Samsung SFT-202 User's Manual
Contents
1. The following options are available TV Type Select between a standard aspect ratio TV 4 3 or Wide screen 16 9 TV 16 9 mode is only active when a programme is transmitted in 16 9 format With a modern 16 9 TV the switch to 16 9 mode is automatic if connected via a full SCART With a modern 4 3 TV 16 9 mode will produce a Letter Box format if connected via a full SCART UHF Channel Use this option to change the TV UHF modulator output channel The default channel is CH38 If this is already occupied by a local TV channel VCR or you are experiencing picture interference use this option to re tune your satellite receiver to a different UHF channel Remember to re tune your TV and VCR to the new channel Enable TV SCART RGB When OFF the TV SCART outputs composite video signal If you have a RGB compatible TV switch this option to ON to enjoy better picture quality Enable TV SCART S Video Select this option only if your TV is S Video compatible Note 1 If your TV is not compatible a Black and White picture will result 2 This option is NOT available if TV SCART is set to RGB Enable VCR SCART S Video Select this option only if your VCR is S Video compatible Note 1 If your VCR is not compatible a Black and White picture will result 2 This option is NOT available if TV SCART is set to RGB 23 Preferences This menu allows you to customise the receiver to suit your individual needs To access the Pre2. 2z Using the Favourite Channels List You may add all your favourite TV and Radio channels into the Favourite Channels List Please see next section on instructions for using and editing favourite channels Multi satellite As you download channels from different satellites your digital satellite receiver will store in dedicated satellite groups For more details please refer to the Advanced User Guide List by satellite Astra 19 2E To access your channels press the TV or Radio key l i 3 conn Use AV to change To access the list of channels on a different satellite ATNT page press F1 or F2 keys Within each list you may use 5 CNBC Use lt qp to move the Up Down Left Right keys to highlight the required STARI cursor channel and press OK to select it 8 VH 1 Use OK to select Press ESC to exit List in Alphabetical order Alternatively from View mode you can list all the stored channels in alphabetical order by pressing TV or Radio twice in succession EEI Canal 2 Use the Up Down Left Right keys to highlight the channels and press OK to select it In alpha mode Fashion you can also use the F1 F2 keys to skip to the next K1 letter to save time K2 K3 Note At any time if you wish to return to your original cursor position simply press the HELP key on your remote Favourite Channels Before you can use the Favourite Channels List you must first add your favourite channels into the favourite
3. Movie Chaenel 13 00 1430 Midnight express Note If the receiver was previously working on a channel and the No Signal icon appears you may have one of the following problems Signal degraded heavily by poor weather Channel no longer broadcasting and no carrier was detected Dish not aligned to the correct satellite Use INFO key for diagnostic info LNB power switched off in the menu Faulty cable or LNB The Signal and Data level meter Press the Signal key during view mode to display the signal and data level for the current channel Use this feature to assist dish alignment or fault finding should there be a reception problem Pic Size 544x576 Diagnostic Information Frames Sec 25 00 For more information on the receiving signal Asp fatio 4 3 press the INFO key to display the diagnostic Biosoc Lars Screen The diagnostic screen displays detailed broadcast neti Stereo Emphasis Off information in real time Press INFO key again to Sample Rate 48 00kHz return to the signal meters or ESC to return to Picture Memory Status At any time you can check the memory status on you receiver The indicator shows the amount of receiver memory used by the stored channels Press All channels are stored in memory Menu Channel Setup Memory Status Memory Used Parental Control To restrict unauthorised access to your receiver two types of parental lock are provided Channel Lock This provide
4. Universal LNB supported Software controlled on off 0 12V accessory switch Demodulator and FEC Demodulator Type Filtering Input symbol rate Forward Error Correction Code rates supported 27 Software controlled on off Fully DVB compliant QPSK 0 2 or 0 35 Square root raised cosine 2 Msps to 45 Msps fully variable 1 2 2 3 3 4 5 6 7 8 Auto Sensed Transport A V Decoding Demultiplexor PID Filters PCR recovery Video Decoder Bitstreams Supported Video Resolution Video Memory Audio Decoder Type Layers Audio Modes Output Sample Rates Supported Data rates supported PAL NTSC Encoder Supported Outputs UHF VHF Modulator Tuning Range UHF or VHF Processor and memory System CPU RAM ROM EEPROM Power consumption Operational 1 Video 1 Audio 30 general purpose SI capable internal 27MHz PLL locked to PCR MPEG2 MP ML to ISO IEC 13818 2 MPEG1 to ISO IEC 11172 2 Up to 720 x 576 pixels at 25 fos for PAL Up to 720 x 480 pixels at 30 fps for NTSC 16Mbit MPEG1 land Il Mono Dual Stereo Joint Stereo 16kHz 22 05kHz 24kHz 32kHz 44 1kHz 48kHz 8 to 448 Kbps Composite RGB S Video NTSC M PAL B D G H I M N Nc country dependent CH21 to CH69 CHS 4 country dependent 40 MIPS Cached 512k standard 1MB standard 256kBit 30W max 28
