Sanyo DVP-P1U User's Manual
Contents
1. You can print the images according to the DPOF settings set with your camera for example DPOF standard printing index prints and printer controlled settings for example is possible DPOF trimming is not available 1 Setthe printer to the DPOF print mode see page 29 e The DPOF settings are shown on the LCD monitor Mode Number of index prints Image Number Total number of prints Setting v Borderless ISharpness 40 English PRINTING 2 Press the PRINT button e The PRINT indicator lights and printing begins e During printing the remaining number of prints Remains is shown Mode Image Number Setting NOTE If the total number of prints indication does not show more than 99 e The indication for the total number of prints cannot show more than 99 However you can specify 100 or more prints e When the specified total number of prints is 100 or more the total number of prints indication appears as During printing the remaining number of prints indication also appears as when the remaining number of prints becomes 99 the correct number is shown on the display If printing does not begin e It is not possible to print if there are 1980 or more DPOF specified prints Decrease the number of specified prints and repeat the procedure You can specify borderless prints and sharpness printing see page 42 English 41 PRINTING OTHER PRINT2. SETTINGS The following printing functions are available Borderless prints Borderless The image is printed with no white border around the picture Date imprint Date The date the image was captured is imprinted in the corner Sharpness printing Sharpness The images are printed with extra sharp outlines Due to the difference in the respective horizontal to vertical ratios of the digital image and the paper the upper and lower portions of the image may be cropped in border less prints 1 Setthe printer to the desired print mode see page 29 e The settings that can be customized differ depending on the selected print mode Index print mode Not available Index Select All Image and One Image print modes Borderless prints date imprint and sharpness printing can be specified ID Size print mode Sharpness printing can be specified DPOF print mode Borderless prints and sharpness printing can be specified 2 Specify the image and the number of prints Index Select print mode see page 32 ID Size print mode see page 34 Print one Image mode see page 36 All Image print mode see page 38 DPOF print mode gt see page 40 3 Specify printing functions Press the MENU button to move the menu pointer gt to the Setting menu Press the or button e Press the or button to check the checkbox for the desired print functions 4 Press the PRINT button The PRINT lamp lights
3. e f the paper is not to be used for a while remove it from the paper tray e Only one side of the paper is suitable for printing e Load the paper with the print side facing down e A maximum of 50 sheets can be loaded in the paper tray How to load the paper 1 Open the cover of the paper tray 2 Confirm the print side e The print side of the paper is shiny and the non print side indicates a place for writing the address 24 English SETUP 3 insert the paper in the paper tray Insert the paper with the print side facing down and with the top edge near the pull handle side of the paper tray NOTE e Images captured with the camera held vertically are rotated 90 degrees and printed Image captured with Image captured with the camera held the camera held vertically horizontally English 25 SETUP Installing the paper tray 1 Open the paper tray slot cover 2 Slowly insert the paper tray into the paper tray slot e Slowly insert it all the way in 3 Close the paper tray slot cover E To remove the paper tray Open the paper tray slot cover grasp the paper tray pull handle and pull out the paper tray CAUTION When printing is finished e Be sure to remove the paper from the paper tray 26 English Pull handle SETUP INSERT THE CARD Cards that can be used with this printer e The cards listed below can be used with this printer Only one card can be inserted at a time
4. e SD Memory Card MultiMedia Card e CompactFlash Microdrive e SmartMedia except for SmartMedia cards that operate at 5V e Memory Stick An adapter is required to use Memory Stick Duo Note that only card data which was recorded in the DCF compliant format can be printed Image data which was saved on a computer cannot be printed How to insert the card 1 Turn on the power see page 21 2 Open the card slot cover Card slot cover English 27 SETUP 3 Insert the card e Choose the correct slot for your type of card e Take care that the card is oriented correctly Slot A and firmly push it all the way in Slot A SmartMedia SD Memory Card MultiMedia Card Memory Stick Slot B CompactFlash Microdrive When a card is inserted the MEMORY CARD indicator will light MEMORY CARD indicator 4 Close the card slot cover How to remove the card 1 Open the card slot cover 2 Pull out the card The MEMORY CARD indicator will go out 3 Close the card slot cover CAUTION e Do not remove the card while the MEMORY CARD indicator is flashing or in the mid dle of printing 28 English PRINTING SETTING THE PRINT MODE This section explains how to set the print mode 1 Turn ON the power and insert a card into the correct card slot see pages 21 28 2 Press the MENU button to move the menu pointer gt to the Mode menu 3 Press the or button e Keep the or button depressed un
