JVC GET0561-001A User's Manual
Contents
1. ESP INSTRUMENT SWE Warning If you need to operate the unit while driving be sure to look around carefully or you may be involved in a traffic accident Caution on volume setting Discs produce very little noise compared with other sources Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level MORE ABOUT THIS UNIT gt E Basic operations By pressing SRC on the unit you can also turn on the power If the source is ready playback also starts Ifyou turn off the power while listening to a disc disc play will start from where it had been stopped previously next time you turn on the power When no disc is loaded in the unit you cannot select CD as the playback source E Tuner operations During SSM search All previously stored stations are erased and the stations are stored anew Received stations are preset in No 1 lowest frequency to No 6 highest frequency When SSM is over the station stored in No 1 will be automatically tuned in H Disc operations Caution for DualDisc playback The Non DVD side of a DualDisc does not comply with the Compact Disc Digital Audio standard Therefore the use of Non DVD side of a DualDisc on this product may not be recommended General This unit has been designed to reproduce CDs CD Texts and CD Rs Recordable CD RWs Rewritable in audio CD CD DA A2. is set to WOOFER 3 The volume level automatically changes to VOL 30 if you change to LOW PWR while the volume level is set higher than VOL 30 TROUBLESHOOTING O Symptoms Remedies Causes Sound cannot be heard from the speakers Adjust the volume to the optimum level e Check the cords and connections The buttons on the unit do not work as you intended If you press M MODE some buttons work differently from it original function Wait for 5 seconds or press M MODE again General This unit does not work at all Reset the unit SSM automatic presetting does not work Store stations manually FM AM Static noise while listening to the radio Connect the antenna firmly Disc ejects Insert the disc correctly CD R CD RW cannot be played back Tracks on the CD R CD RW cannot be skipped Insert a finalized CD R CD RW Finalize the CD R CD RW with the component which you used for recording Unlock the disc Eject the disc forcibly Disc can be neither played back nor ejected Disc playback Disc sound is sometimes interrupted Stop playback while driving on rough roads Change the disc Check the cords and connections NO DISC appears on the display PLEASE and EJECT appear alternately on the display Insert a playable disc into the loading slot Microsoft and Windows Media are either registered trademarks or trad
3. 16 disc oS Sticker and sticker residue Stick on label Transparent or semi transparent Unusual shape C thru Disc semi transparent disc parts on its recording area amp S amp H S PREPARATIONS gt How to reset your unit Detaching the control panel Warped disc SS Reset the unit after installation is complete Your preset adjustments will also be erased How to forcibly eject a disc ATT ws Hold a Be careful not to drop the disc when it ejects If this does not work reset your unit Basic settings Enter PSM menu Cancel the display Set the clock demonstration SEL J Hold PA Select an item DEMO OFF Deactivate the display demonstration T Adjust the minute T Adjust the hour 1 EN OPERATIONS i gt Basic operations Control panel Remote sensor Check the current clock time other information Remote controller RM RK50 Turn on the power DO NOT expose to strong light See also CLK DISP of General settings PSM z E Installing battery Turn off the power Hold A h dlifth a Warning To prevent accidents and damage Attenuate tne soun ifthe ec JEA Lithium coin battery CR2025 Do not install any battery other than CR2025 or its power is on ee T Ee ame equivalent E Store out of reach of children AZ J WY Do not recharge short or dis
4. 3 8 F J 5x8 mm M5 x 3 8 Install the unit at an angle of Pocket f cm amd less than 30 Bracket ELECTRICAL CONNECTIONS J Make sure to disconnect the battery s negative terminal Ss l l e Be sure to ground this unit to the car s chassis again after installation High Note It is recommended to connect to the speakers with maximum power of more than 50 W both at the rear and at the front with an impedance of 4 0 to 8 0 If the maximum power is less than 50 W change AMP GAIN setting to prevent the speakers from being damaged see page General setting PSM of the INSTRUCTIONS Heat sink Typical connections Connecting the external amplifier or subwoofer Rear line out Rear ground terminal Remote lead Y connector Remote lead blue with white stripe Antenna te esl 15 Afuse Set L O MODE to REAR p m terminal QZ See General settings PSM You can connect a power amplifier for rear speakers To the remote lead of other equipment or automatic antenna if any i To the metallic body KD S15 Connect only the front speakers if your or chassis of the car Pr Ne wy l 4 i speaker system is two speaker system b 4 JVC Amplifier H Dab To a live terminal in the i i Rear La j Yellow 2 fuse block connecting to the i speakers Right i W car battery bypassing the i a ae Front speakers Front speaker left White ign
