Home

Seagate Barracuda 7200.11 1.5TB

1. RoHS MCV X indicates the hazardous and toxic substance content of the part at the homogenous material level s over the threshold defined by the China RoHS MCV Standard X RoHS MCV 2 14 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing eguivalent to 10 years exposure to light industrial environments containing sulfurous gases chlorine and nitric oxide classes G and H per ASTM B845 However this accelerated testing cannot duplicate every potential application environment Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment The silver copper nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide chlo ride and nitrate contaminants Sulfur is found to be the most damaging In addition electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly PCBA or exposed to an ambient relative humidity greater than 95 Materials used in cabinet fabrication such as vulca nized rubber that can
2. Security Erase Unit FAy Security Freeze FSH Security Set Password F 14 Security Unlock F24 Seek TOH Set Features EFy Set Max Address F9 Note Individual Set Max Address Address 00H commands are identified by the value Password 014 placed in the Set Max Features regis Lock 024 ter as defined to the right Unlock 034 Freeze Lock 044 Set Max Address Extended 37H Set Multiple Mode Sleep E6H S M A R T Disable Operations D9H S M A R T Enable Disable Autosave D2H S M A R T Enable Operations BOH S M A R T Execute Offline BOH DA S M A R T Read Attribute Thresholds D1y S M A R T Read Data BOH DOH S M A R T Read Log Sector BOH DOH S M A R T Return Status BOH DAH S M A R T Save Attribute Values BOH D3y S M A R T Write Log Sector DOH Standby E24 Standby Immediate E04 Write Buffer E84 Write DMA CAH Write DMA Extended 35H Write DMA FUA Extended CDH Write DMA Without Retries CBH Write Log Extended 3FH Write Multiple C5H Write Multiple Extended 39H Write Multiple FUA Extended CEH Write Sectors 30H Write Sectors Without Retries 31H Write Sectors Extended 34H 30 Barracuda 7200 11 Serial ATA Product Manual Rev E 4 3 1 Identify Device command The Identify Device command command code EC transfers information about the drive to the host following power up The data is organiz
3. Code in features register S M A R T command DOH S M A R T Read Data D2H S M A R T Enable Disable Attribute Autosave D3H S M A R T Save Attribute Values D4y S M A R T Execute Off line Immediate runs DST D5y S M A R T Read Log Sector DOH S M A R T Write Log Sector S M A R T Enable Operations D94 S M A R T Disable Operations DAH S M A R T Return Status Note If an appropriate code is not written to the Features Register the command is aborted and 0x04 abort is written to the Error register 36 Barracuda 7200 11 Serial Product Manual Rev E 5 0 Seagate Technology support services Online services Internet For information regarding Seagate products and services visit www seagate com Worldwide support is available 24 hours daily by email for your guestions Presales Support Presales Seagate com Technical Support DiscSupport Seagate com Warranty Support http www seagate com www en us support warranty_ amp returns assistance mySeagate my seagate com is the industry s first Web portal designed specifically for OEMs and distributors It provides self service access to critical applications personalized content and the tools that allow our partners to man age their Seagate account functions Submit pricing requests orders and returns through a single password protected Web interface anytime anywhere in the world Spp seagate com spp seagate com supports
4. Seagate C Product Manual Barracuda 7200 11 Serial ATA ST31500341AS ST31000333AS ST3640323AS ST3640623AS ST3320613AS ST3320813AS ST3160813AS 100507013 Rev E December 2008 Revision Rev A Rev B Rev C Rev D Rev E Date 06 17 08 06 25 08 07 15 08 10 17 08 12 12 08 Revision history Sheets affected or comments Initial release 4 and 6 fc 1 3 6 8 11 13 15 17 21 25 26 28 and 30 5 7 9 18 20 and 35 36 22 Copyright 2008 Seagate Technology LLC All rights reserved Printed in U S A Publication number 100507013 Rev E December 2008 Seagate Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and or other countries Barracuda SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and or other countries All other trademarks or registered trademarks are the property of their respective owners When referring to hard drive capacity one gigabyte or GB equals one billion bytes and one terabyte or TB equals one trillion bytes Your computer s operating system may use a different standard of measure ment and report a lower capacity In addition some of the listed capacity is used for formatting and other functions and thus will not be available for data storage Seagate reserves the right to change without notice product offerings or
5. 200 ft to 10 000 ft Altitude nonoperating 60 96 m to 12 192 m below mean sea level max 200 ft to 40 000 ft Operational Shock 70 Gs max at 2 msec Non Operational Shock 300 Gs max at 2 msec 6 Barracuda 7200 11 Serial ATA Product Manual Rev E Drive specification ST3640323AS ST3640623AS Vibration operating 2 22 Hz 0 25 Gs Limited displacement 22 350 Hz 0 50 Gs 350 500 Hz 0 25 Gs Vibration nonoperating 5 22 Hz 2 0 Gs 22 350 Hz 5 0 Gs 350 500 Hz 2 0 Gs Drive acoustics sound power Idle 2 6 bels typical 2 8 bels max Performance Seek 3 0 bels typical 3 2 bels max Quiet Seek 2 7 bels typical 2 9 bels max Nonrecoverable read errors 1 per 1014 bits read Annualized Failure Rate AFR 0 34 Warranty To determine the warranty for a specific drive use a web browser to access the following web page support seagate com customer warranty_validation jsp From this page click on the Verify Your Warranty link You will be asked to provide the drive serial number model number or part number and country of purchase The system will display the warranty information for your drive Contact start stop cycles 50 000 at 25 C 50 rel humidity Supports Hotplug operation per the Yes Serial ATA Revision 2 5 specification One Gbyte equals one billion bytes when referring to hard drive capacity Accessible capacity may vary depending on operating environment and format
6. 82 Command sets supported 364 83 Command sets supported 7C03H 4003H See Word 108 111 note 84 Command sets support extension see note following this table 4003H 0100000000000011 binary 85 Command sets enabled 30XXH 86 Command sets enabled 00014 87 Command sets enable extension 4000 88 Ultra DMA support and current mode see note following this table XX3FH 89 Security erase time 0000H 90 Enhanced security erase time 0000H 92 Master password revision code FFFEH 93 Hardware reset value XXXXH 95 99 ATA reserved 0000 ST31500341AS 2 930 277 168 Total number of user addressable LBA sectors available see Section al a le 100 103 2 1 for related information These words are required for drives that ST3640623AS 1 250 263 728 support the 48 bit addressing feature Maximum value 0000FFFFFFFFFFFFh ST3320613AS 625 142 448 ST3320813AS 625 142 448 ST3160813AS 312 581 808 32 Barracuda 7200 11 Serial ATA Product Manual Rev E Word Description Value 104 107 ATA reserved 0000 108 111 The mandatory value of the world wide name WWN for the drive Each drive will have a unique NOTE This field is valid if word 84 bit 8 is set to 1 indicating 64 bit value WWN support 112 127 ATA reserved 00004 128 Security status 00014 129 159 Seagate reserved XXXXH 160 254 ATA reserved 0000 255 Integrity word xxA5y Note Advanced Power Management APM and Automatic Acoustic Ma
7. drive accepts all commands and returns to Active mode when disc access is necessary 14 Barracuda 7200 11 Serial ATA Product Manual Rev E 2 8 Environmental specifications 2 8 1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive Actual drive case temperature should not exceed 69 C 156 F within the operating ambient conditions Above 1 000 feet 305 meters the maximum temperature is derated linearly to 112 F 44 C at 10 000 feet 3 048 meters Operating 0 to 60 32 to 140 F Nonoperating 40 to 70 C 40 to 158 F 2 8 2 Temperature gradient Operating 20 C per hour 68 F per hour max without condensation Nonoperating 30 C per hour 86 F per hour max 2 8 3 Humidity 2 8 3 1 Relative humidity Operating 9 to 95 noncondensing 30 per hour max Nonoperating 9 to 95 noncondensing 30 per hour max 2 8 3 2 Wet bulb temperature Operating 37 7 99 9 F max Nonoperating 40 C 104 F max 2 8 4 Altitude Operating 60 96 m to 3 048 m 200 ft to 10 000 ft Nonoperating 60 96 m to 12 192 m 200 ft to 40 000 ft 2 8 5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws Shock may be applied in the X Y or Z axis 2 8 5 1 Operating shock These drives comply with th
