USE & CARE GUIDE - Summit Medical Refrigerators
Contents
1. and shut securely Appliance Care Cleaning a frost free appliance Use nonflammable cleaners Frost free means that you do not have to defrost your appliance Frost is removed by air moving and collecting any moisture and depositing it on the cooling coil The cooling coil periodically warms up enough to melt the frost and the water then flows down to the drain pan located behind the base grill where it is evaporated Complete cleaning should be done at least once a year Unplug appliance or disconnect power Remove all stored items plus shelves trays etc Wash the inside walls shelves and trays with a solution of mild detergent in warm water or 2 tbsp 26 g baking soda to 1 qt 0 95 L warm water e Do not use abrasive or harsh cleaners such as window sprays scouring cleansers flammable fluids cleaning waxes concentrated detergents bleaches or cleansers containing petroleum products on plastic parts interior and door liners or gaskets Do not use paper towels scouring pads or other harsh cleaning tools These can scratch or damage surfaces Rinse well and wipe dry with a clean soft cloth Use the appropriate cleaning method for the exterior finish Painted metal Wash exteriors with a clean sponge or soft cloth and a mild detergent in warm water Do not use abrasive or harsh cleaners or cleaners designed for stainless steel Dry thoroughly with a soft cloth For additional protection against damage to painted2. Push and hold the SET key for more than 3 seconds to change the set point value The value of the set point will be displayed and the snowflake LED will start blinking To change the SET value Push the UP or DOWN arrow to the desired setting The new setting will be memorized after 15 seconds provided no other keys are pushed NOTE The minimum and maximum range of your thermostat is preset and locked by us so it cannot easily be accidentally moved between freezer and refrigerator temperatures To reset this range lock either call us or find information on our website under Troubleshooting Traceable thermometer PLUS models This digital thermometer simultaneously displays TRACEABLE THERMOMETER maximum minimum and current temperatures The Max Min feature monitors and stores the highest and lowest readings since the battery was inserted or since the RESET button was last pressed The temperature sensor or probe is enclosed in a glycol filled bottle that you insert into the FRIDGE location to be monitored such as inside a refrigerator or freezer The thermometer itself ing hr ge Id can be attached to the door of the unit with the aCCuC magnet on the back or it can be placed ona convenient table or shelf Power to the Traceable Thermometer is supplied with a AAA lithium battery When it is inserted correctly all segments of the LCD display are temporarily activated When the battery needs to be replaced a
3. and vapors such as gasoline away g from appliances Failure to do so can result in fire explosion or death Location IMPORTANT Do not install the appliance near an oven radiator or other heat source nor in a location where the temperature will fall below 40 F 5 C Do not place in direct sunlight Check the strength of the floor before installing your appliance It should hold the weight of a fully loaded appliance Allow at least 4 10 cm of airspace at the top and on both sides of the appliance and also 4 between the back of the appliance and the wall If the appliance is going to be placed next to a wall leave extra Space on the hinge side so the door can open wider than its width NOTE Allow 4 10 cm clearance at the top and sides and a 1 0 64 cm clearance between appliances IF YOUR MODEL HAS THE LETTERS BI IN THE SUFFIX IT IS DESIGNED FOR BUILT IN USE AND REQUIRES ONLY MINIMAL CLEARANCES EXCEPT AT THE BACK WHERE AT LEAST 2 OF CLEARANCE SHOULD BE ALLOWED ALL FF590 AND SCFF510SWH MODELS ARE ALSO BUILT IN CAPABLE ib Electrical Shock Hazard Plug into a grounded 3 prong outlet Do not remove ground prong Do not use an adapter Do not use an extension cord Failure to follow these instructions can result in fire electrical shock or death Recommended grounding method A 115 Volt AC only 60 Hz grounded electrical supply with a 15 or 20 amp fuse or circuit breaker is required It is rec
4. appliance or reconnect power Loss of power After the power is restored unplug the appliance for 30 minutes to allow the refrigeration system to equalize During this time keep the door closed as much as possible Remember A full appliance stays cold longer than a partially filled one Moving the appliance Remove stored items and tape shelves drawers and trays in place Unplug the appliance Clean it thoroughly Tape the appliance shut and tape the electrical cord to the cabinet When you get the appliance to its new location refer to the Installation Instructions and Temperature Selection sections for information on installation and setting the controls erature Selection and Monitorin YOUR APPLIANCE MAY HAVE A MECHANICAL DIAL OR DIGITAL THERMOSTAT DIAL INSTRUCTIONS ARE BELOW DIGITAL INSTRUCTIONS ARE ON PAGE 11 Manual dial thermostat on most models Your refrigerator may be controlled with a thermostat knob located inside the unit towards the right hand corner Turn the knob clockwise from the STOP 0 position toward the higher numbers for colder temperatures C i f f j l O p f V i gt V Setting the Temperature e Higher settings on the knob higher numbers mean lower temperatures colder in all compartments of the appliance The temperature inside a refrigerator may even drop below 32 F Use higher thermostat sett