5. KD S15 JV dise CD RECEIVER INSTRUCTIONS INSTALLATION Daachabid DIGITAL AUDIO TEXT GET0561 001A J Thank you for purchasing a JVC product Please read all instructions carefully before operation to ensure your complete understanding and to obtain the best possible performance from the unit Installation connection are explained at the last section of this manual reverse page indicated with J symbol For customer Use Enter below the Model No and Serial No which are located on the top or bottom of the cabinet Retain this information for future reference Model No O508DTSMDTJEIN Serial No F EN 2 2008 Victor Company of Japan Limited Mh i INFORMATION For U S A Reorient or relocate the receiving antenna Caution XQ Changes or modifications not approved by JVC could void the user s authority to operate the equipment S This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference wi
6. Less than measurable limit E General Power Requirement Operating Voltage DC 14 4 V 11 V to 16 V allowance Grounding System Negative ground Allowable Operating Temperature 0 C to 40 C 32 F to 104 F Dimensions W x H x D Installation Size approx 182 mm x 52 mm x 160 mm 7 3 16 x 2 1 16 x 6 5 16 Panel Size approx 188 mm x 58mm x 5mm 7 7 16 x 2 5 16 x 1 4 Mass approx 1 3 kg 2 9 Ibs excluding accessories Design and specifications are subject to change without notice ra If a kit is necessary for your car consult your telephone D directory for the nearest car audio speciality shop Having TROUBLE with operation Please reset your unit Still having trouble Call 1 800 252 5722 USA ONLY http www jvc com aC You need the installation kits which corresponds to your car e Mark all the check boxes YJ to make sure you have follow the instructions and the listed parts Check the battery system in your car LI a fzv 12 V DC NEGATIVE ground Prepare this before installation TROUBLESHOOTING The fuse blows Are the red and black leads connected correctly e Power cannot be turned on s the yellow lead connected No sound from the speakers Is the speaker output lead short circuited Sound is distorted s the speaker output lead grounded Are the terminals of L and R speakers grounded in com
7. ator Cc Radio operations Disc operations Eject disc Press SRC to listen to another playback source Select preset station You can also use A to select preset station Press Select track number 01 06 o Select FM AM Press Go to the next or previous track Hold Select track number 07 12 Hold Fast forwards or reverses the track 2 Select the bands fM1 FM2 FM3 AM 6 Search for a station Auto Search a Turn on the power Manual Search Hold either one of the buttons until M flashes on the display then press it repeatedly 2 Insert disc All tracks will be played repeatedly until you change the source or eject the disc When an FM stereo broadcast is hard to receive o MODE 2 awo Reception improves but the stereo effect will be lost Selecting the playbackmodes peeanets Changing the display information Cu MO indicator lights up Ae Presan elle Lee ETO SW AEO To restore the stereo effect repeat the same procedure Z TRKRPT Plays the current track repeatedly 1 FM station automatic presetting SSM Strong station Sequential Memory RPTOFF Cancels Track title You can preset six stations for each band em ALLRND Plays all tracks of the current MODE disc at random Clock with the current track number 1 AD a 5 Hold EE _ ____RNDOFF __ Cancels The elapsed playi
8. emarks of Microsoft Corporation in the United States and or other countries SPECIFICATIONS gt E Audio amplifier section Power Output gg HMEN St 20WRMSx4Channels at4Qand Ae gt lt 1 THD N oes Signal to Noise Ratio aa 80 dBA reference 1 W into 4 0 Load Impedance 40 40 to 8 0 allowance Tone Control Range Bass 12 dB at 60 Hz Mid range 12 dB at 1 kHz Treble 12 dB at 7 5 kHz Frequency Response 40 Hz to 20 000 Hz Line Out Level Impedance 2 5 V 20 KQ load full scale Output Impedance 1kO Subwoofer Out Level Impedance 2 5 V 20 KQ load full scale E Tuner section Frequency Range FM 87 5 MHz to 107 9 MHz with channel interval set to 100 kHz or 200 kHz 87 5 MHz to 108 0 MHz with channel interval set to 50 kHz AM 530 kHz to 1710 kHz with channel interval set to 10 kHz 531 kHz to 1 602 kHz with channel interval set to 9 kHz FM Tuner Usable Sensitivity 11 3 dBf 1 0 uV 75 0 50 dB Quieting Sensitivity 16 3 dBf 1 8 uV 75 0 Alternate Channel Selectivity 400 kHz 65 dB Frequency Response 40 Hz to 15 000 Hz Stereo Separation 35 dB AM Tuner Sensitivity Selectivity 20 pV 35 dB PREPARATION E CD player section Type Compact disc player Signal Detection System Non contact optical pickup semiconductor laser Number of channels 2 channels stereo Frequency Response 5 Hz to 20 000 Hz Dynamic Range 93 dB Signal to Noise Ratio 98 dB Wow and Flutter
