Emerson LK36 Owner's Manual
Contents
1. Make certain no bare wires are exposed outside the wire connectors All wiring must conform to national and local electrical codes Follow the recommended instructions for the proper method of wiring your new light fixture If you feel you do not have enough electrical wiring knowledge or experience have your light fixture installed by a licensed electrician Any electrical work not described in this manual should be performed by a licensed electrician WARNING To reduce the risk of possible fire and electrical shock install only on Emerson CF and F Series Ceiling Fans This light kit is not to be used with CF652 CF653 CF670 and CF742 Model Ceiling Fans installed in damp or wet locations Assembly and Installation 4 WARNING Do not install or use the light fixture if any part is missing or damaged Call toll free 1 800 654 3545 Installation on Emerson Fans Having A Modular Switch Cup with Center Screw 1 Remove all parts and parts packages from the carton 2 Remove the switch cup 1 from the cover plate 2 by removing the three screws 3 around the side of the switch cup Figure 1 3 Disconnect the motor connector 4 from the switch cup connector 5 Figure 1 4 WARNING To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring 4 Remove the center screw 6 from the switch cup Figure 1 5 Carefully l2. avoid damage in transit since we will not be responsible for any such damage What Is Not Covered This warranty also does not cover any defects malfunctions or failures caused by e Repairs by persons not authorized by Emerson Electric Co e Use of parts or accessories not authorized by Emerson Electric Co e Mishandling improper installation modifications or damage to your light fixture while in your possession or e Unreasonable use misuse abuse including failing to do reasonable and necessary maintenance and normal wear and tear Additionally this warranty and any implied warranty of merchantability or fitness for a particular purpose are voided when e The original purchaser or user ceases to own the product or e The ceiling fan is moved from its original point of installation This warranty is only valid within the 50 states of the United States and the District of Columbia No other written or oral warranties apply and no employee agent dealer or other person is authorized to give any warranties on behalf of Emerson Electric Co REPAIR REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE UNDER THIS WARRANTY AND EMERSON IS NOT RESPONSIBLE FOR DAMAGES OF ANY KIND INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES Incidental damages include but are not limited to such damages as loss of time and loss of use Consequential damages include but are not limited to the cost of repairing or replacing other property which was da
3. covered What The Period Of Coverage Is All components are covered by this warranty for one year from the date you purchased your light fixture ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE MADE WITH RESPECT TO COMPONENTS AND ACCESSORIES IS ALSO LIMITED TO ONE YEAR What Will Emerson Electric Co Do To Correct Problems Emerson Electric Co will replace a defective Emerson Light Fixture at no charge to you WE WILL SHIP THE REPAIRED PRODUCT OR REPLACEMENT TO YOU AT NO CHARGE BUT YOU ARE RESPONSIBLE FOR ALL COSTS OF REMOVAL REINSTALLATION AND SHIPPING OF THE PRODUCT TO EMERSON How Can You Get Service YOU MUST HAVE PROOF OF YOUR PURCHASE OF THE LIGHT FIXTURE TO OBTAIN LIMITED WARRANTY SERVICE KEEP YOUR RECEIPT OR OTHER PROOF OF PURCHASE You can return the product to our factory or to your nearest authorized service center e To return the product to the factory obtain a return authorization and service identification tag by writing to Air Comfort Products Division of Emerson Electric Co 8100 W Florissant Ave St Louis MO 63136 Include all model numbers shown on the product with your request e To return the product to an authorized service center call 1 800 654 3545 for the address of the nearest authorized service center You will be responsible for all insurance freight or other transportation charges to our factory or authorized service center Your Emerson Light Fixture should be properly packed to
4. 4 Insert the black and white wires through the lockwasher 8 and hex nut 7 Installation of Glass Shades supplied Firmly tighten the hex nut to 1 To install the shade 1 back the secure the light kit fixture to the switch knurled screws 2 out until the shade housing cover 5 neck slips into the holder 3 Figure 6 Then tighten the screws 2 until the 5 Carefully locate the white and blue three screws touch the neck with the switch housing and remove the wire outside Never use a screwdriver or connectors 3 from the wires pliers to tighten screws against the shade or a broken or damaged shade 6 Connect the white wire from the ceiling will most surely result fan to the white wire of the light fixture Connect the blue wire from the ceiling NOTE It is advisable to periodically fan to the black wire of the light fixture check the tightness of the knurled Use listed wire connectors 3 provided screws Fan operation may loosen to make connections Figures 4 and 5 these screw 2 CFSLK1 amp CFSLKPF Install a 100 A WARNING watt maximum medium base bulb into c gt F _ e NA the fixture socket 3 All Other Models Install a 60 watt maximum medium base bulb into each fixture socket A WARNING To avoid possible fire hazard do not exceed the wattage indicated on the light fixture To avoid possible fire or electrical shock make certain no bare wire strands are exposed outside wire connect
