Kenwood KDC-MP443U CD Player User Manual
Contents
1. Item Setting Entry Setting overview Condition f Page CODE SET Sets Resets security code EB 10 11 CODE CLR SKIP 0 5 1 Sets the ratio of skip performed with lt Music Search gt gcn 8 0 DIM OFF ON Adjusts the brightness of the display according to the surrounding illumination ICON OFF ON1 Sets the Graphics mode of the display 15 OND SWPRE Re SW Sets the preout output TSB EE SPRM OFF ON Turns ON OFF the Supreme function Cw 15 AUTON AUTO2 AUTO1 AUTO2 Selects the tuning mode of the radio 15 MANUAL MANUAL GSC OFF Z ON Switches to Monaural to decrease noise when reception is poor NAME SET Sets the display when switched to AUX source 7 de AUTO MANU Specifies whether the text is scrolled automatically AUX OFF ON1 Sets whether to display AUX during source selection Gp 5 OND CD READ ile ee Sets the CD read mode Gp 5 DEMO OFF ON Specifies whether to enable demonstration 11 Function of KDC MP5043U MP543U La Coa Displayed item is depending on currently selected source or mode The mark in Condition column shows the condition to which the item is displayed Can be set in other than standby state Can be set in standby state Can be set while Audio file source of CD USB excluding iPod USB source used when the iPod is con2. Other Functions Activating Security Code When Security Code is set possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off You can set the Security Code with a 4 digit number of your choice The Security Code cannot be displayed or referenced Make a note of the Security Code and treasure it up 1 Select Standby Press the SRC button Select the STANDBY display 2 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 3 Select Security Code mode Press the FM or AM button Select the CODE SET display 4 Enter Security Code mode Press the AUD knob for at least 1 second When ENTER is displayed CODE is also displayed 5 Enter Security Code Operation type Operation Select the digits to enter Press the kaa or gt gt button Select the Security Code Press the FM or AM button numbers 6 Confirm the Security Code Press the AUD knob for at least 3 seconds When RE ENTER is displayed CODE is also displayed 7 Do the step 5 through 6 operation and reenter the Security Code APPROVED is displayed The Security Code function activates If you enter the wrong Code in steps 5 through 6 repeat from step 5 When the Security Code function is activated CODE SET changes to CODE CLR To deactivate the Security Code fun
3. GaAlAs Digital filter D A 8 Times Over Sampling D A Converter 24 Bit Spindle speed 500 200 rpm CLV Wow amp Flutter Below Measurable Limit Frequency response 1 dB 20 Hz 20 kHz Total harmonic distortion 1 kHz 0 01 Signal to Noise ratio 1 kHz 105 dB Dynamic range MP3 decode Compliant with MPEG 1 2 Audio Layer 3 WMA decode Compliant with Windows Media Audio 22 KDC MP5043U KDC MP543U KDC MP443U USB Standard USB1 1 2 0 Full speed Maximum Supply current 500 MA File System FAT16 32 MP3 decode Compliant with MPEG 1 2 Audio Layer 3 WMA decode Compliant with Windows Media Audio Audio section Maximum output power 50Wx4 Full Bandwidth Power at less than 1 THD 22Wx4 Speaker Impedance 4 8Q Tone action Bass 100 Hz 8 dB Middle 1 kHz 8 dB Treble 10 kHz 8 dB Preout level Load CD 2000 mV 10 kQ Preout impedance lt 6000 Auxiliary input Frequency response 3 dB 20 Hz 20 kHz Input Maximum Voltage 1200 mV Input Impedance 10 kQ General Operating voltage 11 16V allowable 14 4V Maximum Current consumption 10A Installation Size W x H x D 182 x 53 x 155 mm Weight 1 3 kg Specifications subject to change without notice
4. supply Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing A w o NODU Do not use your own screws Use only the screws provided you use the wrong screws you could damage the unit If the power is not turned ON PROTECT is displayed the speaker wire may have a short circuit or touched the chassis of the vehicle and the protection function may have been activated Therefore the speaker wire should be checked If your car s ignition does not have an ACC position connect the ignition wires to a power source that can be turned on and off with the ignition key If you connect the ignition wire to a power source with a constant voltage supply as with battery wires the battery may die the console has a lid make sure to install the unit so that the faceplate will not hit the lid when closing and opening If the fuse blows first make sure the wires aren t touching to cause a short circuit then replace the old fuse with one with the same rating Insulate unconnected wires with vinyl tape or other similar material To prevent a short circuit do not remove the caps on the ends of the unconnected wires or the terminals Connect the speaker wires correctly to the terminals to which they correspond The unit may be damaged or fail to work if you share the wires or ground them to any metal pa