9. fter ejecting a disc NO DISC appears and you cannot operate some of the buttons Insert another disc or press SRC to select another playback source Playing a CD R or CD RW Use only finalized CD Rs or CD RWs This unit can play back multi session discs however unclosed sessions will be skipped while playing Some CD Rs or CD RWs may not be played back on this unit Discs are dirty or scratched Moisture condensation has occurred on the lens inside the unit The pickup lens inside the unit is dirty The files on the CD R CD RW are written using the Packet Write method There are improper recording conditions missing data etc or media conditions stained scratched warped etc CD RWs may require a longer readout time since the reflectance of CD RWs is lower than that of regular CDs MAINTENANCE gt How to clean the connectors To keep discs clean So Wipe in a straight line from center of disc to a Wipe the connectors with a cotton swab or cloth edge Do not use liquid cleaners thinners or benzene moistened with alcohol Connectors Moisture condensation Moisture may condense on the lens inside the unit Eject the disc and leave the unit turned on for a few hours until the moisture has evaporated To play new discs Remove any rough areas from the inner and outer edges of the disc Do not use the following discs Single CD 8 cm 3 3
10. ition switch constant Wes Al Set L O MODE to WOOFER ee General settings Ean 1 Not supplied for this unit 12V ie a Fuse block iyi oor You can also connect a subwoofer to 2 Before checking the operation of this unit prior to installation this i lead must be connected otherwise the power cannot be turned on White with black stripe Gray with black stripe S the REAR LINE OUT terminals To an accessory terminal in iE i i gt the fuse block i 3 Firmly attach the ground wire to the metallic body or to the chassis Front speaker right Gray i l H sVCAmplifier ke of the car to the place uncoated with paint if coated with paint i HE remove the paint before attaching the wire Failure to do so may Green with black stripe Blue with white Totheremotelesdor other Subwoofer cause damage to the unit sttipe equipment or automatic antenna if gt i i l 4 Signal cord not supplied for this unit any 200 mA max Rear speaker left Green PRECAUTIONS on power supply and speaker connections Purple with black stripe i lAa F d i o INSTALLATION CONNECTION
11. ll not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help IMPORTANT FOR LASER PRODUCTS 1 CLASS 1 LASER PRODUCT 2 CAUTION Do not open the top cover There are no user serviceable parts inside the unit leave all servicing to qualified service personnel 3 CAUTION For U S A Visible and or invisible class II laser radiation when open Do not stare into beam For Canada Visible and or invisible class 1M laser radiation when open Do not view directly with optical instruments 4 REPRODUCTION OF LABEL CAUTION LABEL PLACED OUTSIDE THE UNIT FRA PTCO ENG OPTIQUES European Union only Dx Do not raise the volume level too much as this will block outside sounds making driving dangerous Stop the car before performing any complicated operations Temperature inside the car If you have parked the car for a long time in hot or cold weather wait until the temperature in the car becomes normal before operating the unit
12. mantle Detach the panel T lt _ lt A SS 2 Do not dispose of in fire Do not carry around with other metallic materials Select the source Volume control ees 3 3 3 re s s 7 FM1 FM2 FM3 AM gt CD AUX IN For USA California Only This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate Display window Playback mode item indicator mi Features MO Lights up in monaural mode Turns the power on if pressed briefly or Selects the sound mode e ST Lights up when receiving an FM stereo attenuates the sound when power is on Yea iEQ intelligent equalizer Disc indicator broadcast with sufficient signal strength Turns the power off if pressed and held LOUD loudness indicator Changes the FM AM bands with A U lt JE Selects the source Tr track indicator C EQ equalizer indicator Changes the preset stations with D w Nek Zed Searches for stations if pressed briefly p J 3 ff piscp nr Re _ J _Wosiioun Ea A Fast forwards or reverses the track if Source display eB y y Vie pressed and held Track number La ai fo io i i e s w at Changes the track of the disc if pressed Volume level indicator Adjusts the volume level JVE i cato Main display time Sound mode iEQ intelligent equalizer Auehso briefly Time countdown indicator playback information indic
