Fujitsu Intel Xeon E5-2603 v3
Contents
1. annel required if 2nd CPU is configured Bank black sockets Bank Il Data Mirror Data Mirror Data Mirror bata Mirror blue sockets Bank III Data Mirror Data Mirror Data Mirror bata Mirror green sockets 1st XEON CPU 4 14 Core Mirrored Channel Mode requires identical modules on channel C D 1st CPU or channel E F G and 2nd CPU 50 of the capacity is used for the mirror gt the available memory for applications is only half of the installed memory If this mode is used a multiple of 4 identical modules has to be ordered 3 Performance Channel Mode ta o a c c c c c c c c 5 o o rexuirea LI required if 2nd CPU is configured Channel E Channel F Channel G Channel H Bank black sockets Banki Data Data Data Data Data Data Data Data EG optiona any type blue sockets Bank Ill Data Data Data Data Data Data Data Data green sockets optional same type in Bank per CPU 1st XEON CPU 4 14 Core 2nd XEON CPU 4 14 Core Performance Channel Mode requires identical modules on all channels of each Bank per CPU If this mode is used a multiple of 4 identical modules has to be ordered Fujitsu Technology Solutions x86 PRIMERGY Server 12 of 30 System configurator and order informatio2. PRIMERGY RX2540 M1 o 526361 2735 111 No Rackmount Kit option Only for loose deliveries No mounting in racks possible max 1x per system telescopic drop in rails 781mm no support brackets needed 26361 F2735 E71 Lateral cable management for 2U servers or higher for asymmetrical racks PRIMECENTER S2 or M1 1 bracket PC Rack asym 1x per system SNP SY F1647E301 P Installation ex works for one server or subsystem Hereby the rack will be delivered completely pre mounted and all wired connections are tested With PCR M1 16U 24U 42U Systems and components will be delivered installed in the rack To be ordered only together with a PRIMECENTER rack PCR S2 e g S26361 K826 V10x new PCR M1 e g S26361 K827 Vxxx refer PCR S2 or M1 rack configurator max 1x per System Rack Cable Management Arm CMA 2U for symmetrical racks M1 or 3rd party racks Fujitsu racks 1x per system Rack mounting ex factory This service is to be ordered once per installable server storage subsystem in order to get the server storage subsystem mounted into the racks In case of not installed server and subsystems this service has to be ordered to get the mounting kits and the cables installed Primercy classic 19 rack is not supported Fujitsu Technology Solutions x86 PRIMERGY Serve Status 2014 09 30 Further information for rack mounting is available w
3. SAS 6Gb Connector mini SAS incl SAS cable incl cleaning cartridge without data cartridge 1 6 5 25 max 1x per system 26361 F3627 E1 Tape drive LTOSHH Ultrium SAS 1500GB 140MB s SAS 6Gb Connector mini SAS incl SAS cable incl cleaning cartridge without data cartridge 1 6 5 25 max 1x per system System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 For external SAS Backup drives an additional SAS controller has to be configured 526361 3787 1 Tape drive LTO6HH Ultrium SAS 2500GB 160MB s SAS 6Gb Connector mini SAS incl SAS cable incl cleaning cartridge without data cartridge 1 6 5 25 max 1x per system Fujitsu Technology Solutions x86 PRIMERGY Serve 17 of 30 4x 8x or 12x with SAS expander for basic unit V1xx System configurator and order information guide PRIMERGY RX2540 M1 Modular Raid controller is connected to internal HDDs For basic unit V112 up to 12 SAS 3 5 hard disks can be configured also in mixed configuration The option Tape drive is not possible for 3 5 Version V1xx SAS and SATA drives can be mixed but not used in one logical RAID volume SAS drives requires SAS Controller Support of SAS12G requires SAS12G Controller SAS12G drives are SAS6G compatible SSD Mainstream Endurance 10DWPD over 5y Status 2014 09 30 SSD Read Intesive Endurance 0 3DWPD over 5y SATA Disk Drive 3 5 H
4. SAS 12Gb sec 8 port external PCle 3 0 x8 MD2 form factor full height low profile bracket max 1x per system S26361 F5243 E200 TFM Module for FBU option flash and FBU control logic max 1x per Controller S26361 F5243 E125 Flash Backup Unit with 25cm cable set max 1x per Controller as soon as available S26361 Fxxx E661 RAID Advanced Software Options License Activation Key for CacheCade 2 0 and FastPath max 1x per Controller System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Lose delivery options FBU max 2x per system possible S26361 F5243 E200 TFM Module for FBU option flash and FBU control logic max 1x per Controller S26361 F5243 L110 Flash Backup Unit with 25 55 70 cable set max 1x per Controller 26361 Fxxx L661 RAID Advanced Software Options License Activation Key for CacheCade 2 0 and FastPath max 1x per Controller Fujitsu Technology Solutions x86 PRIMERGY Serve 23 of 30 8 System configurator and order information guide PRIMERGY RX300 S8 Status 2014 06 30 Available in February 2015 as soon as available 26361 F5267 E201 PPCI EP x16 Switch PCle x16 to 4x x4 switch PCle x16 Low profile MD2 form factor max 2x per system loose delivery S26361 F5267 L501 Low Profile PCle form factor with exchangeable Full Height FH or Low Profile LP bracket if so prefer to add such a description th
5. lose with the shipment For suitable peripherals for this product please refer to SystemArcitect as soon as available Cool safe ATD configuration restrictions for RX2540 M1 S26361 F3776 E101 o Restricts configuration to make no tape drives Tape drive LTO4 HH SAS IBM V2 26361 F3626 E2 Feature is enabled and fixed ex factory Tape drive LTOSHH Ultrium SAS 26361 F3627 E1 Tape drive LTO6HH Ultrium SAS 26361 F3787 E1 26361 F1452 E100 REGION KIT EMEA AP For Shipments to EMEA Asia and Pacific regions 1x per system Power cord has to be ordered separately Power cord options 1x per PSU T26139 Y1968 E100 Powercord for rack 4m grey IEC 320 C14 connector T26139 Y1742 E10 USA Canada 1 8m grey T26139 Y3850 E10 Option no powercord for Countries without specific cable orderable like e g China End PRIMERGY RX2540 M1 Fujitsu Technology Solutions x86 PRIMERGY Serve 29 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Change Report PAG Order number Changes 2014 09 29 2DPCRDIMM configuration 2 133MHz available in 11 2014 remark added 2014092 JORID Cards Mixed configurations of GRID KT amp K2 supported as wel SATADOM order number corrected from F5222 to F5522 2014 09 08 2014 09 08 2014 09 05 HDD SSD configurations without RAID controller are possible on special relea
