Home

Philips Cinema 21:9 Platinum Series Smart LED TV 58PFL9956T

1. To switch channels press CH or CH on the remote control You can use the number keys if you know the channel number or press Q FIND to open the Channel list to select a channel To switch back to the previous channel press D Back CH CH CH LEN Radio channels If digital broadcasting is available digital radio stations are installed during installation Switch to a radio channel just like you switch to a TV channel A DVB C channel installation usually places radio stations from channel number 1001 onwards Options for watching TV channels If you watch digital broadcast TV channels press z OPTIONS to view the available options What s on e Status Video selection What s on This option shows information on the current and next programme on this channel Use the navigation keys to scroll through text or to go to the next column Status Depending on the broadcast the Status page will show relevant information You can use this information to improve the channel signal or to check if certain services are available 18 Video selection Digital TV channels can offer multi video signals multi feed broadcasts different camera viewpoints or angles of the same event or different programmes on one TV channel The TV shows a message to advise if any such TV channels are available When available press OPTIONS and select Video selection to select your choice Channel list In the Channel list you c
2. With Back you can go back to the previous TV channel or go one step back In a menu Red With the red key you can select the red option or open digital Interactive TV or some IV demonstration clips Green With the green key you can select the green option or the Eco settings Yellow With the yellow key you can select the yellow option Blue With the blue key you can select the blue option Read more about the remote control in Help gt Basics gt Remote control gt Overview Or go to the Q Search page in this Help to look for any topic Press A to select the next TV tour Connecting devices ol c V Use the HDMI connection to connect a DVD Blu ray Disc player or game console The HDMI connection offers the best picture and sound quality and if your device has EasyLink HDMI CEC the TV can add the device to the Home menu automatically When a device is added to the Home menu you can select it to watch its programme If the device has no EasyLink or you do not use the HDMI connection you must add the connected device in the Home menu using Add your devices Read more about Add your devices in Help gt Basics gt Menus gt ft Home Read more about using EasyLink in Help gt Basics gt Remote control gt Operate devices In the chapter Help gt Connections drawings like these will help you to connect most common devices Getting started TV tour
3. al af E HD TV This TV can display High Definition programmes but to enjoy HD TV you need to get programmes in HD first If you are not watching HD programmes the picture quality will be that of a normal TV Watch HD TV programmes from a Blu ray Disc player a digital HD receiver connected with HDMI and with a subscription to HD programmes e over the air HD broadcasts channels offering HD on a digital network an HD game console connected with HDMI and playing an HD game HD video clip To experience the stunning sharpness and picture quality of HD TV you can start the High Definition video clip from the Home menu Press Home gt Setup gt Watch demos on the second page of the Setup menu Contact your dealer for more information Go to www philips com support to find FAQs featuring the list of HD channels or providers in your country Getting started TV tour 1 2 Setting up Stand or wall mounting Always make sure to position the TV on a solid surface when it is mounted on the TV stand Wall mounting With the foot and neck of the TV stand you can mount the TV to the wall Combine the foot and neck to make a swivel mount or alternatively use only the foot to mount the TV close to the wall Find all mounting instructions in the Quick Start Guide that came with the TV In case you lost this guide you can download the guide from www philips com Use the product type number
4. Contact information Argentina 0800 8888 7532 gratuito Magyarorsz g 06 80018 189 Ingyenes h v s Belgie Belgique 0800 80 190 gratis gratuit Nederland 0800 023 0076 gratis C CHAT www philips com support C CHAT www philips com support Brazil 0800 701 0203 Norge 22 0 8111 lokalsamtale Sao Paulo 11 2121 0203 C CHAT www philips com support Bbaapna T2592 402 29 26 Osterreich 0800 180 016 kostenlos MecteH pasroBop C CHAT wwwohilips com support Ceska republika 800 142840 Bezplatny hovor Polska 022 3491504 po czenie lokalne China FH 4008 800 008 Danmark 3525 8759 lokalt opkald Portugal 800 780 903 gr tis CJ CHAT www philips com support C CHAT www philips com support Deutchland 0800 000 7520 kostenlos Romana 0800 894910 gratis C CHAT www philips com support Poccua E Aada O 0800 3122 1280 Mockea 495 961 1111 MecTHbi 380HOK KANON xcopic xp eon 8 800 200 0880 IMecrHbl 3B0HOK Espana 200 800 655 gratuito C MAT www philips com support C CHAT www philips com support Suisse Schweiz Svizzera Estonia 6008600 local 0800 002 050 kostenlos gratuit gratuito France 0805 025 510 gratuit Cp6nja 381 114 440 841 Lokalni poziv C CHAT www philips com support Slovakia 0800 004537 Bezplatny hovor Hrvatska 01 6403 776 Lokalni poziv Slovenija 00386 1 280 95 00 Lokalni klic Italia 800 088 774 gratuito Suomi 09 23113415 paikallispuhelu C CHAT www philips com support C CHAT www phili
5. Read more about renting videos in Help gt Smart TV gt Net TV gt Video stores Insert the card Make sure to unlock the SD memory card before you insert it lo format the SD card switch on the TV and insert the SD card into the SD card slot The TV will automatically start formatting Leave the SD card permanently in the slot 66 Connections SD card 5 7 Common interface CAM CAM Scrambled digital TV channels can be decoded with a Conditional Access Module CAM Digital TV service operators provide the CAM when you subscribe to their services Contact a digital TV service operator for more information and to see terms amp conditions Insert a CAM Switch off the TV before inserting a CAM Look on the CAM for the correct method of insertion Incorrect insertion can damage the CAM and the TV Look for the common interface slot on the back of the TV Gently insert the CAM as far as it will go and leave it in the slot permanently It can take a few minutes before the CAM is activated Removing the CAM will deactivate the service on TV Watching a CAM service If a CAM is inserted and subscription fees have been paid the TV shows the programme from the digital TV service provider The applications their function the content and the onscreen messages all come from the CAM service CAM settings To set passwords or PIN codes for the CAM service press f gt Setup gt Channel settings gt Common Interface Sele
6. TV Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet Care Never touch push rub or strike the screen with any object Unplug the IV before cleaning Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV o avoid deformations and colour fading wipe off water drops as quickly as possible Avoid stationary images as much as possible Stationary images are images that remain onscreen for extended periods of time Stationary images include onscreen menus black bars time displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage Temperature and humidity In rare occasions depending on temperature and humidity minor condensation can occur on the inside of the TV glass front on some models To prevent this do not expose the TV to direct sunlight heat or extreme humidity If condensation occurs it will disappear spontaneously while the TV is playing for a fe
7. keys Select the key you need and press OK To hide the device keys press Back 14 In general these keys open the following device menus 1 Home menu 2 Setup menu 3 Disc menu disc content 4 Pop up menu 5 Options menu 6 Programme guide 7 Media selection One Touch Play Insert a disc into an EasyLink HDMI CEC device and press Play on the device The TV switches on from standby and starts playing the disc System Audio Control If you connect an EasyLink audio system you can listen to the audio from the TV through the audio system The TV speakers are muted automatically You can control the volume of the audio system with the TV remote control Surround mode With recent Philips devices you can change the surround sound setting of the device on the TV To change this setting press fM ADJUST select Surround mode and press OK On Next mode press OK to toggle through the available modes on the device Smart sound With recent Philips devices you can change the Smart sound setting of the device on the TV To change this setting press fM ADJUST select Smart sound and press OK Select a sound mode from the list Screen off If a recent Philips audio device only sends audio to the TV the device may suggest switching off the TV screen To switch off the screen when this message appears select Screen off and press OK To switch the screen back on press A Home System Standby Press on the remote con
8. 14 Surround sound 17 84 System standby 14 T Text dual screen 36 Text freeze 36 Text setup 37 Text T O P overview 36 TV network name 45 TV tour 6 U Universal access 47 USB Hard Drive 33 USB Hard Drive installation 33 USB keyboard 62 USB mouse 63 USB browse 31 V Video CVBS connection 51 Video selection 18 W Wall colour 40 Watch TV 18 WEP security encryption 44 WPA security encryption 44 WPS Wi Fi Protected Setup 44 Index 85 Europe CE Declaration of conformity English Hereby Philips Innovative Applications N V declares that this televi sion is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Deutsch Hiermit erkl rt Philips Innovative Applications N V dass sich das Fernsehgerat in bereinstimmung mit den grundlegenden Anforder ungen und den brigen einschlagigen Bestimmungen der Richtlinie 1999 5 EG befindet Francais Par la pr sente Philips Innovative Applications N V d clare que cet appareil de t l vision est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Nederlands Hierbij verklaart Philips Innovative Applications N V dat deze televisie in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Espanol Por medio de la presente Philips Innovative Applications N V declara que el televisor cumple con los requisit
9. 3D depth Use the slider bar to set the 3D depth and press OK Specifics e If a 3D TV broadcast is switched to 2D the TV shows only the 3D left picture e 3D is not available in Multi view Optimal 3D viewing For an optimal 3D viewing experience we recommend that you sit at least 3 times the height of the TV screen away from the TV but no further than 6 metres away avoid fluorescent lighting such as TL lighting or certain energy saving light bulbs which operate on a low frequency and direct sunlight as they may interfere with the 3D experience 3D U Health warning e If you or your family has a history of epilepsy or photosensitive seizures consult a medical professional before exposing yourself to flashing light sources rapid image sequences or 3D viewing o avoid discomfort such as dizziness headache or disorientation we recommend not watching 3D for extended periods of time If you experience any discomfort stop watching 3D and do not immediately engage in any potentially hazardous activity for example driving a car until your symptoms have disappeared If symptoms persist do not resume watching 3D without consulting a medical professional first Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above Watching 3D is not recommended for children under 6 years of age as their visual system is not fully developed yet Do not use
10. Keyboard settings and press OK TV keys on your keyboard For channel renaming Enter 4 OK Backspace delete character before cursor Navigation keys navigate within a text field To switch between keyboard lay outs if a secondary lay out is set press the Alt Shift keys simultaneously 62 Connections Connect more devices For use with Net TV Tab and Shift Tab Next and Previous Home scroll to the top of the page End scroll to the bottom of the page Page Up jump one page up Page Down jump one page down t zoom in one step zoom out one step fit to width USB mouse You can connect a USB mouse to navigate pages on the Internet On an Internet page you can select and click on links more easily The USB mouse cannot navigate in Net TV app pages nor navigate in the TV menus Install Switch the TV on and connect the USB mouse to one of the USB connections on the side of the TV You can also connect the USB mouse to a connected USB keyboard Mouse clicks Left click OK Right click Back You can use the scroll wheel to scroll pages up and down TV as PC monitor You can connect the TV to your home network wireless With Wi Fi MediaConnect you can use the TV as a PC monitor Read Help gt Setup gt Network gt Wi Fi MediaConnect Read on to connect a computer to the TV as a PC monitor wired You can use a VGA cable or a DVI to HDMI
11. OK Then press f and select Setup Select TV settings navigate to the individual setting and adjust it To return to the original smart setting values undo the adjustments you made by first setting the TV in the smart setting you want to reset Then press ft gt Setup gt TV settings select Reset and press OK Read more about adjusting separate settings in Help gt Setup gt Picture and Sound and Ambilight Smart picture list Personal Your choices made in Personalise picture and sound Vivid Ideal for daylight viewing Natural Natural picture settings Cinema Ideal for watching movies e Game Ideal for gaming Energy saving Energy conscious settings e Standard Factory standard settings Photo Ideal for viewing photos e ISF Day and ISF Night ISF Calibration settings Smart sound list Personal Your personal choices made in Personalise picture and sound e Standard Factory standard News Ideal for speech e Movie Ideal for watching movies e Game Ideal for gaming Drama Ideal for TV soaps Sports Ideal for sports programmes Picture format Basics Watch TV If black bars appear on the screen you can adjust the picture format to a format that fills the screen While watching TV press ttf ADJUST to open the Adjust menu and select Picture format Select a format from the list and press OK Picture formats The following formats are available according to the picture
12. To switch off Ambilight when Scenea is on press tf ADJUST Or press Ambilight on the front of the TV Energy saving To switch the TV to the energy saving mode press flf ADJUST select Smart picture and press OK Select Energy saving Specifics With Scenea switched on the TV will automatically switch to standby after 4 hours You will be warned 1 minute before switch off This automatic switch to standby prevents unnecessary energy use in case you forget that Scenea Is on If the sleep timer is set the TV will also switch to standby after the set time has elapsed Scenea has no sound Wi Fi Media Connect With Wi Fi MediaConnect you can bring up project your PC screen on to the TV screen wirelessly You can project video music presentations or other content playing on your laptop or desktop PC Before you can project the PC screen on to TV you must install the Wi Fi MediaConnect software on your PC Read more about installing the Wi Fi MediaConnect software in Help gt Setup gt Network gt Wi Fi MediaConnect Start projecting To start projecting the PC screen on to the TV click on the small TV icon in the taskbar at the bottom nght of the PC screen Your PC screen appears on your TV screen Stop projecting To stop projecting click on the TV icon again 32 Wi Fi MediaConnect Help To read the Wi Fi MediaConnect Help right click the TV icon in the taskbar of the PC and select Help Specifics The playbac
13. adapter Use a VGA cable to connect the PC to the VGA connector and an audio L R cable to connect the VGA Audio L R to the back of the TV Connections Connect more devices 63 pute Com AUDIO IN DVI VGA Use a DVI to HDMI adapter to connect the PC to HDMI and an audio L R cable to connect the Audio L R to the back of the TV AUDIO IN DVI VGA Ideal TV setting Set the TV picture format to Unscaled for the sharpest picture quality While watching TV press ff ADJUST select Picture format and select Unscaled For a list of supported resolutions see Help gt Specifications gt Display resolutions 64 Connections Connect more devices 5 5 Network Wireless To set up the wireless network connection read Help gt Setup gt Network Wired To set up the wired network connection read Help gt Setup gt Network Connect the router to the TV with a network cable To fulfil EMC regulations use a shielded FTP Cat 5E Ethemet cable Router Connections Network 65 5 6 SD card Memory size To store videos downloaded from a Video store on Net TV you need to insert an SD memory card into the TV SD card slot Once formatted leave the card permanently in the slot SD memory card size Use a SD HC High Capacity memory card with at least 4GB of storage capacity For high definition HD video use an SD card with at least 8GB of storage capacity Use a speed class 2 card or more
14. away from the wall Adjust Ambilight according to the colour of your wall at home in the Wall colour setting o prevent poor infrared remote control reception position your devices out of sight of Ambilight Adjust To open the Adjust menu press ff ADJUST To close press ff again Switch Ambilight on or off In the Adjust menu select Ambilight and press OK Switch Ambilight On or Off You can also press Ambilight on the TV Ambilight dynamic In the Adjust menu select Ambilight dynamic and press OK Adjust the speed at which Ambilight responds to onscreen Images Read more about other Ambilight settings in Help gt Setup gt Ambilight gt Settings Settings More Ambilight settings are available in the Ambilight settings menu in Setup To change these settings press ft and select Setup gt TV settings gt Ambilight Ambilight brightness To set the Ambilight brightness select Ambilight brightness and press OK Adjust the light output of Ambilight 40 Ambilight colour To set the Ambilight colour select Ambilight colour and press OK Select Dynamic if Ambilight should respond to onscreen images or select one of the fixed colours Select Custom if you want to set a specific fixed colour Custom colour To set an Ambilight colour of your own select Custom in the Ambilight Colour menu With Custom selected you can open the Custom colour menu Select Palette to choose your own colour Ambilight
