Philips FWM576 MP3/WMA Mini Hi-Fi System
Contents
1. o select DBB o acti effect o activate or deact various sound featu REPEAT repeatedly SHUFFLE ivate or deacti he desired bass boost level DBB 1 2 DBB 3 or DBB OFF ivate the surround sound MAX SOUND MAX ivate the optimal mix of res o playback track s disc s programme Turns on off the random play mode 4 DIM o select different brightness for the display screen DIM 1 DIM 2 DIM 3 or DIM OFF 12 OPEN A to open the tape deck door 13 PROGRAM for CD MP3 CD to programme disc tracks for Tuner to programme preset radio stations for Clock to select 12 or 24 hour clock mode CET to connect headphones 5 MASTERVOLUME VOL to increase or decrease the volume IR SENSOR sensor for the infrared remote control 47 RECORD REC to start recording on tape deck 1 or 2 AUTO REPLAY A REPLAY to select continuous playback in either AUTO REPLAY or ONCE MODE only Disc tray OPEN CLOSE to open or close the disc tray 27 DISC CHANGE to change disc s 22 Display screen to view the current status of the system 23 SLEEP to activate deactivate or set the sleep timer MUTE Mutes or restores the volume 25 TIMER ON OFF activates deactivates the timer function DISPLAY to display the album and title name for MP3 disc Tape deck 1 Tape deck 2 CLOCK TI2. NO AHILO appears if no audio file is found in the USB device O Play the USB s audio files as you do with the albums tracks on a CD See CD MP3 Operations Notes For compatibility reasons the album track information may differ from what it is displayed through flash players music management software File names or ID3 tags will be displayed as if they are not in English Clock Timer 7 0 Y CD TUNER TAPEZ AUX 900 E IMPORTANT Use CLOCK TIMER on the set to set the clock and timer View clock The clock if it is set will be shown in standby mode To view the clock in any source mode CD or TUNER for example O Press CLOCK TIMER gt The clock is displayed for a few seconds gt f the clock has not been set is displayed Clock setting The clock can be set in either 12 hour or 24 hour mode AM 12 00 or 00 00 for example O In standby or view clock mode press Y P CLOCKeTIMER once In other source mode press CLOCK TIMER twice O Press PROGRAM repeatedly to select clock mode gt AM i200 or GOOD starts flashing Press ALBUM 44 gt gt on the system repeatedly to set the hour O Press TITLE Mi Pl on the system repeatedly to set the minute O Press CLOCK TIMER again to store the setting gt The clock starts working To exit withou
3. Mi Dl on the system repeatedly to set the minute for the timer to start Press CLOCKeTIMER to store the start time gt TIMER remains on the display At the preset time the selected source will play To exit without storing the setting Press STOP R on the system Notes When the preset time is reached and the selected disc tray is empty the next available disc will be selected If all the disc trays are not available Tuner will be selected automatically During timer setting if no button is pressed within 90 seconds the system will exit timer setting mode automatically To deactivate the TIMER Press TIMER ON OFF on the remote control gt The display will show GFF and TIMER will disappear from the display To activate the TIMER Press TIMER ON OFF on the remote control gt The last set timer information will be shown for a few seconds and TIMER will appear on the display Sleep timer setting The sleep timer enables the system to switch to standby mode automatically at a preset time Press SLEEP on the remote control repeatedly to select a preset time gt The selections are as follows time in minutes GSE SSPE BE Rt Es SLEEP XX or OFF is displayed XX is the time in minutes When you reach the desired length of time stop pressing the SLEEP button gt SLEEP is shown except for UFF mode gt The sleep timer is now set Before the system switches to standby mod
4. a transformer TV or PAT speaker To select automatic replay or one time playback Loading tape O Press AUTO REPLAY or A REPLAY O Press OPEN to open the tape deck door repeatedly to select the different playback modes gt AUTO REPLAY CZ or ONCE gt is displayed AUTO REPLAY the tape will rewind automatically at the end of playback and replay again It 7 will replay up to a maximum O Load the tape with the open side downward and of 20 times full spool to the left ONCE the tape will playback the O Close the tape deck door selected side once and then stop 20 o Rewinding Fast forwarding Stop playback press lt 4 gt gt gt The tape will stop automatically at the end of rewinding or fast forwarding Press M to stop rewinding or fast forwarding Note During rewinding or fast forwarding of a tape it is also possible to select another source CD or TUNER for example General information on recording For recording use only tape of IEC type normal tape The recording level is set automatically regardless of the position of the Volume DBB DSC and so forth The tape is secured at both ends with leader tape At the beginning and end of the tape nothing will be recorded for six to seven seconds To prevent accidental recording break out the tab on the left shoulder of the tape side you want to protect If CHECK TAPE is displayed the protection tab has been
