Asrock C2750D4I
Contents
1. Open USB Selection Jumper 13 23 3 USB SELI 00 Oe e No 10 3 pin USB SEL2 2 3 No 19 Ls Oe e Support Support Rear USB 2 0 ports x 2 Rear USB 2 0 ports x 1 Front USB header x 1 Front USB header x 2 Default 17 2 6 Onboard Headers Connectors Onboard headers and connectors are NOT jumpers Do NOT place jumper caps over these headers and connectors Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard You can see p 6 or p 7 for motherboard layout Serial ATA3 Connectors SATA_0 No 32 SATA_1 No 31 No 8 SATA3 MI No 9 SATAIII 0 No 11 SATAIII MI No 12 SATAIII M2 No 14 SATAIII M3 No 15 SATA3 SATA3 MI SATAII z _ SATAIII M2 SATAIII M3 These eight Serial ATA3 SATA3 connectors support SATA data cables for internal storage devices The current SATA3 interface allows up to 6 0 Gb s data transfer rate Serial ATA2 Connectors 5 2 No 30 SATA_3 No 29 SATA_4 No 28 SATA_5 No 27 SATA 2 SATA 3 SATA 4 SATA 5 These four Serial 2 5 2 connectors support SATA data cables for internal storage devices The current SATA2 interface allows up to 3 0 Gb s data transfer rate USB 2 0 Header 9 pin USB 2 3 22 USB_PWR B A USB_PWR2. for the Web Server 15 role rahuta ratdaton of cole thet Pou tp serve cusitomaatione tau 26 defsul and HTTP ara kaq server activity and cyra ra stab cortert compress 5 Click Install to start installing Net Framework 3 5 1 Confirm Installation Selections s Patres rata the roles services ar fewtures cick iratai a 1 yurata beter Rerin CP Thee ene ragt reed to be restarted afte te nralstor compita MET Framework 3 5 1 Features Framework 251 Pra eral z 2 6 After the installation completes click Close The feliceang raz raka sacan ce vara reidai niccemidy 1 below jy Virdee astrea updating a ret omre your rud p eutaleci rola Sastra updated on Wiedees Update n Control Pans Fremework 351 Features o leat ben The fofcvang features cere rutalac AMET framework 5 5 1 59
3. Rack Stable and Reliable Solution Motherboard C2 19004 1750041 1 User Manual English gt 22 rm rm 4 i 00 m syed Aujenp ubisag ysngoy OPEN uondwnsuog J3A04 S 87 1eaH 5597 81n13811U31V ajqixal4 puepueys Ansnp Version 1 0 Published November 2014 Copyright 2014 ASRock Rack Inc All rights reserved Copyright Notice No part of this documentation may be reproduced transcribed transmitted or translated in any language in any form or by any means except duplication of documentation by the purchaser for backup purpose without written consent of ASRock Rack Inc Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies and are used only for identification or explanation and to the owners benefit without intent to infringe Disclaimer Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice and should not be constructed as a commitment by ASRock Rack ASRock Rack assumes no responsibility for any errors or omissions that may appear in this documentation With respect to the contents of this documentation ASRock Rack does not provide warranty of any kind either expressed or implied including but not limited to the implied warranties or conditions of merchantability o
4. Disk S M A R T Disabled Hard Disk S M A R T Use this item to enable or disable the S M A R T Self Monitoring Analysis and Reporting Technology feature Marvell 9230 SATA3 0 3 Operation This item is for Marvell 9230 5 0 3 ports Use this to select Marvell SATA3 mode Configuration options Enabled and Disabled The default value is Enabled Bootable Marvell 9230 SATAIII Use this to enable or disable Marvell SATA Boot ROM Marvell 9172 SATA3 MO 1 Operation This item is for Marvell 9172 SATA3_MO0 and ports Use this to select Marvell SATA3 mode Configuration options Disabled IDE Mode AHCI Mode and RAID Mode The default value is AHCI Mode Bootable Marvell 9172 5 Use this to enable or disable Marvell SATA Boot ROM We recommend to use Intel SATA ports SATA_0 to SATA 5 ports for your bootable devices This will minimum your boot time and get the best performance But if you still want to boot from Marvell SATA3 controller you can still enable this in UEFI 29 30 3 3 3 Configuration Aptio Setup Utility ACPI HPET Table Enabled ACPI HPET Table Enable the High Precision Event Timer for better performance PCIE Devices Power On Use this item to enable or disable PCIE devices to turn on the system from the power soft off mode RTC Alarm Power On Use this item to enable or disable RTC Real Time Clock to power on the system
5. only support AHCI mode SUSE Enterprise Linux Server 11 SP1 32 64 bit FreeBSD 9 1 32 64 bit Fedora Core 19 64 bit Ubuntu 12 04 12 10 64 bit Virtual VMWare ESXi 5 5 Temperature Operation temperature 10 C 35 C Non operation temperature 40 C 70 For C2750D4I C2550D4I motherboard please install a CPU fan when the airflow throught the heat sink is below 2 CFM Cubic Feet per Minute for bet ter ventilation For detailed product information please visit our website http www asrockrack com Since Intel Edisonville platform does not support RSTe feature it is decided by OS inbox A driver behavior The Avoton processor integrated I O s SATA2 3 driver is used inbox not Intel So according to Windows 2008 R2 OS operation behaviors it needs to take about 60sec refresh timer when users unplug SATA device You have to go in manually to detect the drive and recognize it In other words the operation system will quickly response the SATA plug in out status about 10sec when users install the RSTe driver if the platform supports it C2X50D4lSeries 1 3 Unique Features ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM This conve nient BIOS update tool allows you to update system BIOS without entering operating systems first like MS DOS or Windows With this utility you can press the F6 key during the POST or the F2 key to enter into the BIOS setup menu to a
