HP 002-01A Backup and Recovery
Contents
1. jo m ge rding the recovery file to disc 10d one There are two methods for writing the VDRS iso file to disc This first method takes a little longer but it allows for write verification so you are assured your disc works and the data is verified 1 Click the Windows Start Button and then click All Programs 2 Click CyberLink Power2Go and then click Power2Go 2 System Recovery 3 In the Disc Type field select DVD and then click OK The Power2Go window opens 4 In the Select Source field find and select the VDRS iso file 5 In the main menu at the top of the window select Burning and then click Burn Disc Image A Burn Disc Image window opens 6 In the From field browse to and select the VDRS file and then click Open 7 Place a check mark in the Verify recorded data check box and then click Burn 8 When prompted insert a DVD in the disc drive A window opens showing burning and verification progress 9 When the message Burn disc image Completed Successfully appears click OK The DVD ejects automatically With a permanent pen mark it clearly as your system recovery disc and place it in a secure storage place This method is a little faster but it does not allow for write verification 1 Double click the VDRS iso file A disc recording window opens 2 Inthe From field select the desktop VDRS iso file Click Open and then click Burn 3 Insert a writable DV2. want to install Windows 7 If itis not already highlighted select System Drive by using the up arrow and down arrow keys Ensure the partition associated with Recovery is not selected 8 Click Drive Options in the lower right area of the window CAUTION All data on the hard disk drive will be deleted in the next step You will lose data if it is not backed up 4 System Recovery 9 Ensure System Drive is still highlighted and the Recovery partition is not and then click Delete A window opens asking whether you are sure you want to delete 10 Click OK Note the partition you deleted now shows Unallocated Space 11 Click Next A window opens showing installation progress 12 Wait while the computer prepares the desktop 13 Proceed to the Post recovery procedure on page 7 This section describes how to perform a system recovery from the system recovery disc you made 1 Insert the recovery disc you made in the disc drive 2 Shut down the computer If you do not have access to the desktop press and hold the On button on the computer to shut down 3 Press the On button to turn on the computer 4 When the HP logo screen appears press the Delete key on the keyboard repeatedly until the logo screen disappears NOTE Some operations may be slightly different depending on your motherboard 5 From the main menu at the top of the window use the left arrow and right arrow keys on your keybo
3. D into the disc drive when you are prompted A window opens showing burning progress 4 In the window indicating a successful burn click OK The DVD ejects automatically With a permanent pen mark it clearly as your system recovery disc and place it in a secure storage place CAUTION All data on the hard disk drive will be deleted in the next procedures You will lose data if it is not backed up System recovery After you try restarting your computer and reinstalling problem software you can run system recovery as a last resort to reinstall the factory installed operating system software programs and hardware drivers The system recovery process completely erases and reformats the hard disk drive deleting all data files you created since purchase It then reinstalls the operating system programs and drivers You must reinstall any software that was not installed on the computer at the factory This includes software that came on CDs included in the computer accessory box and software programs you installed after purchase Which recovery option to choose Attempt a system recovery in the following order 1 Through the Windows Vista Start menu 2 By pressing the space bar on the keyboard during startup if you cannot get to the desktop 3 From the system recovery disc you made 4 From the Windows OS disc included with your computer Recovery from the recovery partition on your hard disk drive Choose one
4. System Drive is highlighted and the Recovery partition is not and then click Delete A window opens asking whether you are sure you want to delete 10 Click OK Note the partition you deleted now shows Unallocated Space 11 Click Next A window opens showing installation progress 12 Wait while the computer prepares the desktop 13 Proceed to the Post recovery procedure on page 7 System Recovery 3 If Windows Vista is not responding but the computer is working complete the following steps to perform a system recovery 1 Turn off the computer If necessary press and hold the On button on the computer until the computer turns off 2 Disconnect all peripheral devices from the computer except the monitor keyboard and mouse 3 Press the On button to turn on the computer 4 When the HP logo screen appears press the space bar on the keyboard repeatedly and continue to do so until the Boot Manager window opens By default Microsoft Windows Vista is highlighted as the source from which the computer should start boot 5 Use the up arrow and down arrow keys on the keyboard to select Recovery Partition it should now be highlighted and then press Enter on the keyboard A window opens showing file download progress 6 In the registration window type your product key number found on the Certificate of Authenticity sticker on your computer and then click Next A window opens asking where you