5. decimal or hexadecimal form Use the F1 F2 and 0 9 keys to enter the PID values When you have finished and are ready to store and display that channel press OK OarRwry Note In order for manual tuning to be successful the PCR PID must be entered In many cases the PCR PID is not published Fortunately in nearly all cases the PCR is the same as the Video PID or the Audio PID or 8190 in decimal or 1FFE in hexadecimal The Teletext PID is optional and can be ignored when the value is unknown Setup Satellite If your desired satellite position is not on the Preset List you can manually edit an existing satellite or add a new satellite name to the preset list To add a new satellite to your list you must first enter the channel tuning mode Press Menu Channel Setup OK From the Channel tuning menu press F1 to enter manual tuner mode You will now see a Setup Satellite button on the right hand side Highlight the Setup Satellite button press OK You will now see the Setup Satellite menu In the Setup Satellite menu you may either press F1 to edit the highlighted satellite details or you may press F2 to add your own satellite to the listing In either case you will then be required to enter the new parameters in the boxes provided Satellite Enter the satellite name Position Enter the satellite position in degrees then the decimal place and either E or W East or West Press OK when finished Your new
6. guide the receiver to tune to other Networks Network tuning enables the receiver to download other channels from the same network Use Bouquet tuning you only want to download channels from one channel frequency group Bouquet Tuning is used when only the channels from the desired frequency are to be downloaded PID tuning Apart from the usual channel parameters Frequency or Sra Symbol Rate Polarity and FEC value the broadcaster name must include additional information known as Packet Identifiers or PIDs in their transmission to allow auto Ch type FR Uue PID 0000 PID 0000 PID 0000 tuning to work properly PIDs in Hex Dec In PID Tuning you are required to enter the channel name and three other parameters Video PID Audio PID PCR PID and Text PID optional These values can either be in Decimal ranging from 0 to 9 or Hexadecimal ranging from 0 to 9 and A to F for each digit After selecting from the Preset List or Manually entering the basic channel parameters Frequency Symbol Rate Polarity and FEC value move the cursor to highlight the Manual button and press OK to start tuning Edit the Channel details by following the steps below Use the UP DOWN LEFT RIGHT keys to move the cursor from one field to another Use the LEFT RIGHT F1 and F2 keys to enter the channel name Select the channel type whether it is a TV channel or a Radio channel Decide whether you would like to enter the PIDs in
7. in menu Display modes The current viewing mode is displayed by your receiver Mode Menu info bar Front panel LED display TV TV icon Channel No Channel Number Radio Radio icon Channel No r Channel No Favourites Heart icon Channel No F Channel No Rear Panel rann 2 DAAA CE aa n uam Please refer to the diagram above for all the connection possibilities of your receiver Do not connect the unit to the mains socket until all other connections have been made and checked IF Input Connect the cable from your dish to this connector Loop Out If you have a second satellite receiver connect the second satellite receiver s LNB input to this connector TV Connect your TV UHF input to this connector ANT Connect your TV antenna to this connector only in conjunction with TV UHF output TV SCART Use this connector to connect you TV to the receiver via a SCART cable VCR SCART Use this connector to connect you VCR to the receiver via a SCART cable Video Composite video output for connecting to a monitor etc 0 12V 0 or 12V output for external control switch Audio L R Audio outputs for connecting to an external stereo amplifier S Video Out Additional output for recording with a VCR camcorder with S ideo capability RS232 You can connect the receiver to a PC via this connector advanced users only IEEE 1284 High speed data port for connecting with a PC advance users only Once ALL the connections are
8. made and CHECKED you may connect the unit to the main supply Remote Control Unit To switch to the second By Pass SCART priority Soundtrack language VCR loop through Display radio channel list To display channel status or current or next channel information in EPG mode Display TV channel list To switch your receiver on from stand by or off to stand by To change volume or to move cursor left right in menu To mute the sound To change channels in view mode or to move cursor up or down in menu mode To about setting or to back out oi of menu Numeric Keys Used to select channels or enter programming eee rs To select menu option or to updated on entry SIGNAL F1 HELP F2 OQQO Programme Guide To display the current and next programme information if available A To edit or display the Favourite channels list Toggle signal meter Function keys In normal viewing mode F1 may be used to recall the last viewed channel To Display the on line help messages when available Additional functions will be indicated in menus where applicable Quick Start After initialisation the Language selection screen will be displayed By using the LEFT RIGHT keys you may select the different menu languages available Once you have Select Menu Languade English selected the desired menu language press OK to continue with set up After selecting the menu language the re