5. broken Put a piece of clear adhesive tape over the opening Tape Operation Recording IMPORTANT Recording is permissible if copyright or other rights of third parties are not infringed upon Recording is possible only on tape deck 2 Preparation for recording O Press TAPE to select TAPE 2 O Load a recordable tape into tape deck 2 with full spool to the left O Prepare the source to be recorded CD load the disc s TUNER tune to the desired radio station TAPE load the prerecorded tape into tape deck 1 with the full spool to the left AUX connect external equipment USB connect a USB mass storage device When recording is in progress gt REC starts flashing It is not possible to listen to another source except tape dubbing It is not possible to activate the timer function during recording or tape dubbing One touch recording O Press CD TUNER AUX or USB to select the source O Start playback of the selected source O Press RECORD to start recording To stop recording Press M on the system Note One Touch Recording is not possible in TAPE mode SELECT SOURCE is displayed 21 Tape Operation Recording 22 CD USB Synchronised start recording Select CD or USB source Press TITLE a Pl to select the desired track then press RECORD to start recording You can programme the track
6. Press PROGRAM or STOPE on the system Note If no preset number is selected automatic preset will begin from preset 1 and all your former presets will be overridden Manual Preset Programming O Tune to your desired radio station refer to Tuning to radio stations Press PROGRAM gt PROG starts flashing gt The next available preset number is displayed for selection To store the radio station to another preset number Press TITLE Mi gt PRESET to select the desired preset number Press PROGRAM again to store the radio station gt PROG disappears Repeat steps 1 3 to store other radio stations To exit manual preset mode Press ll on the system Notes If you attempt to store more than 40 preset radio stations FULL is displayed During programming if no key is pressed within 20 seconds the system will exit the programme mode automatically Tuning to preset radio stations Once you ve programmed the radio stations press TITLE I4 gt PRESET to select the desired preset number gt The preset number radio frequency and waveband are displayed For Recording please refer to Tape Operation Recording Radio Reception Changing tuning grid not available for all versions In North and South America the frequency step between adjacent channels in the MW band is 10 kHz 9 kHz in some areas Changing the tuning grid will erase all prev
7. Stays and the programme mode remains active gt The total number of tracks programmed and the total playing time are displayed gt For MP3 disc total playing time will not be You can select and change the various play modes before or during playback O Press REPEAT on the remote control to select REPEAT TRACK to repeat playback of the current track Agro shown gt REPEAT DISC to repeat playback of the current disc O To start programme play press gt IH gt REPERT UFF to stop repeat function and PLAY PROGRAM is displayed playback current disc Notes ork FUME normal playback press REPEAT It is not possible to create a programme with until REPEAT OFF is displayed MP3 tracks from multiple CDs or combined with O Press SHUFFLE on the remote control to normal audio tracks select If the total playing time is more than 99 59 gt SHUFFLE UN to random playback of the then is displayed instead of the total current disc playing time gt SHUFFLE DFF to stop shuffle function If you attempt to programme more than 99 and playback current disc tracks PROGRAM FULL is displayed During programming if no button is pressed within 20 seconds the system will exit the programme mode automatically O To resume normal playback press SHUFFLE until SHUFFLE OFF is displayed REP or SHUF is shown except SHUFFLE OFF mode To review the programme O Stop playback and
8. 2 AUX o select the input for an additional appliance AUX USB DIRECT on the remote only o select USB source directly Mode Selection ALBUM lt gt CD USB to search backward forward for Tuner o tune to a lower or higher radio frequency for TapE sanius o rewind or fast forward for Clock ranet on the system only to set the hour STOP E for CD MP3 CD USB to stop playback or to clear a programme Lela on the system only to stop programming for Tape to stop playback or recording for DENON on the system only to activate deactivate the demonstration for Clock cu on the system only to exit clock setting for Plug amp Play on the system only to exit plug amp play mode Pil for CD MP3 CD USB to start or interrupt playback to select previous next album for Tape for Plug amp Play TITLE a for MP3 CD USB for Clock o start playback on the system only to initiate and start plug amp play mode gt PRESET o select previous next title o skip to the beginning of he current previous or next rack to select a preset radio station DSC on the system only to set the minute Selects different type of preset sound equaliser settings OPTIMAL JAZZ ROCK or TECHNO VAC Selects different type of ambience based equaliser settings HALL CONCERT or CINEMA O DBB INC SURR DBB IS
9. B device or memory card Inserting batteries into the remote control 9 Controls Controls on the system and remote control TE EN ad a RE RS ER te 10 11 Basic Functions Plug and Play Demonstration mode Switching the system on 13 Switching the system to standby mode 13 Volume control Sound control MAX Sound VAC Virtual Ambience Control DSC Digital Sound Control DBB Dynamic Bass Boost Incredible Surround CD MP3 CD Operations Discs for playback 15 About MP3 disc Loading discs 15 Playing discs sese Replacing discs during playback Selecting a desired track passage x Selecting a desired Album Title Different play modes SHUFFLE and REPEAT 17 Programming the disc tracks 17 Erasing the programme 17 Radio Reception Tuning to radio stations 18 Storing preset radio stations 18 19 Automatic Preset Programming Manual Preset Programming Tuning to preset radio stations 19 Changing tuning grid 19 Tape Operation Recording Loading tape Playing tapes Rewinding Fast forwarding General information on recording Preparation for recording eee One touch recording ssssssssessessssssssssssssssssssssse CD USB Synchronised start recording Dubbing tapes External S
