Harbor Freight Tools 94665 User's Manual
Contents
1. 20 Maintenance For your safety service and maintenance should be performed regularly by a qualified technician 21 Use tools with both hands when required Many tools such as chain saws drills etc require the use of both hands when operating This helps maintain tool stability and keeps hands away from the working area of the tool 22 Always follow all the instructions and warnings of the tool used with this Saw Set Product Specific Safety Precautions 1 Be sure to use the correct size Arbor for the Hole Saw size selected It must fit exactly not loose Use work gloves when handling Hole Saws 2 Selecta drilling tool not provided with sufficient power to turn the Hole Saws and cut into hard woods The drilling tool must have a chuck that is in good condition and able to hold the Hole Saw Arbor tight Loose fittings can damage the tool and possibly lead to serious injury 3 When cutting a hole with the Hole Saw hold the drilling tool with both hands and always 90 degrees to the stock being cut Make sure your work area is secure while using Hole Saw 4 Do not use excessive pressure on the drilling tool when cutting a hole Allow the Hole Saw to do the work Excessive pressure can damage the Hole Saw and drilling tool Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that comm2. DRILL L MASTER 18 PIECE HOLE SAW SET W 194665 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements actual product may differ slightly from the product described herein Distributed Exclusively by 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2006 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specifications litem Description Saw Sizes 5 4 3 1 2 3 2 1 2 2 1 3 4 1 1 2 1 1 4 1 1 8 1 3 diameters Pilot Drill Bit Size 15 64 2 4 Ibs Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using tool basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this tool 1 Keep work area clean Cluttered areas invite injuries 2 Observ
3. AT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 94665 For technical questions please call 1 800 444 3353 Page 6
4. e work area conditions Do not use machines or power tools in damp or wet locations Don t expose to rain Keep work area well lighted Do not use electrically powered tools in the presence of flammable gases or liquids 3 Keep children away Children must never be allowed in the work area Do not let them handle machines tools or extension cords 4 Store idle equipment When not in use tools must be stored in a dry location to inhibit rust Always lock up tools and keep out of reach of children 5 Use the right tool for the job Do not attempt to force a small tool or attachment to do the work of a larger industrial tool There are certain applications for which this tool was designed It will do the job better and more safely at the rate for which it was intended Do not modify this tool and do not use this tool for a purpose for which it was not intended 6 Dress properly Do not wear loose clothing or jewelry as they can be caught in moving parts Protective electrically non conductive clothes and non skid footwear are recommended when working Wear restrictive hair covering to contain long hair SKU 94665 For technical questions please call 1 800 444 3353 Page 2 10 11 12 13 14 15 16 17 18 Use eye and ear protection Always wear ANSI approved impact safety goggles Wear a full face shield if you are producing metal filings or wood chips Wear an ANSI approved dust mask or respirator when working ar
5. ing tool is a variable speed type start cutting the stock slowly until the circle groove is made in the stock Then cut faster 9 When the hole is cut release the trigger switch and wait for Hole Saw to come to acomplete stop before removing it from the stock 10 Remove Hole Saw from drilling tool chuck Small Arbor 13 Arbor Nut Bracket 17 Large Arbor 14 SKU 94665 For technical questions please call 1 800 444 3353 Page 5 Maintenance 1 Clean the Hole Saw after use using a cloth and light oil to prevent rust 2 Store the Holes Saws and Arbors in the Blow Mold case Keep in a clean and dry location Parts List ipti Description Qty 1 1 8 Hole Saw 3 4 Hole Saw Small Arbor 14 Hole Saw 15 Bit Drill 15 64 3 4 Hole Saw 16 Hex Key 3 32 1 1 2 Hole Saw 17 NOTE Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Tem 5 18 4 Hole Saw 3 Parts Photo 1 5 6 8 4 eece 10 11 12 18 Blow Mold o ai Case not shown 14 16 17 oa gt D 15 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR TH
6. on sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking check to make sure that all the parts are included Refer to the Parts List and Parts Photo located at the end of this manual If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual SKU 94665 For technical questions please call 1 800 444 3353 Page 4 Operation 1 Select the desired size Hole Saw 2 Select the Large or Small Arbor for the Hole Saw The correct size Arbor will fit exactly into the Hole Saw The larger Hole Saws also require the use of the Bracket 17 and Drill Bit 15 See photos below 3 Using a wrench not supplied loosen the Arbor nut and remove the lower half of the Arbor Place the lower half of the Arbor into the hole in the Hole Saw Screw in the Arbor Nut into the top of the Hole Saw 4 Using a wrench not supplied tighten the Arbor nut completely To avoid having to hold the sharp cutting edge of the Hole Saw while tightening place and hold a small screwdriver through the holes in the side of the Hole Saw 5 Open the jaws of the drilling tool chuck not supplied 6 Place the Arbor shaft completely into the chuck and securely tighten the chuck 7 Holding the drilling tool at 90 degrees to the stock set the Hole Saw on the stock 8 Press the drilling tool trigger switch to turn it on If the drill
7. ound metal wood and chemical dusts and mists Do not overreach Keep proper footing and balance at all times Do not reach over or across running machines Maintain tools with care Keep tools sharp and clean for better and safer performance Follow instructions for lubricating and changing accessories Inspect tool cords periodically and if damaged have them repaired by an authorized technician Disconnect power Unplug drilling tool not supplied when not in use Remove adjusting keys and wrenches Check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging in drilling tool not supplied Avoid unintentional starting Be sure the switch of the drilling tool not Supplied is in the Off position when not in use and before plugging in Do not carry any tool with your finger on the trigger whether it is plugged in or not Stay alert Use common sense Do not operate any tool when you are tired Take caution as some woods contain preservatives such as copper chromium arsenate CCA which can be toxic When cutting these materials care should be taken to avoid inhalation and minimize skin contact Check for damaged parts Before using any tool any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment and binding of moving parts any broken parts or mounting fixtures and any other condition
8. that may affect proper operation Any part that is damaged should be properly repaired or replaced by a qualified technician Do not use a drilling tool not supplied if any switch does not turn On and Off properly Guard against electric shock Prevent body contact with grounded surfaces such as pipes radiators ranges and refrigerator enclosures Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty Only use accessories intended for use with this tool Approved accessories are available from Harbor Freight Tools Do not operate if under the influence of alcohol or drugs Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not operate the tool SKU 94665 For technical questions please call 1 800 444 3353 Page 3 19 Use proper size and type extension cord If an extension cord is required it must be of the proper size and type to supply the correct current to the drilling tool not supplied without heating up Otherwise the extension cord could melt and catch fire or cause electrical damage to the tool Longer extension cords require larger size wire Refer to the drilling tool operator s manual for specific extension cord requirements If you are using a drilling tool outdoors use an extension cord rated for outdoor use signified by WA on the jacket
Download Pdf Manuals
Related Search