Jenn-Air 48" Side-By-Side Built
Contents
1. NON DISPENSER Refrigerator Features Freezer Features e 2 Storage Drawers with e 2Ala Carte Storage Baskets ClimateZone Technology e Wire Elevator Shelf e A la Carte Storage Drawer e 2 Adjustable Wire Shelves e Spill Proof Rollout Elevator Shelf e 2 Tilt amp Store Door Baskets i e SpillProof Rollout Shelf e 4 Adjustable Door Bins e Full Width Adjustable Dairy Bin e Automatic Icemaker w Storage e 3 Adjustable Door Bins Drawer i DISPENSER Freezer Features e 2 A la Carte Storage Baskets e Wire Elevator Shelf Adjustable Wire Shelf e Tilt amp Store Door Basket Refrigerator Features e 2 Storage Drawer2. FIG lla 1 4 side panel fitted up to the cabinet trim top view on Freezer side FIG 1 4 64 Side Panel Freezer Side of Unit 1 4 side panel fitted up to the cabinet trim top view on Refrigerator side 1 2 1 27 Spacers on side of machine compartment 3 16 48 below the machine compartment 3 16 48 Spacers 1 4 64 Side Panel Refrigerator Side of Unit 11b FIG 11c Front Rear Side Panel 82 13 16 210 3 Dimensions Typ h 2 2 6 35 24 61 Toe Kick and Hinge Area A 2 7 16 6 19 20 INSTALLATION GUIDE SPECIAL CONSIDERATIONS Special Considerations FIG 12 The illustrations on this page may be useful to help you understand some of the situations you may face as you design and install the various models of Jenn Air Built In Refrigerators g Figures 12 14 demonstrate handle placement for the framed models Figure 14 also shows the optional handle extension as referenced by the stair stepped portion of the drawing FIG 14 Standard Handle Profile Framed Application 2 7 16 Standard Handle m 3 7 16 Optional Extended Handle FIG 13 Handle Clearance For Raised Panel TT Allow min of 2 5 16 Lee Optional Extended Handle Kit FIG 15 Figure 15 provides information for using a custom panel in the toe kickplate area on overlay or tramed models r Panel thicker than 3 16 Angled cut for thicker plat
3. DESIGN GUIDE BUILT IN REFRIGERATOR z JENN AIR FOR THE LOVE OF COOKING CONTENTS DESIGN OPTIONS 2 INTERIOR PACKAGE OPTIONS 4 SPECIAL FEATURES 5 MODEL SPECIFICATIONS 6 ACCESSORIES 7 INSTALLATION GUIDE 8 CUT OUT DIMENSION SPECIFICATIONS 9 PROPER POSITIONING 10 PANEL INSTALLATION 12 FRAMED PANELS 13 OVERLAY MODELS 14 SIDE PANELS 19 SPECIAL CONSIDERATIONS 20 WARRANTY BACK COVER 97 JENN AIR FOR THE LOVE OF COOKING Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dimensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry making cutouts or beginning installation THE JENN AIR BUILT IN REFRIGERATOR The Jenn Air Built In Refrigerator is the new choice in builtin retrigeration excellence for discriminating home owners a choice that s backed by the solid reputation of Jenn Air as a leader in the development of innovative kitchen solutions Now Jenn Air continues that tradition with a built in refrigerator that is setting new standards in style storage and performance Personalization is the guiding principle behind every aspect of the Jenn Air Built In Refrigerator design from its variety of exterior styling possibilities to adaptable choices in interior storage to performance that exceeds expectations It all begins with thr
4. m n 54 13 25 1 ATO 12304 68 1 8 m s ee 102 24 261 2 2220 8 3 4 r na GE 3 10 1271 8 21 4 30 20 141 4 175 90 69 1 4 P b 34 5 16 121 44 AF V37 6 E o dE A ALE 17 1 8 175 90 69 1 4 pach n 56 20 26 7 8 175 90 69 1 4 48 Wide Cabinet cm 117 48 ZA AS OF 5 08 36 83 17358 86 52 129 24 43 97 Ps Bols 66 20 753 30 cm 114 94 19 69 ANAS 5 08 36 83 173 04 86 52 22 24 41 43 173 04 0900 1 73 04 cm 117 48 ET 43 50 SZ 36 20 175 90 9 10 121 44 43 50 1290 68 26 175 90 NOTES 1 Use counter sink screws for attaching the backer panel to the front panel 2 On 42 custom panels watch location of handle mounting due to under cut of front panel 3 For freezer dispenser front panels remove fountain trim and tape to the backside of the backer panel Note recycle symbol should be visible and located at the bottom 4 You may want to remove any additional material on the backer panel when used in conjunction with a front panel Remove 1 32 on thickness and 1 2 wide of material on the inside surface of the backer panel This will help ease assembly of the panel assembly onto the door Backer Panel Thickness 1 4 0 64 cm Spacer Panel Thickness 0 100 0 25 cm If Raised Panel is Used Overall Front Panel Thickness Not to Exceed 1 1 4 3 18 cm INSTALLATION GUIDE OVERLAY MODELS Overlay Models The decorator panels for overlay models cover the door trim for a
5. 8PPFXDA JS42PPDFXA JS48SEFXDA JS42SEDFXFA JS48 CSFADA JS42CSFXDA JS48F FXDA JS42F FXDA 30 1 23 3 18 3 15 4 11 8 10 1 29 4 26 8 689 0 661 0 On framed models this letter indicates trim and handle color B black VWW white S silver etched Stainless steel models are available with stainless steel towel bar handles or Pro Style stainless steel towel bar handles with diamond etched grip ACCESSORIES These items may be ordered as additional components by visiting the accessory store at jennair com FREEZER COMPARTMENT Adjustable Door Bin Tilt amp Store Door Basket Adjustable Storage Shelf A La Carte Storage Basket Elevator Shelf REFRIGERATOR COMPARTMENT Elevator Shelf JENN AIR BUILT IN REFRIGERATOR ACCESSORIES SECTION PLACEMENT ACCESSORY KIT Shelving System Refrigerator Sealed Glass Shelf CJSA83SSWA Refrigerator Compartment Refrigerator Elevator Shelf CJS483ESWA 48 Refrigerator A La Carte Storage Drawer CJS483STWA Interior Door System Full Width Dairy Compartment CJS484PDSA models Refrigerator Adjustable Door Bin CJS484POSA Shelving System Freezer Adjustable Wire Storage Shelf CJS482SSWA Freezer Compartment Freezer Wire Elevator Shelf CJS482ESWA A La Carte Freezer Basket CJS482BKWA Interior Door System Freezer Adjustable Door Bin CJS481POSA Tilt amp Store Freezer Door Basket CJS481TOSA Shelving System Refrigerator Sealed Glass Shelf CJS423SSWA Refri