9. satellite will be added to the Manual list on the screen Highlight the new satellite in the list and press OK to return to the Channel tuning menu You will find your new satellite displayed in the Satellite box Enter the transponder parameters and check for signal availability Commence downloading your new channels Now any manual channels downloaded under these parameters will be listed under the satellite name you have entered Note In the Manual Tuning Menu you can use the F2 key to toggle between the receiver s preset satellite list and the manually added satellite list LNB AI Preset Setup Satellite Satellite Frequence Sym Rate Polarity FEC signar i vata FIA on Auto Network Bouquet PIDs use ae To cnange satellite r manuali moge LNB tok Preset Setup Satellite Satellite Frequence Sym Rate 11720 Polarity 27500 FEC Hor 18v 3 4 Digna vaa FIA un Auto Network Bouquet PIDs Use lt gt to change satellite F1 Manual Fz mode Satellite Position 1238 E TV Radio Number of services asua Sirius 1 2 F1 Edi deeails Editing channels Should you wish to modify or view details of a particular channel you may do so by using the Edit Channel Details menu Please note that apart from editing the channel name editing any of the channel parameters will cause the channel to either be lost or changed different audio video This menu is best used for
10. ED this normally indicates that either your dish LNB set up is not adequate for this satellite or your dish is not correctly aligned The second bar shows the quality of the DATA received This GREEN bar indicates the DATA INTEGRITY of the signal received If the bar is RED this indicates that the DATA received is unreliable This could cause the picture to break up or disappear completely Note If No signal found is displayed check that the values entered are correct and are valid for the satellite your dish is installed for Please also refer to the Advanced Users and Trouble Shooting section to check that your LNB settings are correct Manual Entry see also Advanced User Guide See the Advanced User Guide section for more information on manual entry and other tuning options other than Auto set up Downloading Channels With a Signal Found message displayed the signal meters in the Channel Tuning Menu and depending on whether you have selected a Satellite or Bouquet search Press the OK key to begin auto search Satellite Network or Bouquet Auto Channel Search Astra 19 2E L as TV channels co P channels Sky 1 BBC1 CNN Virgin Radio NBC ITN Movies 1 Sky news Searching 11 381 GHz The AUTO CHANNEL SEARCH screen will now be displayed Please wait for the receiver to process all the channels this may take a few minutes The time required to tune in all the channe
11. SAMSUNG SFT 202 Digital Satellite Receiver Instruction manual Table of Contents 1 Safety and precautions 2 Accessories 3 System Connection 4 Front Panel 5 Rear Panel 6 Remote Control Unit 7 Quick Start 8 Downloading Channels 9 Viewing your channels 10 Multi satellite 11 Favourite Channels 12 Electronic Programme Guide EPG 13 Selecting different audio channels 14 Additional Information 15 Parental Control 16 Parental Lock 17 Advanced users guide 18 Tuning Modes 19 Setup Satellite 20 Editing Channels 21 Arrange 22 Sort Free to Air Channels 23 Deleting Channels 24 Installation LNB TV VCR settings Preferences Set local time System Information 25 Reset to factory defaults 26 Trouble shooting 27 Technical Specifications NXYSSSSYSRRGHIILSSSCPCVOAKOEN 25 26 27 Safety and Precautions Thank you for purchasing the new SAMSUNG digital satellite receiver For your safety and proper operation of your receiver please take time reading this manual fully before installing and operating the receiver Safety notice DANGER HIGH VOLTAGE RISK OF ELECTRIC SHOCK Lethal voltages are present inside the unit Always unplug the receiver completely from mains outlet before connecting or disconnecting anything No user serviceable parts inside Please refer all servicing to qualified service agents Never expose the unit to water moisture extreme cold or direct sunlight Slots are provided fo