5. E SAME AS THE ONE IN THIS ILLUSTRATION HOWEVER IT INSTALLS IN A SIMILAR MANNER Figure 2 c gt A To avoid possible fire or electrical shock make certain no bare wire strands are exposed outside wire connectors Figure 3 A WARNING To avoid possible electrical shock be careful not to pinch wires between the switch cup 1 and the cover plate 2 11 Position the cup light fixture 1 7 on the cover plate 2 and install the three screws 3 that were previously removed in step 2 and tighten securely 12 Proceed to Installation of Glass Shades Globes section Installation on Emerson Fans Having Two Piece Die Cast Switch Housings 1 Remove all parts and parts packages from carton A WARNING To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring 2 Remove the cover 5 from the fan switch housing 1 by removing the two outer screws 2 See Figure 4 3 Remove the center screw 4 in the switch housing cover 5 Insert the black and white wires from the light fixture 6 thru the hole and thread the switch housing cover tightly onto the light fixture See Figure 4 NOTE YOUR FIXTURE MAY NOT LOOK THE SAME AS THE ONE IN THIS ILLUSTRATION HOWEVER IT INSTALLS IN A SIMILAR MANNER 1 SWITCH HOUSING ASSEMBLY SWITCH CHAIN 8 WIRE BLUE WIRE NNECTORS BLACK WIRE WHITE WIRES 7 HEX N
6. UT 5 COVER 8 LOCKWASHER 2 SCREWS LS 6 LIGHT FIXTURE E 4 CENTER Figure 4 SCREW
7. maged if this product does not work properly How State Law Relates To The Warranty Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Form No F40BP71300008 Part No BP7130 8 U L Model No CFMLK4 LK36 CFSLK1 CFSLKPF CFFC4 F440 F460 F465 F330 4 WARNING Safety Instructions WARNING To avoid fire shock and serious personal injury follow all instructions carefully 1 Read your Owner s Manual carefully before installing the light fixture Retain Owner s Manual for future reference 2 Be careful of the fan and blades when cleaning painting or working near the fan Before installing or servicing the light fixture or ceiling fan switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally When the service disconnecting means cannot be locked securely fasten a warning device such as a tag to the service panel Use medium base bulbs of the wattage indicated on the fixture Do not exceed the indicated wattage Do not use as a Ceiling fixture ADDITIONAL SAFETY INSTRUCTIONS FOR INSTALLATION To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring
8. ocate the white and blue wires labeled either L or LIGHT in the switch cup and remove the wire connectors from the wires 6 Insert the black and white wires from the light fixture 7 through the center hole in the switch cup Figure 2 and thread the switch cup onto the light fitter Hold wires taut while installing switch cup to prevent the wires from twisting Tighten the fitter until the fan switch chain aligns with the bushing in side of fitter 7 Insert the black and white wires through the lockwasher 8 and the hex nut 9 supplied Firmly tighten the hex nut to secure the light fixture to the switch cup 2 COVER PLATE 4 MOTOR CONNECTOR ae 5 SWITCH CUP 3 SCREWS CONNECTOR FAN SWITCH 1 SWITCH CHAIN CUP 6 CENTER SCREW Figure 1 8 Connect the white wire from the switch cup to the white wire of the light fixture Figure 2 Connect the blue wire from the switch cup to the black wire of the light fixture Use listed wire connectors previously removed in step 5 to make connections Figures 2 and 3 9 Carefully tuck all wires and splices into the switch cup 1 Figure 2 10 Connect the motor connector 4 to the switch cup connector 5 2 COVER PLATE 5 SWITCH CUP CONNECTOR 4 MOTOR CONNECTOR 6 WIRE CONNECTORS WHITE WIRES FAN SWITCH CHAIN BLUE WIRE BLACK WIRE 3 SCREWS 7 7 LIGHT FIXTURE NOTE YOUR FIXTURE MAY NOT LOOK TH
9. ors Figure 5 7 Carefully tuck all wires and splices into the switch housing 1 Figure 4 4 WARNING To avoid possible electrical shock 4 Installation is complete Turn on power at main fuse or circuit breaker box 3 HOLDER 2 KNURLED SCREW 3 PER SHADE be careful not to pinch the wires between the switch housing 1 and the cover 5 1 PER 8 Attach the cover light fixture 5 6 to the housing 1 using the two screws 2 that were removed in step 2 Figure 4 9 Proceed to Installation of Glass Figure 6 Shades section For repair parts phone 1 800 654 3545 1 GLASS SHADE w UON S EMERSON Air Comfort Products DIVISION OF EMERSON ELECTRIC CO 8100 W Florissant St Louis MO 63136 Part No BP7130 8 Form No F40BP71300008 Printed in China 03 09 LIGHT BULB SOCKET READ AND SAVE THESE INSTRUCTIONS THIS OWNER S MANUAL COVERS THE CF AND LK SERIES LIGHT FIXTURES AND THE CF AND F SERIES LIGHT FITTERS USE THESE FIXTURES ONLY WITH EMERSON CF AND F SERIES CEILING FANS NOTE ANY LIGHT KIT OR FITTER AND GLASS COMBINATION COVERED BY THIS MANUAL WEIGHS 7 5 LBS OR LESS Ss Ceiling Fan Light Fixture EMERSON Owner s Manual LIMITED WARRANTY What The Warranty Covers All products covered by this Owner s Manual are warranted against all defects in workmanship and materials You must be the original purchaser or user of the product to be
Download Pdf Manuals
Related Search