8. drive monitoring and reporting Supports latching SATA cables and connectors Worldwide Name WWN capability uniquely identifies the drive Barracuda 7200 11 Serial ATA Product Manual Rev E 1 1 1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional parallel ATA interface The primary advantages include Easy installation and configuration with true plug and play connectivity It is not necessary to set any jump ers or other configuration options Thinner and more flexible cabling for improved enclosure airflow and ease of installation Scalability to higher performance levels In addition Serial ATA makes the transition from parallel ATA easy by providing legacy software support Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disc drive in your current system and expect all of your existing applications to work as normal The Serial ATA interface connects each disc drive in a point to point configuration with the Serial ATA host adapter There is no master slave relationship with Serial ATA devices like there is with parallel ATA If two drives are attached on one Serial ATA host adapter the host operating system views the two devices as if they were both masters on two separate ports This essentially means both drives behave as if they are Device 0 master devices Note The host adapter may optionally emulate a master s
9. ACA 19 acceleration 16 acoustics 17 Active 14 Active mode 14 actuator arm 12 AFR 18 Agency certification altitude 15 Ambient temperature 15 ambient temperature 11 12 Annualized Failure Rate 18 Annualized Failure Rate AFR areal density 1 10 ATA commands 29 Australia New Zealand Standard AS NZS3548 1995 19 Australian Communication Authority ACA Australian C Tick 19 Average latency 11 Average seek time 11 B buffer cables connectors 23 cache 11 capacity 10 case temperature 15 CE mark 18 certification 18 Check Power Mode 29 compatibility 18 Conducted noise 14 Conducted RF immunity 17 Configuring the drive 21 connectors 23 Corrosive environment 20 CSA C22 2 950 18 cycles 18 Cylinders 10 D data transfer rates 1 DC power 12 Default logical geometry 10 density 10 Device Configuration Freeze Lock 29 18 18 19 11 Barracuda 7200 11 Serial Product Manual Rev E Device Configuration Identify 29 Device Configuration Restore 29 Device Configuration Set 29 Device Reset 29 dimensions 24 25 disc surface 12 dissipation 13 Download Microcode 29 duty cycle 18 E Electrical fast transient 17 Electromagnetic compatibility 18 Electromagnetic Compatibility EMC 19 Electromagnetic Compatibility control Regulation 19 Electromagnetic Compatibility Directive 89 336 EEC 18 Electromagnetic immunity 17 Electrostatic discharge 17 electrostatic dis
10. Barracuda 7200 11 Serial ATA Product Manual Rev E 11 2 6 Start stop times 1500 GB 1000GB 640GB 3208160 GB Models Models Models Models Power on to Ready typ max sec 12 20 9 16 Power on to Ready typ max sec 2 0 Amp Code Option er 14 20 6 9 Standby to Ready typ max sec 12 20 9 16 6 9 Ready to spindle stop typ max sec 10 20 6 10 2 7 Power specifications The drive receives DC power 5V or 12V through a native SATA power connector See Figure 2 on page 23 2 7 1 Power consumption Power requirements for the drives are listed in the table on page 9 Typical power measurements are based on an average of drives tested under nominal conditions using 5 0V and 12 0V input voltage at 25 C ambient temperature Spinup power Spinup power is measured from the time of power on to the time that the drive spindle reaches operating speed Seek mode During seek mode the read write actuator arm moves toward a specific position on the disc surface and does not execute a read or write operation Servo electronics are active Seek mode power represents the worst case power consumption using only random seeks with read or write latency time This mode is not typical and is provided for worst case information Read write power and current Read write power is measured with the heads on track based on a 16 sector write followed by a 32 msec delay then a 16 sector read followed by a 32 msec
11. Electromagnetic immunity 17 FA 18 2 11 1 Annualized Failure Rate AFR and Mean Time Between Failures MTBF 18 2 12 Agency certification r Aesi reei e Enr hh hh 18 2 12 1 Safety certification a na aaa a aaa Ka NA E e E nenn 18 2 12 2 Electromagnetic 18 2 12 39 FEC Verification u 2 20 van pak an al ad RG ZA ne 19 2 13 Environmental protection een 20 2 13 1 European Union Restriction of Hazardous Substances RoHS Directive 20 2 14 Corrosive environment 20 Configuring and mounting the drive 000 rennen en nennen 21 3 1 Handling and static discharge 5 21 3 2 Configuririgith drive iios ee a eme dn a de ale AREA ET 22 3 3 Serial ATA cables and connectors 23 3 4 Drive MONING xoci de Saa RA nr 24 Serial ATA SATA interface 27 4 1 Hot Plug compatibility nennen 27 4 2 Serial ATA device plug connector pin definitions 28 4 3 Supported ATA commands nn n 29 4 3 1 Identify Device 31 4 3 2 Set Features 35 4 3 3 SMART com
12. Our data recovery ser vices labs are currently located throughout the world Additional information including an online reguest form and data loss prevention resources is available at http services seagate com index aspx Authorized Service Centers Seagate Service Centers are available on a global basis for the return of defective products See www sea gate com for the service center near you USA Canada Latin America support services For an extensive list of telephone numbers to technical support presales and warranty service in USA Canada Latin America including business hours go to the Contact Us page on www seagate com Global Customer Support Presales Technical and Warranty Support Call Center Toll free Direct dial USA Canada and Mexico 1 800 SEAGATE 1 405 324 4700 Data Recovery Services Call Center Toll free Direct dial FAX USA Canada 1 800 475 0143 1 905 474 2162 1 800 475 0158 and Mexico 1 905 474 2459 Europe the Middle East and Africa Support Services For an extensive list of telephone numbers to technical support presales and warranty service in Europe the Middle East and Africa go to the Contact Us page on www seagate com Asia Pacific Support Services For an extensive list of telephone numbers to technical support presales and warranty service in Asia Pacific go to the Contact Us page on www seagate com 38 Barracuda 7200 11 Serial ATA Product Manual Rev E Index A
13. delay Operating power and current Operating power is measured using 40 percent random seeks 40 percent read write mode 1 write for each 10 reads and 20 percent drive idle mode Idle mode power Idle mode power is measured with the drive up to speed with servo electronics active and with the heads in a random track location Standby mode During Standby mode the drive accepts commands but the drive is not spinning and the servo and read write electronics are in power down mode 12 Barracuda 7200 11 Serial ATA Product Manual Rev E Table 4 DC power reguirements Power dissipation 4 disc values shown Avg watts 25 Avg 5V typ amps Avg 12V typ amps Spinup 2 8 peak Idle 8 30 0 330 0 530 Idle with offline activity 8 30 0 330 0 530 Operating 40 r w 4096 seek 20 inop 10 80 0 700 0 610 Seeking random 20 idle 10 10 0 430 0 663 Standby 0 90 0 130 0 021 Sleep 0 90 0 130 0 021 During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels Table 5 DC power requirements Power dissipation 1 disc values shown Avg watts 25 C Avg 5V typ amps Avg 12V typ amps Spinup 2 0 peak Idle 5 00 0 250 0 240 Idle with offline activity 5 00 0 250 0 240 Operating 40 r w 40 seek 20 inop 9 00 0 648 0 480 Seeking rand