12. ange select channel Repeat for all other channels or press ESC again to store the new settings and plead oK Return to the previous menu Discovery Kiosk 2 Sort Free to Air Channels This function automatically separates the scrambled channels from the free to air channels by actually checking each channel for video and audio The user first decides whether to sort TV or Radio channels or both at the same time and then selects whether to delete the scrambled channels or simply move them to the end of the channel list Depending on the number of channels to be sorted the time taken to complete the process will vary and the progress bar will indicate progress in percentage To change the mode of operation use the Left Right or OK key Use F1 key to start the sorting progress and ESC to abort The Sort Unscrambled Channels Menu Mode Mode Move to end of list Select either to delete all scrambled channels Scope or move all scrambled channels to the end of TV Ghannets the channel list Channel PPV Movie Progress Scope Select sort TV channels only Radio channels only or sort both at the same time RAISES EEEE Press F1 to proceed ESC to abort Channel Displays the current channel being checked Progress Displays the sorting progress in percentage Available Unavailable Displays a visual ratio between free channels to scrambled channels N B Please note that channels with no signal lock wi
13. ceiver will display the Channel Tuning Menu Menu Channel Setup OK LNB Al Preset Setup Satellite Preset Entry Satellite Frequency Move the cursor to highlight the Satellite box and Sym Rate use the LEFT RIGHT keys to scroll through the pre Fotarity stored satellites For example if your dish is aimed FEG at the Astra satellite when Astra is selected you should see both signal meters reading a good signal Snaigl Found aigna level The receiver will then prompt you to press OK OO to start tuning to all the channels on Astra FTA ul See next page Network Bouquet PIDs Use lt gt to change satellite Note F1 Preset F2 Mode 1 If you wish to only tune to a specific Network or Bouquet of channels move the cursor to highlight the Bouquet box and use the LEFT RIGHT keys to scroll through the pre stored Bouquets You should now see both signal meters reading a good signal level and the receiver will prompt you to press OK to start tuning all the channels from the selected Network or Bouquet 2 If you only wish to download Free to Air channels high light the FTA box and turn the option to on Provided your dish is installed correctly and aligned to the relevant satellite both the Signal and Data bars should display a GREEN bar which denotes the following The first bar shows the actual satellite SIGNAL strength You should see a GREEN bar showing your satellite signal is medium to good If it is R
14. checking channel parameters downloaded from the broadcaster Name To access the Edit Channel Details menu LNB Al Press the MENU key select Channel Setup PIDs in then select Edit Channel Details and press OK eur Ea Fee 3 ee ideo By using the UP DOWN LEFT RIGHT F1 F2 Text PID and the OK ESC keys you may move to any Gee PCR PID field to edit the associated parameters the operation is similar to using the manual tuning menu Once all changes have been made Press OK to retune to these new parameters Note It is important to identify whether the channel is TV or Radio so that the channel is stored under the appropriate channel list TV or Radio List Arrange The channel sort facility allows you to drag and drop channels to your preferred location Within the Channel Setup menu you will find the Sort Channels option Move the cursor to highlight Arrange in the Channel Setup menu and press OK Use the TV or Radio keys to select the listing you wish to sort TV Channels list radio Use the UP DOWN LEFT RIGHT keys a channels to move the cursor highlight the channel Neca select channel you wish to move and press OK to select Sky News It The selected channel now will move eee exit i Kiosk 2 with the cursor Use the UP DOWN LEFT RIGHT keys to move the channel to the new location Press OK to drop the selected channel Rhone l into the new position or ESC to cancel 1 skyl iero the ch
15. e please call an Authorised Service Agent Factory PIN Code 0000 New PIN Code J Please keep this section or this manual in a safe place Advanced users guide Tuning to different channel frequencies If the satellite you desire is not in the Preset listing or you want to tune the receiver to a different set of channels please follow the instructions below To access the tuning menu press the Menu key Move the cursor to Channel Setup and press OK Press OK on Tuning to access the Tuning Menu Press F1 to enter the Manual Tuning Menu By referring to your channel listings enter the Frequency Symbol Rate use 0 9 keys Polarity and FEC Use LEFT RIGHT keys in the appro priate boxes for the channels you wish to tune to Note If you are using more than one LNB be sure to select the correct LNB A B C or D for your tuning parameters You can change your LNB settings by highlighting the LNB settings button and pressing OK see page 22 You need to press OK to update the entered parameters and thereceiver will try to tune to the new settings If the message Signal Found is displayed and both the Signal and Data bar graphs are GREEN you may now select a tuning method If the message No Signal is shown please check that your tuning parameters are correct and amend if necessary Check you LNB settings are correct you can access the LNB set up menu by highlighting the LNB Setting