10. DBY ON or on the remote control gt The clock will appear on the display when the system is in standby mode Dim mode You can select the desired brightness for the display In any source mode press DIM MODE repeatedly to select DIM 1 DIM 2 DIM 3 or DIM OFF display mode gt DIM is shown except for DIM OFF mode DIM Brightness Spectrum mode Analyser Em EM Cs IEC Em CACCE Volume control Adjust VOLUME to increase turn knob clockwise or press VOLUME or decrease turn knob anti clockwise or press VOLUME the sound level To listen through the headphones Connect the headphones plug to the 4 socket at the front of the system gt The speakers will be muted To switch off the volume temporarily Press MUTE on the remote control gt Playback will continue without sound and MUTE is displayed To restore the volume press MUTE again or increase the volume level 13 Basic Functions 14 Sound control For optimal sound listening select only one of the following navigation sound controls at a time MAX DSC or VAC MAX sound provides the best mixture of various sound features DSC VAC DBB for example Press MAX SOUND or MAX on the remote control repeatedly gt f activated MAX SOUND is shown and the MAX SOUND button lights up gt If deactivated MAX OFF is displayed and the MAX button black out Note When MAX sound is selected all other
11. Fi system you can enjoy the device s stored music through the powerful speakers of Hi Fi system Playing a USB mass storage device Compatible USB mass storage devices With the Hi Fi system you can use USB flash memory USB 2 0 or USB1 1 USB flash players USB 2 0 or USB1 1 memory cards requires an additional card reader to work with this Hi Fi system Note In some USB flash players or memory devices the stored contents are recorded using copyright protection technology Such protected contents will be unplayable on any other devices such as this Hi Fi system External Sources Supported formats USB or memory file format FAT12 FAT16 FAT32 sector size 512 65 536 bytes MP3 bit rate data rate 32 320 Kbps and variable bit rate WMA v or earlier Directory nesting up to a maximum of 8 levels Number of albums folders maximum 99 Number of tracks titles maximum 400 ID3 tag v2 0 or later File name in Unicode UTF8 maximum length 128 bytes The system will not play or support the following Empty albums an empty album is an album that does not contain MP3 WMA files and will not be shown in the display Non supported file formats are skipped This means that e g Word documents doc or MP3 files with extension dlf are ignored and will not be played AAC WAV PCM audio files DRM protected WMA files WMA files in Lossless form
12. MER CLK TIMER to view the clock USB DIRECT jack for the external USB mass storage device Controls Hearing Safety Listen at a moderate volume Using headphones at a high volume can impair your hearing This product can produce sounds in decibel ranges that may cause hearing loss for a normal person even for exposure less than a minute The higher decibel ranges are offered for those that may have already experienced some hearing loss Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound So after prolonged listening what sounds normal can actually be loud and harmful to your hearing To guard against this set your volume to a safe level before your hearing adapts and leave it there To establish a safe volume level Set your volume control at a low setting Slowly increase the sound until you can hear it comfortably and clearly without distortion Listen for reasonable periods of time Prolonged exposure to sound even at normally safe levels can also cause hearing loss Be sure to use your equipment reasonably and take appropriate breaks Be sure to observe the following guidelines when using your headphones Listen at reasonable volumes for reasonable periods of time Be careful not to adjust the volume as your hearing adapts Do not turn up the volume so high that you can t hear what s around you You should use caution or temporarily disco
13. MP3 CD Mini Hi Fi System FWM576 User manual Manual do usu rio Manual del usuario PHILIPS M xico No NYCE Es necesario que lea cuidadosamente su instructivo de manejo PRECAUCI N ADVERTENCIA No abrir riesgo de choque el ctrico ATENCI N Verifique que el voltaje de alimentaci n sea el requerido para su aparato Para evitar el riesgo de choque el ctrico no quite la tapa En caso de requerir servicio dirijase al personal calificado Descripci n Minisistema de Audio Modelo FWM576 55 Alimentaci n 110 127 220 240V 50 60 Hz Consumo 165W Importador Philips Mexicana S A de C V Domicilio Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Localidad y Tel Edo de M xico C P 52784 Tel 52 69 90 00 Exportador Philips Electronics HK Ltd Pa s de Origen China N de Serie LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO a N AVISO IMPORTANTE CAUTION Philips Mexicana S A de C V no se hace Use of controls or responsable por da os o desperfectos causados por adjustments or performance Maltrato descuido o mal uso presencia de d ther than insectos o roedores cucarachas ratones etc of proce UNERA i Cuando el aparato no haya sido operarado herein may result in de acuerdo con el instructivo del uso fuera hazardous radiation de los valores nominales y tolerancias de las exposure or other unsafe tensiones voltaje frecuencia cicl