15. broadcast or record your favourite show Read more about Smart TV in Help gt Smart TV Read more about setting up the Internet connection in Help gt Setup gt Network 3D Full HD On this TV you can watch 3D programmes and movies in full High Definition resolution with 3D Max When 3D programmes are broadcast or you start a 3D movie the TV switches to 3D All you need to do is to put on your active 3D glasses Read more about 3D in Help gt Basics gt Watch 3D The remote control To adjust the volume To switch TV channels To open or close the Home menu f Open the Home menu as a starting point to operate the TV In the Home menu you can start or stop a TV activity such as watching TV Watch TV or watching a movie from a connected DVD player Getting started TV tour To open or close the FIND menu Q Open the Find menu to open the list of channels while you are watching TV channels or the list of videos and music while you browse your PC on TV To open or close the ADJUST menu ff Open the Adjust menu to quickly adjust the picture and sound settings You can set the Smart picture setting to Game which is ideal for gaming or change the Smart sound setting of the TV loudspeakers To open or close the OPTIONS menu Open the Options menu to select optional settings related to what you are watching or doing on TV Getting started TV tour Back
16. in Help gt Basics gt Watch TV gt Picture format Smart picture Smart sound You can set the TV to the pre defined setting that best suits What you re watching Read more about Smart settings in Help gt Basics gt Watch TV gt Smart picture and sound Speakers To hear the sound through the TV speakers close Help press ADJUST select Speakers and select TV Select Amplifier if you want to hear the sound through a connected Home Theatre System or Amplifier These settings temporarily override any EasyLink settings Surround To switch the TV automatically to the best surround sound mode only available when a Home Theatre System is connected close Help press tf ADJUST select Surround and select On Picture shift You can shift the picture on screen in a vertical or a horizontal direction to view subtitles fully depending on the TV input While watching TV press tf ADJUST select Picture shift and press OK Shift the picture with the navigation keys Press OK to stop Picture shift OPTIONS With the OPTIONS menu you select optional settings related to what you are watching or doing on TV Press z OPTIONS at any time to see which options are available To close the menu press OPTIONS again Basics Menus 17 2 3 Watch TV Switch channels To watch TV and switch channels make sure the Watch TV option is selected in the Home menu To watch TV press fft select Watch TV and press OK
17. o wiadcza e Telewizor jest zgodny z zasadniczymi wymogami oraz pozosta ymi stosownymi postanowieniami Dyrektywy 1999 5 EC Magyar Alul rott Philips Innovative Applications N V nyilatkozom hogy a telev zi megfelel a vonatkoz alapvet k vetelm nyeknek s az 1999 5 EC ir nyelv egy b el r sainak esky Philips Innovative Applications N V t mto prohla uje e tento televizor je ve shod se z kladn mi po adavky a dal mi p slu n mi ustano ven mi sm rnice 1999 5 ES Slovensky Philips Innovative Applications N V tymto vyhlasuje Ze tento telev zor sp a z kladn po iadavky a v etky pr slu n ustanovenia Smernice 1999 5 ES Slovensko Philips Innovative Applications N V izjavlja da je ta televizor v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolocili direktive 1999 5 ES Eesti K esolevaga kinnitab Philips Innovative Applications N V seadme Teler vastavust direktiivi 1999 5 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele Latviski Ar o Philips Innovative Applications N V deklar ka Televizors atbilst Direkt vas 1999 5 EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem Lietuvi iuo Philips Innovative Applications N V deklaruoja kad is Televi zorius atitinka esminius reikalavimus ir kitas 1999 5 EB Direktyvos nuostatas Malti Hawnhekk Philips Innovative Applications N V jiddik
18. on the Net TV home page and press OK You can add a online TV broadcaster app on your home page from the app gallery Start a programme Select a programme from the online TV app page and press OK Most often you can use the Play or MM Pause keys on your remote control Smart IV Net IV 29 3 2 Interactive TV What is iTV With interactive TV some digital broadcasters combine their normal TV programme with information or entertainment pages On some pages you can respond to a programme or vote do online shopping or pay for a video on demand programme HbbTV MHEG MHP DTVi Broadcasters use various interactive TV systems HbbTV Hybrid Broadcast Broadband TV or iTV Interactive TV MHEG Interactive TV is sometimes referred to as Digital Text or Red button But each system is distinct Visit the broadcasters Internet website for more information What you need Interactive TV is only available on digital TV channels To enjoy the full benefits of Interactive TV you need a high speed broadband Internet connection to the TV Read more about connecting to the network in Help gt Setup gt Network Open iTV pages Most channels that offer HbbTV or IT V invite you to press the red key or OK key to open their interactive programme Close iTV pages Most IT V pages inform you which key to use to close For Digital Text and Red button press Back To force an iTV page to close switch to the ne
19. record programmes you need a USB 2 0 compatible Hard Drive with 250GB and a high speed broadband Internet connection to the TV Read more about connecting to the network in Help gt Setup gt Network USB Hard Drive installation Before you can pause or record a broadcast you must format the connected USB Hard Drive 1 Connect the USB Hard Drive to one of the two USB ports on the side of the TV Do not connect another USB device to the other USB port when formatting 2 Switch on the device and the TV 3 When the TV is tuned to a digital TV channel press IM Pause to start formatting Formatting will remove all data from the connected USB Hard Drive Follow the instructions on screen When the USB Hard Drive is formatted leave the device connected permanently Smart TV Pause TV and recording Warning The USB Hard Drive is formatted exclusively for this TV you cannot use the stored recordings on another TV or PC Do not copy or change recording files on the USB Hard Drive with any PC application This will corrupt your recordings When you format another USB Hard Drive the content on the former will be lost Pause TV While watching a TV broadcast from a digital channel you can pause the broadcast and continue watching later on Answer a phone call or take a break Meanwhile the broadcast is stored on the USB Hard Drive You can pause a broadcast for a maximum time span of 90 minutes To pause a IV broadcast press
20. rename this TV To rename this TV in the network press ft gt Setup gt Network settings and select TV network name To enter the name press OK to open the on screen keyboard or use the remote control keypad To use Wi Fi MediaConnect on your PC read Help gt Smart TV gt Videos photos and music gt Wi Fi MediaConnect PC requirements Windows XP Vista Windows 7 PC only Minimum PC requirements Intel Pentium Core 2 Duo 1 8GHz e 512MB RAM e 200MB free hard disk space e Wi Fi 802 11g e Broadband Internet connection Recommended PC requirements Intel Pentium Core 2 Duo 2 1GHz e 1GB RAM e 200MB free hard disk space e Wi Fi 802 11n for router and PC Broadband Internet connection Wired installation Connect the router to the TV and switch on your router before you start the network installation To start the network installation press f amp select Setup gt Connect to network and press OK Follow the instructions on screen The TV constantly searches for a network connection The router must be set to DHCP server on If asked for agree to the End User License Agreement Read more about how to connect in Help gt Connections gt Network gt Wired Network settings To open the Network settings press ft gt Setup gt Network settings and press OK Setup Network You can view the network type IP and MAC address the signal strength speed and encryption method etc You can s
21. the 3D glasses for any purpose other than watching 3D TV CHOKING HAZARD Do not let children under 6 years of age play with the 3D glasses they could choke on the battery lid or battery if present Cleaning and care 23 Do not expose the 3D glasses to direct sunlight heat fire or water This may result in a product malfunction or fire Use a clean soft cloth microfibre or cotton flannel to clean the lenses to avoid scratching them Never spray cleaner directly onto the 3D glasses This may damage the electronics Do not drop bend or apply force to the lenses of the 3D glasses Do not use cleaning chemicals containing alcohol solvent surfactant or wax benzene thinner mosquito repellent or lubricant Using these chemicals can cause discoloration or cracks 24 Basics 3D 2 5 Connected devices Select a device Select from the Home menu To select and watch a connected device or activity press f to open the Home menu and select the device or its activity and press OK Make sure the device is switched on Add a connected device to the Home menu for easy selection Read more about Add your devices in Help gt Basics gt Menus gt Home menu Select from the list of connections To open the list of connections press J SOURCE Select the TV connection and press OK to switch to the device on that connection Make sure the device is switched on p Operate devices The remote contr
22. the TV select Start and press OK An identification file is written on the USB memory device 3 Download the TV software Insert the USB memory into your PC On the USB memory device locate the file update htm and double click it Click on Send ID If new software is available download the zip file After the download unzip the file and copy the file autorun upg onto the USB memory device Do not place this file in a folder 4 Update the TV software Insert the USB memory into the TV again The update starts automatically The TV switches itself off for 10 seconds and then back on again Please wait Do not use the remote control remove the USB memory device from the TV If a power cut occurs during the update never remove the USB memory device from the TV When the power returns the update will continue At the end of the update the message Operation succesful appears on screen Remove the USB memory device and press 5 on the remote control 48 Do not e press D twice use the D switch on the TV The IV switches itself off for 10 seconds and then back on again Please wait The TV software has been updated You can use the TV again To prevent an accidental update of the TV software delete the autorun upg file from the USB memory device Setup Software 5 Connections 5 1 First connections Power cable Insert the power cable into the power socket of the TV When disconnecting the po
23. volume level 13 Mute amp To mute the sound or to restore it 125 14 Red colour key To open interactive TV or to select a Text page 15 Green colour key To open the Eco settings or to select a Text page 16 Yellow colour key To select a Text page 17 Blue colour key To select a Text page 18 19 o 20 uas 18 Number keys and text keypad To select a TV channel directly or to enter text 19 Format Subtitles To open or close the Format menu Keep this key pressed for 3 seconds to show or hide subtitles 20 Text Info To open or close text Keep this key pressed for 3 seconds to open or close information on next programmes Operate devices The remote control of the TV can also operate a connected device The device must have EasyLink HDMI CEC and have it switched on The device must also be connected with an HDMI cable Operate an EasyLink device To operate such a device with the TV remote control select the device or its activity in the ft Home menu and press OK The commands of all keys except the ft key the Hf ADJUST key and the OPTIONS key are forwarded to the device Switch back to TV To switch the remote control back to operate the TV press Home and select Watch TV and press OK Show device keys When operating a device some of the keys might not be avalable on the TV remote control To make these keys selectable on TV press OPTIONS and select Show device
24. you want it You can only reorder the sequence of the added devices and activities 3 Press OK to confirm the position All devices and activities shift to the right You can highlight another device or activity and reposition it To stop Reorder press OPTIONS and select Exit reorder Restore device activities To recall a deleted activity from a device with several activities select the device or one of its activities and press z OPTIONS Select Restore device activities and press OK All deleted activities of this device appear again Q FIND With Q FIND you open the Channel list while you are watching TV channels or you open the list of pictures music and videos while browsing your PC or connected USB device Press Q FIND to open the list To close the list press Q again Ht ADJUST With the ADJUST menu you can adjust picture sound Ambilight and 3D settings quickly Press ttf ADJUST to open the Adjust menu Select your choice with the navigation keys and press OK To dose the menu press fH ADJUST again S ENT Basics Menus In the Adjust menu you can adjust these settings Two player gaming e Ambilight On or Off Ambilight dynamics Picture format e Smart picture presets e Smart sound presets Speakers Surround Picture shift e 3D 3D depth Ambilight Read more about the Ambilight settings in Help gt Setup gt Ambilight Picture format Read more about the Picture format settings
25. 496 10 Digital audio playback ISO IEC 13818 3 e See selected countries on the TV type plate 78 Specifications Power and reception 7 4 Display and sound Display Picture Diagonal size 5DoPEE29256 i TT 6m 9 e 3D Max Picture enhancement Perfect Pixel HD Engine Wide Colour Gamut Scanning backlight Display type LED Pro Full HD LED backlight Panel resolution 2560 x 1080p Colour processing 2250 trillion colours 17bit RGB Brightness 500 cd m2 Dynamic contrast 10 000 000 1 e Response time typical 0 5 BEW equiv ms Sound e Output power RMS 40W 33076 T HD Dolby Digital Dolby Digital Plus Dolby Pulse Dolby and the double D symbol are registered trademarks of Dolby Laboratories Specifications Display and sound Pie 7 5 Display resolutions Video formats Resolution Refresh rate e 480i 60 Hz e 480p 60 Hz e 576i 50 Hz 5 6p 50 Hz 720p 50 Hz 60 Hz 10801 50 Hz 60 Hz 1080p 24 Hz 25 Hz 30 Hz 1080p 50 Hz 60 Hz Computer formats Resolutions amongst others e 640 x 480p 60 Hz e 800 x 600p 60 Hz 1024 x 768p 60 Hz 1280 x 768p 60 Hz 1360 x 765p 60 Hz 1360 x 768p 60 Hz 1280 x 1024p 60 Hz 1920 x 10801 60 Hz 1920 x 1080p 60 Hz 80 Specifications Display resolutions 7 6 Multimedia Connections e USB 20 e Ethernet LAN RJ 45 e Wi Fi 802 11b g n built in Supported US
26. All and press OK To open the on screen keyboard select a text entry field and press OK To switch to the app gallery of another country select the country field and press OK Lock or remove an app To lock or remove an app select the app and press OPTIONS Select the option and press OK 28 Reload an app or page To retry loading an app or an Internet page press OPTIONS and select Reload page Security info To view the level of security of the page you re on press OPTIONS and select Security info Internet websites To browse Internet websites select the Internet app on the Net TV home page and press OK To open the on screen keyboard select a text entry field and press OK To remove a visited website from the list press z OPTIONS and select Remove from History Rent a movie With the video store apps in Net TV you can rent your favourite movie from an online rental video store You can pay securely with your credit card 1 Open a video store app 2 Select a video 3 Make the online payment 4 Download the video 5 Start watching What you need To rent and download a video you need a high speed broadband Internet connection to the TV You also need an SD memory card Read more about connecting to the network in Help gt Setup gt Network Video memory To download a video you must format an SD memory card as video memory Insert the SD card into the SD card slot on the side of
27. B file systems FAT 16 FAT 32 NTFS Playback formats Containers MPEG Program Stream MPEG Transport Stream AVI MPEG 4 Matroska Windows Media ASF Video Codecs MPEG 1 MPEG 2 MPEG 4 Part 2 MPEG 4 ANC H264 WMV9 Audio Codecs MP3 AAC HE AAC V1 HE AAC V2 WMA AC3 Image Codecs JPEG Limitations WMA V2 up to V9 2 MPEG 4 AVC up to level 4 0 Supported DLNA media server software DMS e Windows Media Player 11 for Microsoft Windows XP Vista or Windows 7 e TVersity 1 9 3 pro for Windows XP Twonky Media PacketVideo 4 4 9 for PC and Intel MacOX Nero 9 Nero MediaHome for Microsoft Windows XP e Sony Vaio Media Server for Microsoft Windows XP or Vista Sony PS3 media server for Windows XP Google Media Server Google desktop for Windows XP DIXiM for Windows XP Macrovision Network Media Server for Windows XP Philips NAS SPD8020 v 1 29 47 Fuppes for Linux uShare for Linux Supported DLNA mobile devices DMS DMC Nokia N78 N80 N81 N82 N92 N93 N93i N95 N96 N800 N810 e Samsung SGH 1 80 ESD regulations This apparatus meets performance criteria A for ESD In case the apparatus does not recover in DLNA mode due to electrostatic discharge user interference is required Specifications Multimedia 81 7 Connectivity TV Rear e EXT1 SCART adapter included Audio L R CVBS in RGB EXT2 YPbPr Y Pb Pr Audio L R VGA D sub 15 Audi