16. f the Audio Control menu will display the available audio channels and the user can then select either channel L or R for the desired language Otherwise the default L R setting would have the two languages mixed together and they will be heard at the same time From this menu the left column indicates the default languages available and the right column Lapueco autio Cruel indicates the available audio sub channels The e User may then move the cursor to the L or R sub fra channel and listen to decide whether the required dan language is available Notes The left column is the default language setting and this option is storable If the user changes the default language to another language any new programmes which do not support the new default language may become silent When this happens the receiver will display the Missing Audio icon on the Information Banner you can press the LANG key to select a different default language Missing Audio icon ex Many broadcasters transmit multiple languages and programmes on a number of audio sub channels With this menu the user can listen to any of the sub channels by moving the cursor to highlight them when available The L and R audio sub channels can vary from programme to programme so this is not stored and will revert to L R Stereo when you change channel Additional Information When viewing a programme pressing the info key will display the information banner
17. ferences menu Press Menu select system Select Menu Language You may change the default menu language Select Menu Language Engusn The number of languages available depends ERG Type a Bull on the receiver s software version grauit Audio canguage ong Menu Transparency EPG Type You can change the Electronic Programme Guide format between FULL EPG or CONDENSED EPG See EPG section under Accessing Channels Default Audio Language You can select or change the default language for your programmes with this menu When tuning for new channels the receiver will automatically search for the default language if available See the Selecting Different Audio Channels section Menu Transparency Use this feature to adjust the transparency of the receiver s menus Set local time The Digital Satellite receiver is equipped with an internal clock The time is displayed on the channel information banner and on the EPG so that you will never miss your favourite programme wherever the programmes are transmitted from Offset from GMT Enter the time difference between your local time and GMT in this box Offset from GMT Local Time Some broadcasters may not transmit the time Local time 13 together with their programme content In this case you may need to enter the local time of your country here Note This is a 24hr clock System Information The system information option on the Installation menu above displays
18. l Lock menu aem com se Use UP DOWN LEFT RIGHT to select the channels you Sar EOE wish to lock press F2 to turn the LOCK tag ON and OFF K3 TV54 192E Once you have tagged all the channels to be locked acra press ESC to return to the Parental Control menu and make sure both Channel Lock and Menu Lock are switched to ON Press ESC twice to return to viewing mode and switch the pS n aa cer aA Red a aa receiver to Stand by and back to ON again m Now go to any Locked Channel e g TNT and you will see that this is locked To Unlock press F2 and enter the PIN number and press OK F2 to LOCK UNIOCK Changing the PIN The factory default PIN is set to 0000 At any time the user may change this PIN code by accessing the Change PIN menu Channel Lock OFF Menu Lock OFF ane oa aE Confirm Lock Unlock Channels Change PIN Note Channel Lock is only effective if Installation Channel Setup menus are also locked with Menu Lock To change the PIN code enter in the new PIN into the New PIN box and re enter the same PIN again in the Verify Box to confirm If the two PINs are not identical the change will be aborted and the user will be asked to either re enter the new PIN or press ESC to abort the PIN change If the PIN is accepted this will now be your new PIN Don t forget your PIN number Please write down your PIN code below and keep in a safe place If you have forgotten your PIN cod
19. ll not be moved or deleted 20 Deleting Channels You can choose one of the two following methods Delete Channels you may select individual channels for deletion Clear All Channel Info you may delete all channels in one operation 1 Deleting Channels Move the cursor to highlight Delete Channels in the Channel Setup menu and press OK By default TV channels are listed press the RADIO key to access the Radio list VERE List radio Use the UP DOWN LEFT RIGHT keys to move Play Channel the cursor highlight the channels you wish to Toggle tag delete and press F1 to tag the channels to be Moviosi Delete tagged deleted Notice that the tagged channels now eee channels have an X tag next to them Pressing F1 will Kiosk 2 cancel If you wish to tag all the channels press F2 Pressing F2 again will remove all the tags eda If you wish to preview the channel before tagging press Info You can tag channels while in pre view mode changing channels with UP DOWN keys and tagging them with F1 Press the Info key to return to the Delete Channels menu Once you have tagged all the unwanted 1124 cana 1 20 channels press OK to confirm m F1 toggle delete ESC exit Delete Press F2 key to confirm deletion or SansuhiG Signal press any Other key to return to oa the Delete Channels menu 2 Clear All Channel Info Only use this option if you would like to DELETE ALL CHANNELS stored in your receiver All s