5. number of prints Total are Setting ViBorderlelis Vitlate sharpness shown on the LCD monitor a A maximum of 19 prints can be speci rae Navi fied You can press the CANCEL button to UL 2 cancel the settings Number of prints 2 Total number of prints 3 Press the PRINT button e The PRINT indicator lights and printing begins e During printing the remaining number of prints Remains is shown NOTE If the total number of prints indication does not show more than 99 e The indication for the total number of prints cannot show more than 99 However you can specify more 100 or more prints e When the specified total number of prints is 100 or more the total number of prints indication appears as During printing the remaining number of prints indication also appears as when the remaining number of prints becomes 99 the correct number is shown on the display You can specify borderless prints date imprint and sharpness printing see page 42 English 33 PRINTING ID SIZE PRINTS ID size images can be printed on one sheet of paper A set of three 30mm x 24mm images and three 45mm x 35mm images is printed on one sheet of paper p 1 Setthe printer to the ID Size print mode see page 29 e The image number and number of prints is shown on the LCD monitor Mode WID Size Image i mage Number Number Number of prints Se
6. receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help e Changes or modifications not expressly approved by the party responsible for compli ance could void the user s authority to operate the equipment N FC Tested To Comply With FCC Standards C FOR HOME OR OFFICE USE Declaration of Conformity N Model Number DVP P1U Trade Name SANYO Responsible party SANYO FISHER COMPANY Address 21605 Plummer Street Chatsworth California 91311 Telephone No 818 998 7322 This device complies with Part 15 of the FCC Rules Operation is subject to the fol lowing two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation J i English FOR CANADIAN USERS e This Class B digital apparatus complies with Canadian ICES 003 English i BEFORE READING THE MANUAL Design 2003 SANYO Electric Co Ltd Program 2003 SANYO Electric Co Ltd Documentation 2003 SANYO Electric Co Ltd Copyright 2003 SANYO Electric Co Ltd All rights reserved All other company and product names are registered trademarks or trademarks of their respective owners Caution e It is forbidden to copy this manual whole or in part without prior
7. written permission e All images and illustrations given in this manual are for explanation purposes and may differ slightly from that of the actual product Also actual specifications are sub ject to change without prior notice and therefore may differ from the contents of this manual e Sanyo Electric shall not be held responsible for any problems resulting from the use of this printer e Sanyo Electric declines all responsibility for damages due to improper use of the printer failure to adhere to the instructions given in this manual or repairs or changes done by those other than a technician authorized by the manufacturer e Sanyo Electric shall not be held responsible for any damage caused by optional devices or consumable items used with the printer other than those supplied with the printer or those specified by Sanyo Electric e Sanyo Electric shall not be held responsible for any losses or loss of revenue result ing from the loss of data caused by the malfunction or the repairing of a malfunction of the printer Symbols used in this manual NOTE Points giving some extended instructions or special points to pay atten tion to HINT Points that may prove useful when using the DVP P1 HELP In case a problem occurs this may help in certain situations CAUTION Points that require special attention see page xx Refer to the page indicated in brackets for detailed information e The numbers in the illustrations 2 2 etc c
8. 1 4 insert the card see page 27 5 Make an index print see page 30 e Each sheet of an index print contains up to 20 images e Once you are familiarized with the operation you can select the image to print by specifying its image number see page 36 2 English 6 index select printing see page 32 e Confirm the image number on the index print spec ify the image number with the printer and print In addition you can make ID size prints or you can make prints according to the DPOF settings And of course you can print all the data in the card or print just one image e When not using the printer remove the ink ribbon and paper and store them in the box in which they were purchased in a place protected from heat and light ID size prints DPOF printing Print all images Print one imag see page 34 see page 40 see page 38 see page 36 o E Other print settings see page 42 You can specify borderless prints date imprint and sharpness printing except for Index prints E PictBridge compliant This printer is PictBridge compliant PictBridge is a standard that enables direct printing from a digital still camera to the printer With PictBridge printing the print functions are controlled by your camera s print settings English 3 SAFETY PRECAUTIONS About the printer CAUTION E If the printer makes a strange noise emits a strange o
9. ENU button to move the menu pointer gt to the Image Num ber Press the or button to select the page to be printed e Each time the or button is pressed the page changes e To print the images on all pages select 7 e The total number of pages to be printed is indicated by Total on the LCD monitor Mode Image Number 3 Press the PRINT button The PRINT lamp lights and printing starts e During printing the remaining number of setting pages is indicated by Remains ry L Total 44 3 2 0 2 0 Remains r lt For index prints the following information can be confirmed Date that upper left image Date that lower right image was photographed was photographed SANYO 2003 06 03 2003 06 03 page O 1 Page number XXX XX XX 1 1 100 0001 100 0002 100 0003 100 0004 100 0005 L File number 100 0006 100 0007 100 0008 100 0009 100 0010 L Folder number 100 0011 100 0012 100 0013 100 0014 100 0015 In PictBridge print ing these are not printed 100 0016 100 0017 100 0018 NOTE Damaged or incompatible data e f the data for an image is damaged or if the image format is not supported by this printer a mark is printed instead of the image English 31 PRINTING INDEX SELECT PRINTS Select the desired image data from t