5. holding the keypad and cover to the appliance door SCFF510OSWH MED Series These frost free all freezers can be built in or free standing They do not require defrosting and have a digital thermostat LED lighting and a lock At the top of the unit is a cooling system that uses a fan to provide cold air For best operation do not block the air flow with contents FF6L FF7L FF28LWH FF511L FF521BL FF5S90SSHH FFAR2L FFAR10 FFAR21L FFAR24L SCR450L SCR500BL SCR600L SCR610BL PLUS amp MED Series SP6DS2D7 SP6DS7 SP6DSSTB7 MED Series only These models are all refrigerators no freezer compartment with automatic defrost All have cold plates on the rear wall and the coldest spots in the refrigerator will be in the rear and toward the bottom All have interior fans to promote even cooling In the rear bottom above the step there is a drain line to allow defrost water to exit the refrigerator Keep this drain line clear or icing inside the refrigerator will occur FF7 FF511L FF521BL and SCR series models have lights that are not door activated and are controlled by a rocker switch on the top right The light generates a small amount of heat so minimize the use of the light for best operation and energy savings FF6 models and FFAR10 models all have door activated lights Smaller models and drawer models do not have interior lights NOTE FF590 models with BI in the model number and all drawer units are designed for built in
6. metal exteriors apply appliance wax or auto paste wax with a clean soft cloth Do not wax plastic parts 6 Plug in appliance or reconnect power 7 Replace all containers Cleaning a cycle defrost or manual defrost refrigerator Cycle defrost models utilize a system where ice builds up on the rear wall and melts when the compressor is off Manual defrost models continually build ice on inner walls NEVER USE A METAL OBJECT TO REMOVE ICE FROM THE REAR WALL IF NEEDED USE A PLASTIC ICE SCRAPER OR A HAIR DRYER Clean surfaces using the same instructions as for frost free models For CSS Models completely stainless steel only use cleaners especially made for stainless steel Base grill some models only To Remove and Replace the Base Grill 1 Open the appliance door and remove the base grill by pulling down and out from the top Replace the base grill by putting the clips in the openings in the appliance panel Push in until the base grill snaps into place Changing the light bulb some models only NOTE Not all appliance bulbs will fit your appliance Be sure to replace the bulb with one of the same size shape base size and wattage You can purchase bulbs from www summitappliance com support 1 Unplug appliance or disconnect power Remove the light shield Most models do not require tools Replace the light bulb with an appliance bulb of the same wattage 2 3 4 Replace the light shield 5 Plug in
7. operation and need very little clearance on the sides and above the units All other models require at least 1 inch of airflow on the sides and above the units All models operate best when 2 inches is provided between the rear wall and the back of the unit FCL44 FS20L FS21L FS22L FS24L FS30L FS60ML FS407L FS408BL VT65ML PLUS amp MED Series Model FCL44 is a chest freezer all of the others are upright These are manual defrost all freezers No internal fans are present and ice will build up along the cooling coils Periodically defrost the ice recommended when the ice level reaches a thickness of 1 4 to 1 2 inch NEVER USE A METAL INSTRUMENT as you can damage the cooling coils which will void your warranty and often cannot be repaired To defrost disconnect from the power supply empty the contents provide a tray in the bottom to collect water and use a hairdryer or other source of warm air to melt the ice or leave the door open and the power off for 24 to 48 hours For built in BI models and clearance information see NOTE above CP35LL PLUS amp MED Series CT66 PLUS Series only These models are cycle defrost refrigerator freezers The freezers are designed to operate at O F 18 C suitable for medical or laboratory uses These models have dual evaporators to maintain separate temperatures in the freezer and refrigerator Defrost the freezer carefully as directed above for manual defrost The refrigerator section ope
8. replace appliance light bulbs or broken glass shelves Consumable parts such as filters are excluded from warranty coverage Damage resulting from accident alteration misuse abuse fire flood acts of God improper installation installation not in accordance with electrical or plumbing codes or use of products not approved by warrantor Replacement parts or repair labor costs for units operated outside the United States Repairs to parts or systems resulting from unauthorized modifications made to the appliance Expenses for travel and transportation for product service in remote locations The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions DISCLAIMER OF IMPLIED WARRANTIES LIMITATION OF REMEDIES CUSTOMER S SOLE ANDeEXCEUSIVE REMEDY UNDER THIS EIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO ONE YEAR WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FR
