Cub Cadet SERIES 1000 User's Manual
Contents
1. Series 1000 and 1500 2 NEW HOOD DESIGN 2 1 Early 1000 and 1500 Series tractors used a vari ety of steel hoods and side panels Later ones resembled those used on the 2000 and 2500 Series tractors 2 2 The hood presently used on the 1000 series tractors is a molded 1 piece design See Figure 2 2 Figure 2 2 2 3 The 1000 Series hood opens from the back See Figure 2 3 d Figure 2 3 Series 1000 and 1500 2 4 The 1000 Series hood can be easily removed e A pair of gas charged cylinders provide lift assist See Figure 2 4 See Figure 2 5 Gas lift Cylinders 7 Ly a yy o a Figure 2 5 Figure 2 4 2 6 Anew spring loaded latch was added to hold the Disconnect the headlight wires hood closed See Figure 2 6 Release the retaining springs e Align the bolts in the hood with the slots in the hinge e Lifting the hood off of the tractor 2 5 The hood used on the 1500 Series tractors for 2005 and 2006 is more substantial than that used on the 1000 Series It is a one piece molded design very similar to the one used on the much larger 5000 and 6000 series tractors See Figure 2 5 Figure 2 6 Figure 2 5 e It opens from the front Series 1000 and 1500 2 7 A torsion spring keeps the latch secure until the 3 2 Disconnect headlight harness plugged secured lower pivot latch is intentionally pulled up to to hood lift cylinder See Figure 3 2 open the hood See Figure 2 72. one s Headlight Harness Figure 3 2 Figure 2 7 3 3 Remove the air deflector baffle using a 3 8 2 8 The hood latches to a sturdy rod that is mounted wrench See Figure 3 3 to the front of the frame See Figure 2 8 Figure 3 3 Figure 2 8 3 4 Support the hood as it is being loosened 3 HOOD PANEL REMOVAL 1500 SERIES NOTE Use this procedure if the hood alone is to be removed Typical reasons might include replacement because of damage to the hood or to ease access for other service 3 5 Separate hood from hinge using a 3 8 wrench 3 6 Lift hood off of tractor 3 1 Disconnect ground cable from battery using a 7 16 wrench
Download Pdf Manuals
Related Search