6. order information guide PRIMERGY RX2540 M1 as soonjas available 26361 F5536 E202 E2 10GBit s LAN Eth Ctrl 2x10Gbit PCle x8 SFP Emulex OCe14102 N 2 channel 10GBit sec LAN ext 2x SFP cage PCle x8 170mm max 4 per system max 4 per system Status 2014 09 30 26361 F3629 E202 E2 D2755 Eth Ctrl 2x10Gbit PCle x8 D2755 SFP Intel Niantic based dual port 10Gb NIC 10 Gigabit Ethernet Contr dual port SFP PCle x8 Low Profile LP FH Bracket 26361 F3752 E202 E2 Intel X540 T2 Eth Ctrl 2x10GBase T Ip Intel Twinville based 2 port Server Ad PCle x4 Low Profile low profile LP or full height FH bracket ext 2x SFP cage max 3x per system ext for RJ45 plug Cat 6 max 3x per system 26361 F5250 E110 SFP Module MMF 10GbE LC SFP module for 10 Gbit Ethernet FO cabling ext LC connector 26361 F3986 E3 SFP Module MMF 10GbE LC SFP module for 10 Gbit Ethernet 50um FO cabling ext LC SR connector 26361 F3986 E4 SFP Module SMF 10GbE LC SFP module for 10 Gbit Ethernet 9m FO cabling ext LC LR connector max 2x per controller max 2x per controller max 2x per controller a ee ee ey JV TWX Connector PY for all Twinax FTS BR Cl I 2 per controller J o The SFP modules are also eo The SFP module is also available as loose delivery S26361 F5250 L110 Instead SFP modules SFP twinax cables from switc
7. supports max 8 HDDs on internal SAS ports Modular Raid 5 controller for SAS SATA FRAID levels 0 1 10 5 50 6 and 60 fare supported iThis RAID controller supports max 24 HDDs icombined with internal SAS expander as soon as available S26361 F5243 E1 PRAID EP400i Based on chip LSISAS3108 LSI MegaRAID 1GB Cache with ECC RAID 0 1 10 5 50 6 60 optional FBU Support for 3Gb s 6Gb s and 12Gb s SATA and SAS hard drives PCle 3 0 x8 Low profile ex factory max 2x per system S26361 F3842 E1 PRAID CP400i Based on chip LSISAS3008 LSI MegaRAID no Cache no BBU RAID 0 1 amp E RAIDS 50 tbd Support for 3Gb s 6Gb s and 12Gb s SATA and SAS hard drives PCle 3 0 x8 Low profile ex factory max 1x per system 526361 5243 2 PRAID EP420i Based on chip LSISAS3108 LSI MegaRAID 2GB Cache with ECC RAID 0 1 10 5 50 6 60 optional FBU SATA and SAS hard drives PCle 3 0 x8 Low profile ex factory max 2x per system S26361 F5243 E100 for EP400i TFM Module for FBU option flash and FBU control logic max 1x per Controller 26361 F5243 E200 for EP420i TFM Module for FBU option flash and FBU control logic max 1x per Controller 2x S26361 F5243 E125 Flash Backup Unit with 25cm cable set max 1x per Controller PRAID EP4x0i only The FBU is an option for the controller as soon as available S26361 F5243 E660 RAID Advanced Softwa
8. 03 L127 2 USB Memorybird MyUSBS A910 8GB MLC Flash 26391 F6048 L208 MyUSBS A910 16GB MLC Flash 26391 F6048 L216 Only for basic unit V401 with max 16 HDDs and V101 with max 8 HDD as soon as available 526361 3778 1 526361 3718 2 DVD RW supermulti ultraslim Blu ray Triple Writer ultraslim SATA DVD ROM ultraslim SATA SATA 16x DVD 48x CD 1x 8x DVD 24x CD BD DL and all CD DVD formats 9 5mm x 5 25 black bezel 9 5mm x 5 25 black bezel max 1x per system Only for basic un V401 as soon as available 26361 F3750 E5 RDX cartridges must be ordered separately RDX Drive USB3 0 3 5 internal RDX 320GB S26361 F3857 L320 100MB s USB 3 0 RDX 500GB S26361 F3857 L500 Connector USB 3 0 B RDX 1TB S26361 F3857 L600 with USB cable 10x RDX320 S26361 F3857 L329 without RDX cartridges The drive is also available as optional loose delivery 26361 F3750 L5 L7 with USB3 0 cable for adapter card The USB3 0 Adapter card or the USB2 0 cable set 26361 F3750 L20 must be ordered with the drive RDX Drive is connected to on board USB3 Fujitsu Technology Solutions x86 PRIMERGY Serve 16 of 30 1x SAS Controller for internal Backup Drives as soon as available 26361 F3842 E2 E202 PSAS CP400i Based on chip LSISAS3008 int 8 port PCle 3 0 x8 full height or low profile bracket max 1x per system 26361 F3626 E2 Tape drive LTO4 HH SAS IBM V2 800GB 120MB s
9. 3 MHz DDR4 Bus 8 0 amp 9 6 GT s Bus occupies socket for one CPU Xeon E5 2600v3 R High Core Count 1x 64 bit Intel Xeon 35 40MB Smart Cache Hyper Threading HT 2133 MHz DDR4 Bus 9 6 GT s QPI Bus occupies socket for one CPU Xeon E5 2683v3 14C 28T 2 00GHz 35MB 9 6GT s 2133MHz 120W S26361 F3849 E183 Xeon E5 2695v3 14C 28T 2 30GHz 35MB 9 6GT s 2133MHz 120W S26361 F3849 E195 Xeon E5 2697v3 14C 28T 2 60GHz 35MB 9 6GT s 2133MHz 145W S26361 F3849 E197 Xeon E5 2698v3 16C 32T 2 30GHz 40MB 9 6GT s 2133MHz 135W S26361 F3849 E198 Xeon E5 2699v3 18C 36T 2 30GHz 45MB 9 6GT s 2133MHz 145W S26361 F3849 E199 Xeon E5 2600v3 R Low Power 1x 64 bit Intel Xeon 20 30MB Smart Cache Hyper Threading HT 1866 2133 MHz DDR4 Bus 8 0 9 6 GT s QPI Bus occupies socket for one CPU Xeon E5 2630Lv3 8C 16T 1 80GHz 20MB 8 0GT s 1866MHz 55W 526361 3849 131 Xeon E5 2650Lv3 12C 24T 1 80GHz 30MB 9 6GT s 2133MHz 65W S26361 F3849 E151 Separate orderable CPU upgrade kits S26361 F3849 L403 Xeon E5 2603v3 6C 6T 1 60GHz 15MB 6 4GT s 1600MHz 85W S26361 F3849 L409 Xeon E5 2609v3 6C 6T 1 90GHz 15MB 6 4GT s 1600MHz 85W S26361 F3849 L420 Xeon E5 2620v3 6C 12T 2 40GHz 15MB 8 0GT s 1866MHz 85W S26361 F3849 L430 Xeon E5 2630v3 8C 16T 2 40GHz 20MB 8 0GT s 1866MHz 85W S26361 F3849 L440 Xeon E5 2640v3 8C 16T 2 60GHz 20MB 8 0GT s 1866MHz 90W S26361 F3849 L450 Xeon E5 2650v3 10C 20T 2 30GHz 25MB 9 6GT s 2133MHz 105W S26361 F3849 L423 Xeon E
10. 361 F3849 E190 Xeon E5 2600v3 R Frequency Optimized occupies socket for one CPU Xeon E5 2637v3 4C 8T 3 50GHz 15MB 9 6GT s 2133MHz 135W Xeon E5 2643v3 6C 12T 3 40GHz 20MB 9 6GT s 2133MHz 135W S26361 F3849 E143 1x 64 bit Intel Xeon 10 20MB Smart Cache Hyper Threading HT 1866 amp 2133 MHz DDR4 Bus 8 0 amp 9 6 GT s QPI Bus S26361 F3849 E137 Xeon E5 2667v3 8C 16T 3 20GHz 20MB 9 6GT s 2133MHz 135W S26361 F3849 E167 Xeon E5 2600v3 R High Core Count 2133 MHz DDR4 Bus 9 6 GT s QPI Bus occupies socket for one CPU 1x 64 bit Intel Xeon 35 40MB Smart Cache Hyper Threading HT Xeon E5 2683v3 14C 28T 2 00GHz 35MB 9 6GT s 2133MHz 120W S26361 F3849 E183 Xeon E5 2695v3 14C 28T 2 30GHz 35MB 9 6GT s 2133MHz 120W 526361 3849 195 Xeon E5 2698v3 16C 32T 2 30GHz 40MB 9 6GT s 2133MHz 135W S26361 F3849 E198 Xeon E5 2697v3 14C 28T 2 60GHz 35MB 9 6GT s 2133MHz 145W S26361 F3849 E197 Xeon E5 2699v3 18C 36T 2 30GHz 45MB 9 6GT s 2133MHz 145W 26361 F3849 E199 Xeon E5 2600v3 R Low Power occupies socket for one CPU 1x 64 bit Intel Xeon 20 30MB Smart Cache Hyper Threading HT 1866 2133 MHz DDR4 Bus 8 0 9 6 GT s QPI Bus Xeon E5 2630Lv3 8C 16T 1 80GHz 20MB 8 0GT s 1866MHz 55W S26361 F3849 E131 Xeon E5 2650Lv3 12C 24T 1 80GHz 30MB 9 6GT s 2133MHz 65W S26361 F3849 E151 526361 3849 100 Cooling Kit 2nd CPU Fujitsu Te