10. LCD monitor and the INK RIBBON indicator is lit and follow the indicated procedures to resolve the problems If two cards are inserted Remove one of the cards from the printer If the inserted card is defec tive Replace the card If the SmartMedia is inserted incorrectly Remove the card and rein sert it correctly oriented English 45 TROUBLESHOOTING Problem or indication Cause Solution Printing is not pos sible although the card is correctly inserted and the procedure was cor rectly followed is shown instead of the num ber of prints indica tion on the LCD monitor 46 English The inserted card has defec tive or has unreadable image data In this case the printer will operate differently depend ing on the selected print mode All Image print mode e When defective image data is read Pic Err is shown on the LCD monitor e The defective image is skipped and the next image is read e Defective image data is not printed Index print mode The defective image is skipped and the next image is read Defective image data is printed as a mark Images are printed except for defective image data DPOF print mode e When defective image data is read Pic Er r is shown on the LCD monitor e The defective image is skipped and the next image is read Images are printed except for defective image data The card inserted has 1981 or mor
11. PictBridge compliant Even if a non PictBridge compliant camera is connected to the printer print ing is not possible Connect the digital camera to the printer s USB terminal e Use the USB interface cable that was supplied with your digital camera CO sn O terminal 2 Turn on the power to both the printer and the digital camera F ur t r flashes on the LCD monitor e Wait until the 7 z 4 indication lights steady before proceeding to step 3 1 J gm 3 Use the digital camera to control the printing operations For detailed information about controlling the printer operations and settings from your camera please refer to the Instruction Manual that came with your digital camera Image Number lt Button operation during PictBridge printing gt e The operation buttons function as follows during PictBridge printing Pressing the CANCEL button during printing will cancel the printing operation e f the camera is set so that it is operating following the printer settings you can select the One Image ID Size or Index print mode NOTE Do not turn off the power to the printer while it is connected e f the power to the printer is turned off while it is connected the camera may not oper ate correctly If the camera does not operated correctly disconnect the dedicated USB interface cable turn off the camera and then reconnect the cable 44 English TROUBLESHOOTING I
12. SANYO DVP P1EX DVP P1U INSTRUCTION MANUAL Digital Photo Printer NOTE This manual explains how to safely operate the DVP P1EX and DVP P1U Any information regarding only one of these products will be labeled as such Please read these instructions carefully before using the printer Make sure to read and under stand the section SAFETY PRECAUTIONS on pages 4 to 11 Keep this manual in a safe place for later reference Warning TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR AMERICAN USERS e This equipment has been tested and found to comply with the limits for a Class B dig ital device pursuant to Part 15 of the FCC Rules These limits are designed to pro vide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interfer ence to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interfer ence to radio or television reception which can be determined by turning the equip ment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and
13. and printing starts Setting Borderless YV Date VISharpness J 42 English PRINTING E About date imprinting e You can select the format of the imprinted date Select the Mode menu Press the and COPIES buttons at the same time for about 2 seconds The screen to select the date format appears Press the or COPIES button e Each time the button is pressed the date format changes Specify the desired format JP Year Month Day US Month Day Year EU Day Month Year Press the MENU button e This completes the date format setting You can press the CANCEL button any time to exit the setting procedure NOTE If the date is not printed correctly e This printer imprints the date that was recorded when the image was photographed with the digital camera If an image is subsequently altered using editing software or if the data format is changed before saving the date information may be lost In some cases you may not be able to print such images or the date may be imprinted as 00 00 0000 English 43 PRINTING PRINTING FROM YOUR DIGITAL CAMERA PictBridge printing PictBridge printing allows you to print directly from your digital camera to the printer using just an USB interface cable The print settings are controlled with the digital cam era Note that PictBridge printing is possible only with digital cameras that are
14. cator tor and LCD monitor light e If the POWER button is pressed again the power turns off and the POWER indicator and ee LCD monitor turn off CO LCD monitor b POWER button CAUTION Do not turn off the printer while it is printing e f the printer is turned off while it is in the middle of printing the paper will stop moving and may cause a paper jam Turn off the printer only after printing is completed Use only the supplied AC adapter e To prevent damage to your printer do not use an AC adapter other than the one sup plied with the printer English 21 SETUP INSTALL THE INK RIBBON The ink ribbon is not supplied with this printer Please purchase a separately sold post card and ink ribbon set About the ink ribbon e When installing the ink ribbon do not touch the Ribbon ribbon If the ribbon is smudged with fingerprints or dirt the resulting print quality may be inferior e The guarantee term for the ink ribbon quality is as follows Unopened ink ribbon stored in a dark place Temperature 40 C or lower e The ink ribbon can print only the number of sheets that comes with it e The number of prints is indicated on the ink rib Number of prints indication bon How to install the ink ribbon 1 Open the ink ribbon slot cover 2 install the ink ribbon Turn the cassette spindle in the direction of the arrow to take up the ribbon slack Insert the ink ribbon into the