20. ls on the selected satellite depends on the number of channels available You may press the ESC key to stop auto tuning anytime All the channels found TV and Radio will be displayed in the two separate boxes provided in the Auto Channel Search menu Once all the channels are found the Finished message will be displayed at the bottom of the menu indicating that the process has finished Now press the OK key to store the new channels You should now be able to view the first channel found by your receiver The channel number channel information and the clock will be displayed at the top of the screen for a few seconds You may recall this information banner by pressing the INFO key on your handset Note Some channels are scrambled only channel information will be displayed You may now either go and view your downloaded channels or continue to download channels from another bouquet or satellite Viewing your channels There are several ways to access the stored channels Using the UP DOWN keys on the remote handset to access the channels sequentially Using the numeric keys 0 9 by typing the channel number to access the channels directly Using the TV key on your handset to display the TV channel list Use the UP DOWN keys to move the cursor to highlight the desired channel then press OK to view that channel You may also use the LEFT RIGHT keys to skip to the next or previous page of the channel list for quicker scrolling
21. lty Local TV interference tune the output to another channel or connect to TV via SCART or phonos Press Signal key and check if Signal and Data levels are good enough Check remote batteries and that the receiver IR sensor is not covered marked IR on the front panel Technical Specifications Electrical Specification Video Inputs Video Outputs Audio Inputs Audio Outputs Mains power Connectors 4 x Phono RCA RS232 Modulator Bypass Input impedance 75Q 0 7V pk pk on R G B 1V pk pk on CVBS Y Output impedance 75Q 0 7V pk pk on R G B 0 1V pk pk on CVBS Y into 75Q load Input impedance gt 50kQAC coupled Output impedance 600QAC coupled Minimum load impedance 20kQ 90 250VAC 50 60Hz Composite video out 0 12V out Audio left Audio right 9 Way D RS232 DCE serial port UHF in out IEC male female or VHF in out F type country dependent Satellite IF input F type Satellite IF loop out F type Tuner Loop though Digital tuner with LNB input and loop output Full power loop through supported Frequency Range at LNB input 920 2150MHz Input connector F type female Impedance 75Q Input sensitivity 30 to 65dBm LNB supply voltages Supply voltage software switchable 13V 18V Current limit 0 to 400mA Software controlled LNB power on off LNB 22kHz Tone switching Amplitude 0 6Vpp 0 2V Frequency 22KHz 2KHz Duty Cycle 50 20 Full DiSEqC specification V1 0 supported
22. nancial report 1235 jsenhedule 12 30 13 00 12 00 14 00 8 Round Detroit GP Eurosport ETTET 3 Sci fi Channel 12 30 13 00 Sci fi Channel Wonder Woman 4 NBC Europe 12 30 12 45 12 30 13 00 5 Canal Swe 12 30 13 45 Regional financial report NBC Europe No Info 12 30 12 45 Full EPG Condensed EPG Selecting different audio channels In digital satellite broadcasts multiple audio languages can be simultaneously transmitted by the programme provider Default audio setting The user can first select a default audio language via the Preferences menu for the receiver Once the default audio language has been stored all newly found TV Radio channels will then be stored with the selected default audio language Multi Channel Audio The broadcasters may transmit more than one language for any channel By pressing the LANG key on the handset the user can quickly find out what other languages are available for that channel If the left side column of the Audio Control menu shows a selection of different languages the user can select and store a new default language for that channel only for that channel the receiver will always return to the newly stored default language Sometimes two different languages are broadcasted with one language on the Left Audio Channel L and a different language on the Right Audio Channel R When this is available the Audio Channef column o
23. o your digital receiver For each LNB A1 to D4 you may specify the type and control method of the LNB L O Freq Enter the Local Oscillator Frequency in MHz of your LNB here For LNBs with two L O frequencies enter the Low Band L O frequency in the Low column and the High Band L O frequency in the High Column e g For a Universal LNB the Low Band L O frequency is 9750 MHz and the High Band L O Frequency is 10600 MHz Tone Your digital receiver is equipped with switch controls 12V 22kHz tone as well as DiSEqC 1 0 DiSEqC With the DiSEqC options switched on you can select between LNBs from A to D Note You may use these controls independently to select different LNBs and in addition you can use either in conjunction with DiSEqC switchs to increase the number of LNBs used Up to maximum of sixteen LNBs can be used Note Universal LNBs uses 22kHz to switch between Low Band and High Band and therefore the 22kHz control column is automatically disabled when Univ is selected in the LNB column Save Highlight this button and press OK to store any changes made to this menu If you exit by pressig ESC your changes will not be saved 22 TV VCR settings The TV VCR menu contains various options that allow you to configure the receiver to suit your system Press Menu select Installation to access the TV VCR Menu TV Type Standard 4 3 UHF Channel Enable TV SCART RGB Enable TV SCART S Video Enable VCR SCART S Video