5. Selection of folder flie Return to previous folder Return to root folder amp ON Indicates that a folder exists above the currently selected folder OFF Indicates that no folder exists above the currently selected folder ON Indicates that a folder exists under the currently selected folder J OFF Indicates that the currently displayed folder is not followed by a folder or file g Blinking Indicates that your selection is a file Internal CD source Operation type Operation Movement between track Turn the AUD knob or press the FM AM button Selection of folder flie Press the AUD knob Return to first track Press the kea button for at least 1 second Cancelling the Music Search mode Press the Search button Music Search cannot be performed during Random play or scan play Function of KDC MP5043U MP543U Function of iPod Music Search for iPod Search for the song in iPod you want to play 1 Enter Music Search mode Press the Search button SEARCH is displayed 8 KDC MP5043U KDC MP543U KDC MP443U 2 Search for music Operation type Operation Movement between items Turn the AUD knob Skip Search Press the ea or gt gt button Selection of item Press the AUD knob Return to previous item Press the FM button Return to Top menu Press the FM button for at least 1 second Search by initial Press the Search but
6. of each source will be changed to the clock display If the selected display item does not have any information alternative information is displayed When selecting Folder Name while playing with iPod names will be displayed depending on currently selected browsing items If the iPod Control by Hand Mode is set to on while playing the iPod iPodMODE is displayed If all characters cannot be displayed while playing with iPod the file number in the list is displayed Information Display usic title TILES Folder name SELDE File name FILER S Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source 1 Select Auxiliary input source Press the SRC button Select the AUX display 2 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 3 Select Auxiliary input display setting mode Press the FM or AM button Select the NAME SET display 4 Enter Auxiliary input display setting mode Press the AUD knob for at least 1 second Information Display Frequency FREQ Clock CLOCK In CD amp External disc source Information Display Disc title D TITLE Track title T TITLE Play time amp Track number P TIME Clock CLOCK In Audio file source Information Display Music title amp Artist name TITLE Album name amp Artis
7. KENWOOD CD RECEIVER KDC MP5043U KDC MP543U KDC MP443U INSTRUCTION MANUAL Kenwood Corporation Contents Before use 3 Appendix 14 Basic Operation 4 Accessories Installation Procedure 17 G functi A n O E E Connecting Wires to Terminals 18 EEC fE play angio Installation Removing the Unit 19 Menu System 6 Troubleshooting Guide 20 Clock Display Settings 7 Specifications 22 Manual Clock Adjustment Text Display Selection Auxiliary Input Display Setting Music disc Audio file Operation 8 usic Search usic Search for iPod All Random iPod Control by Hand Mode Direct Music Search Direct Disc Search Basic Operation of Disc Changer Optional Tuner Operation 10 Frequency Step Setting Other Functions 10 Activating Security Code Deactivating Security Code Demonstration mode setting Audio Adjustments 12 Audio Control Audio Setup Speaker Setting Basic Operations of remote control 13 iPod is a trademark of Apple Inc registered in the U S and other countries Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards 2 KDC MP5043U KDC MP543U KDC MP443U Before use AWARNING To prevent injury or fire take the f
8. Nissan cars Accessory for Nissan car Accessory for Toyota car Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level Upper the frame and pull it forward as shown in the figure Accessory Removal tool 2 When the upper level is removed remove the lower two locations The frame can be removed from the bottom side in the same manner Removing the Unit 1 Refer to the section lt Removing the hard rubber frame gt and then remove the hard rubber frame 2 Insert the two removal tools deeply into the slots on each side as shown 3 Lower the removal tool toward the bottom and pull out the unit halfway while pressing towards the inside Accessory Be careful to avoid injury from the catch pins on the removal tool 4 Pull the unit all the way out with your hands being careful not to drop it English 19 Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit 1 Cannot set up the subwoofer Cannot set up the low pass filter No output from the subwoofer gt lt Subwoofer output gt of lt Basic Operation gt page 4 is not set to On Preout is not set to subwoofer 1 SWPRE of lt Menu system gt page 6 a Cannot register a security code Cannot set up Display gt lt Demonstration mode setting gt page 11 is not turned off 20 KDC MP5043
9. U KDC MP543U KDC MP443U What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems General 2 The Touch Sensor Tone does not sound VW The preout jack is being used ts The Touch Sensor Tone cannot be output from the preout jack Tuner source H Radio reception is poor WY The car antenna is not extended ts Pull the antenna out all the way Disc source H The specified disc does not play but another one plays instead VW The specified CD is quite dirty ts Clean the CD referring to the CD cleaning of the W the disc is loaded in a different slot from that specified ts Eject the disc magazine and check the number ts Try another disc instead Audio file source H The sound skips when an Audio file is being played VW The media is scratched or dirty ts Clean the media referring to the CD cleaning of VW The recording condition is bad ts Record the media again or use another media Troubleshooting Guide The messages shown below display your systems condition TOC ERR IN Blink No disc has been loaded in the disc magazine The CD is quite dirty The CD is upside down The CD is scratched a lot The disc is unreadable The unit is malfunctioning for some reason Press the reset button on the unit If the E 77 code does not disappear consult your neares