15. dor or if smoke comes out from it immediately turn off the power and unplug it from the power outlet e If the printer is used under these conditions it may cause a fire or electric shock Immediately turn off the printer unplug it from the power outlet and wait to make sure no more smoke comes from the printer Then take it to the dealer for service Do not try to repair or open the printer yourself E Do not modify or open the cabinet e Do not touch any internal parts as doing so may cause a fire or electric shock Any internal check setting or repair should be per formed by the dealer E Do not insert objects in the printer e Do not insert metallic or flammable objects into the ventilation holes card slots or ink ribbon slot or allow such objects to fall in It may cause a fire or electric shock Be especially careful with regard to this point when children are present e In the event that an object was inserted in or has fallen into the printer turn off the printer unplug it from the power outlet and contact the dealer If the printer is operated as is it may cause a fire or electric shock 4 English E Do not place flower vases or other containers holding liquids on top of the printer e In the event that water or other liquid has gotten inside the printer immediately turn off the printer unplug it from the power outlet and contact the dealer If the printer is operated as is it may cause a fir
16. e Make the image resolution lower or the compression ratio higher e Use the specified paper In very rare cases you may not be able to print an image even though it con forms to the DCF standard or the printing may be dis torted The images were edited on a computer The image printed has a reso lution is 320 x 240 pixels or less The ink ribbon is depleted e Change the conditions when photographing e Select borderless printing see page 42 Not a malfunction The dates of images that were edited on a computer are not recog nized Not a malfunction Images having a resolution of 320 x 240 pixels or less are printed without being enlarged In addition they cannot be printed as borderless prints Install a new ink ribbon and press the PRINT button to resume printing English 47 APPENDIX SPECIFICATIONS Printer Printing system Dye sublimation printer Resolutions 310 dpi Paper size 100 mm x 148 mm about 4 x 6 True borderless Paper feed Automatic feeding from paper cassette Paper cassette Maximum 50 sheets Printing time About 40 seconds page for borderless prints excluding image processing time except for index prints and ID size prints Ink Ribbon cartridge Print up to 100 sheets when using DVP IPK100 U Gradations 8 bit color LED indications Power MEMORY CARD INK RIBBON PRINT Card slot CF ty
17. e images recorded There is no recorded image data on the card The card was recorded using a camera that does not conform to the DCF standard Not a malfunction Use a card that works properly take the photos again and print them e Do not record more than 1980 images on one card e Insert a card in which image data has been recorded e Insert a card that was recorded using a camera that conforms to the DCF standard Problem or indication Cause TROUBLESHOOTING Solution A TIFF image can not be printed The printing speed is slow The print is blurred or smudged The images in the index print are not in order by date The printed image is small The paper supply was depleted and more paper was inserted in the paper tray but print ing does not resume e The image is a 16 bit TIFF image that was saved using a computer s image pro cessing application This printer cannot recog nize TIFF images that do not conform to the DCF standard The amount of image data is large The higher the resolution and the lower the compres sion ratio the more beauti ful the prints that can be produced However when the amount of image data is large it takes more time to read and the start of print ing is delayed The paper used is not the specified paper There is a paper jam e When saving a TIFF image on your computer specify an 8 bit TIFF file
18. e or electric shock Do not get the printer wet e Take care not to let the printer get wet or allow water to get inside as this may case a fire or electric shock E Do not use during a storm e To avoid the risk of electric shock quickly turn off the printer and unplug the power cord from the power out let E Do not place on an unstable surface e The printer may fall resulting in damage to the printer or injury e If the printer has fallen and its body is damaged turn it off unplug the power cord from the power outlet and take it to the dealer for repair Using the printer after its body has been damaged may cause a fire or electric shock English 5 CAUTION E Do not stand the printer on its side e The printer should be in its correct horizontal position when in use e If the printer is operated while set on its side the paper feed and or discharge may not work properly and cause a malfunction E Do not use where there is risk of explosion e Do not use the printer in a location where there is explosive gas or any other flammable material in the air Doing so may cause a fire or an explosion Cautions when carrying the printer e Be careful not to drop the printer or subject it to strong shock or vibration e Unplug the power cord from the power outlet and dis connect any other equipment from the printer E If the printer is not going to be used for a long period of time e For safe
19. erate when the internal tem perature rises to a certain temperature When this happens the noise of the cooling fan can be heard but this is normal e During printing if the inside of the printer exceeds a specific temperature printing may stop temporarily Printing will automatically resume after the temperature drops When printing stops due to elevated temperature the HEAT indication will appear on the LCD monitor and the PRINT indicator will flash If this should occur please wait for a while for printing to resume English 19 OUTLINE LCD panel display Mode Image Number Setting All the indications never appear at the same time Mode menu Print page number Index display Setting menu Total number of prints during printing shows remaining number of prints Specified number of prints Image number 20 English SETUP POWER CONNECTION Connect the AC adapter Connect the supplied AC adapter to the printer Make sure that all the power cord and AC adapter plugs are firmly inserted 1 Insert the power cord plug into the AC adapt er socket 2 Connect the other end of the power cord plug to a power outlet 3 Insert the AC adapter plug L type in the DC IN terminal of the printer Turn on the power 1 Press the POWER button The printer turns on and the POWER indica Power indi