14. mode The drive is in Active mode during the read write and seek operations Idle mode The buffer remains enabled and the drive accepts all commands and returns to Active mode any time disc access is necessary Standby mode The drive enters Standby mode when the host sends a Standby Immediate command If the host has set the standby timer the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time The standby timer delay is established using a Standby or Idle command In Standby mode the drive buffer is enabled the heads are parked and the spindle is at rest The drive accepts all commands and returns to Active mode any time disc access is necessary Sleep mode The drive enters Sleep mode after receiving a Sleep command from the host In Sleep mode the drive buf fer is disabled the heads are parked and the spindle is at rest The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host After receiving a reset the drive exits Sleep mode and enters Standby mode with all current translation parameters intact Idle and Standby timers Each time the drive performs an Active function read write or seek the standby timer is reinitialized and begins counting down from its specified delay times to zero If the standby timer reaches zero before any drive activity is required the drive makes a transition to Standby mode In both Idle and Standby mode the
15. models 320 GB models 160 GB models Cache buffer ST31500341AS ST31000333AS and ST3640323AS ST3640623AS and ST3320613AS ST3320813AS and ST3160813AS 2 5 Seek time 720 grams 1 587 Ibs 677 grams 1 493 Ibs 543 grams 1 199 Ibs 405 grams 0 893 Ibs 390 grams 0 860 Ibs 32 Mbytes 32 768 kbytes 16 Mbytes 16 384 kbytes 8 Mbytes 8 192 kbytes Seek measurements are taken with nominal power at 25 ambient temperature All times are measured using drive diagnostics The specifications in the table below are defined as follows Track to track seek time is an average of all possible single track seeks in both directions Average seek time is a true statistical random average of at least 5 000 measurements of seeks between random tracks less overhead Typical seek times msec Read Write Track to track 0 8 1 0 Average 1500 1000 and 640 GB models 8 5 10 0 Average 320 and 160 GB models 11 0 12 0 Average latency 4 16 Measured in performance mode Measured in quiet mode Note These drives are designed to consistently meet the seek times represented in this manual Physical seeks regardless of mode such as track to track and average are expected to meet the noted values However due to the manner in which these drives are formatted benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications
16. power connectors Table 8 Serial ATA connector pin definitions Segment Pin Function Definition 51 Ground 2nd mate S2 A Differential signal pair A from Phy 53 54 Ground 2nd mate S5 B Differential signal pair B from Phy S6 B Signal S7 Ground 2nd mate Key and spacing separate signal and power segments 1 V33 3 3V power P2 V33 3 3V power P3 V33 3 3V power pre charge 2nd mate P4 Ground 1st mate P5 Ground 2nd mate P6 Ground 2nd mate P7 Vs 5V power pre charge 2nd mate Power P8 Vs 5V power P9 Vs 5V power P10 Ground 2nd mate P11 Ground or LED signal If grounded drive does not use deferred spin P12 Ground 1st mate P13 V12 12V power pre charge 2nd mate P14 12V power P15 12V power Notes 1 All pins are in a single row with a 1 27 mm 0 050 pitch 2 The comments on the mating seguence apply to the case of backplane blindmate connector only In this case the mating seguences are the ground pins P4 and P12 the pre charge power pins and the other ground pins the signal pins and the rest of the power pins 3 There are three power pins for each voltage One pin from each voltage is used for pre charge when installed in a blind mate backplane configuration 4 All used voltage pins V must be terminated 28 Barracuda 7200 11 Serial ATA Product Manual Rev E 4 3 Supported ATA commands The following table lists
17. specifications 1 0 2 0 3 0 4 0 5 0 Contents Introduction Em 1 1 1 About the Serial ATA interface _ 2 Drive specifications oen exe Neu wang en an ee 3 2 1 Formatted capacity na ea y O s qa a eee ee 10 2 1 1 BA 10 2 2 Default logical geometry 10 2 3 Recording and interface technology 10 2 4 Physical characteristics Ka aa anuti ioi naa ab BA ag a a aan a eee 11 2 5 Seek time A ESTNE m e Ede a 11 2 6 Start Stop times ee hae a Ui du ee a T 12 2 7 Power specifications u dssdo a cun aet GAS alea a m RA U M 12 2 7 1 Power 12 2 7 2 Conducted noise 14 2 1 3 Voltage tolerance eee he 14 2 7 4 Power management 14 2 8 Environmental 5 5 15 2 8 1 Ambient temperature 15 2 8 2 Temperature gradient 00 rh 15 2 8 3 WO 15 2 8 4 15 2 8 5 SHOCK dedere La Ve A MIU ext 15 2 8 6 Vibration aee cus evt D Ed e Beier E eite ue Dos 16 2 9 17 2 9 1 Test for Prominent Discrete Tones PDTs 17 2 10
18. temperatures of 25 Operation at temperatures outside the specifica tions in Section 2 8 may increase the product AFR decrease MTBF AFR and MTBF are population statistics that are not relevant to individual units AFR and MTBF specifications are based on the following assumptions for desktop personal computer environ ments 2400 power on hours per year 10 000 average motor start stop cycles per year Operations at nominal voltages Temperatures outside the specifications in Section 2 8 may reduce the product reliability Normal I O duty cycle for desktop personal computers Operation at excessive I O duty cycle may degrade product reliability The desktop personal computer environment of power on hours temperature and IJO duty cycle affect the product AFR and MTBF The AFR and MTBF will be degraded if used in an enterprise application Nonrecoverable read errors 1 per 101 bits read max Annualized Failure Rate AFR 0 3496 nominal power 25 C ambient temperature Contact start stop cycles 50 000 cycles at nominal voltage and temperature with 60 cycles per hour and a 50 duty cycle Warranty To determine the warranty for a specific drive use a web browser to access the following web page support seagate com customer warranty validation jsp From this page click on the Verify Your Warranty link You will be asked to provide the drive serial number model number or part number and country
19. 00 00345 4 Barracuda 7200 11 Serial ATA Product Manual Rev E 19 2 13 Environmental protection Seagate designs its products to meet environmental protection reguirements worldwide including regulations restricting certain chemical substances 2 13 1 European Union Restriction of Hazardous Substances RoHS Directive A new law the European Union Restriction of Hazardous Substances RoHS Directive restricts the presence of chemical substances including Lead Cadmium Mercury Hexavalent Chromium PBB and PBDE in elec tronic products effective July 2006 This drive is manufactured with components and materials that comply with tne RoHS Directive 2 132 This product has an Environmental Protection Use Period EPUP of 20 years The following able contains information mandated by Chinas Marking Reguirements for Control of Pollution Caused by Electronic Information Products Standard Ai AER EPU Toxic or Hazardous Substances or Elements B SUB 3 h 8 stor Hexavalent Polybrominated Polybrominated Biphenyl Diphenyl Ether EURE EN tH O indicates the hazardous and toxic substance content of the part at the homogenous material level is ower than the threshold defined by the China RoHS MCV Standard
20. 1 point to point 2 22 Power consumption 12 power consumption 12 power dissipation 13 Power modes 14 Power specifications 12 Power management modes 14 Power on to Ready 12 power on hours 18 precautions 21 printed circuit board 21 programmable power management 14 prominent discrete tone 17 Q quick reference 3 R Radiated RF immunity 17 radio and television interference 19 radio frequency RF 17 random seeks 12 Read Buffer 29 Read DMA 29 Read DMA Extended 29 Read DMA without Retries 29 read errors 18 Read Log Ext 29 Read Multiple 29 Read Multiple Extended 29 Read Native Max Address 29 Read Native Max Address Extended 29 Read Sectors 29 Read Sectors Extended 29 Read Sectors Without Retries 29 Read Verify Sectors 29 Read Verify Sectors Extended 29 Read Verify Sectors Without Retries 29 read write actuator arm 12 Read write heads 10 Read write power 12 Recalibrate 29 recording density 10 recording method 10 Recording technology 10 relative humidity 15 Reliability 18 RF 17 Barracuda 7200 11 Serial Product Manual Rev E RMS read write current 14 start stop cycles 18 RoHS 20 static discharge 21 RRL 19 subassembly 19 support services 37 S Surge immunity 17 S M A R T Disable Operations 30 T S M A R T Enable Operations 30 S M A R T Enable Disable Autosave 30 technical support services 37 S M A R T Execute Offline 30 temperature 11 15 S M A R T implementation 29 temperature gr