10. abet may become long depending on the number of songs in iPod or the folder structure When selecting an initial in the alphabet search mode entering searches symbols and entering 1 searches digits If the first character string begins with an article a an or the in the alphabet search mode it is searched for in defiance of the article Characters that are included in a song name but cannot be displayed are left blank If no character included in a song name cannot be displayed the browse item name and digits are displayed Items Display Items Display Playlists PLIST Podcast PDCT Artists ART Genre GEN Albums ALB Composer COM Music title or filename PRGM Function of KDC MP5043U MP543U Function of iPod All Random All songs in iPod are played at random Press the 3 button for at least 3 seconds Pressing the button toggles the setting between All random play on ALL RDM and off RDM OFF The time required to turn on the all random function may become longer depending on the number of songs in iPod or the folder structure Turning on the all random function changes the iPod browse item to songs This browse item will not change even if the all random function is turned off If the browse item is changed to search for music while the all random function is on the all random function is turned
11. be used This unit can only play the CDs with gigg di This unit may not correctly play discs which do not have the mark You cannot play a CD R or CD RW that has not been finalized For the finalization process refer to your CD R CD RW writing software and your CD R CD RW recorder instruction manual English 3 Basic Operation SRC Release FM AM Disc slot 4 USB Terminal Search DISP AUD ma a gt gt gt General functions Power Source Select button SRC Turns on the power When the power is on the source switches between Tuner TUNER USB or iPod USB or iPod CD CD Auxiliary input AUX and Standby STANDBY each time this button is pressed Press at least 1 second to turn off the power When an optional accessory is connected the source name for each device appears When connection of the iPod is recognized the source display changes from USB to iPod Function of KDC MP5043U MP543U Volume control AUD knob Turn the knob to adjust the volume Subwoofer output AM Switches between ON SW ON and OFF SW OFF each time this button is pressed for at least 2 seconds You can do this function when SWPRE in lt Menu System gt page 6
12. ction see the next section lt Deactivating Security Code gt 8 Exit Security Code mode Press the Search button Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON 2 Do the step 5 through 6 operation and enter the Security Code APPROVED is displayed Now you can use the unit Deactivating Security Code To deactivate the Security Code function 1 Select Standby Press the SRC button Select the STANDBY display 2 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 3 Select Security Code mode Press the FM or AM button Select the CODE CLR display 4 Enter Security Code mode Press the AUD knob for at least 1 second When ENTER is displayed CODE CLR is also displayed 5 Enter Security Code Operation type Operation Select the digits to enter Press the kea or gt gt button Select the Security Code Press the FM or AM button numbers 6 Press the AUD knob for at least 3 seconds CLEAR is displayed The Security Code function deactivates 7 Exit Security Code mode Press the Search button Ifa wrong security code is entered ERROR is displayed Enter a correct security code Demonstration mode setting Setting the demonstration mod
13. d USB device removing 4 Press this button for 2 seconds or longer to select the remove mode and the remove the USB device During the remove mode REMOVE is displayed Music search l lt lt 4 gt gt Changes the music when this button is pressed Fast reverses or forwards the music while pressing No sound is output while playing audio file Folder search FM AM Changes the folder containing the audio file Search mode Search After pressing this button you can quickly search songs with the AUD knob See lt Music Search gt page 8 for details Track File Folder repeat play 4 Switches between Track Repeat TRAC REP and OFF REP OFF when pressed while playing a CD Switches between File Repeat FILE REP Folder Repeat FOLD REP and OFF REP OFF when pressed while playing an audio file The folder repeat operation cannot be performed while iPod is playing Scan play 2 Successively plays the intro of the music in the disc or folder When Scan Play is turned on TRAC SCN FILE SCN is displayed The Scan play operation cannot be performed while iPod is playing Random play 3 Randomly plays the music in the disc or folder When Random Play is turned on DISC RDM FOLD RDM is displayed English 5 Menu System Set up the following functions