6. 3 Auxiliary Panel Header AUX PANELI Intelligent Platform Management Bus header IPMB 1 BMC SMB Header BMC SMB2 BMC SMB Header BMC SMBI SATA2 Connector SATA 5 Blue SATA2 Connector SATA 4 Blue SATA2 Connector SATA 3 Blue SATA2 Connector SATA 2 Blue SATA3 Connector SATA 1 White SATA3 Connector SATA 0 White 10 1 5 Panel C2550D4I C2750D4I C2750D4I e e 1 Serial Port COMI 5 RJ 45 Port LAN1 2 D Sub Port VGA1 6 RJ 45 Port LAN2 3 Dedicated IPMI LAN Port 7 UID Switch LED UID SW LEDI 4 USB2 0 Ports USB 0 1 LAN Port LED Indications There are two LED next to the LAN port Please refer to the table below for the LAN port LED indications ACT LINK LED SPEED LED LAN Port Dedicated IPMI LAN Port LED Indications Activity Link LED Speed LED Status Description Status Description Off No Link Off 10Mbps connection Blinking Data Activity Orange 100Mbps connection 100Mbps connection Green 1Gbps connection There are two LEDs each LAN port Please refer to the table below for the LAN port LED indications ACT LINK LED SPEED LED LAN Port LAN Port LANI LAN2 LED Indications Activity Link LED Speed LED Status Description Status Description Off No Link Off 10Mbps connection Blinking Data Activity Off 100Mbp
7. 3 3 4 Super IO Configuration fiptio Setup Utility Deep Sleep Use this to configure Deep Sleep The default value is Disabled Serial Port 1 Configuration Use this item to configure the onboard serial port 1 SOL Configuration Use this item to configure the onboard serial port 2 31 3 3 5 Serial Port Console Redirection Console Redirection Disabled Console Redirection Use this option to enable or disable Console Redirection Console Redirection Settings Use this option to configure Console Redirection Settings 32 3 3 6 PCI Subsystem Settings tio Setup Utilitu Above 4G Decoding Disabled Above 4G Decoding Use this option to enable or disable 64bit capable devices to be decoded in above 4G address space only if system supports 64bit PCI decoding 33 3 3 7 8608 Configuration Primary Graphics Adapter This allows you to select Onboard or PCI Express as the boot graphic adapter priority The default value is PCI Express Onboard VGA This allows you to enable or disable the Onboard VGA feature Onboard LAN1 This allows you to enable or disable the Onboard LANI feature Onboard LAN2 This allows you to enable or disable the Onboard LAN2 feature 34 3 3 8 Voltage Aptio Setup Utility DRAM Voltage Auto DRAM Voltage Use this to select DRAM Voltage The default value is Auto 35 36 3 4 H W Monitor Screen Hardware Health Ev
8. 31 36 38 39 41 42 44 45 48 49 50 52 53 53 53 53 53 53 53 54 54 56 53 Returning Merchandise for Service 56 Chapter 6 Net Framework Installation Guide 57 6 1 Installing Net Framework 3 5 1 For Server 2008 R2 57 Chapter 1 Introduction Thank you for purchasing ASRock Rack C2X50D4I Series motherboard a reliable motherboard produced under ASRock Rack s consistently stringent quality control It delivers excellent performance with robust design conforming to ASRock Rack s commitment to quality and endurance In this manual chapter 1 and 2 contains introduction of the motherboard and step by step guide to the hardware installation Chapter 3 and 4 contains the configuration guide to BIOS setup and information of the Support CD Because the motherboard specifications and the BIOS software might be updated the con A tent of this manual will be subject to change without notice In case any modifications of this manual occur the updated version will be available on ASRock Rack website without Jurther notice You may find the latest memory and CPU support lists on ASRock Rack website as well ASRock Rack s Website www ASRockRack com If you require technical support related to this motherboard please visit our website for specific information about the model you are using http www asrockrack com support 1 1 Package Contents ASRock Rack C2550D4I C2750D4I 2750041 Motherboard Mini ITX F
9. enable to disable fast boot which skips memory training and attempts to boot using last known good configuration DRAM Frequency If Auto is selected the motherboard will detect the memory module s inserted and assign the appropriate frequency automatically ECC Support Use this item to enable or disable DDR ECC Support 41 3 5 3 South Bridge Chipset Configuration Aptio Setup Utility Cc Restore on AC Power Loss Select the power state after a power failure If Power Off is selected the power will remain off when the power recovers If Power On is selected the system will start to boot up when the power recovers SATA Configuration Aptio Setup Utility C American Megat 42 SATA 2 Controller SATA 3 Controller Use this item to enable or disable SATA Controller SATA Mode Selection Use this to select SATA mode Configuration options Disabled IDE Mode AHCI Mode and RAID Mode The default value is AHCI Mode AHCI Advanced Host Controller Interface supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advantages SATA Link Power Management Use this item to configure SATA Aggressive Link Power Management SATA x Depending on how many SATA ports you have you will see SATA x x means number listed on the screen with its status indicated as SATA device Model Name or Not Detected SATA xRx Setting Adjust SA
