APart E-VOL60 remote control
Contents
1. E VOL60 dDaptc Volume Control Introduction The APart E VOL60 is a 100 Volt volume control that can handle up to 60 watt of power It is very durable due to the step by step attenuation in 11 steps zero position The volume control is equipped with a 24V priority relais This way a microphone call will always come through at maximum volume no matter what position the volume control is in The E VOL60 is build on a universal chassis that can easily be integrated with Gira Jung and Euro Different cover plates are available for the UK market Please avoid Please avoid any power overload measure your speakerlines before connecting In reality a lot of speakers have much higher load than the value listed in their specification Our APART speakers are especially engineered within their specification so no risk for overload when using them Please never apply clipped or overloaded levels from your amplifier to this volume control It may cause overheating and damage Our APART amplifiers are automatically limited to avoid such distorted signals Tech Specifications Type Euro Handling power 60 watt Voltage 100 Volt 24V priority Yes 20mA Attenuation steps 11 0 Build in box E MODIN Build on box E MODON Dimensions H x W x D 80 x 80 x 70 mm Weight 0 3 Kg Colour white 2 WIRE CONNECTION TOTAL LOUDSPEAKER POWER 3 60 WATTS MAXIMUM2. com frrr USE ONLY HIGH IMPEDANCE 100VOLT LOUDSPEAKERS OO F F 000000 WWW APART AUDIO COM qp E VOL60 AMP c Volume Control 4 WIRE CONNECTION WITH PRIORITY TOTAL LOUDSPEAKER POWER 3 60 WATTS MAXIMUM err USE ONLY HIGH IMPEDANCE 100VOLT LOUDSPEAKERS CON Amplifier IN L 24Volt Priority output e g You can use one of these APart amplifiers to connect up to 50pcs volume controllers MA200 MA200R MA200CDR MA125 PA240P only 30pcs Microphone 0000000 BD What does a priority system do When the volume controller is turned to 0 there is no background music e g meeting room office At this moment if there is a microphone call the information is lost With the priority system connected the volume controller is set to maximum volume during the microphone call In this way there is no information lost To be able to use a priority system you need the following components Volume controller with priority relay E VOL60 E VOL120 Amplifier with 24Volts priority output contact 24Volts 1A you can connect up to 60pcs of volume controllers 4 wire cable connection Microphone MICPAT D Mounting Keep the inside of the wallbox clear of all wires this to prevent short circuits between the wires in the wallbox and the printed circuit of the volum
3. e controller Don t use solid copper conductor wires the screw connectors on the printed circuit board of the volume con troller are designed for flexible wires Don t connect more then one wire in each onboard screw connectors of the volume controller Don t use force when mounting the volume controller in the wallbox WWW APART AUDIO COM
Download Pdf Manuals
Related Search