6. Trim Reveal 1 4 Trim Reveal 1 4 Framed models can accept either a framed panel or a custom Z decorator panel If the thickness of the framed panel to be a installed is less than 4 inch a sheet of shim material to build the Y 1 4 thickness total thickness to Zinch must be used Likewise if the framed k lia SS L panel is thicker than inch you must rout an edge around the N panel to ensure the panel fits properly This is illustrated in 4 Figures 6 and 7 FIG 6 FIG 7 Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dimensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry making cutouts or beginning installation INSTALLATION GUIDE FRAMED MODEL PANELS A 1 4 Framed Panel Specifications for Framed Models Jenn Air offers 42 inch and 48 inch dispenser and non dis penser models with the framed design The framed trim remains visible when using the tramed panel installation These models accommodate a 1 4 panel depth or less A Grille Panel W Width H Height B Freezer Dispenser Panel W Width W1 Width W2 Width H Height HI Height H2 Height C Freezer Non Dispenser Panel W Width H Height D Refrigerator Panel W Width H Height A Grille Panel B Dispenser Freezer Panel C D Non Dispenser Refrigerator Freezer Pane
7. cool and cultured stainless steel retrigerator to the distinctive appeal of our overlay design to the popular look of the tramed model Jenn Air has an option that will tit your client s dream kitchen perfectly see illustrations below Stainless steel models with beautiful wrapped doors come with your choice of inch diameter stainless steel towel bar handles or Pro Style handles with diamond etched grip Both styles feature a black toe kickplate Non dispenser models are available as well as dispenser models with a sleek black dispenser that enhances the professional look A heavy duty 1 1 inch stainless steel grille finishes the look Overlay models utilize custom panels to convey an elegant seamless appearance unique to each client s kitchen Since these models do not include handles you have the freedom to choose a practically unlimited array of handle styles to match or comple ment the hardware on surrounding cabinetry Non dispenser models or dispenser models with white or black dispensers are available The 11 inch grille at the top and toe kickplate at the bottom also accept custom made panels Framed models are offered with silver etched frame and handles black frame and handles or white frame and handles to complement the custom panels your client has chosen Attractive full length handles add sophistication to our framed models Dispenser and non dispenser framed models are available On dispenser models a black d
8. d and ordered When the unit arrives at the installation site make sure the installer checks the shipment carefully Each of the three design choices Stainless Steel Overlay and Framed has distinct installation requirements which means it is crucial that the unit delivered matches your space and planning requirements The shipping carton will be labeled with a model number that will describe exactly the size design handle style and color and whether the unit is a dispenser or nomdispenser model Note that the 4th position of the model number indicates the different styles See chart below for model number guide Installation instructions are shipped with each unit Follow those instructions when preparing the space uncrating the unit and when installing any Jenn Air Built In Refrigerator If you cannot locate the installation instructions call Jenn Air Customer Assistance tollfree at 1 866 459 6298 U S and Canada Or visit the Trade Professional section of jennair com to download complete instructions quickly and easily BUILT IN REFRIGERATOR MODEL NUMBER CHART Example shown for Model JS48FBDBDA J S 48 F B D B D A Brand Type Size Door Type Door Frame 8 Handle Dispenser Dispenser Trim Feature Package Eng Code J JennAir S Side bySide 48 Width F Framed B Black F Non Dispenser B Black D Deluxe A Series 42 Width S Stainless W White D Dispenser W White C Overlay S Silver Etched X NA P Pro Style E Sta
9. e are the ONLY warranties provided by the manufacturer This warranty gives you specitic legal rights and you may also have other rights that vary from state to state TO RECEIVE WARRANTY SERVICE WHAT IS NOT COVERED BY THESE WARRANTIES To locate an authorized service company in your area contact the 1 Conditions and damages resulting from any of the following Jenn Air dealer from whom your appliance was purchased or call Customer a Improper installation delivery or maintenance Assistance at the number listed below Should you not receive satisfactory b Any repair modification alteration or adjustment not warranty service please call or write authorized by the manufacturer or an authorized servicer Maytag Appliance Sales Company c Misuse abuse accidents or unreasonable use Attn Jenn Air CAIR Center d Incorrect electric current voltage or supply BRO Box 2370 e Improper setting of any control Cleveland TN 37320 2370 2 Warranties are void if the original serial numbers have been U S and CANADA 1 866 459 6298 removed altered or cannot be readily determined U S customers using TTY for deaf hearing impaired or 3 Light bulbs speech impaired call 1 800 688 2080 4 Products purchased for commercial or industrial use 5 The cost of service or service call to NOTE When writing about an unsolved service problem a Correct installation errors please include the following information b Instruct the user on proper use
10. e of the backer W Width 23 1 2 27 1 4 09 22 panel This will help ease assembly of the BON V Z panel assembly onto the door L o jo SPACER PANEL in cm A Grille Pane E ket W Wich 39 174 TAA Spacer Panel Thickness 0 1007 10 25 cm z alu Z da If Raised Panel is Used Overall Front Panel B Freezer Dispenser Panel M Thick N E d 1 1 4 3 18 W Width 15 1 4 44 45 ickness Not to Excee i cm W1 Width 2 5 08 W2 Widh 14177 36 83 H Height 68 1 8 173 04 H1 Height 34 1 16 34 1 16 86 52 H2 Height 48 178 122 24 C Freezer Non Dispenser Panel ee ee W Width 15 1 4 44 45 H Height 68 1 8 173 04 D Refrigerator Panel ee O W Width 221 2 52 15 20174 66 68 H Height 68 1 8 173 04 oj eee FRONT DECORATOR PANEL in cm AJ Grille Pane ph ae W Widih 40 174 117 48 H Height 8 3 4 22 23 B Freezer Dispenser Panel P M W Width 167 16 47 63 W1 Width 2 1 4 5 72 W2 Widh 14174 36 20 H Height 09 1 4 175 90 H1 Height 345 16 87 15 H2 Height AP AST VO 121 44 C Freezer Non Dispenser Panel ieee W Width EZL IO AVZS 47 63 H Height 69 1 4 175 90 D Refrigerator Panel mc ee W Width 233 4 DNS 2 69 85 H Height OF IIA 175 90 69 1 4 175 90 Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dimensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry making cutouts or beginning installa