10. lt gt gt key to choose among the selections the menu bar and then press Enter to get into the sub screen 3 1 2 Navigation Keys Please check the following table for the function description of each navigation key Navigation Key s Function Description Pu Mum Moves cursor left or right to select Screens Moves cursor up or down to select items change option for the selected items lt gt Switch next function lt Enter gt bring up the selected screen lt PGUP gt Go to the previous page lt PGDN gt Go to the next page lt HOME gt Go to the top of the screen lt END gt Go to the bottom of the screen lt F1 gt display the General Help Screen lt F7 gt Discard changes and exit the UEFI SETUP UTILITY lt F9 gt Load optimal default values for all the settings lt 10 gt Save changes and exit UEFI SETUP UTILITY lt 12 gt Print screen lt ESC gt Jump to the Exit Screen or exit the current screen 25 3 2 Main Screen Once you enter the UEFI SETUP UTILITY the Main screen will appear and display the system overview The Main screen provides system overview information and allows you to set the system time and date etup Utilitu Sustem Date 26 3 3 Advanced Screen In this section you may set the configurations for the following items Easy RAID Install er Storage Configuration ACPI Configuration Super IO Configuration Serial Port Con sole Redirectio
11. 50041 17 0cm 6 7 ATXPWR1 gt gt LAN2 LAN1 17 0cm 6 7 in 1 2 BMC SMB 1 1 1 irasra a era I mcm BMC E whe r 1 1 ROM l Du PCIE1 7 5 2550041 a TU 25 24 23 22 21 20 19 18 17 No Description 1 2 MN Boo Bony Uu 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Power Connector ATXPWRI 2 x 240 pin DDR3 DIMM Slots DDR3_A1 DDR3_A2 Rear Fan Connector REAR FANI Rear Fan Connector REAR FAN2 CPU Fan Connector CPU FANI CPU Fan Connector CPU FAN2 2x240 pin DDR3 DIMM Slots DDR3 DDR3 B2 SATA3 Connector 5 MO White SATA3 Connector SATA3 MI White USB Selection Jumper USB SEL1 SATA3 Connector SATAIII 0 White SATA3 Connector SATAIII_M1 White System Panel Header PANELI SATA3 Connector SATAIII M2 White SATA3 Connector SATAIII M3 White Front Fan Connector FRNT FAN2 Front Fan Connector FANI TPM Header 51 USB Selection Jumper USB SEL2 BMC SMB Header BMC SMB3 Non Maskable Interrupt Button NMI BTNI USB 2 0 Header USB 2
12. 8211E for dedicated management GLAN Watch Dog NMI Gracphics Controller ASPEED AST2300 VRAM DDR3 16MB Output Supports D Sub with max resolution up to 1920x1200 60Hz Rear Panel I O VGA Port 1x D Sub USB 2 0 Port 2 2x RJ45 Gigabit Ethernet LAN ports LAN Port 1x RJ45 Dedicated IPMI LAN port LAN Ports with LED ACT LINK LED and SPEED LED Serial Port 1 COM1 UID Button UID i LED Internal Connector Auxiliary Panel Header 1 includes location button amp LED front LAN LED IPMB Header 1 Fan Header 6 x 4 pin ATX Power 1 24 pin USB 2 0 Header 1 support 1 via headers or 2 via headers controlled by USB_ SEL1 and USB_SEL2 jumper Front Panel 1 System BIOS BIOS Type 64Mb AMI UEFI Legal BIOS Plug and Play PnP ACPI 1 1 Compliance Wake Up Events BIOS Features SMBIOS 2 3 1 Support DRAM Voltage Multi adjustment ASRock Rack Instant Flash Hardware Monito CPU Temperature Sensing Temperature Motherboard Temperature Sensing CPU Rear Front Fan Tachometer F CPU Quiet Fan Allow CPU Fan Speed Auto Adjust by CPU an Temperature CPU Rear Front Fan Multi Speed Control Voltage Monitoring 12V 5V 3 3V CPU Vcore DRAM Voltage 1 1V 1 0V BAT 3 5 5 5 OS Microsoft Windows Server 2008 R2 SP1 64 bit Server 2012 64 bit Linux CentOS 6 4 5 10 x32 and x64
13. Besides two default USB 2 0 ports on the I O panel there is one USB 2 0 header on this motherboard Each USB 2 0 header can support two USB 2 0 ports TPM Header This connector supports Trust 17 51 i lt ed Platform Module TPM a lt 18 9 x e system which can securely 522955045 49 4 a oO eom store keys digital certificates passwords and data A TPM 1 system also helps enhance 452328 2 59989 26 network security protects 9g o EA EM amp digital identities and ensures platform integrity System Panel Header Rc This header accommodates 9 pin PANELI several system front panel No 13 1 functions GND RESET Q HDLED PWRBTN Power Switch Connect to the power switch on the chassis front panel You may configure the way to turn off your system using the power switch RESET Reset Switch Connect to the reset switch on the chassis front panel Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart PLED System Power LED Connect to the power status indicator on the chassis front panel The LED is on when the system is operating The LED is off when the system is in powered off S5 HDLED Hard Drive Activity LED Connect to the hard drive activity LED on the chassis front panel The LED is on when the hard drive is reading or writing data The front panel desi
14. C network parameters using BIOS setup select either Static Dynamic option To configure BMC network parameters using the BMC web interface select Unspecified option When Dynamic or Static is selected do NOT modify the BMC network settings on the IPMI web page BMC Mac Backup Tool Use this to restore BMC Mac from the backup default login information for the IPMI web interface is Username admin Password admin Please refer to the table below for the LAN interface mapping to check the address through either BIOS or Web interface BMCLAN Interface Mapping Table Panel BIOS Menu IPMI Web Page LANI Port NCSI Lan Channel 1 eth0 IPMI Port Lan Channel 2 ethl 5 Server Mgmt tab Example image only IPMI Web Page Network Settings dimit e HER UB Configuration ILE w Network lt Settings Example image only For more instructions on how to set up remote control environment and use the IPMI man agement platform please refer to the IPMI Configuration User Guide or go to the Support website at http www asrockrack com support ipmi asp 47 3 7 Event Logs Aptio Setup Utilit Change Smbios Event Log Settings This allows you to configure the Smbios Event Log Settings View Smbois Event Log This allows you to view the Smbios Event Log 48 3 8 Security Scr