28. Custom colour is a fixed non dynamic colour setting Separation To set the difference in colour level between the lights on each side of the TV select Separation Separation Off gives a dynamic but uniform Ambilight colour TV switch off To set Ambilight to fade out and switch off a few seconds after you have switched off the TV select TV switch off Allow Ambilight to fade out and switch off completely before you switch the TV back on again Lounge light mood Read more about Lounge light mood in Help gt Setup gt Ambilight gt Lounge light mood Scenea lounge light To always switch off Ambilight when Scenea Is switched on select Scenea lounge light and select Off Wall colour The colour of the wall behind your TV can influence the colour effect of Ambilight To correct this influence select Wall colour and select a colour that matches the wall colour Ambilight will correct its colours to mix best with the colour of the wall behind the TV Lounge light When the TV is on standby you can switch Ambilight on and create a Lounge light effect in your room To switch Ambilight on while the TV is on standby press Ambilight on the TV AMBILIGHT To change the Lounge light colour scheme press Ambilight on the TV again To switch off Lounge light press and hold Ambilight on the TV for 3 seconds Setup Ambilight You can also set up the colour scheme in the Setup menu With the TV switched on press f and sel
29. Drive to your TV Only in selected countries Net TV specifics The availability of Net TV apps varies per country With Net TV you can view any Internet website you like but most of them are not tailored for a TV screen and some plug ins e g to view pages or videos are not available on your TV Net TV apps can be added changed or stopped Net TV shows one page at a time and full screen You cannot download and save files or install plug ins Net TV forum website Find out more on Net TV apps at the Net TV forum website www supportforum philips com Koninklijke Philips Electronics IN V bears no responsibility regarding the content and the quality of the content provided by the content service providers What you need To enjoy Net TV you must connect the TV to a router with a high speed broadband connection the Internet You can use a home network connected to the Internet You do not need a computer Read more about connecting to your home network in Help gt Setup gt Network Smart TV Net TV SN Cr Keyboard and mouse To enter text or to navigate a page you can connect a USB keyboard and a USB mouse to the TV The USB mouse can only navigate pages on the Internet it cannot navigate Net TV app pages Read more about connecting a keyboard or mouse in Help gt Connections gt Connect more devices gt Keyboard and mouse Configure The first time you open Net TV you must agree to the ter
30. I cable transfers picture and sound signals in only one direction except for the HDMI ARC Do not use an HDMI cable longer than 5 m HDMI HDMI OOS 1 ARC EasyLink HDMI CEC If your devices are connected with HDMI and have EasyLink you can operate them with the TV remote control Read more about EasyLink in Help gt Basics gt Remote control gt Operate devices HDMI ARC connection Connect a Home Theatre System to the HDMI ARC connection With HDMI ARC the extra audio cable from the TV to the HTS Is not necessary With one HDMI cable connected to HDMI ARC Audio Return Channel both cables are combined Switch off HDMI ARC In case you would like to switch off the audio return signal on the HDMI ARC connection press ft gt Setup gt TV settings gt EasyLink gt HDMI 1 ARC select Off and press OK 50 DVI to HDMI Use a DVI to HDMI adapter if your device only has a DVI connection Use one of the HDMI connections and add an Audio L R cable mini jack 3 5 mm to Audio In DVI VGA for sound on the back of the TV Copy protection DVI and HDMI cables support HDCP High bandwidth Digital Contents Protection HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu ray Disc Also referred to as DRM Digital Rights Management Y Pb Pr Use the Component Video YPbPr connection together with an Audio Left and Right connection for sound Match the YPbPr connector colours with t
31. IM Pause A progress bar appears briefly on screen To call up the progress bar press IM Pause again To continue watching press Play To switch to TV broadcast again press W Stop B tr or 44 b b Once you switch to a digital channel the USB Hard Drive starts storing the broadcast When you switch to another channel the new channel broadcast is stored and the broadcast of the former channel is cleared Also when you switch the TV to standby the stored broadcast is cleared When you start watching a programme of another device a connected Blu ray Disc player or digital receiver the USB Hard Drive clears all broadcast storage Whilst recording a programme on the USB Hard Drive you cannot pause a V broadcast Instant replay Whilst watching a TV broadcast from a digital channel you can easily instant replay the broadcast To replay the last 10 seconds of a TV broadcast press IM Pause and press Left You can press 4 repeatedly until you reach the start of the broadcast storage or the maximum time span Progress bar With the progress bar on screen press 44 Rewind or press gt gt Forward to select from where you want to start viewing the stored broadcast Press these keys repeatedly to change their speed 33 Specifics The Audio Description audio commentary for the visually impaired is not available for playback in Smart USB Recording Recording If the TV is connected to th
32. Register your product and get support at Cinema 21 9 Platinum series Smari LEL TV www philips com welcome o0rFTL2TS8 User manua PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Philips cannot be held responsible either for any errors in the content of this document or for any problems as a result of the content in this document Errors reported to Philips will be corrected and published on the Philips support website as soon as possible Terms of warranty Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the T V and accessories only as intended by the manufacturer The caution sign on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support fo
33. Smart picture setting to Game before you start playing To switch the Smart picture setting to Game press tH ADJUST and select Smart picture gt Game and press OK The TV is ready for gaming Do not forget to switch back to your normal Smart picture setting when you stop gaming Read more about how to connect a game console in Help gt Connections gt Connect more devices gt Game or HD Game Two player games Some games offer multi player and split screen gaming On this TV you can set the split screen as two full screen views Two players watch the same TV but see two different screens to play the game The TV uses 3D technology to do this To watch each screen you need a pair of 3D glasses for each player Smart IV Games What you need With this TV use the active 3D glasses Philips PTA516 sold separately For two player split screen gaming the game console must be connected with HDMI Start a two player game 1 Select the game console in the Home menu and press OK 2 On the game console start the game and select the multi or two player mode Select the mode for split screen viewing 3 On the TV press ADJUST and select Two player game 4 Select the format in which the split screen game is shown on screen Side by side or Top bottom and press OK The TV shows the 2 screens as full screens To watch the 2 different screens put on the 3D glasses To switch the glasses to watch the Player 1 screen or Pla
34. TIONS and select Exit reorder Rename You can rename a channel in the Channel list 1 In the channel list highlight the channel you want to rename 2 Press OPTIONS and select Rename to start renaming You can enter text directly with the remote control keypad or open a full keyboard on top of the text entry menu IAIIBIECI DITEILFI G IIHILT J CK CE CM N LO LP Fa CR _ Space gt Done EN e ABC DEF 3 S JKL MNO amp Enter text with the remote control keypad Use the navigation keys to position the cursor in the text Press D Back to delete a character Use the remote control keypad as you do for SMS text messaging to enter a character Use the 1 key to select a special character Select Clear to delete a character Select Done to end Rename Enter text with the on screen keyboard To open the on screen keyboard on top of the text entry menu press OK when the cursor in the text flashes On the keyboard use the navigation keys to highlight a character and press OK to enter it To delete a character press Back or highlight I and press OK To switch from uppercase to lowercase or to a set of special characters press gt I Next or I Previous To edit a character within a line of text position the cursor on this character and use the and keys at both ends of the on screen spacebar To close the on screen keyboard highlight Done and press OK USB keyboard You can use a co
35. TVi pages You can use the navigation and colour keys the number keys and the Back key to navigate the DTVi pages You can use the keypad on the remote control as you do for SMS text messaging to enter text To open the on screen keyboard select the text entry field and press OK Closed Captioning D TVi applications cannot load when Closed Captioning is on To switch off Closed Captioning while watching a TV channel press OPTIONS select Closed Captioning and select Off Smart TV Interactive TV 3 3 Videos photos and music Browse USB You can view photos or play your music and videos from a USB memory device Insert a USB device into the USB connection on the left hand side of the TV while the TV is switched on The TV detects the device and opens a list showing its content If the list does not appear automatically press fft select Browse USB and press OK USB To close Browse USB press f and select another activity or disconnect the USB device View photos To view photos select a photo in the list and press OK If there are more photos in the folder the TV starts a slideshow with these photos To stop press OPTIONS and select Stop To pause or play the slideshow again press OK To view the next photo press Pl To view the previous photo press I lt Options for photos Press OPTIONS to select the following e Show info e Stop Play once Repeat Rotate e Shuffle on o
36. Universal access does not appear in the Options menu switch on Universal access in the Setup Read Help gt Setup gt Universal access gt Switch on 47 4 7 Software Current version To view the current TV software version press f gt Setup gt Software settings and press OK Select Current software info and read Version Update from Internet If the TV is connected to the Internet you may receive a message from Philips to update the TV software You need a high speed broadband Internet connection If you receive this message we recommend you carry out the update Select Update Follow the instructions on screen You can also look for new updates yourself To look for an update press ft gt Setup gt Update software and press OK Follow the instructions on screen When the update is complete the TV switches off and back on again automatically Wait for the TV to switch itself back on Do not use the Power switch D on the TV Update with USB It might be necessary to update the TV software You need a PC with an high speed Internet connection and a USB memory device to upload the software on the TV Use a USB memory device with 256MB free space Make sure that write protection is switched off 1 Start 2 Identify 3 Download 4 Update IV 1 Start the update on TV To start the software update press ft gt Setup gt Update software Select USB 2 Identify the TV Insert the USB memory into the side of
37. V then switch off the automatic switch off This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV To switch off the automatic switch off press the green key while you are watching V channels and select Auto switch off and select Off Use 2 antenna cables to connect the antenna to the device and the IV Digital TV receiver mum pnr E g v Out OO ee oec Digital TV receiver c O 0O e e o 0 C3 Connections Connect devices 55 Dig receiver Disc Recorder If you use a digital receiver to watch TV a set top box STB and you do not use the remote control of the TV then switch off the automatic switch off This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV To switch off the automatic switch off press the green key while you are watching ITV channels and select Auto switch off and select Off First use 3 antenna cables to connect the devices to the TV Antenna Digital TV receiver Recorder g uw eru hot seg 00 9 UU 1 Out we M Then use an HDMI cable to connect the digital receiver to the Digital TV receiver Recorder ms Finally use an HDMI cable to connect the Disc Recorder to the TV 56 Connections Connect devices Digital TV receiver Recorder Dig receiver Disc R Home T
38. activities The device must be connected with an HDMI cable If your connected device does not appear in the Home menu on the device EasyLink may be switched off If your connected device does not have EasyLink or is not connected with an HDMI cable you need to manually add your device with Add your devices in the Home menu Add your devices In the Home menu select Add your devices and press OK Follow the instructions on screen The TV asks you to select the device and the connection to which the device is connected The device or tts activities are now added to the Home menu Rename a device To rename a device in the Home menu select the device and press OPTIONS and select Rename Use the keypad on the remote control as you do for SMS text messaging to enter the new name or press OK to open the on screen keyboard Delete a device To delete a device or activity from the Home menu select the item and press OPTIONS and then select Remove this device If the device or activity keeps appearing in the Home menu after you deleted it switch off the EasyLink setting on the device to prevent the icon from being automatically added again Audio to Video sync 46 With a Home Theatre System HTS connected to the TV the picture on TV and the sound from the HTS should be synchronised A mismatch can be visible in scenes with people talking When they finish sentences before their lips stop moving Automatic audio to vid
39. an look up all installed TV and radio channels While watching TV press Q FIND to open the Channel list Press Q FIND again or D Back to close the Channel list without changing the channel In the Channel list you can navigate to a TV channel or radio station and press OK to watch the TV channel or listen to the radio station The Channel list can have several pages To view the next or previous Channel list page press Pl or I Channel list options With the Channel list on screen press OPTIONS to select the following options e Select list e Mark as favourite Reorder Rename e Hide channel e Unhide all Select list Use this option to select which channels are shown in the Channel list The list you select here determines which channels you flick through with CH and CH Mark as favourite When a channel is highlighted in the Channel list you can set it as a favourite channel Read Basics gt Watch TV gt Favourite channels Reorder You can reposition channels within the list 1 Press OPTIONS and select Reorder to start reordering channels 2 Highlight a channel and press OK 3 Reposition the channel where you want it with the navigation keys Alternatively enter the new position directly with the number keys Basics Watch TV 4 Press OK to confirm the position You can insert the channel or swap it You can highlight another channel and do the same To stop Reorder press OP
40. and select Picture shift Use the navigation keys to adjust the picture position Press OK to stop Picture shift e If distorted screen edges are visible press ft gt Setup gt TV settings gt Picture gt Screen edges and use the slider bar to enlarge the picture slightly There is a picture but no sound Check the volume is not set to 0 Check the sound has not been muted with K Check that all cables are connected properly e If no sound signal is detected the TV automatically switches off sound This is proper operation and is not a malfunction The sound is poor e Try any Smart sound setting press OPTIONS Smart sound Check that the sound is set to Stereo The sound comes from one speaker only Check the Balance setting Press ft gt Setup gt TV settings gt Sound gt Balance Use the slider bar to set the balance Sound delay e If there is an audio to video sync mismatch when sound comes from a Home Theatre System an audio sync delay needs to be set up Read more about Audio to Video sync in Help gt Setup gt Devices gt Audio to Video sync Troubleshooting Picture and sound 71 6 5 Devices HDMI connections The HDMI HDCP procedure might take a few seconds before the picture from a device appears e If the TV does not recognise the device and there is no picture try switching from one device to another and back again to restart the HDCP procedure Or switch the device off and bac
41. another audio language from the list Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired Read Help gt Setup gt Universal access 26 Child locks To prevent children from watching a channel or a programme you can lock channels or lock age rated programmes Parental rating Some digital broadcasters have rated their programmes When the rating is equal or higher than the rating you have set for your child s age the programme will be locked To watch a locked programme you must enter the child lock code The parental age rating is set for all channels Set an age rating Press ft and select Setup gt Channel settings and select Child lock gt Parental rating To select an age rating you must first enter your 4 digit child lock code If no child lock code is set you can set the code now When the code is entered you can select the age rating When the rating of a programme is equal or higher than the rating you have set for your child s age the programme will be locked The TV will ask for the code to unlock the programme For some operators the TV only locks programmes with a higher rating Lock a channel To lock a channel press f and select Setup gt Channel settings and select Child lock gt Channel lock In the list of channel numbers select a channel and press OK to lock a channel In the list a locked channel is marked with an X Now y