13. mon Noise interfere with sounds Is the rear ground terminal connected to the car s chassis using shorter and thicker cords This unit becomes hot s the speaker output lead grounded Are the terminals of L and R speakers grounded in common This unit does not work at all Have you reset your unit Parts list for installation and connection E E E E Control panel Sleeve Trim plate Power cord aN Ly iims LJ g 6 o gt E N3 Mounting bolt MNS T M4x 5 mm M4 x 1 4 QY Handles Remote controller amp Battery R2025 Washer 5 Lock nut M5 M5 x 12 5 mm M5 x 1 2 Rubber cushion ae we INSTALLATION J If you are not sure how to install this unit correctly consult your JVC car audio dealer In dash mounting Removing the unit lt Before removing the unit release the rear section When you stand the unit be careful not to damage the fuse on the rear Dothe required electrical connections Bend the appropriate tabs to hold the sleeve firmly in place When using the optional stay When installing the unit without using the sleeve Fire wall Stay option In a Toyota car for example first remove the car radio and install the unit in its place Flat type screws M5 x 8 mm M5 x 3 8 Not supplied for this unit on 8 mm 3 8 8 mm 3 8 a Tl SOP SS Flat type screws i D Pee M5 x 8 mm M5 x
14. ng time with the current track number Skipping a track quickly during play H je i H H VA Manual presetting Example Select track 32 If the current disc is an audio CD NO NAME appears Example Storing the FM station of 92 5 MHz into preset number 4 of the FM1 band inne FN Prohibiting disc ejection 1 2 AD 3 o Cu gt You can lock a disc in the loading slot Track 109 107 p Track 31 gt El rr FMI FM2 FM3 AM b D b 25 a E a CL na Disc title gt performer NN To cancel the prohibition repeat the same procedure You can connect an external component to the AUX auxiliary input jack on the control panel o 2 Turn on the connected Portable audio player etc component and start i playing the source E Sound adjustments E Adjusting the sound LOUD loudness Boost low and high frequencies to LOUD ON or produce a well balanced sound at LOUD OFF USER ROCK CLASSIC cn p fw alow volume level L JAZZ HIP HOP POPS O e sas mo me 0 POr I VOL SUB W LOUD BAL SUB W subwoofer Adjust the subwoofer output level Preset values pac MID TRE Indication For bass mid range treble VOL volume Adjust the volume USER Fatsoind o o 0 ROCK Rock or disco music CLASSIC Classical music POPS Light music HIP HOP F
15. unk or rap music JAZZ Jazz music 00 to 08 00 to 50 or 00 to 30 gt LOUD loudness BAS bass Adjust the bass MID mid range Adjust the middle frequencies sound level TRE treble Adjust the treble FAD fader Adjust the front and rear speaker balance BAL balance Adjust the left and right speaker balance 060106 1 Displayed only when L O MODE is set to WOOFER SS 2 When you adjust the bass mid range or treble the adjustment you have made 06 to 06 is stored for the currently selected sound mode iEQ including USER R06 to F06 3 Ifyou are using a two speaker system set the fader level to 00 106 to R06 w a E LOUD ON LOUD OFF will be applied to all sound modes iFQ 5 Depending on the amplifier gain control setting OFF See reverse page E General settings PSM Indication Item ___ Initial Setting DEMO DEMOON The display demonstration will be activated automatically if no operation is done for about 20 seconds Cancels DEMO OFF CLK DISP The clock time is shown on the display at all times when the power is turned off Cancels pressing DISP will show the clock time for about 5 seconds when the power is turned off CLOCK H Hour Initial 1 1 00 CLOCK M Minute Initial 00 1 00 DIMMER Dims the display and button illumination Cancels SCROLL Scrolls the displa
16. yed information once Repeats scrolling at 5 second intervals Cancels Pressing DISP for more than one second can scroll the display regardless of the setting L 0 MODE REAR WOOFER WOOFER Select if the REAR LINE OUT terminals are used for connecting the speakers through an external amplifier Select if the REAR LINE OUT terminals are used for connecting a subwoofer Frequencies lower than 90 Hz are sent to the subwoofer Frequencies lower than 135 Hz are sent to the subwoofer Frequencies lower than 180 Hz are sent to the subwoofer AUX ADJ Adjust the auxiliary input level to avoid the sudden increase of the output level when changing the source from external component connected to the AUX input jack on the control panel AMP GAIN LOW PWR VOL 00 VOL 30 Select if the maximum power of each speaker is less than 50 W to prevent the speaker from being damaged HIGH PWR VOL00 VOL50 AREA AREA US When using in North Central South America AM FM intervals are set to 10 kHz 200 kHz When using in any other areas AM FM intervals are set to 9 kHz 50 kHz 100 kHz during auto search When using in South American countries AM FM intervals are set to 10 kHz 100kHz AREA EU AREASA 1 Ifthe power supply is not interrupted by turning off the ignition key of your car it is recommended that you select OFF to save the car s battery 2 Displayed only when L 0 MODE
Download Pdf Manuals
Related Search