24. ost This final screen confirms the receiver has been reset to factory defaults Warning This will Reset All settings to default values Press F2 to continue any other key to exit Stored settings including LNB and TV VCR configurations parental installation access control and preferences Warning Are you sure you want to continue All stored settings will be reset to default values Press OK to continue any other key to exit Stored settings including LNB and TV VCR configurations parental installation access control and preferences Warning Stored settings reset to default values Press any key to exit 25 Trouble shooting If you suspect there is a fault with your receiver please check the following trouble shooting guide before calling an authorised service agent Warning Under no circumstances attempt to repair the receiver yourself Tampering with the receiver may result in fatal electric shock and will invalidate your warranty Symptom Possible cause No receiver display Receiver is ON but no picture or sound Receiver is on no picture or sound except menus Interference on picture sound OK Interference on picture noisy audio Receiver not responding to remote 26 Check that the receiver is plugged in and there is power at the mains socket Check that your TV is switched on Channel scrambled Check tuning and set up Check Signal and Data levels Dish moved or LNB is fau
25. r proper ventilation for the unit do not obstruct them Do not insert or drop small objects into the unit Install the unit in a well ventilated location Never cover the unit or operate the unit near any heat source It is advisable to unplug the unit from the mains TV and the satellite dish when a thunderstorm is expected Cleaning your receiver Always unplug the unit from mains before cleaning the unit Do not use solvents of any kind to clean the unit only use a soft dry cloth SAMSUNG reserves the right to change specifications without prior notice This manual only covers the version of software supplied with the receiver Accessories User Manual 1 Batteries 2 UHF TV cable 1 G Remote Control Unit 1 System Connection Please unplug all unites from mains outlet before installation Once all connections are made please check again before connecting the equipment to the mains outlet The following shows a typical installation of a satellite receiver If you require further assistance for the installation of your satellite receiver please contact your local distributor Front Panel A B SAMPUNG DG ae E A Standby To switch the receiver on off B Menu To enter the main menu C Volume To increase or decrease volume level D Exit To back step or exit from menu E Display Displays channel mode and channel number see below F Channel To change channels or move cursor
26. s button and press OK see page 22 for LNB set up information If your tuning and LNB settings are correct your dish may not be adequate to receive the signal or out of alignment with the satellite Provided you are receiving a good Signal and Data you may now proceed with one of the three download methods Network Bouquet or Manual You may highlight the FTA box and change the option to on to download Free to Air channels Al Setup Satellite LNB Preset Satellite Frequence Sym Rate Polarity FEC Signal pe vata Signal Found FIA un Auto Network Bouquet PIDs Use P gt to change satelite F1 Manual Fz mode Al Setup Satellite LIND Preset Satellite Frequence Sym Rate Polarity FEC srgrrar Signal Found Data FIA on Auto Network Bouquet PIDs use Ww nange sawe lt gt F1 Manual F2 Mode Manual Tuning Menu Tuning Modes Auto Tuning From the select frequencies the receiver will automatically search for all other frequencies within the tuning range and downloads them automatically into the receiver Once the channels have been downloaded all the TV and Radio channels will be displayed separately allowing the user to inspect them and decide whether they are to be stored or aborted This option is not available in Manual tuning mode F1 Network and Bouquet Tuning Within a digital broadcast transmission many other network frequencies are provided to