9. OM STATE TO STATE WARNING This product may contain chemicals known to the state of California to cause cancer or birth defects or other reproductive harm For more information visit www summitappliance com prop65 Chemicals known by the manufacturer to be present in this product in concentrations higher than threshold limits NONE FELIX STORCH INC 770 Garrison Avenue a C C u clid Bronx New York 10474 Phone 718 893 3900 For parts and accessory ordering Fax 844 478 8799 15 troubleshooting and helpful hints www summitappliance com visit www summitappliance com support January 2015
10. accuc ld by SUMMIT APPLIANCE USE amp CARE GUIDE PLUS Series REFRIGERATORS AND FREEZERS FOR GENERAL PURPOSE STORAGE MED MEDDT Series REFRIGERATORS AND FREEZERS FOR MEDICAL STORAGE If you need service or call with a question please have this information ready We advise you to keep this Use amp Care Guide in your possession Model Serial number Options added Date of purchase Dealer FELIX STORCH INC 770 Garrison Avenue Bronx New York 10474 www summitappiance com Model Numbers PLUS Models e FF6 FF7 FF28LWH FF511L FF521BL FFAR2L FFAR21L FFAR24L FF590SSHH PLUS Series All refrigerators with automatic defrost or frost free operation VT65ML PLUS Series Low temperature freezers FFAR10 PLUS Series Full size storage all refrigerators FS20L FS21L FS22L FS24L PLUS Series Compact all freezers 20 C CM411L CM421BL CP35LL CT66 S19LWH PLUS Series Compact refrigerator freezers FCL44 FS30L FS60ML FS407L FS408BL PLUS Series Compact and mid size storage all freezers SCR450L SCR500BL SCR600L SCR610BL PLUS Series Glass door all refrigerators MED MEDDT Models e FF6 FF7 FF28LWH FF511L FF521BL FF590SSHH FFAR2L FFAR21L FFAR24L MED Series All refrigerators with automatic defrost or frost free operation FFAR10 MED Series Full size storage all refrigerators SCR450L SCR500BL SCR600L SCR610BL SP6DS2D7 SP6DS7 SP6DSSTB7 MED Series Specialty al
11. airflow will be hindered and temperature and moisture problems may occur Always position contents to allow some airflow between shelves or baskets Allow the appliance to cool at least 6 to 8 hours before adding contents Allow 24 hours for temperature to stabilize NOTE When the appliance ts first started the compressor will run constantly until the appliance is cooled It may take 6 to 8 hours or longer depending on room temperature and the number of times the appliance door is opened After the appliance has cooled the compressor will turn on and off as needed to keep the appliance at the proper temperature For optimum temperature performance it is recommended that this unit be at least 30 full during use If you are only using this unit to store small loads we recommend adding some water bottles or freezer packs to ensure temperature stability The outside of your appliance may feel warm This is normal The appliance s design and main function is to remove heat from packages and air space inside the appliance The heat is transferred to the room air making the outside of the appliance feel warm In some models the condenser that gets warm is just inside the side walls making these walls warm to the touch ENERGY SAVING TIPS e The more airflow provided around an appliance the less energy it will use e lf your appliance requires manual defrosting keep ice build up to less than 1 2 e Keep doors open a minimum of time
12. amount of liquid dish soap over the adhesive with your fingers Rinse with warm water and dry Do not use sharp instruments rubbing alcohol flammable fluids or abrasive cleaners to remove tape or glue These products can damage the surface of your appliance When Moving Your Appliance Your appliance is heavy When moving the appliance for cleaning or service be sure to protect the floor Always pull the appliance straight out when moving it Do not wiggle or walk the appliance when trying to move it because floor damage can occur Clean Before Using After you remove all of the packaging materials clean the inside of your appliance before using it See cleaning instructions in Appliance Care Some upright models have leveling legs Level as necessary for best operation If your appliance has casters after moving into place lock the brakes on those casters supplied with brakes Always unlock before moving the appliance for cleaning Key Eject lock some models To lock or unlock the appliance you must hold the key in the lock while turning The lock is spring loaded so the key cannot be left in the lock If the key is lost contact your dealer or SUMMIT APPLIANCE for a replacement Always give the model and serial number of your appliance when requesting a replacement key Keys for most models can be ordered online at www summitappliance com support Location Requirements Keep flammable materials