11. 5 2623v3 4C 8T 3 00GHz 10MB 8 0GT s 1866MHz 105W Fujitsu Technology Solutions x86 PRIMERGY Serve 8 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 There are 12 memory slots per CPU for max 768GB LRDIMM 12x 64GB 4R 384GB RDIMM 12x 32GB 2R gt max 1 536GB for two CPUs 768GB per CPU using LRDIMM The memory area is divided into 4 channels per CPU with 3 slots per channel Slot 1 of each channel belongs to memory bank 1 the slot 2 belongs to memory bank 2 slot 3 belongs to memory bank 3 Registered and Load Reduced DIMMs can be selected No mix of registered and load reduced modules is allowed Memory will be operated at 1 2V Depending on the CPU following memory speeds will be reached In a single DIMM per channel configuration 2133MHz will be supported This is also valid for a dual LRDIMM configurations 2166MHz In a dual RDIMM configuration 1866MHz will be supported All 3DPC configurations support 1600MHz SDDC Chipkill is supported for registered and load redueced x4 organized memory modules 1 In the Independent Channel Mode the following configuration is possible Channels can be populated in any order in Independent Channel Mode All four channels may be populated in any order and have no matching requirements All channels must run at the same interface frequency but individual channels may run at different DIMM timings RAS latency CAS latency and so forth No mix
12. 71 L103 26361 F4571 L105 26361 F4571 L107 26361 F4571 L110 SFP passive Twinax Cable Cisco 1m SFP passive Twinax Cable Cisco 3m SFP passive Twinax Cable Cisco 5m SFP active Twinax Cable Cisco 7m SFP active Twinax Cable Cisco 10m Fujitsu Technology Solutions x86 PRIMERGY Serve 25 of 30 1Gbit s Ethernet Adapter 526361 4610 202 2 1350 2 Gbit Ethernet Controller Dual 1000TX LP 26361 F4610 E204 E4 1350 74 Gbit Ethernet Controller Quad 1000TX LP System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Please note that this PCle cards have different order numbei Ex for full height slots or E20x for low profile slots Loose delivery with FH and LP bracket 1350 72 S26361 F4610 L502 Yy PLAN CP 2x1Gbit Cu Intel I350 T2 LP Intel Powerville based 2 port Server Ad PLAN CP 4x1Gbit Cu Intel 1350 T4 LP Intel Powerville based 4 port Server Ad 1350 T4 26361 F4610 L504 A PCle x4 Low Profile low profile LP or full height FH bracket ext for RJ45 plug Cat 5 max 4x per system PCle x4 Low Profile low profile LP or full height FH bracket ext for RJ45 plug Cat 5 max 4x per system Fujitsu Technology Solutions x86 PRIMERGY Serve 26 of 30 7 10Gbit s Ethernet Adapter 26361 F5250 E201 E1 Emulex OCe14102 U 2 channel 10GBit sec CNA PCle x8 170mm System configurator and
13. 9 E80 SSD SAS 12Gb s 2 5 SSD within 3 5 hot plug hot replace tray H P 200GB Enterprise EP Mainstream Endurance ME 26361 F5320 E200 400GB Enterprise EP Mainstream Endurance ME 26361 F5320 E200 800GB Enterprise EP Mainstream Endurance ME 26361 F5320 E80 1 6TB Enterprise EP Mainstream Endurance ME 26361 F5320 E16 max 4x 8x or 12x per System Please order additionally either or Config 1 Max 4x 3 5 HDD Config 2 Up to 8x 3 5 HDD Config 3 Up to 12x 3 5 HDD as soon as available as soon as available as soon as available as soon as available Fujitsu Technology Solutions x86 PRIMERGY Serve 18 of 30 8 16 24 for V4xx System configurator and order information guide PRIMERGY RX2540 M1 Solid State Disk SATA DOM SSD SATA 6Gb s DOM non hot plug hot replace 32GB SATA DOM 26361 F5522 E32 64GB SATA DOM 26361 F5522 E64 128GB SATA DOM 26361 F5522 E128 Solid State Disk 2 5 SATA 6G Read Intensive SSD SATA 6Gb s 2 5 with hot plug hot replace tray H P 120GB Enterprise EP Read Intensive 26361 F5525 E120 max 8 16 24x per system Solid State Disk 2 5 SATA 6G Mainstream 100GB Enterprise EP Mainstream Endurance ME 26361 F3821 E100 200GB Enterprise EP Mainstream Endurance ME 26361 F3821 E200 400GB Enterprise EP Mainstream Endurance ME 26361 F3821 E400 a a l Solid State Disk 2 5 SAS 12G Mainstrea
14. DD SATA 6Gb s 3 5 with hot plug hot replace tra 500GB 7200rpm 9 0ms 64MB Cache TB 7200rpm 9 0ms 64MB Cache TB 7200rpm 9 0ms 64MB Cache TB 7200rpm 9 0ms 64MB Cache 526361 3815 50 526361 3815 10 526361 3815 20 26361 F3815 E30 526361 3815 40 TB 7200rpm 9 0ms 64MB Cache gt e oj oj ojo max 4x 8x or 12x per System SAS Disk Drive 3 5 HDD SAS 12Gb s 2 5 HDD within 3 5 hot plug hot replace tra 300GB 15000rpm 1ms 128MB Cache 26361 F5532 E530 450GB 15000rpm 1ms 128MB Cache 26361 F5532 E545 600GB 15000rpm 1ms 128MB Cache 26361 F5532 E560 HDD SAS 6Gb s 3 5 with hot plug hot replace tra TB 7200rpm lt 9 0ms 32MB Cache 2TB 7200rpm lt 9 0ms 32MB Cache 7200rpm 9 0ms 32MB Cache 4TB 7200rpm lt 9 0ms 32MB Cache 26361 F3820 E10 26361 F3820 E200 26361 F3820 E30 26361 F3820 E400 Solide State Disk 3 5 SSD SATA 6Gb s 2 5 SSD within 3 5 hot 120GB Enterprise EP Read Intensive 240GB Enterprise EP Read Intensive 480GB Enterprise EP Read Intensive 800GB Enterprise EP Read Intensive 26361 F5530 E120 26361 F5530 E240 26361 F5530 E480 26361 F5530 E80 100GB Enterprise EP Mainstream Endurance ME 26361 F5289 E10 200GB Enterprise EP Mainstream Endurance ME 26361 F5289 E20 400GB Enterprise EP Mainstream Endurance ME 26361 F5289 E400 800GB Enterprise EP Mainstream Endurance ME 26361 F528
15. Effective Memory capacity with active Rank Sparing Mode Population rule for Rank sparing mode is to achieve max available memory e g 6 DIMMs will be spread across two channels each with 3DPC Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 30 PRIMERGY TX300 S8 RX350 S8 Status 2014 01 30 order information guide Graphics Controller integrated in iRMC S4 integrated Remote Management Controller with following resolutions 1920x1200x16bpp 1920x1080x16bpp 1600x1200x16bpp 1680x1050x16bpp 1440x900x16bpp 1152x864x16bpp 1280x1024x32bpp 1024x768x32bpp 800x600x32bpp 640x480x32bpp Opt Front VGA Please refer to Sys Manag XII as soon as available 26361 F2748 E637 cable kit for 2x DVI or 2x VGA supports dual head operation 2D amp Optional Front VGA 3D For Windows OS amp native driver support for Linux Low profile bracket The optional NVIDIA NVS300 graphic card offers dual head operation and 3D video support The cables for either two times DVI I or VGA cable kit connections are part of the delivery Remote Video redirection via iRMC must be disabled This PCle x1 card can also be installed in any PCle x4 x8 or x16 slot only possible for onboard graphics max 1x per system 26361 F2748 L637 PY VGA card 512MB PCl e x1 for later upgrade Mounting Kit consumes PCle x16 low profile slot as soon as available PY GRID K1 K2 M
16. FH and LP bracket included only within a rack configuration rior rr mani 526361 3996 556 InfiniBand Cu Cable 56Gb customized I QSFP 1m and 3m pmax 2x per adapter J If additional length of copper cable or optical cable are needed then they must be ordered from the cable vendor directly Copper cable are also available for loose delivery as S26361 F3996 L561 QSFP 56Gb 1m S26361 F3996 L563 QSFP 56Gb 3m Fujitsu Technology Solutions x86 PRIMERGY Serve 28 of 30 System configurator and order information guide C 5s PRIMERGY RX2540 M1 Status 2014 09 30 max iRMC S4 integrated Remote Management Controller onboard server management Controller with dedicated 10 100 1000 Service LAN port and integrated graphics 26361 F1790 E243 iRMC S4 advanced pack integrated remote management controller activation key for graphical console redirection and remote media redirection max 1x per system 26361 F1420 E130 Font VGA for IRMC Graphic only Loose delivery Opt Front VGA not for discrete Graphic Opt front VGA 26361 F1420 L130 max 1x per system not for 12x 3 5 and 24x 2 5 HDD 26361 F3120 E40 Serial Port Option RS 232 C Cable with 9 pin plug for a RS 232 C Serial Port Interface does NOT occupy PCI slot Options and other peripherals For other options refer to SystemArchitect and Pricelist These options are supplied