14. STOPE For MP3 CD During playback press DISPLAY to show the album and title name o Replacing discs during playback Press DISC CHANGE gt The disc tray will open without interrupting current playback To change the inner disc press DISC CHANGE again gt CHANGING DISC will stop playing gt The disc tray will close to retrieve the inner disc then reopen with the inner disc accessible is displayed and the disc Selecting a desired track passage To search for a particular passage during playback Press and hold ALBUM 34 KE and release it when the desired passage is located gt During searching the volume will be reduced To select a desired track Press TITLE 14 Dl repeatedly until the desired track is displayed If playback is stopped press K Ito start playback Selecting a desired Album Title MP3 disc only To select a desired album Press ALBUM 44 gt gt repeatedly gt The album s name will scroll through the display once To select a desired title Press TITLE 4 gt repeatedly gt The title s name will scroll through the display once Note The album and title will only displayed once when selected To view again press the DISPLAY button repeatedly to display ALBUM and TITLE alternatively CD MP3 CD Operations Different play modes SHUFFLE O Press PROG to store the track and REPEAT O To end programming press STOPE once gt PROG
15. adio reception is poor Recording or playback cannot be made The tape deck door cannot open The system does not react when buttons are pressed Sound cannot be heard or is of poor quality The left and right sound outputs are reversed The remote control does not function properly The time is not working Not all lighted buttons are showing light The Clock Timer setting is erased The system displays features automatically and buttons start flashing NUNES SEEN If the signal is too weak adjust the antenna or connect an external antenna for better reception Increase the distance between the Mini HiFi System and your TV or VCR Clean deck parts see Maintenance Use only NORMAL IEC tape Apply a piece of adhesive tape over the missing tab space Remove and reconnect the AC power plug and switch on the system again Remove and reconnect the AC power plug and switch on the system again Adjust the volume Disconnect the headphones Check that the speakers are connec ted correctly Check if the stripped speaker wire is clamped Make sure the MP3 CD was recorded within 32 256 kbps bit rate with sampling frequencies at 48 kHz 44 1 kHz or 32 kHz Check the speaker connections and location Select the source CD or TUNER for example before pressing the function button E Reduce the distance between the remote control and the system Insert the batteries with their polariti
16. aje de alimentaci n el ctrica y las caracter sticas que deben reunir las instalaciones auxiliares Por fen menos naturales tales como temblores inundaciones incendios descargas el ctricas rayos etc o delitos causados por terceros choques asaltos ri as etc operation PHILIPS 3 A ME 7 G MAMP3 MINI HI FI SYSTEM 19 18 WMA MP3 CD PLAYBACK g MI AUTO STOP TAPE PLAYBACK TAPE 2 PLAY REC AUTO REPLAY MAX SOUND DYNAMIC BASS BOOST DIGITAL SOUND CONTROL VIRTUAL AMBIENCE CONTROL INCREDIBLE SURROUND DEMO MODE To turn ON To turn OFF DEMO STOP DEMO STOP Press amp HOLD pa button Press amp HOLD E button for 5 seconds for 5 seconds PLUG amp PLAY ar tuner installation e Follow instructions Press PLAY Plug in the unit in the display English nes 6 Espa ol 30 Portugu s 54 Portugu s Contents General Information Supplied accessories Environmental information Safety information 7 Preparations Rear CONNECTIONS see 8 9 Power Antennas Connection Speakers Connection Optional connection sn 9 Connecting a US
17. at How to transfer music files from PC to a USB mass storage device By dragging and dropping music files you can easily transfer your favorite music from PC to a USB mass storage device For the flash player you can also use its music management software for the music transfer However those WMA files may be unplayable for compatibility reasons 23 External Sources 24 How to organize your MP3 WMA files on the USB mass storage device This Hi Fi system will browse the MP3 WMA files in the folders sub folders titles order Example Root Title 001 Title 002 Title 003 Album 01 Title 001 Title 002 Title 003 Album 02 Title 001 Title 002 Title 003 Album 03 Title 001 Title 002 Title 003 Organize your MP3 WMA files in different folders or subfolders as required Notes If you have not organized MP3 WMA files into any albums on your disc an album 00 will be automatically assigned for all those files Make sure that the file names of MP3 files end with mp3 and the file names ofWMA files end with wma For DRM protected WMA files use Windows Media Player 10 or later for conversion Visit www microsoft com for details about Windows Media Player and WM DRM Windows Media Digital Rights Management Check the USB device has been properly connected See Installation Connecting an additional appliance Press CD USB once or more to select USB or USB DIRECT on the remote control