21. 12 Default sectors per track 63 Default read write heads 16 Default cylinders 16 383 Recording density 1250 kbits in max Track density 190 ktracks in avg Areal density 219 Gbits in avg Spindle speed 7 200 RPM Internal data transfer rate 1460 Mbits sec max Sustained data transfer rate OD 115 Mbytes sec max VO data transfer rate 300 Mbytes sec max ATA data transfer modes supported PIO modes 0 4 Multiword DMA modes 0 2 Ultra DMA modes 0 6 Cache buffer 32 Mbytes 16 Mbytes Height max 26 1 mm 1 028 inches Width max 101 6 mm 4 000 inches 0 010 inches Length max 146 99 mm 5 787 inches Weight typical 543 grams 1 199 Ib Average latency 4 16 msec Power on to ready 20 sec max Standby to ready 14 sec max Track to track seek time lt 0 8 msec typical read 1 0 msec typical write Average seek read lt 8 5 msec typical Average seek write lt 10 0 msec typical Startup current typical 12V peak 2 8 amps Voltage tolerance including noise 5V 10 7 5 12V 10 7 5 Ambient temperature 0 to 60 C operating 40 to 70 C nonoperating Temperature gradient 20 C per hour max operating 30 C per hour max nonoperating Relative humidity 5 to 95 operating 5 to 95 nonoperating Relative humidity gradient 30 per hour max Wet bulb temperature 37 7 C max operating 40 0 C max nonoperating Altitude operating 60 96 m to 3 048 m
22. Average seek read lt 11 0 msec typical Average seek write lt 12 0 msec typical Startup current typical 12V peak 2 0 amps Voltage tolerance including noise 5V 5 12V 10 Ambient temperature 0 to 60 operating 40 to 70 nonoperating Temperature gradient 20 per hour max operating 30 per hour max nonoperating Relative humidity 5 to 95 operating 5 to 95 nonoperating Relative humidity gradient 30 per hour max Wet bulb temperature 37 7 max operating 40 0 max nonoperating Altitude operating 60 96 m to 3 048 m 200 ft to 10 000 ft Altitude nonoperating 60 96 m to 12 192 m below mean sea level max 200 ft to 40 000 ft Operational Shock 70 Gs max at 2 msec Non Operational Shock 350 Gs max at 2 msec 8 Barracuda 7200 11 Serial ATA Product Manual Rev E Drive specification Vibration operating ST3320613AS ST3320813AS ST3160813AS 2 22 Hz 0 25 Gs Limited displacement 22 350 Hz 0 50 Gs 350 500 Hz 0 25 Gs Vibration nonoperating 9 22 Hz 2 0 Gs 22 350 Hz 5 0 Gs 350 500 Hz 2 0 Gs Drive acoustics sound power Idle Performance and Quiet Seek Nonrecoverable read errors 2 3 bels typical 2 5 bels max 2 6 bels typical 2 8 bels max 1 per 1014 bits read Annualized Failure Rate AFR 0 34 Warranty To determine the warranty for a specific drive use a web browser to access the following web page supp
23. FCC rules Operation with noncertified assemblies is likely to result in interference to radio and television reception Radio and television interference This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer s instructions may cause interference to radio and television reception This equipment is designed to provide reasonable protection against such interference in a residential installation However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television which can be determined by turning the equipment on and off you are encouraged to try one or more of the following corrective measures Reorient the receiving antenna Move the device to one side or the other of the radio or TV Move the device farther away from the radio or TV Plug the computer into a different outlet so that the receiver and computer are on different branch outlets If necessary you should consult your dealer or an experienced radio television technician for additional suggestions You may find helpful the following booklet prepared by the Federal Communications Commission How to Identify and Resolve Radio Television Interference Problems This booklet is available from the Super intendent of Documents U S Government Printing Office Washington DC 20402 Refer to publication num ber 004 0
24. ISO 389 7 to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA 74 standards 2 10 Electromagnetic immunity When properly installed in a representative host system the drive operates without errors or degradation in performance when subjected to the radio frequency RF environments defined in the following table Table 7 Radio frequency environments Test Description Performance level Reference standard Electrostatic Contact HCP VCP 4 KV Air 8 kV B EN 61000 4 2 95 discharge Radiated RF 80 to 1 000 MHz 3 V m A EN 61000 4 3 96 immunity 80 AM with 1 kHz sine ENV 50204 95 900 MHz 3 V m 50 pulse modulation 200 Hz Electrical fast 1 kV on AC mains 0 5 kV on external IJO B EN 61000 4 4 95 transient Surge immunity 1 kV differential 2 kV common AC mains B EN 61000 4 5 95 Conducted RF 150 kHz to 80 MHz 3 Vrms 8096 AM with 1 kHz sine A EN 61000 4 6 97 immunity Voltage dips 096 open 5 seconds C EN 61000 4 11 94 interrupts 096 short 5 seconds C 4096 0 10 seconds C 7096 0 01 seconds B Barracuda 7200 11 Serial ATA Product Manual Rev E 17 2 11 Reliability 2 11 1 Annualized Failure Rate AFR and Mean Time Between Failures MTBF The product shall achieve an Annualized Failure Rate AFR of 0 34 MTBF of 0 7 million hours when oper ated in an environment of ambient air
25. Seagate resellers with product information program benefits and sales tools You may register for customized communications that are not available on the web These communications contain product launch EOL pricing promotions and other channel related information To learn more about the ben efits or to register go to spp seagate com any time from anywhere in the world Global Customer Support Presales Support Our Presales Support staff can help you determine which Seagate products are best suited for your specific application or computer system as well as product availability and compatibility Technical Support Seagate technical support is available to assist you online at support seagate com or through one of our call centers Have your system configuration information and your ST model product number available Barracuda 7200 11 Serial ATA Product Manual Rev E 37 Customer Service Operations Warranty Service Seagate offers worldwide customer support for Seagate products Seagate distributors OEMs and other direct customers should contact their Seagate Customer Service Operations CSO representative for warranty related issues Resellers or end users of drive products should contact their place of purchase or Seagate war ranty service for assistance Have your serial number and model or part number available Data Recovery Services Seagate offers data recovery services for all formats and all brands of storage media
26. Serial standard commands that the drive supports For a detailed description of the commands refer to the Serial International Organization Serial Revision 2 6 http www sata io org See S M A R T commands on page 36 for details and subcommands used in the S M A R T implementation Table 9 Supported ATA commands Command name Command code in hex Check Power Mode E54 Device Configuration Freeze Lock 1 Device Configuration Identify C2H Device Configuration Restore B1H COH Device Configuration Set C3H Device Reset 08H Download Microcode 92H Execute Device Diagnostics 90H Flush Cache E7H Flush Cache Extended EAH Format Track 504 Identify Device ECy Idle E3H Idle Immediate E14 Initialize Device Parameters 91H Read Buffer E44 Read DMA C8y Read DMA Extended 25H Read DMA Without Retries C9u Read Log Ext 2FH Read Multiple CAy Read Multiple Extended 294 Read Native Max Address F8y Read Native Max Address Extended 27H Read Sectors 204 Read Sectors Extended 241 Read Sectors Without Retries 21H Read Verify Sectors 40H Read Verify Sectors Extended 424 Read Verify Sectors Without Retries 414 Recalibrate 10H Security Disable Password F6y Security Erase Prepare F34 Barracuda 7200 11 Serial ATA Product Manual Rev E 29 Command name Command code in hex