17. FUJITSU PRIMERGY RX2540 M1 System configurator and order information guide October 2014 Available in November 2014 Instructions Configuration diagram Configurator 0 System software Basic unit l Processor Il Memory IV Graphics amp GPGPU amp Co Processors V Accessible drives VI Hard disk drives VII PCI Controller VIII PCle SSD SFF 2 5 Controller and Devices IX Communication Network X System Management Products RemoteView Miscellaneous XII Country specific power cord Change report PRIMERGY Server System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC System Architect Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system You can configure your individual PRIMERGY server in order to adjust your specific requirements The System configurator is divided into several chapters that are identical to the current price list and PC SystemArchitect Please follow the lines If there is a junction you can choose which way or component you would like to take Go through the configurator by following the lines from the top to the bottom There are X memory slots which can be equipped with XXX MB It is permissible to make up to X passes through the memory
18. Upgrade kits for this configuration option Upgrade kit to 12x 3 5 HDD 26361 F2495 L123 Available in November 2014 12x HDDs for V112 no ODD Available Upgrade kits for this configuration option Available in February 2015 Available Upgrade kits for this configuration option Available Upgrade kits for this configuration option Available Upgrade kits for this configuration option Available Upgrade kits for this configuration option None Includes all necessary bezels cages backplanes and cables Available in February 2015 Provides 4 rear hot plug bays for SAS SATA HDD SSD or PCle SSD SFF devices max 1x per system Includes all necessary bezels cages backplanes and cables Available Upgrade kits for this configuration option Fujitsu Technology Solutions x86 PRIMERGY Serve 15 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Setup RX2540 1 by ServerStart is supported with following configurations no DVD no CD remote installation only PXE service amp DHCP server required built in CD DVD or USB CD DVD disk drive UNC Network share reachable or USB Floppy connected USB Floppy no CD DVD USB CD DVD connected If installation is done locally make sure you have external FDD available for driver installation Following USB Components are available 1 USB DVD SM Blu Ray External SuperMulti Drive 26341 F103 L126 External Blu Ray Drive 26341 F1
19. ails see price liste loose delivery Single channel S26361 F3631 L201 L1 Dual Channel 26361 F3631 L202 L2 with mounted LP bracket FH bracket is not included as soon as available as soon as available 26361 F5313 E201 E1 26361 F5313 E202 E2 16GBit s FC Controller 16GBit s FC Controller QLE2670 low profile bracket QLE2672 low profile bracket LC Interface for 50m Fiber LC Interface for 50m Fiber loose delivery Single channel S26361 F5313 L501 Dual Channel S26361 F5313 L502 contains LP and FH brackets S26361 F3961 E202 E2 8GBit s FC Controller Emulex LPe12002 low profile bracket 8GBit s FC Controller LPe1250 low profile bracket v loose delivery 6x 1 channel 8GBit sec FC Contr 2 channel 8GBit sec FC Contr Single channel S26361 F3961 L201 L1 A LC Interface for 501m Fiber LC Interface for 50m Fiber Dual Channel S26361 F3961 L202 L2 PCle2 x8 170mm max 6x per system PCle2 x8 170mm max 6x per system with mounted LP bracket FH bracket is not included available later loose delivery Single channel S26361 F4994 L501 Dual Channel S26361 F4994 L502 contains LP and FH brackets Fujitsu Technology Solutions x86 PRIMERGY Serve 22 of 30 SAS RAID controller for JBOD subsystems as soon as available 26361 F3847 E202 LP LSI MegaRAID SAS 9385 8e 2GB Cache with ECC RAID 0 1 5 6 10 50 amp 60 without FBU
20. annel Configuration hints The memory sockets on the systemboard offer a color coding Bank I black sockets Bank II blue sockets Bank 1 green sockets A so called Bank consits of 1 memory module on every Channel available on one CPU examples see below Bank I on CPU 1 2 up to 4 memory modules connected to Channel A H on the 1st 2nd CPU Bank Il on CPU 1 2 up to 4 memory modules connected to Channel A H on the 1st 2nd CPU Bank Ill on CPU 1 2 up to 4 memory modules connected to Channel A H on the 1st 2nd CPU See below and next page for a detailed descriptions of the memory configuration supported Fujitsu Technology Solutions x86 PRIMERGY Server 11 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 1 Independent Channel Mode a o a ul u T 5 5 5 5 5 3 required c c c c X x lt o o o o Bank black sockets Bank blue sockets Bank 1 green sockets optional same type in Bank per CPU C LI required if 2nd CPU is configured 1 C optional any type not used 1st XEON CPU 4 14 Core Independent Channel Mode allows all channels to be populated in any order Can run with differently rated DIMMs and use the settings of the slowest DIMM installed in the system 2 Mirrored Channel Mode required nnel A annel B nnel C nnel D nnel E
21. can decide between 4 basic modes of operation see explanation below There are 2 different kinds of DDR4 Memory Modules available RDIMM and LRDIMM Mix of RDIMM and LRDIMM is not allowed Application RDIMM ese x8 o SDDC support any no Independant Channel Mode 1 2 or 3 Modules per Bank yes identical Modules Bank no yes Rank Sparing Mode min 2 Ranks Channel no yes balances security and capaciy For the delivery ex works the system will be prepared with dedicated BIOS setting Capacity Configuration pomm LRDIMM TNoies Min Memory per CPU 1 Module CPU 1x8GB 1x32GB with one CPU e e Max Memory per CPU 12 Modules CPU 12x32GB 12x64GB with one CPU Max Memory per System 24 Modules System 768GB 1536GB if second CPU is configured Memory Speed Max DDR4 memory speed depends on the memory configuration on one memory channel and the speed of the CPU The memory channel with the lowest speed defines the speed of all CPU channels in the system Mem Speed provided by CPU Real maximum memory bus speed depending on CPU type memory configuration DPC and voltage setting LRDIMM 2133MHz Voltage setting BIOS 1 2 3 1 2 3 DPC DPC DPC DPC DPC 0 1 Single Rank 4R Quad Rank 2R Dual Rank 8R Eight Rank 1DPC 1 DIMM per Channel 2DPC 2 DIMM per Channel 3 DIMM per Ch