20. f malfunction occurs first check the troubleshooting procedures given below Problem or indication Cause TROUBLESHOOTING Solution 7 is shown on the LCD monitor and the PAPER indicator is lit or flashing rs is shown on the LCD monitor and the INK RIB BON indicator is lit is shown on the LCD monitor the PAPER indica tor is lit or flashing and the INK RIB BON indicator is lit The card image s can t be read and the MEMORY CARD indicator is lit red or orange The paper tray is empty The PAPER indicator is lit Paper jam in the printer The PAPER indicator flashes The ink ribbon is depleted The paper tray is empty or there is a paper jam in the printer and the ink ribbon is depleted More than one card is inserted in the printer The MEMORY CARD indicator is lit orange The inserted card is defective The MEMORY CARD indicator is lit red The SmartMedia is inserted incorrectly The MEMORY CARD indication is lit red When the paper tray is empty Remove the paper tray and load the paper Reinsert the loaded paper tray in the printer e When the PRINT button is pressed printing resumes Remove the ink ribbon Install a new ink ribbon e When the PRINT button is pressed printing resumes Refer to the paragraphs above on is shown on the LCD monitor and the PAPER indicator is lit or flashing and 7 is shown on the
21. hat may cause a fire e The supplied AC adapter is for exclusive use with this printer Do not use it with other devices as doing so may cause a fire or electric shock CAUTION E When unplugging the power cord be sure to hold the power plug and slowly pull it out of the power outlet e Pulling the cord portion may damage the power cord T and cause a fire or electric shock yt E Do not touch the power cord plug with wet hands or you risk receiving an electric shock 10 English CAUTION Other items Caution concerning the card e The card may be warm immediately after use Before removing the card turn off the power to the printer and wait for it to cool down Keep out of the reach of children If the card is inserted incorrectly it may cause an accident to occur English 11 FOR CORRECT USE OF YOUR PRINTER E Maintenance e Cleaning Turn off the power and remove the power plug from the power outlet Use a soft cloth to gently wipe the printer clean To remove stains Moisten a cloth with a solution of water and a mild detergent Wring the cloth out well before using it to wipe the printer Follow by polishing with a soft dry cloth Remove any dust from the ventilation holes on the front panel e Dust entering the printer from the ventilation holes will adhere to the prints and diminish their quality e Caution Never use benzine or thinner to clean the printer as do
22. he index images on the LCD monitor and print them You can select several images and specify the number of prints for each image 1 Setthe printer to the Index Select print mode see page 29 e The print page as well as the index image and folder number are shown on the LCD monitor Mode Index Select Image Number Image 117 4 Dar S Number LILILI I Page D er Print page Index images Setting v Borderless y Date Sharpness HINT How to use the index prints e The printed images on the index print see page 30 correspond to the index images Having the index print to refer to makes it easier to select the images you want to print 32 English PRINTING 2 Specify the image to print and the num ber of prints Press the MENU button and move the menu pointer gt to Image Number Press the or button to select the image to print e When or is pressed the Index Navi um moves Use the Index Navi to specify the image you wish to print e If you press the and COPIES buttons at the same time for about 2 seconds the number of prints speci fied in step 3 is applied to all the images Press the or COPIES button to number specify the number of prints The number of prints for the currently selected image Quantity and the Total Mode Da Ju l If OG ME total
23. ing so may cause deforma tion or paint peeling Also before using a chemically treated dustcloth to clean the printer make sure to read all accompanying instructions e Do not allow pesticides or flammable substances to come into contact with the printer or paper tray Also do not allow rubber or vinyl objects to contact the printer for a long period They may cause deformation discoloration or paint peeling E When not using the printer for a long period Remove the power cord However when the power is interrupted for a long time the printer functions may begin to not work properly Periodically turn on the printer and use it to maintain the functions E Caution concerning condensation Using the printer or card with condensation inside it may damage it e If condensation seems likely to form e Place the printer in a plastic bag and seal it and then wait until the printer has reached the ambient temperature e Be careful of condensation under the following conditions e When moving the printer suddenly from a cold place to a warm place e When the ambient temperature changes drastically such as when a heater is turned on to quickly heat the room When the printer is placed in the path of cool air from an air conditioner e When the printer is placed in a location of high humidity 12 English E Caution concerning undesired interference The printer may create undesired interference if used close to a television or radio To av
