TV Press 4 to adjust volume Press to change programme selection then press 4 to adjust programme selection Press and hold until Source List is displayed then press lt to scroll through the list until desired input source is located Please always refer to the owner s manual of the equipment to be connected for full details NOTE Inserting the headphone plug will mute the sound from all speakers Engish Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected To set up the television use the buttons on the remote control as detailed on page 7 First Time Using For fir
87. te control Channels can also be selected using P N and Pv Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time channels are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press C1 I to select Stereo or Mono Bilingual If a bilingual programme is offered the word Dual will display on screen To change between languages press C I I to switch between Dual 1 and Dual 2 Quick Access Menu Subtitles If Subtitles are available for your current programme pressing the SUBTITLE button will toggle Subtitles on or off Picture Still This feature is used to hold a still image on the screen Press to hold an image on the screen press W again to cancel Input Selection Use the Input Selection feature if the television Quick access helps you access some options quickly such as PVR Control Picture Size Picture Mode Sleep Timer Media Player System Information HDMI CEC Control Speakers and MHL Control Press the QUICK button to display the Quick access menu and use A or to select the option you would like to change Quick access PVR Control Picture Size Picture Mode Sleep Timer Wide Standard 00 00 Media Player System information HDMI CEC Control Speakers MHL Control TV Speakers NOTE Quick access items are different de
88. tion and programme guide provide access to Video format HD SD Video Aspect Teletext Subtitle Single Multi Event info Multi audio track Parental rating Encrypted Recording Reminder New Locked Recording Guide Service type TV Radio TEXT Select the on screen guide by pressing GUIDE The guide screen will appear highlighting details of the channel and Skip programme currently being viewed This Mono may take a few moments to appear Stereo Press lt or gt for information on other programmes scheduled for the channel Dual mono selected Multichannel Dolby D Dolby Digital For details of other programmes currently available press A and Y to scroll up and down the channel list Dolby D Dolby Digital NOTE In order for the recording operation HE AAC Audio Coding to work properly the media recorder must be set to the same time as the TV AD Audio Description x Hearing Impaired Regarding the process for recording please refer to the owner s manual of the recording equipment 32 General Controls The General Functions allow you to select channels and information adjust sound features personalise the picture style and select any connected external equipment Selecting Channels To select a channel use the numbered buttons on the remo
89. tive 1280 x 1024 135 000 Positive Positive 1920 x 1080 148 500 Positive Positive 14 Using the Controls While all the necessary adjustments and controls for the television are made using the remote control the buttons on the television may be used control some functions ILLUSTRATION SHOWS 32L244 Common Interface DVB COMMON INTERFACE USB lt USB HDMI 2 INPUT CKET HDMI 2 MHL Power Up down Volume or channel Programme Volume Source p Headphone Switching On If the RED Standby LED is unlit check that the plug is connected to the power supply If the picture does not appear press on the remote control it may take a few moments To put the television into Standby press on the remote control To view the television press again The picture may take a few seconds to appear For energy saving We recommend that you use the television with factory settings These settings are designed for energy saving Unplugging the mains plug will reduce energy use to zero This is recommended when the television is not being used for long periods e g when on holiday Reducing the brightness of the screen will reduce energy use Energy efficiency reduces energy consumption and can save money by reducing electricity bills NOTE Putting the television into s