22. chnology Solutions x86 PRIMERGY Serve 7 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 One of following CPU s has to be selected as second CPU Optional second CPU has to be the same type like the first CPU Xeon E5 2600v3 R Basic 1x 64 bit Intel Xeon 15MB Smart Cache 1600 MHz DDR4 Bus 6 4 GT s QPI Bus occupies socket for one CPU Xeon E5 2603v3 6C 6T 1 60GHz 15MB 6 4GT s 1600MHz 85W S26361 F3849 E103 Xeon E5 2609v3 6C 6T 1 90GHz 15MB 6 4GT s 1600MHz 85W 26361 F3849 E109 Xeon E5 2600v3 R Standard 1x 64 bit Intel Xeon 15 20MB Smart Cache Hyper Threading HT 1866 MHz DDR4 Bus 8 0 GT s QPI Bus occupies socket for one CPU Xeon E5 2620v3 6C 12T 2 40GHz 15MB 8 0GT s 1866MHz 85W 26361 F3849 E120 Xeon E5 2630v3 8C 16T 2 40GHz 20MB 8 0GT s 1866MHz 85W 26361 F3849 E 130 Xeon E5 2600v3 R Advanced 1x 64 bit Intel Xeon 25 30MB Smart Cache Hyper Threading HT 2133 MHz DDR4 Bus 9 6 GT s Bus occupies socket for one CPU Xeon E5 2650v3 10C 20T 2 30GHz 25MB 9 6GT s 2133MHz 105W 26361 F3849 E 150 Xeon E5 2660v3 10C 20T 2 60GHz 25MB 9 6GT s 2133MHz 105W 26361 F3849 E 160 Xeon E5 2680v3 12C 24T 2 50GHz 30MB 9 6GT s 2133MHz 120W 26361 F3849 E 180 Xeon E5 2690v3 12C 24T 2 60GHz 30MB 9 6GT s 2133MHz 135W S26361 F3849 E190 Xeon E5 2600v3 R Frequency Optimized 1x 64 bit Intel Xeon 10 20MB Smart Cache Hyper Threading HT 1866 amp 213
23. cond CPU if configured For real memory speed depending on memory type population please check the spreadsheet Memory speed below o Note 2 Mix of memory modules is only possible within the same group Registered Memory RDIMM with SDDC chipkill support one DDR4 registered ECC memory Module 1 2V Choose up to 12 order codes per CPU 8GB 1x8GB 1Rx4 DDR4 2133 R ECC 526361 3843 514 16GB 1x16GB 2Rx4 DDR4 2133 ECC 526361 3843 516 32GB 1x32GB 2Rx4 DDR4 2133 R ECC 526361 3843 517 CPU max Registered Memory RDIMM no SDDC chipkill support 3 modules one registered ECC memory Module 1 2V per channel Choose up to 12 order codes per CPU 8GB 1x8GB 2Rx8 DDR4 2133 R ECC 526361 3843 515 Load Reduced Memory LRDIMM with SDDC chipkill support one DDR4 load reduced ECC memory Module 1 2V Choose up to 12 order codes per CPU 32GB 1x32GB 4Rx4 DDR4 2133 LR ECC 64GB 1x64GB 4Rx4 DDR4 2133 LR ECC 12x per as soon as available S26361 F3844 E517 S26361 F3844 E518 as soon as available Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Memory Configuration PRIMERGY RX2540 M1 Each CPU offers 12 Slots for DDR4 Memory Modules organised in 3 Banks and 4 Channels If you need more than 12 Slots you have to configure the 2nd CPU Depending on the amount of memory configured you
24. h vendors may be used available as loose delivery 26361 F3986 L3 26361 F3986 L4 Instead SFP modules SFP twinax cables from switch vendors may be used max 4x S26361 F3989 E600 1 S2636i F3873 E500 1 526361 F4571 E500 active twinax cable 1 active twinax cable 1 SFP passive twinax cable o customized twinax cable for customized twinax cable for customized twinax cable for I 1 full rack setup ex factory rack setup factory rack setup ex factory in SA only cable length is selected by I yore length is selected by I jeable length is selected by I shown in requirement in the factory reguirement in the factory prequirement in the factory cabling view Fujitsu branded cable Brocade branded cable 2x per controller o The controller D2755 is delivered without SFP modules for optical cables these must be ordered separately Loose delivery options FH and LP bracked included Cisco branded cable ae 2x per controler rsi eee o iH separate orderable 10Gb Ethernet cables S26361 F3989 L102 SFP active Twinax Cable Fujitsu 2m S26361 F3989 L105 SFP active Twinax Cable Fujitsu 5m S26361 F3989 L110 SFP active Twinax Cable Fujitsu 10m 26361 F3873 L501 SFP active Twinax Cable Brocade 1m 0Ce14102 U S26361 F5250 L501 26361 F3873 L503 SFP active Twinax Cable Brocade 3m OCe14102 N S26361 F5536 L502 26361 F3873 L505 SFP active Tw
25. ic unit with 3 5 HDD bays expandable 26361 K1495 V101 12x 3 5 HDD bays 526361 K1495 V112 Available in November 2014 Basic unit with 2 5 HDD bays expandable 526361 1495 401 Available in February 2015 24x 2 5 HDD bays S26361 K1495 V424 Available in February 2015 as soon as available as soon as available 526113 575 13 526113 574 13 526113 616 10 526113 615 10 450W PSU module platinum 800W PSU module platinum 1200W PSU module platinum 800W PSU module titanium 1st or 2nd PSU for redundancy 1st or 2nd PSU for redundancy 1st or 2nd PSU for redundancy 1st or 2nd PSU for redundancy 94 efficiency platinum 94 efficiency platinum 96 efficiency titanium fos ses 110V range 1000W 110V range not supported uses hot plug PSU slot uses hot plug PSU slot uses hot plug PSU slot min 1 max 2x per system min 1 max 2x per system min 1 max 2x per system 94 efficiency platinum uses hot plug PSU slot min 1 max 2x per system For later redundancy upgrade the following kit is available One 450W power supply module hot plug 26113 F575 L13 no power cable included One 800W power supply module hot plug 26113 F574 L13 no power cable included One 1200W power supply module hot plug 26113 F616 L10 no power cable included One 800W power supply module titanium 26113 F615 L10 no power cable included Please order appropriate power cord additionally Powe
26. inax Cable Brocade 5m D2755 S26361 F3629 L502 26361 F4571 L101 SFP passive Twinax Cable Cisco 1m X540 T2 26361 F3752 L502 26361 F4571 L103 SFP passive Twinax Cable Cisco 3m 26361 F4571 L105 26361 F4571 L107 26361 F4571 L110 SFP passive Twinax Cable Cisco 5m SFP active Twinax Cable Cisco 7m SFP active Twinax Cable Cisco 10m Fujitsu Technology Solutions x86 PRIMERGY Serve 27 of 30 H InfiniBand HCA s 26361 F4475 E122 E222 26361 F4475 E103 E203 System configurator and order information guide PRIMERGY RX2540 M1 26361 F4533 E102 E202 Status 2014 09 30 PIB EP QLE7340e 42e Intel IB HCA 1x 2x 40Gb IB HCA 40Gb 1 and 2 port QDR enhanced IB HCA 1x 2x 56Gb PCle 2 0 5 0GT s PCle x8 low profile HCA 1x 2x 40Gb PCle 3 0 8 0GT s PCle 3 0 8 0GT s PCle x8 low profile ext 1x 2x QSFP connector max 2x per system PCle x8 low profile ext 1x 2x QSFP connector max 2x per system IB HCA 56Gb 1 and 2 port FDR ext 1x 2x QSFP connector gt Y lt 1S26361 F3996 E203 326361 F3996 E210 max 2x per system 1 lasep 3m jte IB Cu Cable 40Gb Intel IB FO Cable 40Gb pmex xpersdepler L j gmaxZrperadapler loose delivery S26361 F4475 L122 L222 loose delivery S26361 F4475 L103 L203 loose delivery S26361 F4533 L102 L202 Loose delivery with