18. d 15 SUR is displayed DFF is displayed CD MP3 CD Operations xs Go VOL E RY A MAX USB DIRECT e IMPORTANT This system is designed for regular discs Therefore do not use any accessories such as disc stabiliser rings or disc treatment sheets etc as offered on the market because they may jam the changer mechanism Do not load more than one disc into each tray Discs for playback This system can playback all digital audio CD finalised digital audio CD Recordable CDR discs and finalised digital audio CD Rewritable CDRW discs MP3 CDs CD ROMs with MP3 tracks ase oise oise DIGITAL AUDIO DIGITALAUDIO DIGITAL AUDIO Recordable ReWritable About MP3 disc Supported formats 1509660 Joliet Multisession Max track number plus album is 255 Max nested directory is 8 levels The max album number is 32 The max MP3 program track number is 99 Supported VBR bit rate Supported sampling frequencies for MP3 disc are 32 kHz 44 1 kHz 48 kHz Supported Bit rates of MP3 disc are 32 64 96 128 192 256 kbps Loading discs Press OPEN CLOSE to open the disc tray O Load up to two discs on the individual disc trays To load the third disc press DISC CHANGE gt The disc tray will rotate until th
19. e a countdown of 10 seconds is displayed SLEEP MD SEERA GLEEP dP GLEE To check the remaining length of time after sleep timer is activated Press SLEEP once To change the preset sleep timer Press SLEEP again while the remaining sleep timer is shown gt The display will show the next sleep timer options To deactivate the sleep timer Press SLEEP repeatedly until OFF is displayed or press STANDBY ON AMPLIFIER RMS output power LF channel HF channel Total power Signal to noise ratio Frequency response Input sensitivity A a aa a Re Output Speakers Headphones 1 8 Q 1 kHz 10 THD 120 W per channel 120 W per channel 67 dB A IEC 50 15000 Hz CD MP3 CD PLAYER Number of programmable tracks wuss 99 Frequency response 50 20000 Hz 3dB Signal to noise ratio 75 dBA Channel separation 60 dB 1 kHz Total harmonic distortion esses lt 0 003 MPEG 1 Layer 3 MP3 CD MPEG AUDIO MP3 GD bitrate 32 256 kbps 128 kbps advised Sampling frequencies wees 32 44 1 48 kHz TUNER FM wave range 108 MHz 531 1602 kHz 530 1700 kHz MW wave range 9 kHz MW wave range 10 kHz Tuning grid 9 10 kHz Number of presets rm 40 Antenna EM au MW Loop antenna USB PLAYER 12Mb s V1 1 support MP3 and WMA files Number of albums folders max
20. e empty tray is ready for loading 15 CD MP3 CD Operations Press OPEN CLOSE to close the disc tray 16 Torn DISC gt READING tray total number of tracks and the playing time will appear on the display gt A lighted button indicates that a disc is loaded on the disc tray gt For MP3 disc the name of the first album and title will be scrolled through the display once and Www Twn followed by AK K TXXX scrolls The selected disc Notes Load the discs with the label side facing up To ensure good system performance wait until the disc tray completely reads the disc s before proceeding For MP3 disc the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc Playing discs To play current disc on the disc tray Press gt H gt The current discs will play once then stop gt During playback the selected disc tray track number and elapsed playing time of the current track are displayed gt For MP3 disc TITLE is shown For mixed mode discs only one mode will be selected for playback depending on the recording format To play the selected disc only In CD mode press DISC 1 2 3 or CD 1 2 3 on the remote control gt The selected disc will play once then stop To interrupt playback Press IL gt The current track time flashes To resume playback press K 11 again To stop playback Press
21. es signs aligned as indicated Replace the batteries Point the remote control directly towards the IR sensor Set the clock correctly Press and hold CLOCK TIMER to switch on the timer If recording or tape dubbing is in progress stop recording Press DIM to select DIM OFF display mode Power has been interrupted or the power cord has been disconnected Reset the clock timer Press and hold ll on the system to switch off the demonstration 29 Meet Philips at the Internet hetp www philips com y ae CLASS 1 LASER PRODUCT PHILIPS s Printed in China PDCC JS JW 0648
22. imum 99 Number of tracks titles maximum 400 Specifications TAPE PLAYER Frequency response Normal tape type 80 12500 Hz 8 dB Signal to noise ratio Normal tape type Du 48 dB A Wow and flutter mm 0 4 DIN SPEAKERS System 2 way double port bass reflex Impedance ess nine Woofer Tweeter Dimensions w x h x d Sn ia 235 x 455 x 266 mm WEE a 6 1 kg each GENERAL Material finish Polystyrene Metal AC Power 110 127 220 240V RR Re Geo RE Pe 50 60 Hz Switchable Standby Ha Dimensions w x h x d 265 x 310 x 367 mm Weight without speakers 9 1 kg Specifications and external appearance are subject to change without notice 27 Maintenance Cleaning the Cabinet Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasives Cleaning Discs When a disc becomes dirty clean it with a cleaning cloth Wipe the disc from the centre out Do not wipe in circular motion Do not use solvents such as benzene thinner commercially available cleaners or antistatic spray intended for analogue records Cleaning the disc lens After prolonged use dirt or dust may accumulate at the disc lens To ensure good playback quality clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner Follow the instructions supplied with cleaner Troublesho
23. iously stored preset radio stations Disconnect the system from the AC power supply pull out the AC power cord While holding down TUNER and KE on the system reconnect the system to the AC power supply gt The display will show GRID 9 or OTRA Im GRID I0 Notes GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa 19 Tape Operation Recording ALBUM REPEAT PROGRAM SHUFFLE DISPLAY NS REC A REPLAY CLK TIMER TIMER ON OFF CA EIA o 0000 one e omens OM SEP MUTE OOOO MAX_ USB DIRECT 00 Vo AUTO STOP AUTO REPLAY TAPE PLAYBACK PLAY REC pa n PHILIPS IMPORTANT Playing tapes Before playing a tape check and tighten slack tape with a pencil Slack tape may get To playback a selected tape deck jammed or may burst in the mechanism O Press TAPE or TAPE 1 2 on the remote C 120 tape is extremely thin and is easily control repeatedly to select tape deck 1 or 2 deformed or damaged It is not O Press gt H recommended for use in this system Store the tapes at room temperature and To stop playback do not put them too close to a magnetic p p ay field for example
