Plantronics CS55 Series User's Manual
Contents
1. desk phone has a volume control set it to mid range Powering up the Headset If the headset battery is charged and the base is connected to power the headset is automatically on The CS55 does not have an ON oFF button Talk Indicator Light on Headset Base GREEN Listening Volume and Mute Button Call Control Button Talk Indicator Light To Place Answer or End Calls Desk phone Configuration pees ece tees eee csceces ccc cseerstessssstetscessstsrstecsststesstssterstertessretestsresterersttstettstesscseterestetesterecsttetsrsrestetsterssestersterscestetsrettstereresstestsrery To place a call pees eceneececececcteececceesesrsrssserststersstersestecertstecsrestersrscsnssesttsrsresserscsrtstetstersetersrestsrestererettsrscsrssserstessetsttrsrecterststsrsrtersrsressrtstssses To answer a call ens eceeeececececcecececcceneerstessessterersstersrstesetstecstestersrestecsrsttsrstesssrecsesetesssterscsersrscterecterersttsrscstessersterseteterersstersestersststerstecsrsterses To end a call 10 Plantronics CS55 Setup Guide To Mute a Call Push in the mute control to activate mute push in again to de active You will hear a slight beep in the speaker when mute is activated Mute control g Set Listening Volume While on a call adjust the listening volume by using the Listening Volume Switch on the back of the Base Listening Volume Switch Position 1 Loudest Position 4 Softest To Fine Tun2. 38 2007 Plantronics Inc All rights reserved Plantronics the logo design CS55 IntelliStand and Sound Innovation are trade marks or registered trademarks of Plantronics Inc All other trademarks are the property of their respective owners Patents U S 5 210 791 6 735 453 6 903 693 D469 756 D492 667 D519 975 Australia 147229 and 303306 EM 293964 and 69109 France 651 857 651 865 Germany 40108524 4 GB Regd Des No 2104923 Taiwan D109301 Patents Pending Printed in USA 76529 02 04 07 Q ac Plantronics Inc PLANTRONICS 345 EncinalStret 3 3 393 SSS SOUND INNOVATION Santa Cruz CA 95060USA SSS a www plantronics com__ __
3. 4 Easy Steps The fastest way to setup your CS55 Headset System Sy Uy dtm a ee ee with Earloop AS pee o PLANTRONICS SOUND INNOVATION a O n OO O O ee ee OO O gt CS55 Series SETUP GUIDE Headset Base with Pre installed Phone Cable 099 Base Power Adapter Headband Ear Loops Please refer to the separate Safety Instructions for important product safety information prior to installation or use of the product CS55 With Automatic Handset Lifter Adds HL10 Automatic Handset Lifter User Guide Automatic Handset Lifter is bundled with certain CS55 configurations and also available separately HL10 Additional Parts Kit if needed Extender Ringer Adapter for Arm Microphone Nortel i2004 Phones 2 Plantronics CS55 Setup Guide STEP ATTACH HEADBAND OR EARLOOP TO HEADSET amp ADJUST FIT Snap the speaker of the headset into the retaining ring of the headband or one of the three ear loops provided See below 4 So If you will be wearing the headband adjust the band for the most comfortable fit See 1 below For either wearing option rotate the headset in the retaining ring until the microphone is pointed toward your mouth See 2 above Questions For fast efficient Technical Support call 800 544 4660 Ext 5538 3 STEP Use Configuration A if You will use the Automatic Handset Lifter Or Your phone has NO buil
4. IntelliStand Switch In the uP position answer make or end a call by pressing the Call Control Button on your headset Choose the uP position if you plan to wear your headset most of the time In the DOWN position calls are initiated or answered by taking the headset out of the stand A short delay gives you time to put the headset on Choose the down position if you think you ll wear your headset ony while on calls In the DOWN position you can still answer end or make a call by pressing the Call Control Button In either the up or down position placing the headset in charging cradle will end the call a Q If the sound quality is poor or background noise is evident after these adjustments readjust the configuration dial for better quality 12 Plantronics CS55 Setup Guide Talking Muted GREEN Power RED Charging AMBER Base Status Base Light Headset charging Flashing amber Headset in talk mode Solid green Headset Status Headset Light Tones Out of Range Warning If you are on a call and walk out of range of the base your headset will issue audible tones at its operating limit If you are on a call you will hear two tones when reaching edge of range and again when back in range If you stray out of range active calls will be suspended Calls will be re established on walking back into range If you remain out of range for more than 10 minutes the system will drop the call Low Batter