11. ee distinct styling options our cool and cultured stainless steel model with stainless steel towel bar handles or heavy duty Pro Style handles with diamond etched grip our versa tile overlay model featuring the homeowner s choice of custom panels and handles or our elegant tramed model featuring custom panels offset by sleek trim and match ing handles Exterior customization continues with your clien s choice of a dispenser or non dispenser model Adaptable interior storage enables the client to create and recreate the space inside their retrigerator with ease Adjustable shelves and bins including Jenn Air Elevator shelves which can be moved up or down at the turn of a handle make customizing storage simple And a variety of interior components can be purchased as accessories at any time When it comes to performance the Jenn Air Built In Refrigerator excels The key to its superb performance edge is our Precision Temperature Management System This sophisticated multicomponent system is highlighted by our Variable Speed Compressor and storage drawers with ClimateZone technology two features which help ensure precise temperatures for outstanding food preservation The excellence of the Jenn Air Built In Refrigerator design is also evident in quality construction details like foamed in place doors that provide the best insulation and rigidity possible A tour square leveling system allows for each corner o
12. ensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry making cutouts or beginning installation INSTALLATION GUIDE CUT OUT DIMENSION SPECIFICATIONS TOP VIEW Exterior Dimensions in cm 48 STAINLESS STEEL 48 OVERLAY 48 FRAMED 42 STAINLESS STEEL 42 OVERLAY 42 FRAMED Model Numbers JS48PPDBDA JS42PPDBDA JS48PPFXDA JS4 2PPFXDA JS48 SEDBDA JS48CSD DA JS48F D DA JS42SEDBDA JS42CSD DA JS42F D DA JS48SEFXDA JS48CSFXDA JS48F FXDA JS42SEFXDA JS42CSFXDA JS42F FXDA n m NET 83 2127 83 2127 83 2127 83 83 83 2127 B Cutout Width 41 1054 C Cutout Depth 24 610 D listgitio Top Sh Cabine 83 210 9 83 2109 83 210 9 83 210 9 E Height to Top of Grille 83 211 8 E Width cabinet 41 1048 G Width doors closed EO M6 48 Ne AJ 42 6 106 8 42 Ea 8 426 1068 H Depth Exel Handles closed 25 M 25 641 25 641 25 641 25 641 Depth Incl Handles closed JS485 26 67 6 26 67 0 js48s 26 67 2 26 67 0 Js48P 27 68 9 Js48P 27 68 9 J Depth fresh food door 22 1395 O26 1 52 a IS 48 123 8 45 123 8 48 123 8 open 907 K Width doors open 90 Js48s 50 128 9 N A 50 127 611 5425 44A 137 N A AAw 112 411 including handles j 48P 5 4 131 8 Js42P 45 116 5 1 4 vertical adjustment for leveling and height adjustments Add 1 2 5 cm to depth I for extended handle ki
13. es va S DIA 1 4 TYP 1 8 TYP lt Cut out for Dispenser Allow relief here for dispenser models with panels thicker than 3 16 Handle Considerations for Overlay Models If the customer has specified a Jenn Air Built In Refrigerator Overlay model the unit will be shipped without handle hardware Handle hardware that the customer has specified to match the overall decorating scheme must be provided separately at the job site Before installing the custom panel assembly the custom handle hardware must be installed It is recommended that handles with larger D style pulls be used If the screws that are used have thick heads the screws will need to be countersunk into the panel before it is put into place A Three 3 16 holes may be used to attach panel to cabinet 48 46 7 8 42 40 7 8 IMPORTANT TIP Jenn Air advises not using single pull knobs on Built In Refrigerator Overlay models WT UW o Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dimensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry making cutouts or beginning installation INSTALLATION GUIDE SPECIAL Figures 16 and 17 let you see what considerations you need to make for any cust
14. f the refrigerator to be adjusted from the front of the unit for easier and more precise leveling And the acoustic design of our ultra quiet premium sound package ensures incredibly quiet performance You ll also find that our Built In Refrigerator is backed by one of the best warranties in the industry The Jenn Air Built In Refrigerator Warranty provides parts and labor coverage for a full three years trom the original pur chase date A five year parts and labor warranty and a six through twelve year parts warranty covers major refrigeration components including the compressor evaporator condenser drier and connecting tubing This Design Guide outlines the unique features of the Jenn Air Built In Refrigerator and provides general guidelines tor a smooth installation process Complete installation instructions are shipped with each unit Refer to these instructions when preparing and installing all Jenn Air products Should you have unique design con siderations or installation questions you can easily access comprehensive technical assistance and support by calling Jenn Air at 1 866 459 6298 Service hours are 8 a m 8 p m Monday through Friday and 8 a m 5 p m on Saturday ET DESIGN OPTIONS Refrigerators That Satisfy A World of Individual Preferences Jenn Air Builtln Refrigerators offer a variety of models with design options and interior options that can easily be personal ized tor each client From our
15. fig 12 and fig 13 on page 20 for more information B Dispenser Freezer Panel This application is often accomplished by using three panels the decorative front panel a spacer panel of 10 inch thickness and a 1 4 inch backer panel Other options to achieve C D this look such as using one Pan ee m panel routed for different dimensions may be avail able from your cabinet manufacturer H2 Jenn Air offers 42 and 48 dispenser and non dispenser models with the framed design Refer to page 20 for toe kickplate panel information It installing side panels refer to page 19 A Spacer Panel SK XS Front Decorator Panel 3 4 Max 3 4 Max kary lt 10 1I 1 4 10 7 e Spacer Panel Backer Panel va Z7 7 ZZZ 7 FIG 9 FIG 8 Figure 8 shows a cross section view of the three panel Figure 9 gives a rear view of the three panel assembly and assembly indicating the placement of the door grille trim important dimensions that are standard for framed and overlay models For routed panel applications the backer panel dimen sion should not exceed 4z inch thickness Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dimensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry ma