24. ltage of your local power supply If not please consult your dealer Place the system on a flat hard and stable surface Place the system in a location with adequate ventilation to prevent internal heat build up in your system Allow at least 10 cm 4 inches clearance from the rear and the top of the unit and 5 cm 2 inches from each side The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc Do not expose the system batteries or discs to excessive moisture rain sand or heat sources caused by heating equipment or direct sunlight No naked flame sources such as lighted candles should be placed on the apparatus No objects filled with liquids such as vases shall be placed on the apparatus Don t expose the system to dripping or splashing Install this unit near the AC outlet and where the AC power can be reached easily The lens may cloud over when the system is suddenly moved from cold to warm surroundings making it impossible to play a disc Leave the system in the warm environment until the moisture evaporates The mechanical parts of the set contain self lubricating bearings and must not be oiled or lubricated When the system is switched to Standby mode it is still consuming some power To disconnect the system from the power supply completely remove the AC power plug from the wall socket Preparations Tweeter c
25. ntinue use in potentially hazardous situations Do not use headphones while operating a motorized vehicle cycling skateboarding etc it may create a traffic hazard and is illegal in many areas Notes for remote control First select the source you wish to control by pressing one of the source select keys on the remote control CD or TUNER for example Then select the desired function gt 4 P for example 11 Basic Functions WMA MP3 CD PLAYBACK MAX USB DIRECT IMPORTANT Before you operate the system complete the preparation procedures Plug and Play for tuner installation Plug and Play allows you to store all available radio stations automatically First time setup power up MITA When you turn on the main supply HUT U INSTALL PRESS PLAY is displayed Press K Ill on the system to start installation gt PLUG AND PLAY displayed followed by TUNER and AUTO gt PROG starts flashing gt All available radio stations with sufficient signal strength will be stored automatically starting from FM and followed by MW band When all the available radio stations are stored or the memory for 40 presets are used the last preset radio station will be played THIET TL INSTALL is To reinstall Plug and Play In standby or demonstration mode press and h
26. old gt H on the system until AUTO INSTALL PRESS PLAY is displayed Press K IM again to start installation gt All previously stored radio stations will be replaced To exit without storing the Plug and Play Press M on the system gt If you do not complete the Plug and Play installation the function will be restarted when you next turn on the main supply again Notes When the power is turned on the disc tray may open and close to initialise the system If no stereo frequency is detected during Plug and Play CHECK ANTENNA will be displayed During Plug and Play if no button is pressed within 15 seconds the system will exit Plug and Play mode Basic Functions Demonstration mode The system has a demonstration mode that shows the various features offered by the system To activate the demonstration In standby mode press and hold ll on the system for 5 seconds to switch to demonstration To deactivate the demonstration Press and hold ll on the system for 5 seconds to switch to standby mode Switching the system on In standby demonstration mode Press STANDBY ON to switch on the last selected source Press CD TUNER TAPE TAPE 1 2 or AUX Press OPEN CLOSE DISC 1 2 3 CD 1 2 3 DISC CHANGE gt The system will switch to CD mode Switching the system to standby mode In demonstration mode Press and hold Mi on the system In any other source mode Press STAN
27. onnection UT loo FM wire antenna UT terminals 1 oo NE Speaker MM Speaker right left a Woofer connection terminals AC power cord Rear connections Antennas Connection Connect the supplied MW loop antenna and FM antenna to the respective terminals Adjust the position of the antenna for optimal reception The type plate is located at the rear of the system a Power MW Antenna Before connecting the AC power cord to the wall outlet ensure that all other connections have been made If your system is equipped with a Voltage Selector set the VOLTAGE SELECTOR to the local power line voltage Warning 2 Fix the claw For optimal performance use only the to the slot original power cable El o Never make or change any connections MWANTENNA y with the power switched on To avoid overheating of the system a safety circuit has been built in Therefore your system may switch to Standby mode automatically under extreme conditions If O Position the antenna as far as possible from a TV this happens let the system cool down VCR or other radiation source before reusing it not available for all versions Preparations FM Antenna O Insert the USB device s USB plug into the Be socket on the set OR a for the devices with USB cables K O Insert one plug of the USB cable not supplied N to the Bo socket on the se