15. Jhongyang S Rd Beitou District Taipei City 112 Taiwan R O C Contents Chapter 1 Introduction 14 1 2 1 3 14 1 5 1 6 Package Contents Specifications Unique Features Motherboard Layout I O Panel Block Diagram Chapter 2 Installation 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 Screw Holes Pre installation Precautions Installation of Memory Modules DIMM Expansion Slots PCI Express Slots Jumper Setup Onboard Headers and Connectors Unit Identification purpose LED Switch Driver Installation Guide Chapter 3 UEFI Setup Utility 3 1 3 1 1 3 1 2 32 3 3 Introduction UEFI Menu Bar Navigation Keys Main Screen Advanced Screen Easy Raid Installer 23 23 24 24 24 25 26 27 28 3 3 4 3 4 3 5 3 6 3 7 3 8 3 9 3 10 Storage Configuration ACPI Configuration Super IO Configuration H W Monitor Screen Hardware Health Event Monitoring IntelRCSetup Processor Configuration North Bridge Configuration South Bridge Chipset Configuration System Event Log Server Management Event Logs Security Screen Boot Screen Exit Screen Chapter 4 Software Support 4 1 4 2 4 2 1 4 2 2 4 2 3 4 2 4 Install Operating System Support CD Information Running The Support CD Drivers Menu Utilities Menu Contact Information Chapter 5 Troubleshooting 5 1 5 2 Troubleshooting Procedures Technical Support Procedures 29 30
16. TA DTLE DATA Values 0 15 Spin Up If enabled for any of ports Staggered Spin Up will be performed and only the drives which have this option enabled will spin up at boot Otherwise all drives spin up at boot External Device Use this item to enable SATA safe removal notifications Please note that the SATA device will be downgraded to SATA2 Hot Plug Designates this port as Hot Plugglable 43 3 5 4 System Event Log 0 Setup Utilitu Whea Settings Use this option to configure Windows Hardware Error Architecture 44 3 6 Server Management Wait For BMC Wait For BMC response for specified time out In PILOTII BMC starts at the same time when BIOS starts during AC power ON It takes around 30 seconds to initialize Host to BMC interfaces System Event Log Enter to configure System Event Logging features during boot BMC Network Configuration Press lt Enter gt to configure BMC Network parameters Configuration Address Source Select to configure BMC network parameters statically or dynamically by BIOS or BMC Configuration options Unspecified Static and Dynamic Unspecified BMC network parameters are configured by BMC itself Static Manually enter the IP Address Subnet Mask and Gateway Address in the BIOS for BMC LAN channel configuration Dynamic IP address Subnet Mask and Gateway Address are automatically assigned by the network s DHCP server 45 46 configure BM
17. ated Populated Populated Populated DIMM only fits one correct orientation It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation 16 2 4 Expansion Slots PCI Express Slots is 1 PCI Express slots on this motherboard PCIE slot PCIE1 PCIE 2 0 x8 slot is used for PCI Express x8 lane width graphics cards Installing an expansion card Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Before installing an expansion card please make sure that the power supply is switched off or the power cord is unplugged Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation Remove the system unit cover if your motherboard is already installed in a chassis Remove the bracket facing the slot that you intend to use Keep the screws for later use Align the card connector with the slot and press firmly until the card is completely seated on the slot Fasten the card to the chassis with screws Replace the system cover 2 5 Jumper Setup illustration shows how jumpers are setup When the jumper cap is placed the pins the jumper is Short If no jumper cap is placed on the pins the jumper is Open The illustration shows a 3 pin jumper whose pin1 and pin2 are Short when a jumper cap is placed on these 2 pins 4
18. ccess ASRock Rack Instant Flash Just launch this tool and save the new BIOS file to your USB flash drive floppy disk or hard drive then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility Please be noted that the USB flash drive or hard drive must use FAT32 16 12 file system 32 31 30 29 28 27 26 1 4 Motherboard Layout C2750D4I 17 0cm 6 7 in ATXPWR1 DDR3_A2 64 bit 240 pin module DDR3_A1 64 bit 240 pin module LAN2 LAN1 s CMOS Battery em ASRock Rack SWB 7 AUX PANELT 2750041 25 24 23 22 21 20 19 18 17 32 31 30 29 28 27 26 C2750D4I 17 0cm 6 7 in gt LAN2 LAN1 ATXPWR1 gt 17 0cm 6 7 in RoHS 99 E 121 TEE SET a PCIE1 TENT FANT C2750D4I e d 25 24 23 22 21 20 19 18 17 I lt 10 11 12 13 14 25
19. een In this section you may set or change the supervisor user password for the system For the user password you may also clear it Aptio Setup Utility Copyright C 2012 American Megat Supervisor Password Set or change the password for the administrator account Only the administrator has authority to change the settings in the UEFI Setup Utility Leave it blank and press enter to remove the password User Password Set or change the password for the user account Users are unable to change the settings in the UEFI Setup Utility Leave it blank and press enter to remove the password 49 50 3 9 Boot Screen In this section it will display the available devices on your system for you to configure the boot settings and the boot priority 13 merican Megatrends gt CSM parameters Boot Option 1 Use this item to set the system boot order Setup Prompt Timeout This shows the number of seconds to wait for setup activation key Bootup Num Lock If this item is set to On it will automatically activate the Numeric Lock function after boot up PCI ROM Priority Use this item to adjust PCI ROM Priority The default value is LegacyROM Full Screen Logo Use this item to enable or disable OEM Logo The default value is Enabled AddOn ROM Display Use this option to adjust AddOn ROM Display If you enable the option Full Screen Logo but you want to see the AddOn ROM information when the s