13. ature Setting Press the HIGH LOW key TWICE then press MODE RESET to enter the Low Alarm temperature setting mode Use the Up and Down arrows to adjust the temperature accordingly Press MODE RESET ONCE to confirm the setting Thermometer alarm instructions cont d By default the low and high alarms should be audible To turn alarms on off Audible High Alarm Setting To make sure the high alarm is audible press HIGH LOW key ONCE to activate HI SET on the screen Then press the ALERT ON OFF key ONCE to activate the HIGH ALARM beeping sound Press again to deactivate Audible Low Alarm Setting To make sure that the low temperature alarm is audible press the HIGH LOW key TWICE to activate LOW SET on the screen Then press the ALERT ON OFF key ONCE to activate the LOW ALARM beeping sound Press again to deactivate NOTE For an activated high alarm and low alarm buzzer the display should indicate HI ALARM and LO ALARM as shown here More details about the features and usage of the Traceable Thermometer Alarm can be found in the User Manual accompanying the unit Factory set_ default password The factory set default password is 0123 If the default password is lost press the Wy key located inside the battery box for 30 seconds then wait for the warning sound which signifies the factory set default password has been restored To set the password While door is open press the WY key located inside the battery box until it j
14. battery symbol will flash on the display The temperature display can be switched between Celsius C and Fahrenheit F with a push of the C F button The display will alternate between refrigerator probe temperature and room temperature when you press the ROOM FRIDGE button Press RESET to clear the Max Min temperature record See instruction pamphlet for more information about the Traceable Thermometer Traceable thermometer alarm MED models Every MED unit is equipped with a Traceable Thermometer Alarm that simultaneously displays minimum maximum and current interior temperatures and provides a visual and audible signal when the temperature inside the unit falls outside the set temperature range The temperature sensor or probe is enclosed in a glycol filled bottle that you insert into the location to be monitored such as inside a refrigerator or freezer once the unit has been programmed The thermometer alarm itself can be attached to the door of the unit with the magnet on the back or it can be placed ona convenient table or shelf Power to the Traceable Thermometer Alarm is supplied with a lithium iron disulfide battery with a 10 year shelf life When it is inserted correctly the unit will beep and all segments of the LCD display will be temporarily activated Note that alarm temperatures will have to be reset after replacing the battery The temperature display can be switched between Celsius C and Fah
15. ingles enter the 0123 password then within 10 seconds to confirm Enter your password 1 16 digits then press again to confirm A total of 10 passwords can be set NOTE Each password starts with a number from 0 to 9 in order The first password starting with O is the default password For example use 1xxx then 2xxx etc for 10 users Changing password While the door is open press the Y key located inside the battery box until it jingles enter the old password and press within 10 seconds to confirm Enter the new password then press to confirm NOTE The first digit cannot be changed To open the door While the door is closed press the START END key enter the password then press START END again to confirm To lock door manually Press D Function setting of automatic lock Setting of the auto lock time Press the key inside the battery box enter a number any number between 10 99 then press to confirm The auto lock time can be set between 10 99 seconds after opening the door If the time is set less than 10 seconds the door will not lock automatically only manually Deleting the door opening passwords Press the START END key enter default password followed by 0000 then press and all the door opening passwords will be deleted except for the default password NOTE To access the battery box you need to remove only the two small screws on the top and bottom of that cover Do not remove the 4 screws
16. ings only when required or recommended When the ambient temperature is normal we recommend a medium seiting Changes of the ambient temperature affect temperature in the interior of the appliance so keep this in mind when choosing the seiting of the thermostat dial At STOP 0 position the appliance does not operate the cooling system is switched off but the power supply is not interrupted the light is on when you open the refrigerator door The temperatures in the refrigerator and freezer compartments also depend on how often you open the door In all small refrigerators and freezers without interior fans temperatures are coldest near the bottom and occasionally near the rear Place contents accordingly For optimum temperature performance it is recommended that this unit be at least 30 full during use If you are only using this unit to store small loads we recommend adding some water bottles or freezer packs to ensure temperature stability Digital thermostat on certain models If you find it necessary to change the temperature setting for your digital thermostat controlled appliance please refer to the following instructions The front panel of the thermostat is illustrated here sineling take UP amp DOWN arrows SET key To see the SET POINT Push and immediately release the SET key The display will show the SET POINT value Wait 5 seconds and the probe value will display again To change the SET POINT