27. XXXH 95 Number of current logical heads XXXXH 56 Number of current logical sectors per logical track XXXXH 57 58 Current capacity in sectors XXXXH 59 Number of sectors transferred during a Read Multiple or Write Multiple 20004 command Barracuda 7200 11 Serial ATA Product Manual Rev E 31 Word Description Value Total number of user addressable LBA sectors available see Section 2 1 for related information 60 61 268435455 sectors 137 Gbytes Drives with capacities over 137 OFFFFFFFh Gbytes will have OFFFFFFFh in this field and the actual number of user addressable LBAs specified in words 100 103 This is required for drives that support the 48 bit addressing feature 62 Retired 0000 63 obi DMA active and modes supported see note following this xx074 64 Advanced PIO modes supported modes 3 and 4 supported 0003 65 Minimum multiword DMA transfer cycle time per word 120 nsec 00784 66 multiword transfer cycle time per word 120 0078 67 Minimum PIO cycle time without IORDY flow control 240 nsec 00F0H 68 Minimum PIO cycle time with IORDY flow control 120 nsec 00784 69 74 ATA reserved 00004 75 Queue depth 00004 76 Serial ATA capabilities XXXXH 77 Reserved for future Serial ATA definition XXXXH 78 Serial ATA features supported XXXXH 79 Serial ATA features enabled XXXXH 80 Major version number 003EH 81 Minor version number 0000H
28. adient 15 S M A R T Read Attribute Thresholds 30 timer 14 S M A R T Read Data 30 timers 14 S M A R T Read Log Sector 30 track density 10 S M A R T Return Status 30 Track to track 11 S M A R T Save Attribute Values 30 Track to track seek time 11 S M A R T Write Log sector 30 tunneling magnetoresistive TMR recording heads 1 Safety certification 18 SATA 27 U Screws I UL 1950 18 sectors 10 Sectors per track 10 V Security Disable Password 29 Security Erase Prepare 29 Vibration 16 Security Erase Unit 30 voltage 12 Security Freeze 30 Voltage dips interrupts 17 Security Set Password 30 Voltage tolerance 14 Security Unlock 30 Seek 30 W seek mode 12 Seek mode power 12 Warranty 18 weight 11 S wet bulb temperature 15 Serial ATA SATA interface 27 D 30 serial ATA ports 2 Write DMA 30 Servo electronics 12 servo electronics 12 Set Features 30 Set Max Address 30 Set Max Address Extended 30 Set Multiple Mode 30 Shock 15 single track seeks 11 Sleep 13 14 30 Sleep mode 14 sound 17 Specification summary table 3 spindle speed 10 Spinup 13 Spinup power 12 Standby 13 14 30 Standby Immediate 30 Standby mode 12 14 standby timer 14 Standby to Ready 12 Start stop times 12 Write DMA Extended 30 Write DMA FUA Extended 30 Write DMA Without Retries 30 Write Log Extended 30 Write Multiple 30 Write Multiple Extended 30 Write Multiple FUA Extended 30 Write Sectors 30 Write Sectors Extended 30 Write Sectors Without Ret
29. al 2 8 bels max 2 7 bels max 3 0 bels typical 2 9 bels typical 3 2 bels max 3 1 bels max 2 7 bels typical 2 9 bels max Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate AFR 0 34 Warranty To determine the warranty for a specific drive use a web browser to access the following web page support seagate com customer warranty_validation jsp From this page click on the Verify Your Warranty link You will be asked to provide the drive serial number model number or part number and country of purchase The system will display the warranty information for your drive Contact start stop cycles 50 000 at 25 C 50 rel humidity Supports Hotplug operation per the Serial ATA Revision 2 5 specification Yes One Gbyte equals one billion bytes when referring to hard drive capacity Accessible capacity may vary depending on operating environment and formatting During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels Barracuda 7200 11 Serial Product Manual Rev E 5 Table 2 Drive specifications summary for 640 Gbyte models Drive specification ST3640323AS ST3640623AS Formatted capacity 512 bytes sector 640 Gbytes Guaranteed sectors 1 250 263 728 Heads 4 Discs 2 Bytes per sector 5
30. ase temperature measurement location Figure 3 Mounting dimensions 1500 1000 and 640 GB models 24 Barracuda 7200 11 Serial ATA Product Manual Rev E 1 126 050 OF DRIVE 814 d OF CONN DATUM B 4 010 MAX TOP OF LABEL SSS 1 122 020 3 SATA 3X 6 32 UNC 2B 3 MIN THREAD DEPTH 3X 250 010 BOTH SIDES 2x 125 5 4X 6 32 UNC 2B 3 MIN THREAD DEPTH DETAIL A 15 MAX FASTENER 020 MIN 5 SECTION B B Figure 4 Mounting dimensions 320 and 160 GB models Barracuda 7200 11 Serial ATA Product Manual Rev E 25 26 Barracuda 7200 11 Serial Product Manual Rev E 4 0 Serial ATA SATA interface These drives use the industry standard Serial ATA interface that supports FIS data transfers It supports ATA programmed input output PIO modes 0 4 multiword DMA modes 0 2 and Ultra DMA modes 0 6 For detailed information about the Serial ATA interface refer to the Serial ATA High Speed Serialized AT Attachment specification 4 1 Hot Plug compatibility Barracuda 7200 11 Serial ATA drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA Revision 2 5 specification This specification can be downloaded from www serialata org Barracuda 7200 11 Serial Product Manual Rev E 27 4 2 Serial ATA device plug connector pin definitions Table 8 summarizes the signals on the Serial ATA interface and
31. charge ESD 21 EN 55022 Class B 18 EN 55024 18 EN 60950 18 enclosures 19 Environmental specifications 15 EPRML 1 error correction algorithms 1 errors 18 ESD 21 EU 18 EU RoHS directive 20 European Union EU requirements 18 Execute Device Diagnostics 29 F FCC verification 19 features 1 Flush Cache 29 Flush Cache Extended 29 Format Track 29 Formatted capacity 10 G geometry 10 Gs 16 guaranteed sectors 10 H Handling precautions 21 heads 10 height 11 humidity 15 39 I O data transfer rate 10 MO duty cycle 18 Identify Device 29 Identify Device command 31 Ide 14 29 Idle Immediate 29 Idle mode 12 14 IEC950 18 Information Technology Equipment ITE 18 Initialize Device Parameters 29 Input noise ripple 14 input voltage 12 interface 10 27 interference 19 internal data transfer rate OD 10 is 11 ISO document 7779 17 ITE 18 K Korea Ministry of Information and Communication MIC 19 Korean RRL 19 L latency 11 latency time 12 LBA mode 10 length 11 logical geometry 10 M maintenance 18 master slave 2 maximum temperature 15 Mean Time Between Failures 18 MIC 19 mounting 24 mounting screws 15 mounting the drive 21 MTBF 18 N noise 14 nominal power 11 Nonoperating shock 16 Nonoperating vibration 16 Nonrecoverable read errors 18 O operating 13 40 Operating power 12 Operating shock 15 Operating vibration 16 P Physical characteristics 1
32. ctive 9 Ultra DMA mode 1 is currently active 10 Ultra DMA mode 2 is currently active 11 Ultra DMA mode 3 is currently active 12 Ultra DMA mode 4 is currently active 13 Ultra mode 5 is currently active 14 Ultra DMA mode 6 is currently active 34 Barracuda 7200 11 Serial ATA Product Manual Rev E 4 3 2 Set Features command This command controls the implementation of various features that the drive supports When the drive receives this command it sets BSY checks the contents of the Features register clears BSY and generates an inter rupt If the value in the register does not represent a feature that the drive supports the command is aborted Power on default has the read look ahead and write caching features enabled The acceptable values for the Features register are defined as follows Table 10 Set Features command values 024 Enable write cache default 034 Set transfer mode based on value in Sector Count register Sector Count register values 004 01 4 084 094 OA OBH 20 21H 224 404 414 424 434 4411 454 464 Set PIO mode to default PIO mode 2 Set PIO mode to default and disable IORDY PIO mode 2 PIO mode 0 PIO mode 1 PIO mode 2 PIO mode 3 PIO mode 4 default Multiword DMA mode 0 Multiword DMA mode 1 Multiword DMA mode 2 Ultra DMA mode 0 Ultra DMA mode 1 Ultra DMA mode 2 Ultra DMA mode 3 Ultra DMA mode 4 Ultra DMA mode 5 Ultra DMA mode 6 104 Enab