42. channels press ft gt Setup gt Search for channels gt Reinstall channels and press OK Select DVB T or DVB C The channel search can take a few minutes Follow the instructions on screen Full installation To redo a full TV installation press ft gt Setup gt TV settings gt Reinstall TV and press OK The installation can take a few minutes Follow the instructions on screen You can reorder and rename channels in the Channel list Channel list copy Channel list copy is intended for dealers and expert users With Channel list copy vou can copy the channels installed on one TV onto another Philips TV of the same range With Channel list copy you avoid the time consuming channel search and you can offer a predefined channel list setup The small file you copy fits every USB memory device Conditions e Both TVs are from the same year range Both TVs have the same product type suffix for DVB H K M T or D OO in their type number and have the TV installed for the same country d Both TVs have the same hardware type Check the hardware type on the TV type plate on the back of the TV Typically noted as Qs LA Both TVs have compatible software versions When you upload an on screen message will warn you if software versions are not compatible Copy a Channel list 1 Switch on the TV which has its channels installed Plug in a USB memory device 2 Press ff gt Setup gt TV settings gt Preferences gt Cha
43. ct the CAM provider and press OK CI This TV can handle the Cl conditional access Cl allows service providers to offer premium HD digital programmes like movies and sports with a high level of copy protection To insert a CI CAM read chapter CAM Conditional Access Module Connections Common interface CAM 6 6 Troubleshooting 6 1 Contact information If the advice and suggestions in Troubleshooting do not help resolve the problem try switching the TV off and back on again Warning If your TV breaks down NEVER try to repair the TV yourself Consumer Care If the TV problem is not solved you can call the Philips Consumer Care hotline in your country Look up the TV model and serial number before you call Find the telephone number on the documentation that came with the TV Or consult our website www philips com support TV model number and serial number Find these numbers on the packaging label or on the type label on the back or bottom of the TV 68 Troubleshooting Contact information 6 2 TV and remote control The TV does not switch on e Switch the TV off and on again with the switch on the bottom of the TV Check the power cable connection Try using the keys on the TV to switch on The TV does not switch on from standby Check that the batteries of the remote control are not empty or weak Check their orientation Try using the keys on the TV to switch on The TV does
44. d Ambilight settings automatically to the lighting conditions of the room Picture format Read Help gt Basics gt Watch TV gt Picture format 38 Screen edges Slightly enlarge the picture to hide distorted edges Picture shift Move the picture up down or left right with the cursor keys Sound In the Sound menu you can adjust all sound settings individually To open Sound settings press ft gt Setup gt TV settings gt Sound e Bass Sets the level of low tones in the sound Treble Sets the level of high tones in the sound e Surround Sets the surround sound effect from internal speakers Headphones volume Sets the volume for the headphone connection of the TV Auto volume levelling Reduces sudden volume differences like at the beginning of adverts or when switching from one channel to another Balance Sets the balance of the left and right speakers to best fit your listening position Eco settings Eco settings bundle the TV settings that help the environment While you are watching TV channels press the Green key to open Eco settings Active settings are marked with a Z Press again to close Energy saving This Smart picture setting sets the picture together with Ambilight in the most ideal energy conscious setting To switch on select Energy saving in Eco settings and press OK To switch off Energy saving select another Smart picture setting Screen off If you only lis
45. d much more Once the network is installed you can enjoy the best of the Internet for your TV Interactive TV With the TV connected to the Internet you can enjoy the full benefits of Interactive TV Systems such as HbbTV MHP etc use the Internet to communicate with the TV Wi Fi MediaConnect With Wi Fi MediaConnect you can bring up project your PC screen on the TV screen wirelessly You start Wi Fi MediaConnect from your PC What you need To connect the TV to a home network and the Internet you need a router in your home network The router must be set to DHCP server on Use a router with a high speed broadband connection to the Internet You can connect the TV wirelessly or wired SN Cr If you use a wired connection to the router you need a network Ethernet cable The TV uses a DLNA certified protocol You can use a computer with Microsoft Windows XP Vista or Windows Intel Mac OSX or Linux as the operating system 44 Find your PC files To select your PC files on screen you need recent media server software on your computer like Windows Media Player 11 or similar To find your files on the TV some media server software must be set up to share the PC files with the TV Find the list of supported media server software in Help gt Specifications gt Multimedia Wireless installation Switch on your router before you start the network installation To start the wireless network installation press
46. d on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover Copyright Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries All other registered and unregistered trademarks are the property of their respective owners SDHC Logo is a trademark of SD 3C LLC Contents 1 Getting started 4 1 1 TV tour 4 NP Setting up 8 1 3 Keys on the TV 10 1 4 Register your TV 11 1 5 Help and support 12 2 Basics 13 2 1 Remote control 13 22 Menus 16 2 3 Watch IV 18 24 3D 223 2 5 Connected devices 25 2 6 Subtitles timers and locks 26 3 Smart TV 27 21 Net IV 27 9 2 Interactive TV 30 3 3 Videos photos and music 31 34 Pause TV and recording 33 3 5 Games 35 3 6 Text 36 4 Setup 38 4 7 Picture and sound 38 42 Ambilight 40 4 3 Channels 42 44 Netw
47. e Internet and there is a Recordings button on the Programme guide page you can record a digital TV broadcast on the USB Hard Drive You can manage all recordings in the Programme guide on TV If the Recordings button is not available check if the Programme guide data is set to update from the network Press A Home and select Setup gt TV settings gt Preferences gt Programme guide gt From network Record now To record the programme you are watching press Record While the recording has already started you can adjust the end time of the recording in the pop up window of the Programme guide Press Schedule to confirm the end time To stop recording immediately press Wi Schedule a recording You can schedule a recording of an upcoming programme for today or a few days from today maximum of 8 days away 1 To schedule a recording press Home and select Programme guide On the Programme guide page select the channel and programme you wish to record You can enter the channel number to jump to the channel in the list Press gt Right or Left to scroll the programmes of a channel To change the date of the list select the date at the top of the page and press OK Select the day you want and press OK again 2 With the programme highlighted press OPTIONS and select Record The TV adds some time buffer at the end of the program You can add some extra buffer if needed 3 Select Schedule and press OK T
48. e transfer rate The files on my PC are not shown To look for files on your home network with Browse PC your PC media server software should be set up to share the filles with the TV See the list of compatible Media server software in Help gt Specifications gt Multimedia Troubleshooting Videos photos and music 53 6 Network Wireless network not found or distorted Microwave ovens Dect phones or other WiFi 11b devices in your neighbourhood might disturb the wireless network Make sure that the firewalls in your network allow access to the TV wireless connection e If the wireless network does not work properly in your home try the wired network installation Read Help gt Setup gt Network gt Wired installation Net TV does not work e f the connection to the router is OK check the router connection to the Internet Browse PC or Net TV work slow Look in your wireless router s user manual for information on indoor range transfer rate and other factors of signal quality You need a high speed broadband Internet connection for your router 74 Troubleshooting Network 7 Specifications 7 1 Software Software version To view the current TV software version press f gt Setup gt Software settings and press OK Select Current software info and read Version Open source software This television contains open source software Philips hereby offers to deliver upon request a cop
49. ect Setup Select TV settings gt Ambilight gt Lounge light mood Select the colour scheme with which Lounge light will start up Setup Ambilight 41 4 3 Channels Reorder and rename You can reorder and rename channels in the Channel list To reorder or rename a channel read Help gt Basics gt Watch TV 7 Channel list Update channels The TV puts all installed channels in the Channel list If you receive digital channels you can set the TV to automatically update the list with new channels You can also start an update of the Channel list yourself Automatic channel update Once a day at 6 AM the TV updates the channels and stores new channels Empty channels are removed For new or removed channels a message is shown at TV start up The TV must be in standby to automatically update channels To switch off the message at start up press ft gt Setup gt Channel settings and press OK Select Channel installation gt Channel update message and select Off To switch off the automatic channel update press ft gt Setup gt Channel settings and press OK Select Channel installation gt Automatic channel update and select Off Start an update To start an update yourself press ft gt Setup gt Search for channels and press OK Select Update channels and press OK Press Start The update can take a few minutes Follow the instructions on screen Reinstall channels Reinstall channels To reinstall only the
50. eo sync With recent Philips Home Theatre Systems the audio to video sync is automatically synchronised and always correct Audio sync delay Other Home Theatre Systems might need to adjust the audio sync delay to synchronise the audio to video On the HTS increase the delay value until there is a match between picture and sound A delay value of 180ms may be required Read the user manual of the HTS With a delay value set up on the HTS you need to switch off Audio Out delay on the TV if the HTS sets an identical delay for all its incoming audio To switch off Audio Out delay press A and select Setup gt TV settings gt Preferences gt Audio Out delay Select Off and press OK If you cannot set up a delay on the HTS or its maximum setting is insufficient you can switch off the Perfect Natural Motion picture processing of the TV To switch off Perfect Natural Motion press f and select TV settings gt Picture gt Perfect Natural Motion Select Off and press OK Auto subtitle shift If you play a DVD or Blu ray Disc on a recent Philips player the TV can move the subtitles upwards Subtitles will then be visible whatever Picture format you select The TV comes with Auto subtitle shift switched on To switch off Auto subtitle shift press f gt Setup gt TV settings gt EasyLink gt Auto subtitle shift Select Off Pixel Plus link Some other devices DVD or Blu ray Disc players might have their own picture quality process
51. er 50 E EasyLink remote control 46 Eco settings 38 Encryption method 44 ESD 81 Expired recording 34 F Failed recording 34 Find 16 G Game console 35 Gamma 38 H HbbIV 30 HbbTV block 30 HbbTV pages 30 HD IV 7 Index HD video clip 7 HDMI ARC 50 HDMI connection 50 Headphone volume 38 Help Search 12 Home menu 16 Infrared sensor 14 Internet 44 ISF Calibration picture 39 K Keyboard on screen 19 L Lock code 26 M Media server software 81 Music with photos 31 N Net IV 27 Net TV connection 2 7 Net TV open 28 Network wired connection 65 Network wired installation 45 Network wireless installation 44 O One Touch Play 14 Online rental video 28 Open source software 75 Options menu 17 P Parental rating 26 Pause IV 33 Pause TV installation 33 PC browse 31 PC connect 31 PC monitor 63 Perfect Pixel HD Engine 38 Photos 31 Photos slideshow 31 Picture settings 38 Picture shit 17 Play videos 31 Power consumption 77 7 Product recycling 7 R Radio channels 18 Reception quality 43 Recording installation 33 Recording watch a 34 Rental video 28 Router 44 S Screen edges 38 SD card install 66 Select list 18 Smart setting sound 20 Smart settings reset 39 Software current version 48 Software Internet update 48 Software USB update 48 Sound settings 38 Subtitle auto shift 46 Subtitles language 26 Subtitles On during mute 26 Surround mode
52. er DLNA certified devices What you need To browse your PC files you need to connect the TV to your home network Also do not forget to set your media server software to share the files with the TV Browse PC To browse your PC files press f select Browse PC and press OK To close Browse PC press f and select another activity If the network is not yet installed when you select Browse PC the Network installation starts automatically Follow the instructions on screen To select view and play your files read Help gt Smart TV gt Videos photos and music gt Browse USB Find the list of compatible playback formats and compatible media server software in Help gt Specifications gt Multimedia Read more about connecting to a network in Help gt Setup gt Network Scenea With Scenea you can set a photo as a painting on your TV screen Select your favourite photo from your collection To open Scenea press fft select Scenea and press OK If you did not yet select a photo of your own a preset photo is shown To dose the Scenea photo press a key on the remote control 31 Select a photo for Scenea 1 Select a photo from a connected USB device or from a connected PC This photo must be in JPEG format 2 With the photo highlighted in the Browse USB or Browse PC list press OPTIONS select Set as Scenea and press OK By agreeing to overwrite the current photo the new photo is set Scenea lounge light
53. es clear objects away from the 3D transmitter on the TV Watch 3D To start watching a 3D movie or programme insert a 3D movie into a 3D Blu ray Disc player or tune to a TV channel that broadcasts programmes in 3D Press f Home and select the 3D Blu ray Disc player or select Watch TV and tune to the TV channel Start 3D The TV can detect when 3D is available When the 3D message appears select Start 3D and press OK Put on the 3D glasses If the TV cannot detect the 3D signal the 3D signal tag is missing the 3D programme is shown as a double image on screen To switch the double image to 3D press tf ADJUST select 3D and select Side by side or Top bottom according to the double Image positions You might need to select the inverted format if the normal format results in strange 3D effects Stop 3D To stop watching 3D press fff ADJUST and select 2D in the 3D menu You can also stop 3D when you switch to another channel or connected device 2D to 3D conversion You can convert any 2D programme to watch it in 3D To convert a 2D programme to 3D press ttf ADJUST select 3D and select 2D to 3D conversion Basics 3D To stop the 2D to 3D conversion select 2D in the 3D menu or switch to another activity in the Home menu The conversion will not stop if you switch between TV channels 3D depth You can change the depth of 3D for a weaker or stronger 3D effect To set the 3D depth press fff ADJUST and select
54. et DHCP and Auto IP the IP configuration settings DMR and the TV network name 45 45 Devices EasyLink HDMI CEC With EasyLink HDMI CEC your TV and the connected devices can work together You can use the TV remote control to operate EasyLink devices The device needs to be connected with an HDMI cable Devices with EasyLink appear automatically in the Home menu Setup The TV comes with EasyLink switched on Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices EasyLink might not work with devices from other brands Switch off EasyLink RC If you don t want to operate devices with the TV remote control you can switch off EasyLink remote control separately Press Home fft gt Setup gt TV settings and select EasyLink gt EasyLink Remote Control and select Off Switch off EasyLink To switch off EasyLink completely press Home ft gt Setup gt TV settings and select EasyLink gt EasyLink On Off and select Off HDMI CEC on other brands The HDMI CEC functionality has different names on different brands Some examples are Anynet Aquos Link Bravia Theatre Sync Kuro Link Simplink and Viera Link Not all brands are fully compatible with EasyLink Read more about using EasyLink in Help gt Basics gt Remote control gt Operate devices Add a new device Devices connected with EasyLink HDMI CEC automatically show their activity in the Home menu A single device can add several