5. VEE BLACKBIRD O00 III III III IT TI IT AAA TI IT I I I I I I I I I I Y GAMING SYSTEM System Recovery Should your system fail or become corrupted you have options You might be able to recover your system from the recovery partition on the hard disk drive from a recovery disc you made before the system failed or from the Microsoft Windows Vista operating system OS disc included with your computer Recovery methods are described here after the instructions for making your own recovery disc Making a system recovery disc One of the first things you should do when you purchase a new computer is make a system recovery disc This disc can be used in the event of a system crash where your system stops working altogether or if your system becomes corrupted If this happens and you do not have a recovery disc it may be impossible to recover your system With this procedure you create a disc from the recovery image on your hard disk drive This image contains the operating system and software files originally installed on your computer at the factory Creating the recovery file First you create a recovery file that you record or burn to a disc 1 Click the Windows Start Button 3 and then click All Programs 2 Click HP Tools and Support and then click Create Recovery DVD A window opens showing a progress bar The creation process can take up to 15 minutes An iso file VDRS iso is created on your desktop
6. allocated Space 11 Click Next A window opens showing installation progress 12 Wait while the computer prepares the desktop 13 Optional Use the first part of this procedure to reverse the boot order again to associate the Ist Boot Device with the hard disk drive 14 Proceed to the Post recovery procedure on page 7 This section describes a system recovery with the Windows Vista operating system disc included with your computer If you recover with this method your system will not have the custom drivers and software originally installed at the factory For this method you need to know the edition of Windows Vista you have for example Premium or Ultimate or the product key number found on the Certificate of Authenticity sticker on your computer 1 With the computer on insert the Microsoft Windows Vista system recovery disc included with your computer in the disc drive tray 2 Shut down the computer If you do not have access to the desktop press and hold the On button on the computer to shut down 3 Press the On button to turn on the computer 4 When the HP logo screen appears press the Delete key on the keyboard repeatedly until the logo screen disappears NOTE Some operations may be slightly different depending on your motherboard 5 From the main menu at the top of the window use the left arrow and right arrow keys on your keyboard to select Boot 6 Use the up arrow and down arrow key
7. ard disk drive will be deleted in the next step You will lose data if it is not backed up 6 System Recovery 14 Ensure System Drive is still highlighted and the Recovery partition is not and then click Delete A window opens asking whether you are sure you want to delete 15 Click OK Note the partition you deleted now shows Unallocated Space 16 Click Next A window opens showing installation progress 17 Wait while the computer prepares the desktop 18 It is critical now to install custom software programs and hardware drivers next Follow the instructions in the next procedure using the Application and Driver Recovery disc included with your computer plication and Driver Use the Application and Driver Recovery disc you received with your computer to install custom software programs and hardware drivers Look on the Web for updates to the custom installations You must turn off User Account Control UAC before you install the software and drivers To turn off UAC 1 Click the Windows Start Button and then click Control Panel 2 Click User Accounts and Family Safety User Accounts and then click Turn User Account Control on or off 3 Remove the check mark from the Use User Account Control UAC to help protect your computer check box and then click OK 4 Restart the computer when prompted Next use the Application and Driver Recovery disc to install important software and drivers 1 Insert th
8. ard to select Boot 6 Use the up arrow and down arrow keys to select Boot Device Priority and then press Enter on the keyboard Next you associate Ist Boot Device with CDROM To do so 1 Ensure 1st Boot Device is selected and press Enter 2 Inthe submenu that appears use the arrow keys to move the black marker on the right of the boot devices to CDROM Press Enter Note that Ist Boot Device is now associated with CDROM 3 Press F10 on the keyboard 4 Ensure Yes is selected and press Enter to save configuration changes The system automatically restarts from the disc drive 5 Press 3 on the keyboard to select Disaster Recovery and then press Enter A window opens showing file loading progress 6 In the registration window type your product key number found on the Certificate of Authenticity sticker on your computer and then click Next A window opens asking where you want to install Windows 7 If itis not already highlighted select System Drive by using the up arrow and down arrow keys 8 Click Drive Options in the lower right area of the window CAUTION All data on the hard disk drive will be deleted in the next step You will lose data if it is not backed up 9 Ensure System Drive is still highlighted and the Recovery partition is not and then click Delete A window opens asking whether you are sure you want to delete 10 Click OK Note the partition you deleted now shows Un