33. d meet the Electromagnetic Compatibility EMC Framework reguirements of the Radio Research Laboratory RRL Ministry of Information and Communication Republic of Korea These drives have been tested and comply with the Electromagnetic Interference Electromagnetic Susceptibility EMI EMS for Class B products Drives are tested in a representative end user system by a Korean recognized lab Family name Barracuda 7200 11 e Certificate number 1500 GB STX 720011 B 1000 GB STX 720011 B 640GB STX 720011 B 320 GB STX 720011 B 160 GB STX 720011 B Australian C Tick N176 If these models have the C Tick marking they comply with the Australia New Zealand Standard AS NZS3548 1995 and meet the Electromagnetic Compatibility EMC Framework requirements of the Australian Communication Authority ACA 2 12 3 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure not attached as an external device As such each drive is considered to be a subassembly even when it is individually marketed to the customer As a subassembly no Federal Communications Commission verification or certification of the device is required Seagate has tested this device in enclosures as described above to ensure that the total assembly enclosure disc drive motherboard power supply etc does comply with the limits for a Class B computing device pursuant to Subpart J Part 15 of the
34. e performance levels specified in this document when subjected to a maximum operating shock of 70 Gs based on half sine shock pulses of 2 msec Shocks should not be repeated more than two times per second Barracuda 7200 11 Serial Product Manual Rev E 15 2 8 5 2 Nonoperating shock 1500 1000 and 640 GB models The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subseguently put into operation is 300 Gs based on a nonrepetitive half sine shock pulse of 2 msec duration 320 and 160 GB models The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subseguently put into operation is 350 Gs based on a nonrepetitive half sine shock pulse of 2 msec duration 2 8 6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws Vibration may be applied in the X Y or Z axis 2 8 6 1 Operating vibration The maximum vibration levels that the drive may experience while meeting the performance standards speci fied in this document are specified below 2 22 Hz 0 25 Gs Limited displacement 22 350 Hz 0 50 Gs 350 500 Hz 0 25 Gs 2 8 6 2 Nonoperating vibration The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance w
35. ed as a single 512 byte block of data whose contents are shown in Table 9 on page 29 All reserved bits or words should be set to zero Parameters listed with an x are drive specific or vary with the state of the drive See Section 2 0 on page 3 for default parameter settings The following commands contain drive specific features that may not be included in the Serial specifica tion Word Description Value Configuration information Bit 15 0 ATA 1 0 Bit 7 removable media 0C5Ay Bit 6 removable controller Bit 0 reserved 1 Number of logical cylinders 16 383 2 ATA reserved 00004 3 Number of logical heads 16 4 Retired 0000 5 Retired 0000 6 Number of logical sectors per logical track 63 003FH 7 9 Retired 00004 10 19 Serial number 20 ASCII characters 0000 none ASCII 20 Retired 0000 21 Retired 0400 22 Obsolete 0000 23 26 SET revision 8 ASCII character string padded with blanks to end 27 46 Drive model number 40 ASCII characters padded with blanks to end of string 47 Bits 7 0 Maximum sectors per interrupt on Read multiple and Write 8010 multiple 16 H 48 Reserved 0000 49 Standard Standby timer IORDY supported and may be disabled 2F00H 50 ATA reserved 0000H 51 PIO data transfer cycle timing mode 0200H 52 Retired 02004 53 Words 54 58 64 70 and 88 are valid 00074 54 Number of current logical cylinders X
36. hen subsequently put into operation are specified below 5 22 Hz 2 0 Gs limited displacement 22 350 Hz 5 0 Gs 350 500 Hz 2 0 Gs 16 Barracuda 7200 11 Serial ATA Product Manual Rev E 2 9 Acoustics Drive acoustics are measured as overall A weighted acoustic sound power levels no pure tones All mea surements are consistent with ISO document 7779 Sound power measurements are taken under essentially free field conditions over a reflecting plane For all tests the drive is oriented with the cover facing upward Note For seek mode tests the drive is placed in seek mode only The number of seeks per second is defined by the following eguation Number of seeks per second 0 4 average latency average access time Table 6 Fluid Dynamic Bearing FDB motor acoustics Idle Performance Seek Quiet Seek 1800 GB model 28 bels max 3 2 bels max 2 9 bels max 1000 and 640 GB models 2 7 bels max 3 1 bels max 320 and 160 GB models 25 bels max 2 8 bels max 2 8 bels max During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels 2 9 1 Test for Prominent Discrete Tones PDTs Seagate follows the ECMA 74 standards for measurement and identification of PDTs An exception to this process is the use of the absolute threshold of hearing Seagate uses this threshold curve originated in
37. lave environment to host software where two devices on separate Serial ATA ports are represented to host software as a Device 0 master and Device 1 slave accessed at the same set of host bus addresses A host adapter that emulates a master slave environment manages two sets of shadow registers This is not a typical Serial ATA environment The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward compatibility with existing host systems and software The Command and Control Block registers PIO and DMA data transfers resets and interrupts are all emulated The Serial ATA host adapter contains a set of registers that shadow the contents of the traditional device regis ters referred to as the Shadow Register Block All Serial ATA devices behave like Device 0 devices For addi tional information about how Serial ATA emulates parallel ATA refer to the Serial ATA International Organization Serial ATA Revision 2 6 The specification can be downloaded from www sata io org 2 Barracuda 7200 11 Serial ATA Product Manual Rev E 2 0 Drive specifications Unless otherwise noted all specifications are measured under ambient conditions at 25 and nominal power For convenience the phrases the drive and this drive are used throughout this manual to indicate the following drive models ST31500341AS ST31000333AS ST3640323AS ST3640623AS ST3320613AS ST3320813AS ST3160813AS Specifica
38. le use of SATA features 554 Disable read look ahead read cache feature 824 Disable write cache 90H Disable use of SATA features AAy Enable read look ahead read cache feature default F 14 Report full capacity available Note At power on or after a hardware or software reset the default values of the features are as indi cated above Barracuda 7200 11 Serial Product Manual Rev E 35 4 3 3 S M A R T commands S M A R T provides near term failure prediction for disc drives When S M A R T is enabled the drive moni tors predetermined drive attributes that are susceptible to degradation over time If self monitoring determines that a failure is likely S M A R T makes a status report available to the host Not all failures are predictable S M A R T predictability is limited to the attributes the drive can monitor For more information on S M A R T commands and implementation see the Draft ATA 5 Standard SeaTools diagnostic software activates a built in drive self test DST S M A R T command for D4H that elimi nates unnecessary drive returns The diagnostic software ships with all new drives and is also available at http seatools seagate com This drive is shipped with S M A R T features disabled You must have a recent BIOS or software package that supports S M A R T to enable this feature The table below shows the S M A R T command codes that the drive uses Table 11 S M A R T commands