17. l refrigerators drawers or glass doors CP35LL MED Series Compact refrigerator freezers FCL44 FS30L FS60ML FS407L FS408BL MED Series Compact and mid size storage all freezers VT65ML SCFF51O0SWH MED Series Low temperature freezers Built in frost free freezers FS20L FS21L FS22L FS24L MED Series All freezers 20 C Model numbers with DT indicate units having a Digital Thermostat Table of Contents Model Numbers Appliance Safety Proper disposal of an old appliance Installation Instructions Key Eject lock Location Requirements Location Recommended grounding method Leveling your appliance When using the appliance Energy saving tips Appliance Care Cleaning a frost free appliance Cleaning a cycle defrost or manual defrost appliance Base grill Changing the light bulb Loss of power Moving the appliance Temperature Selection and Monitoring Manual dial thermostat Digital thermostat Traceable thermometer PLUS models Traceable thermometer alarm MED models Keypad Lock Operation of Specific Models Troubleshooting Limited Warranty Appliance Safety Your safety and the safety of others are very important to us We have provided many important safety messages in this manual and on your appliance Always read and obey all safety messages You can be seriously injured or even killed if you don t follow instructions Safety messages will tell you what the potential hazard is how to
18. n the freezer or move the package so the door closes properly e Is the room temperature hotter than normal The motor will run longer under warm conditions At normal room temperatures the motor will run about 40 to 80 of the time Under warmer conditions it will run even more e Has a large amount of food just been added to the freezer Adding a large amount of food warms the freezer The motor normally will run longer to cool the freezer back down e Is the door closed completely Push the door firmly shut If it will not shut all the way see The door will not close completely later in this section e Are the condenser coils dirty on some models This prevents heat transfer and makes the motor work harder Clean the condenser coils e Is the door gasket sealed all the way around If not contact a qualified technician NOTE If the problem is not due to any of the above remember that the compressor on your new appliance will operate longer than your old one due to its high efficiency motor Temperature is too warm e Are the air vents blocked This prevents cold air movement Move objects away from the air vents e Is the door opened often Be aware that the freezer will warm when this occurs In order to keep the freezer cool try to get everything you need out of the freezer at once keep food organized so it is easy to find and close the door as soon as the food is removed e Has a large amount of food just been added to
19. ommended that a separate circuit serving only your appliance be provided Use outlets that cannot be turned off by a switch or pull chain Do not use an extension cord Leveling your appliance some upright models Locate the two front leveling legs that may be taped among the packing materials In many models these legs are already mounted into the underside of the appliance 1 Screw these legs into the front holes on the bottom of the appliance The back of the appliance rests on two fixed supports Built in models also have rear level legs that can provide more precise leveling Adjust the front legs just enough to lift the cabinet up off the floor Note If your model is equipped with front rollers the front legs should be lowered enough to lift the rollers off the floor to ensure the appliance does not roll forward when the door is opened Place a leveling tool on top of the appliance first side to side then front to back Turn leg counter clockwise to raise a corner Turn leg clockwise to lower a corner Repeat Step 4 until appliance is level After appliance is fully loaded recheck with level as in Step 4 If your appliance is Sp with casters the two front casters have brakes to prevent rolling Keep brakes locked and unlock for moving only When using the appliance In order to ensure proper temperature you need to permit proper airflow in the appliance Do not block off any air vents If the vents are blocked