16. gerator Elevator Shelf CJS423ESWA Refrigerator Compartment Refrigerator A La Carte Storage Drawer CJSA23STWA Interior Door System Full Width Dairy Compartment CJS424PDSA 42 Refrigerator Adjustable Door Bin CJS424POSA Shelving System Freezer Adjustable Wire Storage Shelf CJS422SSWA models Freezer Wire Elevator Shelf CJS422ESWA Freezer Compartment A la Carte Freezer Basket A22BKWA Interior Door System Freezer Adjustable Door Bin CJS421POSA Tilt amp Store Freezer Door Basket CJS421TOSA 40 Grille Compartment Filter UKFZ003AXX k Exterior Door Extended Handles Silver Etched Extended Handle CJSF1 5EHSA 48 White Extended Handle CJSFI5EHWA modele Black Extended Handle CJSF15EHBA Framed models come with full length handles Extended Handle Kits are available to allow additional hand clearance when installed panels are thicker than inch IMPORTANT TIP When raised panels thicker than 1 4 inch are used on framed models handle extensions may be necessary to provide finger clearance under the handle Extended handle kit numbers are included in the chart above Refer to the full scale Handle Profile drawing on page 20 of this section INSTALLATION GUIDE GENERAL CONSIDERATIONS Even though Jenn Air Built In Refrigerators are available in a wide range of design styles and configurations the basic installation planning information for all models have things in common After the decision has been made to install a Jenn Air Buil
17. he upper cover 3 8 Front Leveler Rear Leveler 3 Phillips Screws FIG 5 1 1 4 vertical adjustment for leveling and height adjustments Drill 3 holes through vertical frame into cabinetry where applicable approx location Optional If you are attaching the unit to cabinetry drill three 6 holes through both outer trims Drill s pilot holes into the cabinetry Install screw Additionally It the depth height of opening is excessive use the steel hanger strap Double over strap at the anchor points to secure cabinet INSTALLATION GUIDE PANEL INSTALLATION Integrating the Refrigerator Into Kitchen Cabinetry If the customer has chosen a stainless steel model it will arrive complete with wrapped stainless steel doors and stainless steel towel bar or Pro Style handles You will not have to install panels Jenn Air offers 42 inch and 48 inch dispenser and non dispenser models with the stainless steel design Framed or Overlay models require the installation of custom or decorative panels to give the retrigerator the personalized look the consumer has chosen for their kitchen Framed models are shipped with full length extended handles see below Overlay models are designed to use the custom hardware the consumer has chosen separately handles are not included with this type of product AIT F d M d Framed Panels 1 4 thick or less Framed Raised Panels thicker than 1 4 rame oaeis
18. inless Steel Handles P Pro Style Handles INTERIOR PACKAGE OPTIONS The flexible interior design of the Jenn Air Built In Refrigerator enables customers to create and recreate the space inside to meet their individ ual food storage needs Personalization begins with our modular design package which features our most popular configuration of interior storage options Personalization of these options can continue a day a month or even years atter the original purchase with the ability to purchase additional shelves storage drawers and more That means the refrigerator never stops adapting to your clients changing needs Even the interior styling is a cut above The design is clean and uncluttered Touches of gleaming chrome bring sleek order to interior stor age And bright even lighting illuminates every detail The design package is available in a 42 or 48 width with or without a Touch Sensor Ice and Water Dispenser All of the interior design package features listed below except ClimateZone Storage Drawers automatic icemaker and Touch Sensor Ice and Water Dispenser may be ordered as accessories at any time by contacting your Jenn Air dealer calling 1 800Jenn Air or visiting the accessory store at jennair com To explore interior storage and exterior style alternatives visit the online Design Your Own configurator at jennair com
19. ion Components Sixth Through Twelfth Year After the fifth year from the date of original retail purchase through the end of the twelfth year the manufacturer will repair or replace at its option free of charge for the part itself any part of the sealed refrigeration system consisting of the compressor evaporator condenser drier and connecting tubing which fails in normal home use with the owner paying all other costs including labor mileage and transportation Limited Warranty PuriClean Water Filter With regard to the water filter cartridge any part of the water filter cartridge which fails due to a defect in workmanship or materials will be replaced for a period of thirty days from the date of original purchase This is a full 30 day warranty and during this warranty period we will also provide tree of charge all labor and in home service required to replace the detective part PLEASE NOTE The full warranty and the limited warranties apply when the refrigerator is located in the United States or Canada Refrigerators locat ed elsewhere are covered by the limited warranties only including parts that fail during the first three years Limitations of Liability The warrantor shall not be liable for any incidental or consequential damages including food loss Some states do not allow the exclusion or limitation of consequential damages so the above limitation or exclusion may not apply to you The specific warranties expressed abov