20. ent Monitoring In this section it allows you to monitor the status of the hardware on your system includ ing the parameters of the CPU temperature motherboard temperature and the critical voltage CPU_FAN1 Setting This allows you to set the speed of CPU fan 1 The default value is Smart Fan CPU_FAN2 Setting This allows you to set the speed of CPU fan 2 The default value is Smart Fan REAR_FAN1 Setting This allows you to set the speed of REAR Fan 1 The default valu is Smart Fan REAR_FAN2 Setting This allows you to set the speed of REAR Fan 2 The default value is Smart Fan FRNT_FAN1 Setting This allows you to set the speed of FRNT Fan 1 The default value is Smart Fan FRNT_FAN2 Setting This allows you to set the speed of FRNT Fan 2 The default value is Smart Fan Watch Dog This allows you to enable or disable the Watch Dog Timer The default value is Disabled 97 3 5 IntelRCSetup this section you may set the configurations for the following items Processor figuration North Bridge Chipset Configuration South Bridge Chipset Configuration and System Event Log Aptio Setup Utility Copy 2013 Americ 38 3 51 Processor Configuration ptio Setup Utilitu Copuright C 2012 merican Megatrends Intel SpeedStep Technology Enable Intel SoeedStep Technology Intel SpeedStep technology is Intel s new power saving technology Processors can switch b
21. etween multiple frequencies and voltage points to enable power saving The default value is Enabled Configuration options Enabled and Disabled This item will be hidden if the current CPU does not support Intel SpeedStep technology Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issues with some power supplies Please set this item to Disabled if above issues occur CPU C State Use this to enable or disable the support of CPU C State No Execute Memory Protection Processors with No Execution Memory Protection Technology may prevent certain classes of malicious buffer overflow attacks Intel Virtualization Technology When this option is set to Enabled a VMM Virtual Machine Architecture can utilize the additional hardware capabilities provided by Vanderpool Technology This option will be hidden if the installed CPU does not support Intel Virtualization Technology 39 40 Intel Turbo Technology Use this item to enable or disable Intel Turbo Boost Mode Technology Turbo Boost Mode allows processor cores to run faster than marked frequency in specific conditions default value is Enabled Active Processor Cores Use this item to select the number of cores to enable in each processor package The default value is 3 5 2 North Bridge Configuration tup Utility Copyright Enabled Fast Boot Use this item to
22. gn may differ by chassis A front panel module mainly consists of power switch reset switch power LED hard drive activity LED speaker and etc When connect ing your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 19 gt w Auxiliary Panel Header 18 pin AUX_PANELI No 14 This header supports multiple 5VSB LED_PWR LAN2_LINK functions on the front panel NC 12C_4_CLK GND 12C_4_DATA LAN1_LINK LED_PWR including front panel SMB internet status indicator 5VSB NC GND LOCATORLED1 LOCATORBTN GND LOCATORLED1 LOCATORLED2 LOCATORLED2 A Front panel SMBus connecting pin 6 1 pin FPSMB Q This header allows you to connect SMBus System Management Bus equipment It can be used for communication between peripheral equipment in the system which has slower transmission rates and power management equipment B Internet status indicator 2 pin LAN1_LED LAN2_LED These two 2 pin headers allow you to use the Gigabit internet indicator cable to connect to the LAN status indicator When this indicator flickers it means that the internet is prop erly connected C Locator LED 6 pin LOCATOR This header is for the locator switch and LED on the front panel Front and Rear Please connect the fan cables to Fan Connectors a the fan connectors and match 4 pin FRNT FANI FAN SPEED t
23. hapter 3 UEFI Setup Utility 3 1 Introduction This section explains how to use the UEFI SETUP UTILITY to configure your system UEFI chip on the motherboard stores the UEFI SETUP UTILITY You may run the UEFI SETUP UTILITY when you start up the computer Please press lt F2 gt or lt Del gt during the Power On Self Test POST to enter the UEFI SETUP UTILITY otherwise POST will continue with its test routines If you wish to enter the UEFI SETUP UTILITY after POST restart the system by pressing lt Ctrl gt lt Alt gt lt Delete gt or by pressing the reset button on the system chassis You may also restart by turning the system off and then back on Because the UEFI software is constantly being updated the following UEFI setup screens and descriptions are for reference purpose only and they may not exactly match what you See your screen 3 1 1 UEFI Menu Bar The top of the screen has a menu bar with the following selections Item Description Main To set up the system time date information Advanced To set up the advanced UEFI features H W Monitor To display current hardware status IntelRCSetup For Intel CPU and chipset settings Server Mgmt To manage the server Event Logs For event log configuration Security To set up the security features am set up the default system device to locate and load the Operating System Exit To exit the current screen or the UEFI SETUP UTILITY Use lt gt key
