Philips AX 2330/00 User's Manual
Contents
1. CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure Batteries supplied or optionally available You can use the following batteries with this CD player normal batteries type LR6 UM 3 or AA or alkaline batteries type LR6 UM 3 or AA Notes Old and new or different types of batteries should not be combined Remove batteries if they are empty or if the player is not going to be used for a long time Inserting batteries see figure 3 1 Push OPEN to open the CD lid 2 Open the battery compartment and insert either 2 normal or alkaline batteries Battery indication The approximate power level of your batteries is shown in the display maa Battery full Battery two thirds full kR S Battery one third full 4 Battery dead or empty W hen the batteries are dead or empty the symbol flashes b HLL is displayed and the beep tone sounds repeatedly BREE X4 Batteries contain chemical substances so they should be disposed of properly Both the model number and production number are located on the bottom of the set POWER SUPPLY GENERAL INFORMATION Mains adapter supplied or optionally available Use only the adapter 4 5 V 450 mA direct current positive pole to the center pin Any other product may damage the player 1 Make sure the local voltage corresponds to the power Ger adapter s voltage R 2 Connect2. the power adapter to the 4 5V DC socket of the player and to the wall socket Note Always disconnect the adapter when you are not using it Environmental information All redundant packing material has been omitted We have done our utmost to make the packaging easily separable into two materials cardboard box and polyethylene bags protective foam sheet Your set consists of materials which can be recycled if disassembled by a specialized company Please observe the local regulations regarding the disposal of packing materials exhausted batteries and old equipment This product complies with the radio interference requirements of the European Union CD player and CD handling Do not touch the lens a of the CD player Do not expose the unit batteries or CDs to humidity rain sand or excessive heat caused by heating equipment or direct sunlight You can clean the CD player with a soft slightly dampened lint free cloth Do not use any cleaning agents as they may have a corrosive effect To clean the CD wipe it in a straight line from the center toward the edge using a soft lint free cloth A y cleaning agent may damage the disc Never write on a CD or attach a sticker to it The lens may cloud over when the unit is moved suddenly from cold to warm surroundings Playing a CD is not possible then Leave the CD player in a warm environment until the moisture has evaporated Active mobile
3. Portable CD Player AX 2330 User manual Manuel d utilisation Manual del usuario Gebruikershandleiding PHILIPS Meet Philips at the Internet http w ww philips com English Francais Espanol ET Nederlands as AX 2330 CLASS 1 LASER PRODUCT amp Printed in China QUICK START MISE EN SERVICE RAPIDE English CONTROLS POWER SUPPLY CONTROLS see figure 1 2 Skips and searches CD tracks backwards skips and searches CD tracks forwards programs tracks and reviews the program selects the different playing possibilities SHUFFLE SHUFFLE REPEAT ALL REPEAT REPEAT ALL and gt C 47 7 Switches the player on starts or pauses CD play stops CD play clears a program or switches the player off 3 5 mm headphone socket socket to connect the player to another audio input of an additional appliance socket for external power supply adjusts the volume Switches the bass enhancement on and off This button also switches acoustic feedback the beep on off when it is pressed for more than 2 seconds opens the CD lid stores the last position of a CD track played locks all buttons switches RESUME and HOLD off a e foo m N o
4. With HOLD activated you can avoid accidental activation of other functions 1 Switch the slider to HOLD to activate HOLD All buttons are locked 2 is shown when you press any button If the set is switched off HOLD will be shown only when Din is pressed 2 To deactivate HOLD switch the slider to OFF Note If you deactivate HOLD by switching the slider to RESUME you will be activating the Troubleshooting RESUME function WARNING Under no circumstances should you try to repair the set yourself as this will invalidate t before taking the un these hints consult he warranty If a fault occurs first check the points listed it for repair If you are unable to solve a problem by following your dealer or service center The CD player has no power or playback does not start Check that your batteries are not dead or empty that they are inserted correctly that the contact pins are clean Your adapter connection may be loose Connect it securely For in car use check that the car ignition is on Also check players batteries The indication no Check that the C The indication 7 CD RW CD R w a 5 is displayed Dis clean and correctly inserted label side upward f your lens has steamed up wait a few minutes for this to clear a 5E is displayed as not recorded properly Use FINALIZE on your CD recorder The indication HoLo is on and or there is no reaction to controls If HOLD i
5. d with 4 5V DC input socket on the set 3 If necessary clean the cigarette lighter socket to obtain a good electrical contact 4 Turn down the volume and connect the cassette adapter plug to LINE OUT N on the set 5 Carefully insert the cassette adapter into the car radio s cassette compartment 6 Make sure the cord does not hinder your driving 7 Decease the volume on the set if necessary Start playback on the set and adjust the sound with the car radio controls Always remove the voltage converter from the cigarette lighter sock et when the set is notin use Note If your car radio has a LINE IN socket it is better to use it for the car radio connection instead of the cassette adapter Connect the signal lead to this LINE IN socket and to LINE OUT on the set Playing a CD This CD player can play all kinds of Audio Discs such as CD Recordables and CD Rewritables Do not try to play a CD ROM CDi VCD DVD or computer CD 1 Push the OPEN P slider to open the player 2 Insert an audio CD printed side up by pressing the CD onto the hub 3 Close the player by pressing the lid down 4 Press Pil to switch the player on and start playback The current track number and elapsed playing ime are displayed You can pause playback by pressing KIL The time at which playback was paused starts lashing You can continue playback by pressing Pil again 5 Press mito stop playback The total numbe
6. ed by light vibrations and shocks Continuous playback is ensured However ESP does not prevent playback interruptions during vigorous running It also does not protect the unit against any damage caused by dropping In this set ESP is default ON It is possible to set ESP off Press MODE for more than 2 seconds gt ESP disappears Press MODE again for more than 2 seconds gt ESP is displayed ESP on gt ESP off gt ESP on FEATURES TROUBLESHOOTING RESUME and HOLD You can interrupt playback and continue after up to 1 minute in the disc stop position only fro m the position where playback stopped RESUME You can lock all buttons of the set so that no action will be executed HOLD Use the RESUM E HOLD RESUME continu 1 Switch the slider to RESUME during playback to acti vate RESUME gt RESUME is N 3 Press Pil W hene gt RESUME is where you have stopped Press W whenever you want to stop playback OFF slider for these functions ing from w here you have stopped Shown ver you want to resume playback shown and playback continues from oo E deso Satis To deactivate RESUME switch the slider to OFF gt RESUME goes off HOLD locking al You can lock the but buttons tons of the set by switching the slider to HOLD Now when a key is pressed no action will be executed This is of use for example when transporting the player in a bag
7. layed Clearing the program While playback is stopped press mi to clear program LL EAr is displayed once PROG goes off and the program is cleared Note MIR es s CLER The program will also be cleared if the power supply is interrupted or if the CD player lid is opened or if the set switches off automatically Selecting different playing possibilities M ODE It is possible to play tracks in random order to repeat a single track or the entire CD and to play the first few seconds of each track 1 Press MODE during playback as often as required in order to activate one of the following modes The active mode is shown in the display gt SHUFFLE All tracks of the CD are played in random order until all of them have been played once gt SHUFFLE REPEAT ALL All tracks of the CD are played repeatedly in random order gt REPEAT The current track is played repeatedly REPEAT ALL The entire CD is played repeatedly QS gt RL HH The first 10 seconds of each of the remaining tracks are played in sequence 2 Playback starts in the chosen mode after 2 seconds Af SHUFFLE REPEAT ALL er To return to normal playback press MODE repeatedly until the display shows no active modes ESP With a conventional portable CD player you might have experienced that the music stopped e g when you were jogging The Electronic Skip Protection prevents loss of sound caus
8. mber is displayed 2 Press Pil to start CD play Playback starts with the selected track Searching for a passage during playback 1 Keep aa or KR pressed to find a particular passage in a backward or forward direction Searching starts while playback continues at low volume After 2 seconds the search speeds up 2 Release the button when you reach the desired passage Playback continues from this position Notes If the player is in SCAN mode see MODE chapter searching is not possible In shuffle shuffle repeat all or repeat mode see MODE chapter or while playing a program searching is only possible within the particular track FEATURES Programming track numbers You can store up to 30 tracks to play in a program A single track may be stored more than once in the program 1 While playback is stopped select a track with 144 OF KRL 2 Press PROG to store the track PROG lights up the track number programmed and with the total number of stored tracks are displayed 3 Select and store all desired tracks in this way 4 Press bl to start playback of your selected tracks PROG is shown and playback starts You can review the program by pressing PROG for more than 2 seconds The display shows all the stored tracks in sequence Notes If you press PROG and there is no track select ed 70 94 is displayed If you try to store more than 30 tracks FL 2 is disp
9. phones in the vicinity of the CD player may cause malfunctions e Avoid dropping the unit as this may cause damage Headphones HE 035 Connect the supplied headphones to the LINE OUT N jack of the player Note LINE OUT f can also be used for connecting this set to your HiFi system To adjust the sound and volume use the controls on the connected audio equipment and on the CD player IMPORTANT Hearing safety Do not play your headphones at a high volume Hearing experts advise that continuous use at high volume can permanently damage your hearing Traffic safety Do not use headphones while driving a vehicle It may create a hazard and it is illegal in many countries Even if your headphones are an open air type designed to let you hear outside sounds do not tum up the volume so high that you cannot hear what is going on around you GENERAL INFORMATION CD PLAY In car use connections supplied or optionally available Only use the a 4 5 V DC Car voltage converter positive pole to the centre pin and car adapter cassette Any other product may damage the set 1 Put the set on a horizontal vibration free and stable surface Make sure it is in a safe place where the set is neither a dan ma E ger nor an N ON 5 obstacle to the driver and the passengers Il A 2 Plug the voltage converter into the cigarette lighter socket only for 12 V car battery negative grounding then connect the wired en
10. r of tracks and the total playing ime of the CD are displayed i iets a Press ml again to switch the player off To remove the CD hold it by its edge and press the hub gently while lifting the CD Note If there is no activity the set will automatically switch off after a while to save energy CD PLAY FEATURES Playback information e IfaCD Recordable CD R or a CD Rewritable CD RW is not recorded properly F 2 75 C is displayed indicating that the CD has not been finalized In that case use FINALIZE on your CD recorder to complete the recording e When playing a CD Rewritable CD RW please note that it takes 3 15 seconds after pressing Pil for sound reproduction to start e Playback will stop and the set will turn off if you open the CD lid e While the CD is read 0 flashes in the display Volume and bass Volume adjustment Adjust the volume by using VOL sa Bass adjustment Press DBB to switch the bass enhancement on or off gt DBB appears if the bass enhancement is activated Selecting a track and searching Selecting a track during playback Briefly press aa or once or several times to skip to the current previous or next track Playback continues with the selected track and the track s number is displayed See Selecting a track when playback is stopped 1 Briefly press aa or KRI once or several times to select the desired track The track nu
11. s activa ed then deactivate it Electrostatic discharge Disconnect power or remove batteries for a few seconds The CD skips tracks The CD is damag RESUME SHUFF No sound or bad s PAUSE might be Loose wrong or Volume might no Strong magnetic ed or dirty Replace or clean the CD LE or PROGRAM is active Switch off whichever is on ound quality active Press KIL dirty connections Check and clean connections be appropriately adjusted Adjust the volume ields Check player s position and connections Also keep away from active mobile phones For in car use ch cassette player s and that the ciga eck that the cassette adapter is inserted correctly that the car playback direction is correct press autoreverse to change rette lighter jack is clean Allow time for temperature change
Download Pdf Manuals
Related Search