14. d during playing of Random play or scan play Input 0 to select disc 10 Function of KDC MP5043U MP543U Basic Operation of Disc Changer Optional Selecting CD changer source Press the SRC button Select the CD CH display Music search Press the ka a or gt gt button Disc Search Press the FM or AM button Playing the Current Song or Disc Repeatedly Repeat play Press the 4 button Pressing the button repeatedly selects Track Repeat play on TRAC REP Disc Repeat play on DISC REP and Repeat play off REP OFF sequentially Randomly plays the music in the disc changer Magazine random play Press the 5 button Pressing the button toggles the setting between Magazine random play on MGZN RDM and off RDM OFF English 9 Tuner Operation Frequency Step Setting Changing the tuning frequency step The original setting is FM band 50 kHz and AM band 9 kHz 1 Turn the power OFF Press the SRC button for at least 1 second 2 Switch the frequency step While pressing the 1 and 5 buttons press the SRC button Release your fingers from the button after the display appears The frequency step changes to FM band 200 kHz and AM band 10 kHz When the same operation is repeated the frequency step returns to the original setting When the frequency step is changed the frequencies in the memory are deleted 10 KDC MP5043U KDC MP543U KDC MP443U
15. e as follows Display Setting DEMO ON The Demonstration mode function is ON DEMO OFF Exit Demonstration mode Normal mode 1 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 2 Select Demonstration mode Press the FM or AM button Select the DEMO display 3 Set the Demonstration mode Press the AUD knob for at least 2 seconds 4 Exit Demonstration mode Press the Search button English 11 Audio Adjustments Audio Control You can adjust following Audio Control items Audio Setup You can set Sound system such as follows Adjustment Item Display Range Adjustment Item Display Range Subwoofer level SWE 15 15 Low Pass Filter LPF 80 120 160 Through OFF Hz Bass Boost B BOOST B B V1 OFF The Volume offset N OFF 8 0 AUX 8 8 indicator turns on according to the setting System Q NATURAL ROCK Natural Rock Pops Easy Volume offset Sets each source s volume as a difference POPS EASY Top 40 Jazz Game User fram the basicvolume TOP40 JAZZ setting GAME USER 1 Select the source to adjust Bass level BAS L 8 8 Press the SRC button Middle level i l a 2 Enter Audio Setup mode Treble level REL 8 8 Balance BAI eft 15 Right 15 Press the AUD knob for at least 1 second Fader FAD Rear 15 Fr
16. gt FM AM a xan J KDC MP5043U g Ea Om Not used KDC MP443U 3 KDC MP543U g Tf eee SS General control Volume control VOL Source select SRC Volume reduce ATT When the button is pressed again the volume returns to the previous level In Audio control Audio item select AUD Adjust the Audio item VOL Refer to lt Audio Control gt page 12 for the operation method such as the procedures for Audio control and others operations In Tuner source Band select FM AM Station select lt lt gt 1 Recall preset stations 1 6 In CD USB source Music select ka gt gt 1 Folder Disc select FM AM Pause Play gt 11 About KA KDC MP5043U MP543U This button is used when Bluetooth HANDS FREE BOX is connected For more information refer to the instruction manual of Bluetooth HANDS FREE BOX About KDC MP443U Not used A Do not set the remote control in hot places such as on the dashboard Loading and Replacing battery Use two AA R6 size batteries Slide the cover while pressing downwards to remove it as illustrated Insert the batteries with the and poles aligned properly following the illustration inside the case English 13 Appendix About Audio file e Playable Audio file P3 mp3 WMA wma e Playable disc media CD R RW ROM Playable disc file format SO 9660 Level 1 2 Joliet Romeo Long f
17. he iPod has failed gt Check that the connected iPod is an iPod that is supported See lt About Audio file gt page 14 for information on supported iPods NO MUSIC E 15 USB ERR iPod ERR The connected USB device contains no playable audio file Media was played that does not have data recorded that the unit can play Some trouble may have occurred to the connected USB device gt Remove the USB device then cycle the power switch to ON If the same display is repeated use another USB device Connection to the iPod has failed gt Remove the USB device and then reconnect it Confirm that the software for the iPod is the latest version REMOVE Blink The Remove mode has been selected for the USB device iPod You can remove the USB device iPod safely English 21 Specifications FM tuner section USB Interface Frequency range 200 kHz space 87 9 MHz 107 9 MHz 50 kHz space 87 5 MHz 108 0 MHz Usable sensitivity S N 30dB 9 30 Bf 0 8 uV 75 Q Quieting Sensitivity S N 50dB 15 20 Bf 1 6 uV 75 Q Frequency response 3 dB 30 Hz 15 kHz Signal to Noise ratio MONO 70 dB Selectivity 400 kHz gt 80 dB Stereo separation 1 kHz 40 dB AM tuner section Frequency range 10 kHz space 530 kHz 1700 kHz 9 kHz space 531 kHz 1611 kHz Usable sensitivity S N 20dB 28 dBu 25 uV CD player section Laser diode