24. ink ribbon slot from the direction indicated by the arrow e Firmly push it all the way in 3 Close the ink ribbon slot cover CAUTION When printing is finished e Be sure to remove the ink ribbon from the printer 22 English How to remove the ink ribbon 1 Open the ink ribbon slot cover 2 Remove the ink ribbon Lift the lock lever Lift out the ink ribbon CAUTION Cautions when replacing the ink ribbon e Do not insert fingers into the ink ribbon slot Immediately after printing the inside of the printer is very hot If fingers etc are inserted into the ink ribbon slot they may get burned e When removing the ink ribbon take care not damage the ribbon by touching it Do not rewind the ink ribbon e Once used the ink ribbon cannot be used again even if it is rewound English 23 SETUP LOADING THE PAPER The paper and ink ribbon are not supplied with this printer Please purchase the sepa rately sold postcard paper and ink ribbon set About the paper e This printer can print only the exclusive postcard paper Using paper other than that specified may cause paper jams Also you will not be able to obtain the best prints e The ink ribbon can print only the number of sheets that comes with it When loading the paper take care to load it correctly oriented and with the print surface facing down Once a paper is printed do not reinsert it in the printer as doing so may result in damage
25. number of prints e The total number of prints Total is shown on the LCD monitor A maximum of 19 prints can be speci fied 3 Press the PRINT button e The PRINT indicator lights and printing begins During printing the remaining number of yiimage prints Remains is shown Mode Setting NOTE You can specify borderless prints date imprint and sharpness printing see page 42 English 37 PRINTING PRINT ALL IMAGES You can print all the images on the card 1 Setthe printer to the All Image print mode see page 29 e The image number and total number of images Total is shown on the LCD moni tor Mode Image I Number Image Number Total number of images Setting v Borderless v Date Sharpness 38 English PRINTING 2 Press the PRINT button e The PRINT indicator lights and printing begins e During printing the remaining number of prints Remains is shown Remaining number of prints v Borderless V Date Sharpness NOTE If the total number of prints indication appears as e The indication for the total number of prints cannot show more than 99 However when the remaining number of prints becomes 99 the correct number is shown on the display You can customize the setting You can specify borderless prints date imprint and sharpness printing see page 42 English 39 PRINTING DPOF PRINTING
26. oid this type of interference make sure the cores on the supplied power cord and AC adapter are not removed Ace Core E Core Power cord AC adapter E About the ink ribbon e Use only the specified ink ribbon If the ribbon in the ink ribbon is slack turn the spindle in the direction indicated by the arrow to make it taut before using Keep unused ink ribbon in the package Do not subject it to direct sunlight or high temperatures or humidity Do not touch or pull the ribbon Doing so may cause the print quality to deteriorate E About the paper e Use only paper specified for the printer e Hold the paper by the edges and avoid touching the print surface If the print sur face is scratched or smudged the print quality may deteriorate e Once a paper is printed do not reinsert it in the printer as doing so may result in damage Do not use paper with bent edges or wrinkled paper If there is a curl to the paper take measures to flatten it before using it in the printer Keep unused paper in the package Do not subject it to direct sunlight or high tem peratures or humidity Keep it flat to prevent folds or wrinkles E About the printing surface e Water based inks paint stick ink jet printing will not adhere to the printing sur face Please use a ball point pen or permanent marker English 13 E About prints e Keep prints in a place that is not subject to direct sunlight or high temperatu
27. orrespond to the numbered steps in the procedures CONTENTS BASIC OPERATION uses ent oars 2 SAFETY PRECAUTIONS Se 4 FOR CORRECT USE OF YOUR PRINTER esssssessssssessssstsssssessssssessssssesssssseessn 12 CHECKING THE INCLUDED ACCESSORIES o ccsssssssssssssssssssessssssessssessssssessen 15 SEPARATELY SOLD ACCESSORIES o cssssssssssssesssssessssssessssssesssssesssssseesssseesssaes 16 OUTLINE SPECIAL FEATURES OF THE PRINTER o ssssssssssssssssesssssesssssessssssesssssstsssssseessn 17 PART NAMES sn re 18 SETUP POWER CONNECTION M 21 INSTALL THE INK RIBBON sn ae ates elect cts needles 22 LOADING THE PAPER it demens eteren 24 NETTENE 27 PRINTING SETTING THE PRINT MODE o cccsssscsssssssssssssessssssesssssessssssesssssesssssseesssneesssseeesssees 29 NDEXPANI SD dts aaa a lace ice catia 30 INDEX SELECT PRINTS umettede badekar ttonataae 32 ID SIZE PRINTS Te tle titel de 34 PRINT ONE IMAGE ee bb cy tea 36 PRINT ALISIMAGES 220 teeth ree oo oe ae ee kaos 38 re GN 40 OTHER PRINT SETTINGS 1 een sbede 42 PRINTING FROM YOUR DIGITAL CAMERA PictBridge printing 44 TROUBLESHOOTING SPIO UIE ES TANG seanser 45 APPENDIX FT 48 English 1 BASIC OPERATION Basic printing procedure 1 Install the ink ribbon see page 22 e The ink ribbon and paper are not supplied with this printer Please purchase them separately see page 16 2 Load the paper see page 24 3 Connect the AC adapter and turn on the power see page 2
28. ot touch the paper tray until printing is finished Do not remove the paper tray and put your fingers or hands in the paper tray slot J E Do not insert your fingers in the printer Your fingers may be pinched or burned Be especially careful with regard to this point when children are present 8 English About the AC adapter CAUTION E Make sure the rated voltage of AC adapter matches the line voltage in your area e Fire and or electrocution could result from connecting the AC adapter to a line voltage other than that for which it is rated DVP P1EX 220V to 240V DVP P1U 100V to 120V E Do not damage the power cord e Do not put heavy objects on the power cord or place heat producing appliances near it Do not bend or modify the power cord or use staples to affix it as doing so may damage the power cord and cause a fire or electric shock e If the power cord is damaged consult with your dealer about obtaining a replacement cord E When moving the printer disconnect the AC adapter e If you attempt to move the printer without disconnecting the AC adapter the AC adapter or power cord may be damaged E Do not allow dust etc to build up on the power cord or power outlet e A build up of dust may cause a short circuit or generate heat and cause a fire e Take special care when the printer is used in a humid room in a place where vapors are readily condensed in the ki