20. ispenser comes on models with silver etched or black trim and handles while a white dispenser comes on models with white trim and handles An 11 inch grille at the top and a toe kickplate at the bottom also accept custom panels STAINLESS WITH DISPENSER shown with stainless steel towel bar handles Pro Style model also available OVERLAY WITH DISPENSER panels and handles not included FRAMED WITH DISPENSER panels not included includes extruded handles g jENNARR a JET ATE dk o i Stainless steel and dispenser Overlay decorator panel Framed 1 4 panel and dispenser and dispenser Touch Sensor Ice and Water Dispenser with sleek backlit design provides a distinctive look for BuilHn Refrigerator dispenser models The PuriClean filtration system delivers fresh filtered water and crushed or cubed ice anytime and Touch Sensor controls activate with just a light touch Stainless steel models feature a black dispenser surrounded completely by the stainless steel of the door Framed models can accept a freezer panel that tits around all sides of the dispenser Or you may choose a custom decorator freezer panel to blend perfectly with your cabinetry framed or overlay models Installation Considerations Before the builtin refrigerator is installed it is important to make sure the unit shipped matches the exact design that you have specitie
21. king cutouts or beginning installation INSTALLATION GUIDE FRAMED MODEL PANELS BACKER PANEL A Grille Panel W Width H Height B Freezer Dispenser Panel W Width W1 Width W2 Width H Height H1 Height H2 Height C Freezer Non Dispenser Panel W Width H Height D Refrigerator Panel W Width H Height SPACER PANEL A Grille Panel W Width H Height B Freezer Dispenser Panel W Width W1 Width W2 Width H Height HI Height H2 Height C Freezer Non Dispenser Panel W Width H Height D Refrigerator Panel W Width H Height FRONT DECORATOR PANEL A Grille Panel W Width H Height B Freezer Dispenser Panel W Width W1 Width W2 Width H Height HI Height H2 Height C Freezer Non Dispenser Panel W Width H Height D Refrigerator Panel W Width H Height 42 Wide Cabinet In 40 1 4 8 3 4 15 1 16 2 1417 2 69 1 8 34 O 48 1 8 tsa Palle 69 1 8 22 5 10 69 1 8 39 1 4 Z oja jd O 2 14 1 2 68 1 8 24 1 16 48 1 8 ANZ 10 68 1 8 2h S O 68 1 8 in 40 1 4 8 3 4 14 778 21 4 141 4 69 1 4 34 5 16 47 13 16 4 770 69 1 4 22 1 9 69 1 4 cm In ee ne 102 24 46 1 4 2220 8 3 4 mm lt 36 20 123716 90709 141 2 17558 69 1 8 86 52 34 1 16 22 24 48 1 8 E lt oj ooo 36 20 ZS 17558 69 1 8 lt eee 20 07 20 VO 175 58 69 1 8 PK xxx fak 45 1 4 19 69 32 2 o BOLL Z O Z 16 30 83 21 2 173 04 68 1 8 86 52 34 1 16 12272 48 1 8 m ae 35 98 16 5 1 ASA 68 1 8
22. l Panel Refer to page 20 for toe kickplate panel information If installing side panels refer to page 19 z s 42 Wide Cabinet 48 Wide Cabinet A CAUTION in cm Tr ON Refrigerator Panel Weight Not to Exceed 401 4 102 24 46 1 4 117 47 20h 22 36 kg 8 3 4 22 23 8 3 4 22 23 Total Freezer Panel Weight Not to Exceed E 33 b 1496 kg 15 1 16 38 26 17 5 16 43 97 Grille Panel Weight Not to Exceed 22 b 2 5 08 een S 14 1 2 30 8 3 14 1 2 56 83 69 1 8 75 38 69 1 8 54 5 gt 94 1 16 86 52 94 1 16 86 52 48 1 8 22 24 48 1 8 122 24 a ee 5 1716 38 26 15 16 43 97 69 1 8 175 58 69 1 8 175 58 225 16 56 67 26 1710 66 20 69 1 8 175 58 69 1 8 175 58 Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dimensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry making cutouts or beginning installation INSTALLATION GUIDE FRAMED MODEL PANELS B Decorator Panel Specifications for Framed Models A Grille Panel Decorator panels for framed models cover the door trim for an attractive seamless look that tlows into the overall design of the room Framed models include full length extruded handles unlike overlay models Attention must be paid to hand clearance or the depth of space between the decorator panel and the builtin han dle See
23. lack JS42FSDBDA Black Black JS42FBDBDA White White JS42FWDWDA NON DISPENSER Silver Etched Non Dispenser JS42FSFXDA Black Non Dispenser JS42FBFXDA White Non Dispenser JS42FWFXDA DISPENSER MODEL INTERIOR CAPACITIES STAINLESS STEEL MODELS with Pro Style handles STAINLESS STEEL MODELS with stainless steel towel bar handles OVERLAY MODELS FRAMED MODELS Interior Capacities cu ft Total Volume Refrigerator Compartment Volume Freezer Compartment Volume Total Shelf Area sq ft Kilowatt Hours Per Year NON DISPENSER MODEL INTERIOR CAPACITIES STAINLESS STEEL MODELS with Pro Style Handles STAINLESS STEEL MODELS with stainless steel towel bar handles OVERLAY MODELS FRAMED MODELS Interior Capacities cu ft Total Volume Refrigerator Compartment Volume Freezer Compartment Volume Total Shelf Area sq ft Kilowatt Hours Per Year 48 MODELS 42 MODELS JS48PPDBDA JS42PPDBDA JS48SEDBDA JS48CSD DA JS48F D DA JS42SEDBDA JS42CSD DA JS42F D DA 48 MODELS 42 MODELS On overlay models this letter in the model number indicates dispenser color B black W white On framed models the first letter indicates trim and handle color B black We white S silver etched while the second letter indicates dispenser color B black VW white Stainless steel models are available with stainless steel towel bar handles or Pro Style stainless steel towel bar handles with diamond etched grip JS4
24. lt amp Store Basket makes loading and retrieving items easier Provides secure storage for items that tend to shift or slide such as bagged vegetables and coffee beans A La Carte Freezer Basket his storage basket pulls out like a drawer providing easy access to items inside A glass front framed in crisp white provides a clean uncluttered look and makes it easy to identity items inside PuriClean Ice and Water Filtration System The Jenn Air PuriClean System provides tresh filtered water to the automatic icemaker on non dispenser models and to the icemaker and Touch Sensor Ice and Water Dispenser on dispenser models Precision Temperature Management System The Jenn Air Built In Refrigerator features an integrated cool ing and control system that runs the refrigerator with superior intelligence This multicomponent system automatically adjusts to the customers usage patterns to keep the tempera ture in both the fresh food and freezer compartments within one degree of the set temperature for better food preserva tion and outstanding energy efficiency Variable Speed Compressor The Jenn Air Variable Speed Compressor operates at just the right speed to main tain steady temperatures inside the fresh food and freezer compartments This minimizes the damaging temperature swings that can occur in other refrigerators even those with dual compressor systems to keep air consistently cool from top to bottom Elec