18. ile name e Playable USB device USB mass storage class e Playable USB device file system FAT 16 FAT32 iPod Playable Model DC MP5043U MP543U Although the audio files are complied with the standards listed above the play maybe impossible depending on the types or conditions of media or device e Playing order of the Audio file In the example of folder file tree shown below the files are played in the order from to 40 ecp O Folder L_ da ed Audio file Ep DO L 4 D0 1 do L do An online manual about audio files is put on the site www kenwood com audiofile On this online manual detailed information and notes which are not written in this manual are provided Make sure to read through the online manual as well In this manual the word USB device is used for flas memories and digital audio players which have USB terminals The word iPod appearing in this manual indicates the iPod connected with the iPod connection cable optional accessory Not supported model KCA iP500 Refer to the web site for connectable iPod and iPod connection cable www kenwood com ipod kca_ip 14 KDC MP5043U KDC MP543U KDC MP443U About USB device If you start playback after connecting the iPod the music that has been played by the iPod is played first In this case RESUMING is displayed without displaying a folder name etc Changing the browse item
19. is set to SW Auxiliary input Connect a portable audio device with mini plug cable 3 5 Use the mini plug cable which is stereo type and does not have any resistance The auxiliary input requires the setting made in AUX of lt Menu system gt page 6 4 KDC MP5043U KDC MP543U KDC MP443U 1 2 3 4 5 6 Auxiliary input Faceplate release Release Releases the faceplate lock so that it can be removed Refer to the following diagram when reattaching the faceplate A The faceplate is a precision piece of equipment and can be damaged by shocks or jolts Keep the faceplate in its faceplate case while detached Do not place the faceplate and the faceplate case in areas exposed to direct sunlight excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing To prevent deterioration do not touch the terminals of the unit or faceplate with your fingers Switching display DISP Changing the information displayed Refer to page 7 for the details of the display setting Text Title scroll DISP Scrolls the CD and audio file text display when pressed for at least 1 second Muting volume upon reception of phone call When there is a call CALL is displayed and the audio system is paused When the call ends CALL disappears and the audio system comes back on The audio system comes back on when SRC is pressed d
20. lish 15 Appendix The marking of products using lasers Except for some areas CLASS 1 LASER PRODUCT The label is attached to the chassis case and says that the component uses laser beams that have been classified as Class 1 It means that the unit is utilizing laser beams that are of a weaker class There is no danger of hazardous radiation outside the unit 16 KDC MP5043U KDC MP543U KDC MP443U Accessories Installation Procedure Accessories PARADES 1 P T Installation Procedure 1 To prevent a short circuit remove the key from the ignition and disconnect the battery 2 Make the proper input and output wire connections for each unit Connect the speaker wires of the wiring harness Connect the wiring harness wires in the following order ground battery ignition Connect the wiring harness connector to the unit Install the unit in your car Reconnect the battery Press the reset button AWARNING If you connect the ignition wire red and the battery wire yellow to the car chassis ground you may cause a short circuit that in turn may start a fire Always connect those wires to the power source running through the fuse box A Mounting and wiring this product requires skills and experience For safety s sake leave the mounting and wiring work to professionals Make sure to ground the unit to a negative 12V DC power
21. nected Can be set during Tuner source Can be set during FM reception Can be set while accessing AUX source Can be set during all sources afi ES gt Cc x Refer to the respective page for information on how to set the items with reference page number Only the items available to the current source are displayed Strong electrical fields such as from power lines may cause unstable sound quality when CRSC is turned ON In such a situation turn it OFF 6 KDC MP5043U KDC MP543U KDC MP443U Can be set only during playback of the iPod source Press the Search button for at least 1 second MENU is displayed 2 Select the menu item Press the FM or AM button 3 Set the menu item Press the ka a or gt gt button 4 Exit menu mode Press the Search button Clock Display Settings Manual Clock Adjustment 1 Select the Clock display Press the DISP button 2 Enter Clock adjustment mode Press the DISP button for at least 1 second The clock display blinks 3 Adjusting Clock Operation type Operation Adjust the hours Press the FM or AM button Adjust the minutes Press the kaa or gt gt button 4 Exit Clock adjustment mode Press the DISP button Text Display Selection Changes displayed information on each source following In Tuner source When you select the clock display the display setting
22. off and the songs in the browse item are played at random Function of KDC MP5043U MP543U Function of iPod iPod Control by Hand Mode Allows you to operate iPod with the control on the iPod Press the 1 button Pressing the button toggles the setting between iPod control by hand mode on HANDS ON and off MODE OFF In the iPod Control by hand mode iPod cannot be operated using this unit This mode is not compatible with music information display The display will show iPodMODE The following iPods cannot be controlled using this unit iPod nano 1st generation and iPod with video iPod can be operated when it conforms to the iPod control function Function of remote control Direct Music Search Searchs the music by entering the track number 1 Enter the music number Press the number buttons on the remote control 2 Search the music Press the ka a or gt gt button Cancelling Direct Music Search Press the gt I button Direct Music Search cannot be performed during playing of iPod Random play or scan play Function of KDC MP5043U MP543U Function of disc changers with remote control Direct Disc Search Searchs the disc by entering the disc number 1 Enter the disc number Press the number buttons on the remote control 2 Search the disc Press the FM or AM button Cancelling Direct Disc Search Press the gt I button Direct Disc Search cannot be performe