55. ets the colours to Normal Warm reddish or Cool bluish Select Custom to set up your own personal settings in the Custom menu Custom tint Use the slider bar to set the colour temperature of the picture Perfect Pixel HD Controls the advanced settings of the Perfect Pixel HD Engine Perfect Natural Motion removes motion judder and reproduces smooth movement especially in movies Clear LCD gives a superior motion sharpness better black level high contrast with a flicker free quiet image and a larger viewing angle Super resolution enables superior sharpness especially on lines and contours in the picture Perfect contrast sets the level at which the TV automatically enhances the details in the dark middle and light areas of the picture Dynamic backlight sets the level at which power consumption can be reduced by dimming the brightness intensity of the screen Choose for the best power consumption or for the picture with the best brightness intensity MPEG artefact reduction smooths the digital transitions in the picture Colour enhancement makes the colours more vivid and improves the resolution of details in bright colours Gamma is a non linear setting for picture luminance and contrast Use the slider bar to set a higher or lower gamma value PC mode Sets the TV to the ideal pre defined computer setting if a computer has been connected Light sensor Adjusts the picture an
56. f amp select Setup gt Connect to network and press OK Follow the instructions on screen WPS Wi Fi Protected Setup If your router has WPS Wi Fi Protected Setup go to the router and press the WPS button Return to the TV within 2 minutes select WPS and press OK The TV connects to your network This takes about 2 minutes Finish the installation Most new wireless routers have the WPS system and carry the WPS logo The WPS system uses WPA security encryption and cannot be combined with devices on your network that use the WEP security encryption If you still need this WEP device in your network install with Scan gt Standard Scan for routers If you have several routers in your network you can select the network you need To select a specific network router press Scan on the first page of the installation The routers with WPS and with the strongest signal are shown first in the list Select the router you need and press WPS if the router has WPS Or press Pin code if you can enter the PIN code in your router software to connect Or press Standard to enter the encryption key manually PIN code To make the secured connection with a PIN code select PIN code and press OK Write down the 8 digit PIN code shown and enter it in the router software on your PC See the router manual where to enter the PIN code Standard To enter the encryption key the security key manually select Standard and press OK If you have WPA sec
57. ff e Slideshow speed e Slideshow transition e Set as Scenea Shuffle on Plays the files randomly Set as Scenea Sets the current photo as a wallpaper photo for Scenea Play videos or music To play videos or music select the file in the list and press OK If there are more music or video files in the folder the TV plays the files one after the other To stop press OPTIONS Smart TV Videos photos and music To pause or play press OK To play the next file in the folder press Pl To play to the previous file press I To fast forward press P To rewind press Options for music and videos Press OPTIONS to select the following e Stop Play once Repeat e Shuffle on off Music with photos You can play music and show photos at the same time Start the photo slideshow after you started the music 1 Select a folder with music files and press OK 2 Select a folder with photo files and press OK To stop press OPTIONS and select Stop Screen off If you only listen to music you can mute the TV screen to save energy To mute the screen press the green key select Screen off and press OK To switch the screen back on press any key on the remote control See the list of compatible playback formats in Help gt Specifications gt Multimedia Browse PC You can view photos or play your music and videos from a PC in your home network The TV is DLNA certified and is compatible with oth
58. g in the USB memory device that holds the Channel list of the other TV 3 To start the Channel list upload press ft gt Setup gt TV settings gt Preferences gt Channel list copy gt Copy to TV and press OK You might be asked to enter the TV PIN code of this TV 4 The TV notifies if the Channel list is copied to the TV successfully Unplug the USB memory device DVB T or DVB C If both DVB T and DVB C reception is available in your country and if this TV is ready to receive DVB T and DVB C for your country you will have selected one or the other during the channel installation Setup Channels If you want to change the DVB setting to start a new channel installation press ft gt Setup gt Channel settings and press OK Select Channel installation gt Antenna or Cable DVB and press OK Select the DVB setting you want DVB C channel installation For ease of use all DVB C settings are set to automatic If your DVB C provider gave you specific DVB C values like a symbol rate or a frequency enter these values when the TV asks for them during installation DVB T DVB C You can set up your TV for DVB T and DVB C Install one system followed by the other When both installations are complete the Channel list will show both DVB T and DVB C channels Reception quality If you receive digital channels you can check the quality and signal strength of a channel If you use an antenna you can reposition the antenna to
59. he built in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens Energy saving The energy saving Smart picture setting combines several TV settings that result in saving energy Low standby power The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant Standby functionality Power management The advanced power management of this TV ensures the most efficient use of energy You can check how your personal TV settings the level of brightness in current onscreen pictures and the surrounding light conditions determine the relative power consumption To check the relative power consumption press ft gt Setup and press PI Select Watch demos gt Active control and press OK Select a Smart setting to check the corresponding values End of use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your o
60. he cable plugs when you connect YPbPr can handle High Definition HD TV signals AUDIO L R R L YPbPr a 96 9 Nan SCART A SCART cable combines video and audio signals SCART connectors can handle RGB video signals but cannot handle High Definition HD TV signals Use the included Scart adapter to connect a Scart cable Connections Cables and connections SCART Video If you have a device with only a Video CVBS connection you need to use a Video to SCART adapter not supplied Connect the Video to Scart adapter to the included Scart adapter of the TV You can add the Audio L R connections Audio L R R L OI i mA JE i a i i E t Al i fi lt lt wpe Audio L R es E lt i Yom VGA Use a VGA cable DE15 connector to connect a computer to the TV With this connection you can use the TV as a computer monitor You can add an Audio L R cable for sound mini jack 3 5 mm To connect a computer with the VGA connection read Help gt Connections gt Connect more devices gt TV as PC monitor Connections Cables and connections AUDIO IN DVI VGA AUDIO IN DVI VGA 51 5 3 Connect devices SoundBar Use an HDMI cable to connect the device to the TV If you use the HDMI ARC connections on both TV and device no other cable is needed If not read on HDMI Tu If you do not use the HDMI ARC connecti
61. he programme is scheduled for recording A warming will show automatically when overlapping recordings are scheduled If you plan to record a programme in your absence remember to leave the TV on standby and the USB Hard Drive switched on 34 List of recordings To view the list of recordings and scheduled recordings select Recordings on the Programme guide page and press OK In this list you can select a recording to watch remove recorded programmes check the free drive space or schedule a recording not linked to a specific TV programme Expired recording Broadcasters can limit the number of days a recording can be viewed A recording in the list can show the number of days before it expires Failed recording When a scheduled recording was prevented by the broadcaster or when the download was interrupted a recording is marked as Failed Watch a recording In the list of recordings select the arrow in front of the recording and press OK The playback of the recording starts You can use the Play gt gt Forward Rewind M Pause or m Stop keys on the remote control Set a timed recording To set a recording not linked to a programme select Schedule recording above the list of recordings and press OK Set the channel date and time span To confirm the recording select Schedule and press OK Remove a scheduled recording To remove a scheduled recording select the red circle in front of the recording a
62. heatre If you use a digital receiver to watch TV a set top box STB and you do not use the remote control of the TV then switch off the automatic switch off This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV To switch off the automatic switch off press the green key while you are watching V channels and select Auto switch off and select Off First use 3 antenna cables to connect the devices to the TV Antenna Digital TV receiver Recorder wa oo an 22222082 g In we Out In u Out l _ V Then use an HDMI cable to connect the digital receiver to the Home Theatre System p mw Digital TV receiver Recorder ws Ga ee coc Connections Connect devices Then use an HDMI cable to connect the Disc Recorder to the Home Theatre System p Digital TV receiver Recorder Then use an HDMI cable to connect the Home Theatre System to the TV Home Theatre System HDMI mc Digital TV receiver qu EJ quem o 53 ee If you do not use the HDMI ARC connection on the TV and the device add a digital audio cable optical Digital Audio OPTICAL Home Theatre System EX Digital TV receiver Recorder 3 Q cceooc2 Digital HD receiver If you use a digital receiver to watch TV a set top box STB and you do not use the remote control of the TV then switch off the automatic sw
63. ing To avoid bad picture quality caused by interference with the TV processing the picture processing of these devices should be disabled The TV comes with Pixel Plus link switched on and disables the picture quality processing of recent Philips devices connected to the TV To switch off Pixel Plus link press ft gt Setup gt TV settings gt EasyLink gt Pixel Plus link Select Off Setup Devices 4 6 Universal access Switch on With Universal access switched on the TV is set for use for hearing and visually impaired people Switch on If you did not switch on Universal access during the installation you can still switch it on in Setup To switch on Universal access press ft gt Setup gt TV settings gt Preferences gt Universal access Select On and press OK With Universal access switched on in Setup the Universal access option is added in the Options menu With Universal menu in the Options menu you can set specific settings for hearing and visually impaired people Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for hearing impaired people With Hearing impaired switched on the TV automatically switches to the adapted audio and subtitles if available Switch on To switch on Hearing impaired press OPTIONS select Universal access and press OK Select Hearing impaired select On and press OK To check whether a hearing impaired audio language is available
64. is not connected with an HDMI cable you need to manually add your device to the Home menu with Add your devices Devices with EasyLink HDMI CEC and connected with an HDMI cable automatically show their activity in the Home menu A single device can add several activities If an EasyLink device does not appear automatically EasyLink on the device may be switched off Add a device manually In the Home menu select Add your devices and press OK Follow the instructions on screen The TV asks you to select the device and the connection to which the device is connected The device or its activities are now added to the Home menu Rename a device To rename an added device or activity select the device in the Home menu and press OPTIONS and select Rename Use the keypad on the remote control as you do for SMS text messaging to enter the new name Remove a device To remove a device or activity from the Home menu select it and press z OPTIONS and then select Remove this device If a device or activity keeps appearing in the Home menu after you deleted it switch off the EasyLink setting on the device to prevent the icon from being automatically added again Read more about EasyLink in Help gt Basics gt Remote control gt Operate devices 16 Reorder To reorder a device or an activity in the Home menu select it and press z OPTIONS 1 Select Reorder 2 With the navigation keys reposition the device or activity where
65. itch off This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV 58 Connections Connect devices To switch off the automatic switch off press the green key while you are watching TV channels and select Auto switch off and select Off First use 2 antenna cables to connect the device to the TV Digital HD receiver mum mr a E g Out pigital HD receiver e Connections Connect devices 5 4 Connect more devices Game Connect a game console to the side or back of the TV You can use an HDMI YPbPr or SCART connection If your game console only has Video CVBS and Audio L R output use a Video Audio L R to SCART adapter to connect to the SCART connection Read more about Games in Help gt Smart TV gt Games Use an HDMI cable to connect the device to the side of the TV GA Or use a SCART adapter to connect the device to the TV SCART FEE TE P 21931011 Yerrrrirati Audio L R E J Vox HD Game Use an HDMI cable or YPbPr and Audio L R cables to connect a High Definition game console to the TV To connect a HD Game console read Help gt Connections gt Connect more devices gt Game Photo camera To view photos stored on your digital photo camera you can connect the camera directly to the TV Use the USB connection on the side of the TV to connect Switch on the camera after yo
66. jara li dan Televi sion jikkonforma mal ti ijiet essenzjali u ma provvedimenti o rajn relevanti li hemm fid Dirrettiva 1999 5 EC slenska H r me l sir Philips Innovative Applications N V yfir v ad Televi sion er samr mi vi grunnkr fur og a rar kr fur sem ger ar eru tilskipun 1999 5 EC A copy of the Declaration of Conformity is available at http www philips com support CEO This equipment may be operated in the following European countries at ee 8G CH Cy ez roe ox ee es Fi FR Ge GR HU 1s iT n er eu pv MT Nc GB uU INO PL PT RO SE sK sejr j This equipment can be operated in other non European countries Italia Sistema TV wireless Informationi sulle normative applicabili Per il mercato italiano uso privato Decreto legislativo 259 1 8 2003 Codice delle comu nicazione elettroniche In particulare l articolo 104 specifica i casi in cui occorre richiedere un autorizzazione generale mentre l Art 105 indica i casi in cui l utilizzo libero regolamentazione della fornitura dell accesso RLAN del pubblico alle reti e ai servizi pubblici di comunicazione elettronica es sistema TV wireless Decreto ministeriale 28 5 2003 e relative modifiche e Art 25 autorizzazione generale per reti e servizi di comunicazione elettronici del Codice delle comunicazione elettroniche uso privato Decreto ministriale 12 7 2007 PHILIPS
67. k of video can be affected by your PC performance and your wireless network bandwidth You can project high definition HD or standard definition SD video depending on the processing power of your PC The content protection on most DVD or Blu ray Disc movies might restrict watching the movie on a TV when the disc is playing on a PC The TV shows PC media files with a small delay Smart TV Videos photos and music 3 4 Pause TV and recording Smart USB recording With this TV you can pause a TV broadcast from a digital channel You can pause a I V broadcast to watch it later Simply connect a USB Hard Drive device to your TV and you can pause the broadcast If your TV is connected to the Internet you can also record or set a programmed recording of a digital broadcast In some countries recording is not supported What you need Smart USB recording and Pause TV only work with digital TV channels DVB broadcast or similar To pause To pause a digital broadcast you need to connect a USB Hard Drive Use a USB 2 0 compatible Hard Drive device with a minimum of 32GB Hard Drive space and a minimum writing speed of 30MB s Connect the USB Hard Drive to one of the two USB connectors on the side of the TV To record First check if the Programme guide supports recording With the Internet connected press f and select Programme guide If there is a Recordings button on the Programme guide page you can record programmes To
68. k on again e If sound interruptions occur persistently see the user manual of the device to check the output settings If that does not help connect an additional audio cable e If a DVI to HDMI adaptor is used check that an additional audio connection is in place to complete the DVI connection EasyLink HDMI CEC Check if the connected device supports the HDMI CEC standard and is properly set up Read the user manual that comes with the device Check if the HDMI cable is properly connected Check if EasyLink on the TV and device is switched on Make sure that the System audio control in your HDMI CEC audio devices is properly set up Read the user manual that comes with your audio device PC display he refresh rate of a PC connected to the TV with VGA or DVI to HDMI adapter should set to 60Hz Check that the correct resolution mode is selected on your PC See the list in Help gt Specifications gt Display resolutions 22 Troubleshooting Devices 6 6 Videos photos and music The files on my USB device are not shown e Set your device camera to Mass Storage Class compliant The USB device may need specific driver software Unfortunately this software cannot be downloaded to your TV Not all audio and picture files are supported See the list in Help gt Specifications gt Multimedia Files from a USB device do not play back smoothly he transfer performance of the USB device limits th