39. miands zuo wann are ea 36 Seagate Technology support 37 Barracuda 7200 11 Serial ATA Product Manual Rev E Barracuda 7200 11 Serial ATA Product Manual Rev E Figure 1 Figure 2 Figure 3 Figure 4 List of Figures Serial ATA connectors Attaching SATA Cabling s up sys Ba b a sn re DE RAT READERS ER 23 Mounting dimensions 1500 1000 and 640 GB models Mounting dimensions 320 and 160 GB models Barracuda 7200 11 Serial ATA Product Manual Rev E 1 0 Introduction This manual describes the functional mechanical and interface specifications for the following Seagate Barracuda 7200 11 Serial ATA model drives ST31500341AS ST31000333AS ST3640323AS ST3640623AS ST3320613AS ST3320813AS ST3160813AS These drives provide the following key features 7 200 RPM spindle speed High instantaneous burst data transfer rates up to 300 Mbytes per second Perpendicular recording Tunneling Magnetoresistive TMR recording heads and EPRML technology for increased areal density State of the art cache and on the fly error correction algorithms Native Command Queueing with command ordering to increase performance in demanding applications Full track multiple sector transfer capability without local processor intervention Quiet operation SeaTools diagnostic software performs a drive self test that eliminates unnecessary drive returns Support for S M A R T
40. nagement AAM features are not supported Note See the bit descriptions below for words 63 84 and 88 of the Identify Drive data Description if bit is set to 1 Bit Word 63 0 Multiword DMA mode 0 is supported 1 Multiword DMA mode 1 is supported 2 Multiword DMA mode 2 is supported 8 Multiword DMA mode 0 is currently active 9 Multiword DMA mode 1 is currently active 10 Multiword DMA mode 2 is currently active Bit Word 84 0 SMART error loggin is supported 1 SMART self test is supported 2 Media serial number is supported 3 Media Card Pass Through Command feature set is supported 4 Streaming feature set is supported 5 GPL feature set is supported 6 WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported 7 WRITE DMA QUEUED FUA EXT command is supported 8 64 bit World Wide Name is supported 9 10 Obsolete 11 12 Reserved for TLC 13 IDLE IMMEDIATE command with IUNLOAD faeture is supported 14 Shall be set to 1 15 Shall be cleared to 0 Barracuda 7200 11 Serial Product Manual Rev E 33 Bit Word 88 Ultra DMA mode 0 is supported Ultra DMA mode 1 is supported 2 Ultra DMA mode 2 is supported 3 Ultra DMA mode 3 is supported 4 Ultra DMA mode 4 is supported 5 Ultra mode 5 is supported 6 Ultra DMA mode 6 is supported 8 Ultra DMA mode 0 is currently a
41. of purchase The system will display the warranty information for your drive Preventive maintenance None required 2 12 Agency certification 2 12 1 Safety certification The drives are recognized in accordance with UL 1950 and CSA C22 950 and meet all applicable sections of IEC950 and EN 60950 2 12 2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union EU requirements specified in the Elec tromagnetic Compatibility Directive 89 336 EEC Testing is performed to the levels specified by the product standards for Information Technology Equipment ITE Emission levels are defined by EN 55022 Class B and the immunity levels are defined by EN 55024 Drives are tested in representative end user systems Although CE marked Seagate drives comply with the directives when used in the test systems we cannot guarantee that all systems will comply with the directives The drive is designed for operation inside a properly designed enclosure with properly shielded I O cable if necessary and terminators on all unused I O ports Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products 18 Barracuda 7200 11 Serial ATA Product Manual Rev E Korean RRL If these drives have the Korea Ministry of Information and Communication MIC logo they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation an
42. om 20 idle 8 00 0 293 0 470 Standby 1 0 0 15 0 015 Sleep 1 0 0 15 0 015 During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels Barracuda 7200 11 Serial ATA Product Manual Rev E 13 2 7 2 Conducted noise Input noise ripple is measured at the host system power supply across an eguivalent 80 ohm resistive load on the 12 volt line or an equivalent 15 ohm resistive load on the 5 volt line Using 12 volt power the drive is expected to operate with a maximum of 120 mV peak to peak square wave injected noise at up to 10 MHz Using 5 volt power the drive is expected to operate with a maximum of 100 mV peak to peak square wave injected noise at up to 10 MHz Note Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read write current 2 7 3 Voltage tolerance Voltage tolerance including noise 5V 10 7 5 12V 10 7 5 2 7 4 Power management modes The drive provides programmable power management to provide greater energy efficiency In most systems you can control power management through the system setup program The drive features the following power management modes Power modes Heads Spindle Buffer Active Tracking Rotating Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled Active
43. ort seagate com customer warranty validation jsp From this page click on the Verify Your Warranty link You will be asked to provide the drive serial number model number or part number and country of purchase The system will display the warranty information for your drive Contact start stop cycles 50 000 at 25 50 rel humidity Supports Hotplug operation per the Serial ATA Revision 2 5 specification Yes One Gbyte eguals one billion bytes when referring to hard drive capacity Accessible capacity may vary depending on operating environment and formatting During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels Barracuda 7200 11 Serial Product Manual Rev E 9 2 1 Formatted capacity Model Formatted Duarameed Bytes per sector capacity sectors ST31500341AS 1500 Gbytes 2 930 277 168 512 ST31000333AS 1000 Gbytes 1 953 525 168 512 ST3640323AS ST3640623AS 640 Gbytes 1 250 263 728 912 ST3320613AS ST3320813AS 320 Gbytes 625 142 448 512 ST3160813AS 160 Gbytes 312 581 808 512 One Gbyte equals one billion bytes when referring to hard drive capacity Accessible capacity may vary depending on operating environment and formatting 2 1 1 LBA mode When addressing these drives in LBA mode all blocks sectors are consecutively numbered from 0 to n 1 where n i
44. outgas corrosive compounds should be minimized or eliminated The useful life of any electronic eguipment may be extended by replacing materials near circuitry with sulfide free alternatives 20 Barracuda 7200 11 Serial ATA Product Manual Rev E 3 0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive 3 1 Handling and static discharge precautions After unpacking and before installation the drive may be exposed to potential handling and electrostatic dis charge ESD hazards Observe the following standard handling and static discharge precautions Caution Before handling the drive put on a grounded wrist strap or ground yourself freguently by touching the metal chassis of a computer that is plugged into a grounded outlet Wear a grounded wrist strap throughout the entire installation procedure Handle the drive by its edges or frame only The drive is extremely fragile handle it with care Do not press down on the drive top cover Always rest the drive on a padded antistatic surface until you mount it in the computer Do not touch the connector pins or the printed circuit board Do not remove the factory installed labels from the drive or cover them with additional labels Removal voids warranty Some factory installed labels contain information needed to service the drive Other labels are used to seal out dirt and contamination Barrac
45. rage latency 4 16 msec Power on to ready 20 sec max Standby to ready 15 sec max Track to track seek time Average seek read lt 0 8 msec typical read 1 0 msec typical write lt 8 5 msec typical Average seek write lt 10 0 msec typical Startup current typical 12V peak 2 8 amps Voltage tolerance including noise 5V 10 7 5 12V 10 7 5 Ambient temperature 0 to 60 C operating 40 to 70 C nonoperating Temperature gradient 20 C per hour max operating 30 C per hour max nonoperating Relative humidity 5 to 95 operating 5 to 95 nonoperating Relative humidity gradient 30 per hour max Wet bulb temperature 37 7 C max operating 40 0 C max nonoperating Altitude operating 60 96 m to 3 048 m 200 ft to 10 000 ft Altitude nonoperating below mean sea level max 60 96 m to 12 192 m 200 ft to 40 000 ft Operational Shock 70 Gs max at 2 msec Non Operational Shock 300 Gs max at 2 msec Barracuda 7200 11 Serial ATA Product Manual Rev E Drive specification Vibration operating ST31500341AS ST31000333AS 2 22 Hz 0 25 Gs Limited displacement 22 350 Hz 0 50 Gs 350 500 Hz 0 25 Gs Vibration nonoperating 5 22 Hz 2 0 Gs 22 350 Hz 5 0 Gs 350 500 Hz 2 0 Gs Drive acoustics sound power Idle Performance Seek Quiet Seek 2 6 bels typical 2 5 bels typic