23. ogging this condensation on the lens may not allow CDs to play In such a situation remove the disc and wait for the condensation to evaporate If the unit still does not operate normally after a while consult your Kenwood dealer If you experience problems during installation consult your Kenwood dealer When you purchase optional accessories check with your Kenwood dealer to make sure that they work with your model and in your area The characters which can be displayed by this unit are A Z 0 9 amp lt gt The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used Therefore what appears on the display in the illustrations may differ from what appears on the display on the actual equipment and some of the illustrations on the display may be inapplicable Handling CDs Do not touch the recording surface of the CD Do not stick tape etc on the CD or use a CD with tape stuck on it Do not use disc type accessories Clean from the center of the disc and move outward When removing CDs from this unit pull them out horizontally If the CD center hole or outside rim has burrs use the CD only after removing the burrs with a ballpoint pen etc CDs that cannot be used CDs that are not round cannot be used CDs with coloring on the recording surface or CDs that are dirty cannot
24. ollowing precautions To prevent a short circuit never put or leave any metallic objects such as coins or metal tools inside the unit Before using this unit for the first time This unit is initially set on the Demonstration mode When using this unit for the first time cancel the lt Demonstration mode setting gt page 11 How to reset your unit If this unit or the connected unit disc auto changer etc fails to operate properly press the Reset button The unit returns to factory settings when the Reset button is pressed TE KENWOOD Reset button Cleaning the Unit If the faceplate of this unit is stained wipe it with a dry soft cloth such as a silicon cloth If the faceplate is stained badly wipe the stain off with a cloth moistened with neutral cleaner then wipe it again with a clean soft dry cloth A Applying spray cleaner directly to the unit may affect its mechanical parts Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty wipe them with a clean soft dry cloth Lens Fogging When you turn on the car heater in cold weather dew or condensation may form on the lens in the CD player of the unit Called lens f
25. ont 15 3 Select the Audio Setup item to adjust Exit Audio Control mode Volume control mode Press the AUD knob Source tone memory Puts the set up value in the memory per source USER This appears when Bass level Middle level and Treble level are adjusted When USER is selected these levels are recalled 1 Select the source to adjust Press the SRC button 2 Enter Audio Control mode Press the AUD knob 3 Select the Audio item to adjust Press the AUD knob 4 Adjust the Audio item Turn the AUD knob 5 Exit Audio Control mode Press any button Press a button other than the AUD knob 12 KDC MP5043U KDC MP543U KDC MP443U 4 Adjust the Audio setup item Turn the AUD knob 5 Exit Audio Setup mode Press the AUD knob for at least 1 second Speaker Setting Fine tuning so that the System Q value is optimal when setting the speaker type as follows Speaker type Display OFF SP OFF For 5 amp 4 in speaker SP 5 4 For 6 amp 6x9 in speaker SP 6 9 6 For the OEM speaker SP OEM 1 Enter Standby Press the SRC button Select the STANDBY display 2 Enter Speaker Setting mode Press the AUD knob 3 Select the Speaker type Turn the AUD knob 4 Exit Speaker Setting mode Press the AUD knob Basic Operations of remote control voL SRC ATT ATT VOL AUD O AD G gt il N M C M aa mp lt gt
26. p or down FM or AM button Control knob towards left or right aa or gt gt I button For operating KCA BT100 Optional To control KCA BT100 operate as follows To make setting for lt Selecting the Dialing Mode gt select lt Menu system gt page 6 Pressing the AUD knob for at least 1 second after selecting he D MODE item allows you to enter the dialing method selection mode To exit from dialing method selection mode press Search button To make lt Disconnecting a Call gt lt Clearing the Disconnection Message gt and lt Rejecting an ncoming call gt press DISP button for at least 1 second oreover some displays are different from the description of KCA BT100 Instruction Manual Displays of KCA BT100 Instruction Actual displays on this unit Manual DISCONCT HF D CON CONNECT HE CON PHN DEL DVCDEL P STATUS D STATUS BI CON Y HE CON Y BI CON N HE CON N Menu Glossary e ICON Sets the Graphics mode of the display during normal playback condition ON1 Turns on ON2 Displays an animation OFF Turns off SWPRE Switching Preout Switches the preout between rear output R and subwoofer output SW SPRM Supreme Technology to extrapolate and supplement with proprietary algorithm the high frequency range hat is cut off when encoding at low bit rate less han 128Kbps Sampling freq