27. ires min 1 memory Module per CPU S26361 F3694 E1 Rank Sparing Mode Installation BIOS Setup factory preinstalled to this mode One Rank is spare of other ranks on the same channel Spare Rank is not shown in System Memory For effective capacity within a channel please have a look below 1x per CPU Requires min 2x 1R 2R or 1x 4R modules per CPU 526361 3694 2 Performance Mode Installation BIOS Setup factory preinstalled for maximum Performance Four identical memory modules will be equipped in one memory bank to achieve highest memory performance All four modules are active and full capacity can be used Multiple of 4 identical modules to be configured per CPU S26361 F3694 E3 Mirrored Channel Mode Installation BIOS Setup factory preinstalled to this mode Four identical memory modules are always equipped in one memory bank to use the Mirrored channel Mode Only two modules contain active data the remain two modules contain mirrored data Multiple of 4 identical modules to be configured per CPU RDMM 9LRDMM _ 8GB 1R 16GB 2R 32GB 2R 32GB 4R 64GB 4R jIDPC 24GB 48GB 2DPC 24GB 3DPC 40GB e 20 Minimum one memory module or order code CPU st memory Note 1 Max DDR4 memory speed depends on the memory configuration No of mem modules per channel as well as on the CPU type The memory channel with the lowest speed defines the speed of all CPU channels in the system also for the channels of the se
28. is card is necessary in configurator as soon as available 26361 F5534 E161 26361 F5534 E201 2 5 PCle SSD 800GB MLC 2 5 PCle SSD 1 6TB MLC 2 5 PCle SSD 2TB MLC Solid State Disk Solid State Disk Solid State Disk PCle2 0 x4 PCle2 0 x4 PCle2 0 x4 hot plug hot replace tray max 4 8x per system hot plug hot replace tray hot plug hot replace tray max 4 8x per system max 4 8x per system Fujitsu PRIMERGY Server 24 of 30 DynamicLoM System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 26361 F5302 E401 26361 F5302 E211 max 1x A 4x1000Base T interface card 2x10Gb SFP interface card DynamicLoM interface module interface to Emulex LoM chip DynamicLoM interface module interface to Emulex LoM chip special DynamicLoM forn factor ext 4 x RJ45 plug Cat 5 Special DynamicLoM forn factor ext 2 x SFP for SR or LR max 1x per system max 1x per system as soon as available 2x1000Base T interface card DynamicLoM interface module special DynamicLoM forn factor 2x10GBase T interface card DynamicLoM interface module special DynamicLoM forn factor max 1x per system max 1x per system Loose delivery SFP options 26361 F3986 L3 26361 F3986 L4 max 2x 26361 F3986 E3 SFP Module MMF 10GbE LC SFP module for 10 Gbit Ethe
29. ithin the Corporate Partner Portal All L no s for loose delivery S26361 F2735 L10 asymmetrical PC racks with CMA adapter S26361 F2735 L175 best choice for 3rd party racks with CMA adapter RMK F1 DI QRL LV w o CMA adapter S26361 F2735 L7 Lateral cable management optionally can only be mounted in asymmetrical PRIMECENTER S2 or new 1 racks in 1U above RMK S26361 F2735 L82 Rack Cable Management Arm CMA 2U for 2U Server in racks 26361 F2201 L20 Cable arm 2U PCR M1 S and 3rd p racks for L176 has to be mounted above RMK 6 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 There are 2 processor sockets available The first socket must always be equipped with the first CPU which can be selected via configurator Two processors with different clock frequencies are not possible Max two CPU s can be selected per basic unit One of following CPU s can be selected once only as first CPU for an orderable basic unit Xeon E5 2600v3 R Basic 1x 64 bit Intel Xeon 15MB Smart Cache 1600 MHz DDR4 Bus 6 4 GT s QPI Bus occupies socket for one CPU Xeon E5 2600v3 R Standard 1x 64 bit Intel Xeon 15 20MB Smart Cache Hyper Threading HT 1866 MHz DDR4 Bus 8 0 GT s QPI Bus occupies socket for one CPU Xeon E5 2640v3 8C 16T 2 60GHz 20MB 8 0GT s 1866MHz 90W 526361 3849 140 Xeon E5 2600v3 Advanced 1x 64 bit Intel Xeon 25 30MB Smar
30. llsburg 6 PCI slots low profile 3x PCle 3 x16 2 slots are connected to CPU 2 and are useable with configured 2nd CPU only 2x PCle 3 x8 notched to install x16 cards 1 slot is connected to CPU 2 1x PCle 3 x8 may be used for modular RAID controller 8 PCI slots are possible with PCle riser card options 4x full height please see Section VII Nov 2014 24 memory slots each CPU 12 slots DDR4 are available Memory is divided into 12 DIMMs per CPU 4 channels with 3 slots per channel First Memory one module has to be selected for an orderable basic unit per CPU Dynamic LOM Quad Port 1Gb 10Gb Emulex Controller XE104 Skyhawk on motherboard up to Quad Port 1Gb or Dual Port 10Gb NIC plus full CNA functionality with iSCSI FCoE RDMA and UMC support connectors external interfaces are added by different variants of DynamicLoM interface modules The Service LAN port can be switched alternatively to a standard LAN port 1 iRMC S4 integrated Remote Management Controller on board server management controller with dedicated 10 100 1000 Service LAN port and integrated graphics controller Graphics Controller integrated in iRMC S4 integrated Remote Management Controller 1600x1200x16bpp 60Hz 1280x1024x16bpp 60Hz 1024x768x32bpp 75Hz 800x600x32bpp 85Hz 640x480x32bpp 85Hz 1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off Interfaces at the rear 1x RS 232 C serial 9 pins
31. luded in basic unit 2 Option One CPU one memory per CPU and one PSU has to be selected for an orderable basic unit Fujitsu Technology Solutions x86 PRIMERGY Serve 3 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 System unit consisting of 2U Housing without power supply modules Basic units with 2 Hot Plug Power Supply Bays 5 Fans full redundancy 12 memory DIMMs per CPU max 768GB gt Total 24 DIMMs max 1536GB for two CPU s as soon as available max 3072GB per system with two CPU s SAS Backplanes for 4x 8x or 12x 3 5 HD LFF or for 8 16 or 24x 2 5 HD SFF or PCle SFF backplanes Feb 2015 with cable connection to on board modular RAID Controller or PCle Switch Drives Bays 4 8 or 12 bays 1 for hot plug 3 5 HD 1 high or 8 16 or 24 bays for hot plug 2 5 HD Feb 2015 1 bay SATA DVD RW 0 4 height option not for basic unit with 12x 3 5 HD and with 24 x 2 5 HD 1 bay for 5 25 and 1 6 high Backup device not possible for basic units with 3 5 HD and for basic unit with 24 x 2 5 HD Integrated ServerView Diagnostics Technology Diagnosis LED s for indication of internal failed components Systemboard D3269 with Up to two Xeon DP CPU s Socket R3 with 2 serial QPI links Quick Path Interconnect and four memory channels per CPU First CPU has to be selected for an orderable basic unit Chipset Intel amp C610 Series codenamed We