29. pe I II SmartMedia 3 3V SD Card Memory Stick Image format JPEG TIFF format DCF DPOF Exif 1 0 2 2 compli ant Note Designed mainly by the Japan Electronics and Informa tion Technology Industries Association JEITA DCF Design rules for camera file system is standard for dig ital still camera image files to provide interoperability between digital photography devices for the images stored on removable memory cards However rt is not guaranteed that all devices will support the DCF stan dard Image size Maximum 12 000 000 pixels Maximum 10 000 000 pixels for TIFF Print mode Index Index select One All DPOF PictBridge ID photo Print option Borderless on off Date on off sharpness on off Paper feed Automatic paper feed maximum 50 sheets Ambient Temperature 10 to 35 C operating environment 10 to 55 C storage recom Humidity 35 to 80 operating no condensation mended 10 to 90 storage no condensation Power supply AC adapter AC100 120V DVP P1U AC220 240V DVP P1EX DC in DC 24V Power consumption 82 W Weight 2 2 Kg Dimensions W x H x D 189 x 192 x 162 mm Even if an image format complies with the DCF standard complete compatibility is not guaranteed 48 English APPENDIX AC adapter specifications Power supply DVP P1EX VAR P1EX AC220V 240V 50 60Hz 0 45A DVP P1U VAR P1 AC100V 120V 50 60Hz 0 85A Rated power DC24V 3A Opera
30. res or humidity It is best to keep prints in an album or card case or other air tight place e If keeping prints in an album choose nylon photo covers Polypropylene or cello phane can also be used Photo covers other than these may cause discoloration or color transfer e Do not let cellophane tape or plastic erasers etc contact the print surface for a long period They may cause discoloration E About thermal head replacement e When the thermal head is worn out the print quality deteriorates The thermal head is a consumable item When the print quality deteriorates replace the ther mal head e For replacement of the thermal head please consult with the store where you pur chased the printer It is recommended that you request a checkup of the printeris precision parts at the same time Caution concerning copyrights e The images you print are for your own private use any other use may violate the rights of copyrights owners 14 English CHECKING THE INCLUDED ACCESSORIES e Paper tray AC adapter and power cord e Paper stopper If necessary attach this accessory to prevent the discharged prints from dropping English 15 SEPARATELY SOLD ACCESSORIES Postcard paper and ink ribbon sets e Postcard paper and ink ribbon set 50 sheets A set of 50 postcards and one ink ribbon product number DVP P1EX DVP IPK50 DVP P1U DVP IPK50U e Postcard paper and ink ribbon set 100 sheets A set of 100 pos
31. s of memory cards e Prints can be made directly from many of the various types of digital camera memory cards simply by inserting the card into the printer e This printer is compatible with the following cards e SD Memory Card e MultiMedia Card e CompactFlash e Microdrive e SmartMedia 3 3V e Memory Stick An adapter is required to use Memory Stick Duo Direct prints from your digital camera PictBridge e Any digital camera that supports PictBridge can be connected to the printer for direct printing without a PC Using this function the print functions are controlled by your camera s print settings English 17 OUTLINE PART NAMES Front e INK RIBBON PAPER MEMORY CARD Paper eject section Slot B LCD monitor PictBridge terminal INK RIBBON indicator COPIES button PAPER indicator COPIES button MEMORY CARD indicator Paper tray slot cover CANCEL button Paper tray slot PRINT indicator Ventilation holes PRINT button button POWER indicator button POWER button MENU button SlotA Ink ribbon slot cover Card slot cover Ink ribbon slot 18 English OUTLINE Rear Ventilation holes cooling fan DC IN terminal DC24V G Connect the supplied AC adapter About temperature elevation and cooling fan operation e The cooling fan in the printer will automatically start to op
32. tcards and one ink ribbon product number DVP P1EX DVP IPK100 DVP P1U DVP IPK100U NOTE About the ink ribbon life e The ink ribbon that comes in a set can be used only for the number of sheets that comes in the set It cannot be used to print more than the specified number 16 English OUTLINE SPECIAL FEATURES OF THE PRINTER This printer is designed to print pictures taken with a digital camera combining beautiful print results with easy to use operation It also incorporates various useful functions for printing images on postcards and L size paper Beautiful and durable prints e The dye sublimation printer uses an exclusive ink ribbon to produce beautiful prints that are highly resistant to UV light The fade resistance is equal to that of standard lab processed photo prints e The exclusive print paper is water resistant Keep your prints clean by immediately and gently blotting any drops of water with a soft cloth and they will not be damaged e Postcards made exclusively for this printer are sold separately In addition to standard options such as date imprinting and borderless printing with this printer you can specify extra sharp images The preservation of prints which have been saturated in water cannot be guaranteed DPOF compliant e You can have your prints produced following the printing specifications number of prints date imprinting index print set within your digital camera Print from various type