27. rear right speaker If no connections are made do not let the wire come out from the tab When using the optional power amplifier connect to its power control Power control wire Blue White terminal P CONT ANT CONT Depending on what antenna you are using connect either to the control terminal of the motor antenna or to the power terminal for the booster amplifier of the film or short pole type antenna Motor antenna control wire Blue TEL mute wire Brown Connect to the terminal that is grounded when either the telephone rings or during conversation E gt To connect the Kenwood navigation system consult your navigation manual Car fuse box Ignition wire Red ACC Battery wire Yellow Car fuse box Main fuse Ground wire Black To car chassis Battery 18 KDC MP5043U KDC MP543U KDC MP443U Installation Removing the Unit non Japanese cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place Make sure that the unit is installed securely in place If the unit is unstable it may malfunction for example the sound may skip Japanese cars 1 Refer to the section lt Removing the hard rubber frame gt and then remove the hard rubber frame 2 Align the holes in the unit two locations on each side with the vehicle mounting bracket and secure the unit with the accessory screws T Toyota cars N
28. rt in the car When only two speakers are being connected to the system connect the connectors either to both the front output terminals or to both the rear output terminals do not mix front and rear For example if you connect the connector of the left speaker to a front output terminal do not connect the connector to a rear output terminal After the unit is installed check whether the brake lamps blinkers wipers etc on the car are working properly Mount the unit so that the mounting angle is 30 or less About CD players disc changers connected to this unit If the CD player disc changer has the O N switch set it to the N position The functions you can use and the information that can be displayed may differ depending on the models being connected English 17 Connecting Wires to Terminals AUX input Stereo Use the mini plug cable which is stereo type and does not have any resistance FM AM antenna input Front side Front output O10 KDC MP5043U MP543U only Fuse 10A Rear output Sub Woofer output HE 1___Wiring harness To Kenwood disc changer External optional accessory Accessory KDC MP5043U MP543U only S ED P connect these leads refer to the relevant instruction manuals White White Black ST front left speaker Gray Gray Black Bro front right speaker Green Green Black Bro rear left speaker Purple Purple Black Bro
29. t name ALBUM Folder name FOLDER File name FILE Play time amp Music number P TIME Clock CLOCK In Standby Auxiliary input source Information Display Source name SRC NAME Clock CLOCK Select the text Press the DISP button The presently selected Auxiliary input display is displayed 5 Select the Auxiliary input display Press the ka a or gt gt button AUX DVD PORTABLE GAME VIDEO TV 6 Exit Auxiliary input display setting mode Press the Search button When operation stops for 10 seconds the name at that time is registered and the Auxiliary input display setting mode closes The Auxiliary input display can be set only when the built in auxiliary input or the auxiliary input of optional KCA S220A is used On the KCA S220A AUX EXT is displayed by default English 7 Music disc Audio file Operation Function of Audio file Internal CD source Music Search Selecting the music you want to listen to from the device or media being played now 1 Enter Music Search mode Press the Search button SEARCH is displayed Displays the current Audio file name 2 Search for music Audio file Operation type Operation Movement between urn the AUD knob or press the FM folders files AM button Press the AUD knob or gt button Press the kaa button Press the kaa button for at least 1 second
30. t service center Something is wrong with the disc magazine Or the unit is malfunctioning for some reason gt Check the disc magazine And then press the reset button on the unit If the E 99 code does not disappear consult your nearest service center The CD player section is not operating properly Reinsert the CD If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted please switch off the power and consult your nearest service center PROTECT Blink NA FILE COPY PRO READ ERR NO DVICE The speaker wire has a short circuit or touches the chassis of the vehicle and then the protection function is activated Wire or insulate the speaker cable properly and press the reset button If the PROTECT code does not disappear consult your nearest service center An Audio file is played with a format that this unit can t support A copy protected file is played The file system of the connected USB device is broken Copy the files and folders for the USB device again If the error message is still displayed initialize the USB device or use other USB devices The USB device is selected as a source although no USB device is connected gt Change the source to any source other than USB Connect an USB device and change the source to USB again NA DVICE An unsupported USB device is connected Connection to t