24. have installed more than one DIMM modules they should be identical with the same brand speed size and chip type 4 Try inserting different DIMM modules into different slots to identify faulty ones 5 Check the settings of the 115V 230V switch on the power supply Unable to save system setup configurations 1 Verify if the battery on the motherboard provides 3VDC Install a new battery if it does not 2 Confirm whether your power supply provides adaquate and stable power Other problems 1 Try searching keywords related to your problem on ASRock Rack s FAQ page http www asrockrack com support 55 56 5 2 Technical Support Procedures If you have tried the troubleshooting procedures mentioned above and problems still unsolved please contact ASRock Rack s technical support with the following information Your contact information Model name BIOS version and problem type System configuration ie pon Problem description You may contact ASRock Rack s technical support at http www asrockrack com support tsd asp 5 3 Returning Merchandise for Service For warranty service the receipt or a copy of your invoice marked with the date of purchase is required By calling your vendor or going to our RMA website http event asrockrack com tsd asp you may obtain a Returned Merchandise Authorization RMA number The RMA number should be displayed on the outside of the shipping carton which
25. he black wire to the ground FAN SPEED CONTROL No 17 stl pin All fans supports Fan Control 4 pin FRNT FAN2 16 FAN_SPEED FAN SPEED CONTROL ND zi ND zi 4 pin REAR FANI FAN_SPEED No 3 FAN_SPEED_CONTROL 4 pin REAR FAN2 No 4 12V FAN SPEED FAN SPEED CONTROL ND zi CPU Fan Connectors 4 pin CPU_FAN1 No 5 4 pin CPU_FAN2 No 6 GND 12V FAN SPEED FAN SPEED CONTROL GND 12V FAN SPEED FAN SPEED CONTROL Ron Please connect the CPU fan cable to the connector and match the black wire to the ground pin Though this motherboard provides a 4 Pin CPU fan Quiet Fan connector 3 Pin CPU fans can still work successfully even without the fan speed control function If you plan to connect a 3 Pin CPU fan to the CPU fan connector on this motherboard please connect it to Pin 1 3 For more details please refer to the Cooler QVL list on the ASRock Rack website ATX Power Connector 24 pin ATXPWRI No 1 1 12 13 24 Please connect an ATX power supply to this connector Though this motherboard provides a 24 pin ATX power connector it can still work if you adopt a traditional 20 pin ATX power supply To use a 20 pin ATX power supply please plug your power supply along Pin 1 and Pin 13 Intelligent Platform Management Bu
26. ike Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the compo nents 3 Hold components by the edges and do not touch the ICs 4 Whenever you uninstall any component place it on a grounded anti static pad or in the bag that comes with the component 5 When placing screws into the screw holes to secure the motherboard to the chassis please do not over tighten the screws Doing so may damage the motherboard Before you install or remove any component ensure that the power is switched off or the power cord is detached from the power supply Failure to do so may cause severe damage to the motherboard peripherals and or components 13 14 2 3 Installation of Memory Modules DIMM This motherboard provides four 240 pin DDR3 Double Data Rate 3 DIMM slots and supports Dual Channel Memory Technology 1 For dual channel configuration you always need to install identical the same brand speed size and chip type DDR3 DIMM pairs 2 Itisunable to activate Dual Channel Memory Technology with only one or three memory module installed 3 Itis not allowed to install a DDR or DDR2 memory module into a DDR3 slot otherwise this motherboard and DIMM may be damaged 4 Please install the memory module on DDR3 AI for the first priority Dual Channel Memory Configuration DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2 Priority 7 Blue White Blue White 1 Populated Populated 2 Popul
27. is mailed prepaid or hand carried when you return the motherboard to the manufacturer Shipping and handling charges will be applied for all orders that must be mailed when service is complete This warranty does not cover damages incurred in shipping or from failure due to alteration misuse abuse or improper maintenance of products Contact your distributor first for any product related problems during the warranty period Chapter 6 Net Framework Installation Guide To let Intel RSTe works properly it is required to install Net Framework Please follow the steps below to enable Net Framework feature on Microsoft Windows Server 2008 R2 6 1 Installing Net Framework 3 5 1 For Server 2008 R2 1 Double click the Server Manager icon in the Windows system tray 2 Click Add Features in the right hand pane meun UU p oe rm M MP usa PUN s roten qno Sorea Emp rq COR M M LLL t yacare rw tat uama PH The conma wara er eget m mane teen ee LORS I s a 0 96 pn on mper w AO ID mt mm oe ss maa s dot I 4 guum D wan we nace d was ee ees w wa tee 57 58 3 Check the box next to Net Framework 3 5 1 and then click Ne