9. e Application and Driver Recovery disc in the disc drive tray 2 View the contents of the supplemental disc 3 Click the top folder Install Me First The HP System Information Utility within this folder must be installed first before any other software programs or hardware drivers can be installed 4 Click HP System Information Utility to view its folder contents 5 Double click the Install bat file The System Information Utility loads 6 Open each folder that contains the software or driver you want to install and double click the exe file within each folder Installation files are generally named Setup exe or install exe 7 Proceed to the Postrecovery procedure Post recovery procedure After system recovery your computer is as it was when it left the factory Configure the system now to your needs 1 Turn off the computer reconnect all devices that were originally connected to it and then turn on the computer 2 Configure your Internet connection 3 Reinstall the software that originally came in the box with the computer and any additional software you purchased If you installed updates to any software programs or hardware drivers reinstall them as well You can typically download these updates from the manufacturer s Web site 4 Use Windows Update to get critical updates from Microsoft a Click the Windows Start Button and then click Control Panel b Under Security click Chec
10. k for Updates c Click Install Updates to download and install updates 5 Restart the computer Some updates will not finish installing until you restart 6 If you performed a backup before the system recovery copy the backup data files from the backup media to the hard disk drive 7 Ensure your system is running up to date security software The information contained herein is subject to change without notice Copyright 2007 Hewlett Packard Development Company L P System Recovery 7 Part number 5992 2511
11. of the following procedures to reinstall the operating system and software from the recovery image on your hard disk drive m Recovery from the Windows Start Menu if you can see your desktop m Recovery if you cannot get to the desktop NOTE System recovery deletes all data and programs you created or installed after purchase Ensure you have backed up to a removable disc or external hard disk any data you want to keep Recovery from the Windows Start Menu If the computer is working and Windows Vista is responding follow these steps to perform a system recovery 1 Turn off the computer 2 Disconnect all peripheral devices from the computer except monitor keyboard and mouse 3 Turn on the computer 4 Click the Windows Start Button All Programs HP Tools and Support and then click Boot to Recovery 5 Follow the onscreen prompts If the system does not automatically restart restart it when prompted A window opens showing file loading progress 6 In the registration window type your product key number found on the Certificate of Authenticity sticker on your computer and then click Next A window opens asking where you want to install Windows 7 If itis not already highlighted select System Drive 8 Click Drive Options in the lower right area of the window CAUTION All data on the hard disk drive will be deleted in the next step You will lose data if it is not backed up 9 Ensure
12. s to select Boot Device Priority and then press Enter on the keyboard Next you associate Ist Boot Device with CDROM To do so 1 Ensure 1st Boot Device is selected and press Enter 2 Inthe submenu that appears use the arrow keys to move the black marker on the right of the boot devices to CDROM Press Enter Note that Ist Boot Device is now associated with CDROM 3 Press F10 on the keyboard System Recovery 5 4 Ensure Yes is selected and press Enter to save configuration changes The computer automatically restarts 5 Press any key on the keyboard when prompted You must press a key while the message is onscreen A window opens showing file loading progress 6 Choose which language to install and other preferences and then click Next 7 In the Install Windows window click Install Now 8 In the registration window type your product key number found on the Certificate of Authenticity sticker on the computer and then click Next 9 Select the edition of Windows you purchased and then click Next If you entered your product key number Windows automatically determines which edition you have 10 Accept the license terms by placing a check mark in the check box and then click Next 11 Click Custom Advanced install 12 In the next window use the up arrow and down arrow keys to select System Drive 13 Click Drive Options in the lower right area of the window CAUTION All data on the h
Download Pdf Manuals
Related Search