46. ries 30 Barracuda 7200 11 Serial ATA Product Manual Rev E 41 42 Barracuda 7200 11 Serial ATA Product Manual Rev E Seagate Seagate Technology LLC 920 Disc Drive Scotts Valley California 95066 4544 USA Publication Number 100507013 Rev E Printed in U S A
47. s the number of guaranteed sectors as defined above See Section 4 3 1 Identify Device command words 60 61 and 100 103 for additional information about 48 bit addressing support of drives with capacities over 137 Gbytes 2 2 Default logical geometry Cylinders Read write heads Sectors per track 16 383 16 63 LBA mode When addressing these drives in LBA mode all blocks sectors are consecutively numbered from 0 to n 1 where n is the number of guaranteed sectors as defined above 10 2 3 Recording and interface technology ST3640323AS ST3320613AS ST31500341AS ST31000333AS ST3640623AS ST3320813AS ST3160813AS Interface Serial ATA SATA Recording method Perpendicular Recording density kbits inch max 1462 1300 1250 Track density ktracks inch avg 199 182 Areal density Gbits inch avg A 228 219 Spindle speed RPM 7 200 0 2 Internal data transfer rate Mbits sec max 1 09 1520 1460 Sustained data transfer rate Mbytes sec max 135 120 119 data transfer rate 300 Mbytes sec max Barracuda 7200 11 Serial Product Manual Rev E 2 4 Physical characteristics Maximum height 1500 1000 and 640 GB models 320 and 160 GB models 26 1 mm 1 028 inches 20 17 mm 0 794 inches Maximum width 101 6 mm 4 000 0 010 inches Maximum length 146 99 mm 5 787 inches Typical weight 1500 GB models 1000 GB models 640 GB
48. screws in the side mounting holes or four screws in the bottom mounting holes See Figure 3 for drive mounting dimensions Follow these important mounting precau tions when mounting the drive Allow a minimum clearance of 0 030 inches 0 76 mm around the entire perimeter of the drive for cooling Use only 6 32 UNC mounting screws The screws should be inserted no more than 0 150 inch 3 81 mm into the bottom or side mounting holes Do not overtighten the mounting screws maximum torque 6 inch Ib 1 4 5 787 146 9898 max Recommended case temperature measurement location o 250 015 6 35 381 1 122 lt 1 638 7 3 lt both sides 020 41 605 1 28 499 a 000 508 101 60 1 1 4 000 i 101 6 a 4 1 028 max 1 138 26 111 max 3 505 r I Y 1 20 676 of conn Datum B 2 00 Notes 50 80 f dri Dimensions are shown in inches mm 1 Dimensions per SFF 8301 specification 1 2x3 750 2 x 95 25 j L U Em L I LM gt 7 2 x 1 625 2 x 41 28 1 s 2x1 750 14 2 x 44 45 Om 5A c 4 000 101 6 1 gt Recommended c
49. the drive to a 1 5 Gbits sec transfer rate 3 0 Gbits per second operation E Limit data transfer rate to 1 5 Gbits per second Sa Jumper block Figure Note 22 gt SATA power connector SATA interface connector 1 Serial ATA connectors 1 5Gbits jumper block only applies to ST3320613AS ST3320813AS and ST3160813AS models Barracuda 7200 11 Serial ATA Product Manual Rev E 3 3 Serial ATA cables and connectors The Serial ATA interface cable consists of four conductors in two differential pairs plus three ground connec tions The cable size may be 30 to 26 AWG with a maximum length of one meter 39 37 inches See Table 8 for connector pin definitions Either end of the SATA signal cable can be attached to the drive or host For direct backplane connection the drive connectors are inserted directly into the host receptacle The drive and the host receptacle incorporate features that enable the direct connection to be hot pluggable and blind mateable For installations which require cables you can connect the drive as illustrated in Figure 2 Power cable Figure 2 Attaching SATA cabling Each cable is keyed to ensure correct orientation Barracuda 7200 11 Serial ATA drives support latching SATA connectors Barracuda 7200 11 Serial ATA Product Manual Rev E 23 3 4 Drive mounting You can mount the drive in any orientation using four
50. ting During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels Barracuda 7200 11 Serial Product Manual Rev E 7 Table 3 Drive specifications summary for 320 and 160 Gbyte models Drive specification ST3320613AS ST3320813AS ST3160813AS Formatted capacity 512 bytes sector 320 Gbytes 160 Gbytes Guaranteed sectors 625 142 448 312 581 808 Heads 2 1 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read write heads 16 Default cylinders 16 383 Recording density 1250 kbits in max Track density 182 ktracks in avg Areal density 219 Gbits in avg Spindle speed 7 200 RPM Internal data transfer rate 1460 Mbits sec max Sustained data transfer rate OD 115 Mbytes sec max VO data transfer rate 300 Mbytes sec max ATA data transfer modes supported PIO modes 0 4 Multiword DMA modes 0 2 Ultra DMA modes 0 6 Cache buffer 16 Mbytes 8 Mbytes Height max 20 17 mm 0 794 inches Width max 101 6 mm 4 000 inches 0 010 inches Length max 146 99 mm 5 787 inches Weight typical 405 grams 0 893 Ib 390 grams 0 860 Ib Average latency 4 16 msec Power on to ready 9 sec max Standby to ready 9 sec max Track to track seek time lt 0 8 msec typical read 1 0 msec typical write
51. tion summary tables The specifications listed in the following tables are for quick reference For details on specification measure ment or definition see the appropriate section of this manual Barracuda 7200 11 Serial ATA Product Manual Rev E 3 Table 1 Drive specifications summary for 1500 and 1000 Gbyte models Drive specification ST31500341AS ST31000333AS Formatted capacity 512 bytes sector 1500 Gbytes 1000 Gbytes Guaranteed sectors 2 930 277 168 1 953 525 168 Heads 8 6 Discs 4 3 Bytes per sector 512 Default sectors per track 63 Default read write heads 16 Default cylinders 16 383 Recording density 1462 kbits in max 1300 kbits in max Track density 190 ktracks in avg 182 ktracks in avg Areal density 277 Gbits in avg 228 Gbits in avg Spindle speed 7 200 RPM Internal data transfer rate 1709 Mbits sec max 1520 Mbits sec max Sustained data transfer rate OD 135 Mbytes sec max 120 Mbytes sec max I O data transfer rate 300 Mbytes sec max ATA data transfer modes supported PIO modes 0 4 Multiword DMA modes 0 2 Ultra DMA modes 0 6 Cache buffer 32 Mbytes Height max 26 1 mm 1 028 inches Width max 101 6 mm 4 000 inches 0 010 inches Length max 146 99 mm 5 787 inches Weight typical 720 grams 1 587 Ib 630 grams 1 389 Ib Ave
52. uda 7200 11 Serial Product Manual Rev E 21 3 2 Configuring the drive Each drive on the Serial ATA interface connects point to point with the Serial ATA host adapter There is no master slave relationship because each drive is considered a master in a point to point relationship If two drives are attached on one Serial ATA host adapter the host operating system views the two devices as if they were both masters on two separate ports Both drives behave as if they are Device 0 master devices Serial ATA drives are designed for easy installation It is usually not necessary to set any jumpers on the drive for proper operation however if you connect the drive and receive a drive not detected error your SATA equipped motherboard or host adapter may use a chipset that does not support SATA speed autonegotiation The following option is only available on ST3320613AS ST3320813AS and ST3160813AS models If you have a motherboard or host adapter that does not support autonegotiation Install a jumper as shown in Figure 1 below to limit the data transfer rate to 1 5 Gbits per second and leave the drive connected to the SATA equipped motherboard or host adapter that doesn t support autonegotiation or Install a SATA host adapter that supports autonegotiation leave the drive jumper block set to Normal operation see Figure 1 below and connect the drive to that adapter This option has the benefit of not limiting

Seagate Barracuda 7200.11 1.5TB

Contents

Download Pdf Manuals

Related Search

Related Contents