28. n PCI Subsystem Settings PLX 8608 Configuration Voltage and Instant Flash Aptio Setup Utility Copyright C b Easy RAID Installer AN Setting wrong values in this section may cause the system to malfunction Instant Flash Instant Flash isa UEFI flash utility embedded in Flash ROM This convenient UEFI update tool allows you to update system UEFI without entering operating systems first like MS DOS or Windows Just save the new UEFI file to your USB flash drive floppy disk or hard drive and launch this tool then you can update your UEFI only in a few clicks without pre paring an additional floppy diskette or other complicated flash utility Please be noted that the USB flash drive or hard drive must use FAT32 16 12 file system If you execute Instant Flash utility the utility will show the UEFI files and their respective information Select the proper UEFI file to update your UEFI and reboot your system after the UEFI update process is completed 27 3 31 Easy Raid Installer Aptio Setup Utility Copyright 2013 American Megatrends Inc RAID Installer Easy RAID Installer can help you to copy the RAID driver from a support CD to your USB storage device After copying the RAID driver to your USB storage device please change SATA Mode to RAID then you can start installing the OS in RAID mode 28 3 3 2 Storage Configuration Aptio Setup Utility Copyright C 2012 American Megatre
29. orm Factor 6 7 in x 6 7 in 17 0 cm x 17 0 cm Support CD User Manual 6xSerial ATA SATA Cables Optional 1xI O Shield If any items are missing or appear damaged contact your authorized dealer 1 2 Specifications 2550041 C2750D41 2750041 Form Factor Mini ITX Dimension 6 7 x 6 7 17 0 cm x 17 0 cm CPU C2750D4I C2750D4I Intel Octa Core Avoton C2750 Processor C2550D4I Intel Octa Core Avoton C2550 Processor Socket FCBGA1283 SOC Max Capacity 64GB DDR3 ECC UDIMM Socket 4x 240 pin DDR3 DIMM slots Support up to 64GB DDR3 ECC and UDIMM Type Dual Channel DDR3 memory technology Supports DDR3 1600 1333 ECC and UDIMM Voltage 1 5V 1 35V PCIe 2 0 x 8 1 slot x8 mode SATA Controller C2750D4I C2750D4I Intel C2750 2 x SATA3 6 0 Gb s 4 x SATA2 3 0 Gb s C2550D4I Intel C2550 2 x SATA3 6 0 Gb s 4 x SATA2 3 0 Gb s Additional SATA Controller Marvell SE9172 2 x SATA3 6 0 Gb s support RAID 0 1 Marvell SE9230 4 x SATA3 6 0 Gb s support RAID 0 1 10 Interface Gigabit LAN 10 100 1000 Mb s LAN Controller 2 x Intel i210 Supports Wake On LAN Supports Energy Efficient Ethernet 802 3az Supports Dual LAN with Teaming function Supports PXE BMC Controller ASPEED AST2300 IPMI Intelligent Platform Management Interface 2 0 with iKVM support IPMI Dedicated GLAN Features 1 x Realtek RTL
30. r 2008 R2 SP1 64 bit 2012 64 bit Linux compliant Because motherboard settings and hardware options vary use the setup procedures in this chapter for general reference only Refer your OS documentation for more information Please download the Intel SATA Floppy Image driver from the ASRock Rack s website www asrockrack com to your USB drive or simply install the SATA driver from the Support CD while installing OS in SATA RAID mode 4 2 Support CD Information The Support CD that came with the motherboard contains necessary drivers and useful utilities that enhance the motherboard s features 4 2 1 Running The Support CD To begin using the support CD insert the CD into your CD ROM drive The CD automatically displays the Main Menu if AUTORUN is enabled in your computer If the Main Menu does not appear automatically locate and double click on the file ASRSetup exe from the root folder in the Support CD to display the menu 4 2 2 Drivers Menu The Drivers Menu shows the available device s drivers if the system detects installed devices Please install the necessary drivers to activate the devices 4 2 3 Utilities Menu The Utilities Menu shows the application softwares that the motherboard supports Click on a specific item then follow the installation wizard to install it 4 2 4 Contact Information If you need to contact ASRock Rack or want to know more about ASRock Rack welcome to vi
31. r fitness for a particular purpose In no event shall ASRock Rack its directors officers employees or agents be liable for any indirect special incidental or consequential damages including damages for loss of profits loss of business loss of data interruption of business and the like even if ASRock Rack has been advised of the possibility of such damages arising from any defect or error in the documentation or product Fe This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CALIFORNIA USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate a toxic substance controlled in Perchlorate Best Management Practices BMP regulations passed by the California Legislature When you discard the Lithium battery in California USA please follow the related regulations in advance Perchlorate Material special handling may apply see www dtsc ca gov hazardouswaste perchlorate ASRock Rack s Website www ASRockRack com Contact Information Ifyou need to contact ASRock Rack or want to know more about ASRock Rack you re welcome to visit ASRock Rack s website at www ASRockRack com or you may contact your dealer for further information ASRock Rack Incorporation 6F No 37 Sec 2
32. s connection On 100Mbps connection Green 1Gbps connection 11 128 bit Dual Channel Memory x 4 Slots DDR3 1066 1333 1600 DDR3 1066 1333 1600 PCI E X8 SLOT 100MHz Channel B Intel Processor L INTEL 1210 K gt PEX8608 INTEL 1210 gt BMC AST2300 1283 pin psmmar SPI FLASH 64Mb webe xolg 91 SATA 4 Avoton T SATALLI 510 Nuvoton NCT5573D SATA 2 SATA 0 Chapter 2 Installation This is a Mini ITX form factor 6 7 x 6 7 17 0 cm x 17 0 cm motherboard Before you install the motherboard study the configuration of your chassis to ensure that the motherboard fits into it Make sure to unplug the power cord before installing or removing the motherboard Failure to do so may cause physical injuries to you and damages to motherboard components 2 1 Screw Holes Place screws into the holes indicated by circles to secure the motherboard to the chassis A Do not over tighten the screws Doing so may damage the motherboard 2 2 Pre installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings 1 Unplug the power cord from the wall socket before touching any components 2 To avoid damaging the motherboard s components due to static electricity NEVER place your motherboard directly on the carpet or the l