5. e Listening Volume Rock the headset volume control back and forth to adjust listening volume in minor incremental adjustments Volume NOTE You must be in talk mode i e on a call to adjust controls Set Speaking Volume While on a call set the Speaking Volume Switch to the best setting for the listener a paper clip or pen tip can help Too high a setting can produce an uncomfortable echo for you and distorted sound for your listeners You will be able to make minor adjustments to speaking volume while on a call using the Speaking Volume Control on the back of the base Speaking Volume Switch Position A Softest Position D Loudest Congratulations You have successfully set up your CS55 Series Headset System To begin using your Headset System or help with service support or warranty information please continue with the next several pages Questions For fast efficient Technical Support call 800 544 4660 Ext 5538 11 To Fine Tune Speaking Volume While on a call you can adjust your speaking volume by using the Speaking Volume Minor Adjustment Control on the back of the base Listening volume can be adjusted on the headset Speaking Volume Minor Adjustment Control To set the IntelliStand Feature The CS55 Intellistand feature allows you to choose how to activate your headset when answering or making a call Consider how you ll use your headset to determine the best setting for you
6. h 4 as necessary If you hear a dial tone the lifter height is now set correctly Please continue with the next section Mount the Lifter in Permanent Position 7 Ifyou still cannot hear a dial tone you will need to change the setting on the Configuration Dial Using a coin or paperclip turn the Configuration Dial to a different setting until you hear a dial tone To view an interactive quick start guide online visit www plantronics com CS55 Configuration Dial Li Position Indicator Multiple settings might work with your phone however only one is the optimal position If you still cannot hear a dial tone please call Technical Support at 800 544 4660 Extension 5538 C Mount the Lifter in permanent position 1 Remove the protective strips from the three mounting tapes on the underside of the Lifter 2 GENTLY place the Lifter on the desk phone in the optimum position as determined above Test the Lifter to verify positioning by pressing the Call Control Button on your headset to activate the Lifter and listen for a dial tone 3 Press FIRMLY to adhere the Lifter to the desk phone Questions For fast efficient Technical Support call 800 544 4660 Ext 5538 9 hearing loss Always listen at moderate levels For more information on headsets and hearing A For your safety do not use headset at high volumes for extended periods of time Doing so can cause visit www plantronics com healthandsafety If your
7. he power cord into the YELLOW labeled connector on the bottom of the Headset Base The RED Power light on the left front of the Headset Base will turn on See illustration at bottom of page Insert into YELLOW labeled power connection on Headset Base as shown to charge Base Power Adapter Headset Base bottom view B Charge the Headset for at least 20 Minutes before using 1 Gently push the headset into the charging cradle as shown below The amser Charge Status light on the base will flash to indicate the headset battery is charging A solid light indicates full charge A full charge will take approximately 3 hours Charge Status AMBER 6 Plantronics CS55 Setup Guide STEP Why use a handset lifter The lifter greatly simplifies using a headset with your desk phone It lets you answer and end calls without being near your phone Q The HL10 Automatic Handset lifter is included with certain CS55 configurations and is also available separately A Connect Handset Lifter power cord to Headset Base 1 Verify that the base to desk phone cable is connected to the handset port of the desk phone and not the headset port Refer to Step 2 Configuration A 2 FIRMLY PRESS the Handset Lifter power cord into the RED labeled port to ensure a complete connection Headset Base bottom view FIRMLY press Lifter power cord into RED labeled port on Headset Base Questions For fas