28. oting 28 WARNING Cleaning the Heads and the Tape Paths To ensure good recording and playback quality clean the heads A the capstan s B and pressure roller s after every 50 hours of tape operation Use a cotton swab slightly moistened with cleaning fluid or alcohol You also can clean the heads by playing a cleaning tape once Demagnetising the heads Use a demagnetising tape available at your dealer Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to remedy a problem by following these hints consult your dealer or Philips for help Problem Solution oan nT U mn Tr VO DISC is displayed DISC NOT FINALIZED is displayed Some files on the USB device are not displayed TEV ILE NOT SUPPORTED scrolls on the display Vv Vv Vv Insert a disc Check if the disc is inserted upside down Wait until the moisture condensation at the lens has cleared Replace or clean the disc see Maintenance Use a finalized CD RW or a correct MP3 CD format disc Use a finalised CD RW or CD R Check if the number of folders exceeds 99 or the number of titles exceeds 400 Remove the USB mass storage device or select another source R
29. ources Connecting external equipment 22 Using a USB mass storage device 22 Clock Timer View clock Clock setting Timer setting ss To deactivate the TIMER To activate the TIMER Sleep timer setting 24 Specifications 1 11ss1s1sis1s1s1111e 25 Maintenance Troubleshooting 26 27 IMPORTANT PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY FOR COUNTRIES THAT OPERATE AT 110V 127V PLEASE ADJUST TO 110V 127V BEFORE YOU SWITCH ON THE SYSTEM Supplied accessories 2 speaker boxes remote control MW loop antenna FM wire antenna AC power cord Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialised company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment General Information Safety information Before operating the system check that the operating voltage indicated on the typeplate or the voltage indication beside the voltage selector of your system is identical with the vo
30. press TITLE P repeatedly O To exit review mode press STOPE Note During program play mode or playing a MP3 CD it is not possible to repeat playback of the current disc Repeat Disc mode Erasing the programme Programming the disc tracks O Press STOPE once when playback is stopped Programming tracks is possible when playback is or twice during playback stopped Up to 99 tracks can be stored in the gt PROG disappears and PROGRAM CLEARED memory in any order is displayed O Load the desired discs on the disc tray refer to Loading discs Press DISC 1 2 3 to select a disc Note The programme will be erased when the system is disconnected from the power supply or when the Press PROG to start programming disc tray is opened gt PROG starts flashing O Press TITLE I DI repeatedly to select the For Recording please refer to Tape desired track Operation Recording O For MP3 disc press ALBUM lt 4 gt gt and TITLE I Bi to select the desired album and title for programming 17 Radio Reception CD TUNER WE AUX XR Cm Cm Con CD Ge WMA MP3 CD PLAYBACK REPEAT PROGRAM SHUFFLE DISPLAY us Co RE w uen TONO OOO OOO CL cas SE ME A OS MAX USB DIRECT 1 JO Tuning to radio stations O Press TUNER to select TUNER mode gt TUNER is displayed A fe
31. rity as Do not connect speakers with an impedance indicated by the and symbols inside the lower than the speakers supplied Please refer to battery compartment the SPECIFICATIONS section of this manual Optional connection The optional equipment and connecting cords are not supplied Refer to the operating instructions of the connected equipment for details Connecting a USB device or memory CAUTION card Remove batteries if they are exhausted or will not be used for a long time By connecting a USB mass storage device Do not use old and new or different including USB flash memory USB flash players types of batteries in combination or memory cards to the Hi Fi system you can Batteries contain chemical substances so enjoy the device s stored music through the they should be disposed of properly powerful speakers of Hi Fi system Controls illustrations on page 3 Controls on the system and remo te control O STANDBY ON o switcl h the system on or to standby mode 2 DISC 1 2 3 CD 1 2 3 o selec a disc tray for playback 3 Source selection to select the following 10 o switcl CD USB on the system only h between disc or USB source CD on the remote only for MP3 o select disc source press repeatedly to select a disc tray for playback TUNER o select waveband FM or MW TAPE TAPE 1 2 o select tape deck 1 or
32. s in the order you want them to be recorded refer to CD Operation Programming the disc tracks Press RECORD to start recording gt The disc will start playback automatically To stop recording Press STOP E gt Recording and disc playback will stop simultaneously o Dubbing tapes Load the prerecorded tape in tape deck 1 You can set the tape to the desired passage where recording will start Press RECORD gt Playing and recording will start simultaneously 3 DUB is displayed Dubbing of tapes is possible on one side of the tape only To continue recording on the reverse side at the end of side A flip the tape to side B and repeat the procedure To stop dubbing Press STOP E Notes Dubbing of tapes is possible only from tape deck 1 to tape deck 2 To ensure good dubbing use tapes of the same length Connecting external equipment O Connect the audio out terminals of the external equipment TV VCR Laser Disc player DVD player or CD Recorder to the AUX terminals of your system Press AUX to select external equipment gt AUX is displayed Note All the sound control features DSC or DBB for example are available for selection Refer to the operating instructions for the connected equipment for details For Recording please refer to Tape Operation Recording Using a USB mass storage device By connecting a USB mass storage device to the Hi
