Raw International OPB1 flat panel wall mount
Contents
1. ES TO THE SCREEN Place the screen face down on soft cloth to prevent damage on a flat surface The fixings you use is dependent on the make and model of your screen There are different sets of fixings supplied with the bracket Only ONE set of fixings will be required In order to ascertain which set of fixings will be required screw fixings in the back of the screen before attempting to attach front plates Only ONE set of fixings will be of the correct diameter for your screen It is important that the front plates are fixed as centrally as possible to screen To help achieve this there is a 3mm hole in the centre of each of the front plates Line this hole up so it is equal distance between the top and bottom fixings on the back of the screen FIG 2 Once it is lined up the nearest fixing hole on the front plates to the top fixing on the screen are the ones that should be fixed first using appropriate screws washers isolators spacers FIG 3 Then fix the bottom two fixings through the slots using appropriate screws washers isolators spacers Please use an Allen key to tighten all four fixings Only use isolators if back of screen is not flush with the front plates steel washer nylon isolator 3 ENGAGING SCREEN WITH THE WALL Lift the display minimum 2 people with front plates attached so that the slots on the back of the front plates engage with the slot on the wall mounting plate FIG 4 the screen is now safely su2. odisi OPBI INSTRUCTION MANUAL 1 MOUNTING WALL PLATE Remove security screw using the handle at the bottom of bracket and detach front plate Mount wall plate FIG 1 on wall in desired position using screws bolts suitable to construction of the wall If in any doubt please consult a qualified builder Attach screws bolts through as many holes slots as possible There are a total of 18 fixing holes on the back plate however the minimum amount of fixings that Raw International recommend is six If in any doubt as to strength of fixings please consult a qualified builder Mounting holes slots ol l fe O 3mm_ p AG A NE A J p j hole equal distance to n 3mm hole int i al H o oT H o fixings holes on N i back of screen screen CONSULT AUTHORISED SERVICE PERSONNEL FOR THE INSTALLATION OF THIS UNIT INSTRUCTIONS MUST BE FOLLOWED PRECISELY FOR SAFE AND STABLE INSTALLATION RAW INTERNATIONAL ARE NOT LIABLE FOR ANY DAMAGE OR INJURY CAUSED BY MISHANDLING OR IMPROPER INSTALLATION List of components included M4x60mm x4 M5x7 5mm x4 M5x20mm 4 M420mm x 4 M5x55mm x 4 3mm hex key 4mm hex key 1 M6x55m x 4 M8x75mm x 4 M amp 8x20mm x 4 M6x20 x 4 M8 amp x55mm x 4 5mm hex key x1 6mm hex key x 1 Spacers 17x8 3x5 x 4 17x8 3x20 x4 17x8 3x40 x 4 17x8 3x10 x 4 17x8 3x30 x 4 2 ATTACHING FRONT PLAT
3. spended bracket screen steel fixings front plates screen 4 SECURITY Once the screen is safely suspended please tighten the handle at the bottom of the front plates This engages the front plates to the wall mounting plate to ensure the screen cannot be lifted from the wall FIG 5 Raw International Unit 6 High Cross Centre Fountayne Road Totten ham N15 4QN
Download Pdf Manuals
Related Search