8. roducts that do not conform to the warranty We may use functionally equivalent reconditioned refurbished remanufactured pre owned or new products or parts e To obtain service in the U S contact Plantronics at 800 544 4660 Ext 5538 e THIS IS PLANTRONICS COMPLETE WARRANTY FOR THE PRODUCT e This warranty gives you specific legal rights and you may also have other rights that vary from state to state Please contact your dealer or our service center for the full details of our limited warranty including items not covered by this limited warranty Maintenance e Always unplug the Headset Base from the telephone and the Base Power Adapter from the power source before cleaning e Clean the equipment with a damp not wet cloth e Do not use solvents or other cleaning agents Battery replacement The custom battery supplied in your headset should last 2 3 years When talk time decreases significantly the battery may need replacing Please call Plantronics at 800 544 4660 Ext 5538 to order a new battery Still having problems Given the hundreds of different types of phones it s possible a trick or two may be needed to make the CS55 System work with your desk phone For further help For the product knowledge base and instant live chat with Technical Support www plantronics support e For the Plantronics Technical Support Center open from Sunday 3 00 Pm to Friday 5 00 pm PST except major U S holidays 800 544 4660 Ext 55
9. t efficient Technical Support call 800 544 4660 Ext 5538 7 8 B Determine Lifter position and height setting 1 Set the Lifter Height Switch to the lowest setting Lifter viewed from back Start with Lifter Height Switch in lowest position 2 While wearing your headset slide the Handset Lifter Arm under the handset until the lifter base touches the side of the phone 3 Slide the Lifter up to where it nearly touches the handset earpiece Slide Lifter under handset then up toward the ear piece we Q Use the Extender Arm to Stabilize Handset if needed If your handset falls off the phone base or does not return to its cradle when lowered you will need to attach the Extender Arm to the Lifter as described in the HL10 Additional Parts Kit Plantronics CS55 Setup Guide 4 Press the Call Control Button on the headset This will activate the Handset Lifter and lift the handset from the phone If you hear a dial tone the lifter height is set correctly and needs no adjustment Please continue with the next section Mount the Lifter in permanent position on the following page Press Call Control Button 5 If you do not hear a dial tone the Lifter may not be raising the handset high enough OR the Configuration Dial may need adjusting Continue to step 6 6 Check the Lifter height adjustment by moving the Lifter Height Switch to a higher position Repeat steps 2 throug
10. t in headset functionality no Headset button Configuration A 1 Unplug the handset coil cord from the desk phone handset port A then plug it into the GREEN labeled handset port B on the Headset Base WN pas RL Handset O Gy Wy ie O oe a 7 aa a N v s 2 Plug the short BLACK Phone Cable that is pre installed on the Headset Base into the now open handset port A on the desk phone 4 Plantronics CS55 Setup Guide Use Configuration B if You will NOT use the Automatic Handset Lifter and Your phone has built in headset functionality a Headset button Confirm there is a HEADSET button on your phone Headset Base bottom view O Q l a Ss ae S w ze Q 1 Plug the short BLACK Phone ned 3 P Cable that is pre installed on the Headset Base into the Headset port C on the desk phone YU alcjor ala HANDSET port or HEADSET port You should only use the headset port if you will noT be using the Automatic Handset Lifter AND you have a pre programmed Headset button on your phone In this configuration you MUST press both the Headset button on your phone and the Call Control Button on the headset to answer end calls Questions For fast efficient Technical Support call 800 544 4660 Ext 5538 5 STEP A Connect Headset Base to power outlet 1 Plug the Base Power Adapter into a wall outlet then plug t
11. t microphone towards your chin e Listening volume may be too high on phone If your phone has a handset volume control lower this until the distortion disappears e Ifthe distortion is still present lower the volume us ing the Listen Volume Button on the headset Additional Information and Support Additional Information Additional Information including an Interactive Quick Start Guide Product Information and Accessories including the HL10 Automatic Handset Lifter and Online Indicator Light can be found at www plantronics com CS55 Telephone Support Telephone Tech Support at 800 544 4660 Ext 5538 Sunday 3 00 PM to Friday 5 00 pm PST If the distortion persists select another Listening Volume Switch setting on the headset base e Make sure there is 12 distance between your CS55 base and your computer and 6 between your base and your telephone e System needs to be reset Perform system reset as described on page 14 People talk to can hear a buzz in the background e Move the base further away from your phone e Power adapter is plugged into a power strip Plug the power adapter into the wall directly Talk time performance is significantly degraded even after a full recharge e Battery is wearing out Call Plantronics at 800 544 4660 Ext 5538 for factory service information The Handset lifter is installed but does not lift the handset e Be sure the handset lifter power cord is firmly pushed in