69. ld product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Specifications Environmental Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health Le 7 3 Power and reception Power Product specifications are subject to change without notice For more specification details of this product see www philips com support Power e Mains power AC 220 240V 10 e Ambient temperature 5 C to 35 C e Standby power consumption lt 0 15 W Power saving features Light sensor Eco mode Picture mute for radio Auto switch off timer Eco settings menu The power rating stated on the product typeplate is the power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 Reception e Aerial input 75 ohm coaxial IEC75 Tuner bands Hyperband S Channel UHF VHF e DVB DVB T terrestrial antenna COFDM 2K 8K DVB T2 only for TV types 1 12 DVB C cable QAM Analogue video playback NTSC SECAM PAL Digital video playback MPEG2 SD HD ISO IEC 13818 2 MPEG4 SD HD ISO IEC 14
70. luded on a separate leaflet Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products EMC regulation n order to maintain conformity to the Electro Magnetic Compat ibility EMC directive 2004 108 EC the mains plug on this product must not be detached from the mains cord In case the apparatus does not recover in DLNA Net TV mode user intervention is required Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicate
71. ly flick through your favourite channels With the list on screen press OPTIONS and select Select list Select Favourites from the list and press OK With this list selected you will only flick through your favourites Programme guide If programme guide information is available in your area you can open an on screen programme guide with scheduled TV programmes The Programme guide is provided by the broadcaster or Internet 12 Open the Programme guide While watching TV press A select Programme guide and press OK To quit the Programme guide without changing a setting press D Back First use The first time you open the Programme guide the TV scans all TV channels for programme guide information This can take several minutes The data is stored in the TV The TV can store programme data for up to eight days Programme guide options With a programme selected in the guide press OPTIONS to select the following Set reminder To set an on screen reminder for when a programme is due to start select Set reminder and press OK The programme is marked with a 9 Clock To cancel this reminder select Clear reminder and press OK Change day View the previous or next day s programmes More info Shows the programme details and summary Search by genre View all programmes selected by genre Scheduled reminders If reminder is set you can view a list of all scheduled reminders Update
72. mp immediately to the next occurrence of this word or number Press OK again to jump to the subsequent occurrence To stop the search press A until nothing is selected Text from a connected device Some connected devices that receive TV channels can also offer Text To open Text from a connected device press f amp select the device and press OK While watching a channel on the device press OPTIONS select Show device keys and select the E key and press OK Press D Back to hide the device keys To close Text press D Back again Digital Text UK only Some digital TV broadcasters offer dedicated Digital Text or interactive TV on their digital TV channels This includes normal Text using the number colour and navigation keys to select and navigate To close Digital Text press Back Text options In Text press OPTIONS to select the following Freeze page Dual screen e T O P overview Enlarge Reveal Cycle subpages anguage Freeze page To stop the automatic rotation of subpages press OPTIONS and select Freeze page Dual screen Full screen To show the TV channel and Text alongside each other press OPTIONS and select Dual screen Select Full screen to switch back to full screen view T O P overview To open T O P Text press OPTIONS and select T O P overview Enlarge To enlarge the Text page for more comfortable reading press z OPTIONS and select Enlarge To
73. ms and conditions before you can continue Press OK to agree Press D Back to quit Net TV Register If you agree you can register with Club Philips Select Register and press OK Enter your email address select Continue and press OK Confirm the email address a Parental control To lock Adult 18 rated apps switch on Net TV parental control by selecting Enable and then press OK Enter an unlock PIN code of your choice Confirm your PIN code Adult 18 rated apps are now locked To open a locked app select the app and press OK The TV will ask you to enter your 4 digit code Clear Net TV memory To redo the Net TV configuration and to clear all passwords PIN codes history and cookies press Home select Setup gt Network settings gt Clear Net TV memory Net TV apps Open Net TV To open Net TV press Home select Browse Net TV and press OK To dose Net TV press Home and select another TV activity The Net TV home page When you open Net TV the home page is shown To navigate the page press 4 v 4 or P To open an app select the app and press OK To go back 1 step press 9 Back The home page 1 The App Gallery 2 Your Apps 3 The Internet App 4 Current TV channel The App Gallery To look for apps to add to your home page select App Gallery and press OK To add an app to the home page select an app in the list and press Add To search per category select the category field
74. n your PC You can email a specific question or in some countries chat online to one of our collaborators Contact Philips For support you can call the Philips Consumer Care hotline in your country Find the telephone number in the printed documentation that came with the TV Or consult our website www philips com support TV model number and serial number You might be asked to provide the TV product model number and serial number Find these numbers on the packaging label or on the type label on the back or bottom of the TV 12 Getting started Help and support 2 Basics 2 4 Remote control Overview 1 Standby 5 To switch the TV on or back to standby 2 Home To open or close the Home menu 3 Navigation key To navigate up down left or night 4 OK key To activate a selection 5 Find Q To open or close the channel list or your list of photos music or movies 6 Adjust Hf To open or close the most used settings for picture sound Ambilight or 3D 7 CH Next Pl To switch to the next channel page or chapter Basics Remote control 8 CH Previous I lt To switch to the previous channel page or chapter 9 Source To switch directly to a TV connection 10 Options To open or close the Options menu 11 Back D To go back to the previous channel To exit a menu without changing a setting To go back to the previous Text or Net TV page 12 Volume lt I To adjust the
75. nalogue channels To make subtitles available for a channel switch to the channel and press TEXT to open Text Enter the page number for subtitles usually 888 and press TEXT again to close Text With subtitles switched on in the Subtitle menu subtitles will be shown if available Each analogue channel must be set up separately For digital channels There is no need to activate subtitles in Text for digital channels You can set a preferred primary and secondary subtitle language If these subtitle languages are not available for a channel you can select another available subtitle language To set the primary and secondary subtitle language press f and select Setup gt Channel settings and select Languages gt Primary and Secondary subtitles To select a subtitle language when none of your preferred languages is shown press OPTIONS select Subtitle language and select a language you want temporarily Audio languages Digital TV channels can broadcast audio that transmits several languages for a programme You can set the TV to switch to your preferred language if it is available Set your language To set your preferred audio language press f and select Setup gt Channel settings and select Languages gt Primary and Secondary audio The TV will automatically switch to one of your languages if one of them is available To check if an audio language is available press OPTIONS and select Audio language You can select
76. nd press OK Delete a recording To remove a recording select the recording in the list and press OPTIONS and select Delete recording Programme information To view more information on a programme select the programme in any programme guide list and press OK Depending on the status of this programme you can start watching schedule its recording playback the recording or delete the recording from this page Specifics While recording a programme you can watch a previously recorded programme While recording you cannot switch TV channels While recording you cannot pause the TV broadcast he Audio Description audio commentary for the visually impaired is not available for playback in Smart USB Recording Smart TV Pause TV and recording 3 5 Games Play a game Add a game console In the Home menu start Add your devices to add the console to the Home menu for easy selection later on When adding a game console to the Home menu select Game when the TV asks for the device type If your game console is an EasyLink HDMI CEC device it might add itself to the Home menu Smart setting Game The Smart picture setting Game sets the TV to the ideal Game settings without picture lag If your game console is added as Game in the Home menu the TV switches to the Game setting automatically If your game console has added itself in the Home menu as a Blu ray Disc player or DVD player you need to switch the
77. nnected USB keyboard to rename channels To connect a USB keyboard read Help gt Connections gt Connect more devices gt Keyboard and mouse Basics Watch TV Hide channel You can hide a channel in the Channel list When looking through channels a hidden channel will be skipped 1 In the Channel list highlight the channel you want to hide 2 Press OPTIONS and select Hide channel The channel is hidden as soon as you close the Channel list Show hidden channels You can recall all hidden channels and unhide them again 1 In the Channel list press OPTIONS and select Show hidden channels The Channel list now shows all channels again 2 Press OPTIONS and select Unhide all to unhide the previously hidden channels Or if you want to leave the previously hidden channels hidden press z OPTIONS and select Exit Favourite channels In the Channel list you can mark a channel as a favourite You can set the Channel list to only zap through your list of favourite channels To open the Channel list while you are watching TV channels press Q FIND Mark a channel as favourite While watching TV press Q FIND to open the Channel list Navigate to the channel you want to mark as favourite and press OPTIONS Select Mark as favourite In the Channel list the favourite channel is marked with a W You can unmark a favourite channel with Unmark favourite Channel list of favourites You can set the Channel list to on
78. nnel list copy gt Copy to USB and press OK To copy the Channel list from this TV you might be asked to enter the TV PIN code you entered during the installation 3 When copying is done unplug the USB memory device Now you can upload the copied Channel list onto another Philips TV Upload a Channel list To a TV that s not yet installed 1 Plug in the power plug to start the installation and select language and country You can skip Search for channels Finish the installation 2 Plug in the USB memory device that holds the Channel list of the other TV 3 To start the Channel list upload press A gt Setup gt TV settings gt Preferences gt Channel list copy gt Copy to TV and press OK You might be asked to enter the TV PIN code of this TV 4 The TV notifies if the Channel list is copied to the TV successfully Unplug the USB memory device To an already installed TV 1 Verify the country setting of the TV To verify this setting press ft gt Setup gt Search for channels gt Reinstall channels and press OK Press D Back and later Cancel to leave the Search for channels If the country Is correct continue with step 2 hereunder If the country Is not correct you need to start a reinstallation To start the reinstallation press A gt Setup gt TV settings gt Reinstall TV and press OK Select the correct country and skip the Search for channels Finish the installation When done return tO Step 2 2 Plu
79. not respond to the remote control Check that the batteries of the remote control are not empty or weak Check their orientation Clean the remote control and TV sensor lens e During start up which can take up to two minutes with connected devices the TV and some external devices do not immediately respond to commands from the remote control The device is functioning normally and is not broken The TV switches off and the red light flashes e Switch the TV off and on again with the switch at the bottom of the TV Check if there is enough space for ventilation Wait until the TV has cooled down If the TV does not restart from standby and the light flashes again call Consumer Care You forgot your code to unlock Child lock Read Help gt Smart TV gt Locks and timers gt Child lock Troubleshooting TV and remote control 69 6 3 TV channels Some TV channels are gone Check if the correct list is selected in the Channel list Press Q FIND to open the Channel list then press OPTIONS and select the list you need with Select list A channel could be hidden in the Channel list Read more about Channel list in Help gt Basics gt Watch TV gt Channel list No digital channel found during installation Check if the TV supports DVB T or DVB C in your country Check the Digital TV Country Compatibility sticker on the back of the TV 70 Troubleshooting TV channels 6 4 Picture and sound No pict
80. o In stereo mini jack 3 5mm e HDMI 1 in ARC v1 4 3D RBM 2p Tape EX HDMI 3 in v1 4 3D Audio In DVI to HDMI VGA stereo mini jack 3 5mm e Audio Out L R display synchronised optical Headphones stereo mini jack 3 5mm e Network LAN RJ45 TV Side HDMI Side in v1 4 3D e 2x USB e Common interface slot CAM e SD card slot SD High Capacity as Video stores memory 82 Specifications Connectivity 7 8 Dimensions and weights 58PFL9956 Width 1459 mm Height 668 mm Depth 1 mm Weight 26 kg With TV stand Height 735 mm Depth 260 mm Weight 29 kg UMv 3104 327 0060 1 110711 Specifications Dimensions and weights 83 Index 3 3D depth 23 3D glasses 23 3D 2D 19 3 223 3D start 23 A Adjust menu 16 Ambilight colour 40 Ambilight setup 40 Ambilight switch on 40 Audio Description 47 Audio Out delay 46 Auto switch off 38 B Balance 38 Black bars 21 C CAM 67 Channel list copy 42 Channel list options 18 Channel favourite 19 Channel hide 19 Channel rename 19 Channel reorder 18 Channel switch 18 Channel update 42 Glas 67 Cinema 21 9 format 21 Cinema 21 9 subtitle 21 Clock 43 Common interface slot 67 Component Video YPbPr 50 Connections 50 Connections guide 50 Consumer Care 68 D Device add 16 Device remove 16 Device rename 16 Device reorder 16 Digital Text 36 DTVi 30 DVB 43 DVD player connect 52 DVI to HDMI adapt
81. o Philips Register your TV and enjoy a range of benefits including full support including downloads privileged access to information about new products exclusive offers and discounts the chance to win prizes and even participate in special surveys about new releases Go to www philips com welcome Getting started Register your TV 11 1 5 Help and support Using Help and Search Help You can open Help from the Home menu In most cases you can also press the yellow key on your remote control to open or close Help directly For some activities like Text the colour keys have specific functions and cannot open Help Before you follow the Help instructions close Help Press the yellow key or press A to close Help When you press the yellow key again Help will open on the page where you closed it Q Search In Help use Q Search to find a topic you need Select a topic from the list with the navigation keys and press OK The topic you are looking for might not be on the first page but a few pages further on Press gt to go to the next page Online support To solve any Philips TV related problem you can consult our online support You can select your language and enter your product model number Go to www philips com support On the support site you can find your country s telephone number to contact us as well as answers to frequently asked questions FAQs You can download new TV software or the manual to read o
82. o change the main screen picture press Q FIND In the list select what you want to watch and press OK In the main screen you can watch a TV channel a connected device connected with HDMI the Text pages of the TV channel you are watching a Net TV app or Internet page the TV Programme guide or Help When you close and open Multi view again the last selected main screen is shown Switch to standby If the TV is on press D on the remote control to switch to standby The red standby key indicator is on Although the TV consumes very little power when on standby energy does continue to be consumed When you do not use the TV for an extended period of time switch the TV off completely with the power switch Auto switch off If you use the TV as a monitor or use a digital receiver to watch TV a set top box STB and you do not use the remote control of the TV switch off the automatic switch off This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TY 21 To switch off the automatic switch off press the green key while you are watching V channels and select Auto switch off and select Off 22 Basics Watch TV 24 3D What you need This is a 3D Max IV To watch 3D on this TV you will need the Philips 3D Max active glasses PT A516 sold separately Other active 3D glasses might not be supported To ensure the IR reception of the glass