25. n attractive seamless look that flows into the overall design of the room This application is often accomplished by using three panels the decorative front panel a spacer panel of IO inch thickness and a inch backer panel Other options to achieve this look such as using one panel routed for different dimensions may be available from your cabinet manufacturer Jenn Air otters 42 inch and 48 inch dispenser and non dispenser models with the overlay design Decorator Panel Specifications for Overlay Models See Illustration on page 14 42 Wide Cabinet 48 Wide Cabinet NOTES BACKER PANEL in 2m in om 1 Use counter sink screws for attaching the A Grille Panel la backer panel to the front panel W Width 40 1 4 IZA 2 On 42 custom panels watch location of H Height 8 3 4 22 23 handle mounting due to under cut of front B Freezer Dispenser Panel a ee panel W Width 161 4 46 99 3 For freezer dispenser front panels remove W1 Width 2 gt 08 fountain trim and tape to the backside of w2 Width 14 1 2 90 83 the backer panel Note recycle symbol H Height 69 1 8 179 98 should be visible and located at the H1 Height 34 1 16 34 1 16 86 52 ee H2 Height 0 P 4 You may want to remove any additional CI Freezer NonDispenser Panel o material on the backer panel when used in W Width 16 1 4 41 28 46 99 conjunction with a front panel Remove H Height 69 1 8 ae 1 32 on thickness and 1 2 wide of D Refrigerator Pane bo material on the inside surfac
26. nstall the panel on the grille remove the screws on the top and bottom of the upper cover FIG 10c DO NOT REMOVE the foam 4 Slide the panel into place and replace screws FIG 1049 If the thickness of the panel is less than a 1 4 back it up with a sheet of shim material to obtain a 1 4 thickness Cardboard backer is recommended for Stainless Steel application For panel size refer to pages 3 16 A CAUTION Do not drive screws or sharp objects into door panels Do not pinch door handle ar Grille Panel 1 7 M FIG 100 FIG 10c lt a Pull Tape Away from Door Approximate Position lt For Screws A CAUTION When attaching a raised wood panel of 1 2 or thicker secure the raised panel to the back of the grille cover frame Use 4 8 or similar screws FIG 10b See illustration for approximate locations FIG INSTALLATION GUIDE INSTALLING PANELS ON DISPENSER MODELS Freezer Dispenser Panel Installation 1 Power switch needs to be off Switch located in machine compartment area see User Guide 2 Remove magnetic strip on door handle Use of tape may be required removing the magnetic strip See FIG 10a on page 17 3 Remove four Phillips screws to remove door handle trim See FIG 10b on Control Panel l I I 1 I gt nti y Stainless Steel Splashguard y Refer to numbered illustrations for steps 4 10 4 Rem
27. o each customers needs and usage patterns Here are just a few of the unique features that set the Jenn Air Built In Refrigerator apart Storage Drawer with ClimateZone Technology Every Jenn Air Built In Refrigerator has two generously sized storage drawers with ClimateZone technology This break through in fresh food storage provides specialized tempera ture control for fresh produce citrus items and fresh meat poultry and seatood With the touch of a button the draw ers automatically adjust to the ideal temperature for the type of food stored inside them and consistently maintain the temperature for optimum freshness Elevator Shelf This Jenn Air teature enables your client to customize the shelt storage space in both the tresh food and treezer compartments in seconds without having to move a thing Shelves raise and lower by simply turning a handle A La Carte Storage Drawer ldeal for storing cheeses snack foods and small jars this enclosed storage drawer also provides a protected area for delicate items like fresh herbs Generous size helps keep the space inside the refrigerator neat and organized Full Width Dairy Compartment he full width design of this covered compartment provides a roomy storage area tor butter and other spreadables Unique open shelt above the compartment provides bonus space for jars and other small items Tilt amp Store Freezer Door Basket The tiltout design of the Ti
28. of the product a Your name address and telephone c Transport the appliance to the servicer b Model number serial number and revision number 6 Consequential or incidental damages sustained by any person found on the top front interior of the refrigerator as a result of any breach of these warranties compartment Some states do not allow the exclusion or limitation of consequential or c Name and address of your dealer and the date ee l incidental damages so the above exclusion may not apply the appliance was bought d A clear description of the problem you are having NOTE Some Reverse Osmosis home water systems cause low water pressure Low e Proof of purchase sales receipt water pressure can affect the water and ice dispensing system by causing small or hollow ice cubes and slow water flow from the dispenser Service problems related to the home s Reverse Osmosis water system are not covered by the warranty User s Guides service manuals and parts catalogs are available from Customer Assistance 97 JENN AIR jennair com 403 West Fourth Street North Newton IA 50208 U S amp Foreign Patents amp Patents Pending Specifications subject to change without notice For a dealer near you visit jennair com or call 1 866 459 6298 102JIX 6 04 2004 Maytag Appliances
29. om panel applications and how they may interact with adjacent cabinets and or countertops Also refer to the Installation Guidelines tor Framed and Overlay models on pages HH CONSIDERATIONS 90 Door Stop Both doors are designed to open 135 To restrict one or both doors to a 90 opening use the door stops supplied in this kit 90 Door Opening Top View Cabinet Trim 23 7 8 to Rear of Cabinet Door Closed a 1 2 fap 1 1 4 11 2122 H I 21 45 H 21 2 2 3 4 H 3 TIT 3 1 4 3 1 2 Lower Hinge Plate Mounting 90 Door Hole Stop With the doors closed screw a door stop into the underside of the lower hinge plate as illustrated above FIG 18 Tool Requirements Tape measure Panel EERS Level Stud finder zr SANS Drill with various bits o Socket set FIG 16 Utility knife Magnetic extended screwdriver Phillips screwdriver Torx bit Cardboard carpet remnant or other protective material for flooring 135 Door Opening Steel hanger strap Top View Installation Checklist 1 8 INSTALLER 1 Door Closed Doors LI Handles are solidly attached to doors LI Doors seal completely to refrigerator cabinet L LI Assure correct door handle alignment framed models TN S OY m Assure door seals are not pinched x M LI Do no