32. m SSD SAS 12Gb s 2 5 with hot plug hot replace tray H P 200GB Enterprise EP Mainstream Endurance ME 26361 F5298 E200 400GB Enterprise EP Mainstream Endurance ME 26361 F5298 E400 800GB Enterprise EP Mainstream Endurance ME 26361 F5298 E800 1 6TB Enterprise EP Mainstream Endurance ME 26361 F5298 E160 max 8 16 24x per system SAS Disk Drive 2 5 HDD SAS 6Gb s 2 5 with hot plug hot replace tra 500GB 7 200rpm lt 9 5ms 64MB Cache 26361 F3817 E500 1TB 7 200rpm 9 5ms 64MB Cache 26361 F3817 E100 max 8 16 24x per system HDD SAS 12Gb s 2 5 with hot plug hot replace tra 450GB 10krpm 26361 Fxxxx E145 ee e o SATA Disk Drive 2 5 HDD SATA 6Gb s 2 5 with hot plug hot replace tra as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available as soon as available Fujitsu Technology Solutions x86 PRIMERGY Serve Status 2014 09 30 19 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 For every configuration with hard disks or SSDs one of the following modular RAID controllers is required Modular Raid 0 1 controller with IME support for SAS SATA This RAID controller
33. m slots are availble Please note that some PCle cards have different order numbers depending on full height slots or low profile slots And left or right side PCle riser card option is different as soon as available 26361 F3846 E22 PCle riser 2x x8 left PCle 3 0 x8 provides two full height slots max 1x per system as soon as available 26361 F3845 E201 E1 PSAS CP400e Ip fh ext 8 port PCle 3 0 x8 full height or low profile bracket max 2x per system as soon as available S26361 F3842 E2 E202 PSAS CP400i int 8 port PCle 3 0 x8 full height or low profile bracket max 1x per system Fujitsu Technology Solutions x86 PRIMERGY Serve 21 of 30 Please note that this PCle cards have different order numbers Ex for full height slots or E20x for low profile slots A combination of Emulex and Qlogic All controllers for the connection of external o storage system are delivered without cables For the configuration of external cabling see the configurator for external storage system Fibre Channel Controller for external storage systems 8GBit s FC Controller 8GBit s FC Controller QLE2560 low profile bracket QLE2562 low profile bracket LC Interface for 50um Fiber LC Interface for 50um Fiber PCle2 x8 170mm PCle2 x8 170mm max 6x per system max 6x per system For Fibre Channel SAN also other componets like switches SFPs and optical wires are orderable for det
34. n guide PRIMERGY RX2540 M1 Status 2014 09 30 4 Rank Sparing Mode 1 Rank Memory modules RDIMM m a u 3 5 5 3 required c c c c c E 5 required if 2nd CPU is configured o o o o o o o Bank optional same type in Channel per CPL BUB optional any type green sockets 1st XEON CPU 2nd XEON CPU 4 14 Core 4 14 Core 2 Rank Memory modules RDIMM a o a ul D c c c c c c c c c c c c G c E E E lt lt o o o o o o o o Bank required black required if 2nd CPU is configured Bank blue L optional same type in Channel per CPL Bank 111 LI optional any type green 1st XEON CPU 2nd XEON CPU 4 14 Core 4 14 Core 4 Rank Memory modules LRDIMM a o a o E c c c c c c c G G G lt lt o Bank Ly black LI required if 2nd CPU is configured optional same type in Channel per CPL Bank blue LJ optional any type Bank 111 green 1st XEON CPU 2nd XEON CPU 4 14 Core 4 14 Core Rank Sparing Mode requires identical modules same capacity and technology within the same channel The available memory for applications will vary depending on configuration Please refer to the spreadsheet above
35. of registered and load reduced modules is allowed 2 Rank Sparing Mode configuration Within a memory channel one rank is a spare of the other ranks The Spare Rank is held in reserve and is not available as system memory For the effective memory capacity please refer to the spreadsheet below The BIOS is set to the rank sparing setting Minimum configuration is 2x 1R 2x 2R or 1x4R DDR4 module per channel 3 Performance Mode configuration In this configuration the memory module population ex factory is spread across all channels The BIOS is set to the maximum performance for memory Minimum configuration is four identical modules per CPU 4 Mirrored Channel Mode configuration Each memory bank can optionally be equipped with four registered or load reduced DDR4 modules In each memory bank channel A and B C and D of CPU 1 or channel E and F G and H of CPU 2 have to be equipped with identical modules for mirrored channel mode In channel B D is always the mirrored memory of channel A B of CPU 1 In channel F H is always the mirrored memory of channel E G of CPU 2 Minimum configuration is four identical modules per CPU Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 S26361 F3694 E10 Independent Mode Independent Channel Mode allows all channels to be populated in any order No specific Memory RAS features are defined Requ
36. ounting Kit right left For later upgrade a service technician needed 1x v A 26361 F2222 E914 26361 F2222 E924 18GB DDR3 RAM PCle Gen3 8GB 5 RAM PCle separately 800W PSU is recommended separately 800W PSU is recommended PCle 16 Gen2 double width occupies space for PCle 16 Gen2 double width occupies space for two PCle slots Full height bracket two PCle slots Full height bracket v Supported for GPU pass through and vGPU shared GPU under Citrix XenServer 6 2 and XenDesktop only Workload depends on application Ideal for virtualized or shared GPU workload like Power Users Knowlegde Workers including Designer as full power graphic USER All Citrix XenServer guests are supported NOT certified for CAD CAM CAX type of applications using dedicated GPU Support of other virtualized operating systems refer releases VMware vSGA amp vDGA and Microsoft RemoteFX will be released as well cnfgRX2540M1 xlsx GFX amp GPUs 14 of 30 System configurator and order information guide G PRIMERGY RX2540 M1 Status 2014 09 30 Config 1 2 or 3 Up to 4x 8x or 12x 3 5 HDD LFF 4 HDDs in Config 1 with ultraslim ODD Basic unit S26361 K1495 V101 expandable Config 1 Max 4x 3 5 HDD included Available Upgrade kits for this configuration option Upgrade kit to 8x 3 5 HDD 26361 F2495 L112 8 HDDs in Config 2 with ultraslim ODD Config 2 Max 8x 3 5 HDD 26361 F2495 E12 Available
37. rcord for rack 4m grey IEC320 C13 gt C14 connector T26139 Y1968 L10 Power Cord USA Canada 1 8m grey T26139 Y1742 L10 S26113 F574 E99 Power Supply Dummy must be ordered if 1x PSU only hot plug power supply max 1x per system For order completeness only Not shown in system architect Version V9 2 26361 F3552 E6 TPM Module Trusted Platform Module on Motherboard Use according to import restrictions max 1x per system S26361 F3552 L6 TPM Module add on kit for later integration loose delivery Trusted Platform Module on Motherboard Use according to import restrictions max 1x per system Be aware of import restrictions Loose delivery for later integration possible for customer Fujitsu Technology Solutions x86 PRIMERGY Serve 5 of 30 PRIMECENTER Rack 26361 F2735 E145 RMK F1 DI CMA QRL best choice for PrimeCenter racks consisting of consisting of vario carrier 714 785mm telescopic drop in rails 781mm with quick release lever support with full extraction with CMA adapter 1x per system 26361 F4530 E11 Bracket 1U in asymmetrical racks 26361 F2735 E175 Rack Mount Kit F1 C S7 LV best choice for 3rd party racks vario carrier 559 914mm with quick release lever support with full extraction with CMA adapter 1x per system 26361 F4530 E10 Mounting of RMK in symmetrical racks System configurator and order information guide