20. rates in the normal range 35 to 45 F or 2 to 7 C and defrosts automatically For built in BI models and clearance information see NOTE above CM411L CM421BL S19LWH PLUS Series These models are manual defrost refrigerator freezers The freezers in these models are designed to operate at 25 F 4 C to keep ice frozen and not for medication or products needing colder temperatures Defrost carefully following directions above The refrigerator section will operate in the normal range 85 to 45 F or 2 to 7 C and is suitable for most refrigerated products For built in BI models and clearance information see NOTE above Troubleshooting Try these solutions first to avoid the cost of an unnecessary service call Your appliance will not operate e Has a household fuse blown or circuit breaker tripped Replace the fuse or reset the circuit breaker e Is the freezer defrosting on some models Recheck to see whether the freezer is operating in 30 minutes Your freezer will regularly run an automatic defrost cycle There is water in the defrost drain pan on some models e Is the freezer defrosting The water will evaporate It is normal for water to drip into the defrost pan e Is it more humid than normal When it is humid expect that the water in the defrost pan will take longer to evaporate The motor seems to run too much e Is there excessive frost or a package preventing the door from closing Defrost and clea
21. reduce the chance of injury and what can happen if the instructions are not followed IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire electric shock or injury when using your appliance follow these basic precautions Plug into a grounded 3 prong outlet Do not remove ground prong nor use a 3 2 adapter Do not use an extension cord Use care not to plug into outlets controlled by wall switches Disconnect power before servicing After servicing replace all parts and panels before operating Use nonflammable cleaners Keep flammable materials and vapors such as gasoline away from appliances Use two or more people to move and install appliance NOTE Drawer refrigerators are provided with anti tip brackets Always install prior to use Proper disposal of an old appliance Old appliances can represent a suffocation hazard to children Remove doors from your old appliance Leave shelves in place If an old appliance contains refrigerants it must be recycled by a licensed service or disposal company Installation Instructions i Excessive Weight Hazard Use two or more people to move and install your appliance Failure to do so can result in back or other injury ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS BEFORE TURNING ON TO ALLOW THE COMPRESSOR LUBRICANT TO DRAIN Remove packaging materials Remove tape and glue residue from surfaces before turning on the appliance Rub a small
22. renheit F by sliding the C F button located on the back of the unit Function of Controls MODE RESET Key Press ONCE to reset Max Min temperature record When the unit is sounding an alarm press ONCE to turn off the beeping sound HIGH LOW Key Press ONCE to display high alarm setting Press TWICE to display low alarm setting Press THREE TIMES to display current temperature reading ALERT ON OFF Key When the unit is sounding an alarm press ONCE to turn off However the High Alarm or Low Alarm will still flash until the temperature goes back to normal or the Low Alarm function is turned off Programming the Alarms The thermometer displays the internal temperature of the unit being monitored as well as the maximum and minimum temperatures reached The maximum and minimum readings reflect the highest and lowest temperatures since the battery was inserted or since the MODE RESET key was last pressed If the temperature rises above or falls below the set temperature range the alarm will sound By default the high alarm temperature setting is 8 C 46 4 F and the low alarm temperature setting is 2 C 35 6 F To reset these limits follow these instructions High Alarm Temperature Setting Press the HIGH LOW key ONCE then press MODE RESET to enter the High Alarm temperature setting mode Use the Up and Down arrows to adjust the temperature accordingly Press MODE RESET once again to confirm the setting Low Alarm Temper
23. the freezer Adding a large amount of food warms the freezer It can take several hours for the freezer to return to the normal temperature The door will not close completely or is difficult to open e Are food packages blocking the door Rearrange containers so that they fit more tightly and take up less space e Are the shelves or drawers out of position on some models Put the shelves and drawers back into their correct positions Limited Warranty ONE YEAR LIMITED WARRANTY FOR APPLIANCE Within the 48 contiguous United States for one year from the date of purchase when this appliance is operated and maintained according to instructions attached to or furnished with the product warrantor will pay for factory specified parts and repair labor to correct defects in materials or workmanship Service must be provided by a designated service company Outside the 48 states all parts are warranted for one year from manufacturing defects Plastic parts shelves and cabinets are warranted to be manufactured to commercially acceptable standards and are not covered from damage during handling or breakage 5 YEAR COMPRESSOR WARRANTY 1 The compressor is covered for 5 years 2 Replacement does not include labor ITEMS WARRANTOR WILL NOT PAY FOR 1 Service calls to correct the installation of your appliance to instruct you how to use your appliance to replace or repair fuses or to correct wiring or plumbing Service calls to repair or
Download Pdf Manuals
Related Search