27. s channel lock out facility to restrict the access of adult programme material Menu Lock This will lock out the access of both the Channel Tuning and Installation menus from unauthorised users This will reinforce the Channel Lock as it also prevents other users from re tuning channels that are known to contain adult material To access the Parental Control menu P Lock Press Menu Parental Lock OK Enter Parental Lock PIN After the correct PIN Personal Identification Number has been entered the following menu will be displayed The default PIN is 0000 If you change your PIN please remember to keep it in a safe place Channel Lock This allows all channel locks to be either enabled or disabled all at once First use the Lock Unlock option to tag the individual channels to be locked then switch the Channel Lock option ON or OFF PockiUnloekchanhels Channel Lock Menu Lock OFF Menu Lock Change PIN This option toggles the menu lock ON or OFF When menu lock is ON you cannot access either Note Channel Lock is only effective if Channel Set up or Installation menus without Installation Channel Setup menus are also entering a PIN locked with Menu Lock Note Once the correct PIN has been entered to temporarily disable a lock this will remain unlocked until the receiver has been switched to standby mode Lock Unlock Channels anal ty aye Highlight this option and press OK to display the Channe
28. s list Please refer to the instructions below 1 In view mode press the TV button to display the TV channel list 1 Discovery V 2 You will now see the TV listing with your current channel highlighted 3 Press the FAVOURITES key heart shape to add a favourite icon next to the channel name This channel will be added to the Favourites List To add more channels to your Favourites Lis move the cursor to highlight another channel and press the FAVOURITES key f you press the FAVOURITES Canal 11 key again it will remove the favourite icon Canal 2 4 Press the OK key to store the favourite settings NN In view mode press the FAVOURITES key to display Pee the Favourite Channel List K2 K3 To view your favourite channel highlight it and press OK Electronic programme guide EPG This receiver is equipped with a unique dual EPG system which gives you two easy ways to view the programme information what s on now and whats on next When transmitted by the broadcaster the EPG system can display a variety of programme information ranging from start and end times of a programme to additional information about the programme itself You can easily select and view a programme on the EPG by highlighting it and pressing OK You can also choose between a FULL or ENE igien CONDENSED version of the EPG using Jefault Audio Lan the Preferences section under the Installation Menu CNN International Regional fi
29. software version numbers This can be used to identify whether there is a newer version of software available As digital receiver technology is constantly i i i SID x x improving newer and better versions of Application SRE software will become available in future to dd mm yyyy further enhance your receiver New software Boot 2 0 updates will be available to your dealer and F P 1 x On the Internet 24 Reset to factory defaults The Reset To Factory Defaults option is provided to enable the user to completely reset the receiver Unlike the Clear All Channel Information option which allows the user to clear only the channel list the Reset To Factory Defaults option will clear all changes made by the user including Installation Channel Setup and Parental Control changes Reset To Factory Defaults menu After pressing OK the following menu will be displayed This process has been designed to be lengthy to minimise accidental resetting of the receiver to it s the default condition Press F2 to proceed to the next step any other key will return you back to the installation menu You are asked to confirm this once more Pressing OK at this point will enable the Reset to Factory Default function Pressing any other key will return you back to the installation menu Beyond this point all stored settings including LNB TV VCR configurations parental installation access control and preferences will be l
30. tored channels in the receiver will be erased at the end of the following procedure From the Main Menu select Channel Setup and Delete You will be prompted with a warning screen Follow the on screen messages to proceed Warning Are you sure you want to continue in deleting all your channels or to abort You will lose ALL channel information Finally press OK to confirm deletion of all Biss Ox tolcontinus channel information pincers Note The above procedure will delete all stored channels in the receiver s memory Any modifications made to the receiver s set up LNB settings Parental Lock etc will NOT be affected For instructions on how to reset the receiver to factory condition please refer to the Reset to factory defaults section in this manual 2i Installation LNB The installation menu provides access to LNB settings and features These can expand the receivers capabilities as well ascustomising the receiver to your preference Press Menu and select Installation to access the Installation menu LNB lt Al gt Help Low Messages High DiSEqc A Tone 22k 12v LNB Power DISEqC 1 0 The default LNB setting is as per the diagram above LNB Power This toggles the LNB power supply on and off This option should be set to ON With the LNB power switched off all control signals for LNB switches and DiSEqC will also be disabled LNB A1 to D4 Up to sixteen universal LNBs can be conntected t
Download Pdf Manuals
Related Search