31. ton for at least 1 second The position of the currently displayed item is indicated by the icon bar in eight steps SS SES ESS H gt gt gt gt g a 74 7 y RE PP Ri Syme Ea ad Qn Cancelling the Music Search mode Press the Search button Searching for Music by Initial You can select an alphabetic character from the list in the browse item artist album etc selected now 1 Enter alphabet search mode Press the Search button for at least 1 second ABC is displayed If you can not search for a song by an alphabetic character in the browse item selected now the data on the screen does not change 2 Select the initial to be searched for Operation type Operation Move to the next character Turn the AUD knob or press the lt gt I button Move to the next row Press the FM or AM button Cancelling the alphabet search mode Press the Search button 3 Determine the selected initial Press the AUD knob Start search When search is completed the music search mode is selected again at the selected character position 1 Skip Search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected now Set the ratio with SKIP in lt Menu System gt page 6 Keep pressing this button for 3 seconds or longer skips songs at 10 irrespective of the setting The time of search by alph
32. uency is 44 1kHz Supplementing is optimized by compression ormat MP3 or WMA and processed according to bit rate The effect is negligible with music that is encoded at high bit rate variable bit rate or has minimal high requency range e AUTO1 AUTO2 MANUAL Tuning mode select Select a tuning mode of the radio Tuning mode Display Operation Auto seek AUTO1 Automatic search for a station Preset station seek AUTO2 Search in order of the stations in the Preset memory Manual MANUAL Normal manual tuning control AUX When this is set to ON AUX source can be selected ON1 Outputs the sound of external unit connected to the AUX terminal when switched to AUX source ON2 Activates the attenuator function when switched to AUX source Turn off the attenuator function when listening to output from external unit This prevents the noise when no external unit is connected to AUX terminal OFF Disables the selection of AUX source Set to OFF when not using the AUX terminal CD READ Sets the method for reading CD When unable to play special format CD set this function to 2 to force playing Note that some music CD may be unplayable even when set to 2 In addition audio files cannot be played when set to 2 Normally keep this set to 1 1 Automatically distinguishes between audio file disc and music CD when playing disc 2 Forces playing as music CD Eng
33. uring a call To use the TEL Mute feature you need to hook up the MUTE wire to your telephone using a commercial telephone accessory Refer to lt Connecting Wires to Terminals gt page 18 Tuner functions FM band FM Switches between FM1 FM2 and FM3 each time the FM button is pressed AM band AM Switches to AM Tuning l lt lt gt gt Changes the frequency Use the AUTO1 AUTO2 7 MANUAL in lt Menu system gt page 6 to change the frequency switching During reception of stereo stations the ST indicator is ON Preset memory 1 6 emorizes the station selected when pressing for at east 2 seconds Auto memory entry FM emorizes 6 stations with good reception automatically when pressed for at least 2 seconds Preset tuning 1 6 Recalls the memorized station Disc play Disc slot Starts playing when a disc is inserted When a CD is inserted the IN indicator is ON 3 inch 8 cm CD cannot be used Attempt to insert using an adapter can cause malfunction Disc ejection 4 You can eject the disc for 10 minutes after switching off the engine USB device iPod play USB Terminal Connecting a USB device starts playback For the playable audio file media and devices refer to lt About Audio file gt page 14 Function of KDC MP5043U MP543U Pause and play 6 Switches between pause and play each time this button is presse
34. will display a correct title etc You cannot operate iPod if KENWOOD or s is displayed on iPod When the USB device is connected to this unit it can be charged up provided that this unit is powered Install the USB device in the place where it will not prevent you from driving your vehicle properly You cannot connect a USB device via a USB hub and Multi Card Reader Take backups of the audio files used with this unit The files can be erased depending on the operating conditions of the USB device We shall have no compensation for any damage arising out of erasure of the stored data No USB device comes with this unit You need to purchase a commercially available USB device When connecting the USB device usage of the CA U1EX option is recommended ormal playback is not guaranteed when a cable other than the USB compatible cable is used Connecting a cable whose total length is longer than 5 m can result in abnormal playback For operating KCA BT200 Optional For operation refer to Model A 1 in the Instruction Manual of KCA BT200 and the table below The AUTOJ TI button should be replaced with SRC button for lt Answering the Waiting Call after Terminating the Current Call gt Notation used in the KCA BT200 Operation Instruction Manual P button AUD knob Control knob AUD knob AUTO TI button DISP button Control knob towards u
Download Pdf Manuals
Related Search