83. of the TV to look for the Quick Start Guide to download Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel The TV wall mounting should meet safety standards according to the TV s weight Read also the safety precautions before positioning the TV Koninklijke Philips Electronics N V bears no responsibility for improper mounting or any mounting that results in accident or Injury VESA info Your TV is prepared for a VESA compliant wall mount bracket sold separately VESA codes to purchase the bracket VESA MIS F 400 300 M6 Use a screw length as shown in the drawing Position the TV Carefully read the safety precautions before you position the TV Position the TV where light does not shine directly on the screen Dim lighting conditions in the room for best Ambilight effect Position the TV up to 25 cm away from the wall for the best Ambilight effect Getting started Setting up Position the TV at the ideal viewing distance Get more from HD TV picture or any picture without straining your eyes Find the sweet spot right in front of the TV for the best possible TV experience and relaxed viewing The ideal distance to watch TV from is three times its diagonal screen size When seated your eyes should be level with the centre of the screen For best sound place the TV on a hard surface Safety Read and understand all instructions before you
84. ol of the TV can also operate a connected device The device must have EasyLink HDMI CEC and have it switched on The device must also be connected with an HDMI cable Operate an EasyLink device To operate such a device with the TV remote control select the device or its activity in the ft Home menu and press OK The commands of all keys except the ft key the Hf ADJUST key and the OPTIONS key are forwarded to the device If the key you need is not on the TV remote control you can show extra keys on screen with Show device keys Show device keys To show the device keys on screen press OPTIONS and select Show device keys Select the key you need and press OK To hide the device keys press 9 Back Basics Connected devices In general these keys open the following device menus 1 Home menu 2 Setup menu 3 Disc menu disc content 4 Pop up menu 5 Options menu 6 Programme guide 7 Media selection Read more about EasyLink in Help gt Setup gt Devices gt EasyLink HDMI CEC 25 2 6 Subtitles timers and locks Subtitles Programme subtitles are available most of the time You can switch subtitles on or off How to set subtitles depends on whether a channel is analogue or digital Switch on subtitles To open the Subtitle menu press SUBTITLE You can switch subtitles On or Off Select On during mute to show subtitles only when the sound is muted with K SUBTITLE For a
85. on add a digital audio cable optical Digital Audio OPTICAL Blu ray Disc DVD player Use an HDMI cable to connect the device to the TV 52 Connections Connect devices Blu ray Disc player DVD player HDMI Home Theatre System with disc player Use an HDMI cable to connect the device to the TV Home Theatre System m If you use the HDMI ARC connections on both TV and device no other cable is needed If not read on Home Theatre System HDMI If you do not use the HDMI ARC connection add a digital audio cable optical Connections Connect devices 53 Home rheatre System AUDIO IN Audio to Video synchronisation sync If the sound does not match with the video on screen you can set a delay on most DVD Home Theatre Systems to match the sound and video Read more about Audio to Video sync in Help gt Setup gt Devices Audio to Video sync Do not connect the audio signal from a DVD player or other device directly to the Home Theatre System Always route the sound through the TV first Recorder Use 2 antenna cables to connect the antenna to the device and the IV Recorder mr n C B3 eec Add an HDMI cable to connect the device to the TV 54 Connections Connect devices Recorder Digital receiver Satellite receiver If you use a digital receiver to watch TV a set top box STB and you do not use the remote control of the T
86. on screen Auto fill Automatically enlarges the picture to fill the screen Minimal picture distortion subtitles remain visible Not fit for PC input Auto zoom Automatically zooms the picture in to fill the screen as much as possible without distortion Black bars may be visible Not fit for PC input 16 9 Sets the picture in 16 9 format for HD 16 9 broadcast e Super zoom Removes the black bars on the side of 4 3 broadcasts The picture is adjusted to fit the screen e Super zoom 16 9 Sets the picture in 16 9 format with minimal distortion for 4 3 broadcast Movie expand 16 9 Scales the picture to a 16 9 format Cinema 21 9 Sets the picture in cinema 21 9 format for original 21 9 movies Cinema 21 9 subtitle Sets the picture in cinema 21 9 format but subtitles in the bottom black bar are visible Unscaled Expert mode for HD or PC input Pixel for pixel display Black bars may appear with pictures from a PC Wide screen Stretches the picture to a 16 9 format Multi view With Multi view you can watch two screens simultaneously When you open Multi view the TV shows two screens one main and one small screen Basics Watch TV c Open Multi view To open Multi view press ft Home select Multi view and press OK With the remote control you can operate the main screen To close Multi view press FORMAT or press A Home and select another activity Main screen picture T
87. ork 44 4 5 Devices 46 4 6 Universal access 47 4 7 Software 48 5 Connections 49 5 1 First connections 49 52 Cables and connections 50 S Connect devices 52 5 4 Connect more devices 60 o9 Network 65 5 6 SD card 66 5 7 Common interface CAM 67 6 Troubleshooting 68 6 1 Contact information 68 6 2 TV and remote control 69 6 3 TV channels 70 6 4 Picture and sound 71 6 5 Devices 72 6 6 Videos photos and music 73 6 Network 74 7 Specifications 75 7 1 Software 75 72 Environmental 76 73 Power and reception 78 n Display and sound 79 15 Display resolutions 80 76 Multimedia 81 Tete Connectivity 82 78 Dimensions and weights 83 Index 84 Contents 1 Getting started 1 1 TV tour Cinema 21 9 This Cinema 21 9 TV perfectly matches the original movie format and is equipped with a full High Definition HD display A full HD 2560x1080p the highest resolution of HD sources This display offers a brilliant flickerfree progressive scan picture with optimum brightness and superb colours Advanced formatting technology continuously analyses the incoming signals and progressively stretches non 21 9 images to full screen and avoids distortion Smart TV Smart V Connect your Smart TV to the Internet and you can rent a movie from your home browse the Net TV apps watch programmes you missed or check the TV guide View your photos and videos from your PC tablet PC or phone Connect a USB Hard Drive and pause a TV
88. os esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE Italiano Con la presente Philips Innovative Applications N V dichiara che ques to televisore conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE Portugu s Philips Innovative Applications N V declara que este televisor est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE EAAnvika ME THN IIAPOY2A H Philips Innovative Applications N V AHAONEI OTI H THAEOPAZH 2YMMOP ONETAI FIPOX TI OYZIOAEIZ AMAITHZEI KAI TIX AOI E 2XETIKE2 AIATA EI2 TH OAHTIA2 1999 5 EK Svenska Harmed intygar Philips Innovative Applications N V att denna TV star i verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framg r av direktiv 1999 5 EG Norsk Philips Innovative Applications N V erkl rer herved at utstyret TV er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999 5 EF Dansk Undertegnede Philips Innovative Applications N V erkl rer herved at dette TV overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Suomi Philips Innovative Applications N V vakuuttaa t ten ett t ma televi sio on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen Polski Firma Philips Innovative Applications N V niniejszym
89. ou can select another channel to lock or unlock The lock is activated as soon as you close the menu You cannot lock programmes from connected devices Change code To change the current lock code press f and select Setup gt Channel settings and select Child lock gt Change code Enter the current code and then enter the new code twice The new code is set Forgotten your code To override the code if you forget it enter 8888 Sleep timer With the sleep timer you can set the TV to switch to standby automatically after a specified time To set the sleep timer press ft gt Setup gt TV settings gt Preferences gt Sleep timer With the slider bar you can set the time up to 180 minutes in increments of 5 minutes If set to O minutes the sleep timer is switched off You can always switch off your TV earlier or reset the time during the countdown Basics Subtitles timers and locks 3 Smart TV 3 1 Net TV What is Net TV Net TV offers Internet applications called apps These apps are tailored for your TV With these apps you can read your national newspaper look at infotainment or rent a movie from a video store or watch programmes you missed with catch up TV apps A wide range of Net TV apps are available depending on your country Smart USB Recording With your TV connected to the Internet you can also record programmes from the TV programme guide To record programmes you must connect a USB Hard Disk
90. press OPTIONS select Audio language and look for an audio language marked with a If Universal access does not appear in the Options menu switch on Universal access in the Setup Read Help gt Setup gt Universal access gt Switch on Visually impaired Some digital TV channels broadcast special audio called Audio Description for visually impaired people The audio consists of a narrator describing what is happening in the programme during the pauses in the normal audio Switch on To switch this visually impaired audio press OPTIONS select Universal access and press OK Select Visually impaired and select On or if available select the speakers the adapted audio should be played from If available the TV will play the visually impaired audio Volume Visually impaired If available you can set the volume of the extra commentary To check whether a visually impaired audio language is available press OPTIONS select Audio language and look for an audio language marked with a a If Universal access does not appear in the Options menu switch on Universal access in the Setup Read Help gt Setup gt Universal access gt Switch on Key beep Key beep gives an audio feedback each time you press a key on the remote control The volume of the beep is fixed Setup Universal access Switch on To switch on Key beep press OPTIONS select Universal access and press OK Select Key beep and select On If
91. programme guide After the first scan the TV stores the programme guide data If you update or reinstall channels or reorder the Channel list you will need to update the Programme guide To update select Update programme guide Reminders are cleared Broadcaster or Network To select where the Programme guide information comes from press l gt Setup gt TV settings gt Preferences gt Programme guide Select From the network or From the broadcaster From the network Until you link up with Net TV programme guide information comes from the broadcaster Once you are connected with Net TV the TV switches automatically to the Internet for programme guide information From the broadcaster Guide information comes from the broadcaster operator Smart picture and sound settings 20 For easy picture or sound adjustment you can select a preset setting for each While watching TV press ttt ADJUST to open the Adjust menu and select Smart picture or Smart sound Make a selection from the list and press OK 2 Hl Smart picture and Smart sound Smart settings are a combination of preset settings suited to a specific use such as gaming or daylight viewing You can adjust a specific setting like Brightness or Contrast Bass or Treble of a chosen smart setting The smart setting will remember the adjustments you made Adjust smart settings To adjust a specific setting of a smart setting select the smart setting and press
92. ps com support Ireland 0160 11 161 free Sverige 08 5 92 9100 lokalsamtal Northern Ireland 0800 055 6882 C CHAT wwwohilips com support KasakcraH 007 727 250 66 17 lokal Thailand uUsstmalnu 66 2 652 8652 Latvia 527 3 691 local T rkiye 0800 261 3302 ehiri i arama Lithuania 6 228896 local C CHAT www philips com support Luxembourg Luxemburg United Kingdom 0800 331 6015 toll free 0800 26 550 kostenlos gratuit C CHAT www philips com support C CHAT www philips com support Non contractual images Images non contractuelles AuBervertragliche Bilder All registered and unregistered trademarks are property of their respective owners Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2011 Koninklijke Philips Electronics N V All rights reserved www philips com
93. r service or repairs Any operation expressly prohibited in this manual or any adjust ments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Open source software This television contains open source software Philips hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain the source code please contact open source philips com If you prefer not to use email or if you do not receive a confirmation receipt within a week after mailing to this email address please write in English to Open Source Team Philips Intellectual Property amp Standards PO Box 220 5600 AE Eindhoven The Netherlands If you do not receive timely confirmation of your letter please send an email to the email address above The texts of the licences and acknowledgements for open source software used in this product are inc
94. ress Search again If you want to store the channel select Done and press OK 3 Fine tune To fine tune a channel select Fine tune and press OK You can fine tune the channel with 4 or v f you want to store the channel found select Done and press OK Setup Channels 4 Store You can store the channel on the current channel number or as a new channel number Select Store current channel or Store as new channel You can redo these steps until you found all available analogue TV channels Clock settings In some countries digital broadcasts do not send UTC Coordinated Universal Time information The daylight saving change might be ignored and the TV might show an incorrect time To correct the TV clock press ft gt Setup gt TV settings gt Preferences gt Clock and select Country dependent Select Daylight saving and select the appropriate setting To set the time and date manually select Manual Then select Time or Date 43 4 4 Network Benefits Browse PC If you connect the TV to a home network you can play photos music and videos from your computer or storage device Once the network is installed on the TV you can find and play the files from your PC on the TV screen Net TV If you connect the TV to a home network with an Internet connection you can link up the TV to Net TV Net TV offers Internet services and websites tailored to your TV Play music and videos consult infotainment rent movies an
95. scroll down the page press W or A Reveal To unhide hidden information on a page press OPTIONS and select Reveal Cycle subpages To cycle subpages when these are available press z OPTIONS and select Cycle subpages Language To switch the group of characters that Text uses to display correctly press OPTIONS and select Language Text setup Smart IV Text Text language Some digital TV broadcasters have several Text languages available To set your primary and secondary Text language press ft gt Set up gt Channel settings and select Primary or Secondary Text and select your preferred Text languages Text 2 5 If available Text 2 5 offers more colours and better graphics Text 2 5 Is activated as a standard factory setting To switch it off select fft gt Setup gt TV settings gt Preferences gt Text 2 5 Smart IV Text 37 4 Setup 4 1 Picture and sound Picture In the Picture menu you can adjust all picture settings individually To open the Picture settings press ft gt Setup gt TV settings gt Picture Contrast Sets the contrast level of the picture Brightness Sets the brightness level of the picture Colour Sets the level of colour saturation Hue If NTSC is broadcast hue compensates the colour variations Sharpness Sets the level of sharpness of fine detail Noise reduction Filters out and reduces the image noise in the picture e Tint S
96. t the wall mount can safely bear the weight of the TV set Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage Parts of this product are made of glass Handle with care to avoid injury or damage Getting started Setting up Risk of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the mounting surface Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support each children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries The remote control may contain coin type batteries which can easily be swallowed by small children Keep these batteries out of reach of children at all times Risk of overheating Never install the TV in a confined space Always leave a space of at least 10 cm or 4 inches around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the