33. tchen or in a place where dust easily accumu lates Periodically unplug the power cord from the power out let and remove any dust or dirt adhering between the prongs E Do not wrap the AC adapter in cloth or the like e f the AC adapter is wrapped in cloth the resulting heat generated may cause a fire Even when the printer is not being operated the AC adapter generates some heat For this reason once the printer is set up it should never be covered with a cloth or the like English 9 CAUTION Caution when connecting the AC adapter e Securely plug the power cord all the way into the power outlet If the power cord is not fully plugged in heat may be generated and cause a fire e Do not use a bundled power cord as the heat gener ated may cause a fire e When using an extension cord make sure that the total wattage of the connected devices does not exceed the rated value of the extension cord If the power load exceeds the rated value it may cause a fire Before using an extension cord with the printer make sure to read all its accompanying instructions e Do not leave the supplied AC adapters power cord plugged into the power outlet while the other end is not plugged into the printer s power socket The loose end can cause electrocution if touched with wet hands or if handled by children e Use only the supplied power cord If a different power cord is used it may be rated for a different current load and t
34. til the desired print mode appears in the Mode menu on the LCD monitor index index print e Prints 20 small images on each sheet Index Select index select e Prints only the image s selected on the eye Index Select one index display on LCD monitor One pr Fa je DROF ID Size ID size Prints 6 ID size images on each sheet One Image Single image e Prints only the selected image e oo Se CI All Image all images e Prints all images prof DPOF e Prints images as specified by the DPOF settings index print date imprint number of prints Menu a English 29 PRINTING INDEX PRINTS A print that shows thumbnail versions of the images up to 20 per sheet is called an index print When a memory card contains a lot of image data this print mode can be very useful for cataloguing the many images 1 Setthe printer to the Index print mode see page 29 e The print page and index images are shown on the LCD monitor Mode Image Number Print page Index images Setting 30 English PRINTING 2 Select the page to be printed You can select whether to print the images on the selected page or print the images on all pages Press the M
35. ting environment 0 C 40 C Storage environment 20 C 85 C Dimensions and Weight W x H x D 72 x 36 x 150 mm excluding protrusions 450g excluding power cord Power cord speci fications Rated DVP P1EX VAR P1EX AC250V 2 5A DVP P1U VAR P1 AC125V 10A e When using the AC adapter abroad the power cord may need to be replaced in accor dance with local requirements Paper tray specifications Size 100 mm x 148 mm about 4 x 6 Postcard size Capacity 50 sheets max Postcard paper and ink ribbon specifications DVP IPK50 U Paper 50 postcards Ink ribbon For printing 50 postcards DVP IPK100 U Paper 100 postcards Ink ribbon For printing 100 postcards Storage conditions Temperature Less than 40 C DVP IPK50 U DVP IPK100 U English 49 SANYO SANYO Electric Co Ltd 1AG6P1P1621 SVFO1 EX U 0703CR CA Printed in China Printed on recycled paper
36. tting Sharpness 34 English PRINTING 2 Specify the image you wish to print and the number of prints Press the MENU button and move the menu pointer gt to Image Number Press the or button to display the number of the image you wish to print Press the or COPIES button to specify the number of prints e The total number of prints Total is shown on the LCD monitor A maximum of 19 prints can be speci fied 3 Press the PRINT button Mode e The PRINT indicator lights and printing aa begins Number Line e During printing the remaining number of oust prints Remains is shown L Total Setting Sharpness 2 Number of prints 2 Total number of prints NOTE You can specify sharpness printing see page 42 English 35 PRINTING PRINT ONE IMAGE The data for one image can be printed on one sheet or you can make multiple prints 1 Setthe printer to the One Image print mode see page 29 e The image number is shown on the LCD monitor Mode Image C10ne Image Number Image _ 117171 Varai 4 Number EE EK JE Setting v Borderless v Date Sharpness 36 English PRINTING 2 Specify the image to print and the num ber of prints Press the MENU button to move the menu pointer gt to Image Number Press the or button to select the image to print Press the or COPIES button to specify the
37. ty s sake unplug the power cord from the power outlet and remove the ink ribbon and paper from the printer 6 English CAUTION Cautions during use and storage e This printer is a precision instrument When using or storing the printer make sure to avoid the following locations to avoid damage e Places in direct sunlight Places where humidity and temperature are high e Places that may get wet e Places close to an air conditioner or heater Inside a car e Places where there is dust and dirt e Places where there is a fire burning e Places where volatile products are stored e Places subject to vibration Operating environment e For details about the optimum operating environment please see Specifications on page 48 E Do not obstruct the ventilation holes e Do not obstruct the ventilation holes for example by placing the printer in a spot with poor ventilation or covering it with a table cloth If the ventilation holes are blocked the inside of the printer may become over heated and cause a fire E Do not place heavy objects on top of the printer e The printer may topple over and fall possibly causing injury In addition a heavy object on the printer may damage it English 7 CAUTION E Do not remove the paper tray during printing e During printing the paper is moving back and forth within the printer If you attempt to touch the paper it may result in injury Do n
Download Pdf Manuals
Related Search