90. to enter the submenu PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press A or to select Panel Lock and press lt or gt to select On or Off PREFERENCES Recording Setup HDMI CEC Control Teletext Panel Lock Auto Format 4 3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistration Back When Panel Lock is On a reminder will appear when the buttons on the television are pressed If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control Auto Format Widescreen When this television receives a true Widescreen picture and Auto format is On it will automatically be displayed in Widescreen format irrespective of the television s previous setting o In the PREFERENCES menu press A or Y to select Auto Format 2 Press lt or gt to select On or Off 4 3 Stretch When 4 3 Stretch is activated this function will switch 4 3 format programmes into a full screen picture o In the PREFERENCES menu press A or to select 4 3 Stretch 2 Press lt or gt to select On or Off NOTE In HDMI signal format this function is available Blue Screen When Blue Screen is selected the screen will turn blue when no signal is received o In the PREFERENCES menu press A or Y to select Blue Screen 2 Press lt or gt to select On or Off NOTE This function is not available in DTV mode Sid
91. ully lay the front of the unit face down on a flat cushioned surface such as a quilt or blanket 3 Follow the instructions provided with your wall bracket Before proceeding make sure the appro priate bracket s are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket 4 Always use the screws supplied or recommended by the wall mount manufacturer Removing the Pedestal Stand 1 Carefully lay the front of the unit face down on a flat cush 32W244 32L 40L244 x 4 ioned surface with the stand hanging over the edge 2 Remove the screws 3 After the screws are removed hold the pedestal stand in a place then remove it from the TV by sliding away from the bottom of the TV NOTE Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel When using MHL Mobile High definition Link e Interoperability with MHL devices of other manufacturers is not guaranteed e Toshiba does not provide any guarantee therefore against operational failure such as that described below when an MHL source is connected to the TV No picture or sound Some of the functions do not work be remote operation from the TV e If the MHL does not work properly also contact the manufacturer of the source device for advice on its use Do not disconnect the power plug when the TV is active and the MHL device is being connected Do not disconnec
92. with the specification listed below Receiving systems DVB T Broadcast systems channels UK UHF 21 68 France VHF 05 10 VHF 01 05 UHF 21 69 Germany VHF 05 12 UHF 21 69 Austria VHF 05 12 UHF 21 69 Switzerland VHF 05 12 UHF 21 69 Italian VHF 05 UHF 21 69 Spain UHF 21 69 Nederlands VHF 05 12 UHF 21 69 Greece VHF 05 12 UHF 21 69 DVB C Broadcast systems Broadcast systems channels PAL I UHF UK21 UK69 PAL B G UHF E21 E69 VHF E2 E12 S 1 S41 SECAM L UHF F21 F69 VHF F1 F10 B Q SECAM D K UHF R21 R69 VHF R1 R12 2 D E F G H H1 H2 DVB S DVB S2 Broadcast systems L244 D W244 D series only Video Input External connections EXT1 PAL SECAM NTSC 3 58 4 43 Input Output 21 pin SCART Auto Mixed RGB Composite S Video TV Out EXT2 EXT3 Input RCA jacks EXIT2 Video RCA jacks EXITS Y P C P C RGB PC Input D sub RGB HDMI 1 2 Input HDMI Audio EXT2 EXT3 RCA jacks Audio L R shared Digital Audio Output Coaxial S PDIF USB Port Interface version USB 2 0 USB Class USB Flash Drive File system FAT32 Headphone socket Stereo 3 5 mm stereo A2 Nicam 2 Carrier System Visible Screen Size 32W 80cm approx 32L 80cm 40L 102cm Screen Resolution 32W 1366 x 768 H x V pixels 32L 1920 x 1080 40L 1920 x 1080 Display 16 9 Sound Output Main 7W 7W at 10 distortion Power consumption 32W 64W approx 32L 70W 40L 98w Standby power con 0 3W sumption approx En
93. y not be a clear picture or the signal may be weak so the station order can be changed using ATV DTV Manual Tuning in the SETUP menu 19 Engish Setting the Channels NOTE When Parental is activated the 4 digit password is needed Auto Tuning Press A or to select Start Scan and press to start Auto Tuning The Auto tuning function will completely re tune the television and can be used to update Auto tuning the channel list Progress NOTE It is recommended that Auto tuning is N run periodically to ensure that all new services are added NOTE All the current channels and settings for example the locked channels will be lost Channel Station Tuner Mode Cable Switching between tuner modes will change the features available on your television All the current channels and settings for Tuner Mode Antenna Press MENU Press lt or gt to select SETUP and press to enter the submenu example the locked channels will be lost fo In the SETUP menu press A or to select PICTURE SOUND SETUP APPLICATIONS PREFERENCES Tuner Mode and press W 2 Press A or to select Auto tuning and pee eer D SCEE YES GENO press x to enter the submenu Tuner Mode This may change the features available on your TV Continue Language English Country Germany Tuner Mode Antenna Satellite Settings Auto tuning ATV Manual Tuning E Select Enter Back PV

Toshiba L2443/32 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents