Kettler ADIRONDACK 2511 User's Manual
Contents
1. primarily a recycled material UV inhibitors are also added to resist fading Simply maintain your furniture by cleaning with soap and warm water to ensure its long lasting beauty A soft bristle brush can be used on any tough to clean stains Stainless steel hardware is used in the assembly of these products and should be rinsed regularly with fresh water if being used in a coastal environment KETTLER Limited Warranty Ocean Comfort products are guaranteed for a period of 20 years for residential use and 5 years for commercial use starting from original purchase date This warranty covers defects in materials and or workmanship and does not apply to the hardware Warranty not applicable to any products deemed as misused abused or damaged due to an uncontrollable act of nature For Parts and Service please contact us directly at 866 804 0440 or email parts kettlerusa com KETTLER Made in the U S A KETTLER International Inc 1355 London Bridge Road Virginia Beach VA 23453 www kettlerusa com info kettlerusa com2. 2511 ADIRONDACK BENCH Contents 18 1 4 20 x 2 Bolts 1 Seat 1 Back 2 1 4 20 x 2 1 2 Bolts 2 Arm Rests 1 10 x 3 Screw 2 Front Chair legs 10 Washers 2 Back Chair legs 10 Locknuts 2 Cross Braces Locknut Washer Bolt Tools Required awe y 3 Phillips Head Screwdriver 7 16 Wrench a Align predrilled holes then insert bolts to attach front leg b Align predrilled holes then insert bolts Assembly Instructions to attach back legs G a With the wing on the post facing front 1b align the predrilled holes on front leg to the seat and insert the 1 4 20 x 2 Bolts through the leg in thru the seat Clean any plastic residue from the bolt then slide a washer on Screw on the locknut and then tighten it with the wrench and phillips screwdriver b Align the predrilled holes on the back leg to the seat and insert the 1 4 20 x 2 Bolts through Place arm rest the leg in thru the seat Clean any plastic residue on top of chair legs align front ky predrilled holes G Attach the back insert bolt of the chair by aligning holes on the arm and the 2 Place arm rest on top of chair legs align the seat to insert bolt front predrilled holes and insert the 1 4 20 x 2 Bolts through the leg and in thru the arm Clean off any plastic residue then slide a washer on the end of bolt Screw on the locknut and then tighten it with the wrench and phillips
3. screwdriver from the bolt then slide a washer on Screw on the locknut and then tighten it with the wrench and phillips screwdriver Repeat on the other front leg G a Attach the back of the chair to the seat by aligning holes and inserting a 1 4 20 x 2 Bolt then tighten with a phillips screwdriver b Attach the back of the chair to the arm by aligning holes and inserting a 1 4 20 x 2 Bolt Attach the aes Slide washerthen thru the arm leg and into the chair back then Pr locknut onto end of tighten with a phillips screwdriver 5 Y bolt then tighten Repeat on both sides aligning holes eter and inserting a 2 bolt Attach the cross braces of the chair to the legs by aligning holes and inserting a 1 4 20 x 2 Bolt through the leg into the cross brace and tighten with a phillips screwdriver Repeat on other leg Do Front and Back cross braces 5 Attach the center seat brace underneath to 5 Doerr ihe Halevi ie center the back insert a 10 x 3 screw thru the brace seat brace into the center of the into the center of the bottom back support then back of bench tighten with the screwdriver I S KETTLER Properly Seated BS Made in the U S A _ POSHERGRGINEE www kettlerusa com Copyright Kettler USA 309 01 info kettlerusa com www kettlerusa com ats ECO RESPONS Care amp Maintenance Ocean Comfort products are constructed from HDPE High Density Polyethelene
Download Pdf Manuals
Related Search