30. ove the spill tray grille trom the fountain 5 Remove the two 15 Torx machine screws which retain the stainless steel splashguard Remove the splashguard 6 Remove the two 15 Torx long plastic screws that retain the fountain control Spill Tray Grille panel Longer screws Slide control panel down to remove Disconnect the electrical terminals going to the fountain control panel Tuck dispenser terminal inside to avoid interference 7 Remove the four 15 Torx plastic collar screws from the fountain escutcheon collar 8 Place the fountain escutcheon collar onto the backer panel Use tape to hold in place 9 Open the treezer door and slide panel onto the door 10 The holes in the fountain escutcheon collar should line up with the mounting holes in the door panel Reverse instruc tions 7 to 1 lex Replace the tour 15 Torx plastic collar screws from the fountain escutcheon collar INSTALLATION GUIDE SIDE PANELS Installing Side Panels If using side panels with the Jenn Air Built In Refrigerator they will need to be Minch thick Slide the panel into position and secure with screws indicated by the shaded area FIG 11a A sinch spacer is required between the cabinet and side panel FIG 1 1b A inch thick by 10 inch tall spacer is required if the side panel extends up into the machine compartment area on the refrigerator side FIG 1 1c iW M
31. s with ClimateZone Technology e Ala Carte Storage Drawer e SpillProof Rollout Elevator Shelf e SpillProof Rollout Shelf 2 Adjustable Door Bins Full Width Adjustable Dairy Bin Automatic Icemaker e 3 Adjustable Door Bins e Touch Sensor Ice 8 Water Dispenser SPECIAL FEATURES There s never been a refrigerator like the Jenn Air Built In Refrigerator Ever Because the design of this refrigerator is deter mined exclusively by you and your client Distinct styling options offer virtually unlimited design possibilities Flexible interior storage can be completely customized trom the selection of storage options at the time of purchase to shelves that adjust instantly at the turn of a handle Even the performance features are designed to adapt t
32. t if used on framed model TT Add 2 5 08 cm to width K for extended handle kit if used on framed model Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dimensional specifications are provided for planning purposes only For complete details see installation instructions packed with product before selecting cabinetry making cutouts or beginning installation INSTALLATION GUIDE PROPER POSITIONING Blocking and or Anchoring the Refrigerator If there is a solid soffit above the unit and the clearance is 1 or less you will not need to block the unit For installations with clearances of more than 1 FIG 3 you must use the anti tip ping 2 x 4 and brackets provided FIG 4 More than 1 Clearance Use the antitipping kit provided with the shipping crate Locate and mark the two wall studs behind the unit Mark where the L brackets and 2 x 4 will be located and drill 2 pilot holes 4 locate the proper height to clear the unit The space between the top of the unit and bottom of the wood block must not exceed 4 Secure the U brackets using the provided screws into the wall studs Make sure the screws will extend into the wall studs Align the pilot holes with the U brackets and secure the 2 x 4 with the screws provided FIG 4 More than an 1 i FIG 3 Adjust Door Hinges Check to make s
33. t In Refrigerator be sure to review the installation require ments for the model design chosen Make sure the opening where the unit will be installed is properly prepared Refer to Figure 1 Also check placement tor electrical outlet and water line as shown in Figure Front View 48 121 9 47 1 2 120 7 gt 42 106 7 41 1 2 105 4 gt Side View Electrical supply needs to be located in this area 48 121 9 42 106 7 83 3 4 2127 gt gt 6 A II 21 762 Water supply needs to be F FIG located in the shaded area For the door to open properly it must be able to open at least 90 degrees For installation in a corner a 2 inch filler strip is required to ensure the 90 degree opening Be sure to add the filler strip width to your finished rough in dimension The floor under the refrigerator has to be level with the surround ing floor To protect the floor when moving the refrigerator place cardboard or better yet a carpet remnant with the backing placed up on the floor IMPORTANT TIP Refer to the illustrations at the end of this section for details on door openings and filler size alternatives Electrical Connection This appliance is designed to operate on a normal 115 volt 15 amp 60 cycle line There should be a separate grounded cir cuit serving this appliance only Do not use an extension cord Do not use any device that will alter the electrical performance of
34. t drive screws sharp objects into the doors Z Z Door Open l SUS 135 Leveling AL E L Brackets are secure to 2x4 wood block IX I Stabilizing legs are against floor Cabinet is secure A LI Toe kickplate is properly attached to refrigerator and FIG 17 aligned with floor Ice Maker LI Water supply to refrigerator is turned on and lines flushed I Water leaks are not present at connection between house hold water supply and refrigerator m lcemaker arm is down for ice production I PuriClean Ice and Water Filtration System is installed correctly if applicable L Purge water from the fountain on dispenser models 21 JENN AIR BUILT IN REFRIGERATOR WARRANTY Full Three Year Warranty For three 3 years from the date of original retail purchase any part which fails in normal home use will be repaired or replaced free of charge Icemaker when supplied with the refrigerator the icemaker will be considered part of the refrigerator for warranty purposes Limited Five Year Warranty Major Refrigeration Components For five 5 years from the date of original retail purchase any part of the sealed refrigeration system consisting of the compressor evaporator condenser drier and connecting tubing which fails in normal home use will be repaired or replaced at the manufacturer s option free of charge Mileage and transportation charges if required shall be the responsibility of the owner Limited Warranty Major Refrigerat