38. re Options License Activation Key for CacheCade 2 0 and FastPath for 1 Controller which can be used once per controller If the FBU option has been choosen the TFM Module is needed once per FBU always use E100 for E1 E200 for E2 Fujitsu Technology Solutions x86 PRIMERGY Serve Support for 3Gb s 6Gb s and 12Gb s as soon as available The FBU is an option for the controller which can be used once per controller If the FBU option has been choosen the TFM Module is needed once per FBU as soon as available Lose delivery FBU optior S26361 F5243 L100 L200 TFM Module for FBU option flash and FBU control logic max 1x per Controller S26361 F5243 L110 Flash Backup Unit with 25cm 55cm 70cm cable set max 1x per Controller Advanced Software Optic S26361 F5243 L660 RAID Advanced Software Option License Activation Key for CacheCade 2 0 and FastPath for 1 Controller 20 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 PCle riser card options Every PCle riser card option consumes white PCle x16 low profile slot each as soon as available provides two PCle x8 full height slots instead Slot no 4 and 5 or no 10 and 11 So max four PCle x8 full height slots plus one PCle x16 and three PCle x8 low profile 26361 F3846 E21 PCle riser 2x x8 right PCle 3 0 x8 provides two full height slots max 1x per syste
39. rnet 50um FO cabling ext LC SR connector 26361 F3986 E4 SFP Module SMF 10GbE LC SFP module for 10 Gbit Ethernet 9um FO cabling ext LC LR connector max 2x per controller 526361 F3989 Ec00 S2e361 F3873 E500 S26361 F4571 E500 max 2x per controller NV Twx Connector PY I for all Twinax FTS BR Cl 1 pmax 2x per controller ISFP active twinax cable customized twinax cable for full rack setup ex factory lable length is selected by requirement in the factory fujitsu branded cable 1 active twinax cable customized twinax cable for full rack setup ex factory cable length is selected by requirement in the factory pBrocade branded cable passive twinax cable 1 customized twinax cable for full rack setup ex factory cable length is selected by requirement in the factory branded cable pmax 2x per controller J pm 2x per controller ye 2x per controller separate orderable 1 OGb Ethernet cables in SA only shown in cabling view o 26361 F3989 L102 26361 F3989 L105 26361 F3989 L110 26361 F3873 L501 26361 F3873 L503 26361 F3873 L505 SFP active Twinax Cable Fujitsu 2m SFP active Twinax Cable Fujitsu 5m SFP active Twinax Cable Fujitsu 10m SFP active Twinax Cable Brocade 1m SFP active Twinax Cable Brocade 3m SFP active Twinax Cable Brocade 5m 26361 F4571 L101 26361 F45
40. se only 2014 09 05 2014 09 05 2014 09 02 2014 09 02 204 0001 E A e Fujitsu Technology Solutions x86 PRIMERGY Serve 30 of 30
41. t Cache Hyper Threading HT 2133 MHz DDR4 Bus 9 6 GT s QPI Bus occupies socket for one CPU Xeon E5 2650v3 10C 20T 2 30GHz 25MB 9 6GT s 2133MHz 105W Xeon E5 2600v3 R Frequency Optimized 1x 64 bit Intel Xeon 10 20MB Smart Cache Hyper Threading HT 1866 amp 2133 MHz DDR4 Bus 8 0 amp 9 6 GT s QPI Bus occupies socket for one CPU Xeon E5 2623v3 4C 8T 3 00GHz 10MB 8 0GT s 1866MHz 105W 26361 F3849 E123 526361 3849 150 Xeon E5 2600v3 Advanced 2133 MHz DDR4 Bus 9 6 GT s QPI Bus occupies socket for one CPU 1x 64 bit Intel Xeon 25 30MB Smart Cache Hyper Threading HT Max DDR4 Bus Speed depends on max DDR4 Bus Speed from the CPU and max DDR4 Memory Speed and max memory modules on one memory channel Loose CPU components are available under the following order code S26361 F3849 L4xx xx depends on the CPU type Below CPU SKU s have to be ordered twice Single CPU configuration is only possible on Special Release Request Max two CPU s can be selected per basic unit One of following CPU s has to be selected as first CPU for an orderable basic unit Xeon E5 2660v3 10C 20T 2 60GHz 25MB 9 6GT s 2133MHz 105W S26361 F3849 E160 Xeon E5 2670v3 12C 24T 2 30GHz 30MB 9 6GT s 2133MHz 120W 26361 F3849 E170 Xeon E5 2680v3 12C 24T 2 50GHz 30MB 9 6GT s 2133MHz 120W S26361 F3849 E180 Xeon E5 2690v3 12C 24T 2 60GHz 30MB 9 6GT s 2133MHz 135W S26
42. upgrade options 526361 526361 max X times per system max X times per system X times In one chapter you can only select as many components here 4x as the arrow indicates 4x Please note that there are information symbols which indicate necessary information o For further information see http ts fujitsu com products standard_servers inc internet https partners ts fujitsu com com order supply configurators primergy_config current Pages default aspx extranet Fujitsu Technology Solutions x86 PRIMERGY Serve 2 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Configuration diagram PRIMERGY RX2540 M1 LFF System unit 1 with up to 4x 8x or 12x 3 5 Hard disk drives Motherboard front side Memory CPU1 Channel A B C Bank 1 Modules Memory CPU2 us por Processor Il rear side Fan 1 Fan 5 are standard Redundant power supply option full height slot full height slot PCI ax 1 o CPU2 low profile slot Internal slot for 3rd modular RAID Controller full height slot full height slot Possibility to install PCle riser with 2x x8 slots or x16 double width IGTIIIIIIII it low profile slot Internal slot for 2nd modular RAID Controller low profile slot Internal slot for 1st modular RAID Controller Key Inc
43. usable for BMC or OS or shared 1x VGA 15 pins 2x USB 3 0 UHCI with 5 GBit s no USB wakeup 2x USB 2 0 UHCI with 480MBit s no USB wakeup 2x or 4x LAN 1Gb RJ45 or 2x LAN 10 Gb SFP or RJ45 1x Service LAN RJ45 Interfaces on the front 2x USB 3 0 UHCI with 5 GBit s no USB wakeup only 1x USB 2 0 for basic unit with 12x 3 5 HD and with 24 x 2 5 HD 1x VGA 15 pins as an option not for basic unit with 12x 3 5 HD and with 24 x 2 5 HD Interfaces internal 1 port for UFM Module 1 port for backup device USB3 0 USB 3 0 Type A Connector 1x SATA 3Gbit interface for ODD 1x SATA 3GBit for DOM 8x SATA 3Gbit interface for 8 SATA HD first release for 4 SATA HD only Software ServerView Suite Software package incl ServerStart ServerBooks Management Software and Updates Documentation engl multilingual on CD Fujitsu Technology Solutions x86 PRIMERGY Serve 4 of 30 System configurator and order information guide PRIMERGY RX2540 M1 Status 2014 09 30 Cables included in basic unit onnections SAS 1 SATA ODD O SATA 2 1SAS cables to HDDs 3 Hx cable for SAS signaling Note Rack Mounting kit and Power Cord for RX2540 1 is not included in the basic unit and has to be configured separately No PSU included in Base Unit Basic unit is without CPU and Memory For an orderable basic unit one CPU first CPU and one memory first memory has to be selected Bas
Download Pdf Manuals
Related Search