33. sound navigation will switch off automatically VAC Virtual Ambience Control The VAC feature enables you to adjust the system to select a type of environment Press WAC to select CINEMA HALL or CONCERT gt The selected VAC is shown Note When you select VAC Incredible Surround will switch on automatically DSC Digital Sound Control The DSC feature enables you to enjoy special sound effects that have preset equaliser settings providing the best music reproduction Press DSC to select OPTIMAL JAZZ ROCK or TECHNO gt The selected DSC is shown DBB Dynamic Bass Boost There are three DBB settings to enhance the bass response Press DBB to select DBB 1 DBB 2 DBB 3 or DBB OFF gt The selected DBB is shown except for DBB OFF mode Note Some discs or tapes might be recorded in high modulation which causes a distortion at high volume If this occurs switch off DBB or reduce the volume Automatic DSC DBB selection The best DBB setting is generated automatically for each DSC selection You can manually select the DBB setting that best suits your listening environment TECHNO Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide enveloping stereo effect Press and hold DBBeINC SURR or DBB IS on the remote control until INCR SUR is display Ifactivated INLR gt If deactivate
34. t O Insert the other plug of the USB cable to the O For better FM stereo reception connect an USB output terminal of the USB device outdoor FM antenna to the FM ANTENNA OR terminal for the memory card O insert the memory card into a card reader not supplied O Use a USB cable not supplied to connect the card reader into the Se socket on the set Speakers Connection Front Speakers Connect the speaker wires to the SPEAKERS terminals right speaker to R and left speaker to L red wires to and black wires to of Connecting a non USB device the woofer connection terminals gray wires to and blue wires to of the tweeter Use a cinch cable to connect AUX to the connection terminals analogue audio out terminals of an external equipment TV VCR Laser Disc player DVD player or CD Recorder El y e A Ea Ifyou are connecting equipment with a mono output a single audio out terminal connect it to O Fully insert the stripped portion of the speaker the AUX left terminal Alternatively you can use a wirecinto the terminalias show single to double cinch cable the output sound still remain mono Notes For optimal sound performance use the Inserting batteries into the supplied speakers remote control Do not connect more than one speaker to any Insert two batteries Type RO6 or AA into the one pair of speaker terminals remote control with the correct pola
35. t storing the setting O Press STOP Mon the system Notes The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs During clock setting if no button is pressed within 90 seconds the system will exit clock setting mode automatically 25 Clock Timer O o 6 26 Timer setting The system can switch on to CD TUNER or USB mode automatically at a preset time serving as an alarm to wake you up IMPORTANT Before setting the timer ensure that the clock is set correctly The timer will always be switched on after it has been set The timer will not start if a recording is in progress The volume of the timer will increase gradually from the minimum level to the last tuned volume level Press and hold CLOCKeTIMER for more than two seconds to select timer mode gt The last timer setting starts flashing gt TIMER starts flashing gt The selected source will be lighted and flashing Press CD TUNER or TAPE to select the desired source Before setting timer make sure the music source has been prepared CD Load the disc s To start from a specific track make a programme refer to CD Operation Programming the disc tracks TUNER tune to the desired radio station TAPE load the prerecorded tape into tape deck 2 Press ALBUM lt 4 gt gt on the system repeatedly to set the hour for the timer to start Press TITLE
36. w seconds later the current radio frequency will appear on the display O Press TUNER again to select the desired waveband FM or MW Press and hold ALBUM 44 gt gt until the 18 frequency indication starts to change then release gt The display will show SEARCH until a radio station with sufficient signal strength is found Repeat step O if necessary until you find the desired radio station To tune to a weak station press ALBUM lt lt b gt briefly and repeatedly until optimal reception found Storing preset radio stations You can store up to 40 preset radio stations in the memory Automatic Preset Programming Plug and Play setting refer to Basic Functions Plug and Play OR O Press TUNER to select TUNER mode To begin automatic preset from a desired preset number O Press TITLE K gt PRESET to select the desired preset number gt If a radio station has been stored in one of the presets it will not be stored again under another preset number O Press and hold PROGRAM until ALTO is displayed gt PROG starts flashing gt All available radio stations with sufficient signal strength will be stored automatically starting from FM and followed by MW band gt When all the available radio stations are stored or the memory for 40 presets are used the last preset radio station will be played To stop storing the automatic preset O
Download Pdf Manuals
Related Search