33. s header 4 pin IPMB_1 No 24 GND No connect IPMB_SCL IPMB_SDA This 4 pin connector is used to provide a cabled baseboard or front panel connection for value added features and 3rd party add in cards such as Emergency Management cards that provide management features using the IPMB 21 22 Non Maskable Interrupt Button Header Q pin see p 13 or 15 No 21 POWER 1 CONTROL Please connect a NMI device to this header BMC SMB Headers 5 5 1 26 5 5 2 25 5 5 3 20 m This header is used for the SM BUS devices 27 Unit Identification purpose LED Switch With the UID button You are able to locate the server youre working on from behind a rack of servers Unit Identification purpose LED Switch SZZ UID SW LEDI 2 8 Driver Installation Guide When the UID button on the front or rear panel is pressed the front rear UID blue LED indicator will be turned on Press the UID button again to turn off the indicator To install the drivers to your system please insert the support CD to your optical drive first Then the drivers compatible to your system can be auto detected and listed on the support CD driver page Please follow the order from top to bottom to install those required drivers Therefore the drivers you install can work properly 23 24 C
34. sit ASRock Rack s website at http www ASRockRack com or you may contact your dealer for further information C2 50D4I Series 53 54 Chapter 5 Troubleshooting 5 1 Troubleshooting Procedures Follow the procedures below to troubleshoot your system Always unplug the power cord before adding removing or changing any hardware com A ponents Failure to do so may cause physical injuries to and damages to motherboard components 1 Disconnect the power cable and check whether the PWR LED is off 2 Unplug all cables connectors and remove all add on cards from the motherboard Make sure that the jumpers are set to default settings 3 Confirm that there are no short circuits between the motherboard and the chassis 4 Install a CPU and fan on the motherboard then connect the chassis speaker and power LED If there is no power 1 Confirm that there are no short circuits between the motherboard and the chassis 2 Make sure that the jumpers are set to default settings 3 Check the settings of the 115V 230V switch on the power supply 4 Verify if the battery on the motherboard provides 3VDC Install a new battery if it does not If there is no video 1 Try replugging the monitor cables and power cord 2 Check for memory errors If there are memory errors l Verify that the DIMM modules are properly seated in the slots 2 Use recommended DDR3 1600 1333 1066 non ECC unbuffered DIMMs 3 If you
35. xt Select one or more features to instal tes server Confirmation Features Description Progress T LLL Rests Framework 2 0 APIs with new 3 WEF Activation technologies for building applicatons ST ESOS PERSE TSE Saree BITS or aia eee BitLocker Drive Enor protect your customers pers T Branch mm identity Information enable seamless sed secure communication and Lj Connection Manager Administr abon Kit provide the ability to model a tange of Desktop Experience business processes DeectAccess Management Console _ Falover Clustering Group Policy Management I Lj Ink and Handwnitting Services 1 Internet Printing Clent C Internet Storage Name Server LPR Port Monitor Message Queuing 1 Multipath 1 0 1 Network Load Balancing _ Peer Name Resolubon Protocol Quality Windows Audo Video Experience More about 4 Click Next to continue E Web Server IIS 2 Festes Introduction to Web Server 05 Pole Services ti sing oma nar oen bet t aree nore Web fut ringratsa 72 ASP MET aral Wey za Communicator Prureistion 115 7 0 aie feature ahned eanit dignectics and delegated atwratration adi Things to Rete i Wardens 599 ASEIN Gann eguitatle serwong of Web serve penes eat A ayd dits 1 The
36. ystem boots please select Enabled Configuration options Enabled and Disabled default value is Enabled Boot From Onboard LAN Use this item to enable or disable the Boot From Onboard LAN feature CSM Parameters Use this option to configure the parameters of OpROM execution boot options filter etc Boot Option Filter Use this option to control what devices system can boot to Configuration options UEFI and Legacy Legacy only and UEFI only Launch Storage OpROM Policy Select UEFI only to run those that support UEFI option ROM only Select Legacy only to run those that support legacy option ROM only 51 52 310 Exit Screen Save Changes and Exit When you select this option the following message Save configuration changes and exit setup will pop out Select Yes to save the changes and exit the UEFI SETUP UTILITY Discard Changes and Exit When you select this option the following message Discard changes and exit setup will pop out Select Yes to exit the UEFI SETUP UTILITY without saving any changes Discard Changes When you select this option the following message Discard changes will pop out Select Yes to discard all changes Load UEFI Defaults Load UEFI default values for all the setup questions F9 key can be used for this operation Chapter 4 Software Support 4 1 Install Operating System This motherboard supports Microsoft Windows Serve
Download Pdf Manuals
Related Search