97. ten to music you can switch off the TV screen to save energy Select Screen off and press OK To switch the screen back on press any key on the remote control Light sensor The built in light sensor automatically adjusts the picture together with Ambilight to the lighting conditions of the room To switch on select Light sensor and press OK To switch off press OK again Auto switch off If no keys on the TV remote control were pressed during a 4 hour period the TV switches off automatically to save energy You can switch off this Auto switch off If you use the TV as a monitor or use a digital receiver to watch TV a set top box STB and you do not use the remote control of the TV switch off the automatic switch off Smart settings If you select a Smart setting in the ADJUST menu you can again change the settings of the selected Smart setting with the Picture and sound settings in Setup The Smart setting remembers your changes Setup Picture and sound Reset a Smart setting To reset a Smart setting to its original values select the Smart setting you want to reset in the ADJUST menu Then press A gt Setup gt TV settings gt Picture select Reset press OK and confirm Read more about using Smart picture and sound settings in Help gt Basics gt Watch TV gt Smart picture and sound settings ISF Calibration Get the most out of your HD TV display with ISF Calibration An ISF calibration expert comes to
98. the TV The TV starts formatting the SD card automatically The SD card may be rejected if the write speed is insufficient for video transfer Once formatted leave the card permanently in the slot SD memory card size Use a SD HC High Capacity memory card with at least 4GB of storage capacity For high definition HD video use an SD card with at least 8GB of storage capacity Use a speed class 2 card or more Open a video store app To open a video store press A Home select Net TV and press OK Select a video store app from the Net TV home page Select the video store and press OK You can add a video store app on your home page from the app gallery Availability of video stores varies by country Smart TV Net TV Rent a video When you open a video store you will be asked to log in or to create a log in account With a text entry field selected press OK to open the on screen keyboard Consult the video store website for more information Online TV With the online TV apps in Net TV you can watch programmes you missed Most often you can recognise such an online TV app by its broadcaster s logo What you need To watch online TV programmes you need a high speed broadband Internet connection to the TV Read more about connecting to the network in Help gt Setup gt Network Watch online TV To watch an online TV programme in Net TV press A Home select Browse Net TV and press OK Select the broadcaster app
99. trol to switch the TV and all EasyLink devices to standby Read more about EasyLink in Help gt Setup gt Devices gt EasyLink HDMI CEC IR sensor Always make sure you point the remote control at the remote control infrared sensor on the front of the TV Basics Remote control Batteries To replace the batteries of the remote control slide open the small tray at the bottom of the remote control Use 2 coin shaped batteries Type CR2032 3V Make sure the side of the batteries top side point upwards The small tray has a indicator Remove the batteries if you are not using the remote control for a long time Dispose of batteries according to the end of use directives Read Help gt Specifications gt Environmental gt End of use Cleaning Your remote control is treated with a scratch resistant coating To dean the remote control use a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV or remote control Basics Remote control T5 2 2 Menus ft Home In the Home menu you start watching TV or start watching a movie disc or any other TV activity Press fft to open the Home menu To start an activity select it with the navigation keys and press OK To close the Home menu press again Add your devices A connected device should be added to the Home menu for easy selection If your connected device does not have EasyLink HDMI CEC or
100. try and improve the reception To check the reception quality of a digital channel switch to the channel and press ft gt Setup gt Channel settings and press OK Select Channel installation gt Digital reception test and press OK The digital frequency is shown for this channel If the reception is poor you can reposition your antenna To check the signal quality of this frequency again select Search and press OK To enter a specific digital frequency yourself select the frequency position the arrows on a number with gt and and change the number with 4 and v To check the frequency select Search and press OK If you use DVB C to receive channels the options Symbol rate mode and Symbol rate are available For Symbol rate mode select Automatic unless your cable provider gave you a specific symbol rate value To enter the symbol rate value use the number keys Manual installation Analogue Analogue TV channels can be manually tuned in channel by channel To install analogue channels manually press ft gt Setup gt Channel settings and press OK Select Channel installation gt Analogue manual installation and press OK 1 System To set up the TV system select System and press OK Select your country or part of the world where you are now 2 Find channel To find a channel select Find channel and press OK Select Search and press OK You can also enter a frequency yourself If the reception is poor p
101. u made the connection 60 Connections Connect more devices If the list with the content of the camera does not appear automatically your camera might need to be set to transfer its content with PTP Picture Transfer Protocol Read the user manual of the digital photo camera Camcorder Connect a camcorder to the side or back of the TV You can use an HDMI YPbPr or SCART connection If your camcorder only has Video CVBS and Audio L R output use a Video Audio L R to SCART adapter to connect to the SCART connection See the following pages to connect your camcorder Use an HDMI cable to connect the camcorder to the side of the Or use a SCART adapter to connect the device to the TV Connections Connect more devices SCART Audio UR L R fa Keyboard and mouse USB keyboard You can connect a USB keyboard to enter text on your TV With a keyboard connected you can type in a new channel name or type in what you are looking for in the YouTube app in Net TV Install Switch the TV on and connect the USB keyboard to one of the USB connections on the side of the TV When the TV detects the keyboard you can select your keyboard lay out and test your selection If you select a Cyrillic or Greek keyboard lay out first you can select a secondary Latin keyboard lay out To change the keyboard lay out setting press ft gt Setup gt TV settings gt Preferences gt USB mouse and keyboard gt
102. ure Check if the antenna is connected properly Check if the correct device is selected and connected properly e Check the contrast or brightness setting in ft gt Setup gt TV settings gt Picture gt Contrast or Brightness The picture is poor Bad weather can influence the picture quality Check if the antenna is connected properly Non earthed audio devices neon lights high buildings or mountains can influence the picture quality Try to improve the picture by changing the position of the antenna or placing devices away from the TV Check that the correct TV system is chosen in the Manual installation menu e If only a certain channel is poor try to fine tune this channel with the Fine tune menu Read Help gt Setup gt Channels gt Manual installation Analogue The picture has poor colour e Check the colour settings in f gt Setup gt TV settings Or press OPTIONS to select a Smart picture setting Picture delay when a game console is connected e To prevent picture delay press OPTIONS select Smart picture gt Game The TV does not remember my settings when switch it back on Check whether the TV is set to the Home location Press fit gt Setup gt TV settings gt Preferences gt Location The picture does not fit the screen e Press OPTIONS Picture format and select Auto fill The picture position on screen is not correct e To correct a shifted picture press OPTIONS
103. urity on your router enter the passphrase with the remote control To open the on screen keyboard select the text entry field and press OK If you have WEP security encryption the TV asks for the WEP encryption key in hexadecimal numbers Find this hexadecimal key in the router software on your PC Write down the first key of the WEP keys list and enter it on TV with the remote control If the security key is accepted the TV is connected with the wireless router If asked agree to the End User License Agreement Wi Fi Media Connect With Wi Fi MediaConnect you can bring up project your PC screen on the TV screen wirelessly Look up the code on the product introduction booklet to download this PC software for free Wi Fi MediaConnect is only available for PC Setup Network What you need To use Wi Fi MediaConnect you need to connect the TV to your home network You need a wireless router Read more about connecting to a network in Help gt Setup gt Network Install Wi Fi MediaConnect 1 On your PC go to www philips com wifimediaconnect 2 On the website check the necessary PC system requirements 3 Enter the code printed on the product introduction booklet 4 Click the Download now button to download the free Wi Fi MediaConnect software 5 Once downloaded start the file Wi Fi MediaConnect setup exe Follow the instructions on screen TV network name If you have more than one TV in your home network you can
104. use the TV If damage is caused by failure to follow instructions the warranty does not apply Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use Never expose the TV remote control or batteries to excessive heat Never place them near burning candles naked flames or other heat sources including direct sunlight Never insert objects into the ventilation slots or other openings on the TV Never place heavy objects on the power cord Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Ensure that no strain is exerted on the power cord when you swivel the TV screen To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times Risk of injury or damage to the TV e wo people are required to lift and carry a TV that weighs more than 25 kg or 55 Ibs e If you mount the TV on a stand only use the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the weight of the TV and the stand When wall mounted ensure tha
105. w hours The condensation moisture will not harm the TV or cause malfunction 1 3 Keyson the TV Power switch Switch the TV on or off with the power switch at the right hand side of the TV When switched off the TV does not consume any energy If the red indicator light is off switch on the TV with the power switch If the red indicator is on standby indication press D on the remote control to switch on the TV Alternatively you can switch on the TV from standby with CH CH or f it takes a few seconds for the TV to start up lt Volume Press lt Volume or to adjust the volume Or use the or keys on the remote control AN Ambilight 10 Press Ambilight to switch Ambilight on or off While the TV is on standby you can switch Ambilight on and create an Ambilight Lounge light effect in your room Read more about Ambilight and Lounge light in Help gt Setup gt Ambilight AMBILIGHT A Home Press fft Home to open the Home menu on screen You can navigate the Home menu with the volume or left or right and the channel or down or up keys on the TV To confirm your choice press again Read more about Home in Help gt Basics gt Menus gt ft Home CH Channel Press CH Channel or to switch channels Or use the PI or Ia keys on the remote control Getting started Keys on the TV 1 4 Register your TV Congratulations on your purchase and welcome t
106. wer cable always pull the plug never the cable Although this TV has a very low standby power consumption switch off the TV with the power switch to save energy if you do not use the TV for a long period of time Read more about the power switch in Help gt Getting started gt Keys on the TV gt Power switch Make sure the power cable is securely inserted into the TV Make sure that the power plug in the wall socket is accessible at all times Antenna cable Locate the antenna connection at the back of the TV Insert the antenna cable securely into the Antenna T socket Connections First connections ANTENNA IW 752 49 5 2 Cables and connections Cable quality Before you connect devices to the TV check which connectors are avallable on the device Connect the device to the TV with the highest quality connection available Good quality cables ensure a good transfer of picture and sound Read the other chapters of Cables and connections The connections diagrams shown in Help gt Connections gt Connect devices are recommendations Other solutions are possible Visit the Philips support webpages www philips com support and start the Connectivity guide for TV The guide can help you to connect the devices you have at home HDMI An HDMI connection has the best picture and sound quality One HDMI cable combines video and audio signals Use an HDMI cable for High Definition HD TV signals An HDM
107. xt TV channel and switch back Navigate iT V pages You can use the navigation and colour keys the number keys and the CO Back key to navigate the iTV pages You can use the Play M Pause and Stop keys to watch videos within iT V pages Digital Text UK only To open Digital Text press TEXT To close press 9 Back HbbTV links Some HbbTV pages have links to the Internet Your TV switches to Net TV to view these Internet websites To switch back to normal TV viewing you might need to press Home and select Watch TV again to continue watching the TV channel Block HbbTV pages To block the HbbTV pages from a specific channel tune to the channel press OPTIONS and select HbbTV on this channel and select Off To block HbbTV on all channels press Home select Setup and select TV settings gt HbbTV and select Off Open DTVi pages If the TV is installed for country Brazil DTVi is active The DTV applications are provided by the broadcasters The D TVI application pages offer all kinds of interactivity and entertainment To fully enjoy DT Vi you need a high speed connection to the Internet Read more about connecting the TV to the Internet in Help gt Setup gt Network 30 Open DTVi When you tune to a TV channel that offers DIVi wait for the icon to fully load the application The DI Vi application opens automatically or you might need to press OK To close DIVi press Exit Navigate D
108. y of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain the source code please contact open source philips com If you prefer not to use email or if you do not receive a confirmation receipt within a week after mailing to this email address please write in English to Open Source Team Philips Electronics Intellectual Property and Standards P O Box 220 5600 AE Eindhoven The Netherlands Read the Open Source Licences in Help gt Getting started gt Open Source Licences Specifications Software 75 7 2 Environmental ENERG SO XXPFLDOOQOC XX EU Energy Label U z y T A ENEPTEI EMERGUA ENIRGY ENE SG XYZ EU Energy label The European Energy Label informs you on the energy efficiency cass of this product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of this product in use and the average energy consumption for 1 year You can also find the power consumption values for this product on the Philips website for your country at www philips com TV Energy saving 76 Specifications Environmental Light sensor To save energy t
109. yer 2 screen press the Player 1 2 selection key on the glasses In and out of split screen view In two player split screen view you can switch back and forth from split screen to combined view to be able to read the game menu or game scores To switch views back and forth press OK on the remote control of the TV Stop Two player game To stop the two player split screen view press Home and select another activity Specifics To make Two player gaming available in the menu select 3D in the same menu select 2D in the list and press OK ps 3 66 Text Text pages Open Text To access Text while you are watching TV channels press TEXT To close Text press TEXT again TEXT Select a Text page To select a page Enter the page number with the number keys e Press Pl or I e Press A or v Press a colour key to select a colour coded subject at the bottom of the screen Le 2x wa Frae Buy 3 Text sub pages A Text page number can hold several subpages The subpage numbers are shown on a bar next to the main page number To select a subpage press 4 or gt T O P Text pages Some broadcasters offer T O P Text To open T O P Text pages within Text press OPTIONS and select T O P overview 36 Search Text You can select a word and scan Text for all occurrences of this word Open a Text page and press OK Select a word or number with the navigation keys Now press OK again to ju
110. your home and sets the TV to the most optimal picture setting Additionally the expert can set an ISF Calibration for Ambilight Ask your dealer for an ISF Calibration of your TV The ISF Calibration expert stores and locks the ISF settings as 2 Smart picture settings Once the ISF Calibration is done press tM ADJUST select Smart picture and press OK Select ISF Day to watch TV during bright light conditions or select ISF Night for dark light conditions An ISF Calibration can be done on every activity in the Home menu like Watch TV or a connected Blu ray Disc player Calibration benefits are better picture clarity and sharpness better detail in bright and dark parts deeper and darker blacks better colour purity and quality reduced energy consumption Expert picture settings When ISF Day or ISF Night is selected while an ISF Calibration is not yet performed on the TV some expert picture settings are available Press fft Home gt Setup gt TV settings gt Picture gt ISF expert settings and press OK Reset Smart picture settings To reset a Smart setting to its original values select the Smart setting you want to reset in the ADJUST menu Then press Home gt Setup gt TV settings gt Picture select Reset press OK and confirm Setup Picture and sound 39 42 Ambilight Placement For the best Ambilight effect Dim the lighting conditions in the room and position the TV up to 25 cm

Philips Cinema 21:9 Platinum Series Smart LED TV 58PFL9956T

Contents

Download Pdf Manuals

Related Search

Related Contents