12. th buttons 2 Press the call control button again The talk indicator light will again blink briefly to indicate the headset is back to normal operation 3 Disconnect the AC charger from the AC charging jack for 5 seconds 4 Reconnect The system reset operation is complete 14 Plantronics CS55 Setup Guide can t hear a dial tone at the headset e Make sure your headset is charged e Press the Call Control Button on your headset e Make sure the lifter is lifting the handset high enough to operate the hookswitch set to a higher setting if necessary e Adjust the Configuration Dial on the left side of the base Align the 1 on the dial with the ridges to the right side of the dial If there is no dial tone for setting 1 try the other dial settings Adjust the Listen Vol ume Button on the headset If the volume is still too low select another setting on the Listening Volume Switch on the headset base hear static e Make sure there is at least 12 between your CS55 base and your computer and 6 between your base and your telephone If adjusting the distance doesn t help your base settings may need adjusting e Your system may need to be reset See the System Reset procedure on page 14 also in the User Guide available online at www plantronics com CS55 The sound is distorted or hear an echo in the headset e Reduce speaking volume by changing the Speaking Volume Major Adjustment Switch e Poin
13. to the handset lifter jack on the base My handset lifter operates every time remove or replace my headset in the base e IntelliStand is enabled To disable this feature move the IntelliStand switch to the UP position See page 12 The call is dropped Talk indicator in the headset and base will not be illuminated e Headset lost subscription Try to reset the system See below if this does not work Try the re subscription procedure on page 14 also in the User Guide available online at www plantronics com CS55 Online Technical Support www plantronics com support Knowledge Base FAQs Live Chat with a Support Technician Email Support Product Compatibility Guide Product Manuals including all available language versions Service Product Registration Questions For fast efficient Technical Support call 300 544 4660 Ext 5538 15 YEAR This Plantronics headset delivers superior durability and reliability backed by a one year warranty A 1 Questions 800 544 4660 www plantronics com Ne Plantronics Limited Warranty e This warranty covers defects in materials and workmanship of products manufactured sold or certified by Plantronics which were purchased and used in the United States e This warranty lasts for one year from the date of purchase of the products e This warranty extends to you only if you are the end user with the original purchase receipt e We will at our option repair or replace the p
14. y Warning When battery is low a single tone repeats every ten seconds You should recharge the headset immediately Mute Warning When Mute is first activated three rapid high tones will sound These tones will repeat every 15 seconds while Mute is active When Mute is deactivated you will hear three rapid low tones Questions For fast efficient Technical Support call 800 544 4660 Ext 5538 Subscription The headset and base unit are supplied subscribed to each other However if you wish to use a replacement headset with the base unit then the units must be re subscribed as follows Return the headset to the charging cradle 1 Press and hold both speaking volume fine tune buttons on the base unit for a minimum of 5 seconds The power indicator will then flash red 2 Press and hold the headset mute button for a minimum of 5 seconds The talk indicator light on the headset will then illuminate green Successful re subscription is indicated when the base power indicator is fully illuminated and the headset talk indicator light is off If re subscription fails within 2 minutes the headset will return to the un subscribed state Try the re subscription process again or call Technical Support System Reset To recover from some fault conditions you may need to perform a system reset 1 Press both the call control button and the listening volume mute button for 5 seconds When the talk indicator light blinks release bo
Download Pdf Manuals
Related Search