35. this appliance For the placement ot the electrical outlet refer to Fig 1 Do not use a ground fault circuit interrupter Plumbing Requirements e Rough in the water line for the location FIG 1 e Connect a inch copper line to the house water supply in compliance with local codes and ordinances e Use a shutoff valve between the refrigerator and water supply The shutoff should be a drilled saddle valve Do not use a selftapping valve e The icemaker operates on 30 to 120 PSI e Route the water line within inch of the wall and no higher than 3 from the floor Allow at least 3 foot of excess copper tubing outside the wall tor easy connection to the water valve IMPORTANT TIP In homes with a Reverse Osmosis water treatment system remove the water inlet connector trom the yellow valve and attach to the blue valve Make sure the water filter bypass plug is in place Uncrating the Unit Uncrate the unit Remove the lower shipping bolts and brackets Slide the unit off of the crate base Remove and save the lower toe kickplate antitipping brackets and mounting hardware FIG 2a Remove the upper cover this will helo when moving the unit FIG 2b TOOLS NEEDED a Grille Panel 3 8 a 4 z REMOVE KICKPLATE REMOVE SCREWS FIG 2b Important Because of continuing product improvements Jenn Air reserves the right to change specifications without notice Dim
36. tion INSTALLATION GUIDE DECORATOR PANELS Installing Decorator Panels Be aware that panels used on refrigerators with the framed or overlay design have the potential for coming into contact with adjacent cabinets and or countertops when the refrigerator doors are opened You will want to be mindful of the surrounding cabinetry and space limitations when planning for decorator panels Refer to the 90 door stop information in Figure 18 on page 21 Grille Panels A CAUTION Do not exceed the panel dimensions shown in A decorator grille panel that matches the decorator door panels the charts on pages 15 and16 for the grille panel It the decorator may be used to replace the standard grille shipped on the panel is larger than specitied it may restrict the airflow to the unit This allows the retrigerator to integrate completely into compressor and condenser area which may cause the unit to the surrounding cabinetry tunction improperly Installation of Panels Framed or Overlay Models 1 Begin by removing the door handle or trim piece A magnetic backed molding hides the handle or overlay trim screws Use the adhesive side of the packaging tape on the magnetic backed molding to pull it away trom door FIG 10a 2 Remove the screws with a philips screwdriver FIG 10b Slide the panel into position The panel needs to be under the trim Install the handle Replace the molding in the channel and reset the magnetic backed molding 3 To i
37. tronic Control Center Digital controls with Touch Sensor technology activate easily with just a light touch Easy to read control panel includes a temperature display water filter indicator door ajar alarm and power interrupt indicator MODEL SPECIHEAONS JENN AIR BUILT IN REFRIGERATOR MODELS SIZE STYLE TYPE HANDLE amp TRIM COLOR DISP COLOR MODEL 48 STAINLESS STEEL DISPENSER Pro Style Handle No Trim Black JS48PPDBDA models NON DISPENSER Pro Style Handle No Trim Non Dispenser JSA8PPFXDA DISPENSER Stainless Steel Handle No Trim Black JS48SEDBDA NON DISPENSER Stainless Steel Handle No Trim Non Dispenser JS48SEFXDA OVERLAY DISPENSER No Handle Silver Etched Black JS48CSDBDA No Handle Silver Etched White JS48CSDWDA NON DISPENSER No Handle Silver Etched Non Dispenser JS48CSFXDA FRAMED DISPENSER Silver Etched Black JS48FSDBDA Black Black JS48FBDBDA White White JS48FWDWDA NON DISPENSER Silver Etched Non Dispenser JSA8FSFXDA Black Non Dispenser JS48FBFXDA White Non Dispenser JS48FWFXDA STAINLESS STEEL DISPENSER Pro Style Handle No Trim Black JS42PPDBDA 42 models NON DISPENSER Pro Style Handle No Trim Non Dispenser JS42PPFXDA DISPENSER Stainless Steel Handle No Trim Black JS42SEDBDA NON DISPENSER Stainless Steel Handle No Trim Non Dispenser JS42SEFXDA OVERLAY DISPENSER No Handle Silver Etched Black JS42CSDBDA No Handle Silver Etched White JS42CSDWDA NON DISPENSER Silver Etched Non Dispenser JS42CSFXDA FRAMED DISPENSER Silver Etched B
38. ure the doors are properly adjusted If not adjust the top and bottom hinges The hinges are slotted for side to side movement First remove the small Phillips screw on the door hinge which is in board on the hinge and throw it away Adjust the upper and lower hinges by loosening the three large Torx screws Tighten the screws after the doors are adjusted Door handles can be adjusted to level top handle trim The doors are slotted tor handle alignment INSTALLATION GUIDE PROPER POSITIONING Leveling Slide the unit in place and raise the front and rear levelers until the unit touches the brackets Use a socket for raising and lowering the unit On each wheel housing there are two hex bolts On the left side the outside bolt will move the rear leveler and the inside bolt will move the tront leveler On the right side the outside bolt adjusts the tront lev eler and the inside bolt will move the rear leveler FIG 5 The front levelers must be in contact with the floor To raise the leveling legs turn the hex screw in the counter clockwise direction Place level on lower ledge of the machine compartment Level the unit front to back and side to side This is to prevent tipping of the unit See FIG 4 Install the kickplate The kickplate must be removable to allow access to the water valves In the machine compartment there is an on off power switch Make sure the switch is in the ON position and switch lever is up Install t
Download Pdf Manuals
Related Search